SESIN 06
2D
CONTENIDO:
COMANDOS DE DIBUJO Y EDICION - III
PRACTICA:
2013
AutoCAD 2D 2013
Dibujo Asistido por Computadora
2D
ARRAY (AR)
Es un comando de Edicin Avanzada que permite copiar objetos siguiendo un patrn
predeterminado. Esta nueva versin de AutoCAD 2013 nos trae 3 tipos de Arrays. Si el copiado se
realiza distribuyendo en filas y columnas se le llama Rectangular Array, si el copiado de objetos se
realiza distribuyendo alrededor de un punto central se le llama Polar Array y si el copiado de objetos
se realiza distribuyendo a lo largo de una trayectoria se le llama Path Array.
Polar Array
Rectangular Array
Path Array
Tipos:
1)
SESION - 06
1 / 12
2013
AutoCAD 2D 2013
Dibujo Asistido por Computadora
2D
Array generado:
Command: AR
Select objects: Specify opposite corner: 6 found
Select objects: Enter array type [Rectangular/PAth/POlar] <Rectangular>: R
Type = Rectangular Associative = Yes
Select grip to edit array or
[ASsociative/Basepoint/COUnt/Spacing/COLumns/Rows/Levels/eXit]<eXit>: COU
Enter number of columns or [Expression] <4>: 4
Enter number of rows or [Expression] <4>: 3
Select grip to edit array or
[ASsociative/Basepoint/COUnt/Spacing/COLumns/Rows/Levels/eXit]<eXit>: S
Specify the distance between columns or [Unit cell] <150>: 125
Specify the distance between rows <60>: 60
Select grip to edit array or
[ASsociative/Basepoint/COUnt/Spacing/COLumns/Rows/Levels/eXit]<eXit>:
MTODO PROCEDIMENTAL PRCTICO
Command: AR
Seleccionar Objeto
R
(Rectangular Array)
COU
(Count = contar)
4
(N de Columnas)
3
(N de Filas)
S
(Spacing = Espaciamiento)
125
(Distancia entre Columnas)
60
(Distancia entre Filas)
SESION - 06
2 / 12
2013
AutoCAD 2D 2013
Dibujo Asistido por Computadora
2D
Permite modificar el
nmero de Filas
Permite modificar la
distancia entre Filas
Permite modificar la
distancia entre Columnas
Permite modificar el
nmero de Columnas
SESION - 06
3 / 12
2013
AutoCAD 2D 2013
Dibujo Asistido por Computadora
2D
4. Editar el dibujo.
Save Changes
(Guardar cambios)
2)
Discard Changes
(Deshechar cambios)
SESION - 06
4 / 12
2013
AutoCAD 2D 2013
Dibujo Asistido por Computadora
2D
Command: AR
Select objects: Specify opposite corner: 6 found
Select objects: Enter array type [Rectangular/PAth/POlar] <Polar>: PO
Type = Polar Associative = Yes
Specify center point of array or [Base point/Axis of rotation]: Clic en el Centro
Select grip to edit array or [ASsociative/Base point/Items/Angle between/Fill
angle/ROWs/Levels/ROTate items/eXit]<eXit>: I
Enter number of items in array or [Expression] <6>: 8
Select grip to edit array or [ASsociative/Base point/Items/Angle between/Fill
angle/ROWs/Levels/ROTate items/eXit]<eXit>: F
Specify the angle to fill (+=ccw, -=cw) or [EXpression] <360>: 360
Select grip to edit array or [ASsociative/Base point/Items/Angle between/Fill
angle/ROWs/Levels/ROTate items/eXit]<eXit>:
MTODO PROCEDIMENTAL PRCTICO
Command: AR
Seleccionar Objeto
PO
(Polar Array)
Clic Centro
(Punto C)
I
(Items = Elementos)
8
(N de Elementos)
F
(Fill = Rellenar)
360
(ngulo a Rellenar)
SESION - 06
5 / 12
2013
AutoCAD 2D 2013
Dibujo Asistido por Computadora
2D
OPCIONES:
Stretch Radius: Permite modificar el Radio alrededor del cual se copian los
elementos del Array.
3)
Command: AR
Select objects: Specify opposite corner: 2 found
Select objects: Enter array type [Rectangular/PAth/POlar] <Path>: PA
Type = Path Associative = Yes
Select path curve: Seleccionar la Trayectoria
Select grip to edit array or [ASsociative/Method/Base point/Tangent
direction/Items/Rows/Levels/Align items/Z direction/eXit]<eXit>: I
Specify the distance between items along path or [Expression] <75.0000>: 100 (Dist elem.)
Maximum items = 9
Specify number of items or [Fill entire path/Expression] <8>: 6
(N elementos)
Select grip to edit array or [ASsociative/Method/Base point/Tangent
direction/Items/Rows/Levels/Align items/Z direction/eXit]<eXit>:
SESION - 06
6 / 12
2013
AutoCAD 2D 2013
Dibujo Asistido por Computadora
2D
Permite modificar
la Distancia entre
elementos
OPCIONES:
SESION - 06
7 / 12
2013
AutoCAD 2D 2013
Dibujo Asistido por Computadora
2D
DIVIDE (DIV)
Permite dividir un objeto en un nmero determinado de partes iguales. Este comando no parte el
objeto sino coloca unas marcas (puntos) de manera que se visualice las divisiones. Los objetos que
pueden dividirse con este comando son: lneas, arcos, crculos y polilneas.
Ejemplo 01: Dibujar una lnea de L = 250 y dividirlo en 5 partes iguales.
Command: DIV
Select object to divide:
Enter the number of segments or [Block]: 5
(Nmero de segmentos)
NOTA: Inicialmente los puntos de las divisiones no se aprecian ya que la lnea cubre a dichos
puntos. Para esto debemos cambiar el Estilo de Punto a travs del Men FORMAT /
Poin Style
NOTA: Primero, el dibujo realizado debe convertirse a polilnea, para lo cual debemos utilizar
el comando PEDIT, luego dividimos la polilnea en 10 partes iguales aplicando el
comando DIVIDE.
SESION - 06
8 / 12
2013
AutoCAD 2D 2013
Dibujo Asistido por Computadora
2D
MEASURE (ME)
Permite dividir un objeto indicando la longitud especfica de cada segmento. Al igual que el comando
anterior coloca unas marcas (puntos) que permiten visualizar las divisiones. Los objetos que pueden
dividirse con este comando son: lneas, arcos, crculos y polilneas
Ejemplo 01: La lnea dibujada anteriormente de L = 350 dividirla en segmentos de longitud L = 80
Command: ME
Select object to measure:
Specify length of segment or [Block]: 80
MTODO PROCEDIMENTAL PRCTICO
Command: ME
Seleccionar Objeto
80
(N segmentos)
Ejemplo 02: Dibujar la polilnea mostrada anteriormente y dividirla en segmentos de longitud L = 75
NOTA: Para indicar el lado desde donde se desea iniciar la divisin de los segmentos, debe
seleccionarse el objeto cerca al lado deseado, de esta manera AutoCAD iniciar la
divisin desde la punta del lado indicado.
SESION - 06
9 / 12
2013
AutoCAD 2D 2013
Dibujo Asistido por Computadora
2D
LENGTHEN (LEN)
Permite modificar la longitud de objetos abiertos a travs de 4 mtodos. Los objetos a modificar
pueden ser: lneas, arcos, polilneas abiertas, arcos elpticos, splines abiertas.
Command: LEN
Select an object or [DElta/Percent/Total/DYnamic]:
Mtodos:
1) DELTA (DE)
Permite modificar la longitud de un objeto abierto a travs de un incremento (X) previamente
especificado. Para esto debe hacerse clic en la punta del objeto que se desea modificar.
Ejemplo: A la lnea mostrada de L = 200 agregarle un incremento X = 125
Command: LEN
Select an object or [DElta/Percent/Total/DYnamic]: DE
Enter delta length or [Angle] <0.0000>: 125
Select an object to change or [Undo]: Clic en el lado que se alarga
Select an object to change or [Undo]:
(Delta)
(Incremento)
(Delta)
(Incremento)
NOTA: Si se desea reducir la longitud del objeto debemos considerar el incremento (X)
con un valor negativo.
2) PERCENT (P)
Permite modificar la longitud de un objeto asignando el nuevo porcentaje total con respecto a la
longitud original que representa el 100%.
SESION - 06
10 / 12
2013
AutoCAD 2D 2013
Dibujo Asistido por Computadora
2D
Command: LEN
Select an object or [DElta/Percent/Total/DYnamic]: P
(Percent)
Enter percentage length <100.0000>: 150
(Nuevo porcentaje Total)
Select an object to change or [Undo]: Clic en el lado que se alarga
Select an object to change or [Undo]:
MTODO PROCEDIMENTAL PRCTICO
Command: LEN
P
150
Clic en el Objeto
(Percent)
(Nuevo % Total)
3) TOTAL (T)
Permite modificar la longitud de un objeto asignando la Nueva Longitud Total, sin importar cual
haya sido la longitud inicial.
Ejemplo: Extender la lnea que se muestra hasta una Longitud Total L = 200
Command: LEN
Select an object or [DElta/Percent/Total/DYnamic]: T
Specify total length or [Angle] <25.0000)>: 200
Select an object to change or [Undo]: Clic en el lado que se alarga
Select an object to change or [Undo]:
MTODO PROCEDIMENTAL PRCTICO
Command: LEN
T
(Total)
200
(Nueva Longitud Total)
Clic en el Objeto
ING. JIMMY FERNANDEZ DIAZ
SESION - 06
11 / 12
2013
AutoCAD 2D 2013
Dibujo Asistido por Computadora
2D
4) DYNAMIC (DY)
Permite modificar la longitud de un objeto arrastrando el punto final, previamente seleccionado,
que se desea modificar (modo de arrastre dinmico).
Ejemplo: Extender la lnea que se muestra, una Longitud L = 75
Command: LEN
Select an object or [DElta/Percent/Total/DYnamic]: DY
Select an object to change or [Undo]: Clic en el lado que se alarga
Specify new end point: 75
Select an object to change or [Undo]:
MTODO PROCEDIMENTAL PRCTICO
Command: LEN
DY
(Dynamic)
Clic en el Objeto (estirar )
75
(Longitud que se alarga)
SESION - 06
12 / 12