0
Users Guide
English/Espaol
GMAA00365010
12/11
2
Safety icons
This manual contains safety instructions that must be observed to
avoid potential hazards that could result in personal injuries,
damage to your equipment, or loss of data. These safety cautions
have been classified according to the seriousness of the risk, and
icons highlight these instructions as follows:
Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
NOTE
3
Safety instructions
Always read the safety instructions carefully:
Always confirm that the power plug (and extension cable plug if used)
has been fully inserted into the socket, to ensure a secure electrical
connection. Failure to do so may result in a fire or electric shock,
possibly resulting in serious injury.
Be careful if you use a power strip. An overload on one socket could
cause a fire or electric shock, possibly resulting in serious injury.
If dust gets on the power plug connectors or connector base, turn the
power off and disconnect the power plug. Then clean the connector
and/or connector base with a dry cloth. Continuing to use the product
without cleaning the power plug may result in a fire or an electric shock,
possibly resulting in serious injury.
4
Only use TOSHIBA AC adaptor
Always use the TOSHIBA AC adaptor that may have been provided with
your product, or use AC adaptors specified by TOSHIBA to avoid any risk
of fire or other damage to the product. Use of an incompatible AC
adaptor could cause fire or damage to the product, possibly resulting in
serious injury. TOSHIBA assumes no liability for any damage caused by
use of an incompatible adaptor.
Never plug the AC adaptor into a power source that does not correspond
to both the voltage and the frequency specified on the regulatory label of
the unit. Failure to do so could result in a fire or electric shock, possibly
resulting in serious injury.
Always use or purchase power cables/cords that comply with the legal
voltage and frequency specifications and requirements in the country of
use. Failure to do so could result in a fire or electric shock, possibly
resulting in serious injury. Do not handle the power plug with wet hands.
Never attempt to connect or disconnect a power plug with wet hands.
Failure to follow this instruction could result in an electric shock,
possibly resulting in serious injury.
Choking hazards
Never leave small parts such as covers, caps and screws within the reach
of infants or small children. Swallowing a small part may cause choking
and suffocation resulting in death or serious injury. If a part is swallowed,
immediately take appropriate emergency action and consult a doctor.
Never allow any liquids to spill into any part of your product, and never
expose the product to rain, water, seawater or moisture. Exposure to
liquid or moisture can cause electric shock or fire, resulting in damage or
serious injury. If any of these eventualities should accidentally occur,
immediately disconnect the AC adaptor from the power plug socket and
from the product.
Do not connect the power again until you have taken the product
to an authorized service center. Failure to follow these
instructions could result in serious injury or permanent damage
to the product.
5
Never place your product in locations with excess heat
Never place your product where it will be exposed to excess heat, such
as in direct sunlight, in an unventilated vehicle or near a heater. This may
result in a system failure, malfunction, loss of data or damage to the
product.
FCC information
FCC notice "Declaration of Conformity Information"
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
6
FCC Conditions
This equipment has been tested and found to comply with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Contact
Address:
Telephone:
(949) 583-3000
Copyright statement
This guide is copyrighted by Toshiba Corporation with all rights reserved. Under
the copyright laws, this guide cannot be reproduced in any form without the prior
written permission of Toshiba. No patent liability is assumed, however, with
respect to the use of the information contained herein.
2011 by Toshiba Corporation. All rights reserved.
Disclaimer
Information in this document is subject to change without notice. The
manufacturer does not make any representations or warranties (implied or
otherwise) regarding the accuracy and completeness of this document and shall
in no event be liable for any loss of profit or any commercial damage, including
but not limited to special, incidental, consequential, or other damage.
October 2011, Rev1.0
7
Trademarks
dynadock is a trademark of Toshiba Corporation.
AMD, AMD K6, Athlon and Duron are registered trademarks or trademarks of
Advanced Micro Devices Incorporated.
DisplayLink is a trademark of DisplayLink Corporation.
Ethernet is a registered trademark and Fast Ethernet is a trademark of Xerox
Corporation.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing, LLC.
Intel, Intel Core, Pentium and Celeron are trademarks or registered trademarks of
Intel Corporation.
Microsoft, Windows, and Windows Vista are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
Other brands and product names are trademarks or registered trademarks of their
respective companies.
Contents
Safety icons ..............................................................2
Safety instructions ....................................................3
FCC information ........................................................5
Introduction................................................................................ 10
Overview .................................................................10
Features ............................................................10
Package contents....................................................11
Quick Tour ..............................................................12
Front view .........................................................12
Back view..........................................................14
Computer requirements ..........................................16
Contents
Chapter 3: Support..................................................................... 37
Toshiba Support .....................................................37
Before you call ..................................................37
Contacting Toshiba .................................................38
Toshibas Technical Support Web Site..............38
Toshiba voice contact .......................................38
Chapter 4: Specifications........................................................... 39
Specifications .........................................................39
Index............................................................................................ 41
Introduction
Thank you for purchasing the dynadock U3.0 universal docking
station that enables you to connect your computer peripherals
through a single USB cable to just about any Windows-based
computer.
We recommend that you keep your dynadock up-to-date by
visiting support.toshiba.com periodically to download updated
software drivers.
NOTE
Overview
Features
10
Introduction
11
Package contents
Check to make sure you have all of the following items:
dynadock U3.0
Base
12
Introduction
Quick Tour
This section identifies the various components of the
dynadock. For a description of each component, please
refer to the corresponding table that follows each illustration.
Front view
Power light
USB light
Headphone jack
Microphone jack
Introduction
13
Component
Description
Power light
USB light
Headphone jack
Microphone jack
NOTE
The power or USB Hub light is visible only when the AC adaptor or at
least one USB device is connected respectively.
14
Introduction
Back view
Introduction
15
Component
Description
Network port
DC-IN
16
Introduction
Computer requirements
Component
Description
CPU
Memory
USB interface
Disk space
Operating system
Chapter 1
NOTE
If the dynadock U3.0 Install Menu does not display, follow the
steps provided below for your operating system:
1) Double-click My Computer on your desktop or click Start, and
then Computer.
2) Double-click the DVD/CD drive icon, and then double-click
AutoRun.exe.
NOTE
Installation files with the latest drivers also available for download at
support.toshiba.com. Check periodically for updates.
17
18
NOTE
3
NOTE
19
NOTE
NOTE
20
Connect the square end of the provided USB cable into the
USB type B connector on the back of the dynadock.
NOTE
NOTE
21
NOTE
Plug one end of the HDMI cable (not included) into the
HDMI in port on the HDMI display.
22
Plug the other end of the HDMI cable (not included) into the
HDMI out port on the dynadock.
NOTE
NOTE
NOTE
Connecting to a network
Connect one end of a network cable (not provided) to the Network
port (RJ-45) on the dynadock and the other end to your network.
If the network is not automatically connected, configure the
network properties of the Ethernet adaptor as follows:
In Windows XP, click Start, Connect to, and then Show all
Connections.
23
Headphone jack
Microphone
jack
Audio Device:
Headphone/headset/
speakers
Microphone/headset
Activity:
Audio playback
Audio recording
24
Audio Device:
Home stereos/speakers
Activity:
Surround sound
function *
NOTE
If you make any changes to your audio settings, audio ports and the
dynadock, you may need to restart your media player for those
changes to take effect.
You do not need to turn off the dynadock or the docked computer
before connecting a USB device.
25
Use a USB cable to connect the device to one of the USB ports
on the dynadock.
NOTE
If you want to charge your USB device when the computer connected
to the dynadock is off or when there is no computer connected to
the dynadock, be sure to connect your device to the powered USB
port on the front of the dynadock.For more information, see
Charging USB devices using Toshiba USB Sleep and Charge
(page 34).
Chapter 2
26
Option
Check for updates
dynadock U3.0
Audio Setup
Video Setup
27
28
29
NOTE
NOTE
NOTE
You can also use the Windows Display settings to switch between
Extended mode and Mirror mode.
NOTE
30
Resolution
1280 x 960
1280 x 1024
1360 x 768
1366 x 768
1368 x 768
1400 x 1050
1440 x 900
1600 x 1200
1680 x 1050
1920 x 1080
2048 x 1152
NOTE
31
32
Click OK.
NOTE
If you make any changes to your audio settings, you may need to
restart your media player for the audio changes to take effect.
33
34
NOTE
Click OK.
NOTE
You may need to restart your media player for the audio changes to
take effect.
The "USB Sleep and Charge" function may not work with certain
external USB devices. Please contact the USB device manufacturer
or check the specifications of the external USB devices for further
details.
This function can only be used for the ports that support the "USB
Sleep and Charge" function (hereinafter called "compatible port").
NOTE
) symbol icon.
35
Connect the USB device you want to charge to the USB port on
the front of the dynadock.
NOTE
To stop charging the USB device, disconnect the device from the
dynadock.
36
Chapter 3
Support
Toshiba Support
If you require additional help or are still having problems operating
the dynadock, you may need to contact Toshiba for additional
technical assistance.
37
38
Support
Contacting Toshiba
Toshibas Technical Support Web Site
For technical support, or to stay current on the most recent software
and hardware options for your dynadock and for other product
information, be sure to regularly check the Toshiba Web site at
support.toshiba.com.
Appendix A
Specifications
Specifications
This section summarizes the dynadock U3.0 technical
specifications.*
Physical dimensions
Weight
Size
Environmental requirements
Conditions
Ambient temperature
Relative humidity
Operating
5 to 35 C (41 to 95 F)
20 to 80%
Non-operating
10 to 95%
Thermal Gradient
Power requirements
AC adaptor
100-240 volts AC
50-60 Hz (cycles per second)
dynadock
19V DC
2.37 amperes
39
40
General specifications
Computer Interface
Index
Numerics
3.5mm stereo lineout port 15
A
AC power
connection 20
adjusting
audio settings 31
video settings 28
assemble
dynadock 19
audio devices
connecting 23
audio ports
configuring 31
audio settings
adjusting 31
B
back view
Quick Tour 14
C
charging
USB devices 34
computer requirements 16
CPU 16
disk space 16
Memory 16
operating system 16
USB interface 16
configuring
audio ports 31
connect
AC power 20
DC-IN 20
dynadock to computer 20
connecting
audio devices 23
external displays to dynadock
21
peripherals 21
to a network 22
USB devices 24
connector
USB Type B connector 15
contacting Toshiba 38
D
DC-IN
connection 20
41
42
Index
DC-IN port 15
display modes
Extended/Mirror mode 28
DisplayLink Manager
Extend mode 29
DVI-I video port
connecting to 21
dynadock
assemble 19
environmental requirements 39
features 10
general specifications 40
physical dimensions 39
power requirements 39
setting up 17
supported display modes 29
dynadock U3.0 Install Menu 18
E
environmental requirements
dynadock 39
Extended/Mirror mode
display modes 28
external displays
connecting 21
F
FCC information 5
features
dynadock 10
front view
Quick Tour 12
G
general specifications
dynadock 40
H
HDMI out port 15
connecting to 21
Headphone jack 13
I
icon
safety 2
icons
safety 2
indicator light 13
install
software 17
instructions
safety 3
introduction 10
L
light
power 13
USB light 13
M
Microphone jack 13
N
network
connecting 22
Network port 15
P
package contents 11
peripherals
connecting 21
physical dimensions
dynadock 39
port
3.5mm stereo lineout 15
DC-IN 15
DVI-I video out port 15
HDMI out port 15
Headphone jack 13
Microphone jack 13
Network 15
security lock slot 15
USB 2.0 15
USB 3.0 15
USB 3.0 (USB Sleep and Charge
port) 13
USB Type B connector 15
power light 13
power requirements
Index
dynadock 39
Q
Quick Tour 12
back view 14
front view 12
S
safety
icons 2
instructions 3
security lock slot 15
setting up
the dynadock 17
settings
audio playback 31, 32
audio recording 33
software
install 17
specifications 39
standby/sleep/hibernation
using 35
supported display modes
dynadock 29
T
Toshiba
Web site 38
TOSHIBA dynadock U3.0 Utility
using 26
Toshiba support 37
U
USB 3.0 (USB Sleep and Charge port)
13
USB devices
charging 34
connecting 24
using
TOSHIBA dynadock U3.0
Utility 26
V
video settings
adjusting 28
W
Web site
Toshiba 38
43
2
conos de seguridad
Este manual contiene instrucciones de seguridad que deben
seguirse a fin de evitar posibles peligros que podran tener como
consecuencia lesiones personales, daos al equipo o prdida de
datos. Son advertencias de seguridad que estn clasificadas de
acuerdo con la gravedad del peligro y estn representadas por
conos que distinguen cada instruccin como se muestra a
continuacin:
Este cono indica la presencia de una situacin inminentemente
peligrosa que, de no evitarse, ocasionara muerte o lesiones graves.
NOTA
3
Instrucciones de seguridad
Siempre lea con cuidado las instrucciones de seguridad:
4
Use slo el adaptador de CA de TOSHIBA
Riesgo de asfixia
5
Nunca coloque el producto en sitios donde haya calor
excesivo
Requisitos de la FCC
Este equipo se prob y se comprob que cumple con la seccin 15 de las
normativas de la FCC. El funcionamiento est sujeto a las siguientes dos
condiciones:
(1) Este dispositivo no debe causar interferencias perjudiciales.
(2) Este dispositivo debe aceptar cualquier interferencia recibida, incluidas
aquellas que puedan comprometer su funcionamiento.
Contacto
Direccin:
Telfono:
Limitacin de responsabilidad
La informacin contenida en este documento est sujeta a cambios sin previo
aviso. El fabricante no hace ninguna declaracin ni asume ninguna
responsabilidad (implcita o de otro tipo) respecto a la exactitud e integridad de
este documento y no ser responsable de ninguna prdida de ganancias o
cualquier dao comercial, incluyendo entre otros los daos especiales,
incidentales, consecuenciales u otro tipo de dao.
Octubre de 2011, Rev1.0
7
Marcas registradas
dynadock es una marca registrada de Toshiba Corporation.
AMD, AMD K6, Athlon y Duron son marcas registradas o marcas comerciales
de Advanced Micro Devices Incorporated.
DisplayLink es una marca comercial de DisplayLink Corporation.
Ethernet es una marca registrada y Fast Ethernet es una marca comercial de
Xerox Corporation.
HDMI, el logotipo HDMI y High-Definition Multimedia Interface son marcas
registradas o marcas comerciales de HDMI Licensing, LLC.
Intel, Intel Core, Pentium y Celeron son marcas registradas o marcas comerciales
de Intel Corporation.
Microsoft, Windows y Windows Vista son marcas registradas o marcas
comerciales de Microsoft Corporation en Estados Unidos y/u otros pases.
Todos los dems nombres de marcas y productos son marcas comerciales o
marcas registradas de sus respectivas compaas.
Contenido
conos de seguridad ................................................2
Instrucciones de seguridad.......................................3
Informacin de la Comisin Federal de
Comunicaciones de Estados Unidos (FCC) .........5
Introduccin............................................................................... 10
Descripcin general ................................................10
Caractersticas ..................................................10
Contenido de la caja ...............................................11
Referencia rpida ....................................................12
Vista frontal ......................................................12
Parte posterior ..................................................14
Requisitos de la computadora ................................16
Contenido
Captulo 3: Asistencia................................................................. 37
Asistencia Toshiba .................................................37
Antes de contactar a Toshiba ............................37
Contacto con Toshiba .............................................38
Sitio web de asistencia tcnica de Toshiba .......38
Contacto telefnico con Toshiba .......................38
Captulo 4: Especificaciones...................................................... 39
Especificaciones .....................................................39
ndice........................................................................................... 41
Introduccin
Gracias por comprar la estacin de acoplamiento universal
dynadock U3.0 que le permite conectar perifricos a
prcticamente cualquier computadora basada en Windows,
utilizando un solo cable USB.
Le recomendamos que mantenga su dynadock actualizado con
los ltimos avances tecnolgicos: visite el sitio support.toshiba.com
con regularidad para descargar actualizaciones de controladores de
software.
NOTA
Descripcin general
Caractersticas
10
Introduction
11
Contenido de la caja
Compruebe que tenga todos los artculos que se enumeran a
continuacin:
dynadock U3.0
Base
12
Introduction
Referencia rpida
En esta seccin se identifican los distintos componentes del
dynadock. Para una descripcin de cada componente, consulte la
tabla correspondiente que sigue a cada ilustracin.
Vista frontal
Luz de encendido
Luz USB
Conector de audfonos
Conector de micrfono
Introduction
13
Componente
Descripcin
Luz de encendido
Luz USB
Conector de
audfonos
Conector de
micrfono
NOTA
14
Introduction
Parte posterior
Introduction
15
Componente
Descripcin
Puertos de salida
de audio de
5.1 Canales
Puerto de red
Puerto de salida
HDMI
Puerto de video de
salida DVI-I
DC-IN (corriente
continua)
Ranura para
candado de
seguridad
16
Introduction
Requisitos de la computadora
Componente
Descripcin
CPU
Memoria
Interfaz USB
Espacio de disco
Captulo 1
NOTA
NOTA
17
18
NOTA
NOTA
19
NOTA
NOTA
20
NOTA
NOTA
21
Conexin de perifricos
Una vez que haya conectado un cable USB entre la computadora y
el dynadock puede conectar dispositivos perifricos en los
puertos adecuados del dynadock.
NOTA
22
NOTA
NOTA
NOTA
23
Puertos de salida de
audio de 5.1 canales
Conector de
audfonos
Conector de
micrfono
24
Dispositivo de audio:
Auriculares/audfono/
altavoces
Micrfono/audfono
Equipos de sonido
estreo/altavoces
Actividad:
Reproduccin de
audio
Grabacin de
audio
Funcin de sonido
envolvente *
NOTA
25
NOTA
Captulo 2
26
27
28
Opcin
Utilice esta opcin para:
Acceso directo a las configuraciones de sonido de Windows.
Configuracin de
audio
Configuracin de video Acceso directo a las configuraciones de pantalla de Windows.
Si utiliza mltiples dynadocks con una sola computadora
(por ejemplo, uno en casa y otro en la oficina), cuando desconecte
la computadora se guardan las configuraciones de video de cada
dynadock. Esto le permite ajustar las configuraciones de video de
cada dynadock en forma diferente para cada ubicacin.
Estas configuraciones se conservan cada vez que utilice el
dynadock con la computadora.
29
NOTA
NOTA
NOTA
NOTA
30
Frecuencia de
actualizacin (Hz)
60, 72, 75, 85
70, 85, 88
56, 60, 72, 75, 85
75
60
60, 70, 75, 85
75
75
50, 60
60, 75, 85
60
Resolucin
1280 x 960
1280 x 1024
1360 x 768
1366 x 768
1368 x 768
1400 x 1050
1440 x 900
1600 x 1200
1680 x 1050
1920 x 1080
2048 x 1152
Frecuencia de
actualizacin (Hz)
60, 85
60, 75
60
50, 60
60
60, 75, 85
60
60
60
50, 60
60
NOTA
31
32
NOTA
33
34
NOTA
35
Esta funcin solo puede utilizarse para los puertos que admiten la
funcin de suspensin y carga USB (en lo sucesivo denominados
Puertos compatibles).
NOTA
).
NOTA
36
Captulo 3
Asistencia
Asistencia Toshiba
Si requiere ayuda adicional o todava tiene problemas con el
funcionamiento del dynadock, puede ser necesario contactar a
Toshiba para obtener asistencia tcnica adicional.
37
38
Asistencia
Apndice A
Especificaciones
Especificaciones
Esta seccin hace un resumen de las especificaciones tcnicas del
dynadock U3.0.*
Dimensiones fsicas
Peso
Tamao
(Anc. x Prof. x Alt.):
Requisitos ambientales
Condiciones
Temperatura ambiente
Humedad relativa
En funcionamiento
5 a 35 C (41 a 95 F)
20 a 80%
Apagado
10 a 95%
Gradiente trmica
26 C (78,8F) mxima
Temperatura de
termmetro de ampolla
hmeda
Requisitos elctricos
Adaptador de CA
dynadock
19V CC
2.37 amperios
39
40
Especificaciones generales
Interfaz de la
computadora
Puertos y conectores
ndice
A
Administrador DisplayLink
modo Extendido 29
ajuste
configuraciones de audio 31
configuraciones de video 28
alimentacin de CA
conexin 20
Asistencia Toshiba 37
C
caractersticas
dynadock 10
carga
dispositivos USB 34
conecte
alimentacin de CA 20
DC-IN 20
dynadock a la computadora 20
conector
conector USB Tipo B 15
Conector de audfonos 13
Conector de micrfono 13
conexin
a una red 22
dispositivos de audio 23
dispositivos USB 24
pantallas externas
al dynadock 21
perifricos 21
configuracin
puertos de audio 31
configuraciones
grabacin de audio 33
reproduccin de audio 31, 32
configuraciones de audio
ajuste 31
configuraciones de video
ajuste 28
contacto con Toshiba 38
Contenido de la caja 11
D
DC-IN
conexin 20
dimensiones fsicas
dynadock 39
41
42
ndice
dispositivos de audio
conexin 23
dispositivos USB
carga 34
conexin 24
dynadock
caractersticas 10
dimensiones fsicas 39
especificaciones generales 40
instalacin 17
modos de visualizacin
compatibles 29
montaje 19
requisitos ambientales 39
requisitos de alimentacin 39
luz de encendido 13
luz indicadora 13
pantallas externas
conexin 21
perifricos
conexin 21
puerto
Conector de audfonos 13
Conector de micrfono 13
conector USB Tipo B 15
DC-IN 15
puerto de salida HDMI 15
puerto de video de salida DVI-I
15
ranura para candado de seguridad
15
Red 15
salida estreo 3.5mm 15
USB 2.0 15
USB 3.0 15
USB 3.0 (puerto de suspensin y
carga USB) 13
puerto DC-IN 15
Puerto de red 15
puerto de salida HDMI 15
conexin a 22
puerto de video DVI-I
conexin a 21
especificaciones 39
especificaciones generales
dynadock 40
espera/suspensin/hibernacin
uso 35
I
cono
seguridad 2
conos
seguridad 2
Informacin de la Comisin Federal de
Comunicaciones de Estados
Unidos (FCC) 5
instalacin
el dynadock 17
software 17
instrucciones
seguridad 3
introduccin 10
L
luz
encendido 13
luz USB 13
M
Men de Instalacin dynadock U3.0
18
modo Extendido/Espejo
modos de pantalla 28
modos de pantalla
modo Extendido/Espejo 28
modos de visualizacin compatibles
dynadock 29
montaje
dynadock 19
ndice
R
ranura para candado de seguridad 15
red
conexin 22
Referencia rpida 12, 14
vista frontal 12, 14
requisitos ambientales
dynadock 39
requisitos de alimentacin
dynadock 39
requisitos de la computadora 16
CPU 16
espacio de disco 16
interfaz USB 16
Memoria 16
sistema operativo 16
S
seguridad
conos 2
instrucciones 3
sitio Web
Toshiba 38
software
instalacin 17
T
Toshiba
sitio Web 38
U
USB 3.0 (puerto de suspensin y carga
USB) 13
uso
utilidad TOSHIBA dynadock
U3.0 26
utilidad TOSHIBA dynadock U3.0
uso 26
V
vista frontal 12, 14
43