Anda di halaman 1dari 10

Page 1 of 10

CHEMICAL ENGINEERING

1st YEAR
All Programs
SEMESTER OFFERED

COURSE

PRE-REQUISITES are listed in this column.


CO-REQUISITES are noted as: "CO-REQ"

FALL
1

MATH 275

Calculus for Engineering and Scientists

formerly AMAT 217


2
3
4

ENGG 200
ENGG 233
MATH 211

Engineering Design and Communication

CHEM 209
ENGG 201

General Chemistry for Engineers

Computing for Engineers I


Linear Methods I

FALL or WINTER
5
6
7

Behaviour of Liquids, Gases and Solids


Complementary Study (1 half-course equivalent)
(See Note 1)

WINTER
8

MATH 277

Multivariable Calculus for Engineers

MATH 275 or AMAT 217

formerly AMAT 219

ENGG 202
ENGG 225

Engineering Statics

10
11

PHYS 259

Electricity and Magnetism

Fundamentals of Electrical Circuits and Machines


AMAT 217 and MATH 211;
recommended co-req: AMAT 219

Note 1: Taking a Complementary Study course in first year is optional, not required. All complementary studies courses must be
taken prior to graduation.

2nd YEAR
Chemical Engineering: Regular Program
SEMESTER OFFERED

COURSE

PRE-REQUISITES listed in this column.


CO-REQUISITES noted as: "CO-REQ"

Differential Equations for Engineers

AMAT 219 or MATH 253; MATH 211

FALL
1
2
3
4

AMAT 307
ENGG 311
ENGG 319
ENGG 349

Engineering Thermodynamics

ENGG 201; AMAT 217

Probability and Statistics for Engineers

AMAT 219

Dynamics

ENGG 202; AMAT 217; AMAT 219

FALL OR WINTER
5

Science Option (see Note 1)

6, 7

Complementary Study (2 half-course equivalents)

BLOCK WEEK - WINTER

ENCH 101

Computing Methods

ENGG 233

ENGG 317
ENCH 315
ENCH 331
CHEM 357

Mechanics of Solids

ENGG 202 or 205; AMAT 217

Chemical Engineering Process Calculations

Pre-req or co-req: ENGG 311 or ENEE 311

WINTER
8
9
10
11

Process Fluid Dynamics

ENGG 201; ENGG 202 or 205; AMAT 219 and 307

Industrial Organic Chemistry for Engineers

CHEM 209; or the combination of CHEM 201 and


203, or CHEM 211 and 213

Note 1: The courses that are acceptable for the Science option include: PHYS 369, GLGY 377, BIOL 241, 243, 305, 311 or 331,
CHEM 321, and AMAT 309. Other courses from the Faculty of Science may be substituted with approval of the Chemical and
Petroleum Engineering department and the relevant department in the Faculty of Science.

ENCH

Please also refer to the University of Calgary Calendar.


If any discrepancy is found between this document and the Calendar,
the Calendar will be deemed correct.

2014/15 Curriculum
(Updated June 13,

2014)

Page 2 of 10

CHEMICAL ENGINEERING

2nd YEAR (continued)


Chemical Engineering - Petroleum Engineering Minor
SEMESTER OFFERED

COURSE

PRE-REQUISITES listed in this column.


CO-REQUISITES noted as: "CO-REQ"

Differential Equations for Engineers

AMAT 219 or MATH 253; MATH 211

FALL
1
2
3
4
5

AMAT 307
ENGG 311
ENGG 319
ENGG 349
GLGY 377

Engineering Thermodynamics

ENGG 201; AMAT 217

Probability and Statistics for Engineers

AMAT 219

Dynamics

ENGG 202 or 205; AMAT 217 and 219

Petroleum Engineering Geology

FALL OR WINTER
6, 7

Complementary Study (2 half-course equivalents)

BLOCK WEEK-WINTER

ENCH 101

Computing Methods

ENGG 233

ENPE 313
ENGG 317
ENCH 315
ENCH 331
CHEM 357

Flow in Porous Media

Co-req: ENCH 331

WINTER
8
9
10
11
12

Mechanics of Solids

ENGG 202 or 205; AMAT 217

Chemical Engineering Process Calculations


Process Fluid Dynamics

Pre-req or co-req: ENGG 311 or ENEE 311


ENGG 201; ENGG 202 or 205; AMAT 219 and 307

Industrial Organic Chemistry for Engineers

CHEM 209; or the combination of CHEM 201 and


203, or CHEM 211 and 213

Chemical Engineering: Biomedical Specialization


SEMESTER OFFERED

COURSE

PRE-REQUISITES listed in this column.


CO-REQUISITES noted as: "CO-REQ"

FALL
Differential Equations for Engineers

AMAT 219 or MATH 253; MATH 211

Introduction to Biomedical Engineering

Admission into Biomed specialization

Engineering Thermodynamics

ENGG 201; AMAT 217

AMAT 307
BMEN 301
ENGG 311
ENGG 319

ENGG 349

Dynamics

1
2
3

Probability and Statistics for Engineers (See Note 1) AMAT 219


ENGG 202 or 205; AMAT 217 and 219

FALL or WINTER
6, 7

Complementary Study (2 half-course equivalents)

BLOCK WEEK - WINTER

ENCH 101

Computing Methods

ENGG 233

Mechanics of Solids

ENGG 202 or 205; AMAT 217

Chemical Engineering Process Calculations

Pre-req or co-req: ENGG 311 or ENEE 311

11

ENGG 317
ENCH 315
ENCH 331
CHEM 357

12

BMEN 309

Anatomy and Physiology for Engineers

WINTER
8
9
10

Process Fluid Dynamics

ENGG 201; ENGG 202 or 205; AMAT 219 and 307

Industrial Organic Chemistry for Engineers

CHEM 209; or the combination of CHEM 201 and


203, or CHEM 211 and 213
Admission into Biomed specialization

Note 1: Not open to students with credit in BMEN 319.

ENCH

Please also refer to the University of Calgary Calendar.


If any discrepancy is found between this document and the Calendar,
the Calendar will be deemed correct.

2014/15 Curriculum
(Updated June 13,

2014)

Page 3 of 10

CHEMICAL ENGINEERING

2nd YEAR (continued)


Chemical Engineering: Energy and Environment Specialization
SEMESTER OFFERED

COURSE

PRE-REQUISITES listed in this column.


CO-REQUISITES noted as: "CO-REQ"

FALL
1
2
3
4
5
6

AMAT 307
CHEM 321
ENGG 311
ENGG 319
ENGG 349
ENEE 355

Differential Equations for Engineers

AMAT 219 or MATH 253; MATH 211

Environmental Chemistry (formerly CHEM 421)

CHEM 209

Engineering Thermodynamics

ENGG 201; AMAT 217

Probability and Statistics for Engineers

AMAT 219

Dynamics

ENGG 202 or 205; AMAT 217; AMAT 219

Introduction to Energy and the Environment

Admission into the ENEE specialization

FALL or WINTER
7

Complementary Study (1 half-course equivalent)

BLOCK WEEK - WINTER

ENCH 101

Computing Methods

ENGG 233

CHEM 357

Industrial Organic Chemistry for Engineers

ENGG 317
ENCH 315
ENCH 331

Mechanics of Solids

CHEM 209; or the combination of CHEM 201 and


203, or CHEM 211 and 213
ENGG 202 or 205; AMAT 217

Chemical Engineering Process Calculations

Pre-req or co-req: ENGG 311 or ENEE 311

Process Fluid Dynamics

ENGG 201; ENGG 202 or 205; AMAT 219 and 307

WINTER

10
11

3rd YEAR
Chemical Engineering: Regular Program
SEMESTER OFFERED

COURSE

PRE-REQUISITES listed in this column.


CO-REQUISITES noted as: "CO-REQ"

Applied Chemistry and Chemical Pathways

CHEM 209 and 357

Numerical Methods in Engineering


Analyses in Chemical, Oil & Gas Engineering
Processes
Heat Transfer

ENGG 233; AMAT 307


ENCH 331; AMAT 307; co-req: ENCH 403

Chemical Engineering Thermodynamics

ENGG 311; ENCH 315

FALL
1
2
3
4
5

CHEM 409
ENGG 407
ENCH 401
ENCH 403
ENCH 427

ENCH 331; AMAT 307; co-req: ENCH 401

FALL or WINTER
6

Complementary Studies (1 half-course equivalent)

Technical Elective (1 half-course equivalent)

BLOCK WEEK - WINTER

ENCH 106

Dynamic Simulation Workshop


Separation Processes I

ENCH 403 and 427

Chemical Engineering Kinetics

ENCH 403, CHEM 357; co-req: ENCH 405

10

ENCH 405
ENCH 421
ENCH 423

11

ENCH 429

Chemical Engineering Process Development (See


Note 1)
Process Dynamics and Control

ENCH 315. Not open to students with credit in ENPE


423
ENCH 315, 331, and 401; co-req: ENCH 405. Not
open to students with credit in ENCH 529.

WINTER
8
9

ENCH

Please also refer to the University of Calgary Calendar.


If any discrepancy is found between this document and the Calendar,
the Calendar will be deemed correct.

2014/15 Curriculum
(Updated June 13,

2014)

Page 4 of 10

CHEMICAL ENGINEERING

3rd YEAR (continued)


Chemical Engineering: Petroleum Engineering Minor
SEMESTER OFFERED

COURSE

PRE-REQUISITES listed in this column.


CO-REQUISITES noted as: "CO-REQ"

Applied Chemistry and Chemical Pathways

CHEM 209 and 357

FALL
1
2
3
4
5
6

CHEM 409
ENGG 407
ENCH 401
ENCH 403
ENCH 427
ENPE 429

Numerical Methods in Engineering

ENGG 233; AMAT 307

Analyses in Chemical, Oil & Gas Engineering


Processes
Heat Transfer

ENCH 331; AMAT 307; co-req: ENCH 403


ENCH 331; AMAT 307; co-req: ENCH 401

Chemical Engineering Thermodynamics

ENGG 311 or ENEE 311; ENCH 315

Reservoir Engineering

ENGG 311; ENPE 313; GLGY 377

FALL or WINTER
7

Technical Elective (1 half-course equivalent)

Complementary Studies (1 half-course equivalent)

BLOCK WEEK - WINTER

ENCH 106

Dynamic Simulation Workshop


Separation Processes I
Chemical Engineering Kinetics

ENCH 403 and 427


ENCH 403; CHEM 357; co-req: ENCH 405

11

ENCH 405
ENCH 421
ENCH 423

Chemical Engineering Process Development

12

ENCH 429

Process Dynamics and Control

ENCH 315. Not open to students with credit in ENPE


423
ENCH 315, 331, and 401; co-req: ENCH 405. Not
open to students with credit in ENCH 529.

WINTER
9
10

Chemical Engineering: Biomedical Specialization


SEMESTER OFFERED

COURSE

PRE-REQUISITES listed in this column.


CO-REQUISITES noted as: "CO-REQ"

Applied Chemistry and Chemical Pathways

CHEM 209 and 357

FALL
1
2
3
4
5

CHEM 409
ENGG 407
ENCH 401
ENCH 403
ENCH 427

Numerical Methods in Engineering

ENGG 233; AMAT 307

Analyses in Chemical, Oil & Gas Engineering


Processes
Heat Transfer

ENCH 331; AMAT 307; co-req: ENCH 403

Chemical Engineering Thermodynamics

ENGG 311 or ENEE 311; ENCH 315

ENCH 331; AMAT 307; co-req: ENCH 401

FALL or WINTER
6,7

Complementary Studies (2 half-course equivalents)

BLOCK WEEK - WINTER

ENCH 106

Dynamic Simulation Workshop


Fundamentals of Biomedical Device Design

11

BMEN 401
ENCH 405
ENCH 421
ENCH 423

12

ENCH 429

Process Dynamics and Control

WINTER
8
9
10

ENCH

BMEN 301

Separation Processes I

ENCH 403 and 427

Chemical Engineering Kinetics

ENCH 403; CHEM 357; co-req: ENCH 405

Chemical Engineering Process Development

ENCH 315. Not open to students with credit in ENPE


423
ENCH 315, 331, and 401; co-req: ENCH 405. Not
open to students with credit in ENCH 529.

Please also refer to the University of Calgary Calendar.


If any discrepancy is found between this document and the Calendar,
the Calendar will be deemed correct.

2014/15 Curriculum
(Updated June 13,

2014)

Page 5 of 10

CHEMICAL ENGINEERING

3rd YEAR (continued)


Chemical Engineering: Energy and Environment Specialization
SEMESTER OFFERED

COURSE

PRE-REQUISITES listed in this column.


CO-REQUISITES noted as: "CO-REQ"

Applied Chemistry and Chemical Pathways


Numerical Methods in Engineering
Analyses in Chemical, Oil & Gas Engineering
Processes
Heat Transfer
Chemical Engineering Thermodynamics
Canadian Energy Mgmt and Regulations

CHEM 209 and 357


ENGG 233; AMAT 307
ENCH 331; AMAT 307; co-req: ENCH 403

FALL
1
2
3

CHEM 409
ENGG 407
ENCH 401

4
5
6

ENCH 403
ENCH 427
ENMG 301

ENCH 331; AMAT 307; co-req: ENCH 401


ENGG 311 or ENEE 311; ENCH 315
Admission to ENEE specialization

FALL or WINTER
7

Complementary Study (1 half-course equivalent)

BLOCK WEEK - WINTER

ENCH 106

Dynamic Simulation Workshop


Separation Processes I

ENCH 403 and 427

Chemical Engineering Kinetics

ENCH 403; CHEM 357; co-req: ENCH 405

10

ENCH 405
ENCH 421
ENCH 423

Chemical Engineering Process Development

11

ENCH 429

Process Dynamics and Control

ENCH 315. Not open to students with credit in ENPE


423
ENCH 315, 331, and 401; co-req: ENCH 405. Not
open to students with credit in ENCH 529.

WINTER
8
9

12

ENEE Technical Electives (1 half-course equivalent)

4th YEAR
Chemical Engineering: Regular Program
SEMESTER OFFERED

COURSE

PRE-REQUISITES listed in this column.


CO-REQUISITES noted as: "CO-REQ"

Transport Phenomena

ENCH 401

Separation Processes II

ENCH 405

ENCH 501
ENCH 505
ENCH 511
ENCH 551

ENGG 513

The Role and Responsibilities of the Professional


Engineer in Society
Technical Electives (2 half-course equivalents)

FALL
1
2
3

Chemical Process Design I

ENCH 405, 421, and 423; and ENCH 429 or 529

Chemical Engineering Laboratory

ENCH 405; co-req: ENCH 505 or BMEN 500 or


BMEN 501. Not open to students with credit in ENPE
551

FALL or WINTER

6, 7
8

Complimentary Study (1 half-course equivalent)

BLOCK WEEK - WINTER

ENCH 106

Dynamic Simulation Workshop


(if ENCH 106 was not completed in 3rd year, this
must be completed by end of 4th year)

CHEM 579
ENCH 531

Surface and Colloid Chemistry for Engineers

CHEM 209 and 357; ENCH 427

Chemical Process Design II

ENCH 511

WINTER
9
10

ENCH

Please also refer to the University of Calgary Calendar.


If any discrepancy is found between this document and the Calendar,
the Calendar will be deemed correct.

2014/15 Curriculum
(Updated June 13,

2014)

Page 6 of 10

CHEMICAL ENGINEERING

4th YEAR (continued)


Chemical Engineering: Petroleum Engineering Minor
SEMESTER OFFERED

COURSE

PRE-REQUISITES listed in this column.


CO-REQUISITES noted as: "CO-REQ"

Transport Phenomena

ENCH 401

ENCH 501
ENCH 505
ENPE 511

4
5

FALL
1
2

Separation Processes II

ENCH 405

Design for Oil & Gas Engineering I

ENCH 315 and 405; ENCH or ENPE 423; ENPE 429


or 523

ENPE 551

Petroleum Engineering Laboratory

ENCH 405; ENPE 313 or 513; ENPE 429 or 523

ENGG 513

The Role and Responsibilities of the Professional


Engineer in Society
Technical Electives (2 half-course equivalents)

Final year standing in SSE

FALL or WINTER

6,7
8

Complimentary Study (1 half-course equiv)

BLOCK WEEK - WINTER

ENCH 106

Dynamic Simulation Workshop (if not completed by


end of 3rd year, this must be completed by end of
4th year)

CHEM 579
ENPE 531

Surface and Colloid Chemistry for Engineers

CHEM 209 and 357; ENCH 427

Design for Oil & Gas Engineering II

ENPE 511

WINTER
9
10

Chemical Engineering: Biomedical Specialization - Thesis Option


SEMESTER OFFERED

COURSE

PRE-REQUISITES listed in this column.


CO-REQUISITES noted as: "CO-REQ"

Transport Phenomena
Separation Processes II

ENCH 401
ENCH 405

ENCH 501
ENCH 505
ENCH 511

Chemical Process Design I (See Note 1)

ENCH 405, 421, 423, and 429 or 529

4-6

BMEN 500

Biomedical Engineering Research Thesis (3 halfcourse equivalents)

4th or 5th year standing; pre-term study is required

ENGG 513

The Role and Responsibilities of the Professional


Final year standing in SSE
Engineer in Society
Biomedical Engineering Technical Electives (2 halfcourse equivalents)

FALL
1
2
FALL and WINTER

FALL or WINTER

8,9
BLOCK WEEK - WINTER

ENCH 106

Dynamic Simulation Workshop (if not completed by


end of 3rd year, this must be completed by end of
4th year)

ENCH 531

Chemical Process Design II

WINTER
10

ENCH

ENCH 511

Please also refer to the University of Calgary Calendar.


If any discrepancy is found between this document and the Calendar,
the Calendar will be deemed correct.

2014/15 Curriculum
(Updated June 13,

2014)

Page 7 of 10

CHEMICAL ENGINEERING

4th YEAR (continued)


Chemical Engineering: Biomedical Specialization - Project Option
SEMESTER OFFERED

COURSE

PRE-REQUISITES listed in this column.


CO-REQUISITES noted as: "CO-REQ"

Transport Phenomena

ENCH 401

Separation Processes II

ENCH 405

ENCH 501
ENCH 505
ENCH 511

Chemical Process Design I

ENCH 405, 421, 423, and 429 or 529

BMEN 501

BMEN Project (1 half-course equivalent)

4th or 5th year standing; pre-term study is required

ENGG 513

The Role and Responsibilities of the Professional


Final year standing in SSE
Engineer in Society
Biomedical Engineering Technical Electives (2 halfcourse equivalents)
Biomedical Engineering Technical Electives or
Chemical Engineering Technical Electives or CHEM
579 or ENCH 551 (2 half-course equivalents)

FALL
1
2
FALL or WINTER

6,7
8,9

BLOCK WEEK - WINTER

ENCH 106

Dynamic Simulation Workshop (if not completed by


end of 3rd year, this must be completed by end of
4th year)

ENCH 531

Chemical Process Design II

WINTER
10

ENCH 511

Chemical Engineering: Energy and Environment Specialization


SEMESTER OFFERED

COURSE

PRE-REQUISITES listed in this column.


CO-REQUISITES noted as: "CO-REQ"

Transport Phenomena

ENCH 401

Separation Processes II

ENCH 405

ENCH 501
ENCH 505
ENCH 511
ENCH 551

SCIE 529

Project Course on Sustainable Energy, Environment Admission into the ENEE specialization
and Economy

ENGG 513

The Role and Responsibilities of the Professional


Engineer in Society
Complementary Studies (1 half-course equivalent)

FALL
1
2
3

Chemical Process Design I

ENCH 405, 421, 423, and 429 or 529

Chemical Engineering Laboratory

ENCH 405; co-req: ENCH 505 or BMEN 500 or


BMEN 501. Not open to students with credit in ENPE
551

FALL or WINTER

7
8, 9

ENEE Technical Elective (2 half-course equivalents)

BLOCK WEEK - WINTER

ENCH 106

Dynamic Simulation Workshop (if not completed by


end of 3rd year, this must be completed by end of
4th year)

CHEM 579
ENCH 531

Surface and Colloid Chemistry for Engineers

CHEM 209 and 357; ENCH 427

Chemical Process Design II

ENCH 511

WINTER
10
11

ENCH

Please also refer to the University of Calgary Calendar.


If any discrepancy is found between this document and the Calendar,
the Calendar will be deemed correct.

2014/15 Curriculum
(Updated June 13,

2014)

Page 8 of 10

CHEMICAL ENGINEERING

2014/2015
Chemical Engineering Technical Electives List
Chemical Engineering Approved Technical Electives
Regular Program, and Petroleum Minor - Select 3* half-course equivalents.
At least 2 tech electives chosen must be "CORE" tech electives.
Note: All technical electives may not be offered each year.
SEMESTER
OFFERED

CORE/
NONCORE

COURSE

PRE-REQUISITES listed in this column.


CO-REQUISITES noted as: "CO-REQ"

Biomaterials and Biocompatibility

4th or 5th year standing in SSE

FALL
CORE
CORE

BMEN 511
BMEN 515

CORE

ENEE 501

Bioengineering Methods in Systems Biology and


AMAT 307
Physiology
Pollution Prevention and Control for Energy Industry 3rd, 4th or 5th year standing in SSE

CORE

ENEE 505

Effluent Treatment Processes for Energy Industry

NON-CORE

ENCH 503

Upgrading and Refining Processes

NON-CORE

ENCH 519.10

Spec Topic: Fuel Properties and Utilization

Consent of dept.

NON-CORE

ENCH 519.12

Spec Topic: Intro to Instrumentation Charac

Consent of dept.

CORE

ENPE 507

ENPE 429 or 523 or consent of dept.

CORE

ENPE 509

Well Logging and Formation Evaluation (Fall


section restricted to Oil+Gas students)
Well Testing

ENCH 331 or ENME 341; and 3rd, 4th or 5th year


standing SSE
CHEM 409 and ENCH 421; or consent of the dept.

ENPE 429 or 523 or consent of dept.

CORE

ENPE 515

ENGG 311 and 317; ENCH 331; co-req: ENPE 429


Drilling and Well Completion (Fall section
restricted to students in ENCH, with and without or 523.
the Petroleum Minor)

CORE

ENPE 523

Introduction to Reservoir Engineering (Fall section ENGG 311 or ENEE 311; ENCH 331 or ENME 341;
open to all students with proper prerequisites and/or or consent of department; not open to students with
credit in ENPE 429.
dept consent)

CORE

ENPE 543

Geological Characterization of Oil & Gas Reservoirs ENPE 523 or 429, or consent of dept.
Co-req: ENPE 507

NON-CORE

ENPE 561
ENPE 571

Fuel Science and Technology


Unconventional Oil Exploration

ENPE 429 or 523 or consent of the dept

ENCH 519.13
ENCH 535

Spec Topic: Electrochemical Engineering

Consent of the department; see dept for details

Principles of Biochemical Engineering

CHEM 357

ENEE 503
ENPE 507

Life Cycle Assessment

3rd, 4th or 5th year standing in SSE

Well Logging and Formation Evaluation (Winter


section restricted to ENOG students ONLY)

ENPE 429 or 523 or consent of dept.

ENPE 513
ENPE 515

Flow in Porous Media

Not open to students with credit in ENPE 313

CORE
CORE

ENPE 523

Drilling and Well Completion (Winter section


restricted to ENOG students ONLY)
Introduction to Reservoir Engineering (Winter
section restricted to ENCH students)

ENGG 311 and 317; ENCH 331; co-req: ENPE 429


or 523.
ENGG 311 or ENEE 311; ENCH 331 or ENME 341;
or consent of department; not open to students with
credit in ENPE 429.

CORE

ENPE 525
ENPE 533
ENPE 563
ENPE 573

NON-CORE
WINTER
NON-CORE
CORE
CORE
CORE
CORE

CORE
NON-CORE
NON-CORE

Waterflooding and Enhanced Oil Recovery

ENPE 523 or 429 or consent of the dept.

Petroleum Production Engineering

ENPE 523 or 429 or consent of the dept.

Materials Aspects of Oil & Gas Production


Unconventional Gas Exploration

ENPE 523 or 429 or consent of the dept.

NOT OFFERED 2014/2015


CORE

ENCH 541

Introduction to Cell and Tissue Engineering

CORE

ENCH 537
ENCH 539

Computational Thermodynamics

CHEM 357 or consent of department. Not open to


students with credit in BMEN 407.
ENCH 427 or consent of dept.

Polymer Engineering

ENCH 403; pre- or co-req: CHEM 357

CORE

ENCH

Please also refer to the University of Calgary Calendar.


If any discrepancy is found between this document and the Calendar,
the Calendar will be deemed correct.

2014/15 Curriculum
(Updated June 13,

2014)

Page 9 of 10

CHEMICAL ENGINEERING

2014/2015
BMES Technical Electives List
Biomedical Specialization Approved Technical Electives
SEMESTER
OFFERED
FALL

COURSE

BMEN 511
BMEN 515
BMEN 519
ENCH 535
ENCM 509

PRE-REQUISITES listed in this column.


CO-REQUISITES noted as: "CO-REQ"

Biomaterials and Biocompatibility

4th or 5th year standing in SSE

Bioengineering Methods in Systems Biology and


Physiology
Special topics in Biomedical Engineering

AMAT 307

Principles of Biochemical Engineering

CHEM 357

Fundamentals of Biometric Systems Design

ENEL 327 or consent of instructor; not open to


students with credit in ENEL 519.36

Consent of the BMES director

WINTER

BMEN 509

Introduction to Biomedical Imaging and Applications 4th or 5th year standing in SSE

BMEN 525

Biomechanics of Tissues

ENEL 563

Biomedical Signal Analysis

ENGG 317 and 349. Not open to students with credit


in BMEN 405
ENEL 327

NOT OFFERED 2014/2015

ENCH

BMEN 513

Photogrammatic Techniques for Reconstruction and 4th or 5th year standing in SSE
Manipulation of Biomedical Data

ENME 523

Biomechanics of Joints

4th year standing or consent of the Mechanical


engineering dept.

Please also refer to the University of Calgary Calendar.


If any discrepancy is found between this document and the Calendar,
the Calendar will be deemed correct.

2014/15 Curriculum
(Updated June 13,

2014)

Page 10 of 10

CHEMICAL ENGINEERING

2014/2015
ENEE Technical Electives List
Energy and Environment Specialization Approved Technical Electives
SEMESTER
OFFERED
FALL

COURSE

PRE-REQUISITES listed in this column.


CO-REQUISITES noted as: "CO-REQ"

ENEE 501

Pollution Prevention & Control for Energy Industry

3rd, 4th or 5th year standing in SSE

ENEE 505

Effluent Treatment Processes for Energy Industry

ENCI 581
ENEL 562

Environmental Engineering II

ENCH 331 or ENME 341; and 3rd, 4th or 5th year


standing SSE
ENCI 481 and ENME 341

ENPE 523

Introduction to Reservoir Engineering (Fall section


open to all students with the acceptable
prerequisites or dept consent)

ENPE 561

Fuel Science and Technology

ENCI 502
ENCI 508
ENEE 503
ENEE 575

Aspects of Sustainable Communities

ENCI 473 and 481

Environment Aspects of Energy

ENCI 481

ENEE 577
ENEL 585
ENEL 587
ENGO 551
ENGO 583
ENPE 523

Electrical Transmission Sys Planning & Oper

Photovoltaic System Engineering

ENEL 361. Not open to students with credit in ENEL


519.07
ENGG 311 or ENEE 311; ENCH 331 or ENME 341;
or consent of the Dept.

WINTER

Life Cycle Assessment

3rd, 4th or 5th year standing in SSE

Alternative Energy Systems

ENEE 311 or ENGG 311; and 4th or 5th year


standing in SSE
3rd, 4th or 5th year standing in SSE

Introduction to Power Electronics

ENEL 465 or 469

Power Systems

ENEL 487 or 489

Advanced Geospatial topics

4th year standing in SSE

Environmental Modelling

4th year standing in SSE

Introduction to Reservoir Engineering (Winter


section is restricted to students within the
Chemical engg major, with or without minor or
specialization)

ENGG 311 or ENEE 311; ENCH 331 or ENME 341;


or consent of the Dept.

ENPE 533

Petroleum Production Engineering

ENPE 523 or 429 or consent of the Dept.

ENME 519.01

Inno. and Entre. Renewable Energy - Study Abroad


Program
Renewable Energy Practicum - Study Abroad
Program

Consent of the dept

SPRING/SUMMER

ENME 519.21

Consent of the dept

NOT OFFERED 2014/2015

ENCH

ENCI 506
ENEE 519
ENEE 573

Sustainable Infrastructure

ENCI 402 or 413; ENCI 451; ENCI 461

Special topics in Energy and Environment

Consent of the CEERE Director or designate

Engineering Aspects of Sustainable Communities

3rd, 4th or 5th year standing in SSE

ENEL 581
ENEL 597
ENME 583
ENME 593
ENPE 555

Solid State Lighting and Human Development

ENEL 489 or permission of the instructor.

Power Systems Operations and Markets

ENEL 487, 489 or 587

Mechanical Systems in Buildings

ENME 471 and 485

Energy Systems

ENME 471 and 485

Oil and Gas Field Safety and Environment

Please also refer to the University of Calgary Calendar.


If any discrepancy is found between this document and the Calendar,
the Calendar will be deemed correct.

2014/15 Curriculum
(Updated June 13,

2014)

Anda mungkin juga menyukai