Precision
BearingLubrication
Barden Ultra Filtered Greases are engineered for use in precision bearings and can help
you achieve optimal performance ttom your precision bearings. Five grades of petroleum
and ester-based greases are available in 30cc precision-calibrated dispensers. To order,
contact your Authorized Barden Distributor, or call Barden for details.
Each kit includes:
30cc of grease in calibrated cartridge
Screw-on applicator tip
..
.
Replaceable
storage caps
G-75
Arcanol
L-75
G-46
Kluber
IsoflexNBU-15
G-42
NYE
Rheolube 350-SBG-2
G-29
Exxon
Andok260
G-12
Chevron
SRI-2
..Plunger
. Fill quantity
Calibration
Marks~
30cc Grease
Cartridge
----.
Base Oil: Ester; Thickener: Barium Complex; Opr. Temp Range: -40F to
+250F; Max dN*: 750,000; Type: Non-Channeling; Additives: Oxidation,
Corrosion, E.P.; Oil VISCosity:@1O0F:23cSt; @21OF:4.7cSt; N.L.G.L:
Grade #2
Comments: Spindle bearing grease for maximum speeds, moderate
loads at normal shop temperatures. Good resistance to water washout
and corrosion.
Base Oil: Petroleum; Thickener: Sodium/Calcium; Opr. Temp Range:
-30F to +250F; Max dN*: 650,000; Type: Channeling; Additives:
Oxidation, Corrosion; Oil Viscosity: @1O0F: 65cSt; @21OF: 7cSt;
N.L.G.I.: Grade #2
Comments: Spindle bearing grease for normal shop temperatures
and maximum life at high speeds and loads. Provides good protection
against &etting corrosion. Water resistant.
Plunger ----.
Base Oil: Petroleum; Thickener: Poly Urea; Opr. Temp Range: -20F
to +300F; Max dN*: 400,000; Type: Non-Channeling; Additives:
Oxidation, Corrosion (Super rust inhibited); Oil Viscosity: @1O0F:
129cSt; @21OF:12.2cSt; N.L.G.L: Grade #2
Comments: A general purpose, moderate speed, water resistant grease.
*dN
= Bearing bore
()
Series 1900
Series 2900
Series 100
Series 2100
. . . . . . . . . . .25 cc . . . . . .
......................
. . . . . . . . . . .25 cc . . . . . .
. . . . . . . . . . .25 cc . . . . . .
. . . . . . . . . . .50 cc . . . . . .
. . . . . . . . . . .50 cc . . . . . .
. . . . . . . . . . .50 cc . . . . . .
. . . . . . . . . . 1.00 cc . . . . . .
. . . . . . . . . . 1.50 cc . . . . . .
......................
. . . . . . . . . . 1.50 cc . . . . . .
. . . . . . . . . . 2.50 cc . . . . . .
......................
. . . . . . . . . . 3.00 cc . . . . . .
......................
......................
......................
......................
. . . . . . . . . . 8.00 cc . . . . . .
......................
......................
......................
......................
......................
......................
......................
......................
Series 200
Series 2200
Series 300
Series 2300
.25 cc . . . . . . . .50 cc . . . . . . . . . . . . .
.25 cc . . . . . . . .50 cc . . . . . . . . . . . . .
.50 cc . . . . . . . 1.00 cc . . . . . 1.00 cc
.50 cc . . . . . . . 1.00 cc . . . . . 1.50 cc
1.00 cc . . . . . . . 1.50 cc . . . . . 2.00 cc
1.00 cc . . . . . . . 2.00 cc . . . . . 3.00 cc
1.50 cc . . . . . . . 3.50 cc . . . . . 3.50 cc
2.00 cc . . . . . . . 3.50 cc . . . . . 7.00 cc
2.50 cc . . . . . . . 5.00 cc . . . . . 10.00 cc
3.50 cc . . . . . . . 6.00 cc . . . . . 12.00 cc
3.50 cc . . . . . . . 7.00 cc . . . . . 16.00 cc
5.50 cc . . . . . . . 9.00 cc . . . . . 16.00 cc
6.00 cc . . . . . . . 11.00 cc . . . . . 23.00 cc
7.00 cc . . . . . . . 11.00 cc . . . . . 28.00 cc
9.00 cc . . . . . . . 14.00 cc . . . . . . . . . . . . .
9.00 cc . . . . . . . 14.00 cc . . . . . 41.00 cc*
11.00 cc . . . . . . . 18.00 cc . . . . . . . . . . . . .
12.00 cc . . . . . . . 24.00 cc . . . . . 54.00 cc*
16.00 cc . . . . . . . 52.00 cc* . . . . 60.00 cc*
16.00 cc . . . . . . . . . . . . . . . . . . . 77.00 cc*
17.00 cc . . . . . . 37.00 cc* . . . . . . . . . . . .
21.00 cc . . . . . . . . . . . . . . . . . . . . . . . . . . .
25.00 cc . . . . . . . . . . . . . . . . . . . 110.00 cc*
27.00 cc . . . . . . . . . . . . . . . . . . . . . . . . . . .
46.00 cc* . . . . . . . . . . . . . . . . . . . . . . . . . .
47.00 cc* . . . . . . . . . . . . . . . . . . . . . . . . . .
53.00 cc* . . . . . . . . . . . . . . . . . . . . . . . . . .
Consult Barden Product Engineering for assistance with specific lubrication applications.
THE BARDEN CORPORATION
P.O. Box 2449
200 Park Avenue, Danbury, CT 06813-2449
(800) 243-1060 FAX: (203) 744-3756
12/97
INSTRUCTIONS
Syringe Assembly
Greasing Methods
Verify bearing series and size number.
Select appropriate grease quantity from chart (refer to bearing series and size number).
Inject grease into bearing from direction noted by arrow below.*
Grease is to be evenly and symmetrically distributed circumferentially within bearings.
Bearings are to be rotated 1/2 turn minimum after application of grease.
Grease must generally coat the balls and internal surfaces of the bearing.
*Note: on B type
bearings, carefully
remove inner ring and
apply grease to balls as
indicated by arrow.