Page 1 of 16
I think there is no home without at least few beautiful plants enriching a living space. They look
especially beautiful if put together on one place. If you provide them good care, they will grow and
blossom, but also take more and more of your space each year. And this wooden Corner Plant Holder
is just a perfect solution. You can put several flower pots on it even the biggest ones put it in the
corner and simple enjoy it.
Carefully make the items by following the measurements given on particular pictures.
The measurements are given in millimeters, while the measurements given in inches are in brakes (1
inch = 25, 4 mm). You can use various types of wood, but we recommend birch, cedar, beech, maple
or alder.
Parts list
Page 2 of 16
Assembly drawing
Page 3 of 16
Page 4 of 16
Page 5 of 16
Page 6 of 16
Page 7 of 16
Page 8 of 16
Page 9 of 16
Page 10 of 16
Standard Parts
Page 11 of 16
Page 12 of 16
Assemblage Instructions:
1. Screw the Dowel Screws D5x70mm (part 8) into the holes made on the Legs (part 5). This way made
subassemblies pull throuhg the holes on the Board 4 (part 1). Screw two Covers (part 6) on the Dowel
Screws D5x70mm (part 8), just like on the picture.
Page 13 of 16
2. Pull Woodscrews D5x45mm (part 9) through the remaining two holes on the Board 4 (part 1) and
screw the Columns (part 7) on it. Don not forget to put the Washers D5 mm (part 10) under the
woodscrew caps.
3. Screw the Dowel Screws D5x70mm (part 8) on the top of Columns (part 7).
4. Put the Board 3 (part 2) on his place and screw the Covers (part 6) on thier places.
Page 14 of 16
Page 15 of 16
5. Pull Wood screws D5x45mm (part 9) through the remaining two holes on the Board 3 (part 2) and
screw Columns (part 7) on it. Do not forget to put the Washers D5 mm (part 10) under the woodscrew
caps.
Page 16 of 16