Civil Engineering
General Information
Ottawa-Carleton Joint Program
Established in 1984, the Ottawa-Carleton Institute of Civil Engineering (OCICE) combines the research strengths and resources of the
Departments of Civil and Environmental Engineering at Carleton University with that of the Department of Civil Engineering at the
University of Ottawa.
The Institute offers graduate programs leading to the degrees of Master of Applied Science (MASc), Master of Engineering (MEng) and
Doctor of Philosophy (PhD) in Civil Engineering.
Research facilities are shared between the two campuses. Students have access to the professors, courses and facilities at both universities;
however,theymustregisteratthehomeuniversityofthethesissupervisor.
Members of the Institute are engaged in six main research fields: environmental engineering; fire safety engineering; geotechnical
engineering; structural engineering; transportation engineering; and, water resources engineering. Additional information is posted in the
departmental website.
Most of the courses in the graduate programs are offered in English. Research activities can be conducted either in English, French or
both, depending on the language used by the professor and the members of his or her research group.
In accordance with the University of Ottawa regulation, students have a right to produce their work, their thesis, and to answer
examination questions in French or in English.
The program is governed by the regulations and procedures for Joint Graduate Programs and the general regulations of the graduate
faculty at each of the two universities.
The general regulations of the Faculty of Graduate and Postdoctoral Studies (FGPS) of the
University of Ottawa are posted on the FGPS website.
Admission
Admission to the graduate programs in Civil Engineering is governed by the general regulations of the Faculty of Graduate and
Postdoctoral Studies (FGPS).
To be considered for admission, applicants must:
Holdamastersdegreewiththesisincivilengineering,orinthesubdisciplinesnormallyconsideredtobepartofcivilengineering.
Demonstrate strong research performance.
Provideatleasttwoconfidentiallettersofrecommendationfromprofessorswhoarefamiliarwiththeapplicantswork.
Provide a statement of purpose indicating the career goals and the interests in the proposed research area.
Identify at least one professor who is willing and available to act as thesis supervisor.
Be proficient (understand, speak and write) in English. Most of the courses in these programs are offered in English. Research
activities can be conducted either in English, French or both, depending on the language used by the professor and the members of
his or her research group.
TransferfrommasterstoPhD
Studentsinamastersprogramwhohaveachievedan80%(A)averageintheirlasttwoyearsofundergraduatestudiesmaybeallowed
totransfertothePhDprogramwithoutbeingrequiredtowriteamastersthesisprovidedtheymeetthefollowingconditions:
Completion of 5 graduate courses (15 credits) with a grade of A- or better in each.
Satisfactory progress in the research program.
Written recommendation from the supervisor and the thesis advisory committee.
Approval by the graduate studies committee.
Thetransfermusttakeplacewithinsixteenmonthsofinitialregistrationinthemasters.Pleasenotethattheminimaladmissionaverage
requirements for the doctoral program must also be met. Following transfer, all the requirements of the doctoral program must be met.
Program Requirements
The PhD degree requires successful completion of the following:
1 / 12
TransferfrommasterstoPhD
Studentsinamastersprogramwhohaveachievedan80%(A)averageintheirlasttwoyearsofundergraduatestudiesmaybeallowed
totransfertothePhDprogramwithoutbeingrequiredtowriteamastersthesisprovidedtheymeetthefollowingconditions:
Completion of 5 graduate courses (15 credits) with a grade of A- or better in each.
Satisfactory progress in the research program.
Written recommendation from the supervisor and the thesis advisory committee.
Approval by the graduate studies committee.
Civil Engineering
Thetransfermusttakeplacewithinsixteenmonthsofinitialregistrationinthemasters.Pleasenotethattheminimaladmissionaverage
requirements for the doctoral program must also be met. Following transfer, all the requirements of the doctoral program must be met.
Program Requirements
The PhD degree requires successful completion of the following:
12 course credits.
In the case of transfer from the MASc to the PhD, students must complete 27 credits master's (15cr.) and PhD (12cr.) combined.
CVG8366 Doctoral Seminar in Civil Engineering.
CVG9998 Comprehensive Examination.
CVG9999 Presentation and defense of a thesis based on original research carried out under the direct supervision of a research
faculty member in the Department.
Residence
All students must succesfully complete a minimum of six sessions of full-time registration. In the case of transfer students, the residency
period is nine full-time sessions from the time of the initial registration in the program.
Minimum Standards
The passing grade in all courses is B. Students who fail 6 credits, the thesis proposal, the comprehensive exam, the thesis, or whose
progress is deemed unsatisfactory must withdraw from the program.
Courses
Graduate courses are listed below, grouped by areas of research.
Course codes in parentheses are for Carleton University.
Not all of the following courses are necessarily given each year.
Geotechnical Engineering
CVG5100 (CIVJ 5000) DEEP FOUNDATIONS (3cr.)
Deep foundation types in North American practice (driven or bored piles, and slurry trench techniques); axial and lateral capacity and
settlement analysis for single piles and pile groups; field inspection methods; pile dynamics; performance and analysis of static test
loading.
CVG5106 (CIVJ 5006) SITE IMPROVEMENTS (3cr.)
Description, design procedures and usage of current site improvement techniques, including preloading, earth reinforcement, dynamic
consolidation, vibrocompaction, blasting densification, lime treatment, drains, and geotechnical fabrics.
Printed Date: 2015-02-17
2 / 12
CVG5161 (CIVJ 5106) MECHANICS OF UNSATURATED SOILS (3cr.)
Introduction to unsaturated soils, phases of an unsaturated soil, phase properties and relations, stress state variables for saturated and
unsaturated soils. Measurement of soil suction: theory of soil suction, capillarity, measurements of total suction and matric suction. Flow
Laws: flow of water and measurement of permeability, shear strength theory: history, failure envelope for unsaturated soils, triaxial and
direct shear tests, typical results, simple testing procedures, volume change behavior including expansive soils behavior. Soil-water
Geotechnical Engineering
CVG5100 (CIVJ 5000) DEEP FOUNDATIONS (3cr.)
Deep foundation types in North American practice (driven or bored piles, and slurry trench techniques); axial and lateral capacity and
settlement
analysis for single piles and pile groups; field inspection methods; pile dynamics; performance and analysis of static test
Civil Engineering
loading.
CVG5106 (CIVJ 5006) SITE IMPROVEMENTS (3cr.)
Description, design procedures and usage of current site improvement techniques, including preloading, earth reinforcement, dynamic
consolidation, vibrocompaction, blasting densification, lime treatment, drains, and geotechnical fabrics.
CVG5161 (CIVJ 5106) MECHANICS OF UNSATURATED SOILS (3cr.)
Introduction to unsaturated soils, phases of an unsaturated soil, phase properties and relations, stress state variables for saturated and
unsaturated soils. Measurement of soil suction: theory of soil suction, capillarity, measurements of total suction and matric suction. Flow
Laws: flow of water and measurement of permeability, shear strength theory: history, failure envelope for unsaturated soils, triaxial and
direct shear tests, typical results, simple testing procedures, volume change behavior including expansive soils behavior. Soil-water
characteristic curve: its behavior and use in predicting the engineering properties of unsaturated soils, practical applications of the
principles of unsaturated soils.
CVG5175 NUMERICAL METHODS FOR GEOTHECHNICAL ENGINEERS (3cr.)
Non-linear analysis of stresses and deformations using the effective stress concept; analysis of consolidation using the excess pore water
pressure concept; flow through porous media; finite element, discrete element and finite difference methods; applications to foundations
of structures, retaining walls, dams, tunnels, pipelines, human-made and natural slopes in rock and soil.
CVG5178 (CIVJ 5108) ICE MECHANICS (3cr.)
Ice conditions in the Arctic; ice physics; classification of ice; mechanical properties of ice; mathematical modelling of creep and fracture
behaviour of ice; offshore structures in arctic environments; ice forces acting on structures; ice induced vibrations; iceberg impact loads;
physical modelling of ice-structure interaction; ice as a construction material; case histories.
CVG7100 (CIVE 5209) CASE STUDIES IN GEOTHECHNICAL ENGINEERING (3cr.)
CVG7108 (CIVE 5504) SEEPAGE AND WATER FLOW THROUGH SOILS (3cr.)
Structural Engineering
CVG5142 (CIVJ 5201) ADVANCED STRUCTURAL DYNAMICS (3cr.)
Dynamic behaviour of civil engineering structures under excitations due to earthquakes, wind, waves, etc. Advanced methods in dynamic
analysis of structures. Prediction of structural response. Design considerations.
CVG5143 (CIVJ 5202) ADVANCED STRUCTURAL STEEL DESIGN (3cr.)
Analysis of thin-walled beams, design applications including members under combined forces, analysis and design of beams under nonuniform torsion, limit state design methodology, comparative study of modern structural steel standards, formulating elastic and plastic
interaction relations for members under combined forces, designing columns, beams, beam columns, for cross-sectional strengths, local
buckling and global stability considerations, design of bracing systems.
CVG5144 (CIVJ 5300) ADVANCED REINFORCED CONCRETE (3cr.)
Study of the elastic and inelastic response of reinforced concrete structures under monotonic and cyclic loading. Methods for predicting
structural behaviour of concrete elements. The relationship between recent research results and the building codes.
CVG5145 (CIVJ 5203) THEORY OF ELASTICITY (3cr.)
Printed Date: 2015-02-17
3 / 12
Stress-strain relations. Theories of plane stress and plane strain. Use of stress functions, energy and variational methods in the analysis of
elastostatic problems.
CVG5146 (CIVJ 5302) NUMERICAL METHODS OF STRUCTURAL ANALYSIS (3cr.)
Numerical procedures and methods of successive approximations for the solution of structural problems. Virtual work, principles of
4 / 12
CVG7124 (CIVE 5105) ADVANCED FINITE ELEMENT ANALYSIS IN STRUCTURAL MECHANICS (3cr.)
CVG7126 (CIVE 5204) BEHAVIOUR AND DESIGN OF STRUCTURAL STEEL MEMBERS (3cr.)
CVG7144
(CIVE 5606) DESIGN OF CONCRETE BRIDGES (3cr.)
Printed Date: 2015-02-17
CVG7145 (CIVE 5607) INTRODUCTION TO BRIDGE DESIGN (3cr.)
5 / 12
CVG7142
ENGINEERING MANAGEMENT (3cr.)
Civil Engineering
CVG7143 (CIVE 5605) DESIGN OF STEEL BRIDGES (3cr.)
Transportation Engineering
CVG7150 (CIVE 5304) INTERCITY TRANSPORTATION, PLANNING AND MANAGEMENT (3cr.)
6 / 12
Environmental Engineering
CVG5130 (ENVJ 5900) WASTEWATER TREATMENT PROCESS DESIGN (3cr.)
The physical, chemical and biological processes involved in the treatment of domestic and industrial wastes. Waste characteristics, stream
assimilation, biological oxidation, aeration, sedimentation, anaerobic digestion, sludge disposal.
CVG5132 (ENVJ 5901) UNIT OPERATIONS OF WATER TREATMENT (3cr.)
Unit operations and unit processes involved in the treatment of a water supply for various uses. Topics included are: water quality, water
microbiology, sedimentation, chemical treatment, disinfection, water chemistry, flocculation.
CVG5133 (ENVJ 5906) SOLID WASTE DISPOSAL (3cr.)
Collection and disposal of solid wastes. Sanitary landfill, composting, incineration and other methods of disposal. Material and energy
recovery.
CVG5134 (ENVJ 5907) CHEMICAL ANALYSIS FOR ENVIRONMENTAL ENGINEERING (3cr.)
Dilute aqueous solution chemistry of water and wastewater treatment. Chemical kinetics and equilibrium. Carbonate, phosphate and
chlorine chemistry. Precipitation and complex formation. Corrosion. Analytical techniques and applications.
CVG5137 (ENVJ 5905) WATER AND WASTEWATER TREATMENT PROCESS ANALYSIS (3cr.)
Mass balancing in complex systems. Reaction kinetics and kinetic data analysis: classical and computer based methods. Reactor design:
ideal reactors and real reactors. Analysis of tracer tests. Interfacial mass transfer: common theories. Mass transfer models. Prerequisite:
CVG 3132 or equivalent. Students with a Chemical Engineering background may not take this course for credit.
CVG5138 (ENVJ 5902) ADVANCED WATER TREATMENT (3cr.)
Scope, limitations and design procedures for water treatment processes for the removal of toxic and non-standard contaminants. Current
water treatment problems and regulations, activated carbon treatment, ion exchange, disinfection practices and oxidation via advanced
oxidation processes (ozonation and UV oxidation), iron and manganese removal, recent developments in coagulation, membranes, air
stripping. Prerequisite: CVG 3132 or equivalent.
CVG5139 (ENVJ 5700) ENVIRONMENTAL ASSESSMENT OF CIVIL ENGINEERING PROJECTS (3cr.)
Procedures and methods for systematic evaluation of the environmental impact of civil engineering projects including wastewater disposal
systems, solid waste disposal systems, and water resource development systems.
CVG5179 (ENVJ 5908) ANAEROBIC DIGESTION (3cr.)
Printed Date: 2015-02-17
7 / 12
Advanced theoretical, biological, and practical aspects of anaerobic digestion processes. Principles to be applied to the design and
application of conventional and advanced anaerobic processes used for treatment of municipal and industrial wastewaters. Topics to
include microbiology and biochemistry fundamentals, techniques for monitoring anaerobic digestion performance, municipal sludge
stabilization, anaerobic composting, anoxic/anaerobic bioremediation, Andrew's dynamic model. Design of the following: two-phase
digestion; Downflow Stationary Fixed Film (DSFF) reactors; Upflow Anaerobic Sludge Blanket (UASB); Upflow Blanket Filter (UBF)
CVG5137 (ENVJ 5905) WATER AND WASTEWATER TREATMENT PROCESS ANALYSIS (3cr.)
Mass balancing in complex systems. Reaction kinetics and kinetic data analysis: classical and computer based methods. Reactor design:
ideal reactors and real reactors. Analysis of tracer tests. Interfacial mass transfer: common theories. Mass transfer models. Prerequisite:
CVG 3132 or equivalent. Students with a Chemical Engineering background may not take this course for credit.
CVG5138 (ENVJ 5902) ADVANCED WATER TREATMENT (3cr.)
Scope, limitations and design procedures for water treatment processes for the removal of toxic and non-standard contaminants. Current
water treatment problems and regulations, activated carbon treatment, ion exchange, disinfection practices and oxidation via advanced
oxidation processes (ozonation and UV oxidation), iron and manganese removal, recent developments in coagulation, membranes, air
stripping. Prerequisite: CVG 3132 or equivalent.
Civil Engineering
CVG7162 (ENVE 5103) AMBIENT AIR QUALITY AND POLLUTION MODELLING (3cr.)
CVG7164 (ENVE 5203) MULTIPHASE FLOW AND CONTAMINANT TRANSPORT MODELLING (3cr.)
Additionnal courses
CVG5112 (CIVJ 5502) COMPUTATIONAL HYDRODYNAMICS (3cr.)
Finite volume methods for advection, diffusion and shallow water equations using structured and unstructured grids, finite volume
methods for incompressible Navier-Stokes equations (SIMPLE, SIMPLEC, PISO), error analysis: numerical diffusion and dispersion,
truncation errors and Fourier analysis, introduction to turbulence modeling, introduction to methods for tracking free surfaces and
moving beds introduction to other methods in hydrodynamics: finite element, finite difference, Chebyshev and Fourier spectra, semi
Lagrangian and vortex methods inhydrodynamics.
CVG5311 BRIDGE DESIGN (3cr.)
Design of highway bridges according to the Canadian Highway Bridge Design Code (CHBDC). Comparisons with other bridge codes (e.g.,
the American Code - AASHTO, the European, the New Zealand, and the British bridge codes). The topics covered include the following:
main structural components of highway bridges; types of highway bridges; serviceability and ultimate limit state design requirements;
design loads (dead loads, traffic loads, seismic loads, and wind loads); load combinations; code specifications for loading due to traffic
(design lane, characteristics of design truck, positions of design truck on bridge, etc.); dynamic effects due to traffic loads; practical
approaches specified in CHBDC for determining forces and deflections in structural embers; principles of capacity design in highway
bridges.
Printed Date: 2015-02-17
8 / 12
CVG5312 DURABILITY OF CONCRETE STRUCTURES (3cr.)
Properties of cementitious materials (constituents of concrete; hydration of cement; structure of hardened concrete; transport processes in
concrete); deterioration of concrete (built-in problems; construction defects; cracking; dimensional stability; alkali-aggregate reaction;
sulphate attack; corrosion of reinforcing steel; freezing-thawing cycles); (iii) evaluation of concrete structures (inspection; in-situ testing;
CVG9999THSEDEDOCTORAT/PhDTHESIS
Pourlestudiantsquirdigentleurthsededoctorataprsavoirfaitleurtravailderechercheenlaboratoire./Forstudentswritingtheir
PhD thesis after completion of laboratory research.
Programs
Master of Applied Science Civil Engineering
Master of Engineering Civil Engineering
Doctorate in Philosophy Civil Engineering
Address
Ottawa-Carleton Institute for Civil Engineering
161 Louis-Pasteur, Colonel By Hall, room B111
Ottawa, ON
K1N 6N5
Canada
Telephone: 613-562-5800 - 6189
Fax: 613-562-5129
Email : engineering.grad@uottawa.ca
http://www.ocice.ca/members2-2
Professors
ADAMOWSKI, Kazimierz, Adjunct Professor
Regional flood and low-flow analysis; space-time modelling of precipitation; regional ranifall intensity frequency analysis; effect of global
warming on hydrology; hydrological modelling using remotely sensed observations
ALIZADEH, Rouhollah, Adjunct Professor
Printed Date:Ioan,
2015-02-17
NISTOR,
Associate Professor
Hydraulic engineering; Coastal Engineering: Surf Zone Hydrodynamics and Sediment Transport, Tsunamis, Coastal Structures,
Contaminated Sediments
11 / 12
12 / 12