Technical Data
Features:
Receiver
Cable, Sonde & Marker Locator
Electronic Marker System (EMS) Detection
Marker iD Read Capability
Signal Select
Distortion Alert
Left/Right Guidance Arrows
Guidance Compass
Data Logging Available With Mylocator
Bluetooth
The i5000 MetroMark utility locator combines Vivax-Metrotechs
advanced line locating technology and electronic marker system (EMS)
detection in a single instrument. Capable of detecting and measuring the
depth of all commercially available markers, the i5000 MetroMark has the
added ability of reading serial numbers of programmable Marker iDs.
Access the i5000s line locating or marker detection mode with one press
of the receivers softkey. The intuitive operational display provides simple
maneuvering of all the available features frequency selection, marker
selection, automatic or manual signal gain, and access to the main menu
for other advanced features.
Transmitter
10 Watt
Signal Select
Transmit Up To Three Frequencies
Simultaneously
Bluetooth
Power Protection
Line Voltage Meter
Standard Equipment:
Complete kit consists of
MetroMark Receiver
10W Transmitter
Ground Spike
Insulated Conductive Attachments
Operations Manual
Carrying Case
Options:
Accessories:
Inductive Clamps
Soft Cases
Search Coil
Receiver
Electronic Marker System (EMS) Detection Mode
Detection Range (passive)
5ft (1.5m), depending upon soil conditions and marker type
Marker Read Capability
Depth
10 digit ID number (XXX-XXX-XXXX), 3M EMS Marker iD only
Marker iD Read Range
Up to 3ft (0.9m)
Operating Frequencies
Utility
Market Color
Icon
Power
Red
Frequency (kHz)
169.8
Water
Blue
145.7
Sanitary
Green
121.6
Telephone
Orange
101.4
Gas
Yellow
83.0
CATV
Orange/Black
77.0
Reclaimed Water /
General Purpose
Purple
66.35
System
Operating Temperature
Batteries
Battery Life
Battery Check
Dimensions
Weight
Regulatory Compliance
Environmental
Display
Communications
Data Acquisition
Transmitter
Output Frequencies
Output Power
Simultaneous Output
Controls
Display Indicators
Display
Batteries
Battery Life
Operating Temperature
Dimensions
Weight
Regulatory Compliance
Environmental
491Hz, 982Hz, 8.44 kHz, 9.82 kHz, 35 kHz, 82 kHz, 83 kHz (direct)
9.82 kHz, 82 kHz (inductive)
Extended and special frequency sets available
Variable to 10W
Up to three active frequencies
Frequency select
Measurement units (mA, Volts, Ohms, Watts)
Output power
Signal SelectTM
Menu
4-way navigation select
SFL
On/off
Battery status
Audio volume
Output mode
Frequency setting
Frequency output
% output in SFL or induction mode
Output graph
Loop resistance graph
VGA monochrome
Li-ion rechargeable
Up to 12 hours continuous, depending upon use
-4F to 122F (-20C to 50C)
9in(L) x 11in (W) x 6.75in (H) (229mm x 279mm x 171mm)
8.24lbs (3.7kg)
FCC, CE
IP54