MODEL: A-17
A-17 is our 60 Tonne reel capacity spooling machine. It comes complete with hydraulically
controlled under rollers to assist in loading/unloading in a dynamic environment.
The Spooling unit comes equipped with a double hagglund motor capable of delivering
back tension up to 34 tonne.
Reel Size
Max Reel Width
Min Reel Width
Max Flange Height
2700mm
1100mm
1700mm
Spooler Dimensions
Width
Length
Height
Weight
2600mm
5400mm
2790mm
10,000kgs
The spooling unit has certified lifting points and is provided with load test certificates.
Brochure contains general information only. All information is believed to be correct but no warranty is
given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any
product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any
loss, claim or damage arising from any information contained in this brochure.
MODEL: A-46
A-46 is our 100 Tonne reel capacity spooling machine. It comes complete with under rollers
to assist in loading in a dynamic environment. The spooling unit comes equipped with a
double hagglund motor capable of delivering back tension up to 34 Tonne.
Reel Size
Max Reel Width
Min Reel Width
Max Flange Height
Adjust to suit
1927mm
4000mm
Spooler Dimensions
Width
Length
3000mm
7638mm
Height
Weight
3214mm
16,000kgs
The spooling unit has certified lifting points and is provided with load test certificates.
Brochure contains general information only. All information is believed to be correct but no warranty is
given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any
product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any
loss, claim or damage arising from any information contained in this brochure.
MODEL: A-33
A-33 is a 150 Tonne reel capacity spooling machine. The spooling unit can provide up to
64 Tonne back tension. The machine is fully adjustable to accomodate different sized reels.
Reel Size
Max Reel Width
Min Reel Width
Max Flange Height
4429mm
2269mm
2000mm
Spooler Dimensions
Width
Length
Height
Weight
3100mm
8400mm
3400mm
20,000kgs
The spooling unit has certified lifting points and is provided with load test certificates.
Brochure contains general information only. All information is believed to be correct but no warranty is
given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any
product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any
loss, claim or damage arising from any information contained in this brochure.
MODEL: A-41
A-41 is our 300 Tonne drum weight capacity high performance spooling unit. The spooling
unit is fully adjustable by hydraulics. The spooling unit can provide constant back tension
up to 64 tonne.
Reel Size
Max Reel Width
Min Reel Width
Max Flange Height
6182mm
1750mm
6000mm
Spooler Dimensions
Width
Length
Height
Weight
3374mm
8876mm
3701mm
20,000kgs
The spooling unit has certified lifting points and is provided with load test certificates.
Brochure contains general information only. All information is believed to be correct but no warranty is
given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any
product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any
loss, claim or damage arising from any information contained in this brochure.
MODEL: FOI-WN-S12
The 400 Tonne single drum winch or Big Blue, as she is known is a robust and efficient
winch. It is ideal for use in subsea deployment and has a constant tension ability for up to
385 Tonne.
Winch Specifications:
Rope Holding Capacity
Maximum Pull
Hoisting Speed
Drum Dimensions
Width
Barrel Diameter
Flange Diameter
2580mm
1800mm
3400mm
4960mm
4960mm
4280mm
80,000kgs
Brochure contains general information only. All information is believed to be correct but no warranty is
given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any
product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any
loss, claim or damage arising from any information contained in this brochure.
MODEL: SD-WN-28
Our 150 Tonne single drum winch has the advantage of being complete with its own
power pack. The robust design and accurate controls means it is highly practical for winch
operations.
Winch Specifications:
Maximum Pull
Hoisting Speed
Hoisting Speed
Drum Dimensions
Width
Barrel Diameter
Flange Height
1370mm
1016mm
690mm
4048mm
4605mm
3740mm
36,000kgs (Bare)
Brochure contains general information only. All information is believed to be correct but no warranty is
given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any
product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any
loss, claim or damage arising from any information contained in this brochure.
MODEL: DD (1-8)
Our fleet of 8 units x double drum winches are operational friendly and designed to run 4x
or 8x mooring spreads for barges and can be set up to the customers specific project needs.
Winch Specifications:
C/W Hydraulic Power Pack
Maximum Pull
Hoisting Speed
Hoisting Speed
Brake Hold 150 Tonne Static
DD / Rope Capacity
DD / Dimensions
Width
Length
Height
Weight
3910mm
5715mm
3915mm
48,000kgs (Bare)
Brochure contains general information only. All information is believed to be correct but no warranty is
given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any
product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any
loss, claim or damage arising from any information contained in this brochure.
MODEL: LW - 1
The 400 Tonne linear winch can haul in horizontal loads under automatic or manual mode.
The unit is equipped with contactless limit switches which aids in continuous operation
without delay.
Winch Specifications:
2375mm
11800mm
900mm (without davits installed)
40,000kgs
Brochure contains general information only. All information is believed to be correct but no warranty is
given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any
product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any
loss, claim or damage arising from any information contained in this brochure.
MODEL: CT-1
This system was built to meet the operational needs to cross tension chain at high loads.
The unit is robust and complete with its own HPU. The unit is supplied with MPI/NDT reports
for all load bearing areas.
Chain Tensioner Specifications:
Max. Diameter of Chain
127mm
Min. Diameter of Chain
76mm
Tension Stroke
1800mm
Push Speed
0.9mt/min
Pull Speed
1.5mt/min
Pressure transduced tension read out
Chain Tensioner Dimensions
Width
Length
Height
Weight
2121mm
9064mm
950mm
23,000kgs
Brochure contains general information only. All information is believed to be correct but no warranty is
given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any
product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any
loss, claim or damage arising from any information contained in this brochure.
MODEL: H-40
Our hub under roller spooling unit can be used to install under control speed flexible riser
or spiral strand to a track tensioning unit.
Hub Spooler Specifications:
Max. Storage Capacity
Max. Drum Flange Diameter
Min. Drum Flange Diameter
Hoisting Speed
Hoisting Force
Back Tension Force / Brake Force
350 Tonne
9800mm
6000mm
2 RPM
16 Tonne
16 Tonne
Spooler Dimensions
Width
Length
Height
Weight
6930mm
7500mm
1000mm
17,000kgs
Brochure contains general information only. All information is believed to be correct but no warranty is
given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any
product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any
loss, claim or damage arising from any information contained in this brochure.
TRACK TENSIONER
MODEL: TT-1
The track tensioner has the ability to lay flexible riser and umbilical subsea. It can be used in
conjunction with the H40 Hub spooling machine.
Track Tensioner Specifications:
Max. Diameter of Product
Min. Diameter of Product
Clamping Length
Max. Clamping Force
Max. Pulling Force
Max. Hold - Back Tension
50 V-Clamp per track
Track Tensioner Dimensions
Width
Length
Height
Weight
800mm
200mm
2.812mt
46 Tonne
19.8 Tonne
23.3 Tonne
2400mm
5916mm
4361mm
19,000kgs
Brochure contains general information only. All information is believed to be correct but no warranty is
given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any
product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any
loss, claim or damage arising from any information contained in this brochure.
RIGGING LOFT
MODEL: RL-1
The Franklin rigging loft is a portable container complete with all the rigging equipment
and test certificates. Each unit is designed to customers rigging requirements.
Specifications can include:
110/220 Volt Power Supply
Internal and External Lighting
Explosive Proof Fittings and Lighting
Work Bench with Bench Vice
Rigging Loft Dimensions
Width
Length
Height
Weight
2439mm
3048mm
2439mm
10,000kgs
Brochure contains general information only. All information is believed to be correct but no warranty is
given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any
product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any
loss, claim or damage arising from any information contained in this brochure.