How To Procedure
GOT Program Restore using GT Designer 3
Revision: A
Purpose: To restore all program files to the GOT
Required Tools:
Consumable Parts:
None
1|Page
R72-121-SLSASG-005
Task 1: Connect the USB MINI B cable between PCs USB port and GT1000 Front USB port.
When cable is connected for the first time the USB Driver will automatically be installed.
.
Pull here to
access the
USB port
2|Page
R72-121-SLSASG-005
Pull here to
access the
USB port
Task 2: Open the GT Designer3 back up saved Project File from hard drive location and double click on
the [*.GTW] file.
3|Page
R72-121-SLSASG-005
b) Select [USB]
4|Page
R72-121-SLSASG-005
Step 2: Click the [OK] Button, USB should be the Communication method selected.
5|Page
R72-121-SLSASG-005
Step 3: Click the [GOT Write] button. All other items should be kept at Default as shown here except the
two items below.
1. If a Compact Flash Card is installed and the Project Files are too large to fit in the [C:
Built-in Flash Memory], Select [A: Standard CF Card] in the Destination Drive
Selection. Item a.
2. If this is a NEW GOT, the selection [Include required OS in the project data] must also
be selected. Item b.
b
a
6|Page
R72-121-SLSASG-005
7|Page
R72-121-SLSASG-005
The Communicate with GOT Window will now appear and show you the Write Data Size and the
Write Drive Information.
8|Page
R72-121-SLSASG-005