SERVICE
UPService, our technical assistance facility uses highly trained engineers to provide a reliable and competent technical support and
after-sales service.
UPService can provide customers with:
A dedicated CALL CENTRE for connection to the UPService organisation. UPService personnel are always available and ready to provide
advice and assistance regarding UPS installation, maintenance, fault finding and repair.
FAST & READY A fast repair on site is guaranteed through the use of state-of-the-art UPS technology and the professionalism of the
UPService personnel and Authorised Assistance Centres. UPService guarantees that failed parts are replaced with original ones, tested
and updated in order to maintain the safety, reliability and operating characteristics of the UPS.
COMMISSIONING AND START-UP UPService can provide assistance during commissioning and startup of the UPS equipment on-site with
additional training during handover to site personnel. UPService engineers can also verify site suitability, analyse and advise on potential
problems, and disconnect and relocate equipment. UPService recommend that all hardwired installations are commissioned by UPService
engineers.
MAINTENANCE CONTRACTS can be provided by UPService to minimise response times and repair costs. Contracts range from periodic
inspections to comprehensive cover including labour and materials.
The TELEGUARD software package provides remote 24x7 UPS supervision. TeleGuard can interrogate G-TEC UPS connected to a local
telephone line to check on their operating logs and system status. Should the UPS report an alarm condition, the UPService Call Centre is
immediately notified and a dedicated customer response activated. Routine site reports can be sent automatically to customer personnel.
UPService organises regular TECHNICAL TRAINING COURSES for UPS operators and installers.
Working in Power
Working in Power
SMK&STK
Voltage Stabilizer
TECHNICAL ASSISTANCE
SERVICE
www.gtec-power.eu
01-45
SMK
003-450
STK
The increase of voltage sensitive equipment has determined a continuous request for means able to guarantee the
supply of steady voltage independently from mains variations.
The voltage stabilizer has proved to be an efficient answer in order to prevent from potential damages due to input
voltage fluctuation.
The GTEC SMK stabilizer is a single-phase product, from 1,2kVA to 45kVA, belong to the electromechanical
series with electronic control.
They provide a perfect constant single-phase output voltage completely independent from any variation of the input
voltage within the accepted voltage range. The stabilisation of the output voltage is not affected neither by eventual
harmonic distortion present in the mains nor by the value and load power factor; the output power distortion is very
low (less than 2%) and the total efficiency is very high.
230V
50-60 Hz
0-100%
+/- 1%
150% / 1 min.
0-1
> 98%
< 0,2%
< 20msec/V
A.N
-10 : +45 C
< 96%
RAL 7035/7028
IP 21
NOTE:
The SMK from 1,2-15kVA is provided
with lamp indicator as standard, all
the other sizes have analog voltmeter
as standard.
Input Voltage
Frequency
Load Variation Range
Phase Unbalanced
Output Voltage Accuracy
Max Overload
Load Power Factor
Efficiency
Waveform Distortion
Speed Regulation
Cooling
Ambient temperature
Relative humidity
Colour
Protection
400V
50-60 Hz
0-100%
< 50% for T 100% for Y
+/- 1%
150% / 1min
0-1
> 98%
< 0,2%
< 20msec/V
A.N. or A.F.
-10 : +45 C
< 96%
RAL 7032
IP 21
SMK01-45
Single-phases Voltage
Stabilizer
TECHNICAL SPECIFICATION
CODE
Pn/kVA 15%
Pn/kVA 20%
Voltage Vac
SMK 01
SMK 02
SMK 04
SMK 06
SMK 10
SMK 15
SMK 20
SMK 25
SMK 30
SMK 40
1,2
2
4
6
10
15
20
25
30
45
0,8
1,5
3
4,5
7,5
11
15
20
25
35
230
230
230
230
230
230
230
230
230
230
D (mm) W (mm)
300
300
300
300
520
520
520
280
280
400
240
240
240
240
240
240
240
900
900
1100
5
003-4
0
T
STK
H (mm)
Weight (kg)
Panel Interface
300
300
300
300
300
300
300
580
580
650
16
19
22
26
36
44
85
105
125
175
LED indicator
LED indicator
LED indicator
LED indicator
LED indicator
LED indicator
Analog Voltmeter
Analog Voltmeter
Analog Voltmeter
Analog Voltmeter
TECHNICAL SPECIFICATION
CODE
Pn/kVA 15%
Pn/kVA 20%
Voltage Vac
STK 003 T
STK 006 T
STK 012 T
STK 018 T
STK 024 T
STK 030 T
STK 050 T
STK 060 T
STK 075 T
STK 100 T
STK 135 T
STK 150 T
STK 175 T
STK 230 T
STK 300 T
3
6
12
18
24
30
50
60
75
100
135
150
175
230
300
2,4
4,5
9
13,5
18
24
34
45
60
75
105
120
130
175
230
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
D (mm) W (mm)
230
230
230
580
580
580
650
650
650
650
900
900
900
605
1200
490
490
490
280
280
280
400
400
400
400
500
500
500
850
850
5
003-4
0
Y
STK
H (mm)
Weight (kg)
Panel Interface
490
490
490
900
900
900
1100
1100
1100
1100
1200
1200
1200
1650
1700
62
77
90
115
155
175
195
318
400
495
530
635
820
1200
1300
LED Indicator
LED Indicator
LED Indicator
Analog Voltmeter
Analog Voltmeter
Analog Voltmeter
Analog Voltmeter
Analog Voltmeter
Analog Voltmeter
3-phases Analyzer
3-phases Analyzer
3-phases Analyzer
3-phases Analyzer
3-phases Analyzer
3-phases Analyzer
TECHNICAL SPECIFICATION
CODE
Pn/kVA 15%
Pn/kVA 20%
Voltage Vac
STK 003 Y
STK 006 Y
STK 012 Y
STK 018 Y
STK 024 Y
STK 030 Y
STK 050 Y
STK 060 Y
STK 075 Y
STK 100 Y
STK 135 Y
STK 150 Y
STK 175 Y
STK 230 Y
STK 300 Y
STK 450 Y
3
6
12
18
24
30
50
60
75
100
135
150
175
230
300
450
2,4
4,5
9
13,5
18
24
34
45
60
75
105
120
130
175
230
300
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
D (mm) W (mm)
230
230
230
580
580
580
650
650
650
650
900
900
900
605
1200
1800
490
490
490
280
280
280
400
400
400
400
500
500
500
850
850
850
H (mm)
Weight (kg)
Panel Interface
490
490
490
900
900
900
1100
1100
1100
1100
1200
1200
1200
1650
1700
1700
62
77
90
115
155
175
195
318
400
495
530
635
820
1200
1300
1600
LED Indicator
LED Indicator
LED Indicator
Analog Voltmeter
Analog Voltmeter
Analog Voltmeter
Analog Voltmeter
Analog Voltmeter
Analog Voltmeter
3-phases Analyzer
3-phases Analyzer
3-phases Analyzer
3-phases Analyzer
3-phases Analyzer
3-phases Analyzer
3-phases Analyzer