1 Shri Instuments,
2 Bibus Horizon Mechatronics And Automation Pvt Ltd
3 Leelavati Automation Pvt Ltd,
4 Kudamm Corporation,
5 Sensor India
6 Captron Corporation
7 Servo Enterprises
8 Futuristic climate Contol
9 Proximon Control Pvt Ltd.
Signaling Technology
For ten years we develop and manufacture products of signaling
technology. Our indicator lights, signal lights and displays can not be
Optical Sensors
Optical sensors can be used for correctly detecting, capturing and positioning objects.
Our products stand for maximum precision, reliability and quality, as well as for easy
installation, irrespective of whether this is an infrared, red light or laser light barrier. One
of our developed custom-built products is the laser TCP unit for accurate zero point
centring of industrial robots adapted entirely to your individual requirements on
request.
Every sector has particular product and material specification requirements as regards
fill level measurement technology. The CAPselect system from CAPTRON offers
maximum individuality for assembling level sensors, which can be configured according
to application area and medium. Ongoing adaptations to common norms and regulations
mean that CAPTRON level sensors are particularly well suited for the foodstuffs and
pharmaceutical sectors.
Product characteristics:
Sector-specific individual
PROBES
DescriptionThe probe amplifier is firmly connected to the rod probe via a
process connection. After installation, the probe amplifier can be moved to the
desired position up to 350 by unscrewing the fixing screw. It is also available in
hygienic version (V4A)
Dimension
Supply voltage
Maximum load current
Hysterisis
Operating temperature
Output transistor
Output logic
Environmental protection
Temperature drift
Switch - On effect suppression
Reverse polarity protection
Short circuit protection
Status indication
Sensing range
Dimension
Supply voltage
Supply frequency
Load current
Hysterisis
Output logic
Status indication
Sensing range
M30 X 1.5 X 75 mm
90-250 VAC
45 - 65 Hz
500mA max
15% max
NO or NC
Throught LED
15 mm adjustable through Potentiometer
which has already been useful and we really appreciate. At this stage, we are
looking into the requirements for different applications, ranging from medical to
non-destructive testing applications, but more interestingly looking for new
applications where CMUTs can provide a definite advantage over current
ultrasonic transducers. In fact, the aim is to develop applications for customers
that could benefit from this new technology. Therefore, we invite everyone
interested on developing new ultrasonic applications to contact us to explore the
possibilities of CMUTs. was adopted for the fabrication of the CMUTs. This was
preferred over the wafer bonding technique alternative, as many of the
fabrication steps were already characterized over the last years during the SLM
projects. At the same time, a complete process flow was specified, including
materials and available film thicknesses. Initial FEM models of the CMUT
elements were built to explore the design space, and several CMUT designs
were selected to obtain resonant frequencies in the range of 1 to 50 MHz.
Dimensions of CMUT elements ranged between 10 and 100 m, and are to be
packed in groups of a few hundred, meaning that all these CMUTs operate as a
single structure. Even though many of the fabrication steps have previously been
characterized for the SLMs, it was necessary to explore parameters, such as the
deposition stresses and the release times for different number of release holes
and CMUT dimensions in a wafer lot. As an extension to this experimental wafer
lot, the cavities where sealed and electrical contact pads added, yielding the first
testable CMUTs built by Fraunhofer IPMS.
Accuracy: 0.5%
Available Size
6.4 to 19(Special
request for 5.7" to 10"
is available.)
Input Method
Finger
Features:
The oscillations stage initiates with the appearance of medium in active
area
Switching stage rectifies
Switches high frequency oscillations
DC signal triggers output stage
Switching stage incorporates signal feedback system
Using potentiometer, the level is adjusted
Specifications:
Switching Frequency: 100 HZ to 25 KHZ
Protection: IP 67/SCP/OLP