Anda di halaman 1dari 273

NPT Product Line

Version 3.1

System Specifications

NPT System Specifications


V3.1
Catalog No: X91385
Drawing No: 417006-2012-053-A00
June 2014
5th Edition

ECI's NPT-1200, NPT-1020, NPT-1021, and NPT-1010 products comply with CE2.0 standard.
ECI's NPT-1600 product complies with MEF9 and MEF14 standards.

ECI's qualification lab is accredited by A2LA for competence in electrical testing according to
the International Standard ISO IEC 17025-2005 General Requirements for the Competence of
Testing and Calibration Laboratories.
ECI's management applications run on VMWare virtualization hypervisors.
Copyright by ECI, 2012-2014. All rights reserved worldwide.
This is a legal agreement between you, the end user, and ECI Ltd. (ECI). BY OPENING THE DOCUMENTATION AND/OR DISK PACKAGE, YOU ARE
AGREEING TO BE BOUND BY THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, PROMPTLY RETURN
THE UNOPENED DOCUMENTATION AND/OR DISK PACKAGE AND THE ACCOMPANYING ITEMS (INCLUDING WRITTEN MATERIALS AND BINDERS OR
OTHER CONTAINERS), TO THE PLACE FROM WHICH YOU OBTAINED THEM.
The information contained in the documentation and/or disk is proprietary and is subject to all relevant copyright, patent, and other laws protecting
intellectual property, as well as any specific agreement protecting ECI's rights in the aforesaid information. Neither this document nor the
information contained in the documentation and/or disk may be published, reproduced, or disclosed to third parties, in whole or in part, without
the express prior written permission of ECI. In addition, any use of this document, the documentation and/or the disk, or the information contained
therein for any purposes other than those for which it was disclosed, is strictly forbidden.
ECI reserves the right, without prior notice or liability, to make changes in equipment design or specifications. Information supplied by ECI is
believed to be accurate and reliable. However, no responsibility whatsoever is assumed by ECI for the use thereof, nor for the rights of third parties,
which may be affected in any way by the use and/or dissemination thereof.
Any representation(s) in the documentation and/or disk concerning performance of ECI product(s) are for informational purposes only and are not
warranties of product performance or otherwise, either express or implied. ECI's standard limited warranty, stated in its sales contract or order
confirmation form, is the only warranty offered by ECI.
The documentation and/or disk is provided AS IS and may contain flaws, omissions, or typesetting errors. No warranty is granted nor liability
assumed in relation thereto, unless specifically undertaken in ECI's sales contract or order confirmation. Information contained in the
documentation and in the disk is periodically updated, and changes will be incorporated in subsequent editions. If you have encountered an error,
please notify ECI. All specifications are subject to change without prior notice.
The documentation and/or disk and all information contained therein is owned by ECI and is protected by all relevant copyright, patent, and other
applicable laws and international treaty provisions. Therefore, you must treat the information contained in the documentation and disk as any
other copyrighted material (for example, a book or musical recording).
Other Restrictions. You may not rent, lease, sell, or otherwise dispose of the documentation and disk, as applicable. YOU MAY NOT USE, COPY,
MODIFY, OR TRANSFER THE DOCUMENTATION AND/OR DISK OR ANY COPY IN WHOLE OR PART, EXCEPT AS EXPRESSLY PROVIDED IN THIS LICENSE.
ALL RIGHTS NOT EXPRESSLY GRANTED ARE RESERVED BY ECI.
All trademarks mentioned herein are the property of their respective holders.
ECI shall not be liable to you or to any other party for any loss or damage whatsoever or howsoever caused, arising directly or indirectly in
connection with this documentation and/or disk, the information contained therein, its use, or otherwise. Notwithstanding the generality of the
aforementioned, you expressly waive any claim and/or demand regarding liability for indirect, special, incidental, or consequential loss or damage
which may arise in respect of the documentation and/or disk and/or the information contained therein, howsoever caused, even if advised of the
possibility of such damages.
The end user hereby undertakes and acknowledges that they read the "Before You Start/Safety Guidelines" instructions (when provided by ECI) and
that such instructions were understood by them.
It is hereby clarified that ECI shall not be liable to you or to any other party for any loss or damage whatsoever or howsoever caused, arising directly
or indirectly in connection with you fulfilling and/or failed to fulfill in whole or in part the "Before You Start/Safety Guidelines" instructions.
All graphics included in this document are for illustrative purposes only and might not correspond with your specific product version.

Contents
1

About This Manual ...................................................................................... 1-1


1.1

Intended Audience................................................................................................................. 1-1

1.2

Document Organization ......................................................................................................... 1-1

1.3

Notes and Warnings............................................................................................................... 1-1

1.4

Related Documentation ......................................................................................................... 1-2

1.5

How to Obtain ECI Technical Documentation ....................................................................... 1-3

1.6

Technical Assistance .............................................................................................................. 1-3

Overview ..................................................................................................... 2-1


2.1

All-Native Transport ............................................................................................................... 2-1

2.2

Introducing the NPT Product Line.......................................................................................... 2-2

NPT-1600/NPT-1600C Specifications ........................................................... 3-1


3.1

3.2

3.3

Electrical Interface Connection Modules ............................................................................... 3-1


3.1.1

Connection Module Data for Electrical I/O Cards ................................................................... 3-1

3.1.2

Optical Transceivers for I/O Cards........................................................................................... 3-2

3.1.3

Optical SFP Transceivers for I/O Cards .................................................................................... 3-3

PDH and SDH Interface Specifications ................................................................................... 3-3


3.2.1

2 Mbps (E1) ............................................................................................................................. 3-3

3.2.2

34 Mbps (E3) ........................................................................................................................... 3-4

3.2.3

45 Mbps (DS-3) ........................................................................................................................ 3-4

3.2.4

52 Mpbs (STS-1) ...................................................................................................................... 3-4

3.2.5

STM-1 Electrical ....................................................................................................................... 3-4

3.2.6

STM-1/OC-3 Optical ................................................................................................................ 3-5

3.2.7

STM-4/OC-12 Optical .............................................................................................................. 3-5

3.2.8

STM-16/OC-48 Optical ............................................................................................................ 3-5

3.2.9

STM-64/OC-192 Optical .......................................................................................................... 3-5

SDH Interfaces........................................................................................................................ 3-6


3.3.1

STM-1/OC-3 (155.52 Mbps 4.6 ppm) I/O Modules ............................................................... 3-6

3.3.2

STM-1/OC-3 SFP Optical Transceivers for OMS01_4 .............................................................. 3-7

3.3.3

STM-4/OC-12 (622 Mbps 4.6 ppm) I/O Modules .................................................................. 3-8

3.3.4

STM-4/OC-12 SFP Optical Transceivers for OMS04_1 ............................................................ 3-9

3.3.5

STM-16/OC-48 (2488.32 Mbps 4.6 ppm) I/O Modules ....................................................... 3-11

3.3.6

SDH STM-16/OC-48 SFP Optical Transceivers ....................................................................... 3-12

3.3.7

CWDM and DWDM STM-16/OC-48/OTU1 SFP Optical Transceivers .................................... 3-14

ECI Telecom Ltd. Proprietary

iii

NPT Product Line System Specifications

Contents

3.3.8

SDH STM-64/OC-192 (9953.28 Mbps 4.6 ppm) I/O Modules ............................................. 3-16

3.3.9

MECP_OSC Cards ................................................................................................................... 3-17

3.3.10 SDH STM-64/OC-192 XFP Optical Transceivers ..................................................................... 3-18


3.3.11 OW Unit Specifications .......................................................................................................... 3-19

3.4

NPT MPLS/Ethernet Card Summary .................................................................................... 3-20

3.5

Data Cards ............................................................................................................................ 3-21

3.6

3.5.1

MCS5 Specifications .............................................................................................................. 3-22

3.5.2

MCS10 Specifications ............................................................................................................ 3-23

3.5.3

MCS30_X10G Specifications .................................................................................................. 3-24

3.5.4

MCS50_X10G Specifications .................................................................................................. 3-25

3.5.5

Data Client Transceivers for MCS5, MCS10, MCS30_X10G, MCS50_X10G ........................... 3-27

3.5.6

Data Client XFP Transceivers for MCS30_X10G, MCS50_X10G ............................................. 3-28

3.5.7

Data Line XFP Transceivers for MCS30_X10G, MCS50_X10G ............................................... 3-29

Optical Components ............................................................................................................ 3-30


3.6.1

DWDM Mux/Demux Cards and Modules .............................................................................. 3-30

3.6.2

ROADM Cards ........................................................................................................................ 3-31

3.6.3

DWDM OADM Cards and Modules ....................................................................................... 3-35

3.6.4

CWDM Mux/Demux/OADM Components ............................................................................ 3-37

3.6.5

Transponders ........................................................................................................................ 3-39

3.6.6

OMCM25_4 STM-4/OC-12 SFP Optical Transceivers ............................................................ 3-45

3.6.7

OMCM25_4 & AoC GbE/FC1 SFP Transceivers ..................................................................... 3-46

3.6.8

OMCM25_4 & AoC FC2G Client SFPs .................................................................................... 3-46

3.6.9

10 Gbps Optical Client XFP Transceivers for Transponders and CMBR40B........................... 3-47

3.6.10 AoC/OMTR27_2 STM-16/OTU1 Client .................................................................................. 3-49


3.6.11 TRP10_4 CWDM OTU2 Line/Client STM-64/10G LAN/FC10/OTU2 XFP Optical
Transceivers and CMBR40B Client Transceivers ................................................................... 3-50
3.6.12 TRP10_4 OTU2/OTU2e/OTU2f Optical Transceivers............................................................. 3-51
3.6.13 TRP10_4 OTU2/OTU2e Line, STM-64/10G LAN/FC10 Client, AoC, CMBR10,
TRP10_LAN, TRP10_2B, OTU2 XFP Line Transceivers and CMBR40B Client
Transceivers .......................................................................................................................... 3-52
3.6.14 AoC, CMBR10, TRP10_LAN, TRP10_2B, OTU2 Line Transceivers .......................................... 3-53
3.6.15 STM-16/OTU1 Optical SFP Line Transceivers for OMTR27_2 & OMCM25_4 ....................... 3-54
3.6.16 OTU-2/OTU-2e/OTU-2f XFP tunable optical transceivers ..................................................... 3-57
3.6.17 Optical Amplifiers .................................................................................................................. 3-58
3.6.18 Optical Auxiliary Cards and Modules .................................................................................... 3-61
3.6.19 DCF/DCM Units ..................................................................................................................... 3-62
3.6.20 Rack Mounted Single Channel DCM Units ............................................................................ 3-62
3.6.21 Auxiliary Cards and Miscellaneous Accessory Modules ........................................................ 3-63

ECI Telecom Ltd. Proprietary

iv

NPT Product Line System Specifications

Contents

3.6.22 Other Optical Cards ............................................................................................................... 3-63

3.7

CWDM Frequencies and Wavelengths (ITU-T Rec. G.694.2 for CWDM) ............................. 3-64

3.8

C Band Channel Frequencies and Wavelengths (ITU-T Rec. G.694.1 for DWDM) ............... 3-65

3.9

Physical Specifications ......................................................................................................... 3-68

3.10

3.9.1

Dimensions (H x W x D) ......................................................................................................... 3-68

3.9.2

Weight ................................................................................................................................... 3-68

3.9.3

Floor Loading ......................................................................................................................... 3-68

3.9.4

Power .................................................................................................................................... 3-69

Environmental Conditions ................................................................................................... 3-73


3.10.1 Operation .............................................................................................................................. 3-73
3.10.2 Storage (Packed) ................................................................................................................... 3-73
3.10.3 Handling and Transportation ................................................................................................ 3-73

3.11

EMC ...................................................................................................................................... 3-74

3.12

Safety ................................................................................................................................... 3-74


3.12.1 Laser Safety ........................................................................................................................... 3-74
3.12.2 NEBS Compliance .................................................................................................................. 3-74

3.13

Reliability ............................................................................................................................. 3-74


3.13.1 Life ......................................................................................................................................... 3-75
3.13.2 Availability ............................................................................................................................. 3-75

3.14

Management Specifications ................................................................................................ 3-75


3.14.1 Management and Alarm Interfaces ...................................................................................... 3-75
3.14.2 Alarms and Performance....................................................................................................... 3-75

NPT-1200 Specifications .............................................................................. 4-1


4.1

Cross-Connect Specifications ................................................................................................. 4-1


4.1.1

Cross-Connect Levels............................................................................................................... 4-1

4.1.2

Cross-Connect Capacity ........................................................................................................... 4-1

4.1.3

Switching Specifications .......................................................................................................... 4-1

4.1.4

NPT-1200 Shelf Capacity ......................................................................................................... 4-2

4.2

Traffic Protection ................................................................................................................... 4-3

4.3

Redundancy ........................................................................................................................... 4-3

4.4

Tributary Protection............................................................................................................... 4-4

4.5

Synchronization ..................................................................................................................... 4-4

4.6

IEEE 1588v2 Specification ...................................................................................................... 4-4

4.7

Throughput Test - RFC2544 ................................................................................................... 4-5

4.8

Acoustic Noise........................................................................................................................ 4-5

4.9

Jitter and Wander .................................................................................................................. 4-6

ECI Telecom Ltd. Proprietary

NPT Product Line System Specifications

4.10

Contents

I/O Interfaces ......................................................................................................................... 4-6


4.10.1 2.048 Mbps (E1) ...................................................................................................................... 4-6
4.10.2 1.544 Mbps (T1) ...................................................................................................................... 4-6
4.10.3 34 Mbps (E3) ........................................................................................................................... 4-6
4.10.4 45 Mbps (DS3) ......................................................................................................................... 4-7
4.10.5 STM-1 Electrical ....................................................................................................................... 4-7
4.10.6 STM-1 Optical .......................................................................................................................... 4-7
4.10.7 STM-4 Optical .......................................................................................................................... 4-7
4.10.8 STM-16 Optical ........................................................................................................................ 4-8
4.10.9 STM-64 Optical ........................................................................................................................ 4-8

4.11

Management.......................................................................................................................... 4-8
4.11.1 Management and Alarm Interfaces ........................................................................................ 4-8
4.11.2 Management Communication Channel .................................................................................. 4-9
4.11.3 Alarms and Performance......................................................................................................... 4-9

4.12

SDH Interfaces...................................................................................................................... 4-10


4.12.1 STM-1 (155.52 Mbps 4.6 ppm) ........................................................................................... 4-10
4.12.2 STM-4 (622 Mbps 4.6 ppm) ................................................................................................ 4-11
4.12.3 STM-16 (2488 Mbps 4.6 ppm) ............................................................................................ 4-13
4.12.4 CWDM and DWDM STM-16/GbE (2488 Mbps 4.6 ppm) .................................................... 4-15
4.12.5 STM-64 (9953.28 Mbps 4.6 ppm) ....................................................................................... 4-16

4.13

Ethernet Specifications ........................................................................................................ 4-19


4.13.1 CPTS100 ................................................................................................................................. 4-21
4.13.2 CPS100................................................................................................................................... 4-24
4.13.3 DHXE_2 .................................................................................................................................. 4-26
4.13.4 DHGE_4E ............................................................................................................................... 4-26
4.13.5 DHGE_8 ................................................................................................................................. 4-27
4.13.6 DHGE_16 ............................................................................................................................... 4-27
4.13.7 DHGE_24 ............................................................................................................................... 4-28
4.13.8 DHFE_12 ................................................................................................................................ 4-28
4.13.9 DHFX_12 ................................................................................................................................ 4-28
4.13.10 DMCES1_4 ............................................................................................................................. 4-29
4.13.11 DMCE1_32 ............................................................................................................................. 4-29
4.13.12 MSE1_16 ............................................................................................................................... 4-30
4.13.13 MPoE_12G............................................................................................................................. 4-31
4.13.14 DMXE_22_L2 ......................................................................................................................... 4-33
4.13.15 DMXE_48_L2 ......................................................................................................................... 4-35
4.13.16 DMGE_2_L2 ........................................................................................................................... 4-37

ECI Telecom Ltd. Proprietary

vi

NPT Product Line System Specifications

Contents

4.13.17 DMGE_4_L2 ........................................................................................................................... 4-38


4.13.18 DMGE_8_L2 ........................................................................................................................... 4-39
4.13.19 DMFE_4_L2/DMFX_4_L2 ...................................................................................................... 4-41
4.13.20 MPS_2G_8F ........................................................................................................................... 4-42
4.13.21 DMFE_4_L1/DMFX_4_L1 ...................................................................................................... 4-43
4.13.22 DMGE_4_L1 ........................................................................................................................... 4-43
4.13.23 Ethernet Transceivers ........................................................................................................... 4-44
4.13.24 CWDM and DWDM STM-16/GbE (2488 Mbps 4.6 ppm) .................................................... 4-45
4.13.25 Ethernet SFP+ Transceivers ................................................................................................... 4-46
4.13.26 CSFP Client Transceivers........................................................................................................ 4-49
4.13.27 Electrical GbE SFP (ETGbE) .................................................................................................... 4-50

4.14

MXP10 Base Card Configurations ........................................................................................ 4-50


4.14.1 MXP10 Base Card Modules and Transceivers ....................................................................... 4-51

4.15

Optical Amplifier Modules ................................................................................................... 4-52

4.16

Dispersion Compensation Modules ..................................................................................... 4-52

4.17

EM_10E Specifications ......................................................................................................... 4-53

4.18

SM_10E Specifications ......................................................................................................... 4-54


4.18.1 SM_10E Total Capacity .......................................................................................................... 4-54
4.18.2 SM_10E DXC1/0 XC Capacity ................................................................................................. 4-54
4.18.3 EM_10E Total Capacity .......................................................................................................... 4-55
4.18.4 EM_10E DXC1/0 XC Capacity................................................................................................. 4-55
4.18.5 Timing .................................................................................................................................... 4-55
4.18.6 FXO/FXS Interface ................................................................................................................. 4-56
4.18.7 Ringer Characteristics............................................................................................................ 4-57
4.18.8 2 Wire/4 Wire/6 Wire and E&M Interface ............................................................................ 4-57
4.18.9 Codir_4E Interface ................................................................................................................. 4-57
4.18.10 OMNI_E Interface .................................................................................................................. 4-58
4.18.11 V.24 Interface ........................................................................................................................ 4-58
4.18.12 V.35 Interface ........................................................................................................................ 4-58
4.18.13 V.36 Interface ........................................................................................................................ 4-58
4.18.14 V.11 Interface ........................................................................................................................ 4-59
4.18.15 RS-422/449 Interface ............................................................................................................ 4-59
4.18.16 SM_C37.94 Interface ............................................................................................................. 4-59
4.18.17 SM_C37.94S Specifications ................................................................................................... 4-60
4.18.18 SM_EoP ................................................................................................................................. 4-61

4.19

Physical Specifications ......................................................................................................... 4-61


4.19.1 Dimensions (H x W x D) ......................................................................................................... 4-61

ECI Telecom Ltd. Proprietary

vii

NPT Product Line System Specifications

Contents

4.19.2 Weight ................................................................................................................................... 4-62


4.19.3 Power .................................................................................................................................... 4-62
4.19.4 INF-1200 ................................................................................................................................ 4-62
4.19.5 INF_E2U ................................................................................................................................. 4-63
4.19.6 AC_PS-E2U ............................................................................................................................. 4-63
4.19.7 NPT-1200 Power Consumption ............................................................................................. 4-63
4.19.8 (NPT-1200) Environmental Conditions .................................................................................. 4-67
4.19.9 EMC ....................................................................................................................................... 4-68
4.19.10 Safety..................................................................................................................................... 4-68
4.19.11 Laser Safety ........................................................................................................................... 4-68
4.19.12 Reliability ............................................................................................................................... 4-68

NPT-1021 Specifications .............................................................................. 5-1


5.1

NPT-1021 Shelf Capacity ........................................................................................................ 5-1

5.2

Cross-Connect Specifications ................................................................................................. 5-1

5.3

Switching Specifications......................................................................................................... 5-1

5.4

Redundancy ........................................................................................................................... 5-1

5.5

Synchronization ..................................................................................................................... 5-2

5.6

IEEE 1588v2 Specification ...................................................................................................... 5-2

5.7

Throughput Test - RFC2544 ................................................................................................... 5-3

5.8

Acoustic Noise........................................................................................................................ 5-3

5.9

Traffic Protection ................................................................................................................... 5-3

5.10

Jitter and Wander .................................................................................................................. 5-3

5.11

I/O Interfaces ......................................................................................................................... 5-4


5.11.1 2.048 Mbps (E1) ...................................................................................................................... 5-4
5.11.2 1.544 Mbps (T1) ...................................................................................................................... 5-4
5.11.3 STM-1 Electrical ....................................................................................................................... 5-4
5.11.4 STM-1 Optical .......................................................................................................................... 5-5
5.11.5 STM-4 Optical .......................................................................................................................... 5-5

5.12

Management.......................................................................................................................... 5-5
5.12.1 Management and Alarm Interfaces ........................................................................................ 5-5
5.12.2 Alarms and Performance......................................................................................................... 5-6

5.13

SDH Interfaces........................................................................................................................ 5-6


5.13.1 STM-1 (155.52 Mbps 4.6 ppm) ............................................................................................. 5-6
5.13.2 STM-4 (622 Mbps 4.6 ppm) .................................................................................................. 5-8

5.14

Ethernet Specifications ........................................................................................................ 5-10


5.14.1 NPT-1021 (Packet Switch without CPS50) ............................................................................. 5-10

ECI Telecom Ltd. Proprietary

viii

NPT Product Line System Specifications

Contents

5.14.2 DHGE_4E ............................................................................................................................... 5-12


5.14.3 DHGE_8 ................................................................................................................................. 5-12
5.14.4 DMCES1_4 ............................................................................................................................. 5-13
5.14.5 MSE1_16 ............................................................................................................................... 5-14
5.14.6 Ethernet Transceivers ........................................................................................................... 5-14
5.14.7 CWDM and DWDM STM-16/GbE (2488 Mbps 4.6 ppm) .................................................... 5-16
5.14.8 Ethernet SFP+ Transceivers ................................................................................................... 5-17
5.14.9 CSFP Client Transceivers........................................................................................................ 5-19
5.14.10 Electrical GbE SFP (ETGbE) .................................................................................................... 5-20

5.15

Optical Amplifier Modules ................................................................................................... 5-20

5.16

Dispersion Compensation Modules ..................................................................................... 5-21

5.17

MXP10 Base Card Configurations ........................................................................................ 5-22


5.17.1 MXP10 Base Card Modules and Transceivers ....................................................................... 5-22

5.18

EM_10E Specifications ......................................................................................................... 5-23


5.18.1 EM_10E Total Capacity .......................................................................................................... 5-24
5.18.2 EM_10E DXC1/0 XC Capacity................................................................................................. 5-24
5.18.3 Timing .................................................................................................................................... 5-24
5.18.4 FXO/FXS Interface ................................................................................................................. 5-25
5.18.5 Ringer Characteristics ............................................................................................................ 5-26
5.18.6 2 Wire/4 Wire/6 Wire and E&M Interface ............................................................................ 5-26
5.18.7 Codir_4E Interface ................................................................................................................. 5-26
5.18.8 OMNI_E Interface .................................................................................................................. 5-27
5.18.9 V.24 Interface ........................................................................................................................ 5-27
5.18.10 V.35 Interface ........................................................................................................................ 5-27
5.18.11 V.36 Interface ........................................................................................................................ 5-27
5.18.12 RS-422/449 Interface ............................................................................................................ 5-28
5.18.13 SM_C37.94 Interface ............................................................................................................. 5-28
5.18.14 SM_C37.94S Specifications ................................................................................................... 5-28

5.19

Physical Specifications ......................................................................................................... 5-29


5.19.1 Dimensions (H x W x D) ......................................................................................................... 5-30
5.19.2 Weight ................................................................................................................................... 5-30
5.19.3 Power .................................................................................................................................... 5-30
5.19.4 AC_PS-B1U Module ............................................................................................................... 5-31
5.19.5 AC_PS-E2U ............................................................................................................................. 5-31
5.19.6 INF-B1U Module .................................................................................................................... 5-31
5.19.7 NPT-1021 Power Consumption ............................................................................................. 5-31
5.19.8 Environmental Conditions ..................................................................................................... 5-33

ECI Telecom Ltd. Proprietary

ix

NPT Product Line System Specifications

Contents

5.19.9 EMC ....................................................................................................................................... 5-34


5.19.10 Safety..................................................................................................................................... 5-34
5.19.11 Laser Safety ........................................................................................................................... 5-35
5.19.12 Reliability ............................................................................................................................... 5-35

NPT-1020 Specifications .............................................................................. 6-1


6.1

NPT-1020 Shelf Capacity ........................................................................................................ 6-1

6.2

Cross-Connect Specifications ................................................................................................. 6-1


6.2.1

Cross-Connect Levels............................................................................................................... 6-1

6.2.2

Cross-Connect Capacity ........................................................................................................... 6-1

6.3

Switching Specifications......................................................................................................... 6-1

6.4

Redundancy ........................................................................................................................... 6-2

6.5

Synchronization ..................................................................................................................... 6-2

6.6

IEEE 1588v2 Specification ...................................................................................................... 6-2

6.7

Throughput Test - RFC2544 ................................................................................................... 6-3

6.8

Acoustic Noise........................................................................................................................ 6-3

6.9

Traffic Protection ................................................................................................................... 6-3

6.10

Jitter and Wander .................................................................................................................. 6-4

6.11

I/O Interfaces ......................................................................................................................... 6-4


6.11.1 2.048 Mbps (E1) ...................................................................................................................... 6-4
6.11.2 1.544 Mbps (T1) ...................................................................................................................... 6-4
6.11.3 34 Mbps (E3) ........................................................................................................................... 6-5
6.11.4 45 Mbps (DS3) ......................................................................................................................... 6-5
6.11.5 STM-1 Electrical ....................................................................................................................... 6-5
6.11.6 STM-1 Optical .......................................................................................................................... 6-5
6.11.7 STM-4 Optical .......................................................................................................................... 6-6

6.12

Management.......................................................................................................................... 6-6
6.12.1 Management and Alarm Interfaces ........................................................................................ 6-6
6.12.2 Management Communication Channel .................................................................................. 6-6
6.12.3 Alarms and Performance......................................................................................................... 6-7

6.13

SDH Interfaces........................................................................................................................ 6-8


6.13.1 STM-1 (155.52 Mbps 4.6 ppm) ............................................................................................. 6-8
6.13.2 STM-4 (622 Mbps 4.6 ppm) ................................................................................................ 6-10

6.14

Ethernet Specifications ........................................................................................................ 6-12


6.14.1 NPT-1020 (Packet Switch without CPS50) ............................................................................. 6-12
6.14.2 NPT-1020 (with Packet Switch CPS50) .................................................................................. 6-14
6.14.3 DHGE_4E ............................................................................................................................... 6-16

ECI Telecom Ltd. Proprietary

NPT Product Line System Specifications

Contents

6.14.4 DHGE_8 ................................................................................................................................. 6-16


6.14.5 DMCES1_4 ............................................................................................................................. 6-16
6.14.6 DMCE1_32 ............................................................................................................................. 6-17
6.14.7 MSE1_16 ............................................................................................................................... 6-18
6.14.8 MPoE_12G............................................................................................................................. 6-18
6.14.9 Ethernet Transceivers ........................................................................................................... 6-20
6.14.10 CWDM and DWDM STM-16/GbE (2488 Mbps 4.6 ppm) .................................................... 6-22
6.14.11 Ethernet SFP+ Transceivers ................................................................................................... 6-23
6.14.12 CSFP Client Transceivers........................................................................................................ 6-26
6.14.13 Electrical GbE SFP (ETGbE) .................................................................................................... 6-27

6.15

Optical Amplifier Modules ................................................................................................... 6-27

6.16

Dispersion Compensation Modules ..................................................................................... 6-28

6.17

MXP10 Base Card Configurations ........................................................................................ 6-28


6.17.1 MXP10 Base Card Modules and Transceivers ....................................................................... 6-28

6.18

EM_10E Specifications ......................................................................................................... 6-29

6.19

SM_10E Specifications ......................................................................................................... 6-30


6.19.1 SM_10E Total Capacity .......................................................................................................... 6-30
6.19.2 SM_10E DXC1/0 XC Capacity ................................................................................................. 6-31
6.19.3 EM_10E Total Capacity .......................................................................................................... 6-31
6.19.4 EM_10E DXC1/0 XC Capacity................................................................................................. 6-31
6.19.5 Timing .................................................................................................................................... 6-31
6.19.6 FXO/FXS Interface ................................................................................................................. 6-32
6.19.7 Ringer Characteristics............................................................................................................ 6-33
6.19.8 2 Wire/4 Wire/6 Wire and E&M Interface ............................................................................ 6-33
6.19.9 Codir_4E Interface ................................................................................................................. 6-33
6.19.10 OMNI_E Interface .................................................................................................................. 6-34
6.19.11 V.24 Interface ........................................................................................................................ 6-34
6.19.12 V.35 Interface ........................................................................................................................ 6-34
6.19.13 V.36 Interface ........................................................................................................................ 6-35
6.19.14 V.11 Interface ........................................................................................................................ 6-35
6.19.15 RS-422/449 Interface ............................................................................................................ 6-35
6.19.16 SM_C37.94 Interface ............................................................................................................. 6-36
6.19.17 SM_C37.94S Specifications ................................................................................................... 6-36
6.19.18 SM_EoP ................................................................................................................................. 6-37

6.20

Physical Specifications ......................................................................................................... 6-38


6.20.1 Dimensions (H x W x D) ......................................................................................................... 6-38
6.20.2 Weight ................................................................................................................................... 6-38

ECI Telecom Ltd. Proprietary

xi

NPT Product Line System Specifications

Contents

6.20.3 Power .................................................................................................................................... 6-38


6.20.4 AC_PS-B1U Module ............................................................................................................... 6-39
6.20.5 AC_PS-E2U ............................................................................................................................. 6-39
6.20.6 INF-B1U Module .................................................................................................................... 6-39
6.20.7 INF-B1U-D Module ................................................................................................................ 6-39
6.20.8 NPT-1020 Power Consumption ............................................................................................. 6-40
6.20.9 Environmental Conditions ..................................................................................................... 6-42
6.20.10 EMC ....................................................................................................................................... 6-43
6.20.11 Safety..................................................................................................................................... 6-43
6.20.12 Laser Safety ........................................................................................................................... 6-43
6.20.13 Reliability ............................................................................................................................... 6-44

NPT-1010 Specifications .............................................................................. 7-1


7.1

NPT-1010 Shelf Capacity ........................................................................................................ 7-1

7.2

Cross-Connect Specifications ................................................................................................. 7-1

7.3

Switching Specifications......................................................................................................... 7-1

7.4

Redundancy ........................................................................................................................... 7-1

7.5

Synchronization ..................................................................................................................... 7-1

7.6

Throughput Test - RFC2544 ................................................................................................... 7-2

7.7

Traffic Protection ................................................................................................................... 7-2

7.8

Jitter and Wander .................................................................................................................. 7-2

7.9

I/O Interfaces ......................................................................................................................... 7-2

7.10

7.9.1

2.048 Mbps (E1) ...................................................................................................................... 7-3

7.9.2

1.544 Mbps (T1) ...................................................................................................................... 7-3

Management.......................................................................................................................... 7-3
7.10.1 Management and Alarm Interfaces ........................................................................................ 7-3
7.10.2 Management Communication Channel .................................................................................. 7-4
7.10.3 Alarms and Performance......................................................................................................... 7-4

7.11

Ethernet Specifications .......................................................................................................... 7-4


7.11.1 NPT-1010 ................................................................................................................................. 7-5
7.11.2 TMSE1_8 ................................................................................................................................. 7-7
7.11.3 TM10 (1588v2 Specifications) ................................................................................................. 7-7
7.11.4 Ethernet Transceivers ............................................................................................................. 7-8
7.11.5 CWDM and DWDM STM-16/GbE (2488 Mbps 4.6 ppm) ...................................................... 7-9
7.11.6 Electrical GbE SFP (ETGbE) .................................................................................................... 7-10

7.12

Physical Specifications ......................................................................................................... 7-10

7.13

Dimensions (H x W x D)........................................................................................................ 7-10

ECI Telecom Ltd. Proprietary

xii

NPT Product Line System Specifications

Contents

7.14

INF_E2U ............................................................................................................................... 7-11

7.15

Weight.................................................................................................................................. 7-11

7.16

Power ................................................................................................................................... 7-11

7.17

NPT-1010 Power Consumption............................................................................................ 7-11

7.18

Environmental Conditions ................................................................................................... 7-12


7.18.1 Operation .............................................................................................................................. 7-12
7.18.2 Storage (Packed) ................................................................................................................... 7-12
7.18.3 Handling and Transportation ................................................................................................ 7-12

7.19

EMC ...................................................................................................................................... 7-13

7.20

Safety ................................................................................................................................... 7-13

7.21

Laser Safety .......................................................................................................................... 7-13

7.22

Reliability ............................................................................................................................. 7-13


7.22.1 Life ......................................................................................................................................... 7-13
7.22.2 Availability ............................................................................................................................. 7-13

Standards and References ........................................................................... 8-1


8.1

Broadband Forum .................................................................................................................. 8-1

8.2

Environmental Standards ...................................................................................................... 8-1

8.3

ETSI: European Telecommunications Standards Institute ..................................................... 8-1

8.4

IEC: International Electrotechnical Commission .................................................................... 8-3

8.5

IEEE: Institute of Electrical and Electronic Engineers ............................................................ 8-4

8.6

IETF: Internet Engineering Task Force ................................................................................... 8-4

8.7

ISO: International Organization for Standardization ............................................................. 8-8

8.8

ITU-T: International Telecommunication Union .................................................................... 8-8

8.9

MEF: Metro Ethernet Forum ............................................................................................... 8-12

8.10

NIST: National Institute of Standards and Technology ........................................................ 8-12

8.11

North American Standards .................................................................................................. 8-13

8.12

OMG: Object Management Group ...................................................................................... 8-14

8.13

TMF: TeleManagement Forum ............................................................................................ 8-14

8.14

Web Protocol Standards ...................................................................................................... 8-14

ECI Telecom Ltd. Proprietary

xiii

List of Figures

Figure 2-1: Dual matrix approach ................................................................................................................... 2-1


Figure 2-2: NPT packet and TDM capabilities ................................................................................................. 2-2

ECI Telecom Ltd. Proprietary

xiv

List of Tables

Table 3-1: STM-1 transceivers ........................................................................................................................ 3-7


Table 3-2: STM-1 bidirectional transceivers ................................................................................................... 3-7
Table 3-3: STM-4 transceivers ........................................................................................................................ 3-9
Table 3-4: STM-4 bidirectional transceivers ................................................................................................. 3-10
Table 3-5: STM-16 transceivers .................................................................................................................... 3-12
Table 3-6: STM-16 bidirectional transceivers ............................................................................................... 3-13
Table 4-1: NPT-1200 TDM capacity per I/O slot ............................................................................................. 4-2
Table 4-2: NPT-1200 packet capacity per I/O slot .......................................................................................... 4-2
Table 4-3: STM-1 interface ........................................................................................................................... 4-10
Table 4-4: STM-1 bidirectional transceivers ................................................................................................. 4-11
Table 4-5: STM-4 transceivers ...................................................................................................................... 4-11
Table 4-6: STM-4 bidirectional transceivers ................................................................................................. 4-12
Table 4-7: STM-16 transceivers .................................................................................................................... 4-13
Table 4-8: STM-16 bidirectional transceivers ............................................................................................... 4-14
Table 4-9: CWDM and DWDM STM-16/GbE interfaces ............................................................................... 4-15
Table 4-10: STM-64 non-colored interface (XFPs)........................................................................................ 4-16
Table 4-11: STM-64 colored interface (XFPs) ............................................................................................... 4-17
Table 4-12: STM-64 bidirectional transceivers (XFPs) .................................................................................. 4-18
Table 4-13: TDM Ethernet Layer 1 cards ...................................................................................................... 4-19
Table 4-14: TDM Ethernet Layer 2/MPLS-TP cards ...................................................................................... 4-20
Table 4-15: Hybrid Ethernet Layer 2/MPLS-TP cards ................................................................................... 4-21
Table 4-16: GbE/FX client transceivers ......................................................................................................... 4-44
Table 4-17: GbE bidirectional client transceivers ......................................................................................... 4-45
Table 4-18: CWDM and DWDM STM-16/GbE transceivers .......................................................................... 4-45
Table 4-19: SFP+ client transceivers ............................................................................................................. 4-46
Table 4-20: SFP+ bidirectional client transceivers ........................................................................................ 4-47
Table 4-21: SFP+ C/DWDM transceivers ...................................................................................................... 4-48
Table 4-22: CSFP client transceivers ............................................................................................................. 4-49
Table 4-23: Optical amplifier specifications ................................................................................................. 4-52
Table 4-24: OM_DCMxx specifications ......................................................................................................... 4-53
Table 4-25: FXO and FXS specifications ........................................................................................................ 4-56
Table 4-26: Power Consumption .................................................................................................................. 4-63
Table 4-27 Power Dissipation ....................................................................................................................... 4-67
Table 5-1: STM-1 interface ............................................................................................................................. 5-6
Table 5-2: STM-1 bidirectional transceivers ................................................................................................... 5-7
Table 5-3: STM-4 transceivers ........................................................................................................................ 5-8
Table 5-4: STM-4 bidirectional transceivers ................................................................................................... 5-9
Table 5-5: GbE/FX client transceivers ........................................................................................................... 5-14
Table 5-6: GbE bidirectional client transceivers ........................................................................................... 5-15
Table 5-7: CWDM and DWDM STM-16/GbE transceivers ............................................................................ 5-16
ECI Telecom Ltd. Proprietary

xv

NPT Product Line System Specifications

List of Tables

Table 5-8: SFP+ client transceivers ............................................................................................................... 5-17


Table 5-9: SFP+ bidirectional client transceivers .......................................................................................... 5-18
Table 5-10: SFP+ C/DWDM transceivers ...................................................................................................... 5-18
Table 5-11: CSFP client transceivers ............................................................................................................. 5-19
Table 5-12: Optical amplifier specifications ................................................................................................. 5-21
Table 5-13: OM_DCMxx specifications ......................................................................................................... 5-22
Table 5-14: FXO and FXS specifications ........................................................................................................ 5-25
Table 6-1: STM-1 interface ............................................................................................................................. 6-8
Table 6-2: STM-1 bidirectional transceivers ................................................................................................... 6-9
Table 6-3: STM-4 transceivers ...................................................................................................................... 6-10
Table 6-4: STM-4 bidirectional transceivers ................................................................................................. 6-11
Table 6-5: GbE/FX client transceivers ........................................................................................................... 6-20
Table 6-6: GbE bidirectional client transceivers ........................................................................................... 6-21
Table 6-7: CWDM and DWDM STM-16/GbE transceivers ............................................................................ 6-22
Table 6-8: SFP+ client transceivers ............................................................................................................... 6-23
Table 6-9: SFP+ bidirectional client transceivers .......................................................................................... 6-24
Table 6-10: SFP+ C/DWDM transceivers ...................................................................................................... 6-25
Table 6-11: CSFP client transceivers ............................................................................................................. 6-26
Table 6-12: Optical amplifier specifications ................................................................................................. 6-27
Table 6-13: OM_DCMxx specifications ......................................................................................................... 6-28
Table 6-14: FXO and FXS specifications ........................................................................................................ 6-32
Table 7-1: GbE/FX client transceivers ............................................................................................................. 7-8
Table 7-2: GbE bidirectional client transceivers ............................................................................................. 7-8
Table 7-3: CWDM and DWDM STM-16/GbE transceivers .............................................................................. 7-9

ECI Telecom Ltd. Proprietary

xvi

About This Manual

The NPT System Specifications describes the technical specifications of the platforms, cards, modules, and
transceivers included in each platform.

1.1

Intended Audience

This manual is intended for field engineers, network designers, and other qualified service personnel
responsible for designing, installing, and maintaining the NPT products and its accessories.

Parent Topic
1 About This Manual

1.2

Document Organization

This System Specifications contains the following information:

NPT principals

NPT-1600/NPT-1600C specifications

NPT-1200 specifications

NPT-1020 specifications

NPT-1010 specifications

Standards and references

Parent Topic
1 About This Manual

1.3

Notes and Warnings

When applicable, this guide uses the following notes and warnings:

NOTE:

clarifying information, specific instructions, commentary, sidelights, or interesting


points of information.

CAUTION:

failure to follow directions could result in damage to equipment or loss of


information.

WARNING: failure to follow directions could result in bodily harm or loss of life.

ECI Telecom Ltd. Proprietary

1-1

NPT Product Line System Specifications

About This Manual

LASER WARNING:

how to avoid personal injury. All personnel involved in equipment


installation, operation, and maintenance must be aware that laser radiation is invisible.
Therefore, although protective devices generally prevent direct exposure to the beam,
personnel must strictly observe the applicable safety precautions and, in particular, must
avoid staring into optical connectors, either directly or using optical instruments.

ESD: information on how to avoid discharge of static electricity and subsequent damage to
the unit.

TIP: helpful information and handy hints that can make your task easier.

IMPORTANT: essential information to which you must pay attention.


Parent Topic
1 About This Manual

1.4

Related Documentation

The following publications may be of assistance to you in the installation and commissioning processes of
NPT:

NPT General Description

NPT Reference Manual

NPT-1600 Installation and Maintenance Manual

NPT-1200 Installation and Maintenance Manual

NPT-1020 Installation and Maintenance Manual

NPT-1010 Installation and Maintenance Manual

EMS-APT Documentation Suite

LCT-APT Documentation Suite

EMS-MPT Documentation Suite

LCT-MPT Documentation Suite

LightSoft Documentation Suite

Parent Topic
1 About This Manual

ECI Telecom Ltd. Proprietary

1-2

NPT Product Line System Specifications

1.5

About This Manual

How to Obtain ECI Technical Documentation

To obtain technical documentation related to any ECI product, contact:


ECI Telecom Ltd.
ECI Documentation Group
30 Hasivim St.
Petach Tikva 4959388 Israel
Fax: +972-3-9268060
Email: techdoc.feedback@ecitele.com

Parent Topic
1 About This Manual

1.6

Technical Assistance

The configuration, installation, and operation of NPT series and its operation in a network are highly
specialized processes. Due to the different nature of each installation, some planning aspects might not be
covered in this manual.
If you have questions or concerns about your network design or if you require installation personnel to
perform the actual installation process, ECI maintains a staff of design engineers and highly trained field
service personnel. The services of this group are available to customers at any time.
To obtain design assistance or a network installation plan from ECI's Customer Support team, contact your
ECI sales representative. With any support related issues, technical or logistic, please contact the ECI
Customer Support center at your location. If you are not familiar with that location, or contact our
Customer Support Center action line at:
Telephone

+972-3-9266000

Telefax

+972-3-9266370

Email

on.support@ecitele.com

Parent Topic
1 About This Manual

ECI Telecom Ltd. Proprietary

1-3

Overview

2.1

All-Native Transport

All-Native transport is ECI's architecture to support PTN. All-Native transport is based on native handling of
both packet and TDM by the same network element (NE). The Ethernet traffic is processed natively and
delivered over Ethernet interfaces without traversing the TDM component of the dual matrix. The TDM
traffic is cross connected via the TDM HO/LO component of the dual matrix. Keeping the TDM and Ethernet
switching fabrics independent enables complete separation between the different traffic types, preventing
one type of traffic load from adversely affecting the other.
Figure 2-1: Dual matrix approach

The All-Native approach offers the most cost-efficient traffic handling in a mixed TDM and packet
environment while supporting all the necessary PTN attributes. Using native handling allows a gradual and
controlled shift from TDM-based infrastructure to packet-based infrastructure, while also minimizing risk by
eliminating complex and costly encapsulation schemes to carry Ethernet over TDM or TDM over Ethernet.

Parent Topic
2 Overview

ECI Telecom Ltd. Proprietary

2-1

NPT Product Line System Specifications

2.2

Overview

Introducing the NPT Product Line

NPT is a family of future-proof, carrier-grade converged multiservice packet optical transport platforms,
optimized for metro packet transport networks. NPT offers a unique convergence of Carrier Ethernet,
MPLS-TP, SDH/SONET, TDM, WDM, OTN, and ROADM on a single platform. NPT provides carrier-class
packet transport, combining the gold standard of transport network reliability and ease of management
with packet efficiency. In addition to the All-Native support for pure Ethernet and TDM traffic, NPT
supports the full range of traffic combinations, including Ethernet/MPLS-TP over TDM (EoS/MoT) and TDM
over Ethernet (CES), providing maximum flexibility for the widest range of network scenarios.
Figure 2-2: NPT packet and TDM capabilities

The NPT product line supports a full set of Carrier Ethernet services and features including QoS, protection,
OAM, and synchronization to assure undisrupted service delivery. Integrated WDM, OTN, and ROADM
allow seamless integration with next generation optical networks.
By supporting the most advanced carrier class Ethernet-based services (L1, L2, MPLS) and with MEF
CE2.0-based certification, the NPT is well positioned to deliver cellular backhaul transition/migration plans
from TDM to Ethernet as well as for new build outs of LTE and 4G networks, support for full triple play
services for residential NGN applications, and utility company transitions to packet, CoC, and business
applications. The NPT family of products is managed by the LightSoft NMS.
The NPT's value propositions include:

Efficiency through ultimate flexibility

Choice of packet and TDM handling options - native packet, native TDM, TDM over packet, and
packet over TDM

Unique build-as-you-grow architecture

Converged packet, optics, and TDM

Simplicity through MPLS-TP

ECI Telecom Ltd. Proprietary

2-2

NPT Product Line System Specifications

Simple, easy-to-manage NEs

Scalable solution for the metro

Transport grade QoS, OAM, and synchronization

Overview

Full control through transport management

Well proven, centralized, GUI-based NMS

Unified multi-layer control (packet, optics, TDM)

Easy Data Management Suite (EDMS)

The NPT keeps TCO to a minimum throughout the network life cycle by providing an affordable, scalable,
and easy to manage PTN.

Parent Topic
2 Overview

ECI Telecom Ltd. Proprietary

2-3

NPT-1600/NPT-1600C Specifications

3.1

Electrical Interface Connection Modules

Electrical I/O cards are assigned an interface connection module. This module serves as the I/O card
electrical line transceiver and is connected to the I/O cards via the NPT backplane. For example, when
eleven PIO2_84 I/O cards are installed in the NPT-1600 cards cage, eleven M2_84xx connection modules
should be installed in the modules cage. In this case, if hardware protection is required, one PIO2_84 I/O
card can be configured as the protection card, and the corresponding protection connection module
M2_84P I/O is installed in the appropriate slot of the NPT-1600 modules cage.
I/O slot 12 is always configured as a pure optical slot without a modules cage module.

Parent Topic
3 NPT-1600/NPT-1600C Specifications

3.1.1 Connection Module Data for Electrical I/O Cards


I/O card

Bitrate (Mbps)

I/O ports

Module

Interface type

Function/Description

SIO1&4

155

16

M1_16BT

SDH electrical

Connection module

M1_16DIN

SDH electrical

Connection module

M1_16P

Connection module with protection

M1_8BT

SDH electrical

Connection module

M1_8DIN

SDH electrical

Connection module

M345_16BT

PDH

Connection module

M345_16DI

PDH

Connection module

M345_16P

PDH

Connection module with protection

M345_8BT

PDH

Connection module

M345_8DI

PDH

Connection module

M345_8BN

PDH

Connection module

M2_84B

PDH

Balanced (120 ) connection module

M2_84BR

PDH

Low-cost, balanced (120 ) connection


module, without protection

M2_84U

PDH

Unbalanced (75 ) connection module

M2_84UR

PDH

Low-cost, unbalanced (75 ) connection


module, without protection

M2_84P1

PDH

Connection module with protection

PIO345

34/45/52

16

PIO2_84

2.048

84

Protection module M2_84P can be used to protect PIO2_84.

ECI Telecom Ltd. Proprietary

3-1

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

I/O card

Bitrate (Mbps)

I/O ports

Module

Interface type

Function/Description

SIO1&4

155

16

M1_16BT

SDH electrical

Connection module

PIO2_21

2.048

21

M2_21B

PDH

Balanced (120 ) connection module

M2_21U

PDH

Unbalanced (75 ) connection module

PDH

Connection module with protection

M2_84P

Parent Topic
3.1 Electrical Interface Connection Modules

3.1.2 Optical Transceivers for I/O Cards


Optical I/O cards use a slide-in optical transceiver, which is directly plugged into the card for signal
interfacing.
I/O card

Optical module

Connector type

I/O ports per


optical module

Modules per I/O


card

Ports per I/O card

SIO1&4

OM01_4

LC

16 x STM-1/OC-3

OM04_1

SC/LC

4 x STM-4/OC-12

SIO16

OM16_1

SC/LC

2 x STM-16/OC-48

SIO64

OM64_1

LC

1 x STM-64/OC-192/OTU2

SIO164

OMSC16_4

LC

4 x STM-16/OC-48/OTU1

OMTX10_EF

LC

1 x STM-64/OC-192/OTU2

OMTX10

LC

1 x STM-64/OC-192/OTU2

OMTX10_S

LC

1 x STM-64/OC-192/OTU2

Parent Topic
3.1 Electrical Interface Connection Modules

Protection module M2_84P can be used to protect PIO2_84.

ECI Telecom Ltd. Proprietary

3-2

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.1.3 Optical SFP Transceivers for I/O Cards


New optical I/O cards use a high flexibility concept, consisting of slide-in optical modules. Each module has
slots for up to four SFP transceivers.
I/O card

Optical module

Connector type

I/O ports per


optical module

Modules per I/O


card

Ports per I/O card

SIO1&4

OMS01_43

LC

1 to 4

16 x STM-1/OC-3

OMS04_14

LC

4 x STM-4/OC-12

SIO16

OM16_1SFP5

LC

2 x STM-16/OC-48/OTU1

SIO164

OMSC16_4

LC

4 x STM-16/OC-96/OTU2

Parent Topic
3.1 Electrical Interface Connection Modules

3.2

PDH and SDH Interface Specifications

The following sections provide a description of PDH and SDH interface specifications.

Parent Topic
3 NPT-1600/NPT-1600C Specifications

3.2.1 2 Mbps (E1)


Physical level

G.703, Paragraph 6

Frame

Unframed, G.704, I.431 (ISDN)

Line code

HDB3

Line impedance

120 W balanced/75 W unbalanced

Parent Topic
3.2 PDH and SDH Interface Specifications

SFP SDH transceivers starting system version V 5.0, DWDM SFPs release V6.2.

SFP SDH transceivers starting system version V 5.0, DWDM SFPs release V6.2.

SFP SDH transceivers starting system version V 5.0, DWDM SFPs release V6.2.

ECI Telecom Ltd. Proprietary

3-3

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.2.2 34 Mbps (E3)


Physical level

G.703, Paragraph 8

Frame

G.751

Line code

HDB3

Line impedance 75 W unbalanced

Parent Topic

3.2 PDH and SDH Interface Specifications

3.2.3 45 Mbps (DS-3)


Physical level

G.703, Paragraph 5

Frame

G.751

Line code

B3ZS

Line impedance

75 W unbalanced

Parent Topic
3.2 PDH and SDH Interface Specifications

3.2.4 52 Mpbs (STS-1)


Physical level

GR-253-CORE

Frame

G.253

Line code

CMI

Line impedance

75 W unbalanced

Parent Topic
3.2 PDH and SDH Interface Specifications

3.2.5 STM-1 Electrical


Physical level

G.703, Paragraph 12

Frame

G.707

Line code

CMI

Parent Topic
3.2 PDH and SDH Interface Specifications

ECI Telecom Ltd. Proprietary

3-4

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.2.6 STM-1/OC-3 Optical


Physical level

G.957, Table 2

Wavelength

1310 nm, 1550 nm

Short-haul, long-haul bitrate 155.52 Mbps 4.6 ppm

Parent Topic
3.2 PDH and SDH Interface Specifications

3.2.7 STM-4/OC-12 Optical


Physical level

G.957, Table 3

Wavelength

1310 nm, 1550 nm

Short-haul, long-haul, very long-haul, ultra


long-haul bitrate

622 Mbps 4.6 ppm

Parent Topic
3.2 PDH and SDH Interface Specifications

3.2.8 STM-16/OC-48 Optical


Physical level

G.957, Table 4

Wavelength

1310 nm, 1550 nm

Short-haul, long-haul, very long-haul, ultra


2488.32 Mbps 4.6 ppm
long-haul, DWDM (G.694.1 and G.957) bitrate

Parent Topic
3.2 PDH and SDH Interface Specifications

3.2.9 STM-64/OC-192 Optical


Physical level

G.691, G.957, Table 5

Wavelength

1310 nm, 1550 nm

Short-haul, long-haul, very long-haul,


DWDM (G.694.1) bitrate

9953.28 Mbps 4.6 ppm

Parent Topic
3.2 PDH and SDH Interface Specifications

ECI Telecom Ltd. Proprietary

3-5

NPT Product Line System Specifications

3.3

NPT-1600/NPT-1600C Specifications

SDH Interfaces

This section describes the specifications for the SDH interfaces.

Parent Topic
3 NPT-1600/NPT-1600C Specifications

3.3.1 STM-1/OC-3 (155.52 Mbps 4.6 ppm) I/O Modules


OM01_4I36

CARD NAME

OM01_4S3

OM01_4L5

S-1.1

L-1.2

1270-1380

1261-1360

1480-1580

Source type

MLM

SLM

SLM

Max. RMS width (nm)

7.7

Max. -20 dB width (nm)

Min. side mode suppression ratio (dB)

> 30

Min. mean launched power (dBm)

-19

-15

-5

Max. mean launched power (dBm)

-14

-8

Min. extinction ratio (dB)

10

8.2

10

Min. sensitivity (BER of 1*10-12) EOL (dBm)

-30

-28

-34

Min. overload (dBm)

-8

-10

Max. receiver reflectance (dB)

-25

Max. dispersion (ps/nm)

96

Min. optical return loss of cable (dB)

-20

Max. discrete reflectance (dB)

-25

Max. optical path penalty (dB)

APPLICATION CODE

Operating wavelength (nm)


TRANSMITTER

RECEIVER

Parent Topic
3.3 SDH Interfaces

MLM transceiver for 2 km with multimode fibers.

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

3-6

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.3.2 STM-1/OC-3 SFP Optical Transceivers for OMS01_4


Table 3-1: STM-1 transceivers
SFP TRANSCEIVER NAME8

OTR1_S3

OTR1_L3

OTR1_L5

APPLICATION CODE9

S-1.1

L-1.1

L-1.2

Operating wavelength (nm)

1261-1360

1263-1360

Source type

MLM10

Max. RMS width (nm)

OTR1_X5

OTR1_VL5

1480-1580

1500-1520

1500-1520

SLM

SLM

SLM

SLM

7.7

Min. side mode suppression ratio


(dB)

30

30

> 30

> 30

Min. mean launched power (dBm)

-15

-5

-5

+1

Max. mean launched power (dBm)

-8

+5

+5

Min. extinction ratio (dB)

8.2

10

10

10

10

Min. sensitivity (BER of 1*10-12) EOL


(dBm)

-28

-34

-34

-35

-42

Min. overload (dBm)

-8

-10

-10

-8

-5

Max. receiver reflectance (dB)

-25

Max. dispersion [ps/nm]

96

Min. optical return loss of cable (dB)

-20

-20

Max. discrete reflectance (dB)

-25

-25

-25

Max. optical path penalty (dB)

NOTE:

When selecting bidirectional transceivers, pay attention that they must operate in
complementary pairs. For example: OTR1-S3BD can work only vis-a-vis OTR1-S5BD;
OTR4-L3BD can work only vis-a-vis OTR4-L5BD, and so on. The transceivers in the following
table are arranged in complementary pairs.
Table 3-2: STM-1 bidirectional transceivers
SFP transceiver name

OTR1-S3BD

OTR1-S5BD

OTR1-L3BD

OTR1-L5BD

Application code11

BD 312

BD 513

L3BD

L5BD

New optical SFP transceivers for existing SIO1&4B basecard.

Application code is in reference to ITU-T Recommendation G.691.

10

MultiLongitudinal Mode (MLM) source type laser can also operate with single mode fibers for S-1.1 interfaces in reference to ITU-T
Recommendation G.957.
11

Application code is in reference to ITU-T Recommendation G.691.

12

BD 3: STM-1 single-fiber bidirectional SFP module with a 1310 nm TX wavelength.

13

BD 5: STM-1 single-fiber bidirectional SFP module with a 1550 nm TX wavelength.

ECI Telecom Ltd. Proprietary

3-7

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

SFP transceiver name

OTR1-S3BD

OTR1-S5BD

OTR1-L3BD

OTR1-L5BD

Application code11

BD 312

BD 513

L3BD

L5BD

Operating wavelength (nm)

1260-1360

1480-1580

1280-1360

1480-1580

Source type

MLM

MLM

MLM

SLM

Max. RMS width (nm)

Min. side mode suppression ratio (dB)

30

Min. mean launched power (dBm)

-14

-14

-5

-5

Max. mean launched power (dBm)

-8

-8

Min. extinction ratio (dB)

10

10

10

10

Min. sensitivity (BER of 1 * 10-12) EOL


(dBm)

-32

-32

-32

-32

Min. overload (dBm)

-8

-8

Max. receiver reflectance (dB)

Max. dispersion (ps/nm)

Min. optical return loss of cable (dB)

-20

-20

Max. discrete reflectance (dB)

Max. optical path penalty (dB)

TRANSMITTER

14

RECEIVER

OPTICAL PATH BETWEEN S & R

Parent Topic
3.3 SDH Interfaces

3.3.3 STM-4/OC-12 (622 Mbps 4.6 ppm) I/O Modules


CARD NAME

OM4_1I315

OM4_1S3

OM4_1L5

S-4.1

L-4.2

1270-1380

1274-1356

1480-1580

Source type

MLM

SLM

SLM

Max. RMS width (nm)

APPLICATION CODE16
Operating wavelength (nm)
TRANSMITTER

14

Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.

15

MLM transceiver for 2 km with multimode fibers.

16

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

3-8

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

OM4_1I315

CARD NAME
APPLICATION CODE16

OM4_1S3

OM4_1L5

S-4.1

L-4.2

Max. -20 dB width (nm)

Min. side mode suppression ratio (dB)

> 30

Min. mean launched power (dBm)

-19

-15

-3

Max. mean launched power (dBm)

-14

-8

+2

Min. extinction ratio (dB)

10

8.2

10

Min. sensitivity (BER of


1*10-12) EOL (dBm)

-31

-28

-28

Min. overload (dBm)

-8

-8

Max. receiver reflectance (dB)

-27

Max. dispersion (ps/nm)

74

Min. optical return loss of cable (dB)

-24

Max. discrete reflectance (dB)

-27

Max. optical path penalty (dB)

RECEIVER

OPTICAL PATH BETWEEN S AND R

Parent Topic
3.3 SDH Interfaces

3.3.4 STM-4/OC-12 SFP Optical Transceivers for OMS04_1


Table 3-3: STM-4 transceivers
SFP TRANSCEIVER NAME17

OTR4_S3

OTR4_L3

OTR4_L5

APPLICATION CODE18

S-4.1

L-4.1

L-4.2

Operating wavelength (nm)

1274-1356

1296-1330

1480-1580

1293-1334

1300-1325

Source type

MLM19

MLM20

SLM

Max. RMS width (nm)

4/2.5

TRANSMITTER

17

New optical SFP transceivers for existing SIO1&4B basecard.

18

Application code is in reference to ITU-T Recommendation G.691.

19

MultiLongitudinal Mode (MLM) source type laser can also operate with single mode fibers for S-1.1 interfaces in reference to ITU-T
Recommendation G.957.
20

MultiLongitudinal Mode (MLM) source type laser can also operate with single mode fibers for S-1.1 interfaces in reference to ITU-T
Recommendation G.957.

ECI Telecom Ltd. Proprietary

3-9

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

SFP TRANSCEIVER NAME17

OTR4_S3

OTR4_L3

OTR4_L5

Max. -20 dB width (nm)

<1

Min. side mode suppression ratio (dB)

30

30

Min. mean launched power (dBm)

-15

-3

-3

Max. mean launched power (dBm)

-8

+2

+2

Min. extinction ratio (dB)

8.2

10

10

Min. sensitivity (BER of 1*10-12) EOL (dBm)

-28

-28

-28

Min. overload (dBm)

-8

-8

-8

Max. receiver reflectance (dB)

-14

-27

Max. dispersion [ps/nm]

46/74

92/109

1600

Min. optical return loss of cable (dB)

20

24

Max. discrete reflectance (dB)

-25

-27

Max. optical path penalty (dB)

RECEIVER

OPTICAL PATH BETWEEN S & R

NOTE:

When selecting bidirectional transceivers, pay attention that they must operate in
complementary pairs. For example: OTR1-S3BD can work only vis-a-vis OTR1-S5BD;
OTR4-L3BD can work only vis-a-vis OTR4-L5BD, and so on. The transceivers in the following
table are arranged in complementary pairs.
Table 3-4: STM-4 bidirectional transceivers
SFP transceiver name

OTR4_S3BD

OTR4_S5BD

OTR4_L3BD

OTR4_L5BD

Application code21

S3BD

S5BD

L3BD

L5BD

Operating wavelength (nm)

1260-1360

1480-1580

1260-1360

1480-1580

Source type

MLM

SLM

MLM

SLM

Max. RMS width (nm)

Min. side mode suppression ratio (dB)

30

30

Min. mean launched power (dBm)

-15

-15

-3

-3

Max. mean launched power (dBm)

-8

-8

+2

+2

Min. extinction ratio (dB)

8.2

8.2

10

10

TRANSMITTER

RECEIVER22

21

Application code is in reference to ITU-T Recommendation G.691.

22

Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.

ECI Telecom Ltd. Proprietary

3-10

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

SFP transceiver name

OTR4_S3BD

OTR4_S5BD

OTR4_L3BD

OTR4_L5BD

Application code21

S3BD

S5BD

L3BD

L5BD

Min. sensitivity (BER of 1 * 10-12) EOL


(dBm)

-28

-28

-28

-28

Min. overload (dBm)

-8

-8

-8

-8

Max. receiver reflectance (dB)

OPTICAL PATH BETWEEN S & R


Max. dispersion (ps/nm)
Min. optical return loss of cable (dB)

Max. discrete reflectance (dB)

Max. optical path penalty (dB)

Parent Topic
3.3 SDH Interfaces

3.3.5 STM-16/OC-48 (2488.32 Mbps 4.6 ppm) I/O Modules


CARD NAME

OM16_
1AX5xx

OM16_
1AV5xx

OM16_
1AB5xx

OM16_
1AX5

OM16_
1AL5

OM16_
1PS3

OM16_
1PI3

X-16.2

V-16.2

U-16.2

X-16.2

L-16.2

S-16.1

I-16

15301560

15301565

15301565

15301560

15301565

12601360

1260-1360

Source type

SLM

SLM

SLM

SLM

SLM

SLM

SLM

Max. -20 dB width (nm)

Max. RMS width (nm)

Min. side mode suppression


(dB)

30

30

30

30

30

30

Min. mean launched power


(dBm)

+5.5

+1

+0

+5.5

+0

-5

-10

Max. mean launched power


(dBm)

+7.5

+3

+2

+7.5

+3

-3

Min. extinction ratio (dB)

8.2

8.2

8.2

8.2

8.2

8.2

8.2

APD

APD

APD

APD

APD

Pin

Pin

APPLICATION CODE

23

Operating wavelength (nm)


TRANSMITTER

RECEIVER
Photodiode type

23

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

3-11

NPT Product Line System Specifications

CARD NAME

NPT-1600/NPT-1600C Specifications

OM16_
1AX5xx

OM16_
1AV5xx

OM16_
1AB5xx

OM16_
1AX5

OM16_
1AL5

OM16_
1PS3

OM16_
1PI3

X-16.2

V-16.2

U-16.2

X-16.2

L-16.2

S-16.1

I-16

Min. sensitivity
(BER of 1*10-12)
EOL (dBm)

-28

-28

-28

-28

-28

-18

-16

Min. overload (dBm)

-7

-7

-7

-7

-7

-27

-27

-27

-27

-27

-27

APPLICATION CODE

23

Max. receiver reflectance (dB) -27


OPTICAL PATH BETWEEN S AND R
Max. dispersion (ps/nm)

1800

1800

3000

2160

1800

Min. optical return loss of


cable (dB)

-24

-24

-24

-24

-24

-24

-24

Max. discrete reflectance (dB) -27

-27

-27

-27

-27

-27

-27

Max. optical path penalty (dB) < 2

<2

<2

<3

<2

<2

<1

Notes:

For the maximum dispersion of OM16_1AB5 to reach distances of 150 km, OM16_1AB5
should be connected to a booster

The dispersion value for OM16_1PS3 and OM16_1PI3 is relevant only in the 1500 nm
wavelength. PS3 is for 25 km and PI3 for 2 km.

Parent Topic
3.3 SDH Interfaces

3.3.6 SDH STM-16/OC-48 SFP Optical Transceivers


Table 3-5: STM-16 transceivers
SFP TRANSCEIVER NAME24

OTR16_I3

OTR16_S3

OTR16_L3

OTR16_L5

APPLICATION CODE

I-16

S-16.1

L-16.1

L-16.2

Operating wavelength (nm)

1260-1360

1260-1360

1280-1335

1500-1580

Source type

SLM

SLM

SLM

SLM

Max. -20 dB width (nm)

<1

TRANSMITTER

24

New optical SFP transceivers for existing SIO16 basecard.

ECI Telecom Ltd. Proprietary

3-12

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

SFP TRANSCEIVER NAME24

OTR16_I3

OTR16_S3

OTR16_L3

OTR16_L5

Max. RMS width (nm)

Min. side mode suppression (dB)

30

30

30

Min. mean launched power (dBm)

-10

-5

-2

-2

Max. mean launched power (dBm)

-3

+3

+3

Min. extinction ratio (dB)

8.2

8.2

8.2

8.2

Min. sensitivity (BER of


1*10-12) EOL (dBm)

-16

-18

-27

-28

Min. overload (dBm)

-9

-9

Max. receiver reflectance (dB)

-27

-27

-27

-27

Max. dispersion [ps/nm]

1600

Min. optical return loss of cable (dB)

-24

-24

-24

-24

Max. discrete reflectance (dB)

-27

-27

-27

-27

Max. optical path penalty (dB)

<1

RECEIVER

OPTICAL PATH BETWEEN S & R

NOTES:

When selecting bidirectional transceivers, pay attention that they must operate in
complementary pairs. For example: OTR1-S3BD can work only vis-a-vis OTR1-S5BD;
OTR4-L3BD can work only vis-a-vis OTR4-L5BD, and so on. The transceivers in the
following table are arranged in complementary pairs.

Application code is in reference to ITU-T Recommendation G.691.

All OTR SFP transceivers can be used with SIO164 or XIO384F cards, utilizing the
OMSC16_4 module (up to 4 SFP transceivers per module).

Table 3-6: STM-16 bidirectional transceivers


SFP transceiver name

OTR16_S3BD

OTR16_S5BD

OTR16_L3BD

OTR16_L5BD

Application code25

S3BD

S5BD

L3BD

L5BD

Operating wavelength (nm)

1260-1360

1480-1580

1260-1360

1480-1580

Source type

SLM

SLM

SLM

SLM

Max. RMS width (nm)

Min. side mode suppression ratio (dB)

30

30

30

30

TRANSMITTER

25

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

3-13

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

SFP transceiver name

OTR16_S3BD

OTR16_S5BD

OTR16_L3BD

OTR16_L5BD

Application code25

S3BD

S5BD

L3BD

L5BD

Min. mean launched power (dBm)

-5

-5

-2

-2

Max. mean launched power (dBm)

+2

+2

+5

+5

Min. extinction ratio (dB)

8.2

8.2

8.2

8.2

Min. sensitivity (BER of 1 * 10-12) EOL


(dBm)

-18

-18

-27

-27

Min. overload (dBm)

-9

-9

Max. receiver reflectance (dB)

RECEIVER26

OPTICAL PATH BETWEEN S & R


Max. dispersion (ps/nm)
Min. optical return loss of cable (dB)

Max. discrete reflectance (dB)

Max. optical path penalty (dB)

Parent Topic
3.3 SDH Interfaces

3.3.7 CWDM and DWDM STM-16/OC-48/OTU1 SFP Optical


Transceivers
Notes:

Application code is in reference to ITU-T Recommendation G.691.

All OTR SFP transceivers can be used with SIO164 or XIO384F cards, utilizing the
OMSC16_4 module (up to 4 SFP transceivers per module).
CWDM

SFP TRANSCEIVER NAME27

OTC25_PSxx

DWDM
OTC25_1AL
xx

OTR25_A
Vxx

OTR25_ABx
x

26

Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.

27

New optical SFP transceivers for existing SIO16 basecard.

ECI Telecom Ltd. Proprietary

OTR16_I3

OTR16_S3

OTR16_L3

OTR16_L5

3-14

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

CWDM

DWDM

SFP TRANSCEIVER NAME27

OTC25_PSxx

OTC25_1AL
xx

APPLICATION CODE

S-C8S1-1D2/5

S-C8L1-1D2/ DW100L\- DW100L\--1 I-16


5
-1D2/5(C) D2/5(C)F
F
DW100C\--1
G.695
DW100C\- A2/5(C)F
-1A2/5(C)
G.698.1/.2
F

G.695

OTR25_A
Vxx

OTR25_ABx
x

OTR16_I3

OTR16_S3

OTR16_L3

OTR16_L5

S-16.1

L-16.1

L-16.2

G.698.1/.
2
Operating wavelength
(nm)

1464-1618

1464-1618

1530-1565 1530-1565

1260-1360

1260-1360

1280-1335

1500-1580

Source type

SLM

SLM

SLM

SLM

SLM

SLM

SLM

SLM

Max. -20 dB width (nm)

0.4

0.4

<1

Max. RMS width (nm)

Min. side mode


suppression (dB)

30

30

30

30

30

30

30

Min. mean launched


power (dBm)

-10

-5

-2

-2

Max. mean launched


power (dBm)

+5

+5

-3

+3

+3

Min. extinction ratio (dB)

8.2

8.2

8.2

8.2

8.2

8.2

8.2

8.2

Min. sensitivity (BER of


1*10-12)
EOL (dBm)

-21.5
(-23 GbE)

-28
(-32 GbE)

-28

-28

-16

-18

-27

-28

Min. overload (dBm)

-7

-9

-9

-9

-9

Max. receiver reflectance


(dB)

-27

-27

-27

-27

-27

-27

-27

-27

TRANSMITTER

RECEIVER

OPTICAL PATH BETWEEN S & R


Max. dispersion [ps/nm]

800
(40 km G.652)

1600
(80 km
G.652)

2400
(120 km
G.652)

3600
(180 km
G.652)

-24

1600

Min. optical return loss of


cable (dB)

24

24

-24

-24

-24

-24

-27

-24

Max. discrete reflectance


(dB)

-27

-27

-27

-27

-27

-27

-27

Max. optical path penalty


(dB)

1.5

2.5

<3

<2

<1

Parent Topic
3.3 SDH Interfaces
ECI Telecom Ltd. Proprietary

3-15

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.3.8 SDH STM-64/OC-192 (9953.28 Mbps 4.6 ppm) I/O


Modules
NOTES:

OM10 is supported, in all three SIO64 types

Application code is in reference to ITU-T Recommendation G.691.

OM64/OM10 optics are also available for DWDM applications as per the standard ITU-T
G.694.1 grid (n = 1-40).

For OM64_1ALSxx / OM10_1ALSxx receiver, when adding FEC, there is a typical


improvement of 2 dB for nonamplified networks (sensitivity of -25 dBm instead of -23
dBm).
OM64_
1ALSxx

OM64_
1ASSxx

OM10_1ALSxx

OM10_1ASSxx

APPLICATION CODE

L-64.2a

Operating wavelength (nm)

OM10_
1PSSxx

OM10_
1PLSxx

OM10_
1PSS3

OM10_
1PIS3

S-64.2a

I-64.2

L-64.2b

S-64.1

I-64.1

1530-1565

1530-1565

1530-1565

1530-1565

1285-1330

1285-1330

Source type

EML

EML

EML

EML

EML

EML

Min. mean launched power (dBm)

-2

-2

-2

-4

-6

Max. mean launched power (dBm)

+2

+3

+3

+3

+1

-1

Min. extinction ratio (dB)

9.0

8.2

8.2

10

APD

APD

PIN

PIN

PIN

PIN

-23

-19

-14

-14

-15

-11

Min. overload (dBm)

-8

-8

-1

-1

-1

-1

Max. optical path penalty (dB)

<2

<2

<2

<2

<1

<1

Max. receiver reflectance (dB)

-27

-27

-27

-27

-27

-27

CARD NAME

TRANSMITTER

RECEIVER
Photodiode type
Min. sensitivity
(BER of 1*10-12) EOL (dBm)

ECI Telecom Ltd. Proprietary

3-16

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

OM64_
1ALSxx

OM64_
1ASSxx

OM10_1ALSxx

OM10_1ASSxx

Max. attenuation range (dB)

21

Min. attenuation range (dB)

10

CARD NAME

OM10_
1PSSxx

OM10_
1PLSxx

OM10_
1PSS3

OM10_
1PIS3

15

10

10

10

10

800

800

160030

40

OPTICAL PATH BETWEEN S AND R

Max. chromatic dispersion (ps/nm)28 160029

Parent Topic
3.3 SDH Interfaces

3.3.9 MECP_OSC Cards


MECP_OC5OW

MECP_OC5UOW31

CARD NAME

MECP_OSC5

Operating wavelength (nm)

1500-1520

1500-1520

1500-1520

Signal Rate

155 Mbps

155 Mbps

2 Mbps

Source type

SLM

SLM

SLM

Max. RMS width (nm)

Max. -20 dB width (nm)

Min. side mode suppression ratio (dB)

> 30

> 30

> 30

Min. mean launched power (dBm)

+1

Max. mean launched power (dBm)

+2

+5

+5

Min. extinction ratio (dB)

10

10

10

Min. sensitivity (BER of 1*10-10) EOL


(dBm)

-34

-35

-54

Min. overload (dBm)

-10

-8

-5

Max. receiver reflectance (dB)

-25

[MECP_OC5XOW]

TRANSMITTER

RECEIVER

[-40]

28
Effective optical power budget calculation for single channel with no amplification: Tx min. power minus Rx sensitivity (EOL) minus max. optical
path penalty (dB).
29

The limitation for the long-range STM-64/OC-192 laser is 68 km. When adding FEC, the range can be extended up to 76 km.

30

The limitation for the long-range STM-64/OC-192 laser is 68 km. When adding FEC, the range can be extended up to 76 km.

31

No interoperability possible between MECP_OC5UOW and the other MECP_OSC modules.

ECI Telecom Ltd. Proprietary

3-17

NPT Product Line System Specifications

CARD NAME

NPT-1600/NPT-1600C Specifications

MECP_OC5UOW31

MECP_OC5OW

MECP_OSC5

[MECP_OC5XOW]

OPTICAL PATH BETWEEN S AND R

Max. dispersion (ps/nm)

Min. optical return loss of cable (dB)

-20

-20

Max. discrete reflectance (dB)

-25

-25

-25

Max. optical path penalty (dB)

Parent Topic
3.3 SDH Interfaces

3.3.10 SDH STM-64/OC-192 XFP Optical Transceivers


XFP TRANSCEIVER NAME

OTR64_I3

OTR64_S5

OTR64_L5

I-64.1

S-64.2b

L-64.2a

P1I1_2D1

P1S1_2D2b

P1L1-2D2

1290-1330

1529-1560

1530-1565

1529-1560

1529-1560

Source type

SLM

SLM

SLM

SLM

SLM

Central frequency (THz)

NA

NA

NA

192.1 + 0.1m

192.1 + 0.1m

m=0 to 40

m=0 to 40

Maximum central frequency deviation


(GHz)

NA

12.5

12.5

Max. -20 dB width (nm)

32

APPLICATION CODE

OTR10_ASxx

OTR10_ALxx
1L1-2D2F

VSR2000_2R1
Operating wavelength (nm)
TRANSMITTER

NA

NA

<1

<1

<1

<1

<1

Min. side mode suppression (dB)

30

30

30

30

30

Min. mean launched power (dBm)

-6

-1

-1

-1

Max. mean launched power (dBm)

-1

+2

+4

+3

+3

Min. extinction ratio (dB)

8.2

8.2

Min. sensitivity (BER of 1*10-12)


EOL (dBm)

-11

-14

-24

-24

-24

Min. overload (dBm)

-1

-1

-7

-8

-8

Max. receiver reflectance (dB)

-27

-27

-27

-27

-27

RECEIVER

32

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

3-18

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

XFP TRANSCEIVER NAME

OTR64_I3

OTR64_S5

OTR64_L5

APPLICATION CODE32

I-64.1

S-64.2b

L-64.2a

P1I1_2D1

P1S1_2D2b

P1L1-2D2

OTR10_ASxx

OTR10_ALxx
1L1-2D2F

VSR2000_2R1
OPTICAL PATH BETWEEN S & R
Max. dispersion [ps/nm]

6.6

800

1600

800

1600

Min. optical return loss of cable (dB)

24

24

24

Max. discrete reflectance (dB)

-27

-27

-27

-27

-27

Max. optical path penalty (dB)

Parent Topic
3.3 SDH Interfaces

3.3.11 OW Unit Specifications


The OW unit supports omnibus conference call with two separate configurable networks (A and B). Any
user within the network can select another user in its network by direct dialing (DTMF).
Tx/Rx level

7 dBm, 600 , (per CCITT G.711)

Speech coding and bit rate

PCM A-law 8 Kbps

Number of VF channels

10 to 12

Band pass

300 to 3400 Hz

Subscriber side input/output level

7 dBm, 600 , (per CCITT G.711)

Idle channel noise

(-) 75 dBmOp

Number of data channels

3 (E1, E2, F1)

Interface connectors type

Tel JACK 6P4C RCA

Data rates

64 Kbps

Parent Topic
3.3 SDH Interfaces

ECI Telecom Ltd. Proprietary

3-19

NPT Product Line System Specifications

3.4

NPT-1600/NPT-1600C Specifications

NPT MPLS/Ethernet Card Summary

The following table identifies the MPLS/Ethernet components and the platforms within which specific
modules are used. The different modules are listed by interface categories, where the modules within a
category generally share the same functionality. Specific details may vary from module to module.
Interface

NPT-1600

NPT-1600C

MCS5

MCS10

MCS30_X10G

MCS50_X10G

Ethernet/MPLS Layer 1 and 2

Parent Topic
3 NPT-1600/NPT-1600C Specifications

ECI Telecom Ltd. Proprietary

3-20

NPT Product Line System Specifications

3.5

NPT-1600/NPT-1600C Specifications

Data Cards
Intercard
interfaces

Data
handling

4 x FX/GbE (optical)34 +
4 x FX (optical) +
[12 x 10/100BaseT +
4 x 10/100/1000BaseT]35

---

32 x EoS/MoT
Layer 2
(Ethernet/
MPLS)

(1 to 16) x VC-436
(1 to 48) x VC-337
(1 to 63) x VC-1238

MCS1039

8 x FX/GbE (optical)40 +
[8 x 10/100BaseT +
8 x 10/100/1000BaseT]41

---

32 x EoS/MoT
Layer 2
(Ethernet/
MPLS)

(1 to 16) x VC-442
(1 to 48) x VC-343
(1 to 63) x VC-1244

MCS30_X10G

1 x 10GbE (optical) XFP+


10 x FX/GbE (optical)46
SFP

1 x 10 GbE

Layer 2
32 x EoS/MoT
(Ethernet/
MPLS)

(1 to 64) x VC-4
(1 to 192) x VC-3
(1 to 64) x VC-12

MCS50_X10G

4 x 10GbE (optical) XFP+


4 x 1GbE (optical) SFP

2 x 10 GbE

Layer 2
96 x EoS/MoT
(Ethernet/
MPLS)

(1 to 64) x
VC-4/STS-3c SPE
(1 to 192) x
VC-3/47STS-1c SPE
(1 to 46) x VC-1248

Card

Service interfaces

MCS533

45

Network
interfaces

Bandwidth per EoS


interface

Parent Topic
3 NPT-1600/NPT-1600C Specifications

33

Can be accommodated in 5 Gbps, or 10 Gbps slots only, with 5 Gbps EoS capacity.

34

Optical ports on base cards, SFP for GbE or FX.

35

Electrical ports located on ME_16 module in the CCP. Not relevant for XDM-2000, XDM-3000, or NPT-1600C.

36

Maximum EoS/MoT capacity per card: 5 Gbps (32xVC-4 or 96xVC-3) and per EoS port when using LAG.

37

Maximum EoS/MoT capacity per card: 5 Gbps (32xVC-4 or 96xVC-3) and per EoS port when using LAG.

38

Maximum n x VC-12 per card: 512 x VC-12.

39

Can be accommodated in 10 Gbps slots only.

40

Optical ports on base cards, SFP for GbE or FX.

41

Electrical ports located on ME_16 module in the CCP. Not relevant for XDM-2000, XDM-3000, or NPT-1600C.

42

Maximum EoS/MoT capacity per card: 10 Gbps (64xVC-4 or 192xVC-3) and per EoS port when using LAG.

43

Maximum EoS/MoT capacity per card: 10 Gbps (64xVC-4 or 192xVC-3) and per EoS port when using LAG.

44

Maximum n x VC-12 per card: 512 x VC-12.

45

Can be accommodated in 10 Gbps slots only.

46

Supported starting V8.2

47

Maximum EoS/MoT capacity per card: 10 Gbps (64xVC-4 or 192xVC-3) and per EoS port when using LAG.

48

Maximum n x VC-12 per card: 504 x VC-12.

ECI Telecom Ltd. Proprietary

3-21

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.5.1 MCS5 Specifications


Interfaces

10/100/1000BaseT, 100BaseFX (single mode and multimode fiber),


1000BaseSX, 1000BaseLX, 1000BaseZX

Total EoS/MoT capacity

5 Gbps

Switch capacity

20 Gbps

MAC address memory

153,600 entries

Protection

50ms FRR link and node, <50ms Dual homed


Ethernet UNI/NNI LAG and EoS LAG, G.8032 (ERP)
Fast IOP MCS5 1+1 hot standby card protection

MPLS-based services

VPWS (Martini encapsulation), VPLS (Full mesh and star), Hierarchical VPLS
(H-VPLS) with multiple Split Horizon Groups and VPLS Spokes P2MP (Multicast
drop and continue), H-VPLS IGMP snooping and static MAC

Hard QoS

8192 policed flows per card supporting CIR, CBS and EIR, EBS Classification
based on port, CVLAN, CVLAN-Pbits, SVLAN, SVLAN-Pbits (802.1p priority bits),
DHCP field, Untagged Frame, BPDU, and Wildcard (all VLANs that are not
explicitly defined). Untagged frame handling with port-based VLAN
(attach/detach CVLAN and/or SVLAN to untagged frames) 8 Classes of Service
(CoS), Classification rules, CoS mapping, 2 rate policing, 3 colors marking,
Connection Admission Control (CAC) WRED, Shaping, Scheduling (WFQ/WRR
Weighted Fair Queuing / Weighted Round Robin)

MAC and VLANs

4093 x 4093 VLANs with 16K VLAN mapping rules, S-VLAN translation, S-VLAN
configurable Ether-type, FDB (Forwarding Data Base)

E2E OAM

Tunnel OAM (ITU-T Y.1711) with Connectivity Verification, Service OAM


(802.1ag) with Continuity Check, Loopback and Link Trace, Link OAM (802.3ah),
Link Loss Carry Forward (LLCF), Port Mirroring

Security

VSI (Virtual Switch Instance) VPN segregation, VLAN filtering, FIB quota, BSC
(Broadcast Storm Control)

Management

Point-and-click fast service creation, Management layers/Planes: Data, TDM,


optic, Supporting CAC for MPLS Tunnel and Service provisioning, Enhanced
protection by SRLG (Shared Risk Link Group) schemes

Services:
Triple Play

DTV/IPTV, HDTV, Gaming, VoD, VoIP, and HSI

Business connectivity

VPWS, VPLS, and H-VPLS

Mobile aggregation

3G Ethernet-based services, including VoIP, HSDPA, IPTV and video streaming,


MP3 streaming, VoD, video and voice
conferences

Wholesale/CoC

Ethernet bandwidth and leased lines

Standards compliance:
IEEE

802.1D/P/Q, 802.1w, 802.1ad, 802.1ag


802.3-2005, 802.3ad, 802.3ah (Link OAM), 802.3x

MEF

MEF 4, MEF 6, MEF 7, MEF9, MEF 10, MEF 11, MEF 12 MEF14

ECI Telecom Ltd. Proprietary

3-22

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

ITU-T

G.707, G.7041, G.7042, G.8010/Y.1306, G.8011/Y.1307,


G.8011.1/Y.1307.1, G.8011.2/Y.1307.2,
G.8012/Y.1308, Y.1710, Y.1711, G.783, G.8032/Y.1344

IETF

RFC 3031, RFC 3032, RFC 3270, RFC 3443, RFC 4448,
RFC 4379, RFC 3812, RFC 3813, RFC 2702, RFC 4090, RFC 3916,
RFC 3985, RFC 4125

Parent Topic
3.5 Data Cards

3.5.2 MCS10 Specifications


Interfaces

10/100/1000BaseT, 100BaseFX (single mode and multimode fiber),


1000BaseSX, 1000BaseLX, 1000BaseZX

Total EoS/MoT capacity

10 Gbps

Switch capacity

20 Gbps

MAC address memory

153,600 entries

Protection

50ms FRR link and node, <50ms Dual homed Ethernet UNI/NNI LAG and EoS LAG,
G.8032 (ERP) Fast IOP MCS10 1+1 hot standby card protection

MPLS-based services

VPWS (Martini encapsulation), VPLS (Full mesh and star), Hierarchical VPLS
(H-VPLS) with multiple Split Horizon Groups and VPLS Spokes, P2MP (Multicast
drop and continue) IGMP snooping and static MAC

Hard QoS

8192 policed flows per card supporting CIR, CBS and EIR, EBS Classification based
on port, CVLAN, CVLAN-Pbits, SVLAN, SVLAN-Pbits (802.1p priority bits), DHCP
field, Untagged Frame, BPDU, and Wildcard (all VLANs that are not explicitly
defined). Untagged frame handling with port-based VLAN (attach/detach CVLAN
and/or SVLAN to untagged frames) Eight Classes of Service (CoS), Classification
rules, CoS mapping, 2 rate policing, 3 colors marking, Connection Admission
Control (CAC) WRED, Shaping, Scheduling (WFQ/WRR Weighted Fair Queuing /
Weighted Round Robin)

MAC and VLANs

4093 x 4093 VLANs with 16K VLAN mapping rules, SVLAN translation, S-VLAN
configurable Ether-type, FDB (Forwarding Data Base)

E2E OAM

Tunnel OAM (ITU-T Y.1711) with Connectivity Verification, Service OAM (802.1ag)
with Continuity Check, Loopback and Link Trace, Link OAM (802.3ah), Link Loss
Carry Forward (LLCF), Port Mirroring

Security

VSI (Virtual Switch Instance) VPN segregation, VLAN filtering, FIB quota, BSC
(Broadcast Storm Control)

Management

Point-and-click fast service creation, Management layers/Planes: Data, TDM,


optic, Supporting CAC for MPLS Tunnel and Service provisioning, Enhanced
protection by SRLG (Shared Risk Link Group) schemes

Services:
Triple Play

DTV/IPTV, HDTV, Gaming, VoD, VoIP, and HSI

Business connectivity

VPWS and VPLS, H-VPLS

ECI Telecom Ltd. Proprietary

3-23

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

Mobile aggregation

3G Ethernet-based services, including VoIP, HSDPA, IPTV and video streaming,


MP3 streaming, VoD, video and voice conferences

Wholesale/CoC

Ethernet bandwidth and leased lines

Standards compliance:
IEEE

802.1D/P/Q, 802.1w, 802.1ad, 802.1ag 802.3-2005, 802.3ad, 802.3ah (Link OAM),


802.3x

MEF

MEF 4, MEF 6, MEF 7, MEF9, MEF 10, MEF 11, MEF 12 MEF14

ITU-T

G.707, G.7041, G.7042, G.8010/Y.1306, G.8011/Y.1307, G.8011.1/Y.1307.1,


G.8011.2/Y.1307.2, G.8012/Y.1308, Y.1710, Y.1711, G.783, G.8032/Y.1344
G.8011.1/Y.1307.1, G.8011.2/Y.1307.2, G.8012/Y.1308, Y.1710, Y.1711, G.783,
G.8032/Y.1344

IETF

RFC 3031, RFC 3032, RFC 3270, RFC 3443, RFC 4448,
RFC 4379, RFC 3812, RFC 3813, RFC 2702, RFC 4090,
RFC 3916, RFC 3985, RFC 4125

Parent Topic
3.5 Data Cards

3.5.3 MCS30_X10G Specifications


Interfaces

10GBase-SR (850nm MM), 10GBase-LR (1310nm SM), 10GBase-ER (1550nm SM),


10GBase-ER (1550nm SM), 10GBase-ER (15XXnm DWDM, SM)

Intercard connectivity

GbE

Total EoS/MoT capacity 10 Gbps


Switch capacity

20 Gbps

MAC address memory

153,600 entries

Protection

50ms FRR link and node, <50ms Dual homed Ethernet UNI/NNI LAG and EoS LAG,
G.8032 (ERP) Fast IOP MCS30_X10G 1+1 hot standby card protection

Synchronization

SyncE and 1588v2 synchronization mechanisms

MPLS-based services

VPWS (Martini encapsulation), VPLS (Full mesh and star), Hierarchical VPLS
(H-VPLS) with multiple Split Horizon Groups and VPLS Spokes, P2MP (Multicast
drop and continue) IGMP snooping and static MAC

Hard QoS

8192 policed flows per card supporting CIR, CBS and EIR, EBS Classification based
on port, CVLAN, CVLAN-Pbits, SVLAN,
SVLAN-Pbits (802.1p priority bits), DHCP field, Untagged Frame, BPDU, and
Wildcard (all VLANs that are not explicitly defined). Untagged frame handling with
port-based VLAN (attach/detach CVLAN and/or SVLAN to untagged frames) Eight
Classes of Service (CoS), Classification rules, CoS mapping, 2 rate policing, 3 colors
marking, Connection Admission Control (CAC) WRED, Shaping, Scheduling
(WFQ/WRR Weighted Fair Queuing / Weighted Round Robin)

ECI Telecom Ltd. Proprietary

3-24

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

MAC and VLANs

4093 x 4093 VLANs with 16K VLAN mapping rules, SVLAN translation, S-VLAN
configurable Ether-type, FDB (Forwarding Data Base)

E2E OAM

VSI (Virtual Switch Instance) VPN segregation, VLAN filtering, FIB quota, BSC
(Broadcast Storm Control)

Security

VSI (Virtual Switch Instance) VPN segregation, VLAN filtering, FIB quota, BSC
(Broadcast Storm Control)

Management

Point-and-click fast service creation, Management layers/Planes: Data, TDM, optic,


Supporting CAC for MPLS Tunnel and Service provisioning, Enhanced protection by
SRLG (Shared Risk Link Group) schemes

Services:
Triple Play

DTV/IPTV, HDTV, Gaming, VoD, VoIP, and HSI

Business connectivity

VPWS, VPLS, H-VPLS

Mobile aggregation

3G Ethernet-based services, including VoIP, HSDPA, IPTV and video streaming, MP3
streaming, VoD, video and voice conferences

Wholesale/CoC

Ethernet bandwidth and leased lines

Standards compliance:
IEEE

802.1D/P/Q, 802.1w, 802.1ad, 802.1ag 802.3-2005, 802.3ad, 802.3ah (Link OAM),


802.3x

MEF

MEF 4, MEF 6, MEF 7, MEF9, MEF 10, MEF 11, MEF 12 MEF14

ITU-T

G.707, G.7041, G.7042, G.8010/Y.1306, G.8011/Y.1307, G.8011.1/Y.1307.1,


G.8011.2/Y.1307.2, G.8012/Y.1308, Y.1710, Y.1711, G.783, G.8032/Y.1344, G.8261,
G.8262, G.8263, G.8264

IETF

RFC 3031, RFC 3032, RFC 3270, RFC 3443, RFC 4448, RFC 4379, RFC 3812, RFC
3813, RFC 2702, RFC 4090, RFC 3916, RFC 3985, RFC 4125

Parent Topic
3.5 Data Cards

3.5.4 MCS50_X10G Specifications


Interfaces

10GBase-SR (850nm MM), 10GBase-LR


(1310nm SM), 10GBase-ER (1550nm SM), 10GBase-ER (1550nm SM),
10GBase-ER (15XXnm DWDM, SM)

Intercard connectivity

20 GbE

Total EoS/MoT capacity

10 Gbps

Switch capacity

50 Gbps

MAC address memory

153,600 entries

Protection

50ms FRR link and node, <50ms Dual homed Ethernet UNI/NNI LAG and EoS
LAG, G.8032 (ERP) Fast IOP MCS50_X10G 1+1 hot standby card protection

ECI Telecom Ltd. Proprietary

3-25

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

Synchronization

SyncE synchronization mechanisms

MPLS-based services

VPWS (Martini encapsulation), VPLS (Full mesh and star), Hierarchical VPLS
(H-VPLS) with multiple Split Horizon Groups and VPLS Spokes, P2MP (Multicast
drop and continue) IGMP snooping and static MAC

Hard QoS

8192 policed flows per card supporting CIR, CBS and EIR, EBS Classification
based on port, CVLAN, CVLAN-Pbits, SVLAN, SVLAN-Pbits (802.1p priority bits),
DHCP field, Untagged Frame, BPDU, and Wildcard (all VLANs that are not
explicitly defined). Untagged frame handling with port-based VLAN
(attach/detach CVLAN and/or SVLAN to untagged frames) Eight Classes of
Service (CoS), Classification rules, CoS mapping, 2 rate policing, 3 colors
marking, Connection Admission Control (CAC) WRED, Shaping, Scheduling
(WFQ/WRR Weighted Fair Queuing / Weighted Round Robin)

MAC and VLANs

4093 x 4093 VLANs with 16K VLAN mapping rules, SVLAN translation, S-VLAN
configurable Ether-type, FDB (Forwarding Data Base)

E2E OAM

VSI (Virtual Switch Instance) VPN segregation, VLAN filtering, FIB quota, BSC
(Broadcast Storm Control)

Security

VSI (Virtual Switch Instance) VPN segregation, VLAN filtering, FIB quota, BSC
(Broadcast Storm Control)

Management

Point-and-click fast service creation, Management layers/Planes: Data, TDM,


optic, Supporting CAC for MPLS Tunnel and Service provisioning, Enhanced
protection by SRLG (Shared Risk Link Group) schemes

Services:
Triple Play

DTV/IPTV, HDTV, Gaming, VoD, VoIP, and HSI

Business connectivity

VPWS, VPLS, H-VPLS

Mobile aggregation

3G Ethernet-based services, including VoIP, HSDPA, IPTV and video streaming,


MP3 streaming, VoD, video and voice conferences

Wholesale/CoC

Ethernet bandwidth and leased lines

Standards compliance:
IEEE

802.1D/P/Q, 802.1w, 802.1ad, 802.1ag 802.3-2005, 802.3ad, 802.3ah (Link


OAM), 802.3x

MEF

MEF 4, MEF 6, MEF 7, MEF9, MEF 10, MEF 11, MEF 12 MEF14

ITU-T

G.707, G.7041, G.7042, G.8010/Y.1306, G.8011/Y.1307,


G.8011.1/Y.1307.1, G.8011.2/Y.1307.2, G.8012/Y.1308,
Y.1710, Y.1711, G.783, G.8032/Y.1344, G.8261, G.8262, G.8263, G.8264

IETF

RFC 3031, RFC 3032, RFC 3270, RFC 3443, RFC 4448, RFC 4379, RFC 3812, RFC
3813, RFC 2702, RFC 4090, RFC 3916, RFC 3985, RFC 4125

Parent Topic
3.5 Data Cards

ECI Telecom Ltd. Proprietary

3-26

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.5.5 Data Client Transceivers for MCS5, MCS10,


MCS30_X10G, MCS50_X10G
OTGBE_SX

OTGBE_LX

OTGBE_ZX

OTFE_MM

OTFE_SM

OTGBE_S3B
D

OTGBE_S5B
D

OTGBE_L3B
D

OTGBE_L5B
D

Transmitter
type

GbE
short-reach
laser, 850
nm,
multi-mode

GbE
long-reach
laser, 1310
nm, single
mode

GbE very
long-reach
laser, 1550
nm, single
mode

FX,
short-reach
laser, 1310
multi-mode

FX,
short-reach
laser, 1310
nm, single
mode

Bidirectional Bidirectional Bidirectional Bidirectional


SFP,
SFP,
SFP,
SFP,
1310 nm
1490 nm
1310 nm
1490 nm

Data rate
(nominal)
(Mbaud)

1250

1250

1250

125

125

1250

1250

1250

1250

Average
launch
power
(dBm)

-3 Max.

-3

-15

-8

-3 Max.

-3

+2

+2

-9.5 Min.

-11

-20

-15

-10 Min.

-10

-5

-5

Min.
transmitter
extinction
ratio (dB)

10

8.2

>9

>9

>9

>9

Data format

8B/10B

8B/10B

8B/10B

N/A

N/A

8B/10B

8B/10B

8B/10B

8B/10B

Average
receiver
sensitivity
(dBm)

-20 Min.

-22

--

-30

--

< -21

< -21

< -23

< -23

-21 Typical

-25.5

-22

-31

< -28

< -22

< -22

< -24

< -24

Max.
receiver
overload
(dBm)

-14

-8

-3

-3

Typical Rx
LOS level
(dBm)

-24

-29

-25

< -33

<-28

-35

-35

-33

-33

Connector

LC

LC

LC

LC

LC

LC

LC

LC

LC

Fiber
lengths

550 m
(50/62.5
m MMF)

10 km
(9 m SMF)

80 km
(9 m SMF)

2000 m
(50/62.5
m MMF)

10 km
(9 m SMF)

10 km
(9 m SMF)

10 km
(9 m SMF)

40 km
(9 m SMF)

40 km
(9 m SMF)

Parent Topic
3.5 Data Cards

ECI Telecom Ltd. Proprietary

3-27

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.5.6 Data Client XFP Transceivers for MCS30_X10G,


MCS50_X10G
Transceiver

OTR103_ER
S-64.2b

Application code

P1S1_2D2b
10GBASE-ER

OTR103_ZR
L-64.2a
P1L1-2D2

OTR103_SR

OTR103_LR

10GBASE-SR

10GBASE-LR

Source type

SLM

SLM

MLM

SLM

Modulation

External

External

Direct

Direct

Operating output wavelength


(nm)

1529-1560

1530-1565

840-860

1290-1330

Direct max. -20 dB width (nm)

<1

<1

NA

<1

Min. side mode suppression ratio


(dB)

30

30

NA

30

Min. mean launched power (dBm) -1

-4

-8.2

Max. mean launched power (dBm) +2

+4

-1

+0.5

Min. extinction ratio (dB)

8.2

Maximum attenuation (dB)

11

22

Minimum attenuation (dB)

11

Max. dispersion (ps/nm)

800

1600

NA

6.6

Minimum optical return loss (dB)

24

24

12

12

Maximum discrete reflectance

-27

-27

-27

-27

Maximum DGD (ps)

30

30

30

30

Sensitivity (BER of 1*10-12) (dBm)

-14

-24

Min. overload (dBm)

-1

-7

-11
Stressed (-7.5)
-1

-12.6
-1

3.9
Maximum optical path penalty

(Transmitter and
dispersion penalty)

OCH switching time (ms)

<3

<3

<3

<3

Parent Topic
3.5 Data Cards

ECI Telecom Ltd. Proprietary

3-28

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.5.7 Data Line XFP Transceivers for MCS30_X10G,


MCS50_X10G
Transceiver

OTR10_ALxx

OTR10_ASxx

Application code

1L1-2D2F

Source type

SLM

Modulation

External, NRZ

Operating output wavelength (nm)

1529-1560

1529-1560

Central frequency (THz)

192.1 + 0.1m
m=0 to 40

192.1 + 0.1m

Maximum central frequency deviation (GHz)

12.5

12.5

Max. -20 dB width (nm)

<1

<1

Min. side mode suppression ratio (dB)

30

30

Min. mean launched power (dBm)

-1

Max. mean launched power (dBm)

+3

Min. extinction ratio (dB)

8.2

Sensitivity (BER of 1*10-12) (dBm)

-24

-24

Min. overload (dBm)

-8

-8

Maximum discrete reflectance

-27

-27

Maximum DGD (ps)

30

Max. dispersion (ps/nm)

1600

800

Maximum optical path penalty

OCH switching time (ms)

<3

SLM

Transmitter

m=0 to 40

Receiver

Optical Path

Parent Topic
3.5 Data Cards

ECI Telecom Ltd. Proprietary

3-29

NPT Product Line System Specifications

3.6

NPT-1600/NPT-1600C Specifications

Optical Components

The NPT optical layer can service pure optical networks as well as converged networks that integrate WDM
with data and SDH services in the same platform. To take full advantage of the NPT platform, a variety of
optical cards and modules are used for both the modules cage and the cards cage of the various shelves,
both in I/O slots as well as in the X1/X2 slots (otherwise used for the cross-connect matrix cards).

Parent Topic
3 NPT-1600/NPT-1600C Specifications

3.6.1 DWDM Mux/Demux Cards and Modules


This section describes the DWDM Mux/Demux cards and modules.

Parent Topic
3.6 Optical Components

3.6.1.1 DWDM cards (cards cage of NPT-1600 and NPT-1600C shelves)


Card

Width
(slots)

Function/Description

16/32-channel DWDM mux/demux cards (slots X1, X2)


DW16VMDRE-AG

Variable mux AWG, demux diffraction grating, 16 red


channels, expandable to 32 channels

Parent Topic
3.6.1 DWDM Mux/Demux Cards and Modules

3.6.1.2 DWDM modules (CCP cage of NPT-1600)


Conn.
type

Width
(slots)

Function/Description

MO_DW16MDR-BB-AVAV

LC

Mux AWG, demux AWG, 16 red channels, nonexpandable

MO_DW16MDRE-BB-AVAV

LC

Mux AWG, demux AWG, 16 red channels, expandable to 32 channels

MO_DW16MDB-BB-AVAV

LC

Mux AWG, demux AWG, 16 blue channels, expandable to 32 channels

MO_DW40MC-BB-AV

LC

Mux AWG, 40 channels, C band

MO_DW40DC-BB-AV

LC

Demux AWG, 40 channels, C band

Module
Flat Top mux/demux for cascading applications
for manual ROADM like operation

Parent Topic

3.6.1 DWDM Mux/Demux Cards and Modules


ECI Telecom Ltd. Proprietary

3-30

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.1.3 Mux (CCP Flat Top) specifications


Type

16-channel

32-channel

40-channel

Insertion loss (dB):

AWG

< 6.5

< 9.5

< 6.5

Adjacent isolation (dB):

AWG

< -27

< -27

< -27

Cumulative isolation (dB): AWG

< -24

< -24

< -24

PDL (dB)

AWG

<0.2

<0.2

<0.2

PMD (ps)

AWG

<0.5

<0.5

<0.5

Insertion Loss Uniformity (dB)

<1

<2

<1.8

Return loss (dB)

< -40

< -40

< -40

Parent Topic
3.6.1 DWDM Mux/Demux Cards and Modules

3.6.1.4 Demux (CCP Flat Top) specifications


Type

16-channel

32-channel

40-channel

Insertion loss (dB):

AWG

< 6.5

<8

< 6.5

Adjacent isolation (dB):

AWG

< -27

< -27

< -27

Cumulative isolation (dB):

AWG

< -24

N/A

< -24

PDL (dB)

AWG

<0.2

<0.2

<0.2

PMD (ps)

AWG

<0.5

<0.5

<0.5

Insertion Loss Uniformity (dB)

<1

<2

<1.8

Return loss (dB)

< -40

< -40

< -40

Parent Topic
3.6.1 DWDM Mux/Demux Cards and Modules

3.6.2 ROADM Cards


This section describes the ROADM cards.

Parent Topic
3.6 Optical Components

ECI Telecom Ltd. Proprietary

3-31

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.2.1 ROADM modules for NPT-1600 (CCP cage)


Module

Conn.
type

Width
(Slots)

Function/
Description

LC

Multi-degree optical

ROADM modules
MO_ROADM8A

add/drop of any combination of channels (100GHz spacing) to 9 ports.


WSS in add position.
MO_ROADM8A_50

LC

Multi-degree optical
add/drop of any combination of channels (50GHz spacing) to 9 ports.
WSS in add position.

MO_ROADM8D

LC

Multi-degree optical
add/drop of any combination of channels (100GHz spacing) to 9 ports.
WSS in drop position.

MO_ROADM2A

LC

100GHz spacing 2D WSS ROADM with Add/Drop ports in East/West


configuration. Requires external 40 Ch. Mux and DeMux. Can be used as
VMUX for OTM sites.

MO_ROADM2A_50

LC

50GHz spacing 2D WSS ROADM with Add/Drop ports in East/West


configuration. Requires external 80 Ch. Mux and DeMux. Can be used as
VMUX for OTM sites.

Parent Topic
3.6.2 ROADM Cards

3.6.2.2 MO_ROADM8A 100 GHz spacing Multi Degree configuration


Basecard type

ROADM8
Through

Drop

Local

MO_ROADM8A (dB) Add module

7.5

NA

7.5

MO_ROADM8A (dB) Drop module

11.5

11.5

9.5

MO_ROADM8A (dB) multi-degree Add + Drop


module

19

Adjacent isolation (dB):

<-40

PDL (dB)

At 0 dB Atten

<0.5

At 15 dB Atten

<1.3

PMD at 0 dB attenuation (ps)

Add

NA

<1

Parent Topic
3.6.2 ROADM Cards

ECI Telecom Ltd. Proprietary

3-32

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.2.3 MO_ROADM8A_50 50 GHz spacing Multi Degree


configuration
Basecard type

ROADM8A_50
Through

Drop

Local

Add

MO_ROADM8A_50 (dB) Add module

6.5

NA

6.5

6.5

MO_ROADM8A_50 (dB) Drop module

11.5

11.5

9.3

NA

MO_ROADM8A_50 (dB) multi-degree Add + Drop


module

18

Adjacent isolation (dB):

<40

PDL (dB)

At 0 dB Atten

<0.5

At 15 dB Atten

<0.8

PMD at 0 dB attenuation (ps)

<0.5

Parent Topic
3.6.2 ROADM Cards

3.6.2.4 MO_ROADM8D 100 GHz spacing Multi-Degree configuration


Basecard type

ROADM8
Through

Drop

Add

MO_ROADM8D (dB) Drop module

NA

MO_ROADM8D (dB) Add module

14

NA

14

MO_ROADM8D (dB) multi-degree Add + Drop module

21

Adjacent isolation (dB):-

<-40

Cumulative isolation (dB):

<-38

PDL (dB)

<0.45

PMD (ps)

<0.2

Parent Topic
3.6.2 ROADM Cards

ECI Telecom Ltd. Proprietary

3-33

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.2.5 MO_ROADM2A - 100 GHz spacing - 2D ROADM with


Equalization
Basecard type

MO_ROADM2A
Through

Local Drop

Local Add

MO_ROADM2A (dB) Add module

8.7

N/A

9.2

MO_ROADM2A (dB) Drop module

9.0

3.0

N/A

MO_ROADM2A (dB) two degree Add + Drop module

14.5

Add module integrated channel isolation (dB):

35

PDL (dB)

At 0 dB Atten

0.5

At 15 dB Atten

0.85

PMD at 0 dB attenuation (ps)

0.5

Parent Topic
3.6.2 ROADM Cards

3.6.2.6 MO_ROADM2A_50 - 50 GHz spacing - 2D ROADM with


Equalization
Basecard type

ROADM2A_50
Through

Local Drop

Local Add

MO_ROADM2A_50 (dB) Add module

8.7

N/A

9.2

MO_ROADM2A_50 (dB) Drop module

6.0

5.0

N/A

Add module integrated channel isolation (dB):

11.5

Adjacent isolation (dB):

35

PDL (dB)

DGD at 0 dB attenuation (ps)

At 0 dB Atten

0.5

At 15 dB Atten

0.85
0.5

Parent Topic
3.6.2 ROADM Cards

ECI Telecom Ltd. Proprietary

3-34

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.3 DWDM OADM Cards and Modules


This section describes the DWDM OADM cards and modules.

Parent Topic
3.6 Optical Components

3.6.3.1 DWDM OADM cards (cards cage)


Card

Width
(slots)

Function/Description

NPT-1600C

NPT-1600

Active OADM basecards for I/O slots


OADM4EW

Basecard for 1 active OADM filter; east/west


configuration

OADM4EW_SW

Basecard for 1 active OADM filter; east/west


configuration with 2x2 switch OADM (Ready
Site)

Parent Topic
3.6.3 DWDM OADM Cards and Modules

3.6.3.2 DWDM OADM plug-in filters for OADM cards


Module

Function/Description

OM_AD4RQEWxx

4-channel 100 GHz OADM filter with built-in equalization for east/west configuration, 4 skip 0,
10 bands in C-band

Parent Topic
3.6.3 DWDM OADM Cards and Modules

ECI Telecom Ltd. Proprietary

3-35

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.3.3 OM_AD4RQEW_xx 4skip0 OADM for I/O slots


Insertion Loss
Module type

Through

Drop

Add

<1.8

<3.3

<4.7

(dB)

<3.2

<4.0

<5.1

Adjacent isolation (dB):

<-30

Non-adjacent isolation (dB):

<-40

PDL (dB)

<0.1

PMD (ps)

<0.2

OADM4EW

49

(dB)

OADM4EW_SW

50

Parent Topic
3.6.3 DWDM OADM Cards and Modules

3.6.3.4 4-channel active OADM basecard only (no filters), 2 x 2 switch


through I/O slots
Type of OADM site

Basecard + 2x2 switches

E/W unprotected

2.6

E/W protected both base cards with 2x 2 switches

5.2

Parent Topic
3.6.3 DWDM OADM Cards and Modules

49

For protected sites using two East/West cards, the through insertion loss should be doubled.

50

For protected sites using two East/West cards, the through insertion loss should be doubled.

ECI Telecom Ltd. Proprietary

3-36

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.3.5 DWDM components (CCP cage of NPT-1600)


Module

Conn. type

Function/Description

Basecard for CWDM mux/demux/OADM modules


MO_CW2

NA

Basecard for up to two 4/8-channel CWDM mux/demux/OADM modules;


occupies one slot

4 Channel DWDM OADM module


OM_OADM4GEW_xx

LC

4-channel, 100 GHz DWDM OADM filter, 4skipe0, 10 channels in C-band

Parent Topic
3.6.3 DWDM OADM Cards and Modules

3.6.3.6 OM_OADM4GEW_xx 4 skip 0 OADM for CCP slots


Module type

Insertion Loss
Through

Drop

Add

OM_OADM4GEW (dB)

< 1.1

< 3.1

< 3.1

Adjacent isolation (dB):

<-30

Non-adjacent isolation (dB)::

<-40

PDL (dB)

<0.1

PMD (ps)

<0.2

Parent Topic
3.6.3 DWDM OADM Cards and Modules

3.6.4 CWDM Mux/Demux/OADM Components


This section describes the CWDM Mux/Demux/OADM components.

Parent Topic
3.6 Optical Components

ECI Telecom Ltd. Proprietary

3-37

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.4.1 CWDM components (CCP cage)


Module

Conn. type

Function/Description

Basecard for CWDM mux/demux/OADM modules


MO_CW2

NA

Basecard for up to two 4/8-channel CWDM mux/demux/OADM


modules; occupies one slot

OM_CWMD4C

LC

4-channel CWDM mux/demux for 1511 nm, 1531 nm, 1551 nm,
157 nm, with built-in 1310 nm OSC filter

OM_CWM8C

LC

8-channel CWDM mux for 1471 nm, 1491 nm, 1511 nm, 1531
nm, 1551 nm, 1571 nm, 1591 nm, 1611 nm with built-in 1310
nm OSC filter

OM_CWD8C

LC

8-channel CWDM demux for 1471, 1491, 1511, 1531, 1551,


1571,1591, 1611 nm with built-in 1310 nm OSC filter

OM_CWMD4C_E

LC

Upgradeable 4-channel CWDM mux/demux for 1511 nm, 1531


nm, 1551 nm, 1571 nm with built-in 1310 nm OSC filter

OM_CWMD4SL

LC

4-channel expansion CWDM mux/demux for 1471 nm, 1491 nm,


1591 nm, 1611 nm without OSC filter

4/8-Channel CWDM mux/demux modules

Parent Topic
3.6.4 CWDM Mux/Demux/OADM Components

3.6.4.2 Mux/demux specifications


OM-CWMD4C

OM_CWM8C &
OM_CWD8C

OM_CWMD4C-E

OM_CWMD4SL

Insertion loss mux + demux < 4.2


51
(dB)

< 5.5

< 4.9

< 7.3

Return loss (dB)

< 40

< 40

< 40

< 40

Directivity (dB)

< 45

< 45

< 45

< 45

Parent Topic
3.6.4 CWDM Mux/Demux/OADM Components

51

Including built-in 1310 nm OSC filter. The insertion loss for 1310 nm filter is 1.2dB.

ECI Telecom Ltd. Proprietary

3-38

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.5 Transponders
This section describes the transponders in various configurations.

Parent Topic
3.6 Optical Components

3.6.5.1 CHTR_B basecard Configurations


Card

No. of slots Function/Description

CMBR25_2

Basecard for two SFP data (GbE/FC/FICON) modules and 2.7 Gbps line with G.709 FEC

CMBR10_T

Basecard for 4xSTM16 OTN combiner with G.709 FEC/EFEC

TRP10_2B

Basecard for 10.7 Gbps transponders with G.709 FEC/EFEC

Parent Topic
3.6.5 Transponders

3.6.5.2 CHTR_B basecard modules and transceivers


Module

Function/Description

CMBR25 modules
OMCD25_2

2.7 Gbps Client/line card with G.709 FEC for two SFP data (GbE/FC/FICON) modules

CMTR25 modules
OMTR27_2

Line and client module for STM16/OTU1 services. CWDM and/or DWDM. Supports on-board
protection. Two modules fit on each CHTR_B base card

OMCM25_4

Line and client module for up to four services of STM1/4, FICON, FC100, FC200, GbE to 2.7G
combiner''''. CWDM and/or DWDM. Supports on-board protection. Two modules fit on CHTR_B base
card

2.7 Gbps optical cards for TRP25_4


OMTR27

2.7 Gbps Client/line card with G.709 FEC for STM-16 SFP transceiver

2.7 Gbps line transceivers for CMBR25 & TRP25_4


OTX27_AT

Tunable 2.7 Gbps transceiver, transmitter type B (with G.709 FEC) and APD receiver

2.7 Gbps line transceivers for CMTR25


OTC25_PSxx

2.7 Gbps CWDM transceiver (with or without outband FEC), short haul with PIN receiver

OTC25_ALxx

2.7 Gbps CWDM transceiver (with or without outband FEC), long haul with APD receiver

OTR25_AVxx

DWDM SFP: 2.5/2.7G transceiver 2400 ps/nm, channel xx, LC connectors

ECI Telecom Ltd. Proprietary

3-39

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

Module

Function/Description

OTR25_ABxx

DWDM SFP: 2.5/2.7G transceiver 3240 ps/nm, channel xx, LC connectors

10Gbps client side cards/transceivers for CMBR10, CMBR10_T, CMBR10_8D, TRP10_2B/LAN


OMS16_4T

Client card for four SFP STM-16 modules with timing transparency for all clients for CMBR10_T

OMSC16_4

Client card for four SFP STM-16 modules for CMBR10

OMTX10_S

Client card for STM-64/OC-192 XFP transceivers for TRP10_2B

OMTX10_LAN

Client card for XFP 10 GBE LAN transceivers for TRP10_LAN

OMCD_8

Line and client card for 8 x GbE/FC/FICON to 10.7G combiner for CMBR10_8D

OTR103_SR

10G LAN 10GBASE-SR transceiver module, 850nm MM fiber, PIN receiver, 300m

OTR103_LR

10G LAN 10GBASE-LR transceiver module, 1310nm , PIN receiver, 10Km

OTR103_ER

10G LAN 10GBASE-ER transceiver module, 1550nm , PIN receiver, 40Km

OTR103_ZR

10G LAN 10GBASE-ZR transceiver module, 1550nm , APD receiver, 80Km

OTR64_I3

STM-64/OC-192 client transceiver XFP, 1310nm short reach, 2km

OTR64_S5

STM-64/OC-192 client transceiver XFP, 1550nm short reach, 40km

OTR64_L5

STM-64/OC-192 client transceiver XFP, 1550nm long reach, 80km

10.7 Gbps line cards/transceivers for CMBR10, CMBR10_D, TRP10_2B/LAN


OMTX10

10.7 Gbps line card with G.709 FEC

OMTX10_S

10.7 Gbps Line card for XFP transceivers

OMTX10_EF

10.7 Gbps line card with G.709 FEC/EFEC

OTX10_ALxx

10.7 Gbps transceiver, colored transmitter type L (with G.709 FEC) and APD receiver

OTR10T_AL

Full C band tunable 10.7 Gbps transceiver, transmitter type L (with G.709 FEC/EFEC) and APD
receiver

OTX10_ATR

Full C band tunable 10.7 Gbps transceiver, transmitter type L (with G.709 FEC/EFEC) and APD
receiver, RZ modulation.

Client SFP transceivers for CMBR25, CMBR10 & TRP25_4, CMTR25


OTGBE_SX

Optical GbE/FC/FICON transceiver, short reach, 850 nm multimode fiber

OTGBE_LX

Optical GbE/FC/FICON transceiver, long reach, 1310 nm single-mode fiber

OTGBE_ZX

Optical GbE/FC/FICON transceiver, very long reach, 1550 nm single-mode fiber

OTGBE_S3BD

Bi-directional GbE SFP with 1310nm TX/1490nm Rx. Short Range (10km)

OTGBE_S5BD

Bi-directional GbE SFP with 1490nm TX/1310nm Rx. Short Range (10km)

OTGBE_L3BD

Bi-directional GbE SFP with 1310nm TX/1490nm Rx. Long Range (40km)

OTGBE_L5BD

Bi-directional GbE SFP with 1490nm TX/1310nm Rx. Long Range (40km)

OTR16_I3

STM-16/OC-48 transceiver, intra-office 1310 nm

ECI Telecom Ltd. Proprietary

3-40

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

Module

Function/Description

OTR16_S3

STM-16/OC-48 transceiver, short-haul 1310 nm

OTR16_L3

STM-16/OC-48 transceiver, long-haul 1310 nm

OTR16_L5

STM-16/OC-48 transceiver, long-haul 1550 nm

OTC25_PSxx

2.7 Gbps CWDM transceiver (with or without outband FEC), short haul with PIN receiver

OTC25_ALxx

2.7 Gbps CWDM transceiver (with or without outband FEC), long haul with APD receiver

OTR25_AVxx

DWDM SFP: 2.5/2.7G transceiver 2400 ps/nm, channel xx, LC connectors

OTR25_ABxx

DWDM SFP: 2.5/2.7G transceiver 3240 ps/nm, channel xx, LC connectors

10.7 Gbps line XFP transceivers for OMTX10_S


OTR10_ASxx

40 Km DWDM color XFP

OTR10_ALxx

80 Km DWDM color XFP

Parent Topic
3.6.5 Transponders

3.6.5.3 AoC basecard configurations


Card

No. of slots Function/Description

AoC

Basecard for multirate combiner or ADM on Card (requires two cards) supporting 8 SFP ports of
GbE, FC1/2, FICON, STM-16, OTU1

Parent Topic
3.6.5 Transponders

3.6.5.4 AoC basecard modules and transceivers


Module

Function/Description

10.7 Gbps line cards/transceivers for AoC


OMTX10

10.7 Gbps line card with G.709 FEC

OMTX10_S

10.7 Gbps Line card for XFP transceivers

OMTX10_EF

10.7 Gbps line card with G.709 FEC/EFEC

OTX10_ALxx

10.7 Gbps transceiver, colored transmitter type L (with G.709 FEC) and APD receiver

OTR10T_AL

Full C band tunable 10.7 Gbps transceiver, transmitter type L (with G.709 FEC/EFEC) and APD receiver

ECI Telecom Ltd. Proprietary

3-41

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

Module

Function/Description

OTX10_ATR

Full C band tunable 10.7 Gbps transceiver, transmitter type L (with G.709 FEC/EFEC) and APD receiver,
RZ modulation.

Client SFP transceivers for AoC


OTGBE_SX

Optical GbE/FC/FICON transceiver, short reach, 850 nm multimode fiber

OTGBE_LX

Optical GbE/FC/FICON transceiver, long reach, 1310 nm single-mode fiber

OTGBE_ZX

Optical GbE/FC/FICON transceiver, very long reach, 1550 nm single-mode fiber

OTGBE_S3BD

Bi-directional GbE SFP with 1310nm TX/1490nm Rx. Short Range (10km)

OTGBE_S5BD

Bi-directional GbE SFP with 1490nm TX/1310nm Rx. Short Range (10km)

OTR16_I3

STM-16/OC-48 transceiver, intra-office 1310 nm

OTR16_S3

STM-16/OC-48 transceiver, short-haul 1310 nm

OTR16_L3

STM-16/OC-48 transceiver, long-haul 1310 nm

OTR16_L5

STM-16/OC-48 transceiver, long-haul 1550 nm

OTC25_PSxx

2.7 Gbps CWDM transceiver (with or without outband FEC), short haul with PIN receiver

OTC25_ALxx

2.7 Gbps CWDM transceiver (with or without outband FEC), long haul with APD receiver

OTR25_AVxx

DWDM SFP: 2.5/2.7G transceiver 2400 ps/nm, channel xx, LC connectors

OTR25_ABxx

DWDM SFP: 2.5/2.7G transceiver 3240 ps/nm, channel xx, LC connectors

Parent Topic
3.6.5 Transponders

3.6.5.5 TRP10_4 basecard configurations


Card

No. of slots Function/Description

TRP10_4M

Multiservice dual 10G Transponder card for 10G LAN, STM-64/OC-192 and FC10 services.
Optimized for metro DWDM Networks - 2 x XFP client and 2 x XFP line

TRP10_4R

Multiservice dual 10G Transponder card for 10G LAN, STM-64/OC-192 and FC10 services.
Optimized for LH DWDM Networks, 2 x XFP client and 2 x XFP-EL line

Parent Topic
3.6.5 Transponders

ECI Telecom Ltd. Proprietary

3-42

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.5.6 TRP40_2B and CMBR40B configurations


Card

No. of slots Function/Description

TRP40_2B

40G DWDM tunable transponder card for STM-256/OC-768 services

CMBR40B

Multiservice 40G DWDM tunable combiner card for up to 4 XFP clients for OTU2/10G LAN,
STM-64/OC-192 services

Parent Topic
3.6.5 Transponders

3.6.5.7 TRP10_4 basecard transceivers


Module

Function/Description

10Gbps client side cards/transceivers for TRP10_4M and 4R


OTR103_SR

10G LAN 10GBASE-SR/FC10 transceiver module, 850nm MM fiber, PIN receiver, 300m

OTR103_LR

10G LAN 10GBASE-LR/FC10 transceiver module, 1310nm , PIN receiver, 10Km

OTR103_ER

10G LAN 10GBASE-ER/FC10 transceiver module, 1550nm , PIN receiver, 40Km

OTR103_ZR

10 LAN 10GBASE-ZR/FC10 transceiver module, 1550nm , APD receiver, 80Km

OTR64_I3

STM-64/OC-192/10G LAN/FC10 client transceiver XFP, 1310nm short reach, 2km

OTR64_S5

STM-64/OC-192/10G LAN/FC10 client transceiver XFP, 1550nm short reach, 40km

OTR64_L5

STM-64/OC-192/10G LAN/FC10 client transceiver XFP, 1550nm long reach, 80km

Line/Client transceivers for TRP10_4M


OTC10_PSxx

40 Km CWDM XFP

OTC10_ALxx

80 Km CWDM XFP

OTR10_ASxx

40 Km DWDM color XFP

OTR10_ALxx

80 Km DWDM color XFP

OTR10_AT

80 Km DWDM 80 ch. tunable XFP

Line transceivers for TRP10_4R


OTR10_ELT

80 Km DWDM 80 channels tunable XFP-EL

Parent Topic
3.6.5 Transponders

ECI Telecom Ltd. Proprietary

3-43

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.5.8 OMCM25_4 STM-1/OC-3 SFP Optical Transceivers


OTR1_S3BD52

OTR1_S5BD53

1480-1580

Tx: 1260-1360
Rx: 1480-1580

Tx: 1480-1580
Rx: 1260-1360

SLM

SLM

SLM

SLM

7.7

Min. side mode suppression ratio (dB)

30

30

Min. mean launched power (dBm)

-15

-5

-5

-14

-14

Max. mean launched power (dBm)

-8

-8

-8

Min. extinction ratio (dB)

8.2

10

10

10

10

Min. sensitivity (BER of 1*10-12) EOL


(dBm)

-28

-34

-34

-28

-28

Min. overload (dBm)

-8

-10

-10

-8

-8

Max. receiver reflectance (dB)

-25

Max. dispersion [ps/nm]

96

Min. optical return loss of cable (dB)

-20

Max. discrete reflectance (dB)

-25

Max. optical path penalty (dB)

SFP TRANSCEIVER NAME

OTR1_S3

OTR1_L3

OTR1_L5

APPLICATION CODE54

S-1.1

L-1.1

L-1.2

Operating wavelength (nm)

1261-1360

1263-1360

Source type

MLM55

Max. RMS width (nm)

TRANSMITTER

RECEIVER

OPTICAL PATH BETWEEN S & R

Parent Topic
3.6.5 Transponders

52

The OTR1_S3BD can only operate opposite the OTR1_S5BD, and vice versa. Total link budget is according to OTR1_S3BD parameters.

53

The OTR1_S3BD can only operate opposite the OTR1_S5BD, and vice versa. Total link budget is according to OTR1_S3BD parameters.

54

Application code is in reference to ITU-T Recommendation G.691.

55

MultiLongitudinal Mode (MLM) source type laser can also operate with single mode fibers for S-1.1 interfaces in reference to ITU-T
Recommendation G.957.

ECI Telecom Ltd. Proprietary

3-44

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.6 OMCM25_4 STM-4/OC-12 SFP Optical Transceivers


SFP TRANSCEIVER NAME

OTR4_S3

OTR4_L3

OTR4_L5

APPLICATION CODE56

S-4.1

L-4.1

L-4.2

Operating wavelength (nm)

1274-1356

1280-1335

1480-1580

Source type

MLM57

SLM

SLM

Max. RMS width (nm)

4/2.5

Max. -20 dB width (nm)

<1

Min. side mode suppression ratio (dB)

30

30

Min. mean launched power (dBm)

-15

-3

-3

Max. mean launched power (dBm)

-8

+2

+2

Min. extinction ratio (dB)

8.2

10

10

Min. sensitivity (BER of 1*10-12) EOL (dBm)

-28

-28

-28

Min. overload (dBm)

-8

-8

-8

Max. receiver reflectance (dB)

-14

-27

Max. dispersion [ps/nm]

74

Min. optical return loss of cable (dB)

20

24

Max. discrete reflectance (dB)

-25

-27

Max. optical path penalty (dB)

TRANSMITTER

RECEIVER

OPTICAL PATH BETWEEN S & R

Parent Topic
3.6 Optical Components

56

Application code is in reference to ITU-T Recommendation G.691.

57

MultiLongitudinal Mode (MLM) source type laser can also operate with single mode fibers for S-1.1 interfaces in reference to ITU-T
Recommendation G.957.

ECI Telecom Ltd. Proprietary

3-45

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.7 OMCM25_4 & AoC GbE/FC1 SFP Transceivers


OTGBE_SX

OTGBE_LX

OTGBE_ZX

OTGBE_S3BD

OTGBE_S5BD

OTGBE_L3BD

GbE/FC/FICON
short-reach
laser, 850 nm,
multimode

GbE/FC/FICON
long-reach laser,
1310 nm, single
mode

GbE/FC/FICON
very long-reach
laser, 1550 nm,
single mode

Bidirectional
SFP, 1310 nm

Bidirectional
SFP, 1490 nm

Bidirectional
Bidirectional
SFP, 1310 nm e SFP, 1490 nm

Data rate
1250
(nominal) (MBaud)

1250

1250

1250

1250

1250

1250

Average launch
power (dBm)

-3 Max.

-3

-3 Max.

-3

+2

+2

-9.5 Min.

-11

-10 Min.

-10

-5

-5

Min. transmitter
extinction ratio
(dB)

>9

>9

>9

>9

Data format

8B/10B

8B/10B

8B/10B

8B/10B

8B/10B

8B/10B

8B/10B

Average receiver
sensitivity (dBm)

-20 Min.

-22

--

< -21

< -21

< -23

< -23

-21 Typical

-25.5

-22

< -22

< -22

< -24

< -24

Max. receiver
overload (dBm)

-3

-3

Typical Rx LOS
level (dBm)

-24

-29

-25

-35

-35

-33

-33

Connector

LC

LC

LC

LC

LC

LC

LC

Fiber lengths

550 m

10 km

80 km

10 km

10 km

40 km

40 km

(50/62.5 m
MMF)

(9 m SMF)

(9 m SMF)

(9 m SMF)

(9 m SMF)

(9 m SMF)

(9 m SMF)

Transmitter type

OTGBE_L5BD

Parent Topic
3.6 Optical Components

3.6.8 OMCM25_4 & AoC FC2G Client SFPs


SFP TRANSCEIVER NAME

OTR16_MM

OTR16_I3

OTR16_S3

OTR16_L3

OTR16_L5

APPLICATION CODE

FC-200-M5/6-SN1

I-16

S-16.1

L-16.1

L-16.2

Operating wavelength (nm)

830-860

1260-1360

1260-1360

1280-1335

1500-1580

MM

SLM

SLM

SLM

SLM

<1

58

TRANSMITTER
Source type
Max. -20 dB width (nm)

58

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

3-46

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

SFP TRANSCEIVER NAME

OTR16_MM

OTR16_I3

OTR16_S3

OTR16_L3

OTR16_L5

APPLICATION CODE58

FC-200-M5/6-SN1

I-16

S-16.1

L-16.1

L-16.2

Max. RMS width (nm)

0.85

Min. side mode suppression (dB)

30

30

30

Min. mean launched power (dBm)

-9.5

-10

-5

-2

-2

Max. mean launched power (dBm)

-2.5

-3

+3

+3

8.2

8.2

8.2

8.2

-13

-16

-18

-27

-28

-9

-9

-27

-27

-27

-27

-27

Min. extinction ratio (dB)


RECEIVER
Min. sensitivity (BER of
1*10-12) EOL (dBm)
Min. overload (dBm)
Max. receiver reflectance (dB)
OPTICAL PATH BETWEEN S & R
Max. dispersion [ps/nm]

1600

Min. optical return loss of cable (dB)

-24

-24

-24

-24

-24

Max. discrete reflectance (dB)

-27

-27

-27

-27

-27

Max. optical path penalty (dB)

<1

Parent Topic
3.6 Optical Components

3.6.9 10 Gbps Optical Client XFP Transceivers for


Transponders and CMBR40B
Transceiver

OTR64_I3

OTR64_S5/
OTR103_ER

OTR64_L5/
OTR103_ZR

OTR103_SR

OTR103_LR

Application code

I-64.1

S-64.2b

L-64.2a

10GBASE-SR

10GBASE-LR

P1I1_2D1

P1S1_2D2b

P1L1-2D2

VSR2000_2R1

10GBASE-ER

1200-SM-LL-I

1200-SM-LL-V

Source type

SLM

SLM

SLM

MLM

SLM

Modulation

External

External

External

Direct

Direct

Operating output
wavelength (nm)

1290-1330

1529-1560

1530-1565

840-860

1290-1330

Direct max. -20 dB


width (nm)

<1

<1

<1

NA

<1

ECI Telecom Ltd. Proprietary

1200-SM-LL-L

3-47

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

Transceiver

OTR64_I3

OTR64_S5/
OTR103_ER

OTR64_L5/
OTR103_ZR

OTR103_SR

OTR103_LR

Application code

I-64.1

S-64.2b

L-64.2a

10GBASE-SR

10GBASE-LR

P1I1_2D1

P1S1_2D2b

P1L1-2D2

VSR2000_2R1

10GBASE-ER

1200-SM-LL-I

1200-SM-LL-V

Min. side mode


suppression ratio (dB)

30

30

30

NA

30

Min. mean launched


power (dBm)

-6

-1

-4

-8.2

Max. mean launched


power (dBm)

-1

+2

+4

-1

+0.5

Min. extinction ratio


(dB)

8.2

Maximum attenuation
(dB)

11

22

Minimum attenuation
(dB)

11

Max. dispersion
(ps/nm)

6.6

800

1600

NA

6.6

Minimum optical
return loss (dB)

24

24

24

12

12

Maximum discrete
reflectance

-27

-27

-27

-27

-27

Maximum DGD (ps)

30

30

30

30

30

Sensitivity (BER of
1*10-12) (dBm)

-11

-14

-24

-11

-12.6

Min. overload (dBm)

-1

-1

-7

-1

-1

Maximum optical path


penalty

3.9

OCH switching time


(ms)

<3

1200-SM-LL-L

Stressed (-7.5)

(Transmitter and
dispersion penalty)
<3

<3

<3

<3

Parent Topic
3.6 Optical Components

ECI Telecom Ltd. Proprietary

3-48

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.10 AoC/OMTR27_2 STM-16/OTU1 Client


CWDM

DWDM

SFP TRANSCEIVER NAME

OTR16_I3

OTR16_S3 OTR16_L3 OTR16_L5 OTC25_1PSx OTC25_1ALx OTR25_Avxx OTR25_ABxx


x
x

APPLICATION CODE59

I-16

S-16.1

L-16.1

L-16.2

DW100S1D2 DW100L\--1
/5(C)
D2/5(C)F
DW100S1A2
DW100C\--1
/5(C)
A2/5(C)F
G.698.1/.2

Operating wavelength (nm)

1260-136
0

1260-136
0

1280-133
5

1500-158
0

1464-1618

1464-1618

15300-1565

1530-1565

Source type

SLM

SLM

SLM

SLM

SLM

SLM

SLM

SLM

Max. -20 dB width (nm)

<1

0.4

0.4

Max. RMS width (nm)

Min. side mode suppression (dB)

30

30

30

30

30

30

30

Min. mean launched power (dBm)

-10

-5

-2

-2

Max. mean launched power (dBm)

-3

+3

+3

+5

+5

Min. extinction ratio (dB)

8.2

8.2

8.2

8.2

8.2

8.2

8.2

8.2

-16

-18

-27

-28

-21.5

-28

-28

-28

(-23 GbE)

(-32 GbE)

TRANSMITTER

RECEIVER
Min. sensitivity (BER of
1*10-12) EOL (dBm)
Min. overload (dBm)

-9

-9

-7

-9

-9

Max. receiver reflectance (dB)

-27

-27

-27

-27

-27

-27

-27

-27

OPTICAL PATH BETWEEN S & R


Max. dispersion [ps/nm]

1600

800

1600

2400

3600

(40 km
G.652)

(80 km
G.652)

(120 km
G.652)

(180 km
G.652)

Min. optical return loss of cable


(dB)

-24

-24

-24

-24

24

24

-24

-24

Max. discrete reflectance (dB)

-27

-27

-27

-27

-27

-27

-27

-27

Max. optical path penalty (dB)

<1

1.5

2.5

<3

<2

Parent Topic
3.6 Optical Components

59

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

3-49

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.11 TRP10_4 CWDM OTU2 Line/Client STM-64/10G


LAN/FC10/OTU2 XFP Optical Transceivers and
CMBR40B Client Transceivers
Transceiver

OTC10_PSxx

60

OTC10_ALxx

61

Application code
Source type

SLM

SLM

Modulation

NRZ

NRZ

Operating output wavelength (nm)

1465-1617

1465-1617

1471 + 20m

1471 + 20m

m=0 to 7

m=0 to 7

Maximum central frequency deviation (nm)

6.5

6.5

Max. -20 dB width (nm)

<1

<1

Min. side mode suppression ratio (dB)

30

30

Min. mean launched power (dBm)

Max. mean launched power (dBm)

Min. extinction ratio (dB)

8.2

8.2

S-band, C-band -16

S-band, C-band -23

L- band -15

L- band -21

-1

-7

Max. dispersion (ps/nm)

800

1400

Maximum optical path penalty

Transmitter
Central wavelength (nm)

Receiver
Sensitivity (BER of 1*10-12) (dBm)
Min. overload (dBm)
Optical Path
Maximum discrete reflectance
Maximum DGD (ps)

OCH switching time (ms)

Parent Topic

3.6 Optical Components


60

CWDM client in TRP10_4/CMBR40 also supports 10GbE LAN and STM-64.

61

CWDM client in TRP10_4/CMBR40 also supports 10GbE LAN and STM-64.

ECI Telecom Ltd. Proprietary

3-50

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.12 TRP10_4 OTU2/OTU2e/OTU2f Optical Transceivers


OTR10_ELT

OTR10_AT62

Source type

SLM

SLM

Modulation

External, NRZ

External, NRZ

Operating output wavelength (nm)

1529-1561

1529-1560

192.05 + 0.05m

192.05 + 0.05m

m=0 to 79

m=0 to 79

12.5

2.5

Transceiver
Application code

Transmitter
Central frequency (THz)
Maximum central frequency deviation (GHz)
Max. -20 dB width (nm)

<1

Min. side mode suppression ratio (dB)

40

35

Min. mean launched power (dBm)

-1

Max. mean launched power (dBm)

+3

Min. extinction ratio (dB)

12

Sensitivity (BER of 1*10-12) (dBm)

-24

-24

Min. overload (dBm)

-5

-7

Maximum discrete reflectance

-27

-27

Maximum DGD (ps)

30

30

Max. dispersion (ps/nm)

1440

1440

Maximum optical path penalty

OCH switching time (ms)

<3

Receiver

Optical Path

Parent Topic
3.6 Optical Components

62

Not supported in CMBR40.

ECI Telecom Ltd. Proprietary

3-51

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.13 TRP10_4 OTU2/OTU2e Line, STM-64/10G LAN/FC10


Client, AoC, CMBR10, TRP10_LAN, TRP10_2B, OTU2
XFP Line Transceivers and CMBR40B Client
Transceivers
63

OTR10_ASxx

64

Transceiver

OTR10_ALxx

Application code

1L1-2D2F

Source type

SLM

Modulation

External, NRZ

Operating output wavelength (nm)

1529-1560

1529-1560

192.1 + 0.1m

192.1 + 0.1m

m=0 to 40

m=0 to 40

Maximum central frequency deviation (GHz)

12.5

12.5

Max. -20 dB width (nm)

<1

<1

Min. side mode suppression ratio (dB)

30

30

Min. mean launched power (dBm)

-1

Max. mean launched power (dBm)

+3

Min. extinction ratio (dB)

8.2

Sensitivity (BER of 1*10-12) (dBm)

-24

-24

Min. overload (dBm)

-8

-8

Maximum discrete reflectance

-27

-27

Maximum DGD (ps)

30

30

Max. dispersion (ps/nm)

1600

800

Maximum optical path penalty

OCH switching time (ms)

<3

SLM

Transmitter
Central frequency (THz)

Receiver

Optical Path

Parent Topic

3.6 Optical Components


63

CWDM client in TRP10_4/CMBR40 also supports 10GbE LAN and STM-64.

64

CWDM client in TRP10_4/CMBR40 also supports 10GbE LAN and STM-64.

ECI Telecom Ltd. Proprietary

3-52

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.14 AoC, CMBR10, TRP10_LAN, TRP10_2B, OTU2 Line


Transceivers
Transceiver

OTR10T_AL

Application code

1L1-2D2F

Source type

SLM

SLM

Operating output wavelength (nm)

1529-1560

1527-1567

192.05 + 0.05m

192.05 + 0.05m

m=0 to 79

m=0 to 79

Maximum central frequency deviation (GHz)

2.5

Max. -20 dB width (nm)

<1

<1

Modulation

External, NRZ

External, RZ

Spacing (GHz)

50

50

Max. dispersion (ps/nm)

1600

400

Min. side mode suppression ratio (dB)

40

40

Min. mean launched power (dBm)

+4

+1

Max. mean launched power (dBm)

+6

+4

Min. extinction ratio (dB)

10

12

Sensitivity (BER of 1*10-12) (dBm)

-25

-24

Min. overload (dBm)

-8

-4

Maximum optical path penalty

OCH switching time (ms)

<3

<3

Central frequency (THz)

OTX10_ATR

Parent Topic
3.6 Optical Components

ECI Telecom Ltd. Proprietary

3-53

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.15 STM-16/OTU1 Optical SFP Line Transceivers for


OMTR27_2 & OMCM25_4
DWDM line transceivers

OTC25_1PSxx66

OTC25_1ALxx
G.69567

OTR25_AVxx OTR25_ABx OTR16_I3


x

OTR16_S3

OTR16_L3

OTR16_L5

S-C8L1-1D2/5

DW100S\-1
D2/5(C)
DW100S\-1
A2/5(C)

P1I_1D1

P1S1_1D1

P1L1_1D1

L-16.2

G.695
Application code

Continuous client transceivers65

CWDM line transceivers

S-C8S1-1D2/5

DW100L\-1D2/5(C)F
DW100C\-1A2/5(C)F
G.698.1/.2

Source type

SLM

SLM

SLM

SLM

SLM

SLM

SLM

SLM

Operating output
wavelength (nm)

1464-1618

1464-1618

1530-1565

1530-1565

1285-1330

1285-1330

1280-1335

1500-1580

Spacing (nm)

20

20

100

100

NA

NA

NA

NA

Minimum side mode


suppression ratio
(dB)

30

30

30

30

30

30

30

30

Mean launched
power (min.) (dBm)

-9.5

-5

-2

-2

Mean launched
power (max.) (dBm)

+5

+5

-3

+3

+3

Min. extinction ratio


(dB)

8.2

8.2

8.2

8.2

8.2

8.2

8.2

8.2

Sensitivity (BER of
1*10-12) (dBm)

-21.5

-28

-28

-28

-18

-18

-27

-28

(-23 GbE)

(-32 GbE)

(-22 GbE)

(-22 GbE)

(-30 GbE)

(-30 GbE)

Max. dispersion
(ps/nm)

800

1600

2400

3600

1600

(40 km G.652)

(80 km G.652)

(120 km
G.652

(180 km
G.652)

Max. optical path


penalty (dB)

1.5

2.5

<3

<2

<3

<1

OCH switching time


(ms)

<3

<3

<3

<3

<3

<3

<3

<3

Parent Topic
3.6 Optical Components

65

Continuous transceiver (50 Mbps to 2.7 Gbps) including STM16 and OTU1.

66

Continuous transceiver (100 Mbps to 2.7 Gbps), xx designates the transceiver's wavelength in nm.

67

Continuous transceiver (100 Mbps to 2.7 Gbps), xx designates the transceiver's wavelength in nm.

ECI Telecom Ltd. Proprietary

3-54

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.15.1 TRP25_2 2.5 Gbps optical transmitters/receivers for


transponders, and transceivers for combiners
Each TRP25_2 basecard can accommodate any combination of two optical transmitters and receivers.
OMT25_T
+
OMR25C_A/
[OTX27_AT]68
Source type

SLM

Operating output wavelength (nm)

1529-1560

Max. -20 dB width (nm)

<1

Modulation

EA69

Spacing (GHz)

100/5070

Max. dispersion (ps/nm)

3400
(200 km)
[>18000/1000 km]

Min. side mode suppression ratio (dB)

30

Min. mean launched power (dBm)

+. 05 [+5.5]

Max. mean launched power (dBm)

+5 [+7]

Min. extinction ratio (dB)

8.2

Sensitivity (BER of 1*10-12) (dBm)71

-30

Min. overload (dBm)

-8

OCH switching time (msec)

<3

Parent Topic
3.6.15 STM-16/OTU1 Optical SFP Line Transceivers for OMTR27_2 & OMCM25_4

3.6.15.2 TRP40_2B, CMBR40B Line Transceiver


Transceiver
Application code

P1S1-3C2
P1S1-3C3
P1S1-3C5

68

Data between square brackets corresponds to transceiver [OTX27_AT].

69

EA: External Absorption.

70

Spacing is 50 GHz for the OMT25_T only.`

71

Including typical FEC improvement of 2 dB for nonamplified networks. For amplified networks, an FEC improvement of over 4 dB is typical.

ECI Telecom Ltd. Proprietary

3-55

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

Transceiver
Source type

SLM

Operating output wavelength (nm)

1529-1560

Central frequency (THz)

192.05 + 0.05m
m=0 to 79

Maximum central frequency deviation (GHz)

2.5

Max. -20 dB width (nm)

<1

Modulation

RZ-DQPSK

Spacing (GHz)

50

Max. dispersion (ps/nm)

1200

Min. side mode suppression ratio (dB)

40

Min. mean launched power (dBm)

+2

Max. mean launched power (dBm)

+4

Min. extinction ratio (dB)

13

Sensitivity (BER of 1*10-12) (dBm)

-18

Min. overload (dBm)

-7

Maximum optical path penalty

OCH switching time (msec)

<3

Parent Topic
3.6.15 STM-16/OTU1 Optical SFP Line Transceivers for OMTR27_2 & OMCM25_4

3.6.15.3 TRP40_2B Client Transceiver


Transceiver
Application code

VSR2000-3R2
VSR2000-3R3
VSR2000-3R5

Source type

SLM

Modulation

External

Operating output wavelength (nm)

1530-1565

Direct max. -20 dB width (nm)

<1

Min. side mode suppression ratio (dB)

35

Min. mean launched power (dBm)

Max. mean launched power (dBm)

+3

ECI Telecom Ltd. Proprietary

3-56

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

Transceiver
Min. extinction ratio (dB)

8.2

Maximum attenuation (dB)

Minimum attenuation (dB)

Max. dispersion (ps/nm)

40

Minimum optical return loss (dB)

24

Maximum discrete reflectance

-27

Maximum DGD (ps)

7.5

Sensitivity (BER of 1*10-12) (dBm)

-6

Min. overload (dBm)

+3

Maximum optical path penalty

OCH switching time (msec)

<3

Parent Topic
3.6.15 STM-16/OTU1 Optical SFP Line Transceivers for OMTR27_2 & OMCM25_4

3.6.16 OTU-2/OTU-2e/OTU-2f XFP tunable optical


transceivers
Transceiver

OTR10T_AL

Multi-rate

OTU-2/e/f

Source type

SLM

Modulation

External, NRZ

Operating output wavelength (nm)

1529-1560

Transmitter
Central wavelength (nm)

191.70 + 0.05m
m=0 to 87

Maximum central frequency deviation (nm)

2.5

Max. -20 dB width (nm)

<1

Min. side mode suppression ratio (dB)

35

Min. mean launched power (dBm)

-1

Max. mean launched power (dBm)

+3

Min. extinction ratio (dB)

Receiver

ECI Telecom Ltd. Proprietary

3-57

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

Transceiver

OTR10T_AL

Multi-rate

OTU-2/e/f

Sensitivity (BER of 1*10-12) (dBm)

-24

Min. overload (dBm)

-7

Optical Path
Maximum discrete reflectance

-27

Max. DGD (ps)

30

Max. dispersion (ps/nm)

1440

Maximum optical path penalty

OCH switching time (ms)

<3

Parent Topic
3.6 Optical Components

3.6.17 Optical Amplifiers


Width
(slots)

Function/Description

OFA2_I29I29C

Two inline amplifiers with a gain of 29 dB for the C band in a single-slot card

OFA2_I29C

One inline amplifier with a gain of 29 dB for the C band in a single-slot card

OFA2_I23I23C

Two inline amplifiers with a gain of 23 dB for the C band in a single-slot card

OFA2_I23C

One inline amplifier with a gain of 23 dB for the C band in a single-slot card

OFA2_I23I29C

Two inline amplifiers with a gain of 23 dB and 29 dB for the C band in a single-slot card

OFA_RM

High-power 500 mW RAMAN amplifier for long spans, reverse pumped configurations

OFA_HRM

High-power 700 mW RAMAN amplifier for long spans, in reverse pumped


configurations

MO_BAC

Optical booster for the C band

MO_PAC

Optical preamplifier for the C band

MO_BAS

Single-channel optical booster for the C band

MO_PAS

Single-channel optical preamplifier for the C band

MO_OFA_PHBC

High-power dynamic booster and pre-amplifier in E/W configuration for extended


long-haul metro applications. Optimized for ROADM sites.

MO_OFA_HBC

High-power dynamic booster for extended long-haul metro applications.

Card/Module
IO Cards cage

CCP Module cage

ECI Telecom Ltd. Proprietary

3-58

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

Card/Module

Width
(slots)

Function/Description

MO_OFA_PC

15 dBm dynamic gain pre-amp amplifier. CCP Card

MO_OFA_FBC

20 dBm fixed gain booster

MO_OFA_M

High-power dynamic multistage amplifier for extended long-haul and metro


applications

MO_OFA_MH

High power (23 dBm) regional amplifier for high capacity applications

MO_OFA_MHe

High power (23 dBm) regional amplifier for high capacity applications, E/W
configuration

MO_OFA_FHBC

High power (21 dBm) fixed gain booster amplifier with built-in output OSC filter

Parent Topic
3.6 Optical Components

3.6.17.1 OFAs for Single Channel and DWDM Applications


NOTES:

When installed in NPT-1600 and NPT-1600C shelves, the site can be upgraded to a fully
functional OADM site

Rating for gain (dB) does not include the attenuation introduced by the built-in VOA.

Noise figure (dB) does not include the effect introduced by the built-in VOA.
OFA2_I23C/

OFA2_I29C/

OFA2_I23I23C (Inline)

OFA2_I29I29C (Inline)

Max. total power (dBm)

+16

+16

Gain (dB)

Typ. 21

Typ. 27

Spectrum (nm)

1529-1561

1529-1561

Gain flatness (dB)

< 1

< 1

Noise figure (dB)

<6

<6

In/out isolation (dB)

> 40

> 40

Return loss (dB)

< 40

< 40

Power consumption (Watt)

13 (for OFA2_I23C)

13 (for OFA2_I29C)

Power consumption of two amplifiers (Watt)

21 (for OFA2_I23I23C)

21 (for OFA2_I29I29C)

Parent Topic
3.6.17 Optical Amplifiers
ECI Telecom Ltd. Proprietary

3-59

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.17.2 RAMAN and Very High Power EDFA Amplifiers


NOTE: Gain (dB) depends on type of fiber. Actual gain is heavily dependent on splice quality
and actual attenuation of fiber and can be drastically affected.
OFA_RM

OFA_HRM

Max. total power (dBm)

+27

+28.5

Gain (dB)

6-15

10-20

Spectrum (nm)

1529-1561

1529-1561

Gain flatness (dB)

< 0.6

< 0.65

Noise figure (dB)

< -0.5

< -1.5

In/out isolation (dB)

> 40

> 40

Return loss (dB)

< 40

< 40

Parent Topic
3.6.17 Optical Amplifiers

3.6.17.3 CCP Cage OFAs DWDM Applications


MO_OFA_FBC
(Booster)

MO_OFA_PHBC/
MO_OFA_HBC
(Booster)

MO_OFA_PHBC
MO_OFA_PC
(Pre-amp)

MO_OFA_
MH

MO_OFA_M

MO_OFA_FH
BC

MO_OFA_MHe

Max. total power


(dBm)

+20

+20

+15

+23

+20

+21

+23

Gain (dB)

10 to 25

10 to 25

12-27

17-41

17-39

10-23

17-40

Spectrum (nm)

1529-1561

1529-1561

1529-1561

1529-1561

1529-1561

1529-1561

1529-1561

Gain flatness (dB) < 0.75

< 0.6

< 0.6

< 0.75

< 0.75

< 0.5

< 0.5

Noise figure (dB)

<9

<6

<7

< 6.5

< 6.3 Gain >30

Gain >17

Gain >19

Gain >26

Gain >25

< 6.5 +
(23-Gain)

< 6.5 + (25 Gain)


< 14 Gain >17
< 21 Gain 10

< 12.5 Gain


>17

< 6.9 Gain >26


< 13.5 Gain >17

< 19.5 Gain


10

In/out isolation
(dB)

> 30

> 40

> 40

> 40

> 40

> 40

> 40

Return loss (dB)

> 45

< 40

< 40

< 40

< 40

< 45

< 45

Parent Topic
3.6.17 Optical Amplifiers
ECI Telecom Ltd. Proprietary

3-60

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.17.4 CCP Cage OFAs for Single-Channel Applications


MO_BAS (Booster)

MO_PAS
(Preamplifier)

MO_BAC
(Booster)

MO_PAC
(Preamplifier)

Max. total power (dBm)

+15

+12

+17

+12

Gain (dB)

Up to 16

Up to 30

Up to 18

Up to 32

Spectrum (nm)

1529-1561

1529-1561

1529-1561

1529-1561

< 5.5 at Pin 38 dBm

< 1

< 1

Output power deviation


(dB)

< 1

< 2.5 at Pin 26 dBm


< 1.0 at Pin 14 dBm

Noise figure (dB)

< 6.5

< 5.5

<9

< 5.5

In/out isolation (dB)

> 40

> 40

> 40

> 40

Return loss (dB)

< 40

< 40

< 40

< 40

Parent Topic
3.6.17 Optical Amplifiers

3.6.18 Optical Auxiliary Cards and Modules


Card/Module

Function/Description

Cards cage cards


AUX-2I

Auxiliary basecard installed in a single I/O slot. Each basecard accommodates any two of the
modules listed below.

AUX-2X

Auxiliary basecard installed in either the X1 or X2 slot. Each basecard accommodates any
two of the modules listed below.

Modules
OM_4SP50

Four 50/50 splitters

OM_2COSC5

2 x C band/OSC filters (mux + demux) for the 1510 nm supervisory channel

OM_2LCOSC5

2 x C/L/T filters (mux + demux) for the 1510 nm supervisory channel, including provision for
the L band

OM_2RB

2 x red/blue filters

OM_2COSC3

2 x C band/OSC filters (mux + demux) for the 1310 nm supervisory channel

CCP module cage modules (single slot)


MO_ACC4COSC5

Four C/T filters

MO_ACC6CPSP

Six 50/50 splitters + six 50/50 couplers, Single-mode fiber

MO_ACC6CPSP5

Six 50/50 splitters + six 50/50 couplers, multi-mode fiber 50 m

ECI Telecom Ltd. Proprietary

3-61

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

Card/Module

Function/Description

MO_ACC6CPSP6

Six 50/50 splitters + six 50/50 couplers, multi-mode fiber 62.5 m

MO_ACC4COSC3

Four supervisory 1310 nm modules

MO_ACC4RB

Four red/blue filters

Parent Topic
3.6 Optical Components

3.6.19 DCF/DCM Units


Unit

Function/Description

DCF-40-LF

Dispersion compensation fiber for 160 ps/nm (40km LEAF)

DCF-80-LF

Dispersion compensation fiber for 320 ps/nm (80km LEAF)

DCF-120-LF

Dispersion compensation fiber for 485 ps/nm (120km LEAF)

DCF-40-TW

Dispersion compensation fiber for 180 ps/nm (40km TrueWave)

DCF-80-TW

Dispersion compensation fiber for 360 ps/nm (80km TrueWave)

DCF-120-TW

Dispersion compensation fiber for 540 ps/nm (120km TrueWave)

MO_DCM-Lxx

Single-channel dispersion compensation module for 700 ps/nm for channel "xx" for modules cage

MO_DCM-Vxx

Single-channel dispersion compensation module for 1400 ps/nm for channel "xx" for modules cage

MO_DCM-Xxx

Single-channel dispersion compensation module for 1600 ps/nm for channel "xx" for modules cage

Parent Topic
3.6 Optical Components

3.6.20 Rack Mounted Single Channel DCM Units


Unit

Function/Description

RM_DCM2

Rack-mounted tray for up to two single-channel dispersion compensation modules as detailed below

DCM-Lxx

Single-channel dispersion compensation module for 700 ps/nm for channel "xx" for rack-mounted tray

DCM-Vxx

Single-channel dispersion compensation module for 1400 ps/nm for channel "xx" for rack-mounted
tray

DCM-Xxx

Single-channel dispersion compensation module for 1600 ps/nm for channel "xx" for rack-mounted
tray

Parent Topic

3.6 Optical Components


ECI Telecom Ltd. Proprietary

3-62

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.21 Auxiliary Cards and Miscellaneous Accessory Modules


Module type

Insertion loss (dB)

OM_ACC4SP50/ MO_ACC6SP50

OM_ACC2SP95/ MO_ACC4SP95

0.65

OM_2RB/ MO_ACC4RB

Mux

Red 0.7

Blue 1.2

Demux

Red 1.2

Blue 0.7

OM_2COSC3/ MO_ACC4COSC3

Mux/demux

C band 1.2

OSC 1310 nm 1.2

OM_2COSC5/ MO_ACC4COSC5

Mux

C band 0.6

OSC 1510 nm 0.9

Demux

C band 0.9

OSC 1510 nm 1.7

OM_2LCOSC5/MO_ACC4CLOSC5

Mux/demux

C band 1.1

DCF-40-LF

4.8

DCF-80-LF

6.5

DCF-120-LF

8.2

DCF-40-TW

DCF-80-TW

DCF-120-TW

MO_DCM_L_xx/ DCM_L_xx

3.5

L band 1.6

OSC 1510 nm 2.0

MO_DCM_V_xx/ DCM_V_xx
MO_DCM_X_xx/ DCM_X_xx

Parent Topic
3.6 Optical Components

3.6.22 Other Optical Cards


Card

No. of slots

Function/Description

OPM

Optical performance monitoring card for four fiber monitoring points

OMSP

Optical MS protection card

Parent Topic
3.6 Optical Components

ECI Telecom Ltd. Proprietary

3-63

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.6.22.1 OPM Card Specifications


Wavelength range

1529-1562 nm

Power range

-50 to +5 dB

OSNR range

0 to 30 dB

Parent Topic
3.6.22 Other Optical Cards

3.6.22.2 OMSP Card Specifications


Insertion loss through two cards

< 3 dB

Switching time

< 4 ms

Parent Topic
3.6.22 Other Optical Cards

3.7

CWDM Frequencies and Wavelengths (ITU-T


Rec. G.694.2 for CWDM)

Nominal central wavelengths (nm) for spacing of 20 nm

4-channel system

8-channel system

1471

1491

1511

1531

1551

1571

1591

1611

Parent Topic
3 NPT-1600/NPT-1600C Specifications

ECI Telecom Ltd. Proprietary

3-64

NPT Product Line System Specifications

3.8
ITU-T
channel
number

NPT-1600/NPT-1600C Specifications

C Band Channel Frequencies and Wavelengths


(ITU-T Rec. G.694.1 for DWDM)
Sub-band
Blue

Channel center
frequency (THz)

Channel center wavelength


(nm)

Red

17

191.70

1563.86

17.5

191.75

1563.46

18

191.80

1563.05

18.5

191.85

1562.65

19

191.90

1562.24

19.5

191.95

1561.84

20

192.00

1561.44

20.5

192.05

1561.01

21

192.10

1560.61

21.5

192.15

1560.20

22

192.20

1559.79

22.5

192.25

1559.39

23

192.30

1558.98

23.5

192.35

1558.58

24

192.40

1558.17

24.5

192.45

1557.77

25

192.50

1557.36

25.5

192.55

1556.96

26

192.60

1556.55

26.5

192.65

1556.15

27

192.70

1555.75

27.5

192.75

1555.34

28

192.80

1554.94

28.5

192.85

1554.54

29

192.90

1554.13

29.5

192.95

1553.73

30

193.00

1553.33

30.5

193.05

1552.93

31

193.10

1552.52

ECI Telecom Ltd. Proprietary

200 GHz channel


spacing

100 GHz channel spacing 50 GHz channel


spacing

8-ch.

16-ch.

16-ch.

32-ch. 40-ch.

44-ch.

88-ch.

3-65

NPT Product Line System Specifications

ITU-T
channel
number

Sub-band
Blue

Channel center
frequency (THz)

NPT-1600/NPT-1600C Specifications

Channel center wavelength


(nm)

Red

31.5

193.15

1552.12

32

193.20

1551.72

32.5

193.25

1551.32

33

193.30

1550.92

33.5

193.35

1550.52

34

193.40

1550.12

34.5

193.45

1549.72

35

193.50

1549.32

35.5

193.55

1548.91

36

193.60

1548.51

36.5

193.65

1548.11

37

193.70

1547.72

37.5

193.75

1547.32

38

193.80

1546.92

38.5

193.85

1546.52

39

193.90

1546.12

39.5

193.95

1545.72

40

194.00

1545.32

40.5

194.05

1544.92

41

194.10

1544.53

41.5

194.15

1544.13

42

194.20

1543.73

42.5

194.25

1543.33

43

194.30

1542.94

43.5

194.35

1542.54

44

194.40

1542.14

44.5

194.45

1541.75

45

194.50

1541.35

45.5

194.55

1540.95

46

194.60

1540.56

46.5

194.65

1540.16

47

194.70

1539.77

47.5

194.75

1539.37

ECI Telecom Ltd. Proprietary

200 GHz channel


spacing

100 GHz channel spacing 50 GHz channel


spacing

8-ch.

16-ch.

16-ch.

32-ch. 40-ch.

44-ch.

88-ch.

3-66

NPT Product Line System Specifications

ITU-T
channel
number

Sub-band

48

194.80

1538.98

48.5

194.85

1538.58

49

194.90

1538.19

49.5

194.95

1537.79

50

195.00

1537.40

50.5

195.05

1537.00

51

195.10

1536.61

51.5

195.15

1536.22

52

195.20

1535.82

52.5

195.25

1535.43

53

195.30

1535.04

53.5

195.35

1534.64

54

195.40

1534.25

54.5

195.45

1533.86

55

195.50

1533.47

55.5

195.55

1533.07

56

195.60

1532.68

56.5

195.65

1532.29

57

195.70

1531.90

57.5

195.75

1531.51

58

195.80

1531.12

58.5

195.85

1530.72

59

195.90

1530.33

59.5

195.95

1529.94

60

196.00

1529.55

196.05

1529.15

Blue

Channel center
frequency (THz)

NPT-1600/NPT-1600C Specifications

Channel center wavelength


(nm)

Red

60.5

200 GHz channel


spacing

100 GHz channel spacing 50 GHz channel


spacing

8-ch.

16-ch.

16-ch.

32-ch. 40-ch.

44-ch.

88-ch.

Parent Topic
3 NPT-1600/NPT-1600C Specifications

ECI Telecom Ltd. Proprietary

3-67

NPT Product Line System Specifications

3.9

NPT-1600/NPT-1600C Specifications

Physical Specifications

This section describes the physical specifications of the product.

Parent Topic
3 NPT-1600/NPT-1600C Specifications

3.9.1 Dimensions (H x W x D)
NPT-1600

1100 x 450 x 285 mm (43.31 x 17.72 x 11.22 in)

NPT-1600C

775 x 450 x 285 mm (30.51 x 17.72 x 11.22 in)

MECP

120 x 50 x 225 mm (4.72 x 1.97 x 8.86 in)

xMCP-B2G/xMACP-B2G

265 x 25 x 225 mm (10.43 x 0.98 x 8.86 in)

SIO, PIO, and cards cage mux/demux, OADM, 415 x 25 x 225 mm (16.34 x 0.98 x 8.86 in)
transponder, OFA, OPM, MCS5, MCS10
Modules cage connection modules
(electrical), mux/demux, OADM, OFA

265 x 40 x 175 mm (10.43 x 1.57 x 6.89 in)

ME_12

291 x 38.7 x 139.5 mm (11.46 x 1.52 x 5.49 in)

Heat buffer

125 x 450 x 285 mm (4.92 x 17.72 x 11.22 in)

Racks

2200/2600 x 600 x 300 mm (86.61/102.36 x 23.62 x 11.81 in)


2134 x 584 x 305 mm (82 x 23 x 12 in)

Parent Topic
3.9 Physical Specifications

3.9.2 Weight
NPT-1600

25 kg (55.12 lbs)

NPT-1600 fully populated

70 kg (154.32 lbs)

NPT-1600C

20 kg (44.09 lbs)

NPT-1600C fully populated

50 kg (110.23 lbs)

Parent Topic
3.9 Physical Specifications

3.9.3 Floor Loading


Floor loading of fully equipped rack

7.35 kn/m2

Parent Topic
3.9 Physical Specifications
ECI Telecom Ltd. Proprietary

3-68

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.9.4 Power
This section describes the power requirements, power supply, power consumption and heat dissipation of
the product.

Parent Topic
3.9 Physical Specifications

3.9.4.1 Power Requirements


Applicable specifications

ETSI 300 132-2; FTZ 19FS1

Input voltage

-40 V DC to -75 V DC

Nominal power source

-60 V or -48 V BTNR 2511

Parent Topic
3.9.4 Power

3.9.4.2 Power Supply Lines Surge Voltage


Applicable specification

EN61000-4-5:1996

Line to line maximum surge voltage

2000 V

Line to ground maximum surge voltage

4000 V

Parent Topic
3.9.4 Power

3.9.4.3 Power Consumption


NPT-1600

Typical 1200 W, maximum 3200 W

NPT-1600C

Typical 1200 W, maximum 3200 W

Parent Topic
3.9.4 Power

ECI Telecom Ltd. Proprietary

3-69

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.9.4.4 Main Equipment Power Consumption


The following table lists the power requirements of the main equipment components. Determine the
expected power requirement of the equipment installed in the shelf, and compare it with the shelf
capabilities.

NOTE: The listed power requirements do not include the power required by modules that
may be installed on the card.

Type

Component

Power requirements

Common cards

xMCP-B2G

20 W

xMACP-B2G

43 W

MECP

15 W

MECP_OSC

20 W

CPTS240

275 W

xFCU-B

130 W

xINF-80A

20 W

PIO2_84

45 W

PIO2_84F

33 W

M2_84 (all versions)

3W

PIO345_16 (all versions)

80 W

M345P_16P

10 W

M345_16

3W

M345_8

2W

SIO1&4

48 W

SIO1&4B

86 W

OMS01_4

4W

OM01_4

4W

OMS04_1

1W

OM04_1

1W

M1_8

5W

M1_16

5W

M1_16P

3W

SIO16_2

60 W

SIO16_2B

83 W

SIO16_4B

96 W

PDH cards

STM1 and STM4 cards

STM16 cards

ECI Telecom Ltd. Proprietary

3-70

NPT Product Line System Specifications

Type

STM64 cards

MCS cards

ROADM cards

CCP OADM modules

I/O OADM modules

ECI Telecom Ltd. Proprietary

NPT-1600/NPT-1600C Specifications

Component

Power requirements

SIO16_8

148 W

OM16_1SFP

Per spec

OMSC16_4

10 W

OM16_1

20 W

SIO64_1, SIO64_1M

125 W

SIO64_1-MF

135 W

SIO64B

106 W

SIO64_2

162 W

SIO164

80 W

SIO164, OMSC16_4

83 W

SIO164 OMTX10

82 W

OMTX10_EF

15.5 W

OM10_1

10 W

OM64_1, OM10_1xx

18 W

MCS5

100 W

MCS10

115 W

MCS30_X10G

125 W

MCS50_SX_10G

130 W

ME16

18 W

ME_12

13 W

MO_ROADM8D

15.5 W

MO_ROADM8A

25 W

MO_ROADM8A_50

25 W

MO_ROADM2A

24 W

MO_ROADM2A_50

24 W

MO_CW2

4.5 W

OM_CWM8C

4.8 W

OM_CWD8C

5.8 W

OM_CWMD4C

4.8 W

OM_CWMD4CE

4.8 W

OM_CWMD4SL

4.8 W

OM_OADM4GEW

5W

OADM4_EW

5W

OM_AD4RQEWxx

5W

3-71

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

Type

Component

Power requirements

DWDM modules

MO_DW16MDR-AVAV

10 W

MO_DW16MDRE-AVAV

10 W

MO_DW16MDB-AVAV

10 W

MO_DW16MDR-SAV

4.8 W

MO_DW16MDRE-SAV

4.8 W

MO_DW16MDB-SAV

4.8 W

MO_DW40MC-S

1W

MO_DW40MC-A

4.8 W

MO_DW40DC-A

4.8 W

MO_DW40VMD/E/I

47 W

AUX_2IO

15 W

AUX_2X

15 W

Each plug-in

1W

OPM

OPM

15 W

OMSP

OMSP

10 W

Accessory modules

Each MO_ACC

1W

Miscellaneous and Pluggable modules

OTX10_ALxx

15 W

OTR103_SR/LR/ER, OTR64_PI3/PS5/AL5

3.5 W

OTR10T_AL

15 W

OTR10_ELT

7W

OTR10_ALxx/ASxx

3.5 W

OTC10_ALxx/PSxx

3.5 W

OTR25_AVxx/ABxx

2W

OTC25_ALxx/PSxx

1.5 W

OTR10_AT

3.5 W

OTR1_S3/L3/L5

1W

OTR4_S3/L3/L5

1W

OTR16_I3/S3/L3/L5

1W

OTGBE_SX/LX/ZX

1W

OTX27_AT

4W

AUX cards

Parent Topic
3.9.4 Power

ECI Telecom Ltd. Proprietary

3-72

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.9.4.5 Heat Dissipation


NPT-1600

Typical 4094 Btu/hr, maximum 10918 Btu/hr

NPT-1600C

Typical 4094 Btu/hr, maximum 10918 Btu/hr

Parent Topic
3.9.4 Power

3.10 Environmental Conditions


This section describes the environmental conditions required for the operation, storage, handling and
transportation of the product.

Parent Topic
3 NPT-1600/NPT-1600C Specifications

3.10.1 Operation
Applicable specification

ETSI-300-019-1-3 Class 3.1

Temperature range

-5 C to +55 C

Relative humidity

5% to 90%

Parent Topic
3.10 Environmental Conditions

3.10.2 Storage (Packed)


Applicable specification

ETS-300-019-2-1 Class 1.2

Temperature range

-40 C to +70 C

Relative humidity

10% to 100%

Parent Topic
3.10 Environmental Conditions

3.10.3 Handling and Transportation


Applicable specification

ETS-300-019-2-2 Class 2.2

Temperature range

-40 C to +70 C

Relative humidity

up to 95%

Parent Topic
3.10 Environmental Conditions

ECI Telecom Ltd. Proprietary

3-73

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.11 EMC
Applicable specifications

EMC directive 89/336, (including EN 300 386-2: 1997, Class B, emission and
immunity requirements)

Parent Topic
3 NPT-1600/NPT-1600C Specifications

3.12 Safety
Applicable specifications

EN 60950 edition 2 (including A1/1992, A2/1993, A3/1995, A4/1996); EN


41003

CE safety

LVD directive 73/23/EEC

Parent Topic
3 NPT-1600/NPT-1600C Specifications

3.12.1 Laser Safety


Applicable specification

EN 60825-1&2 (including A1/1997) (AS/NZS 2211.2)

Parent Topic
3.12 Safety

3.12.2 NEBS Compliance


The NPT platform complies with NEBS regulations for EMC and Safety, including GR-1089-CORE Issue 1,
October 1995 and GR-63-CORE Issue 2, December 1997 with Revision 1, February 1999 (Level 3).

Parent Topic
3.12 Safety

3.13 Reliability
This section describes the reliability of the <product1/product2> platform with respect to the product life
and service availability.

Parent Topic
3 NPT-1600/NPT-1600C Specifications

ECI Telecom Ltd. Proprietary

3-74

NPT Product Line System Specifications

NPT-1600/NPT-1600C Specifications

3.13.1 Life
15 years

Expected lifetime of the NPT platforms

Parent Topic
3.13 Reliability

3.13.2 Availability
Availability of service for an end-to-end service
trail passing through a protected SDH network

better than 99.999%

Parent Topic
3.13 Reliability

3.14 Management Specifications


Applicable specifications

G.784, G.774, M.3010, M.3100

LightSoft server and client for


managing all ECI equipment

on SUN workstation(s)

EMS-MPT

on SUN workstation

LCT-MPT local craft terminal

on PC

EMS-MPT and LightSoft can work on the same SUN workstation.

Parent Topic

3 NPT-1600/NPT-1600C Specifications

3.14.1 Management and Alarm Interfaces


CMIP-like over TCP/IP to EMS-MPT; MTNM from EMS-MPT to LightSoft or other TMN; RS-232 to LCT-MPT;
OverHead Access (OHA) and external alarms; orderwire; RAP.

Parent Topic

3.14 Management Specifications

3.14.2 Alarms and Performance


Performance concept

G.821, G.826

Alarm concept

G.783

Alarm types

LED indicators, dry contacts, audible alarms (per subrack)

Alarm classes

Critical, Major, Minor

Parent Topic

3.14 Management Specifications

ECI Telecom Ltd. Proprietary

3-75

NPT-1200 Specifications

4.1

Cross-Connect Specifications

This section describes the cross-connect specifications for the NPT-1200.

Parent Topic
4 NPT-1200 Specifications

4.1.1 Cross-Connect Levels


Cross-connect levels

VC-4-64c, VC-4-16c, VC-4-4c, VC-4, VC-3, VC-12

NOTE: The following rules apply for the NPT-1200:


VC-4-4c and VC-4-16c support full capabilities, including XC, SNCP, PM, alarms, and
maintenance.
VC-4-64c supports only XC.

Parent Topic
4.1 Cross-Connect Specifications

4.1.2 Cross-Connect Capacity


ADM-64 cross-connect capacity

256 x STM-1 with cross-connect capability of VC-4c/4/3/12

MADM-16 cross-connect
capability

256 x STM-1 with cross-connect capability of VC-4c/4/3/12

Parent Topic
4.1 Cross-Connect Specifications

4.1.3 Switching Specifications


Switching capacity

100 Gbps

MPLS processing (IMIX)

72 Gbps

Parent Topic
4.1 Cross-Connect Specifications

ECI Telecom Ltd. Proprietary

4-1

NPT Product Line System Specifications

NPT-1200 Specifications

4.1.4 NPT-1200 Shelf Capacity


NPT-1200 shelf slot TDM capacities are evenly distributed between all I/O slots using different types of
matrix cards (XIO64, XIO16_4). XIO64 and XIO16_4 have a cross connect capability of 40 Gbps each.
The bandwidth allocation capacity per I/O slot in the NPT-1200 in reference with the XIO cards used is
described in the following table.
Table 4-1: NPT-1200 TDM capacity per I/O slot
XIO type

Slot #

Capacity per slot

NPT-1200 total capacity

XIO64

TS1 to TS7

2.5 Gbps

40 Gbps

or
XIO16_4
An NPT-1200 shelf Packet slot capacity is evenly distributed between all I/O slots using different types of
matrix cards (CPTS100, CPS100).The CPTS100 and CPS100 have a packet switching capability of 100 Gbps
each.
The bandwidth allocation capacity per I/O slot in the NPT-1200 in reference with the CPTS/CPS cards used is
described in the following table.
Table 4-2: NPT-1200 packet capacity per I/O slot
Packet switching card
type

Slot #

Capacity per slot

CPTS100

TS1 to TS7 (excluding TS5) 20 Gbps

NPT-1200 total capacity


100 Gbps

or
CPS100

Parent Topic
4.1 Cross-Connect Specifications

ECI Telecom Ltd. Proprietary

4-2

NPT Product Line System Specifications

4.2

NPT-1200 Specifications

Traffic Protection

Applicable specifications

ITU-T G.841, G.842

SNCP I/N HO

within 10 ms

SNCP I/N LO

within 10 ms

MSP 1+1

within 30 ms

ERPS

within 50 ms

LSP 1:1 linear protection

within 50 ms

FRR (Fast ReRoute)

within 50 ms

Dual FRR

within 50 ms

LAG 1:1

within 50ms (static)


within 100ms (LACP)

PW redundancy

within 50 ms

Parent Topic
4 NPT-1200 Specifications

4.3

Redundancy

DC power system

INF-1200/INF-E2U 1+1 redundancy

Switching

CPTS 1+1 redundancy


CPS 1 + 1 redundancy

Cross-connect matrix

XIO64 1+1 redundancy


XIO16_4 1 + 1 redundancy
CPTS 1+1 redundancy

TMU

XIO64 1+1 redundancy


XIO16_4 1 + 1 redundancy
CPTS100 1+ 1 redundancy
CPS100 1+1 redundancy

1588v2

CPTS 1+1 redundancy


CPS 1 + 1 redundancy

Parent Topic
4 NPT-1200 Specifications

ECI Telecom Ltd. Proprietary

4-3

NPT Product Line System Specifications

4.4

NPT-1200 Specifications

Tributary Protection

Protection switch time

less than 50 ms

E1 cards

1:1 for PE1_63 and PME1_63

STM-1e cards

1:1 for S1_4

E3/DS-3 cards

1:1 for P345_3E

Layer 2 cards

1:1 for DMGE_4_L2 with optical and/or copper ports


1:1 for DMGE_8_L2 with optical and/or copper ports
1:1 for DMGE_2_L2 with optical ports
1:1 for DMXE_48_L2 with optical and/or copper ports
1:1 for DMXE_22_L2 with optical and/or copper ports

Parent Topic
4 NPT-1200 Specifications

4.5

Synchronization

There are five types of timing references available from SDH/PDH multiple timing sources:

From any 2 Mbps/2.048 Mhz/E1 PDH tributary interface

From any SDH line

From any GbE/10GbE port which supports synchronous Ethernet

An external input of 2 MHz and 2 Mbps

G.813 internal clock

1588v2 Boundary Clock (on CPTS100, CPS100 ) and Ordinary Clock (on CPTS100, CPS100,
DMXE_48_L2 and DMXE_22_L2)

Synchronization Status Marker (SSM) is provided

Parent Topic
4 NPT-1200 Specifications

4.6

IEEE 1588v2 Specification

Supported types of 1588v2 PTP Clock

Ordinary clock (master or slave)


Boundary clock (BC)
Two-step E2E Transparent Clock (TC)

Grandmaster work mode

Unicast, two-step

Maximal aggregated unicast packet rate of OC master

2000 pps

Max number of slave clocks supported per master

6472

72

Depends on the network conditions and PTP protocol configuration, and limited by 2000 pps budget.

ECI Telecom Ltd. Proprietary

4-4

NPT Product Line System Specifications

NPT-1200 Specifications

Synchronization source of master

1PPS/ToD
System clock (T0 of SEC/EEC TMU)
Any Sync-E port of central PE
Local OCXO

Synchronization transport

Frequency
Phase (with 1PPS) and time (with ToD)

Type of PTP clock interface

1 x 1PPS
1 x ToD

Connector type of 1PPS and ToD interface

RJ-45

Electrical characteristic of 1PPS and ToD interface

RS-422/V.11

PTP message encapsulation

UDP/IPv4

ToD message format

GPRMC

Standards compliance

IEEE 1588v2

Parent Topic

4 NPT-1200 Specifications

4.7

Throughput Test - RFC2544

Number of RFC2544 test port

Max test rate

1000Mbps (NPT-1200 with CPTS100/CPS100)

Test rate granularity

64Kbps~960Kbps@64Kbps, 1Mbps~Max rate@100Kbps

Transmit frame size

Fixed (64~1522B)
IMIX
Standard IMIX
G.8261 IMIX1
G.8261 IMIX2
User defined IMIX

IMIX types

Performance test

4.8

Frame loss (Latency and jitter test is not supported)

Acoustic Noise

Acoustic noise

62 dBA

Parent Topic
4 NPT-1200 Specifications

ECI Telecom Ltd. Proprietary

4-5

NPT Product Line System Specifications

4.9

NPT-1200 Specifications

Jitter and Wander

Applicable specifications ITU T G.823, G.825

Parent Topic
4 NPT-1200 Specifications

4.10 I/O Interfaces


This section describes the specifications for the I/O interfaces.

Parent Topic
4 NPT-1200 Specifications

4.10.1 2.048 Mbps (E1)


Physical level

G.703, Paragraph 6/s 50ppm

Frame options

Unframed, framed (ITU-T G.704)

Line code

HDB3

Line impedance

120 balanced 5%

Parent Topic
4.9 I/O Interfaces

4.10.2 1.544 Mbps (T1)


Physical level

ANSI T1.403-1999

Frame options

Unframed, framed (ANSI T1.107-2002 [R2006])

Line code

AMI/B8ZS

Line impedance

100 balanced

Parent Topic
4.9 I/O Interfaces

4.10.3 34 Mbps (E3)


Physical level

G.703, Paragraph 8

Frame

Unframed

Line code

HDB3

Line impedance

75 W unbalanced

Parent Topic
4.9 I/O Interfaces
ECI Telecom Ltd. Proprietary

4-6

NPT Product Line System Specifications

NPT-1200 Specifications

4.10.4 45 Mbps (DS3)


Physical level

G.703, Paragraph 5

Frame

Unframed

Line code

B3ZS

Line impedance

75 W unbalanced

Parent Topic
4.9 I/O Interfaces

4.10.5 STM-1 Electrical


Physical level

G.703, Paragraph 12

Bitrate

155.52 Mbps 20 ppm

Frame

G.707

Line code

CMI

Parent Topic
4.9 I/O Interfaces

4.10.6 STM-1 Optical


Physical level

G.957, Table 2

Wavelength

1310 nm, 1550 nm

Bitrate

155.52 Mbps 4.6 ppm

Transmission range

S3, L3, L5, X3, X5, VL5

Parent Topic
4.9 I/O Interfaces

4.10.7 STM-4 Optical


Physical level

G.957, Table 3

Wavelength

1310 nm, 1550 nm

Bitrate

622 Mbps 4.6 ppm

Transmission range

S3, L3, L5, V5

Parent Topic
4.9 I/O Interfaces

ECI Telecom Ltd. Proprietary

4-7

NPT Product Line System Specifications

NPT-1200 Specifications

4.10.8 STM-16 Optical


Physical level

G.957, Table 3

Wavelength

1310 nm, 1550 nm

Bitrate

622 Mbps 4.6 ppm

Transmission range

S3, L3, L5, V5

Parent Topic

4.9 I/O Interfaces

4.10.9 STM-64 Optical


Physical level

G.691, G.957, Table 5

Wavelength

1310 nm, 1550 nm


Short-haul, long-haul, very long-haul,
DWDM (G.694.1) and CWDM

Bitrate

9953.28 Mbps 4.6 ppm

Parent Topic

4.9 I/O Interfaces

4.11 Management
Applicable specifications

G.784, G.774, M.3010, M.3100

LightSoft (ECI Telecom Network


Manager) server and client for
managing all ECI Telecom
equipment

on SUN workstation(s)

EMS-APT (element manager)

on PC or SUN workstation(s)

LCT-APT (local craft terminal)

on PC

Parent Topic

4 NPT-1200 Specifications

4.11.1 Management and Alarm Interfaces


CMIP-like over TCP/IP to EMS-APT
SNMP V3 to third-party SNMP-based management solution (monitoring only)
MTNM from EMS-APT to LightSoft or other TMN
10/100BaseT to LCT-APT
OverHead Access (OHA)
Orderwire
Rack Alarm Panel

Parent Topic

4.10 Management
ECI Telecom Ltd. Proprietary

4-8

NPT Product Line System Specifications

NPT-1200 Specifications

4.11.2 Management Communication Channel


MCC Interfaces

Management LAN interface for DCN


RS-DCC, MS-DCC, E1 clear channel for SDH network
In-band MCC for Ethernet/MPLS network
GCC for OTN network

IP & Routing protocol

IPv4
OSPFv2

Interface types

Numbered, unnumbered

Link Layer Encapsulation

IEEE 802.3 Ethernet For management port or in-band MCC


LAN emulation over HDLC For DCC
PPP over HDLC For DCC or GCC
IEEE 802.1q For in-band MCC
IEEE 802.1ad For in-band MCC

DCC processing capacity

10 Mbps

Maximum number of DCC channels

32 x RS-DCC (192 Kbps), 32 x MS-DCC (576 Kbps)

In-band MCC processing capacity

10 Mbps

Maximum number of MCC channels

16

MCC bandwidth per interface

256 Kbps~4 Mbps@ 256Kbps

Maximum number of GCC channels

6 (only MXP10 OTU2/OTU2e ports support GCC)

GCC termination type

GCC0, GCC1, GCC2

Clear channels

2 x E1 clear channel
Framed or unframed

Parent Topic
4.10 Management

4.11.3 Alarms and Performance


Performance concept

ITU-T G.821, G.826, Bellcore GR-820-CORE

Alarm concept

G.783

Alarm types

LED indicators, dry contacts,


(per subrack), external alarm inputs and outputs

Alarm classes

Critical, Major, Minor, Warning

Parent Topic
4.10 Management

ECI Telecom Ltd. Proprietary

4-9

NPT Product Line System Specifications

NPT-1200 Specifications

4.12 SDH Interfaces


This section describes the specifications for the SDH interfaces.

Parent Topic
4 NPT-1200 Specifications

4.12.1 STM-1 (155.52 Mbps 4.6 ppm)


Table 4-3: STM-1 interface
SFP transceiver name

OTR1_S3

OTR1_L3

OTR1_L5

OTR1_X3

OTR1_X5

OTR1_VL5

OTR1_VLC5

Application code73

S-1.1

L-1.1

L-1.2

Operating wavelength (nm)

1261-1360

1263-1360

1480-1580

1270-1360

1500-1520

1500-1520

1544.5-1557.5

Source type

MLM

SLM

SLM

SLM

SLM

SLM

SLM

Max. RMS width (nm)

7.7

Min. side mode suppression ratio (dB)

30

30

30

> 30

> 30

30

Min. mean launched power (dBm)

-15

-5

-5

+5

Max. mean launched power (dBm)

-8

+5

+5

Min. extinction ratio (dB)

8.2

10

10

10

10

10

10

Min. sensitivity (BER of 1 * 10-12) EOL (dBm) -28

-34

-34

-37

-35

-42

-42

Min. overload (dBm)

-8

-10

-10

-8

-8

-5

-7

Max. receiver reflectance (dB)

-25

Max. dispersion (ps/nm)

96

Min. optical return loss of cable (dB)

-20

-20

Max. discrete reflectance (dB

-25

-25

-25

Max. optical path penalty (dB)

TRANSMITTER

RECEIVER74

OPTICAL PATH BETWEEN S & R

NOTE:

When selecting bidirectional transceivers, pay attention that they must operate in
complementary pairs. For example: OTR1-S3BD can work only vis-a-vis OTR1-S5BD;
OTR4-L3BD can work only vis-a-vis OTR4-L5BD, and so on. The transceivers in the following
table are arranged in complementary pairs.

73

Application code is in reference to ITU-T Recommendation G.691.

74

Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.

ECI Telecom Ltd. Proprietary

4-10

NPT Product Line System Specifications

NPT-1200 Specifications

Table 4-4: STM-1 bidirectional transceivers


SFP transceiver name

OTR1-S3BD

OTR1-S5BD

OTR1-L3BD

OTR1-L5BD

OTR1-X49BD

OTR1-X59BD

Application code75

BD 376

BD 577

L3BD

L5BD

X49BD

X59BD

Operating wavelength (nm)

1260-1360

1480-1580

1280-1360

1480-1580

1460-1500

1580-1620

Source type

MLM

MLM

MLM

SLM

SLM

SLM

Max. RMS width (nm)

Min. side mode suppression ratio (dB)

30

30

30

Min. mean launched power (dBm)

-14

-14

-5

-5

-5

-5

Max. mean launched power (dBm)

-8

-8

Min. extinction ratio (dB)

10

10

10

10

10

10

Min. sensitivity (BER of 1 * 10-12) EOL (dBm)

-32

-32

-32

-32

-34

-34

Min. overload (dBm)

-8

-8

Max. receiver reflectance (dB)

Max. dispersion (ps/nm)

Min. optical return loss of cable (dB)

-20

-20

Max. discrete reflectance (dB)

Max. optical path penalty (dB)

TRANSMITTER

RECEIVER78

OPTICAL PATH BETWEEN S & R

Parent Topic

4.11 SDH Interfaces

4.12.2 STM-4 (622 Mbps 4.6 ppm)


Table 4-5: STM-4 transceivers
SFP transceiver name
Application code

79

Operating wavelength (nm)

OTR4_S3

OTR4_L3

OTR4_L5

OTR4_V5

OTR4_LC5

S 4.1

L 4.1

L 4.2

V5

LC5

1293-1334

1296-1330

1480-1580

1550

1551

1274-1356

1300-1325

75

Application code is in reference to ITU-T Recommendation G.691.

76

BD 3: STM-1 single-fiber bidirectional SFP module with a 1310 nm TX wavelength.

77

BD 5: STM-1 single-fiber bidirectional SFP module with a 1550 nm TX wavelength.

78

Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.

79

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

4-11

NPT Product Line System Specifications

SFP transceiver name

NPT-1200 Specifications

OTR4_S3

OTR4_L3

OTR4_L5

OTR4_V5

OTR4_LC5

S 4.1

L 4.1

L 4.2

V5

LC5

Source type

MLM

MLM

SLM

SLM

CWDM

Max. RMS width (nm)

4/2.5

Max. -20 dB width (nm)

<1

Min. side mode suppression ratio (dB)

30

30

30

30

Min. mean launched power (dBm)

-15

-3

-3

-1

Max. mean launched power (dBm)

-8

+2

+2

Min. extinction ratio (dB)

8.2

10

10

10

10

Min. sensitivity (BER of 1 * 10-12) EOL (dBm)

-28

-28

-28

-34

-29

Min. overload (dBm)

-8

-8

-8

-8

Max. receiver reflectance (dB)

-14

-27

-27

-27

Max. dispersion (ps/nm)

46/74

92/109

1600

2400

1600

Min. optical return loss of cable (dB)

20

24

Max. discrete reflectance (dB)

-25

-27

Max. optical path penalty (dB)

Application code

79

TRANSMITTER

80

RECEIVER

OPTICAL PATH BETWEEN S & R

NOTE:

When selecting bidirectional transceivers, pay attention that they must operate in
complementary pairs. For example: OTR1-S3BD can work only vis-a-vis OTR1-S5BD;
OTR4-L3BD can work only vis-a-vis OTR4-L5BD, and so on. The transceivers in the following
table are arranged in complementary pairs.

NOTE:

OTR16 bidirectional SFPs (in the following table) are multirate transceivers that
support both STM-4 and STM-16.

Table 4-6: STM-4 bidirectional transceivers


SFP transceiver name
Application code

81

OTR4_S3BD OTR4_S5BD OTR4_L3BD OTR4_L5BD OTR16_X49BD OTR16_X59BD


S3BD

S5BD

80

Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.

81

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

L3BD

L5BD

X49BD

X59BD

4-12

NPT Product Line System Specifications

SFP transceiver name


Application code

81

NPT-1200 Specifications

OTR4_S3BD OTR4_S5BD OTR4_L3BD OTR4_L5BD OTR16_X49BD OTR16_X59BD


S3BD

S5BD

L3BD

L5BD

X49BD

X59BD

1260-1360

1480-1580

1260-1360

1480-1580

1460-1500

1560-1620

Source type

MLM

SLM

MLM

SLM

SLM

SLM

Max. RMS width (nm)

Min. side mode suppression ratio (dB)

30

30

30

30

Min. mean launched power (dBm)

-15

-15

-3

-3

-2

-2

Max. mean launched power (dBm)

-8

-8

+2

+2

+3

+3

Min. extinction ratio (dB)

8.2

8.2

10

10

8.2

8.2

Min. sensitivity (BER of 1 * 10-12) EOL


(dBm)

-28

-28

-28

-28

-28

-28

Min. overload (dBm)

-8

-8

-8

-8

-6

-6

Max. receiver reflectance (dB)

-27

-27

Operating wavelength (nm)


TRANSMITTER

82

RECEIVER

OPTICAL PATH BETWEEN S & R


Max. dispersion (ps/nm)
Min. optical return loss of cable (dB)

Max. discrete reflectance (dB)

Max. optical path penalty (dB)

Parent Topic
4.11 SDH Interfaces

4.12.3 STM-16 (2488 Mbps 4.6 ppm)


Table 4-7: STM-16 transceivers
SFP transceiver name

OTR16-S3

OTR16-L3

OTR16-L5

Application code83

S-16.1

L-16.1

L-16.2

Operating wavelength (nm)

1260-1360

1280-1335

1500-1580

TRANSMITTER

82

Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.

83

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

4-13

NPT Product Line System Specifications

NPT-1200 Specifications

SFP transceiver name

OTR16-S3

OTR16-L3

OTR16-L5

Application code83

S-16.1

L-16.1

L-16.2

Source type

SLM

SLM

SLM

Max. RMS width (nm)

Max. -20 dB width (nm)

<1

Min. side mode suppression ratio (dB)

30

30

30

Min. mean launched power (dBm)

-5

-2

-2

Max. mean launched power (dBm)

+3

+3

Min. extinction ratio (dB)

8.2

8.2

8.2

Min. sensitivity (BER of 1 * 10-12) EOL (dBm)

-18

-27

-28

Min. overload (dBm)

-9

-9

Max. receiver reflectance (dB)

-27

-27

-27

Max. dispersion (ps/nm)

1600

Min. optical return loss of cable (dB)

-24

-24

-24

Max. discrete reflectance (dB)

-27

-27

-27

Max. optical path penalty (dB)

RECEIVER84

OPTICAL PATH BETWEEN S & R

NOTE:

When selecting bidirectional transceivers, pay attention that they must operate in
complementary pairs. For example: OTR1-S3BD can work only vis-a-vis OTR1-S5BD;
OTR4-L3BD can work only vis-a-vis OTR4-L5BD, and so on. The transceivers in the following
table are arranged in complementary pairs.
Table 4-8: STM-16 bidirectional transceivers
SFP transceiver name

OTR16_S3BD

OTR16_S5BD

OTR16_L3BD

OTR16_L5BD

OTR16_X49BD

OTR16_X59BD

Application code85

S3BD

S5BD

L3BD

L5BD

X49BD

X59BD

Operating wavelength
(nm)

1260-1360

1480-1580

1260-1360

1480-1580

1460-1500

1560-1620

Source type

SLM

SLM

SLM

SLM

SLM

SLM

Max. RMS width (nm)

Min. side mode


suppression ratio (dB)

30

30

30

30

30

30

TRANSMITTER

84

Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.

85

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

4-14

NPT Product Line System Specifications

NPT-1200 Specifications

SFP transceiver name

OTR16_S3BD

OTR16_S5BD

OTR16_L3BD

OTR16_L5BD

OTR16_X49BD

OTR16_X59BD

Application code85

S3BD

S5BD

L3BD

L5BD

X49BD

X59BD

Min. mean launched


power (dBm)

-5

-5

-2

-2

-2

-2

Max. mean launched


power (dBm)

+2

+2

+5

+5

+3

+3

Min. extinction ratio


(dB)

8.2

8.2

8.2

8.2

8.2

8.2

Min. sensitivity (BER of


1 * 10-12) EOL (dBm)

-18

-18

-27

-27

-28

-28

Min. overload (dBm)

-9

-9

-7

-7

Max. receiver
reflectance (dB)

-27

-27

RECEIVER86

OPTICAL PATH BETWEEN S & R


Max. dispersion
(ps/nm)
Min. optical return loss
of cable (dB)

Max. discrete
reflectance (dB)

Max. optical path


penalty (dB)

Parent Topic
4.11 SDH Interfaces

4.12.4 CWDM and DWDM STM-16/GbE (2488 Mbps 4.6


ppm)
Table 4-9: CWDM and DWDM STM-16/GbE interfaces
CWDM
SFP transceiver name

OTC25_PSxx

DWDM
OTC25_ALxx

Application code

OTR25_Avxx

OTR25_ABxx

DW100S1D2/5(C)

DW100L- 1D2/5(C)F

DW100S1A2/5(C)

DW100C- 1A2/5(C)F
G.698.1/.2

Operating wavelength (nm)

86

1464-1618

1464-1618

1530-1565

1530 1565

Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.

ECI Telecom Ltd. Proprietary

4-15

NPT Product Line System Specifications

NPT-1200 Specifications

CWDM
SFP transceiver name

OTC25_PSxx

DWDM
OTC25_ALxx

Application code

OTR25_Avxx

OTR25_ABxx

DW100S1D2/5(C)

DW100L- 1D2/5(C)F

DW100S1A2/5(C)

DW100C- 1A2/5(C)F
G.698.1/.2

TRANSMITTER
Source type

SLM

SLM

SLM

SLM

Max. RMS width (nm)

Max. -20 dB width (nm)

0.4

Min. side mode suppression ratio (dB)

30

30

30

30

Min. mean launched power (dBm)

Max. mean launched power (dBm)

+5

+5

+4

+4

Min. extinction ratio (dB)

8.2

8.2

8.2

8.2

Min. sensitivity (BER of 1 * 10-12) EOL (dBm)

-21.5

-28

-28

-28

Min. overload (dBm)

-7

-9

Max. receiver reflectance (dB)

-27

-27

-27

800

1600

2160

3600

(40 km)

(80 km)

(120 km)

(180 km)

Min. optical return loss of cable (dB)

-24

-24

-24

Max. discrete reflectance (dB)

-27

-27

-27

Max. optical path penalty (dB)

1.5

2.5

<3

<3

RECEIVER87

OPTICAL PATH BETWEEN S & R


Max. dispersion (ps/nm)

Parent Topic
4.11 SDH Interfaces

4.12.5 STM-64 (9953.28 Mbps 4.6 ppm)


Table 4-10: STM-64 non-colored interface (XFPs)
XFP TRANSCEIVER NAME

87

OTR64_PI3

OTR64_PS5

OTR64_AL5

OTR64I_PI388

OTR64I_PS589

Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.

88

The OTR64I_PI3 and OTR64I_PS3 have respectively, the same parameters as the OTR64_PI3 and OTR64_PS3, but feature an extended operating
temperature range from -40C to +85C.
89

The OTR64I_PI3 and OTR64I_PS3 have respectively, the same parameters as the OTR64_PI3 and OTR64_PS3, but feature an extended operating
temperature range from -40C to +85C.

ECI Telecom Ltd. Proprietary

4-16

NPT Product Line System Specifications

NPT-1200 Specifications

XFP TRANSCEIVER NAME

OTR64_PI3

OTR64_PS5

OTR64_AL5

OTR64I_PI388

OTR64I_PS589

APPLICATION CODE90

I-64.1

S-64.2b

L-64.2a

I-64.1

S-64.2b

P1I1_2D1

P1S1_2D2b

P1L1-2D2

P1I1_2D1

P1S1_2D2b

VSR2000_2R1

VSR2000_2R1

TRANSMITTER
Operating wavelength (nm)

1290-1330

1529-1560

1530-1565

1290-1330

1529-1560

Source type

SLM

SLM

SLM

SLM

SLM

Modulation

External

External

External

External

External

Central frequency (THz)

NA

NA

NA

NA

NA

Maximum central frequency deviation (GHz)

NA

NA

NA

NA

NA

Spacing (GHz)

NA

NA

NA

NA

NA

Max. -20 dB width (nm)

<1

<1

<1

<1

<1

Min. side mode suppression (dB)

30

30

30

30

30

Min. mean launched power (dBm)

-6

-1

-6

-1

Max. mean launched power (dBm)

-1

+2

+4

-1

+2

Min. extinction ratio (dB)

8.2

8.2

Min. sensitivity (BER of 1*10-12) EOL (dBm)

-11

-14

-24

-11

-14

Min. overload (dBm)

-1

-1

-7

-1

-1

Max. receiver reflectance (dB)

-27

-27

-27

-27

-27

Max. dispersion [ps/nm]

6.6

800

1600

6.6

800

Min. optical return loss of cable (dB)

24

24

24

24

24

Max. discrete reflectance (dB)

-27

-27

-27

-27

-27

Max. optical path penalty (dB)

OTC10_ALxx

OTR10T_AL

OTRN10_ALxx

RECEIVER

OPTICAL PATH BETWEEN S & R

Table 4-11: STM-64 colored interface (XFPs)


XFP TRANSCEIVER NAME

OTR10_ASxx OTR10_ALxx OTC10_PSxx

APPLICATION CODE91
Operating wavelength (nm)

1L1-2D2F
1529-1560

1529-1560

1465-1617

1465-1617

1528.38-1564.68 1528.77-1564.68

SLM

SLM

SLM

SLM

SLM

TRANSMITTER
Source type

90

Application code is in reference to ITU-T Recommendation G.691.

91

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

SLM

4-17

NPT Product Line System Specifications

XFP TRANSCEIVER NAME

NPT-1200 Specifications

OTR10_ASxx OTR10_ALxx OTC10_PSxx

OTC10_ALxx

OTR10T_AL

OTRN10_ALxx

Modulation

NRZ

NRZ

Spacing (GHz)

NA

NA

50

100

Max. -20 dB width (nm)

<1

<1

<1

<1

<0.5

<1

Min. side mode suppression (dB)

30

30

30

30

35

30

Min. mean launched power (dBm)

-1

-1

-1

Max. mean launched power (dBm)

+3

+3

+4

+4

+3

+3

Min. extinction ratio (dB)

8.2

8.2

8.2

Min. sensitivity (BER of 1*10-12) EOL -24


(dBm)

-24

S band, C band -16 S band, C band -16 -24

Min. overload (dBm)

-8

Max. receiver reflectance (dB)

RECEIVER
-2892

L band -15

L band -15

-8

-1

-7

-7

-5

-27

-27

-27

Max. dispersion [ps/nm]

800

1600

800

1400

1440

1150

Min. optical return loss of cable (dB)

Max. discrete reflectance (dB)

-27

-27

-27

Max. optical path penalty (dB)

2.5

OPTICAL PATH BETWEEN S & R

Table 4-12: STM-64 bidirectional transceivers (XFPs)


XFP TRANSCEIVER NAME

OTR64_S27BD

OTR64_S33BD

OTR64_L27BD

OTR64_L33BD

OTR64_E27BD

OTR64_E33BD

APPLICATION CODE93

S27BD

S33BD

L27BD

L27BD

Operating wavelength (nm)

1270

1330

1270

1330

1270

1330

Source type

DFB

DFB

DFB

DFB

DFB

DFB

Modulation

NRZ

NRZ

NRZ

NRZ

Direct max.-20 dB width (nm)

Min. side mode suppression (dB)

30

30

30

30

30

30

Min. mean launched power (dBm)

-5

-5

Max. mean launched power (dBm)

Min. extinction ratio (dB)

TRANSMITTER

92

With FEC/EFEC enabled.

93

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

4-18

NPT Product Line System Specifications

NPT-1200 Specifications

XFP TRANSCEIVER NAME

OTR64_S27BD

OTR64_S33BD

OTR64_L27BD

OTR64_L33BD

OTR64_E27BD

OTR64_E33BD

Maximum attenuation (dB)

16

16

21

21

Minimum attenuation (dB)

11

11

Min. sensitivity (BER of 1*10-12) EOL


(dBm)

-14

-14

-15

-15

-20

-20

Min. overload (dBm)

0.5

0.5

0.5

0.5

-6

-6

Max. dispersion [ps/nm]

--

--

--

--

Min. optical return loss of cable (dB)

14

14

14

14

Max. discrete reflectance (dB)

--

--

--

--

Max. optical path penalty (dB)

OCH switching time (ms)

--

--

--

--

10

10

RECEIVER

Max. receiver reflectance (dB)


OPTICAL PATH BETWEEN S & R

Parent Topic
4.11 SDH Interfaces

4.13 Ethernet Specifications


Table 4-13: TDM Ethernet Layer 1 cards
Card

DMFE_4_L1/DMFX_4_L1

DMGE_4_L1

Service interfaces

4 x FE/

4 x GbE

4 x FX
Data handling

Layer 1

Layer 1

Network interfaces

4 x EoS

4 x EoS

Total WAN bandwidth

4 x VC-4

16 x VC-4

Encapsulation mode

GFP

GFP

VCAT mode

252 x VC-12

504 x VC-12

12 x VC-3

48 x VC-3

4 x VC-4

16 x VC-4

LCAS mode

LCAS and Non-LCAS

LCAS and Non-LCAS

Differential delay compensation

64 ms

128 ms

Maximum frame length supported

9600 Bytes

10 KBytes

ECI Telecom Ltd. Proprietary

4-19

NPT Product Line System Specifications

NPT-1200 Specifications

Table 4-14: TDM Ethernet Layer 2/MPLS-TP cards


Card

MPS_2G_8F

DMFE_4_L2/DMFX_4_L2

DMGE_2_L2

DMGE_4_L2

Service interfaces

2 x GbE/FX combo +
8 x FE

4 x FE/

2 x GbE

4 x GbE

Layer 1 & Layer 2 (supports


double tagging and MPLS)

Layer 1 & Layer 2 (supports


double tagging and MPLS)

Layer 1 & Layer 2

Layer 1 & Layer 2

(supports double tagging


and MPLS)

(supports double tagging


and MPLS)

Network interfaces

64 x EoS/MoT

8 x EoS/MoT

64 x EoS/MoT

64 x EoS/MoT

Total WAN bandwidth

4 x VC-4

4 x VC-4

14 x VC-4

16 x VC-4

Encapsulation mode

GFP

GFP

GFP

GFP

VCAT mode

252 x VC-12

252 x VC-12

504 x VC-12

504 x VC-12

12 x VC-3

12 x VC-3

48 x VC-3

48 x VC-3

4 x VC-4

4 x VC-4

14 x VC-4

16 x VC-4

LCAS mode

LCAS and Non-LCAS

LCAS and Non-LCAS

LCAS and Non-LCAS

LCAS and Non-LCAS

Differential delay
compensation

128 ms

64 ms

128 ms

128 ms

Maximum frame length


supported

9216 Bytes

9216 Bytes

9216 Bytes

9736 Bytes

Card

DMGE_8_L2

DMXE_48_L2

DMXE_22_L2

MPoE_12G

Service interfaces

2 x GbE Combo + 6 x GbE

4 x 10 GbE + 8 x GbE

2 x 10 GbE + 2 x GbE

4 x GbE optical + 8 x GbE


electrical

Data handling

Layer 1 & Layer 2

Layer 1 & Layer 2

Layer 1 & Layer 2

Layer 1 & Layer 2

(supports double tagging


and MPLS)

(supports double tagging


and MPLS)

(supports double tagging


and MPLS)

(supports double tagging


and MPLS)

Network interfaces

96 x EoS/MoT

96 x EoS/MoT

64 x EoS/MoT

64 x EoS/MoT

Total WAN bandwidth

32 x VC-4

32 x VC-4

16 x VC-4

4 x VC-4

Encapsulation mode

GFP

GFP

GFP

GFP

VCAT mode

504 x VC-12

504 x VC-12

504 x VC-12

252 x VC-12

96 x VC-3

96 x VC-3

96 x VC-3

48 x VC-3

32 x VC-4

32 x VC-4

32 x VC-4

16 x VC-4

LCAS mode

LCAS and Non-LCAS

LCAS and Non-LCAS

LCAS and Non-LCAS

LCAS and Non-LCAS

Differential delay
compensation

128 ms

128 ms

128 ms

128 ms

Maximum frame length


supported

9736 Bytes

9736 Bytes

9736 Bytes

9736 Bytes

Data handling

ECI Telecom Ltd. Proprietary

4 x FX

4-20

NPT Product Line System Specifications

NPT-1200 Specifications

Table 4-15: Hybrid Ethernet Layer 2/MPLS-TP cards


Card

Max cards per platform

Service interfaces

CPTS/CPS Connectivity

DHXE_2

694

2 x 10 GbE

20 GbE

DHGE_8

8 x 100/1000BaseX (CSFP)

8 GbE

DHGE_4E

4 x 10/100/1000BaseT

4 GbE

DHGE_16

8 x 10/100/1000BaseT

16 GbE

+
8 x 100/1000BaseX (CSFP)
DHGE_24

24 x 100/1000BaseX (CSFP)

24 GbE

DHFE_12

12 x 10/100BaseT

2.5 GbE

DHFX_12

12 x 10/100BaseX

2.5 GbE

Parent Topic
4 NPT-1200 Specifications

4.13.1 CPTS100
10 GbE interface type (SFP+)

10GBase-SR, LR, LRM, ER, ZR, BD, colored


10GBase-SW, LW, EW, ZW, BD, colored

Number of 10GE ports

Supported OTN mapping

10GBase-R mapping to OTU2e


10GBase-W mapping to OTU2

Supported FEC types

ITU-T G.709 FEC


EFEC (ITU-T G.975.1 I.4)
EFEC (ITU-T G.975.1 I.7)

Number of Sync-E ports

Supported types of 1588v2 PTP Clock

BC, OC (slave or master), and two-step TC

Number of Sync-E Tx Timing domains

2 (system and PTP slave clock)

Switch capacity

72 Gbps (for IMIX)

MAC address table capacity per switch

128 K

MAC address table capacity per VSI

64 K

Supported VLAN quantity

4000 * 4094, as per IEEE 802.1ad

Supported C-VLAN groups

16000

Supported MPLS P2P tunnels queues

16000

Supported Bidirectional LSPs

2048

94

Six DHXE_2 cards can be assigned, but only six ports can be activated totally.

ECI Telecom Ltd. Proprietary

4-21

NPT Product Line System Specifications

NPT-1200 Specifications

Maximum number of LSP1:1 Linear Protection Domains

1024

Tunnel incoming label space for pass through

16~32767

Tunnel incoming label space for drop

32768~262143

Supported MPLS P2MP tunnels

32

Supported maximum PWs

16000

Supported maximum VSIs

4000

Supported maximum policers

4000

Supported maximum policer profiles

256

CIR/EIR granularity of policer

64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)

CIR granularity of high CoS shaper

128K~512Kbps@128Kbps
1~16Mbps@1Mbps
16~64Mbps@2Mbps
64~256Mbps@4Mbps
256~1280Mbps@8Mbps
1280~5120Mbps@256Mbps
6000~10000Mbps@1000Mbps

CIR granularity for low CoS bandwidth

128K~512Kbps@128Kbps
1~16Mbps@1Mbps
16~64Mbps@2Mbps
64~256Mbps@4Mbps
256~1280Mbps@8Mbps
1280~5120Mbps@256Mbps
6000~10000Mbps@1000Mbps

PIR granularity for E-LSP bandwidth limit

1~ No Rate Limit@1Mbps

Maximum sites per VPLS instance

255-number of UNI/NNI

Maximum number of UNI/NNI ports per VSI

64

Maximum number of CoSs

MSTP/ERPS instance number

32

Supported maximum multicast groups per rooted MP leaf


VSI

1024

Max MTU size

9736 bytes

LAG support

up to 32 LAGs with up to 8 port members per


LAG

Supported BFD intervals

3.33 msec (fast BFD), 10 msec, 100 msec, 1000


msec

Maximum number of BFD sessions

600

Maximum number of BFD sessions over Bidirectional LSP

500

Maximum number of BFD sessions for section

Maximum number of ports

Maximum number of BFD templates

10

ECI Telecom Ltd. Proprietary

4-22

NPT Product Line System Specifications

NPT-1200 Specifications

Supported CFM intervals

3.33 msec, 10 msec, 100 msec


1 sec, 10 sec, 60 sec, 600 sec (slow)

Maximum number of 3.33ms/10ms/100ms/1000ms CCM


sessions

500

Maximum aggregated packet rate for slow CCM


(1s/10s/1min/10min)

200 pps

Total number of 3.33ms BFD and CCM sessions

<=100

Total number of 10ms/100ms CCM and


10ms/100ms/1000ms BFD sessions

<=500

Standards compliance

IEEE802.1p, IEEE802.1Q, IEEE802.1ad,


IEEE802.1w, IEEE802.1s, IEEE802.1ag
IEEE802.3, IEEE802.3x, IEEE802.3ad,
IEEE802.3ah,
IEEE802.3u, IEEE802.3z, IEEE802.3ae
RFC3031, RFC3032, RFC3916, RFC3985,
RFC4090
RFC5586, RFC5654, RFC5880, RFC5921,
RFC6428, RFC6378, RFC6427, RFC2544 (up to 1
GbE)
ITU-T Y.1710, Y.1711, Y.1731
G.707, G.783, G.7041 (GFP), G.7042 (LCAS),
G.8032
MEF9, MEF10, MEF14
ITU-T G.8262, G.8264, G.8265.1, IEEE 1588v2

Parent Topic
4.12 Ethernet Specifications

4.13.1.1 HEOS_16
Total WAN bandwidth

32 x VC-4 (5 Gbps)

Number of EoS/MoT ports

16

Maximum bandwidth per EoS/MoT


port

5 Gbps

Encapsulation mode

GFP-F

VCAT mode

VC-4-X/v

LCAS mode

LCAS and Non-LCAS

Differential delay compensation

Up to 128 ms

Parent Topic
4.12.1 CPTS100

ECI Telecom Ltd. Proprietary

4-23

NPT Product Line System Specifications

NPT-1200 Specifications

4.13.2 CPS100
10 GbE interface type (SFP+)

10GBase-SR, LR, LRM, ER, ZR, BD, colored


10GBase-SW, LW, EW, ZW, BD, colored

Number of 10 GbE ports

Supported OTN mapping

10GBase-R mapping to OTU2e


10GBase-W mapping to OTU2

Supported FEC types

ITU-T G.709 FEC


EFEC (ITU-T G.975.1 I.4)
EFEC (ITU-T G.975 I.7)

Number of Sync-E ports

Supported types of 1588v2 PTP Clock

BC, OC (slave or master), and TC

Number of Sync-E Tx Timing domains

2 (system and PTP slave clock)

Switch capacity

72 Gbps (for IMIX)

MAC address table capacity per switch

128 K

MAC address table capacity per VSI

64 K

Supported VLAN quantity

4000 * 4094, as per IEEE 802.1ad

Supported C-VLAN groups

16000

Supported MPLS P2P tunnels queues

16000

Supported Bidirectional LSPs

2048

Maximum number of LSP1:1 Linear Protection


Domains

1024

Tunnel incoming label space for pass through

16~32767

Tunnel incoming label space for drop

32768~262143

Supported MPLS P2MP tunnels

32

Supported maximum PWs

16000

Supported maximum VSIs

4000

Supported maximum policers

4000

Supported maximum policer profiles

256

CIR/EIR granularity of policer

64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)

CIR granularity of high CoS shaper

128K~512Kbps@128Kbps
1~16Mbps@1Mbps
16~64Mbps@2Mbps
64~256Mbps@4Mbps
256~1280Mbps@8Mbps
1280~5120Mbps@256Mbps
6000~10000Mbps@1000Mbps

ECI Telecom Ltd. Proprietary

4-24

NPT Product Line System Specifications

NPT-1200 Specifications

CIR granularity for low CoS bandwidth

128K~512Kbps@128Kbps
1~16Mbps@1Mbps
16~64Mbps@2Mbps
64~256Mbps@4Mbps
256~1280Mbps@8Mbps
1280~5120Mbps@256Mbps
6000~10000Mbps@1000Mbps

PIR granularity for E-LSP bandwidth limit

1~ No Rate Limit@1Mbps

Maximum sites per VPLS instance

255-number of UNI/NNI

Maximum number of UNI/NNI ports per VSI

64

Maximum number of CoSs

MSTP/ERPS instance number

32

Supported maximum multicast groups per rooted MP 1024


leaf VSI
Max MTU size

9736 bytes

LAG support

up to 32 LAGs with up to 8 port members per LAG

Supported BFD intervals

3.33 msec (fast BFD), 10 msec, 100 msec, 1000 msec

Maximum number of BFD sessions

600

Maximum number of BFD sessions over Bidirectional 500


LSP
Maximum number of BFD sessions for section

Maximum number of ports

Maximum number of BFD templates

10

Supported CFM intervals

3.33 msec, 10 msec, 100 msec


1 sec,10 sec, 60 sec, 600 sec (slow)

Maximum number of 3.33ms/10ms/100ms/1000ms


CCM sessions

500

Maximum aggregated packet rate for slow CCM (1


sec/10 sec/1 min/10 min)

200 pps

Total number of 3.33ms BFD and CCM sessions

<=100

Total number of 10ms/100ms CCM and 10 ms/100


ms/1000 ms BFD sessions

<=500

ECI Telecom Ltd. Proprietary

4-25

NPT Product Line System Specifications

NPT-1200 Specifications

Standards compliance

IEEE802.1p, IEEE802.1Q, IEEE802.1ad,


IEEE802.1w, IEEE802.1s, IEEE802.1ag
IEEE802.3, IEEE802.3x, IEEE802.3ad, IEEE802.3ah,
IEEE802.3u, IEEE802.3z, IEEE802.3ae
RFC3031, RFC3032, RFC3916, RFC3985, RFC4090
RFC5586, RFC5654, RFC5880, RFC5921, RFC6428,
RFC6378, RFC6427, RFC2544 (up to 1 GbE)
ITU-T Y.1710, Y.1711, Y.1731
G.707, G.783, G.7041 (GFP), G.7042 (LCAS), G.8032
MEF9, MEF10, MEF14
ITU-T G.8262, G.8264, G.8265.1, IEEE 1588v2

Parent Topic

4.12 Ethernet Specifications

4.13.3 DHXE_2
Interface connector type

2 x SFP+

Supported port types

10GBase-SR, LR, LRM, ER, ZR, BD, colored


10GBase-SW, LW, EW, ZW, BD, colored

Maximum number of 10GBase-R ports

Maximum number of 10GBase-W ports

Number of Sync-E ports

2 (all ports)

Number of Sync-E Tx clock domains

2 (System clock, PTP, and slave clock)

Standards compliance

IEEE802.3
ITU-T G.8262

Parent Topic

4.12 Ethernet Specifications

4.13.4 DHGE_4E
Interface connector type

4 x RJ45

Supported ports

4 x 10/100/1000Base-Tx with PoE support

PoE PSE pin-out

IEEE 802.3af, Alternative A

Supported PD type

IEEE 802.3at type 1, type 2

Maximum PoE power per port

30 W

Number of Sync-E ports

4 (all ports)

Number of Sync-E Tx clock domains

2 (System clock, PTP slave clock)

Standards compliance

IEEE802.3
ITU-T G.8262

Parent Topic

4.12 Ethernet Specifications


ECI Telecom Ltd. Proprietary

4-26

NPT Product Line System Specifications

NPT-1200 Specifications

4.13.5 DHGE_8
Interface connector type

4 x SFP

Supported port types

1000Base-SX, LX, EX, ZX


100Base-FX (SM and MM)

Maximum number of 1000Base-X ports

Maximum number of 100Base-FX ports

Maximum number of 10/100/1000Base-T ports

4 (with copper SFP ETGBE)

Number of Sync-E ports

Standards compliance

IEEE802.3
ITU-T G.8262

Parent Topic
4.12 Ethernet Specifications

4.13.6 DHGE_16
Interface connector type

8 x RJ45
4 x SFP (SFP/CSFP compatible)

Supported port types

10/100/1000Base-Tx
1000Base-SX, LX, EX, ZX
100Base-FX (SM and MM)

Maximum number of 10/100/1000Base-Tx


ports

8 +4 (with copper SFP ETGBE)

Maximum number of 1000Base-X ports

8 (with CSFP)
4 (with SFP)

Maximum number of 100Base-FX ports

8 (with CSFP)
4 (with SFP)

Number of Sync-E ports

16 (all ports)

Number of Sync-E Tx clock domains

2 (System clock, PTP slave clock)

Standards compliance

IEEE802.3
ITU-T G.8262

Parent Topic
4.12 Ethernet Specifications

ECI Telecom Ltd. Proprietary

4-27

NPT Product Line System Specifications

NPT-1200 Specifications

4.13.7 DHGE_24
Interface connector type

12 x SFP (SFP/CSFP compatible)

Supported port types

1000Base-SX, LX, EX, ZX


100Base-FX (SM and MM)

Maximum number of 1000Base-X ports 24 (with CSFP)


12 (with SFP)
Maximum number of 100Base-FX ports 24 (with CSFP)
12 (with SFP)
Maximum number of
10/100/1000Base-Tx ports

12 (with copper SFP ETGBE)

Number of Sync-E ports

24 (all ports)

Number of Sync-E Tx clock domains

2 (System clock, PTP slave clock)

Standards compliance

IEEE802.3
ITU-T G.8262

Parent Topic
4.12 Ethernet Specifications

4.13.8 DHFE_12
Interface connector type

12 x RJ-45

Supported port types

10/100Base-T

Maximum number of 10/1000Base-T


ports

12

Standards compliance

IEEE802.3

Parent Topic
4.12 Ethernet Specifications

4.13.9 DHFX_12
Interface connector type

12 x SFP

Supported port types

100Base-FX

Maximum number of 100Base-FX ports 12


Standards compliance

IEEE802.3

Parent Topic
4.12 Ethernet Specifications

ECI Telecom Ltd. Proprietary

4-28

NPT Product Line System Specifications

NPT-1200 Specifications

4.13.10 DMCES1_4
Interfaces

4 x channelized STM-1(SFP)
1 x channelized STM-4 (SFP)
1 x GbE SFP

CES service

Unstructured E1 (SAToP)
Channelized E1 (CESoPSN)

Number of CES service

252

Encapsulation Protocol in standalone mode CESoETH, CESoIP/UDP


Encapsulation Protocol in integration mode CESoETH and CESoMPLS
CES clock recovery mechanism

Adaptive Clock Recovery (ACR)


Differential Clock Recovery (DCR)

Reference clock frequency for DCR RTP


timestamp

19.44 MHz
25 MHz

Number of ACR domains

32

Number of DCR domain

252

E1 Tx Timing mode

Recovered from CES stream


System timing
Loop timing

Payload time

125~8000us@125us

Jitter buffer Max delay var

1000-64000 @1000 sec

Jitter buffer Min latency

500-32000 @500 sec

Standards compliance

IEFT RFC4553, RFC5086


MEF8, MEF3
ITU-T Y.1413, G.707, G.783

Parent Topic
4.12 Ethernet Specifications

4.13.11 DMCE1_32
Interfaces

32 x E1
1 x GbE Combo

CES service

Unstructured E1 (SAToP)
Channelized E1 (CESoPSN)

Number of CES service

32

Encapsulation Protocol in standalone mode CESoETH, CESoIP/UDP


Encapsulation Protocol in integration mode CESoETH, CESoMPLS
CES clock recovery mechanism

ECI Telecom Ltd. Proprietary

Adaptive
Differential

4-29

NPT Product Line System Specifications

NPT-1200 Specifications

Reference clock frequency for DCR RTP


timestamp

19.44 MHz
25 MHz

Adaptive timing domain

32

Differential timing domain

32

Tx Timing mode

Recovered from CES stream


System timing
Loop timing

Payload time

125~8000us@125us

Jitter buffer Max delay var

1000-64000 @1000 sec

Jitter buffer Min latency

500-32000 @500 sec

Standards compliance

IEFT RFC4553, RFC5086


MEF8, MEF3
ITU-T Y.1413, G.703

Parent Topic

4.12 Ethernet Specifications

4.13.12 MSE1_16
Interfaces

16 x E1/T1

CES service

Unstructured E1/T1 (SAToP)


Channelized E1/T1 (CESoPSN)

Number of CES service

16

Encapsulation Protocol

CESoETH, CESoMPLS

CES clock recovery mechanism

Adaptive
Differential

Reference clock frequency for DCR


RTP timestamp

19.44 MHz
25 MHz

Adaptive timing domain

16

Differential timing domain

16

Tx Timing mode

Recovered from CES stream


System timing
Loop timing

Payload time

125~8000us@125us

Jitter buffer Max delay var

1000-64000 @1000 sec

Jitter buffer Min latency

500-32000 @500 sec

Standards compliance

IEFT RFC4553, RFC5086


MEF8, MEF3
ITU-T Y.1413, G.703

Parent Topic

4.12 Ethernet Specifications


ECI Telecom Ltd. Proprietary

4-30

NPT Product Line System Specifications

NPT-1200 Specifications

4.13.13 MPoE_12G
Interface type

4 x 1000Base-X/100Base-FX
8 x 10/100/1000Base-Tx with PoE

PSE pin-out

IEEE 802.3af, Alternative A

Supported PD type

IEEE 802.3at type 1, type 2

Maximum PoE power per card

90 W

Number of Sync-E ports

12 (all GbE ports)

Supported types of 1588v2 PTP Clock

OC (slave or master)
Two-step TC

Switch capacity

10 Gbps

MAC address table capacity

128 K

MAC address table capacity per VSI

64 K

Supported VLAN quantity

4000 * 4094, as per IEEE 802.1ad

Supported C-VLAN groups

16000

Supported MPLS P2P tunnel queues

8000

Supported Bidirectional LSPs

2048

Maximum number of LSP1:1 Linear


Protection Domains

1024

Supported MPLS P2MP tunnels

32

Supported maximum PWs

16000

Supported maximum VSIs

4000

Supported maximum policers

4000

Supported maximum policer profiles

128

CIR/EIR granularity of policer

64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)

CIR granularity of high CoS Shaper

128K~512Kbps@128Kbps
1~16Mbps@1Mbps
16~64Mbps@2Mbps
64~256Mbps@4Mbps
256~1280Mbps@8Mbps

CIR granularity of low CoS bandwidth

128K~512Kbps@128Kbps
1~16Mbps@1Mbps
16~64Mbps@2Mbps
64~256Mbps@4Mbps
256~1280Mbps@8Mbps

PIR granularity of E-LSP bandwidth

1~No rate limit@1Mb/s

Maximum sites per VPLS instance

255-number of UNI/NNI

Maximum number of UNI/NNI port per VSI 64

ECI Telecom Ltd. Proprietary

4-31

NPT Product Line System Specifications

NPT-1200 Specifications

Maximum number of CoSs

MSTP/ERPS instance number

32

Supported maximum multicast groups per 1024


rooted MP leaf VSI
LAG support

up to 32 LAGs with up to 8 port members per LAG

Supported BFD intervals

3.33 msec (fast BFD), 10 msec, 100 msec, 1000 msec

Maximum number of BFD sessions

600

Maximum number of BFD sessions over


Bidirectional LSP

500

Maximum number of BFD sessions for


section

Maximum number of ports

Maximum number of BFD templates

10

Supported CFM intervals

3.33 msec, 10 msec, 100 msec


1 sec,10 sec, 60 sec, 600 sec (slow)

Maximum number of 3.33 msec/10


msec/100 msec/1000 msec CCM sessions

500

Maximum aggregated packet rate for slow 200 pps


CCM (1s/10s/1min/10min)
Total number of 3.33 msec BFD and CCM
sessions

<=100

Total number of 10 msec/100 msec CCM


and 10 msec/100 msec/1000 msec BFD
sessions

<=500

Standards compliance

IEEE802.1p, IEEE802.1Q, IEEE802.1ad


IEEE802.1w, IEEE802.1s, IEEE802.1ag
IEEE802.3, IEEE802.3x, IEEE802.3ad, IEEE802.3ah
IEEE802.3u, IEEE802.3z
IEEE802.3at (PoE+), IEEE 802.3af (PoE)
RFC3031, RFC3032, RFC3916, RFC3985, RFC4090
RFC5586, RFC5654, RFC5880, RFC5921, RFC6428, RFC6378,
RFC6427
ITU-T Y.1710, Y.1711, Y.1731
G.707, G.783, G.7041 (GFP), G.7042 (LCAS), G.8032
MEF9, MEF10, MEF14

Parent Topic
4.12 Ethernet Specifications

ECI Telecom Ltd. Proprietary

4-32

NPT Product Line System Specifications

NPT-1200 Specifications

4.13.14 DMXE_22_L2
10 GbE interface type (SFP+)

10GBase-SR, LR, LRM, ER, ZR, BD


10GBase-SW, LW, EW, ZW, color

GbE interface type (SFP)

1000Base-SX, LX, EX, ZX, BD (with optical SFP)


10/100/1000Base-T (with electrical SFP)

Number of Sync-E ports

4 (all 10GbE/GbE ports)

Supported types of 1588v2 PTP Clock

OC (slave or master)
Two-step TC

Switch capacity

24 Gbps (for IMIX)

MAC address table capacity per switch

128 K

MAC address table capacity per VSI

64 K

Supported VLAN quantity

4000 * 4094, as per IEEE 802.1ad

Supported C-VLAN groups

8000

Supported MPLS P2P tunnels queues

8000

Supported Bidirectional LSPs

2048

Maximum number of LSP1:1 Linear Protection Domains 1024


Supported Bidirectional LSPs

2048

Tunnel incoming label space for pass through

3072~4095

Tunnel incoming label space for drop

16~3071

Supported maximum PWs

8000

Supported maximum VSIs

4000

Supported maximum policers

4000

Supported maximum policer profiles

128

CIR/EIR granularity of policer

64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)

CIR granularity of high CoS shaper

128K~512Kbps@128Kbps
1~16Mbps@1Mbps
16~64Mbps@2Mbps
64~256Mbps@4Mbps
256~1280Mbps@8Mbps
1280~5120Mbps@256Mbps
6000~10000Mbps@1000Mbps

CIR granularity for low CoS bandwidth

128K~512Kbps@128Kbps
1~16Mbps@1Mbps
16~64Mbps@2Mbps
64~256Mbps@4Mbps
256~1280Mbps@8Mbps
1280~5120Mbps@256Mbps
6000~10000Mbps@1000Mbps

ECI Telecom Ltd. Proprietary

4-33

NPT Product Line System Specifications

NPT-1200 Specifications

PIR granularity for E-LSP bandwidth limit

1~ No Rate Limit@1Mbps

Maximum sites per VPLS instance

255-number of UNI/NNI

Maximum number of UNI/NNI ports per VSI

64

Maximum number of CoSs

MSTP/ERPS instance number

32

Supported maximum multicast groups per Rooted MP


leaf VSI

1024

LAG support

up to 32 LAGs with up to 8 port members per LAG

Supported BFD intervals

3.33 msec, 10 msec, 100 msec, 1000 msec

Maximum number of BFD sessions

600

Maximum number of BFD sessions over Bidirectional


LSP

500

Maximum number of BFD sessions for section

Maximum number of ports (68)

Maximum number of BFD templates

10

Supported CFM intervals

3.33 msec, 10 msec, 100 msec


1 sec,10 sec, 60 sec, 600 sec (slow)

Maximum number of 3.33 msec/10 msec/100


msec/1000 msec CCM sessions

500

Maximum aggregated packet rate for slow CCM (1


sec/10 sec/1 min/10 min)

200 pps

Total number of 3.33 msec BFD and CCM sessions

<=100

Total number of 10 msec/100 msec CCM and 10


msec/100 msec/1000 msec BFD sessions

<=500

Standards compliance

IEEE802.1p, IEEE802.1Q, IEEE802.1ad,


IEEE802.1w, IEEE802.1s, IEEE802.1ag IEEE802.3,
IEEE802.3x, IEEE802.3ad, IEEE802.3ah,
IEEE802.3u, IEEE802.3z, IEEE802.3ae
RFC3031, RFC3032, RFC3916, RFC3985, RFC4090
RFC5586, RFC5654, RFC5880, RFC5921, RFC6428,
RFC6378, RFC6427
ITU-T Y.1710, Y.1711, Y.1731
G.707, G.783, G.7041 (GFP), G.7042 (LCAS),
G.8032
MEF9, MEF10, MEF14
ITU-T G.8262, G.8264, G.8265.1, IEEE 1588v2

Parent Topic
4.12 Ethernet Specifications

ECI Telecom Ltd. Proprietary

4-34

NPT Product Line System Specifications

NPT-1200 Specifications

4.13.15 DMXE_48_L2
10 Gb interface type (SFP+)

10GBase-SR, LR, LRM, ER, ZR, BD


10GBase-SW, LW, EW, ZW

GbE interface type (SFP)

1000Base-SX, LX, EX, ZX, BD (with optical SFP)


10/100/1000Base-T (with electrical SFP)

Number of Sync-E ports

12 (all 10GbE/GbE ports)

Supported types of 1588v2 PTP Clock

OC (slave or master)
Two-step TC

Switch capacity

50 Gbps (for IMIX)

MAC address table capacity per switch

128 K

MAC address table capacity per VSI

64 K

Supported VLAN quantity

4000 * 4094, as per IEEE 802.1ad

Supported C-VLAN groups

16000

Supported MPLS P2P tunnels queues

16000

Supported Bidirectional LSPs

2048

Maximum number of LSP1:1 Linear Protection Domains

1024

Supported Bidirectional LSPs

2048

Supported MPLS P2MP tunnels

32

Supported maximum PWs

16000

Supported maximum VSIs

4000

Supported maximum policers

4000

Supported maximum policer profiles

256

CIR/EIR granularity of policer

64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)

CIR granularity of high CoS shaper

128K~512Kbps@128Kbps
1~16Mbps@1Mbps
16~64Mbps@2Mbps
64~256Mbps@4Mbps
256~1280Mbps@8Mbps
1280~5120Mbps@256Mbps
6000~10000Mbps@1000Mbps

CIR granularity for low CoS bandwidth

128K~512Kbps@128Kbps
1~16Mbps@1Mbps
16~64Mbps@2Mbps
64~256Mbps@4Mbps
256~1280Mbps@8Mbps
1280~5120Mbps@256Mbps
6000~10000Mbps@1000Mbps

PIR granularity for E-LSP bandwidth limit

1~ No Rate Limit@1Mbps

ECI Telecom Ltd. Proprietary

4-35

NPT Product Line System Specifications

NPT-1200 Specifications

Maximum sites per VPLS instance

255-number of UNI/NNI

Maximum number of UNI/NNI ports per VSI

64

Maximum number of CoSs

MSTP/ERPS instance number

32

Supported maximum multicast groups per Rooted MP


leaf VSI

1024

LAG support

up to 32 LAGs with up to 8 port members per


LAG

Supported BFD intervals

3.33 msec, 10 msec, 100 msec, 1000 msec

Maximum number of BFD sessions

600

Maximum number of BFD sessions over Bidirectional LSP

500

Maximum number of BFD sessions for section

Maximum number of ports (108)

Maximum number of BFD templates

10

Supported CFM intervals

3.33 msec, 10 msec, 100 msec


1 sec,10 sec, 60 sec, 600 sec (slow)

Maximum number of 3.33 msec/10 msec/100 msec/1000 500


msec CCM sessions
Maximum aggregated packet rate for slow CCM (1 sec/10 200 pps
sec/1 min/10 min)
Total number of 3.33 msec BFD and CCM sessions

<=100

Total number of 10 msec/100 msec CCM and 10


msec/100 msec/1000 msec BFD sessions

<=500

Standards compliance

IEEE802.1p, IEEE802.1Q, IEEE802.1ad,


IEEE802.1w, IEEE802.1s, IEEE802.1ag
IEEE802.3, IEEE802.3x, IEEE802.3ad,
IEEE802.3ah,
IEEE802.3u, IEEE802.3z, IEEE802.3ae
RFC3031, RFC3032, RFC3916, RFC3985, RFC4090
RFC5586, RFC5654, RFC5880, RFC5921,
RFC6428, RFC6378, RFC6427
ITU-T Y.1710, Y.1711, Y.1731
G.707, G.783, G.7041 (GFP), G.7042 (LCAS),
G.8032
MEF9, MEF10, MEF14
ITU-T G.8262, G.8264, G.8265.1, IEEE 1588v2

Parent Topic
4.12 Ethernet Specifications

ECI Telecom Ltd. Proprietary

4-36

NPT Product Line System Specifications

NPT-1200 Specifications

4.13.16 DMGE_2_L2
Interface type

1000Base-X/SX/LX/ZX/EX/BD
10/100BaseT/1000BaseT (SFP)

Switch capacity

3.0 Gbps

MAC address table capacity

32,768

Supported VLAN quantity

1024 * 4094, as per IEEE 802.1ad

Supported MPLS P2P tunnel queues

2000

Supported Bidirectional LSPs

256

Maximum number of LSP1:1 Linear


Protection Domains

128

Supported Bidirectional LSPs

256

Maximum number of LSP1:1 Linear


Protection Domains

128

Supported maximum PWs

8000

Supported maximum VSIs

1000

Supported maximum policers

2000

Supported maximum policer profiles

128

CIR/EIR granularity of policer

64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)

Maximum sites per VPLS instance

32

Maximum number of UNI/NNI port per VSI 16


Maximum number of CoSs

MSTP/ERPS instance number

32

Supported maximum multicast groups

250

LAG support

up to 7 LAGs with up to 4 port members per LAG

Supported BFD intervals

100 ms, 1000 ms

Maximum number of 100 ms BFD sessions

10

Maximum number of 1000 ms BFD sessions 100


Standards compliance

IEEE802.1p, IEEE802.1Q, IEEE802.1ad, IEEE802.1w, IEEE802.1s,


IEEE802.1ag IEEE802.3, IEEE802.3x, IEEE802.3ad, IEEE802.3ah,
IEEE802.3u, IEEE802.3z,
RFC3031, RFC3032, RFC3916, RFC3985, RFC4090 RFC5586,
RFC5654, RFC5880, RFC5921, RFC6428
Y.1710, Y.1711, Y.1731
G.707, G.783, G.7041 (GFP), G.7042 (LCAS), G.8032
MEF9, MEF10, MEF14

Parent Topic
4.12 Ethernet Specifications

ECI Telecom Ltd. Proprietary

4-37

NPT Product Line System Specifications

NPT-1200 Specifications

4.13.17 DMGE_4_L2
Interface type

1000Base-X (with optical SFP)


10/100/1000Base-T (with electrical SFP)

Switch capacity

6.5Gbps

MAC address table capacity

128 K

Supported VLAN quantity

4000 * 4094, as per IEEE 802.1ad

Supported CVLAN groups

16000

Supported MPLS P2P tunnel queues

8000

Supported Bidirectional LSPs

2048

Supported MPLS P2MP tunnels

32

Maximum number of LSP1:1 Linear


Protection Domains

1024

Supported maximum PWs

16000

Supported maximum VSIs

4000

Supported maximum policers

4000

Supported maximum policer profiles

128

CIR/EIR granularity of policer

64 Kbps (0~2Mb/s)
1 Mbps (2Mb/s~full port rate)

CIR granularity of high CoS Shaper

128K~512Kbps@128Kbps
1~16Mbps@1Mbps
16~64Mbps@2Mbps
64~256Mbps@4Mbps
256~1280Mbps@8Mbps

CIR granularity of low CoS bandwidth

128K~512Kbps@128Kbps
1~16Mbps@1Mbps
16~64Mbps@2Mbps
64~256Mbps@4Mbps
256~1280Mbps@8Mbps

PIR granularity of E-LSP bandwidth

1~No rate limit@1Mb/s

Maximum sites per VPLS instance

255-number of UNI/NNI

Maximum number of UNI/NNI port per VSI 64


Maximum number of CoSs

MSTP/ERPS instance number

32

Supported maximum multicast groups per


Rooted MP leaf VSI

1024

LAG support

up to 32 LAGs with up to 8 port members per LAG

Supported BFD intervals

3.33 msec (fast BFD), 10 msec, 100 msec, 1000 msec

Maximum number of BFD sessions

600

ECI Telecom Ltd. Proprietary

4-38

NPT Product Line System Specifications

NPT-1200 Specifications

Maximum number of BFD sessions over


Bidirectional LSP

500

Maximum number of BFD sessions for


section

Maximum number of ports (68)

Maximum number of BFD templates

10

Supported CFM intervals

3.33 msec, 10 msec, 100 msec


1 sec,10 sec, 60 sec, 600 sec (slow)

Maximum number of 3.33 msec/10


msec/100 msec/1000 msec CCM sessions

500

Maximum aggregated packet rate for slow


CCM (1 sec/10 sec/1 min/10 min)

200 pps

Total number of 3.33 ms BFD and CCM


sessions

<=100

Total number of 10 ms/100 ms CCM and 10 <=500


ms/100 ms/1000 ms BFD sessions
Number of Sync-E ports

4 GbE ports

Supported types of 1588v2 PTP Clock

Two-step TC

Standards compliance

IEEE802.1p, IEEE802.1Q, IEEE802.1ad, IEEE802.1w, IEEE802.1s,


IEEE802.1ag IEEE802.3, IEEE802.3x, IEEE802.3ad, IEEE802.3ah,
IEEE802.3u, IEEE802.3z
RFC3031, RFC3032, RFC3916, RFC3985, RFC4090 RFC5586,
RFC5654, RFC5880, RFC5921, RFC6428, RFC6378, RFC6427
ITU-T Y.1710, Y.1711, Y.1731, G.8262, G.8264
G.707, G.783, G.7041 (GFP), G.7042 (LCAS), G.8032
MEF9, MEF10, MEF14

Parent Topic
4.12 Ethernet Specifications

4.13.18 DMGE_8_L2
Interface type

1000Base-X (with optical SFP)


10/100/1000Base-T (with copper SFP)

Switch capacity

10 Gbps

MAC address table capacity

128 K

Supported VLAN quantity

4000 * 4094, as per IEEE 802.1ad

Supported C-VLAN groups

16000

Supported MPLS P2P tunnel queues

8000

Supported Bidirectional LSPs

2048

Maximum number of LSP1:1 Linear Protection Domains 1024


Supported MPLS P2MP tunnels

ECI Telecom Ltd. Proprietary

32

4-39

NPT Product Line System Specifications

NPT-1200 Specifications

Supported maximum PWs

16000

Supported maximum VSIs

4000

Supported maximum policers

4000

Supported maximum policer profiles

128

CIR/EIR granularity of policer

64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)

CIR granularity of high CoS Shaper

128K~512Kbps@128Kbps
1~16Mbps@1Mbps
16~64Mbps@2Mbps
64~256Mbps@4Mbps
256~1280Mbps@8Mbps

CIR granularity of low CoS bandwidth

128K~512Kbps@128Kbps
1~16Mbps@1Mbps
16~64Mbps@2Mbps
64~256Mbps@4Mbps
256~1280Mbps@8Mbps

PIR granularity of E-LSP bandwidth

1~No rate limit@1Mb/s

Maximum sites per VPLS instance

255-number of UNI/NNI

Maximum number of UNI/NNI ports per VSI

64

Queues in each egress port

MSTP/ERPS instance number

32

Supported maximum multicast groups per Rooted MP


leaf VSI

1024

LAG support

up to 32 LAGs with up to 8 port members per LAG

Supported BFD intervals

3.33 msec (fast BFD), 10 msec, 100 msec, 1000


msec

Maximum number of BFD sessions

600

Maximum number of BFD sessions over Bidirectional


LSP

500

Maximum number of BFD sessions for section

Maximum number of ports (104)

Maximum number of BFD templates

10

Supported CFM intervals

3.33 msec, 10 msec, 100 msec


1 sec,10 sec, 60 sec, 600 sec (slow)

Maximum number of 3.33 msec/10 msec/100


msec/1000 msec CCM sessions

500

Maximum aggregated packet rate for slow CCM (1


sec/10 sec/1 min/10 min)

200 pps

Total number of 3.33 msec BFD and CCM sessions

<=100

Total number of 10 ms/100 ms CCM and 10 msec/100


msec/1000 msec BFD sessions

<=500

Number of Sync-E ports

8 GbE ports

ECI Telecom Ltd. Proprietary

4-40

NPT Product Line System Specifications

NPT-1200 Specifications

Supported types of 1588v2 PTP Clock

Two-step TC

Standards compliance

IEEE802.1p, IEEE802.1Q, IEEE802.1ad,


IEEE802.1w, IEEE802.1s, IEEE802.1ag
IEEE802.3, IEEE802.3x, IEEE802.3ad, IEEE802.3ah,
IEEE802.3u, IEEE802.3z
RFC3031, RFC3032, RFC3916, RFC3985, RFC4090
RFC5586, RFC5654, RFC5880, RFC5921, RFC6428,
RFC6378, RFC6427
ITU-T Y.1710, Y.1711, Y.1731,
G.707, G.783, G.7041 (GFP), G.7042 (LCAS),
G.8032
MEF9, MEF10, MEF14

Parent Topic
4.12 Ethernet Specifications

4.13.19 DMFE_4_L2/DMFX_4_L2
Interface type of DMFE_4_L2

10BaseT/100BaseT

Interface type of DMFX_4_L2

100Base-FX

Switch capacity

1.2 Gbps

MAC address table capacity

32,768

Supported VLAN quantity

1024 * 4094, as per IEEE 802.1ad

Supported MPLS P2P tunnel queues

1000

Supported Bidirectional LSPs

256

Maximum number of LSP1:1 Linear


Protection Domains

128

Supported maximum PWs

4000

Supported maximum VSIs

1000

Supported maximum policers

2000

Supported maximum policer profiles

128

CIR/EIR granularity of policer

64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)

Maximum sites per VPLS instance

32

Maximum number of UNI/NNI port per VSI 16


Maximum number of CoSs

MSTP/ERPS instance number

32

Supported maximum multicast groups

128

LAG support

up to 6 LAGs with up to 4 port members per LAG

Supported BFD intervals

100 msec, 1000 msec

ECI Telecom Ltd. Proprietary

4-41

NPT Product Line System Specifications

NPT-1200 Specifications

Maximum number of 100 ms BFD sessions

10

Maximum number of 1000 ms BFD sessions 100


Standards compliance

IEEE802.1p, IEEE802.1Q, IEEE802.1ad,IEEE802.1w, IEEE802.1s,


IEEE802.1ag,EEE802.3, IEEE802.3x, IEEE802.3ad, IEEE802.3ah,
IEEE802.3u
RFC3031, RFC3032, RFC3916, RFC3985, RFC4090
RFC5586, RFC5654, RFC5880, RFC5921, RFC6428
Y.1710, Y.1711, Y.1731
G.707, G.783, G.7041 (GFP), G.7042 (LCAS), G.8032
MEF9, MEF10, MEF14

Parent Topic
4.12 Ethernet Specifications

4.13.20 MPS_2G_8F
Interface type

1000Base-X, 10/100/1000BaseTx
100Base-FX, 10/100Base-Tx,

Switch capacity

3.0 Gbps

MAC address table capacity

32,768

Supported VLAN quantity

1024 * 4094, as per IEEE 802.1ad

Supported MPLS P2P tunnel queues

2000

Supported Bidirectional LSPs

256

Maximum number of LSP1:1 Linear


Protection Domains

128

Supported maximum PWs

8000

Supported maximum VSIs

1000

Supported maximum policers

2000

Supported maximum policer profiles

128

Number of Sync-E ports

2 GbE ports

CIR/EIR granularity of policer

64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)

Maximum sites per VPLS instance

32

Maximum Number of UNI/NNI port per


VSI

16

Maximum number of CoSs

MSTP/ERPS instance number

32

Supported maximum multicast groups

250

LAG support

up to 7 LAGs with up to 4 port members per LAG

Supported Configurable BFD intervals

100 ms, 1000 ms

ECI Telecom Ltd. Proprietary

4-42

NPT Product Line System Specifications

NPT-1200 Specifications

Maximum number of 100 ms BFD


sessions

10

Maximum number of 1000 ms BFD


sessions

100

Standards compliance

IEEE802.1p, IEEE802.1Q, IEEE802.1ad, IEEE802.1w, IEEE802.1s,


IEEE802.1ag IEEE802.3, IEEE802.3x, IEEE802.3ad,
IEEE802.3ah, IEEE802.3u, IEEE802.3z, RFC3031, RFC3032,
RFC3916, RFC3985, RFC4090 FC5586, RFC5654, RFC5880,
RFC5921, RFC6428 ITU-T Y.1710, Y.1711, Y.1731 G.707, G.783,
G.7041 (GFP), G.7042 (LCAS), G.8032 MEF9, MEF10, MEF14

Parent Topic
4.12 Ethernet Specifications

4.13.21 DMFE_4_L1/DMFX_4_L1
Interface type of DMFE_4_L1

10BaseT/100BaseT

Interface type of DMFX_4_L1

100Base-FX

Standards compliance

IEEE802.3, IEEE802.3u
G.707, G.783, G.7041 (GFP), G.7042 (LCAS)

Certified Ethernet service

EPL as per Metro Ethernet Forum, MEF9

Data handling

Layer 1

Network interfaces

EoS

Total WAN bandwidth

4 x VC-4

Encapsulation mode

GFP

VCAT mode

VC-12-X/v, VC-3-X/v, VC-4-X/v

LCAS mode

LCAS and Non-LCAS

Differential delay compensation

Up to 64 ms

Maximum frame length supported 9600 Bytes

Parent Topic
4.12 Ethernet Specifications

4.13.22 DMGE_4_L1
Interface type

1000Base-SX/LX/ZX/EX
10/100/1000BaseT

Standards compliance

IEEE802.3, IEEE802.3z,
G.707, G.783, G.7041 (GFP), G.7042 (LCAS)

Certified Ethernet service

EPL, as per Metro Ethernet Forum, MEF9

Data handling

Layer 1

ECI Telecom Ltd. Proprietary

4-43

NPT Product Line System Specifications

NPT-1200 Specifications

Network interfaces

EoS

Total WAN bandwidth

16 x VC-4

Encapsulation mode

GFP

VCAT mode

VC-12-X/v, VC-3-X/v, VC-4-X/v

LCAS mode

LCAS and Non-LCAS

Differential delay compensation

Up to 64 ms

Maximum frame length supported

9600 Bytes

Parent Topic
4.12 Ethernet Specifications

4.13.23 Ethernet Transceivers


Table 4-16: GbE/FX client transceivers

Transmitter type

Data rate
(nominal) (Gbps)

OTGBE_SX

OTGBE_LX

OTGBE_ZX

OTGBE_EX

OTFE_MM

OTFE_SM

GbE/FC1/

GbE/FC1/

GbE/FC1/

GbE/FC1/

FICON(2)
short-reach
laser, 850 nm,
multimode

FICON(2)
long-reach laser,
1310 nm, single
mode

FICON(2)

FICON(2)

FX, short-reach
laser, 1310
multimode

FX, short-reach
laser, 1310 nm,
single mode

very long-reach
laser, 1550 nm,
single mode

very long-reach
laser, 1550 nm,
single mode
1.0625/1.25

0.125

0.125

1.0625/1.25/

1.0625/1.25/

1.0625/1.25/

2.125

2.125

2.125

Max.

-3

-3

-15

-8

Min.

-9

-11

-5

-20

-15

Min. transmitter
extinction ratio
(dB)

10

8.2

Data format

8B/10B

8B/10B

8B/10B

8B/10B

N/A

N/A

Min.

-20

-22

-22

-24

-31

-28

Typical

-21

-25.5

--

--

-30

--

Max. receiver
overload (dBm)

-14

-8

Typical Rx LOS
level (dBm)

-24

-29

-25

-25

< -33

< -28

Connector

LC

LC

LC

LC

LC

LC

Fiber lengths

550 m

10 km

80 km

40 km

2000 m

10 km

(50/62.5 m
MMF)

(9 m SMF)

(9 m SMF)

(9 m SMF)

(50/62.5 m
MMF)

(9 m SMF)

Average launch
power (dBm)

Average receiver
sensitivity (dBm)

ECI Telecom Ltd. Proprietary

4-44

NPT Product Line System Specifications

NPT-1200 Specifications

Table 4-17: GbE bidirectional client transceivers


OTGBE_S3BD

OTGBE_S5BD

OTGBE_L3BD

OTGBE_L5BD

OTGBE_L5BD80

OTGBE_L6BD8
0

Transmitter type

Bidirectional SFP,
1310 nm

Bidirectional SFP,
1490 nm

Bidirectional SFP,
1310 nm e

Bidirectional SFP,
1490 nm

Bidirectional SFP,
1490 nm

Bidirectional
SFP, 1590 nm

Data rate (nominal)


(MBaud)

1250

1250

1250

1250

1250

1250

Average launch
power (dBm)

-3 Max.

-3

+2

+2

+4

+4

-10 Min.

-10

-5

-5

-2

-2

Min. transmitter
>9
extinction ratio (dB)

>9

>9

>9

Data format

8B/10B

8B/10B

8B/10B

8B/10B

8B/10B

8B/10B

Average receiver
sensitivity (dBm)

< -21

< -21

< -23

< -23

-26

-26

Min. overload (dB)

-3

-3

-3

-3

-3

-3

Typical Rx LOS level


(dBm)

< -22

< -22

< -24

< -24

< -26

< -26

Connector

LC

LC

LC

LC

LC

LC

Fiber lengths

10 km

10 km

40 km

40 km

80 km

80 km

(9 m SMF)

(9 m SMF)

(9 m SMF)

(9 m SMF)

(9 m SMF)

(9 m SMF)

Parent Topic
4.12 Ethernet Specifications

4.13.24 CWDM and DWDM STM-16/GbE (2488 Mbps 4.6


ppm)
Table 4-18: CWDM and DWDM STM-16/GbE transceivers
CWDM

DWDM

SFP TRANSCEIVER NAME95

OTC25_PSxx

OTC25_1ALxx

OTR25_AVxx

OTR25_ABxx

APPLICATION CODE96

S-C8S1-1D2/5

S-C8L1-1D2/5

G.695

G.695

DW100L\--1D2/5(C)F
DW100C\--1A2/5(C)F

DW100L\--1D2/5(C)F
DW100C\--1A2/5(C)F

G.698.1/.2

G.698.1/.2

1464-1618

1464-1618

1530-1565

1530-1565

Operating wavelength (nm)


TRANSMITTER

95

New optical SFP transceivers for existing SIO16 basecard.

96

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

4-45

NPT Product Line System Specifications

NPT-1200 Specifications

CWDM

DWDM

SFP TRANSCEIVER NAME95

OTC25_PSxx

OTC25_1ALxx

OTR25_AVxx

OTR25_ABxx

Source type

SLM

SLM

SLM

SLM

Max. -20 dB width (nm)

0.4

0.4

Max. RMS width (nm)

Min. side mode suppression (dB)

30

30

30

30

Min. mean launched power (dBm)

Max. mean launched power (dBm)

+5

+5

Min. extinction ratio (dB)

8.2

8.2

8.2

8.2

-21.5

-28

-28

-28

(-23 GbE)

(-32 GbE)

Min. overload (dBm)

-7

-9

-9

Max. receiver reflectance (dB)

-27

-27

-27

-27

800

1600

2400

3600

(40 km G.652)

(80 km G.652)

(120 km G.652)

(180 km G.652)

Min. optical return loss of cable (dB)

24

24

-24

-24

Max. discrete reflectance (dB)

-27

-27

-27

-27

Max. optical path penalty (dB)

1.5

2.5

<3

<2

RECEIVER
Min. sensitivity (BER of 1*10-12) EOL (dBm)

OPTICAL PATH BETWEEN S & R


Max. dispersion [ps/nm]

Parent Topic
4.12 Ethernet Specifications

4.13.25 Ethernet SFP+ Transceivers


Table 4-19: SFP+ client transceivers
SFP+ TRANSCEIVER NAME OTP10I_ER

OTP10_ER

OTP10_ZR OTP10_SR

OTP10_LR

OTP10_LRM

OTP10Txx
(Linear version)

APPLICATION CODE97

10GBASE-ER 10GBASE-ER L-64.2a


P1L1-2D2

10GBASE-SR 10GBASE-LR 10GBASE-LRM ALLM (Limiting version) or


ALLN (Linear version)

TRANSMITTER
Operating wavelength
(nm)

1530-1565

1530-1565

1530-1565 840-860

1260-1355

1260-1355

C-Band Tunable 1528-1568

Source type

SLM

SLM

SLM

SLM

SLM

C-Band cooled tunable

97

SLM

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

4-46

NPT Product Line System Specifications

SFP+ TRANSCEIVER NAME OTP10I_ER

NPT-1200 Specifications

OTP10_ER

OTP10_ZR OTP10_SR

OTP10_LR

OTP10_LRM

OTP10Txx
(Linear version)

APPLICATION CODE97

10GBASE-ER 10GBASE-ER L-64.2a


P1L1-2D2

10GBASE-SR 10GBASE-LR 10GBASE-LRM ALLM (Limiting version) or


ALLN (Linear version)

Modulation

N/A

N/A

N/A

N/A

N/A

N/A

Spacing (GHz)

NA

NA

NA

NA

NA

NA

Max. -20 dB width (nm)

NA

NA

<1

NA

NA

NA

Min. side mode


suppression (dB)

30

30

30

NA

30

NA

35

Min. mean launched


power (dBm)

-4.7

-4.7

-7.3

-8.2

-6.5

-1

Max. mean launched


power (dBm)

+4

+4

+4

-1

+0.5

+0.5

+3

Min. extinction ratio (dB)

3.5

3.5

Max. attenuation (dB)

11.1

11.1

22

6.2

Min. Attenuation (dB)

11

Min. sensitivity (BER of


1*10-12)

-14.1

-14.1

-24

-11

-12.6

-6.5

-22

Min. overload (dBm)

-1

-1

-7

-1

0.5

0.5

-7

Max. receiver reflectance


(dB)

-27

-27

-27

-27

-27

-27

N/A

Max. dispersion [ps/nm]

N/A

N/A

N/A

N/A

N/A

N/A

1600

Min. optical return loss of


cable (dB)

21

21

21

12

12

20

Max. discrete reflectance


(dB)

-26

-26

-27

-12

-12

-12

Max. optical path penalty


(dB)

3.9

3.2

4.7

OCH switching time (ms)

N/A

N/A

N/A

N/A

N/A

N/A

RECEIVER

EOL (dBm)

OPTICAL PATH BETWEEN


S&R

Table 4-20: SFP+ bidirectional client transceivers


SFP+ TRANSCEIVER NAME

OTP10_S27BD

OTP10_S33BD

OTP10_L27BD

OTP10_L33BD

APPLICATION CODE98

10GBASE-S27BD

10GBASE-S33BD

10GBASE-L27BD

10GBASE-L33BD

98

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

4-47

NPT Product Line System Specifications

NPT-1200 Specifications

SFP+ TRANSCEIVER NAME

OTP10_S27BD

OTP10_S33BD

OTP10_L27BD

OTP10_L33BD

Source type

CWDM DFB

CWDM DFB

CWDM DFB

CWDM DFB

Modulation

N/A

N/A

N/A

N/A

Operating output wavelength (nm)

1260-1280

1320-1340

1260-1280

1320-1340

Direct max.-20 dB width (nm)

N/A

N/A

N/A

N/A

Min. side mode suppression ratio (dB)

30

30

30

30

Min. mean launched power (dBm)

-5

-5

Max. mean launched power (dBm)

Min. extinction ratio (dB)

3.5

3.5

3.5

3.5

Maximum attenuation (dB)

19

19

Minimum attenuation (dB)

10

10

Max. dispersion (ps/nm)

N/A

N/A

N/A

N/A

Maximum optical return loss (dB)

12

12

12

12

Maximum discrete reflectance

-12

-12

-12

-12

Maximum DGD (ps)

N/A

N/A

N/A

N/A

Sensitivity (BER of 1*10 12) (dBm)

-14

-14

-18

-18

Min. overload (dBm)

05

0.5

-5

-5

Maximum optical path penalty

3.2

3.2

3.2

3.2

OCH switching time (ms)

N/A

N/A

N/A

N/A

Table 4-21: SFP+ C/DWDM transceivers


SFP+ TRANSCEIVER NAME

OTP10C_PSxx

OTP10D_ALxx

APPLICATION CODE99

PS

AL

Operating wavelength (nm)

1471, 1491, 1511, 1531, 1551, 1571, 1591,


1611

1529.55-1561.61

Source type

CWDM DFB

DWDM EML

Modulation

TRANSMITTER

Spacing (GHz)

100

Max. -20 dB width (nm)

Min. side mode suppression (dB)

30

30

Min. mean launched power (dBm)

-4.7

-1

99

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

4-48

NPT Product Line System Specifications

NPT-1200 Specifications

SFP+ TRANSCEIVER NAME

OTP10C_PSxx

OTP10D_ALxx

Max. mean launched power (dBm)

+4

+3

Min. extinction ratio (dB)

8.2

Max. attenuation (dB)

11.1

22

Min. Attenuation (dB)

10

Min. sensitivity (BER of 1*10-12)

-15.8

-23

Min. overload (dBm)

-1

-7

Max. receiver reflectance (dB)

-26

-27

Max. dispersion [ps/nm]

800

1600

Min. optical return loss of cable (dB)

21

27

Max. discrete reflectance (dB)

Max. optical path penalty (dB)

3.5

OCH switching time (ms)

RECEIVER

EOL (dBm)

OPTICAL PATH BETWEEN S & R

Parent Topic
4.12 Ethernet Specifications

4.13.26 CSFP Client Transceivers


Table 4-22: CSFP client transceivers
CSFP TRANSCEIVER

CTGBE_S3S5

CTGBE_S5S3

CTGBE_L3L5

CTGBE_L5L3

CTGBE_E3E5

CTGBE_E5E3

APPLICATION CODE100

S3S5

S5S3

L3L5

L5L3

E3E5

E5E3

Operating wavelength (nm)

1310

1490

1310

1490

1310

1490

Source type

FP

DFB

FP

DFB

DFB

DFB

Max. RMS width (nm)

3.5

3.5

Min. side mode suppression (dB)

30

30

Min. mean launched power (dBm)

-9

-9

-8

-8

-5

-5

Max. mean launched power (dBm)

-3

-3

-2

-2

TRANSMITTER

100

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

4-49

NPT Product Line System Specifications

NPT-1200 Specifications

CSFP TRANSCEIVER

CTGBE_S3S5

CTGBE_S5S3

CTGBE_L3L5

CTGBE_L5L3

CTGBE_E3E5

CTGBE_E5E3

Min. extinction ratio (dB)

-20

-20

-22.5

-22.5

-24

-24

Min. overload (dBm)

-3

-3

-2

-2

Max. receiver reflectance (dB)

Max. dispersion [ps/nm]

Min. optical return loss of cable (dB)

Max. discrete reflectance (dB)

Max. optical path penalty (dB)

RECEIVER
Min. sensitivity (BER of 1*10-12)
EOL (dBm)

OPTICAL PATH BETWEEN S & R

Parent Topic
4.12 Ethernet Specifications

4.13.27 Electrical GbE SFP (ETGbE)


ETGBE

Notes

Data rate

10/100/1000 Mbps

IEEE 802.3 compatible

Connector

RJ-45

Cable type

CAT 5

Cable length

100m

Parent Topic
4.12 Ethernet Specifications

4.14 MXP10 Base Card Configurations


Card

No. of
ESlots

Function/
Description

MXP10

Base card for multirate combiner, transponder or ADM on Card supporting 12 CSFP
(6 x SFP) ports of GbE, FC1/2/4, STM-1/4/16/64, OTU1. Supports FEC and EFEC on
the line side.

ECI Telecom Ltd. Proprietary

4-50

NPT Product Line System Specifications

NPT-1200 Specifications

Parent Topic
4 NPT-1200 Specifications

4.14.1 MXP10 Base Card Modules and Transceivers


Card

Function/
Description

Client module and transceivers for MXP10


OM_AOC4

Optical module for up to 4 x SFP based ports , one module per MXP10 card

Line transceivers for MXP10


OTP10C_PSxx

Optical OTU2/OTU2e/STM64/10GE/FC-1200 transceiver, CWDM

OTP10D_ALxx

Optical OTU2/OTU2e/STM64/10GE/FC-1200 transceiver, DWDM

OTP10T_AL

Tunable SFP+

OTPMR10

Multi-rate SFP+ for OTU2/OTU2e/STM64/10GE/FC-800/FC-1200

Client SFP transceivers for MXP10


OTGBE_SX

Optical GbE/FC/FICON transceiver, short reach, 850 nm multimode fiber

OTGBE_LX

Optical GbE/FC/FICON transceiver, long reach, 1310 nm single mode fiber

OTGBE_ZX

Optical GbE/FC/FICON transceiver, very long reach, 1550 nm single mode fiber

OTGBE_S3BD

Bi-directional GbE SFP with 1310nm TX/1490nm Rx. Short Range (10km)

OTGBE_S5BD

Bi-directional GbE SFP with 1490nm TX/1310nm Rx. Short Range (10km)

OTR16_I3

STM-16/OC-48 transceiver, intra-office 1310 nm

OTR16_S3

STM-16/OC-48 transceiver, short-haul 1310 nm

OTR16_L3

STM-16/OC-48 transceiver, long-haul 1310 nm

OTR16_L5

STM-16/OC-48 transceiver, long-haul 1550 nm

OTC25_PSxx

2.7 Gbps CWDM transceiver (with or without outband FEC), short haul with PIN receiver

OTC25_ALxx

2.7 Gbps CWDM transceiver (with or without outband FEC), long haul with APD receiver

OTR25_AVxx

DWDM SFP: 2.5/2.7G transceiver 2400 ps/nm, channel xx, LC connectors

OTR25_ABxx

DWDM SFP: 2.5/2.7G transceiver 3240 ps/nm, channel xx, LC connectors

Parent Topic
4.13 MXP10 Base Card Configurations

ECI Telecom Ltd. Proprietary

4-51

NPT Product Line System Specifications

NPT-1200 Specifications

4.15 Optical Amplifier Modules


The OM_BA is an optical booster for the C Band. OM_PA is a preamplifier for the C Band. OM_ILA is an
optical amplifier optimized for in-line sites for links of up to 500 km with up to 80 channels (supports all C
Band channels). The amplifiers are housed in a dedicated Optical Base Card (OBC) that can be installed in
the EXT-2U shelf. For more details regarding the OBC, OM_BA, OM_PA, and OM_ILA refer to the NPT
Reference Manual.
Table 4-23: Optical amplifier specifications
Parameter

OM_BA (Single
Channel)

OM_PA (Single
Channel)

OM_ILA
(DWDM)

Input power (dBm)

-7 +4

-35 - -18

-24 - +6

Output power (dBm)

10 - 15

-12

-4 - +16

Spectrum (nm)

1528.8 1564.2

1549.32

1528.8 1564.2

Gain tilt (Ch. 21-36) (dB)

<3

Gain tilt (Ch. 21-60) (dB)

<7

Passband width, < 0.5 dB loss (GHz)

N/A

N/A

N/A

Passband width, < 1.0 dB loss (GHz)

N/A

N/A

N/A

Noise figure (dB)

< 9.8

<6

<8.0+(21-Gain)

Polarization-dependent gain (dB)

< 0.5

< 0.5

< 0.3

Polarization mode dispersion (ps)

< 0.5

< 0.5

< 0.25

Return loss (dB)

> 40

> 40

> 45

Power consumption (Watt)

<8

<8

< 18

Monitor port tap fraction (%)

N/A

N/A

N/A

Automatic Laser Shutdown (ALS)

< 150 ms

< 150 ms

< 150 ms

-2 - 0

Parent Topic
4 NPT-1200 Specifications

4.16 Dispersion Compensation Modules


The OM_DCMxx are dispersion compensation modules used to correct excessive dispersion on long fibers.
The modules are housed in a dedicated Optical Base Card (OBC) that can be installed in the EXT-2U shelf.
For more details regarding the OBC, and OM_DCMxx refer to NPT Reference Manual.

NOTE:

The suffix xx in the module name designates the distance (nominal compensation
length) in km.

ECI Telecom Ltd. Proprietary

4-52

NPT Product Line System Specifications

NPT-1200 Specifications

The following section provides the OM_DCMxx modules specifications.


Operating wavelength

1549.32 nm

Return Loss:

> 50 dB

Connector

LC

Fiber

G.652

Table 4-24: OM_DCMxx specifications


Nominal compensation length

Typical dispersion @ 1549.32 nm [ps/nm]

Max. insertion loss [dB]

40 - 60 km

960

2.65

80 - 100 km

1600

2.65

100 - 120 km

1920

2.65

Parent Topic
4 NPT-1200 Specifications

4.17 EM_10E Specifications


Interfaces

FXO, FXS, 2W, 4W, 6W, E&M, V.11


V.24, V.35, V.36, Codir 64 Kbps, Omni 64Kbit/s,
C37.94, RS-422, RS-449

DS-0 cross-connect capacity

682

Number of CES E1 uplinks

16

CES service

Unstructured E1 (SAToP)
Channelized E1 (CESoPSN)

Number of CES service

16

Encapsulation Protocol

CESoETH, CESoMPLS

CES clock recovery mechanism

Adaptive
Differential

Reference clock frequency for DCR


RTP timestamp

19.44 MHz
25 MHz

Tx Timing mode

Recovered from CES stream


System timing
Loop timing

Payload time

125~8000us@125us

Jitter buffer Max delay var

1000-64000 @1000 sec

Jitter buffer Min latency

500-32000 @500 sec

ECI Telecom Ltd. Proprietary

4-53

NPT Product Line System Specifications

Standards compliance

NPT-1200 Specifications

G.703, G.704, G.732, G.735, G.736, G.796, IEEE C37.94


V.11, V.24, V.28, V.110, V.14
IETF RFC4553, RFC5086
MEF8, MEF3
ITU-T Y.1413, G.703

Parent Topic
4 NPT-1200 Specifications

4.18 SM_10E Specifications


Interfaces

FXO, FXS, 2W, 4W, 6W, E&M, V.11, V.24, V.35, V.36, Codir 64Kbit/s, Omni
64Kbit/s, EOP, C37.94, RS-422, RS-449

DS-0 cross-connect capacity

1178

Number of E1 uplinks

32 (framed)
12 (unframed)

Standards compliance

G.703, G.704, G.732, G.735, G.736, G.796, V.11, V.24, V.28, V.110, V.14,
G.7041 (GFP), G.7043 (PDH VCAT), G.8040 (GFP mapping into PDH) IEEE
C37.94

Parent Topic
4 NPT-1200 Specifications

4.18.1 SM_10E Total Capacity


44 x E1 capacity

32 x E1 to the 1/0 XC + 12 x E1 directly to the modules

Parent Topic
4.17 SM_10E Specifications

4.18.2 SM_10E DXC1/0 XC Capacity


Capacity

1178 x DS-0 bidirectional (32 x E1 from SDH matrix + 6 x E1 from modules)

Functionality

64 Kbps timeslot interchange

CAS XC

CAS configuration in accordance with corresponding voice channels

Parent Topic
4.17 SM_10E Specifications

ECI Telecom Ltd. Proprietary

4-54

NPT Product Line System Specifications

NPT-1200 Specifications

4.18.3 EM_10E Total Capacity


22 x E1 capacity

16 x E1 to the 1/0 XC + 6 x E1 directly to the modules

Parent Topic
4.17 SM_10E Specifications

4.18.4 EM_10E DXC1/0 XC Capacity


DS0 XC Matrix

682 x DS-0 bidirectional


(16 x CES E1 + 6 x E1 from modules)

E1 XC Matrix

16 x CES E1 + 16 x E1 from DS0 XC Matrix + 12 x E1 directly to the modules

Functionality

64 Kbps timeslot interchange between modules and CES E1

CAS XC

CAS configuration in accordance


with corresponding voice channels

Parent Topic
4.17 SM_10E Specifications

4.18.5 Timing
Any of the following clock sources can be selected as a timing reference:

Any Dslot (SM_CODIR_4E, SM_V35_V11)

Internal clock source

SDH distributed timing

Two of 32 possible clocks derived from the cards E1 mappers and framers (SM_10E only)

Two of 16 possible clocks recovered from CES E1 (EM_10E only)

Parent Topic
4.17 SM_10E Specifications

ECI Telecom Ltd. Proprietary

4-55

NPT Product Line System Specifications

NPT-1200 Specifications

4.18.6 FXO/FXS Interface


Maximum number of channels

8 (per module)

Impedance

600 W balanced

ITU-T standards compliance

G.711 and G.712

PCM Coding

A-Law

Additional specifications are shown in the following table.


Table 4-25: FXO and FXS specifications
Characteristic
Main characteristic

FXO

FXS

< 100 mA

25 mA

Subcharacteristic

DC current loop
Line loop DC resistor
Return loss 300-3,400 Hz

Total harmonic distortion


D A and A D

Unbalance relative to ground


Idle channel noise
Hook detection time
Gain
Digital pulse supported width
Transmission distance

< 2000
300-500 Hz

> 14 dB

> 14 dB

500-2,000 Hz

> 18 dB

> 18 dB

2,000-3,400 Hz

> 14 dB

> 14 dB

-45 dBm0

> 24 dB

> 24 dB

-40 dBm0

> 29 dB

> 29 dB

-30 dBm0

> 35 dB

> 35 dB

-20 dBm0

> 35 dB

> 35 dB

-10 dBm0

> 35 dB

> 35 dB

0 dBm0

> 35 dB

> 35 dB

300-600 Hz

> 40 dB

> 40 dB

600-3,400 Hz

> 46 dB

> 46 dB

AD

< -65 dB

< -65 dB

DA

< -67 dB

< -67 dB

Minimum

2 msec

2 msec

Maximum

Unlimited

Unlimited

Rx

-3.5 dB

-3.5 dB

Tx

0 dB

0 dB

Sample rate

500 Hz

Minimum width

2 msec

0.4 mm cables

~ 4 km

0.5 mm cables

~ 6 km

Parent Topic
4.17 SM_10E Specifications
ECI Telecom Ltd. Proprietary

4-56

NPT Product Line System Specifications

NPT-1200 Specifications

4.18.7 Ringer Characteristics


Total power

10 W

Maximum load

12 REN

Voltage

75 V RMS

Frequency

25 Hz

Parent Topic
4.17 SM_10E Specifications

4.18.8 2 Wire/4 Wire/6 Wire and E&M Interface


Maximum number of channels

6 (per module)

Impedance

600 ohm balanced

Signaling type

Types V

Far end Cross Talk (2W&4W)

-65 dB

Go-To-Return Cross Talk (4W)

-60 dB

Signaling Impedance

> 15 K ohm

Signaling Sensitivity

> 2.5 mA

Return Loss - 2W

300Hz600Hz >12dB, 600Hz3400Hz >15dB

Return Loss - 4W

300Hz3400Hz >20dB

Tx levels

4W: -11 dBm ~ +1 dBm (software-configurable with 1 dB granularity)


2W: 0 dBr 1 dB

Rx levels

4W: -11 dBm ~ -1 dBm (software-configurable with 1 dB granularity)


2W: -3.5 dBr 1 dB

ITU-T standards compliance

G.711 and G.712

Parent Topic
4.17 SM_10E Specifications

4.18.9 Codir_4E Interface


Maximum number of channels

4 (per module)

Impedance

120 ohm balanced

Standard Compliance

G.703-64 Kbps co-directional interface

Parent Topic
4.17 SM_10E Specifications

ECI Telecom Ltd. Proprietary

4-57

NPT Product Line System Specifications

NPT-1200 Specifications

4.18.10 OMNI_E Interface


Maximum number of 2W/4W channels

4 (per module)

Maximum number of conference groups

Maximum number of members in each conference


group

60

Parent Topic
4.17 SM_10E Specifications

4.18.11 V.24 Interface


Maximum number of
channels

8 in Transparent mode
4 in Asynchronous mode
2 in Synchronous mode

Bit rate

50 bps-19.2 Kbps in Transparent mode 0.6 Kbps, 1.2 Kbps, 2.4 Kbps,
4.8 Kbps, 9.6Kbps, 19.2 Kbps, 38.4Kbps,
57.6 Kbps (HCM) in Asynchronous mode
0.6 Kbps, 1.2 Kbps, 2.4 Kbps, 4.8 Kbps, 9.6Kbps, 19.2 Kbps, 38.4 Kbps,
57.6Kbps in HCM mode, 64 Kbps, in Synchronous mode

Modes of operation

Transparent, Asynchronous, Synchronous

Standards compliance

ITU-T V28, ITU-T V110, ITU-T V14

Parent Topic
4.17 SM_10E Specifications

4.18.12 V.35 Interface


Maximum number of channels 2 (per module)
Bit rate

N x 64 K (N = 131)
2Mb/s (Unframed)

Standards compliance

ITU-T V.28, ITU-T V.35

Parent Topic
4.17 SM_10E Specifications

4.18.13 V.36 Interface


Maximum number of channels

2 (per module)

Bit rate

N x 64 K (N = 131)
2Mb/s (Unframed)

ECI Telecom Ltd. Proprietary

4-58

NPT Product Line System Specifications

Standards compliance

NPT-1200 Specifications

ITU-T V.11, V.10, V.36

Parent Topic
4.17 SM_10E Specifications

4.18.14 V.11 Interface


Maximum number of channels 2 (per module)
Protocol

X.24, X.21

Bit rate

N x 64 K (N = 131)
2Mb/s (Unframed)

Standards compliance

ITU-T V11, X.24, X.21

Parent Topic
4.17 SM_10E Specifications

4.18.15 RS-422/449 Interface


Maximum number of channels 2 (per module)
Protocol

X.24, X.21

Bit rate

N x 64 K (N = 131)
2Mb/s (Unframed)

Standards compliance

EIA-449, TIA-422-B

Parent Topic
4.17 SM_10E Specifications

4.18.16 SM_C37.94 Interface


Maximum number of channels

2 (per module)

Supported protocol

IEEE C37.94

Bandwidth

N x 64 Kbps, N=1 to 12

Optical interface wavelength

840 to 860 m

Supported fibers

50/62.5 m MMF

Optical interface rate

2048 Kbps

Tx and Rx fiber optic heads

850 nm multimode LED

Connectors type

BFOC/2.5 (ST)

ECI Telecom Ltd. Proprietary

4-59

NPT Product Line System Specifications

NPT-1200 Specifications

Parent Topic
4.17 SM_10E Specifications

4.18.16.1 C37.94 Transceiver Specifications


Transmit optical power

-11~-23 dBm (50 m MMF), -11~-19 dBm (62.5 m MMF)

Receiver sensitivity

-11~-32 dBm

Parent Topic
4.17.16 SM_C37.94 Interface

4.18.17 SM_C37.94S Specifications


This section describes the specifications for SM_C37.94S

Parent Topic
4.17 SM_10E Specifications

4.18.17.1 General
Maximum number of channels per
module

Maximum number of channels per


card

Maximum number of channels per


shelf

18

Power consumption

3W

Parent Topic
4.17.17 SM_C37.94S Specifications

4.18.17.2 C37.94S Interface


Supported protocol

IEEE C37.94

Bandwidth

N x 64 Kbps, N=1 to 12

Optical interface wavelength

760 to 860 nm

Fiber types

50/125 m MMF Multimode

Optical interface rate

2048 Kbps

Connectors type

LC (SFP based)

Parent Topic
4.17.17 SM_C37.94S Specifications
ECI Telecom Ltd. Proprietary

4-60

NPT Product Line System Specifications

NPT-1200 Specifications

4.18.17.3 C37.94S SFP Based Transceiver Specifications


Transceiver form

SFP

Transmit optical power

-11~-23 dBm (50 m MMF), -11~-19 dBm (62.5 m MMF)

Receiver sensitivity

-11~ -32 dBm

Parent Topic

4.17.17 SM_C37.94S Specifications

4.18.18 SM_EoP
NOTE: The following is for SM_10E only
Interface type

10BaseT/100BaseT

Standards compliance IEEE802.3, IEEE802.3u G.704, G.7043 (PDH VCAT), G.8040 (GFP mapping into PDH)

Parent Topic

4.17 SM_10E Specifications

4.18.18.1 SM_EoP Ethernet Interface


Channels per module

Interface type

10BaseT/100BaseT

Bandwidth

N x 64 Kbps (N = 1-32) or 1-4 x E1

Encapsulation

HDLC for N x DS-0


GFP over PDH (G.8040) for N x E1

Virtual concatenation for N x E1 as per G.7043

VCAT over PDH

LCAS

Supported as per G.7042

Parent Topic
4.17.18 SM_EoP

4.19 Physical Specifications


This section describes the physical specifications of the product.

Parent Topic
4 NPT-1200 Specifications

4.19.1 Dimensions (H x W x D)
NPT-1200 shelf

ECI Telecom Ltd. Proprietary

88.9 mm x 442.4 mm x 243 mm

4-61

NPT Product Line System Specifications

NPT-1200 Specifications

MCP1200

20 mm x 181 mm x 222 mm

CPTS100

20 mm x 210 mm x 222 mm

CPS100

20 mm x 210 mm x 222 mm

XIO64

20 mm x 210 mm x 222 mm

XIO16_4

20 mm x 210 mm x 222 mm

INF_1200

31 mm x 76 mm x 222 mm

FCU_1200

86 mm x 44 mm x 222 mm

EXT-2U shelf

88.9 mm x 443.4 mm x 243 mm

EXT-2U shelf traffic card

26 mm x 283 mm x 222 mm

INF_E2U

26 mm x 111 mm x 222 mm

FCU_E2U

85 mm x 40 mm x 222 mm

Racks

2200/2600 mm x 600 mm x 300 mm

Parent Topic
4.18 Physical Specifications

4.19.2 Weight
NPT-1200 fully populated

8 kg

EXT-2U fully populated

7.5 kg

Parent Topic
4.18 Physical Specifications

4.19.3 Power
Applicable specification

ETSI 300 132-2

Input DC voltage

-40 VDC to -72 VDC

Nominal DC power source

-48 VDC

NPT-1200 power consumption

Maximum 550 W

EXT-2U power consumption

Maximum 511 W (including PoE)

Parent Topic
4.18 Physical Specifications

4.19.4 INF-1200
DC input voltage

-48 VDC to -70 VDC

Maximum output load power

550 W

ECI Telecom Ltd. Proprietary

4-62

NPT Product Line System Specifications

NPT-1200 Specifications

Working temperature

-25 C to +70 C

Storage temperature range

-40 C to +70 C

Parent Topic
4.18 Physical Specifications

4.19.5 INF_E2U
DC output voltage

-48 VDC to -70 VDC

Maximum output load power 511 W (including PoE)


Working temperature

-25 C to +70 C

Storage temperature range

-40 C to +70 C

Parent Topic
4.18 Physical Specifications

4.19.6 AC_PS-E2U
AC input voltage range

100 VAC to 240 VAC; 50 Hz/60 Hz

DC output voltage

-48 VDC to -70 VDC

Maximum output load power

200 W

Working temperature

-5 C to +55 C

Storage temperature range

-40 C to +70 C

Parent Topic
4.18 Physical Specifications

4.19.7 NPT-1200 Power Consumption


Table 4-26: Power Consumption
Type

Component name

Common cards

MCP1200

12.3 W

CPTS100

119 W

CPS100

69 W

XIO64

40 W

ECI Telecom Ltd. Proprietary

Power requirements

XIO16_4

42.2 W

FCU_1200

45.6 W

4-63

NPT Product Line System Specifications

Type

Component name

NPT-1200 Specifications

Power requirements

INF_1200

20 W

Tslot modules

PME1_21

7.7 W

(SDH/PDH)

PME1_63

14.6 W

PM345_3

4.8 W

SMQ1

13.8 W

SMQ1&4

14.6 W

SMS16

12.8 W

DMFE_4_L1

9.6 W

DMFX_4_L1

12.1 W

DMEoP_4

9.2 W

DMFE_4_L2

13.3 W

DMFX_4_L2

16.8 W

DMGE_4_L1

33.6 W

DMGE_2_L2

25 W

DMGE_4_L2

43.8 W

DMGE_8_L2

49 W

DMXE_48_L2

88.3 W

DMXE_22_L2

48.5 W

(Ethernet/EoS/MoT)

(CES)

(Ethernet)

Expansion unit

ECI Telecom Ltd. Proprietary

DMCES1_4

25 W

MSE1_16

13 W

DHGE_4E

11.8 W

DHXE_2

23 W

DHGE_8

17.8 W

DHGE_16

25.4 W

DHGE_24

45.5 W

EXT-2U shelf with fans

18.7 W

INF_E2U

15 W

AC_PS-E2U

20 W

4-64

NPT Product Line System Specifications

Type
Expansion cards

Component name

NPT-1200 Specifications

Power requirements

FCU_E2U

18.7 W

PE1_63

16.9 W

P345_3E

8.8 W

S1_4

11.6 W

EM_10E base card

13.1 W

MPS_2G_8F

31.2 W

DMCE1_32

21.6 W

MPoE_12G

43.5 W

Optical base card (OBC)

8W

SM_10E base card

6.8 W

DHFE_12

12 W

DHFX_12

20.5 W

MXP10

38.2 W

MXP10 module

OM_AOC4

5W

OBC modules

OM_BA

11 W

OM_PA

10 W

OM_ILA

18 W

EM_10E/SM_10E modules

ECI Telecom Ltd. Proprietary

SM_FXS_8E

1 W (all idle)
10 W (all busy

SM_FXO_8E

1 W (all idle)
2.5 W (all busy)

SM_EM_24W_6E

1 W (all idle)
2.8 W (all busy)

SM_V24E

0.8 W (all idle)


3.2 W (all busy)

SM_V35_V11

1.5W (2 x V.35)
3.5W (2 x V.11)

SM_CODIR_4E

0.8 W (all idle)


1.8 W (all busy)

SM_OMNI_E

1.5 W

SM_EOP (for SM_10E only)

8.1 W
4-65

NPT Product Line System Specifications

Type

Protection cards

SFP transceivers

Component name

3W

SM_C37.94S

3W

TP63_1

1.4 W

TPS1_1

1.4 W

TPEH8_1

2.2 W

OTR1_YY

1W

OTR4_YY

1W

OTR16_YY

1W

OTR25_xx

1.5 W

OTC25_ALxx

1.6 W

OTC25_PSxx

1.6 W

OTFE_SM

1W

OTFE_MM

1W

OTGBE_SX

1W

OTGBE_LX

1W

OTGBE_ZX

1W

CTGBE_LxLx

1W

CTGBE_SxSx

1W

ETGBE

1W

OTR64_PS3/PS5

ECI Telecom Ltd. Proprietary

Power requirements

SM_C37.94

OTR64_PI3

SFP+

NPT-1200 Specifications

2.5 W
3W

OTR64_AL5/DW35L

3.5 W

OTR10_ALxx/ASxx

1.5 W

OTC10_ALxx/PSxx

1.5 W

OTP10_xx

1.5 W

OTR10T_AL

3.5 W

OTRN10_AL

5W

OTP10_SR

0.9 W

4-66

NPT Product Line System Specifications

Type

Component name

NPT-1200 Specifications

Power requirements

OTP10_LR

0.9 W

OTP10_ZR

1.5 W

OTP10_LRM

1W

OTP10C_xx

1.5 W

OTP10D_xx

1.5 W

OTP10_xxBD

1.5 W

OTP10T_AL

1.5 W

OTP10T_17

1.7 W

Table 4-27 Power Dissipation


Power dissipation
Typical 683 Btu/hour; maximum 1229 Btu/hour

Parent Topic
4.18 Physical Specifications

4.19.8 (NPT-1200) Environmental Conditions


This section describes the environmental condition for operating, storing, handling and transporting the
product.

NOTE:

Extended temperature range of -25 C to +70 C is supported. However, before


installing the NPT-1200 in a street cabinet, consult the PLM at ECI.

Parent Topic
4.18 Physical Specifications

4.19.8.1 Operation
Applicable specification

ETSI-300-019-2-3 Class 3.3

Temperature range

-25C to +70C

Relative humidity

5% to 95%

Parent Topic
4.18.8 (NPT-1200) Environmental Conditions

4.19.8.2 Storage (Packed)


Applicable specification
ECI Telecom Ltd. Proprietary

ETS-300-019-2-1 Class 1.2


4-67

NPT Product Line System Specifications

Temperature range

-40C to +70C

Relative humidity

10% to 100%

NPT-1200 Specifications

Parent Topic
4.18.8 (NPT-1200) Environmental Conditions

4.19.8.3 Handling and Transportation


Applicable specification

ETS-300-019-2-2 Class 2.2

Temperature range

-40C to +70C

Relative humidity

up to 95%

Parent Topic
4.18.8 (NPT-1200) Environmental Conditions

4.19.9 EMC
Applicable specifications

EN 300 386/2000

Applicable directive

EMC directive 89/336 EEC

Parent Topic
4.18 Physical Specifications

4.19.10 Safety
Applicable specifications

EN 60950/2000

Applicable CE directive

LVD directive 73/23/EEC

Parent Topic
4.18 Physical Specifications

4.19.11 Laser Safety


Applicable specification

IEC 60825-1&2 (AS/NZS 2211.2)

Parent Topic
4.18 Physical Specifications

4.19.12 Reliability
This section describes the reliability of the NPT-1010 platform with respect to product life and availability.

ECI Telecom Ltd. Proprietary

4-68

NPT Product Line System Specifications

NPT-1200 Specifications

Parent Topic
4.18 Physical Specifications

4.19.12.1 Life
Expected lifetime of the NPT-1200

15 years

Parent Topic
4.18.12 Reliability

4.19.12.2 Availability
Availability of service for an end-to-end service trail
passing through a protected SDH network

better than 99.999%

Parent Topic
4.18.12 Reliability

ECI Telecom Ltd. Proprietary

4-69

NPT-1021 Specifications

5.1

NPT-1021 Shelf Capacity

The NPT-1021 is designed around a centralized packet switch card that supports any to any direct data card
connectivity. The NPT-1021 offers a packet switching capacity of up to 10 Gbps or 50 Gbps (with a choice of
two modes on the same unit).

Parent Topic
5 NPT-1021 Specifications

5.2

Cross-Connect Specifications

This section describes the cross-connect specifications for the NPT-1021.

Parent Topic
5 NPT-1021 Specifications

5.3

Switching Specifications

Switching capacity

10 Gbps

MPLS processing (IMIX)

10 Gbps

Switching capacity with CPS50

60 Gbps

MPLS processing with CPS50 (IMIX)

60 Gbps

Parent Topic
5 NPT-1021 Specifications

5.4

Redundancy

DC power system

INF-B1U/INF-E2U 1+1 redundancy

Parent Topic
5 NPT-1021 Specifications

ECI Telecom Ltd. Proprietary

5-1

NPT Product Line System Specifications

5.5

NPT-1021 Specifications

Synchronization

There are five types of timing references available from SDH/PDH multiple timing sources:

From any GbE port that supports synchronous Ethernet

An external input/output of 2.048 MHz or 2.048 Mbps

G.813 internal clock, free-run, accuracy of 4.6 ppm

1588v2 PTP Ordinary Clock

Synchronization Status Message (SSM) support is provided

Parent Topic
5 NPT-1021 Specifications

5.6

IEEE 1588v2 Specification

Supported types of 1588v2 PTP Clock

Ordinary clock (master or slave)


Boundary clock (BC)
Two-step E2E Transparent Clock (TC)

Grandmaster work mode

Unicast, two-step

Maximal aggregated unicast packet rate of OC master

2000 pps

Max number of slave clocks supported per master

64101

Synchronization source of master

1PPS/ToD
System clock (T0 of SEC/EEC TMU)
Any Sync-E port of central PE
Local OCXO

Synchronization transport

Frequency
Phase (with 1PPS) and time (with ToD)

Type of PTP clock interface

1 x 1PPS
1 x ToD

Connector type of 1PPS and ToD interface

RJ-45

Electrical characteristic of 1PPS and ToD interface

RS-422/V.11

PTP message encapsulation

UDP/IPv4

ToD message format

GPRMC

Standards compliance

IEEE 1588v2

Parent Topic
5 NPT-1021 Specifications

101

Depends on the network conditions and PTP protocol configuration, and limited by 2000 pps budget.

ECI Telecom Ltd. Proprietary

5-2

NPT Product Line System Specifications

5.7

NPT-1021 Specifications

Throughput Test - RFC2544

Number of RFC2544 test port

Max test rate

1000Mbps

Test rate granularity

64Kbps~960Kbps@64Kbps, 1Mbps~Max rate@100Kbps

Transmit frame size

Fixed (64~1522B)
IMIX

IMIX types

Standard IMIX
G.8261 IMIX1
G.8261 IMIX2
User defined IMIX

Performance test

Frame loss (Latency and jitter test is not supported)

5.8

Acoustic Noise

Acoustic noise

53 dBA

Parent Topic
5 NPT-1021 Specifications

5.9

Traffic Protection

ERPS

within 50 ms

1:1 linear protection

within 50 ms

Dual FRR (Fast ReRoute)/FRR

within 50 ms

LAG 1:1

within 50ms (static)


within 100ms (LACP)

PW redundancy

within 50 ms

Parent Topic
5 NPT-1021 Specifications

5.10 Jitter and Wander


Applicable specifications ITU T G.823, G.825

Parent Topic
5 NPT-1021 Specifications

ECI Telecom Ltd. Proprietary

5-3

NPT Product Line System Specifications

NPT-1021 Specifications

5.11 I/O Interfaces


This section describes the specifications for the I/O interfaces.

Parent Topic
5 NPT-1021 Specifications

5.11.1 2.048 Mbps (E1)


Physical level

G.703, Paragraph 6/s 50ppm

Frame options

Unframed, framed (ITU-T G.704)

Line code

HDB3

Line impedance

120 balanced 5%

Parent Topic
5.10 I/O Interfaces

5.11.2 1.544 Mbps (T1)


Physical level

ANSI T1.403-1999

Frame options

Unframed, framed (ANSI T1.107-2002 [R2006])

Line code

AMI/B8ZS

Line impedance

100 balanced

Parent Topic
5.10 I/O Interfaces

5.11.3 STM-1 Electrical


Physical level

G.703, Paragraph 12

Bitrate

155.52 Mbps 20 ppm

Frame

G.707

Line code

CMI

Parent Topic
5.10 I/O Interfaces

ECI Telecom Ltd. Proprietary

5-4

NPT Product Line System Specifications

NPT-1021 Specifications

5.11.4 STM-1 Optical


Physical level

G.957, Table 2

Wavelength

1310 nm, 1550 nm

Bitrate

155.52 Mbps 4.6 ppm

Transmission range

S3, L3, L5, X3, X5, VL5

Parent Topic
5.10 I/O Interfaces

5.11.5 STM-4 Optical


Physical level

G.957, Table 3

Wavelength

1310 nm, 1550 nm

Bitrate

622 Mbps 4.6 ppm

Transmission range

S3, L3, L5, V5

Parent Topic
5.10 I/O Interfaces

5.12 Management
Applicable specifications

G.784, G.774, M.3010, M.3100

LightSoft (ECI Telecom Network


Manager) server and client for
managing all ECI Telecom
equipment

on SUN workstation(s)

EMS-APT (element manager)

on PC or SUN workstation(s)

LCT-APT (local craft terminal)

on PC

Parent Topic
5 NPT-1021 Specifications

5.12.1 Management and Alarm Interfaces


CMIP-like over TCP/IP to EMS-APT
SNMP V3 to third-party SNMP-based management solution (monitoring only)
MTNM from EMS-APT to LightSoft or other TMN
10/100BaseT to LCT-APT
Rack Alarm Panel

Parent Topic
5.11 Management
ECI Telecom Ltd. Proprietary

5-5

NPT Product Line System Specifications

NPT-1021 Specifications

5.12.2 Alarms and Performance


Performance concept

ITU-T G.821, G.826, Bellcore GR-820-CORE

Alarm concept

G.783

Alarm types

LED indicators, dry contacts,


(per subrack), external alarm inputs and outputs

Alarm classes

Critical, Major, Minor, Warning

Parent Topic
5.11 Management

5.13 SDH Interfaces


This section describes the specifications for the SDH interfaces.

Parent Topic
5 NPT-1021 Specifications

5.13.1 STM-1 (155.52 Mbps 4.6 ppm)


Table 5-1: STM-1 interface
SFP transceiver name

OTR1_S3

OTR1_L3

OTR1_L5

OTR1_X3

OTR1_X5

OTR1_VL5

OTR1_VLC5

Application code102

S-1.1

L-1.1

L-1.2

Operating wavelength (nm)

1261-1360

1263-1360

1480-1580

1270-1360

1500-1520

1500-1520

1544.5-1557.5

Source type

MLM

SLM

SLM

SLM

SLM

SLM

SLM

Max. RMS width (nm)

7.7

Min. side mode suppression


ratio (dB)

30

30

30

> 30

> 30

30

Min. mean launched power


(dBm)

-15

-5

-5

+5

Max. mean launched power


(dBm)

-8

+5

+5

Min. extinction ratio (dB)

8.2

10

10

10

10

10

10

-28

-34

-34

-37

-35

-42

-42

TRANSMITTER

RECEIVER103
Min. sensitivity (BER of
-12

1 * 10 ) EOL (dBm)

102

Application code is in reference to ITU-T Recommendation G.691.

103

Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.

ECI Telecom Ltd. Proprietary

5-6

NPT Product Line System Specifications

NPT-1021 Specifications

SFP transceiver name

OTR1_S3

OTR1_L3

OTR1_L5

OTR1_X3

OTR1_X5

OTR1_VL5

OTR1_VLC5

Application code102

S-1.1

L-1.1

L-1.2

Min. overload (dBm)

-8

-10

-10

-8

-8

-5

-7

Max. receiver reflectance


(dB)

-25

Max. dispersion (ps/nm)

96

Min. optical return loss of


cable (dB)

-20

-20

Max. discrete reflectance (dB -

-25

-25

-25

Max. optical path penalty


(dB)

OPTICAL PATH BETWEEN S &


R

NOTE:

When selecting bidirectional transceivers, pay attention that they must operate in
complementary pairs. For example: OTR1-S3BD can work only vis-a-vis OTR1-S5BD;
OTR4-L3BD can work only vis-a-vis OTR4-L5BD, and so on. The transceivers in the following
table are arranged in complementary pairs.
Table 5-2: STM-1 bidirectional transceivers
SFP transceiver name

OTR1-S3BD

OTR1-S5BD

OTR1-L3BD

OTR1-L5BD

OTR1-X49BD

OTR1-X59BD

Application code104

BD 3105

BD 5106

L3BD

L5BD

X49BD

X59BD

Operating wavelength (nm)

1260-1360

1480-1580

1280-1360

1480-1580

1460-1500

1580-1620

Source type

MLM

MLM

MLM

SLM

SLM

SLM

Max. RMS width (nm)

Min. side mode suppression ratio


(dB)

30

30

30

Min. mean launched power (dBm)

-14

-14

-5

-5

-5

-5

Max. mean launched power (dBm)

-8

-8

Min. extinction ratio (dB)

10

10

10

10

10

10

TRANSMITTER

RECEIVER107

104

Application code is in reference to ITU-T Recommendation G.691.

105

BD 3: STM-1 single-fiber bidirectional SFP module with a 1310 nm TX wavelength.

106

BD 5: STM-1 single-fiber bidirectional SFP module with a 1550 nm TX wavelength.

107

Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.

ECI Telecom Ltd. Proprietary

5-7

NPT Product Line System Specifications

NPT-1021 Specifications

SFP transceiver name

OTR1-S3BD

OTR1-S5BD

OTR1-L3BD

OTR1-L5BD

OTR1-X49BD

OTR1-X59BD

Application code104

BD 3105

BD 5106

L3BD

L5BD

X49BD

X59BD

Min. sensitivity (BER of 1 * 10-12)


EOL (dBm)

-32

-32

-32

-32

-34

-34

Min. overload (dBm)

-8

-8

Max. receiver reflectance (dB)

Max. dispersion (ps/nm)

Min. optical return loss of cable (dB)

-20

-20

Max. discrete reflectance (dB)

Max. optical path penalty (dB)

OPTICAL PATH BETWEEN S & R

Parent Topic
5.12 SDH Interfaces

5.13.2 STM-4 (622 Mbps 4.6 ppm)


Table 5-3: STM-4 transceivers
SFP transceiver name

OTR4_S3

OTR4_L3

OTR4_L5

OTR4_V5

OTR4_LC5

S 4.1

L 4.1

L 4.2

V5

LC5

1293-1334

1296-1330

1480-1580

1550

1551

1274-1356

1300-1325

Source type

MLM

MLM

SLM

SLM

CWDM

Max. RMS width (nm)

4/2.5

Max. -20 dB width (nm)

<1

Min. side mode suppression ratio (dB)

30

30

30

30

Min. mean launched power (dBm)

-15

-3

-3

-1

Max. mean launched power (dBm)

-8

+2

+2

Min. extinction ratio (dB)

8.2

10

10

10

10

Application code

108

Operating wavelength (nm)

TRANSMITTER

109

RECEIVER

108

Application code is in reference to ITU-T Recommendation G.691.

109

Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.

ECI Telecom Ltd. Proprietary

5-8

NPT Product Line System Specifications

NPT-1021 Specifications

SFP transceiver name

OTR4_S3

OTR4_L3

OTR4_L5

OTR4_V5

OTR4_LC5

S 4.1

L 4.1

L 4.2

V5

LC5

Min. sensitivity (BER of 1 * 10-12) EOL (dBm)

-28

-28

-28

-34

-29

Min. overload (dBm)

-8

-8

-8

-8

Max. receiver reflectance (dB)

-14

-27

-27

-27

Max. dispersion (ps/nm)

46/74

92/109

1600

2400

1600

Min. optical return loss of cable (dB)

20

24

Max. discrete reflectance (dB)

-25

-27

Max. optical path penalty (dB)

Application code

108

OPTICAL PATH BETWEEN S & R

NOTE:

When selecting bidirectional transceivers, pay attention that they must operate in
complementary pairs. For example: OTR1-S3BD can work only vis-a-vis OTR1-S5BD;
OTR4-L3BD can work only vis-a-vis OTR4-L5BD, and so on. The transceivers in the following
table are arranged in complementary pairs.

NOTE:

OTR16 bidirectional SFPs (in the following table) are multirate transceivers that
support both STM-4 and STM-16.

Table 5-4: STM-4 bidirectional transceivers


SFP transceiver name
Application code

110

OTR4_S3BD OTR4_S5BD OTR4_L3BD OTR4_L5BD OTR16_X49BD OTR16_X59BD


S3BD

S5BD

L3BD

L5BD

X49BD

X59BD

1260-1360

1480-1580

1260-1360

1480-1580

1460-1500

1560-1620

Source type

MLM

SLM

MLM

SLM

SLM

SLM

Max. RMS width (nm)

Min. side mode suppression ratio (dB)

30

30

30

30

Min. mean launched power (dBm)

-15

-15

-3

-3

-2

-2

Max. mean launched power (dBm)

-8

-8

+2

+2

+3

+3

Min. extinction ratio (dB)

8.2

8.2

10

10

8.2

8.2

Operating wavelength (nm)


TRANSMITTER

111

RECEIVER

110

Application code is in reference to ITU-T Recommendation G.691.

111

Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.

ECI Telecom Ltd. Proprietary

5-9

NPT Product Line System Specifications

SFP transceiver name


Application code

110

NPT-1021 Specifications

OTR4_S3BD OTR4_S5BD OTR4_L3BD OTR4_L5BD OTR16_X49BD OTR16_X59BD


S3BD

S5BD

L3BD

L5BD

X49BD

X59BD

Min. sensitivity (BER of 1 * 10-12) EOL


(dBm)

-28

-28

-28

-28

-28

-28

Min. overload (dBm)

-8

-8

-8

-8

-6

-6

Max. receiver reflectance (dB)

-27

-27

OPTICAL PATH BETWEEN S & R


Max. dispersion (ps/nm)
Min. optical return loss of cable (dB)

Max. discrete reflectance (dB)

Max. optical path penalty (dB)

Parent Topic

5.12 SDH Interfaces

5.14 Ethernet Specifications


This section describes the Ethernet specifications for the NPT-1021.

Parent Topic

5 NPT-1021 Specifications

5.14.1 NPT-1021 (Packet Switch without CPS50)


Built-in interfaces

4 x 100/1000Base-X (with optical SFP)


8 x 10/100/1000Base-T

Number of PoE ports

4 x 10/100/1000Base-T

PoE PSE pin-out

IEEE 802.3af, Alternative A

Supported PD type

IEEE 802.3at type 1, type 2

Maximum PoE power per port

30 W

Number of Sync-E ports

12 (all GbE ports)

Supported types of 1588v2 PTP Clock

OC (slave or master)
two-step TC

Switch capacity

10 Gbps

MAC address table capacity

128 K

Supported VLAN quantity

4000 * 4094, as per IEEE 802.1ad

Supported C-VLAN groups

16000

Supported MPLS P2P tunnel queues

8000

Supported Bidirectional LSPs

2048

Maximum number of LSP1:1 Linear Protection Domains 1024


ECI Telecom Ltd. Proprietary

5-10

NPT Product Line System Specifications

NPT-1021 Specifications

Supported MPLS P2MP tunnels

32

Supported maximum PWs

8000

Supported maximum VSIs

4000

Supported maximum policers

4000

Supported maximum policer profiles

128

Sync-E

12 GbE ports

CIR/EIR granularity of policer

64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)

CIR granularity of high CoS Shaper

128K~512Kbps@128Kbps
1~16Mbps@1Mbps
16~64Mbps@2Mbps
64~256Mbps@4Mbps
256~1280Mbps@8Mbps

CIR granularity of low CoS bandwidth

128K~512Kbps@128Kbps
1~16Mbps@1Mbps
16~64Mbps@2Mbps
64~256Mbps@4Mbps
256~1280Mbps@8Mbps

PIR granularity of E-LSP bandwidth

1~No rate limit@1Mb/s

Maximum sites per VPLS instance

255-number of UNI/NNI

Maximum number of UNI/NNI ports per VSI

64

Queues in each egress port

MSTP/ERPS instance number

32

Supported maximum multicast groups per Rooted MP


leaf VSI

1024

Max MTU size

9736 bytes

LAG support

up to 32 LAGs with up to 8 port members per LAG

Supported BFD intervals

3.33 ms, 10 ms, 100 ms, 1000 ms

Maximum number of BFD sessions

600

Maximum number of BFD sessions over Bidirectional


LSP

500

Maximum number of BFD sessions for section

Maximum number of ports

Maximum number of BFD templates

10

Supported CFM intervals

3.33 msec, 10 msec, 100 msec


1 sec,10 sec, 60 sec, 600 sec (slow)

Maximum number of 3.33 msec/10 msec/100


msec/1000 msec CCM sessions

500

Maximum aggregated packet rate for slow CCM (1


sec/10 sec/1 min/10 min)

200 pps

Total number of 3.33 msec BFD and CCM sessions

<=100

ECI Telecom Ltd. Proprietary

5-11

NPT Product Line System Specifications

NPT-1021 Specifications

Total number of 10 msec/100 msec CCM and 10


msec/100 msec/1000 msec BFD sessions

<=500

Standards compliance

IEEE802.1p, IEEE802.1Q, IEEE802.1ad,


IEEE802.1w, IEEE802.1s, IEEE802.1ag
IEEE802.3, IEEE802.3x, IEEE802.3ad, IEEE802.3ah,
IEEE802.3u, IEEE802.3z
RFC3031, RFC3032, RFC3916, RFC3985, RFC4090
RFC5586, RFC5654, RFC5880, RFC5921, RFC6428,
RFC6378, RFC6427
ITU-T Y.1710, Y.1711, Y.1731,
G.707, G.783, G.7041 (GFP), G.7042 (LCAS),
G.8032
MEF9, MEF10, MEF14

Parent Topic

5.13 Ethernet Specifications

5.14.2 DHGE_4E
Interface connector type

4 x RJ45

Supported ports

4 x 10/100/1000Base-Tx with PoE support

PoE PSE pin-out

IEEE 802.3af, Alternative A

Supported PD type

IEEE 802.3at type 1, type 2

Maximum PoE power per port

30 W

Number of Sync-E ports

4 (all ports)

Number of Sync-E Tx clock domains

2 (System clock, PTP slave clock)

Standards compliance

IEEE802.3
ITU-T G.8262

Parent Topic
5.13 Ethernet Specifications

5.14.3 DHGE_8
Interface connector type

4 x SFP

Supported port types

1000Base-SX, LX, EX, ZX


100Base-FX (SM and MM)

Maximum number of 1000Base-X ports

Maximum number of 100Base-FX ports

Maximum number of 10/100/1000Base-T ports

4 (with copper SFP ETGBE)

Number of Sync-E ports

ECI Telecom Ltd. Proprietary

5-12

NPT Product Line System Specifications

NPT-1021 Specifications

Standards compliance

IEEE802.3
ITU-T G.8262

Parent Topic
5.13 Ethernet Specifications

5.14.4 DMCES1_4
Interfaces

4 x channelized STM-1(SFP)
1 x channelized STM-4 (SFP)
1 x GbE SFP

CES service

Unstructured E1 (SAToP)
Channelized E1 (CESoPSN)

Number of CES service

252

Encapsulation Protocol in standalone mode CESoETH, CESoIP/UDP


Encapsulation Protocol in integration mode CESoETH and CESoMPLS
CES clock recovery mechanism

Adaptive Clock Recovery (ACR)


Differential Clock Recovery (DCR)

Reference clock frequency for DCR RTP


timestamp

19.44 MHz
25 MHz

Number of ACR domains

32

Number of DCR domain

252

E1 Tx Timing mode

Recovered from CES stream


System timing
Loop timing

Payload time

125~8000us@125us

Jitter buffer Max delay var

1000-64000 @1000 sec

Jitter buffer Min latency

500-32000 @500 sec

Standards compliance

IEFT RFC4553, RFC5086


MEF8, MEF3
ITU-T Y.1413, G.707, G.783

Parent Topic
5.13 Ethernet Specifications

ECI Telecom Ltd. Proprietary

5-13

NPT Product Line System Specifications

NPT-1021 Specifications

5.14.5 MSE1_16
Interfaces

16 x E1/T1

CES service

Unstructured E1/T1 (SAToP)


Channelized E1/T1 (CESoPSN)

Number of CES service

16

Encapsulation Protocol

CESoETH, CESoMPLS

CES clock recovery mechanism

Adaptive
Differential

Reference clock frequency for DCR


RTP timestamp

19.44 MHz
25 MHz

Adaptive timing domain

16

Differential timing domain

16

Tx Timing mode

Recovered from CES stream


System timing
Loop timing

Payload time

125~8000us@125us

Jitter buffer Max delay var

1000-64000 @1000 sec

Jitter buffer Min latency

500-32000 @500 sec

Standards compliance

IEFT RFC4553, RFC5086


MEF8, MEF3
ITU-T Y.1413, G.703

Parent Topic
5.13 Ethernet Specifications

5.14.6 Ethernet Transceivers


Table 5-5: GbE/FX client transceivers
OTGBE_SX

OTGBE_LX

OTGBE_ZX

GbE/FC1/

GbE/FC1/FICON(2)
long-reach laser,
1310 nm, single
mode

GbE/FC1/FICON(2) GbE/FC1/FICON(2) FX, short-reach


laser, 1310
very long-reach
very long-reach
multimode
laser, 1550 nm,
laser, 1550 nm,
single mode
single mode

FX, short-reach
laser, 1310 nm,
single mode

1.0625/1.25/2.125

1.0625/1.25/2.125

1.0625/1.25/2.125 1.0625/1.25

0.125

0.125

Max.

-3

-3

-15

-8

Min.

-9

-11

-5

-20

-15

Transmitter
type

FICON(2)
short-reach laser,
850 nm,
multimode

Data rate
(nominal)
(Gbps)
Average launch
power (dBm)

ECI Telecom Ltd. Proprietary

OTGBE_EX

OTFE_MM

OTFE_SM

5-14

NPT Product Line System Specifications

NPT-1021 Specifications

OTGBE_SX

OTGBE_LX

OTGBE_ZX

OTGBE_EX

OTFE_MM

OTFE_SM

Min. transmitter
extinction ratio
(dB)

10

8.2

Data format

8B/10B

8B/10B

8B/10B

8B/10B

N/A

N/A

-20

-22

-22

-24

-31

-28

-25.5

--

--

-30

--

Average
receiver
sensitivity
(dBm)

Min.

Typical -21
Max. receiver
overload (dBm)

-14

-8

Typical Rx LOS
level (dBm)

-24

-29

-25

-25

< -33

< -28

Connector

LC

LC

LC

LC

LC

LC

Fiber lengths

550 m

10 km

80 km

40 km

2000 m

10 km

(50/62.5 m
MMF)

(9 m SMF)

(9 m SMF)

(9 m SMF)

(50/62.5 m
MMF)

(9 m SMF)

Table 5-6: GbE bidirectional client transceivers


OTGBE_S3BD

OTGBE_S5BD

OTGBE_L3BD

OTGBE_L5BD

OTGBE_L5BD80

OTGBE_L6BD80

Transmitter type

Bidirectional SFP,
1310 nm

Bidirectional SFP,
1490 nm

Bidirectional SFP,
1310 nm e

Bidirectional SFP,
1490 nm

Bidirectional SFP,
1490 nm

Bidirectional SFP,
1590 nm

Data rate (nominal)


(MBaud)

1250

1250

1250

1250

1250

1250

Average launch
power (dBm)

-3 Max.

-3

+2

+2

+4

+4

-10 Min.

-10

-5

-5

-2

-2

Min. transmitter
extinction ratio (dB)

>9

>9

>9

>9

Data format

8B/10B

8B/10B

8B/10B

8B/10B

8B/10B

8B/10B

Average receiver
sensitivity (dBm)

< -21

< -21

< -23

< -23

-26

-26

Min. overload (dB)

-3

-3

-3

-3

-3

-3

Typical Rx LOS level


(dBm)

< -22

< -22

< -24

< -24

< -26

< -26

Connector

LC

LC

LC

LC

LC

LC

Fiber lengths

10 km

10 km

40 km

40 km

80 km

80 km

(9 m SMF)

(9 m SMF)

(9 m SMF)

(9 m SMF)

(9 m SMF)

(9 m SMF)

Parent Topic
5.13 Ethernet Specifications

ECI Telecom Ltd. Proprietary

5-15

NPT Product Line System Specifications

NPT-1021 Specifications

5.14.7 CWDM and DWDM STM-16/GbE (2488 Mbps 4.6


ppm)
Table 5-7: CWDM and DWDM STM-16/GbE transceivers
CWDM

DWDM

SFP TRANSCEIVER NAME112

OTC25_PSxx

OTC25_1ALxx

OTR25_AVxx

OTR25_ABxx

APPLICATION CODE113

S-C8S1-1D2/5

S-C8L1-1D2/5

G.695

G.695

DW100L\--1D2/5(C)F
DW100C\--1A2/5(C)F

DW100L\--1D2/5(C)F
DW100C\--1A2/5(C)F

G.698.1/.2

G.698.1/.2

1464-1618

1464-1618

1530-1565

1530-1565

Source type

SLM

SLM

SLM

SLM

Max. -20 dB width (nm)

0.4

0.4

Max. RMS width (nm)

Min. side mode suppression (dB)

30

30

30

30

Min. mean launched power (dBm)

Max. mean launched power (dBm)

+5

+5

Min. extinction ratio (dB)

8.2

8.2

8.2

8.2

-21.5

-28

-28

-28

(-23 GbE)

(-32 GbE)

Min. overload (dBm)

-7

-9

-9

Max. receiver reflectance (dB)

-27

-27

-27

-27

800

1600

2400

3600

(40 km G.652)

(80 km G.652)

(120 km G.652)

(180 km G.652)

Min. optical return loss of cable (dB)

24

24

-24

-24

Max. discrete reflectance (dB)

-27

-27

-27

-27

Max. optical path penalty (dB)

1.5

2.5

<3

<2

Operating wavelength (nm)


TRANSMITTER

RECEIVER
Min. sensitivity (BER of 1*10-12) EOL (dBm)

OPTICAL PATH BETWEEN S & R


Max. dispersion [ps/nm]

Parent Topic
5.13 Ethernet Specifications

112

New optical SFP transceivers for existing SIO16 basecard.

113

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

5-16

NPT Product Line System Specifications

NPT-1021 Specifications

5.14.8 Ethernet SFP+ Transceivers


Table 5-8: SFP+ client transceivers
SFP+ TRANSCEIVER NAME

OTP10I_ER

OTP10_ER

OTP10_ZR OTP10_SR

OTP10_LR

OTP10_LRM

OTP10Txx
(Linear version)

APPLICATION CODE114

10GBASE-ER 10GBASE-ER L-64.2a


P1L1-2D2

10GBASE-SR 10GBASE-LR 10GBASE-LRM ALLM (Limiting version) or


ALLN (Linear version)

TRANSMITTER
Operating wavelength (nm)

1530-1565

1530-1565

1530-1565 840-860

1260-1355

1260-1355

C-Band Tunable 1528-1568

Source type

SLM

SLM

SLM

SLM

SLM

SLM

C-Band cooled tunable

Modulation

N/A

N/A

N/A

N/A

N/A

N/A

Spacing (GHz)

NA

NA

NA

NA

NA

NA

Max. -20 dB width (nm)

NA

NA

<1

NA

NA

NA

Min. side mode suppression


(dB)

30

30

30

NA

30

NA

35

Min. mean launched power


(dBm)

-4.7

-4.7

-7.3

-8.2

-6.5

-1

Max. mean launched power


(dBm)

+4

+4

+4

-1

+0.5

+0.5

+3

Min. extinction ratio (dB)

3.5

3.5

Max. attenuation (dB)

11.1

11.1

22

6.2

Min. Attenuation (dB)

11

Min. sensitivity (BER of


1*10-12) EOL (dBm)

-14.1

-14.1

-24

-11

-12.6

-6.5

-22

Min. overload (dBm)

-1

-1

-7

-1

0.5

0.5

-7

Max. receiver reflectance


(dB)

-27

-27

-27

-27

-27

-27

N/A

Max. dispersion [ps/nm]

N/A

N/A

N/A

N/A

N/A

N/A

1600

Min. optical return loss of


cable (dB)

21

21

21

12

12

20

Max. discrete reflectance


(dB)

-26

-26

-27

-12

-12

-12

Max. optical path penalty


(dB)

3.9

3.2

4.7

OCH switching time (ms)

N/A

N/A

N/A

N/A

N/A

N/A

RECEIVER

OPTICAL PATH BETWEEN S


&R

114

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

5-17

NPT Product Line System Specifications

NPT-1021 Specifications

Table 5-9: SFP+ bidirectional client transceivers


SFP+ TRANSCEIVER NAME

OTP10_S27BD

OTP10_S33BD

OTP10_L27BD

OTP10_L33BD

APPLICATION CODE115

10GBASE-S27BD

10GBASE-S33BD

10GBASE-L27BD

10GBASE-L33BD

Source type

CWDM DFB

CWDM DFB

CWDM DFB

CWDM DFB

Modulation

N/A

N/A

N/A

N/A

Operating output wavelength (nm)

1260-1280

1320-1340

1260-1280

1320-1340

Direct max.-20 dB width (nm)

N/A

N/A

N/A

N/A

Min. side mode suppression ratio


(dB)

30

30

30

30

Min. mean launched power (dBm)

-5

-5

Max. mean launched power (dBm)

Min. extinction ratio (dB)

3.5

3.5

3.5

3.5

Maximum attenuation (dB)

19

19

Minimum attenuation (dB)

10

10

Max. dispersion (ps/nm)

N/A

N/A

N/A

N/A

Maximum optical return loss (dB)

12

12

12

12

Maximum discrete reflectance

-12

-12

-12

-12

Maximum DGD (ps)

N/A

N/A

N/A

N/A

Sensitivity (BER of 1*10 12) (dBm)

-14

-14

-18

-18

Min. overload (dBm)

05

0.5

-5

-5

Maximum optical path penalty

3.2

3.2

3.2

3.2

OCH switching time (ms)

N/A

N/A

N/A

N/A

Table 5-10: SFP+ C/DWDM transceivers


SFP+ TRANSCEIVER NAME

OTP10C_PSxx

OTP10D_ALxx

APPLICATION CODE116

PS

AL

Operating wavelength (nm)

1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611

1529.55-1561.61

Source type

CWDM DFB

DWDM EML

Modulation

TRANSMITTER

Spacing (GHz)
Max. -20 dB width (nm)

100
1

115

Application code is in reference to ITU-T Recommendation G.691.

116

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

5-18

NPT Product Line System Specifications

NPT-1021 Specifications

SFP+ TRANSCEIVER NAME

OTP10C_PSxx

OTP10D_ALxx

Min. side mode suppression (dB)

30

30

Min. mean launched power (dBm)

-4.7

-1

Max. mean launched power (dBm)

+4

+3

Min. extinction ratio (dB)

8.2

Max. attenuation (dB)

11.1

22

Min. Attenuation (dB)

10

Min. sensitivity (BER of 1*10-12) EOL (dBm)

-15.8

-23

Min. overload (dBm)

-1

-7

Max. receiver reflectance (dB)

-26

-27

Max. dispersion [ps/nm]

800

1600

Min. optical return loss of cable (dB)

21

27

Max. discrete reflectance (dB)

Max. optical path penalty (dB)

3.5

OCH switching time (ms)

RECEIVER

OPTICAL PATH BETWEEN S & R

Parent Topic

5.13 Ethernet Specifications

5.14.9 CSFP Client Transceivers


Table 5-11: CSFP client transceivers
CSFP TRANSCEIVER

CTGBE_S3S5

CTGBE_S5S3

CTGBE_L3L5

CTGBE_L5L3

CTGBE_E3E5

CTGBE_E5E3

APPLICATION CODE117

S3S5

S5S3

L3L5

L5L3

E3E5

E5E3

Operating wavelength (nm)

1310

1490

1310

1490

1310

1490

Source type

FP

DFB

FP

DFB

DFB

DFB

Max. RMS width (nm)

3.5

3.5

Min. side mode suppression (dB)

30

30

Min. mean launched power (dBm)

-9

-9

-8

-8

-5

-5

Max. mean launched power (dBm)

-3

-3

-2

-2

TRANSMITTER

117

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

5-19

NPT Product Line System Specifications

NPT-1021 Specifications

CSFP TRANSCEIVER

CTGBE_S3S5

CTGBE_S5S3

CTGBE_L3L5

CTGBE_L5L3

CTGBE_E3E5

CTGBE_E5E3

Min. extinction ratio (dB)

-20

-20

-22.5

-22.5

-24

-24

Min. overload (dBm)

-3

-3

-2

-2

Max. receiver reflectance (dB)

Max. dispersion [ps/nm]

Min. optical return loss of cable (dB)

Max. discrete reflectance (dB)

Max. optical path penalty (dB)

RECEIVER
Min. sensitivity (BER of 1*10-12)
EOL (dBm)

OPTICAL PATH BETWEEN S & R

Parent Topic
5.13 Ethernet Specifications

5.14.10 Electrical GbE SFP (ETGbE)


ETGBE

Notes

Data rate

10/100/1000 Mbps

IEEE 802.3 compatible

Connector

RJ-45

Cable type

CAT 5

Cable length

100m

Parent Topic
5.13 Ethernet Specifications

5.15 Optical Amplifier Modules


The OM_BA is an optical booster for the C Band. OM_PA is a preamplifier for the C Band. OM_ILA is an
optical amplifier optimized for in-line sites for links of up to 500 km with up to 80 channels (supports all C
Band channels). The amplifiers are housed in a dedicated Optical Base Card (OBC) that can be installed in
the EXT-2U shelf. For more details regarding the OBC, OM_BA, OM_PA, and OM_ILA refer to the NPT
Reference Manual.

ECI Telecom Ltd. Proprietary

5-20

NPT Product Line System Specifications

NPT-1021 Specifications

Table 5-12: Optical amplifier specifications


Parameter

OM_BA (Single
Channel)

OM_PA (Single
Channel)

OM_ILA
(DWDM)

Input power (dBm)

-7 +4

-35 - -18

-24 - +6

Output power (dBm)

10 - 15

-12

-4 - +16

Spectrum (nm)

1528.8 1564.2

1549.32

1528.8 1564.2

Gain tilt (Ch. 21-36) (dB)

<3

Gain tilt (Ch. 21-60) (dB)

<7

Passband width, < 0.5 dB loss (GHz)

N/A

N/A

N/A

Passband width, < 1.0 dB loss (GHz)

N/A

N/A

N/A

Noise figure (dB)

< 9.8

<6

<8.0+(21-Gain)

Polarization-dependent gain (dB)

< 0.5

< 0.5

< 0.3

Polarization mode dispersion (ps)

< 0.5

< 0.5

< 0.25

Return loss (dB)

> 40

> 40

> 45

Power consumption (Watt)

<8

<8

< 18

Monitor port tap fraction (%)

N/A

N/A

N/A

Automatic Laser Shutdown (ALS)

< 150 ms

< 150 ms

< 150 ms

-2 - 0

Parent Topic

5 NPT-1021 Specifications

5.16 Dispersion Compensation Modules


The OM_DCMxx are dispersion compensation modules used to correct excessive dispersion on long fibers.
The modules are housed in a dedicated Optical Base Card (OBC) that can be installed in the EXT-2U shelf.
For more details regarding the OBC, and OM_DCMxx refer to NPT Reference Manual.

NOTE:

The suffix xx in the module name designates the distance (nominal compensation
length) in km.
The following section provides the OM_DCMxx modules specifications.
Operating wavelength

1549.32 nm

Return Loss:

> 50 dB

Connector

LC

Fiber

G.652

ECI Telecom Ltd. Proprietary

5-21

NPT Product Line System Specifications

NPT-1021 Specifications

Table 5-13: OM_DCMxx specifications


Nominal compensation length

Typical dispersion @ 1549.32 nm [ps/nm]

Max. insertion loss [dB]

40 - 60 km

960

2.65

80 - 100 km

1600

2.65

100 - 120 km

1920

2.65

Parent Topic
5 NPT-1021 Specifications

5.17 MXP10 Base Card Configurations


Card

No. of
ESlots

Function/
Description

MXP10

Base card for multirate combiner, transponder or ADM on Card supporting 12 CSFP
(6 x SFP) ports of GbE, FC1/2/4, STM-1/4/16/64, OTU1. Supports FEC and EFEC on
the line side.

Parent Topic
5 NPT-1021 Specifications

5.17.1 MXP10 Base Card Modules and Transceivers


Card

Function/
Description

Client module and transceivers for MXP10


OM_AOC4

Optical module for up to 4 x SFP based ports , one module per MXP10 card

Line transceivers for MXP10


OTP10C_PSxx

Optical OTU2/OTU2e/STM64/10GE/FC-1200 transceiver, CWDM

OTP10D_ALxx

Optical OTU2/OTU2e/STM64/10GE/FC-1200 transceiver, DWDM

OTP10T_AL

Tunable SFP+

OTPMR10

Multi-rate SFP+ for OTU2/OTU2e/STM64/10GE/FC-800/FC-1200

Client SFP transceivers for MXP10


OTGBE_SX

Optical GbE/FC/FICON transceiver, short reach, 850 nm multimode fiber

OTGBE_LX

Optical GbE/FC/FICON transceiver, long reach, 1310 nm single mode fiber

OTGBE_ZX

Optical GbE/FC/FICON transceiver, very long reach, 1550 nm single mode fiber

OTGBE_S3BD

Bi-directional GbE SFP with 1310nm TX/1490nm Rx. Short Range (10km)

ECI Telecom Ltd. Proprietary

5-22

NPT Product Line System Specifications

NPT-1021 Specifications

Card

Function/
Description

OTGBE_S5BD

Bi-directional GbE SFP with 1490nm TX/1310nm Rx. Short Range (10km)

OTR16_I3

STM-16/OC-48 transceiver, intra-office 1310 nm

OTR16_S3

STM-16/OC-48 transceiver, short-haul 1310 nm

OTR16_L3

STM-16/OC-48 transceiver, long-haul 1310 nm

OTR16_L5

STM-16/OC-48 transceiver, long-haul 1550 nm

OTC25_PSxx

2.7 Gbps CWDM transceiver (with or without outband FEC), short haul with PIN receiver

OTC25_ALxx

2.7 Gbps CWDM transceiver (with or without outband FEC), long haul with APD receiver

OTR25_AVxx

DWDM SFP: 2.5/2.7G transceiver 2400 ps/nm, channel xx, LC connectors

OTR25_ABxx

DWDM SFP: 2.5/2.7G transceiver 3240 ps/nm, channel xx, LC connectors

Parent Topic
5.16 MXP10 Base Card Configurations

5.18 EM_10E Specifications


Interfaces

FXO, FXS, 2W, 4W, 6W, E&M, V.11


V.24, V.35, V.36, Codir 64 Kbps, Omni 64Kbit/s,
C37.94, RS-422, RS-449

DS-0 cross-connect capacity

682

Number of CES E1 uplinks

16

CES service

Unstructured E1 (SAToP)
Channelized E1 (CESoPSN)

Number of CES service

16

Encapsulation Protocol

CESoETH, CESoMPLS

CES clock recovery mechanism

Adaptive
Differential

Reference clock frequency for DCR


RTP timestamp

19.44 MHz
25 MHz

Tx Timing mode

Recovered from CES stream


System timing
Loop timing

Payload time

125~8000us@125us

Jitter buffer Max delay var

1000-64000 @1000 sec

Jitter buffer Min latency

500-32000 @500 sec

ECI Telecom Ltd. Proprietary

5-23

NPT Product Line System Specifications

Standards compliance

NPT-1021 Specifications

G.703, G.704, G.732, G.735, G.736, G.796, IEEE C37.94


V.11, V.24, V.28, V.110, V.14
IETF RFC4553, RFC5086
MEF8, MEF3
ITU-T Y.1413, G.703

Parent Topic
5 NPT-1021 Specifications

5.18.1 EM_10E Total Capacity


22 x E1 capacity

16 x E1 to the 1/0 XC + 6 x E1 directly to the modules

Parent Topic
5.17 EM_10E Specifications

5.18.2 EM_10E DXC1/0 XC Capacity


DS0 XC Matrix

682 x DS-0 bidirectional


(16 x CES E1 + 6 x E1 from modules)

E1 XC Matrix

16 x CES E1 + 16 x E1 from DS0 XC Matrix + 12 x E1 directly to the modules

Functionality

64 Kbps timeslot interchange between modules and CES E1

CAS XC

CAS configuration in accordance


with corresponding voice channels

Parent Topic
5.17 EM_10E Specifications

5.18.3 Timing
Any of the following clock sources can be selected as a timing reference:

Any Dslot (SM_CODIR_4E, SM_V35_V11)

Internal clock source

SDH distributed timing

Two of 32 possible clocks derived from the cards E1 mappers and framers (SM_10E only)

Two of 16 possible clocks recovered from CES E1 (EM_10E only)

Parent Topic
5.17 EM_10E Specifications

ECI Telecom Ltd. Proprietary

5-24

NPT Product Line System Specifications

NPT-1021 Specifications

5.18.4 FXO/FXS Interface


Maximum number of channels 8 (per module)
Impedance

600 W balanced

ITU-T standards compliance

G.711 and G.712

PCM Coding

A-Law

Additional specifications are shown in the following table.


Table 5-14: FXO and FXS specifications
Characteristic
Main characteristic

FXO

FXS

< 100 mA

25 mA

Subcharacteristic

DC current loop
Line loop DC resistor
Return loss 300-3,400 Hz

Total harmonic distortion


D A and A D

Unbalance relative to ground


Idle channel noise
Hook detection time
Gain
Digital pulse supported width
Transmission distance

< 2000
300-500 Hz

> 14 dB

> 14 dB

500-2,000 Hz

> 18 dB

> 18 dB

2,000-3,400 Hz

> 14 dB

> 14 dB

-45 dBm0

> 24 dB

> 24 dB

-40 dBm0

> 29 dB

> 29 dB

-30 dBm0

> 35 dB

> 35 dB

-20 dBm0

> 35 dB

> 35 dB

-10 dBm0

> 35 dB

> 35 dB

0 dBm0

> 35 dB

> 35 dB

300-600 Hz

> 40 dB

> 40 dB

600-3,400 Hz

> 46 dB

> 46 dB

AD

< -65 dB

< -65 dB

DA

< -67 dB

< -67 dB

Minimum

2 msec

2 msec

Maximum

Unlimited

Unlimited

Rx

-3.5 dB

-3.5 dB

Tx

0 dB

0 dB

Sample rate

500 Hz

Minimum width

2 msec

0.4 mm cables

~ 4 km

0.5 mm cables

~ 6 km

Parent Topic

5.17 EM_10E Specifications

ECI Telecom Ltd. Proprietary

5-25

NPT Product Line System Specifications

NPT-1021 Specifications

5.18.5 Ringer Characteristics


Total power

10 W

Maximum load

12 REN

Voltage

75 V RMS

Frequency

25 Hz

Parent Topic

5.17 EM_10E Specifications

5.18.6 2 Wire/4 Wire/6 Wire and E&M Interface


Maximum number of channels

6 (per module)

Impedance

600 ohm balanced

Signaling type

Types V

Far end Cross Talk (2W&4W)

-65 dB

Go-To-Return Cross Talk (4W)

-60 dB

Signaling Impedance

> 15 K ohm

Signaling Sensitivity

> 2.5 mA

Return Loss - 2W

300Hz600Hz >12dB, 600Hz3400Hz >15dB

Return Loss - 4W

300Hz3400Hz >20dB

Tx levels

4W: -11 dBm ~ +1 dBm (software-configurable with 1 dB granularity)


2W: 0 dBr 1 dB

Rx levels

4W: -11 dBm ~ -1 dBm (software-configurable with 1 dB granularity)


2W: -3.5 dBr 1 dB

ITU-T standards compliance

G.711 and G.712

Parent Topic
5.17 EM_10E Specifications

5.18.7 Codir_4E Interface


Maximum number of channels

4 (per module)

Impedance

120 ohm balanced

Standard Compliance

G.703-64 Kbps co-directional interface

Parent Topic
5.17 EM_10E Specifications

ECI Telecom Ltd. Proprietary

5-26

NPT Product Line System Specifications

NPT-1021 Specifications

5.18.8 OMNI_E Interface


Maximum number of 2W/4W channels

4 (per module)

Maximum number of conference groups

Maximum number of members in each conference


group

60

Parent Topic
5.17 EM_10E Specifications

5.18.9 V.24 Interface


Maximum number of
channels

8 in Transparent mode
4 in Asynchronous mode
2 in Synchronous mode

Bit rate

50 bps-19.2 Kbps in Transparent mode 0.6 Kbps, 1.2 Kbps, 2.4 Kbps,
4.8 Kbps, 9.6Kbps, 19.2 Kbps, 38.4Kbps,
57.6 Kbps (HCM) in Asynchronous mode
0.6 Kbps, 1.2 Kbps, 2.4 Kbps, 4.8 Kbps, 9.6Kbps, 19.2 Kbps, 38.4 Kbps,
57.6Kbps in HCM mode, 64 Kbps, in Synchronous mode

Modes of operation

Transparent, Asynchronous, Synchronous

Standards compliance

ITU-T V28, ITU-T V110, ITU-T V14

Parent Topic
5.17 EM_10E Specifications

5.18.10 V.35 Interface


Maximum number of channels 2 (per module)
Bit rate

N x 64 K (N = 131)
2Mb/s (Unframed)

Standards compliance

ITU-T V.28, ITU-T V.35

Parent Topic
5.17 EM_10E Specifications

5.18.11 V.36 Interface


Maximum number of channels

2 (per module)

Bit rate

N x 64 K (N = 131)
2Mb/s (Unframed)

Standards compliance

ITU-T V.11, V.10, V.36

ECI Telecom Ltd. Proprietary

5-27

NPT Product Line System Specifications

NPT-1021 Specifications

Parent Topic
5.17 EM_10E Specifications

5.18.12 RS-422/449 Interface


Maximum number of channels 2 (per module)
Protocol

X.24, X.21

Bit rate

N x 64 K (N = 131)
2Mb/s (Unframed)

Standards compliance

EIA-449, TIA-422-B

Parent Topic
5.17 EM_10E Specifications

5.18.13 SM_C37.94 Interface


Maximum number of channels

2 (per module)

Supported protocol

IEEE C37.94

Bandwidth

N x 64 Kbps, N=1 to 12

Optical interface wavelength

840 to 860 m

Supported fibers

50/62.5 m MMF

Optical interface rate

2048 Kbps

Tx and Rx fiber optic heads

850 nm multimode LED

Connectors type

BFOC/2.5 (ST)

Parent Topic
5.17 EM_10E Specifications

5.18.13.1 C37.94 Transceiver Specifications


Transmit optical power

-11~-23 dBm (50 m MMF), -11~-19 dBm (62.5 m MMF)

Receiver sensitivity

-11~-32 dBm

Parent Topic
5.17.13 SM_C37.94 Interface

5.18.14 SM_C37.94S Specifications


This section describes the specifications for SM_C37.94S

ECI Telecom Ltd. Proprietary

5-28

NPT Product Line System Specifications

NPT-1021 Specifications

Parent Topic
5.17 EM_10E Specifications

5.18.14.1 General
Maximum number of channels per
module

Maximum number of channels per


card

Maximum number of channels per


shelf

18

Power consumption

3W

Parent Topic
5.17.14 SM_C37.94S Specifications

5.18.14.2 C37.94S Interface


Supported protocol

IEEE C37.94

Bandwidth

N x 64 Kbps, N=1 to 12

Optical interface wavelength

760 to 860 nm

Fiber types

50/125 m MMF Multimode

Optical interface rate

2048 Kbps

Connectors type

LC (SFP based)

Parent Topic
5.17.14 SM_C37.94S Specifications

5.18.14.3 C37.94S SFP Based Transceiver Specifications


Transceiver form

SFP

Transmit optical power

-11~-23 dBm (50 m MMF), -11~-19 dBm (62.5 m MMF)

Receiver sensitivity

-11~ -32 dBm

Parent Topic
5.17.14 SM_C37.94S Specifications

5.19 Physical Specifications


This section describes the physical specifications of the product.

ECI Telecom Ltd. Proprietary

5-29

NPT Product Line System Specifications

NPT-1021 Specifications

Parent Topic
5 NPT-1021 Specifications

5.19.1 Dimensions (H x W x D)
NPT-1020/NPT-1021 shelf 44.4 mm x 440 mm x 243 mm
INF-B1U

20 mm x 76 mm x 222 mm

INF-B1U-D

40 mm x 76 mm x 222 mm

AC_PS-B1U

40 mm x 76 mm x 222 mm

EXT-2U shelf

88.9 mm x 443.4 mm x 243 mm

EXT-2U shelf traffic card

26 mm x 283 mm x 222 mm

INF-E2U

26 mm x 111 mm x 222 mm

AC_PS-E2U

52 mm x 111 mm x 222 mm

FCU-E2U

85 mm x 40 mm x 222 mm

Racks

2200/2600 mm x 600 mm x 300 mm

Parent Topic
5.18 Physical Specifications

5.19.2 Weight
NPT-1020/NPT-1021 fully populated

4.5 kg

EXT-2U fully populated

7.5 kg

Parent Topic
5.18 Physical Specifications

5.19.3 Power
Applicable specification

ETSI 300 132-2

Input DC voltage

-40 VDC to -72 VDC

Nominal DC power source

-48 VDC

Input AC voltage

110 VAC to 230 VAC; 50 Hz/60 Hz

Nominal AC power source

220 VAC or 110 VAC

NPT-1020/NPT-1021 power
consumption

Maximum 200 W

EXT-2U power consumption

Maximum 511 W (Including PoE)

Parent Topic
5.18 Physical Specifications
ECI Telecom Ltd. Proprietary

5-30

NPT Product Line System Specifications

NPT-1021 Specifications

5.19.4 AC_PS-B1U Module


AC input voltage range

110 VAC to 230 VAC; 50 Hz/60 Hz

DC output voltage

-48 VDC to -70 VDC

Maximum output load power


(220VAC)

180 W

Maximum output load power


(110VAC)

130 W

Working temperature

-5 C to +55 C

Storage temperature range

-40 C to +70 C

Parent Topic
5.18 Physical Specifications

5.19.5 AC_PS-E2U
AC input voltage range

100 VAC to 240 VAC; 50 Hz/60 Hz

DC output voltage

-48 VDC to -70 VDC

Maximum output load power

200 W

Working temperature

-5 C to +55 C

Storage temperature range

-40 C to +70 C

Parent Topic
5.18 Physical Specifications

5.19.6 INF-B1U Module


DC input voltage

-48 VDC to -70 VDC

Maximum output load power

241 W

Working temperature

-25 C to +70 C

Storage temperature range

-40 C to +70 C

Parent Topic
5.18 Physical Specifications

5.19.7 NPT-1021 Power Consumption


Type

Component name

Commons

NPT-1021 shelf with fans

60.5 W

CPS50

48.2 W

INF-B1U

8.7 W

ECI Telecom Ltd. Proprietary

Power requirements

5-31

NPT Product Line System Specifications

Type
Tslot modules

Component name

10 W

DHGE_4E

11.8 W

DHGE_8

17.8 W
12.9 W

EXT-2U shelf with fans

18.7 W

INF_E2U

15 W

FCU_E2U

18.7 W

EM_10E base card

EM_10E modules

SFP transceivers

ECI Telecom Ltd. Proprietary

25 W

MSE1_16

Optical base card (OBC)

OBC modules

Power requirements

INF-B1U-D

DMCES1_4
Expansion unit

NPT-1021 Specifications

8W
13.1 W

DHFE_12

12 W

DHFX_12

20.5 W

MXP10

38.2 W

OM_AOC4

5W

OM_BA

11 W

OM_PA

10 W

OM_ILA

18 W

SM_FXS_8E

1 W (all idle)
10 W (all busy)

SM_FXO_8E

1 W (all idle)
2.5 W (all busy)

SM_EM_24W_6E

1 W (all idle)
2.8 W (all busy)

SM_V24E

0.8 W (all idle)


3.2 W (all busy)

SM_V35E

0.8 W (all idle)


1.9 W (all busy)

SM_V35_V11

1.5 W (2 x V.35)
3.5 W (2 x V.11)

SM_CODIR_4E

0.8 W (all idle)


1.8 W (all busy)

SM_OMNI_E

1.5 W

SM_C37.94

3W

SM_C37.94S

3W

OTR1_YY

1W

OTR4_YY

1W
5-32

NPT Product Line System Specifications

Type

Component name

SFP+

NPT-1021 Specifications

Power requirements

OTR16_YY

1W

OTR25_xx

1.5 W

OTC25_ALxx

1.6 W

OTC25_PSxx

1.6 W

OTFE_SM

1W

OTFE_MM

1W

OTGBE_SX

1W

OTGBE_LX

1W

OTGBE_ZX

1W

ETGBE

1W

OTP10_SR

0.9 W

OTP10_LR

0.9 W

OTP10_ZR

1.5 W

OTP10_LRM

1W

OTP10C_xx

1.5 W

OTP10D_xx

1.5 W

OTP10_xxBD

1.5 W

OTP10T_AL

1.5 W

OTP10T_17

1.7 W

Parent Topic

5.18 Physical Specifications

5.19.8 Environmental Conditions


This section describes the environmental conditions required for the operation, storage, handling and
transportation of the product

NOTE:

Extended temperature range of -25 C to +70 C is supported. However, before


installing the NPT-1021 in a street cabinet, consult the PLM at ECI.

Parent Topic
5.18 Physical Specifications

ECI Telecom Ltd. Proprietary

5-33

NPT Product Line System Specifications

NPT-1021 Specifications

5.19.8.1 Operation
Applicable specification

ETSI-300-019-2-3 Class 3.3

Temperature range

-25C to +70C

Relative humidity

5% to 95%

Parent Topic
5.18.8 Environmental Conditions

5.19.8.2 Storage (Packed)


Applicable specification

ETS-300-019-2-1 Class 1.2

Temperature range

-40C to +70C

Relative humidity

10% to 100%

Parent Topic
5.18.8 Environmental Conditions

5.19.8.3 Handling and Transportation


Applicable specification

ETS-300-019-2-2 Class 2.2

Temperature range

-40C to +70C

Relative humidity

up to 95%

Parent Topic
5.18.8 Environmental Conditions

5.19.9 EMC
Applicable specifications

EN 300 386/2000

Applicable directive

EMC directive 89/336 EEC

Parent Topic
5.18 Physical Specifications

5.19.10 Safety
Applicable specifications

EN 60950/2000

Applicable CE directive

LVD directive 73/23/EEC

Parent Topic

5.18 Physical Specifications


ECI Telecom Ltd. Proprietary

5-34

NPT Product Line System Specifications

NPT-1021 Specifications

5.19.11 Laser Safety


Applicable specification

IEC 60825-1&2 (AS/NZS 2211.2)

Parent Topic

5.18 Physical Specifications

5.19.12 Reliability
This section describes the reliability of the NPT-1010 platform with respect to product life and availability.

Parent Topic
5.18 Physical Specifications

5.19.12.1 Life
Expected lifetime of the NPT-1021

15 years

Parent Topic

5.18.12 Reliability

5.19.12.2 Availability
Availability of service for an end-to-end service
trail passing through a protected SDH network

better than 99.999%

Parent Topic

5.18.12 Reliability

ECI Telecom Ltd. Proprietary

5-35

NPT-1020 Specifications

6.1

NPT-1020 Shelf Capacity

The NPT-1020 is designed around a centralized hybrid matrix card that supports any to any direct data card
connectivity as well as native TDM switching capacity. The NPT-1020 offers a packet switching capacity of
up to 10 Gbps or 50 Gbps (with a choice of two modes on the same unit) as well as a TDM capacity of up to
2.5 Gbps (16 x VC-4) fully low order traffic.

Parent Topic
6 NPT-1020 Specifications

6.2

Cross-Connect Specifications

This section describes the cross-connect specifications for NPT-1020.

Parent Topic
6 NPT-1020 Specifications

6.2.1 Cross-Connect Levels


Cross-connect levels

VC-4-4c, VC-4, VC-3, VC-12

Parent Topic
6.2 Cross-Connect Specifications

6.2.2 Cross-Connect Capacity


ADM-1/4 cross-connect capacity

16 x STM-1 with cross-connect capability of 4/3/1

Parent Topic
6.2 Cross-Connect Specifications

6.3

Switching Specifications

Switching capacity

10 Gbps

MPLS processing (IMIX)

10 Gbps

Switching capacity with CPS50

60 Gbps

MPLS processing with CPS50 (IMIX)

60 Gbps

Parent Topic
6 NPT-1020 Specifications
ECI Telecom Ltd. Proprietary

6-1

NPT Product Line System Specifications

6.4

NPT-1020 Specifications

Redundancy

DC power system

INF-B1U/INF-E2U 1+1 redundancy

Parent Topic
6 NPT-1020 Specifications

6.5

Synchronization

There are five types of timing references available from SDH/PDH multiple timing sources:

From any 2.048 Mbps/2.048 Mhz/E1 PDH tributary interface

From any SDH line

From any GbE port that supports synchronous Ethernet

An external input/output of 2.048 MHz or 2.048 Mbps

G.813 internal clock, free-run, accuracy of 4.6 ppm

1588v2 PTP Ordinary Clock

Synchronization Status Message (SSM) support is provided

Parent Topic
6 NPT-1020 Specifications

6.6

IEEE 1588v2 Specification

Supported types of 1588v2 Ordinary clock (master or slave)


PTP Clock
Two-step E2E Transparent Clock (TC)
Grandmaster work mode

Unicast, two-step

Maximal aggregated
unicast packet rate of OC
master

2000 pps

Max number of slave clocks 64118


supported per master
Synchronization source of
master

1PPS/ToD
System clock (T0 of SEC/EEC TMU)
Any Sync-E port of central PE
Local OCXO

Synchronization transport

Frequency
Phase (with 1PPS) and time (with ToD)

118

Depends on the network conditions and PTP protocol configuration, and limited by 2000 pps budget.

ECI Telecom Ltd. Proprietary

6-2

NPT Product Line System Specifications

NPT-1020 Specifications

Type of PTP clock interface 1 x 1PPS


1 x ToD
Connector type of 1PPS
and ToD interface

RJ-45

Electrical characteristic of
1PPS and ToD interface

RS-422/V.11

PTP message encapsulation UDP/IPv4


ToD message format

GPRMC

Standards compliance

IEEE 1588v2

Parent Topic
6 NPT-1020 Specifications

6.7

Throughput Test - RFC2544

Number of RFC2544 test port

Max test rate

200Mbps

Test rate granularity

64Kbps~960Kbps@64Kbps, 1Mbps~Max rate@100Kbps

Transmit frame size

Fixed (64~1522B)
IMIX

IMIX types

Standard IMIX
G.8261 IMIX1
G.8261 IMIX2
User defined IMIX

Performance test

Frame loss (Latency and jitter test is not supported)

6.8

Acoustic Noise

Acoustic noise

53 dBA

Parent Topic
6 NPT-1020 Specifications

6.9

Traffic Protection

Applicable specifications

ITU-T G.841, G.842

SNCP I/N HO

within 10 ms

SNCP I/N LO

within 10 ms

MSP 1+1

within 30 ms

ERPS

within 50 ms

ECI Telecom Ltd. Proprietary

6-3

NPT Product Line System Specifications

NPT-1020 Specifications

1:1 linear protection

within 50 ms

Dual FRR (Fast ReRoute)/FRR

within 50 ms

LAG 1:1

within 50ms (static)


within 100ms (LACP)

PW redundancy

within 50 ms

Parent Topic
6 NPT-1020 Specifications

6.10 Jitter and Wander


Applicable specifications ITU T G.823, G.825

Parent Topic
6 NPT-1020 Specifications

6.11 I/O Interfaces


This section describes the specifications for the I/O interfaces.

Parent Topic

6 NPT-1020 Specifications

6.11.1 2.048 Mbps (E1)


Physical level

G.703, Paragraph 6/s 50ppm

Frame options

Unframed, framed (ITU-T G.704)

Line code

HDB3

Line impedance

120 balanced 5%

Parent Topic

6.10 I/O Interfaces

6.11.2 1.544 Mbps (T1)


Physical level

ANSI T1.403-1999

Frame options

Unframed, framed (ANSI T1.107-2002 [R2006])

Line code

AMI/B8ZS

Line impedance

100 balanced

Parent Topic

6.10 I/O Interfaces

ECI Telecom Ltd. Proprietary

6-4

NPT Product Line System Specifications

NPT-1020 Specifications

6.11.3 34 Mbps (E3)


Physical level

G.703, Paragraph 8

Frame

Unframed

Line code

HDB3

Line impedance

75 W unbalanced

Parent Topic

6.10 I/O Interfaces

6.11.4 45 Mbps (DS3)


Physical level

G.703, Paragraph 5

Frame

Unframed

Line code

B3ZS

Line impedance

75 W unbalanced

Parent Topic
6.10 I/O Interfaces

6.11.5 STM-1 Electrical


Physical level

G.703, Paragraph 12

Bitrate

155.52 Mbps 20 ppm

Frame

G.707

Line code

CMI

Parent Topic
6.10 I/O Interfaces

6.11.6 STM-1 Optical


Physical level

G.957, Table 2

Wavelength

1310 nm, 1550 nm

Bitrate

155.52 Mbps 4.6 ppm

Transmission range

S3, L3, L5, X3, X5, VL5

Parent Topic
6.10 I/O Interfaces

ECI Telecom Ltd. Proprietary

6-5

NPT Product Line System Specifications

NPT-1020 Specifications

6.11.7 STM-4 Optical


Physical level

G.957, Table 3

Wavelength

1310 nm, 1550 nm

Bitrate

622 Mbps 4.6 ppm

Transmission range

S3, L3, L5, V5

Parent Topic
6.10 I/O Interfaces

6.12 Management
Applicable specifications

G.784, G.774, M.3010, M.3100

LightSoft (ECI Telecom Network


Manager) server and client for
managing all ECI Telecom
equipment

on SUN workstation(s)

EMS-APT (element manager)

on PC or SUN workstation(s)

LCT-APT (local craft terminal)

on PC

Parent Topic
6 NPT-1020 Specifications

6.12.1 Management and Alarm Interfaces


CMIP-like over TCP/IP to EMS-APT
SNMP V3 to third-party SNMP-based management solution (monitoring only)
MTNM from EMS-APT to LightSoft or other TMN
10/100BaseT to LCT-APT
OverHead Access (OHA)
Orderwire
Rack Alarm Panel

Parent Topic
6.11 Management

6.12.2 Management Communication Channel


MCC Interfaces

ECI Telecom Ltd. Proprietary

Management LAN interface for DCN


RS-DCC , MS-DCC, E1 clear channel for SDH network
In-band MCC for Ethernet/MPLS network
GCC for OTN network

6-6

NPT Product Line System Specifications

IP & Routing protocol

IPv4
OSPFv2

Interface types

Numbered, unnumbered

Link Layer
Encapsulation

IEEE 802.3 Ethernet For management port or in-band MCC


LAN emulation over HDLC For DCC
PPP over HDLC For DCC or GCC
IEEE 802.1q For in-band MCC
IEEE 802.1ad For in-band MCC

DCC processing
capacity

4 Mbps

Maximum number of
DCC channels

8 x RS-DCC (192 Kbps), 8 x MS-DCC (576 Kbps)

NPT-1020 Specifications

In-band MCC interfaces MCC over MoE (IP over Ethernet)


MCC over single PB port
Management VLAN
In-band MCC
processing capacity

10 Mbps

Maximum number of
MCC channels

12

MCC bandwidth per


interface

256 Kbps~4 Mbps@ 256Kbps

Maximum number of
GCC channels

6 (only MXP10 OTU2/OTU2e ports support GCC)

GCC termination type

GCC0, GCC1, GCC2

Clear channels

2 x E1 clear channel
Framed or unframed

Parent Topic
6.11 Management

6.12.3 Alarms and Performance


Performance concept

ITU-T G.821, G.826, Bellcore GR-820-CORE

Alarm concept

G.783

Alarm types

LED indicators, dry contacts,


(per subrack), external alarm inputs and outputs

Alarm classes

Critical, Major, Minor, Warning

Parent Topic
6.11 Management

ECI Telecom Ltd. Proprietary

6-7

NPT Product Line System Specifications

NPT-1020 Specifications

6.13 SDH Interfaces


This section describes the specifications for the SDH interfaces.

Parent Topic
6 NPT-1020 Specifications

6.13.1 STM-1 (155.52 Mbps 4.6 ppm)


Table 6-1: STM-1 interface
SFP transceiver name

OTR1_S3

OTR1_L3

OTR1_L5

OTR1_X3

OTR1_X5

OTR1_VL5

OTR1_VLC5

Application code119

S-1.1

L-1.1

L-1.2

Operating wavelength (nm)

1261-1360

1263-1360

1480-1580

1270-1360

1500-1520

1500-1520

1544.5-1557.5

Source type

MLM

SLM

SLM

SLM

SLM

SLM

SLM

Max. RMS width (nm)

7.7

Min. side mode suppression


ratio (dB)

30

30

30

> 30

> 30

30

Min. mean launched power


(dBm)

-15

-5

-5

+5

Max. mean launched power


(dBm)

-8

+5

+5

Min. extinction ratio (dB)

8.2

10

10

10

10

10

10

-28

-34

-34

-37

-35

-42

-42

Min. overload (dBm)

-8

-10

-10

-8

-8

-5

-7

Max. receiver reflectance


(dB)

-25

Max. dispersion (ps/nm)

96

Min. optical return loss of


cable (dB)

-20

-20

Max. discrete reflectance (dB -

-25

-25

-25

Max. optical path penalty


(dB)

TRANSMITTER

RECEIVER120
Min. sensitivity (BER of
-12

1 * 10 ) EOL (dBm)

OPTICAL PATH BETWEEN S &


R

119

Application code is in reference to ITU-T Recommendation G.691.

120

Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.

ECI Telecom Ltd. Proprietary

6-8

NPT Product Line System Specifications

NPT-1020 Specifications

NOTE:

When selecting bidirectional transceivers, pay attention that they must operate in
complementary pairs. For example: OTR1-S3BD can work only vis-a-vis OTR1-S5BD;
OTR4-L3BD can work only vis-a-vis OTR4-L5BD, and so on. The transceivers in the following
table are arranged in complementary pairs.
Table 6-2: STM-1 bidirectional transceivers
SFP transceiver name

OTR1-S3BD

OTR1-S5BD

OTR1-L3BD

OTR1-L5BD

OTR1-X49BD

OTR1-X59BD

Application code121

BD 3122

BD 5123

L3BD

L5BD

X49BD

X59BD

Operating wavelength (nm)

1260-1360

1480-1580

1280-1360

1480-1580

1460-1500

1580-1620

Source type

MLM

MLM

MLM

SLM

SLM

SLM

Max. RMS width (nm)

Min. side mode suppression ratio


(dB)

30

30

30

Min. mean launched power (dBm)

-14

-14

-5

-5

-5

-5

Max. mean launched power (dBm)

-8

-8

Min. extinction ratio (dB)

10

10

10

10

10

10

Min. sensitivity (BER of 1 * 10-12)


EOL (dBm)

-32

-32

-32

-32

-34

-34

Min. overload (dBm)

-8

-8

Max. receiver reflectance (dB)

Max. dispersion (ps/nm)

Min. optical return loss of cable (dB)

-20

-20

Max. discrete reflectance (dB)

Max. optical path penalty (dB)

TRANSMITTER

RECEIVER124

OPTICAL PATH BETWEEN S & R

Parent Topic
6.12 SDH Interfaces

121

Application code is in reference to ITU-T Recommendation G.691.

122

BD 3: STM-1 single-fiber bidirectional SFP module with a 1310 nm TX wavelength.

123

BD 5: STM-1 single-fiber bidirectional SFP module with a 1550 nm TX wavelength.

124

Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.

ECI Telecom Ltd. Proprietary

6-9

NPT Product Line System Specifications

NPT-1020 Specifications

6.13.2 STM-4 (622 Mbps 4.6 ppm)


Table 6-3: STM-4 transceivers
SFP transceiver name

OTR4_S3

OTR4_L3

OTR4_L5

OTR4_V5

OTR4_LC5

S 4.1

L 4.1

L 4.2

V5

LC5

1293-1334

1296-1330

1480-1580

1550

1551

1274-1356

1300-1325

Source type

MLM

MLM

SLM

SLM

CWDM

Max. RMS width (nm)

4/2.5

Max. -20 dB width (nm)

<1

Min. side mode suppression ratio (dB)

30

30

30

30

Min. mean launched power (dBm)

-15

-3

-3

-1

Max. mean launched power (dBm)

-8

+2

+2

Min. extinction ratio (dB)

8.2

10

10

10

10

Min. sensitivity (BER of 1 * 10-12) EOL (dBm)

-28

-28

-28

-34

-29

Min. overload (dBm)

-8

-8

-8

-8

Max. receiver reflectance (dB)

-14

-27

-27

-27

Max. dispersion (ps/nm)

46/74

92/109

1600

2400

1600

Min. optical return loss of cable (dB)

20

24

Max. discrete reflectance (dB)

-25

-27

Max. optical path penalty (dB)

Application code

125

Operating wavelength (nm)

TRANSMITTER

126

RECEIVER

OPTICAL PATH BETWEEN S & R

NOTE:

When selecting bidirectional transceivers, pay attention that they must operate in
complementary pairs. For example: OTR1-S3BD can work only vis-a-vis OTR1-S5BD;
OTR4-L3BD can work only vis-a-vis OTR4-L5BD, and so on. The transceivers in the following
table are arranged in complementary pairs.

125

Application code is in reference to ITU-T Recommendation G.691.

126

Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.

ECI Telecom Ltd. Proprietary

6-10

NPT Product Line System Specifications

NPT-1020 Specifications

NOTE:

OTR16 bidirectional SFPs (in the following table) are multirate transceivers that
support both STM-4 and STM-16.

Table 6-4: STM-4 bidirectional transceivers


SFP transceiver name

OTR4_S3BD

OTR4_S5BD

OTR4_L3BD

OTR4_L5BD

OTR16_X49B
D

OTR16_X59B
D

S3BD

S5BD

L3BD

L5BD

X49BD

X59BD

1260-1360

1480-1580

1260-1360

1480-1580

1460-1500

1560-1620

Source type

MLM

SLM

MLM

SLM

SLM

SLM

Max. RMS width (nm)

Min. side mode suppression


ratio (dB)

30

30

30

30

Min. mean launched power


(dBm)

-15

-15

-3

-3

-2

-2

Max. mean launched power


(dBm)

-8

-8

+2

+2

+3

+3

Min. extinction ratio (dB)

8.2

8.2

10

10

8.2

8.2

Min. sensitivity (BER of 1 *


10-12) EOL (dBm)

-28

-28

-28

-28

-28

-28

Min. overload (dBm)

-8

-8

-8

-8

-6

-6

Max. receiver reflectance (dB)

-27

-27

Max. dispersion (ps/nm)

Min. optical return loss of cable (dB)

Max. discrete reflectance (dB)

Max. optical path penalty (dB)

Application code

127

Operating wavelength (nm)


TRANSMITTER

128

RECEIVER

OPTICAL PATH BETWEEN S & R

Parent Topic
6.12 SDH Interfaces

127

Application code is in reference to ITU-T Recommendation G.691.

128

Receiver units of SFPs (excluding bidirectional SFPs) are a wide-band type.

ECI Telecom Ltd. Proprietary

6-11

NPT Product Line System Specifications

NPT-1020 Specifications

6.14 Ethernet Specifications


This section describes the Ethernet specifications for the NPT-1021.

Parent Topic

6 NPT-1020 Specifications

6.14.1 NPT-1020 (Packet Switch without CPS50)


Built-in interfaces

4 x 100/1000Base-X (with optical SFP)


8 x 10/100/1000Base-T

Number of PoE ports

4 x 10/100/1000Base-T

PoE PSE pin-out

IEEE 802.3af, Alternative A

Supported PD type

IEEE 802.3at type 1, type 2

Maximum PoE power per port

30 W

Number of Sync-E ports

12 (all GbE ports)

Supported types of 1588v2 PTP Clock

OC (slave or master)
two-step TC

Switch capacity

10 Gbps

MAC address table capacity

128 K

Supported VLAN quantity

4000 * 4094, as per IEEE 802.1ad

Supported C-VLAN groups

16000

Supported MPLS P2P tunnel queues

8000

Supported Bidirectional LSPs

2048

Maximum number of LSP1:1 Linear Protection


Domains

1024

Supported MPLS P2MP tunnels

32

Supported maximum PWs

8000

Supported maximum VSIs

4000

Supported maximum policers

4000

Supported maximum policer profiles

128

Sync-E

12 GbE ports

CIR/EIR granularity of policer

64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)

CIR granularity of high CoS Shaper

128K~512Kbps@128Kbps
1~16Mbps@1Mbps
16~64Mbps@2Mbps
64~256Mbps@4Mbps
256~1280Mbps@8Mbps

ECI Telecom Ltd. Proprietary

6-12

NPT Product Line System Specifications

NPT-1020 Specifications

CIR granularity of low CoS bandwidth

128K~512Kbps@128Kbps
1~16Mbps@1Mbps
16~64Mbps@2Mbps
64~256Mbps@4Mbps
256~1280Mbps@8Mbps

PIR granularity of E-LSP bandwidth

1~No rate limit@1Mb/s

Maximum sites per VPLS instance

255-number of UNI/NNI

Maximum number of UNI/NNI ports per VSI

64

Queues in each egress port

MSTP/ERPS instance number

32

Supported maximum multicast groups per Rooted 1024


MP leaf VSI
Max MTU size

9736 bytes

LAG support

up to 32 LAGs with up to 8 port members per LAG

Supported BFD intervals

3.33 ms, 10 ms, 100 ms, 1000 ms

Maximum number of BFD sessions

600

Maximum number of BFD sessions over


Bidirectional LSP

500

Maximum number of BFD sessions for section

Maximum number of ports

Maximum number of BFD templates

10

Supported CFM intervals

3.33 msec, 10 msec, 100 msec


1 sec,10 sec, 60 sec, 600 sec (slow)

Maximum number of 3.33 msec/10 msec/100


msec/1000 msec CCM sessions

500

Maximum aggregated packet rate for slow CCM


(1 sec/10 sec/1 min/10 min)

200 pps

Total number of 3.33 msec BFD and CCM sessions <=100


Total number of 10 msec/100 msec CCM and 10
msec/100 msec/1000 msec BFD sessions

<=500

Standards compliance

IEEE802.1p, IEEE802.1Q, IEEE802.1ad,


IEEE802.1w, IEEE802.1s, IEEE802.1ag
IEEE802.3, IEEE802.3x, IEEE802.3ad, IEEE802.3ah,
IEEE802.3u, IEEE802.3z
RFC3031, RFC3032, RFC3916, RFC3985, RFC4090
RFC5586, RFC5654, RFC5880, RFC5921, RFC6428,
RFC6378, RFC6427
ITU-T Y.1710, Y.1711, Y.1731,
G.707, G.783, G.7041 (GFP), G.7042 (LCAS), G.8032
MEF9, MEF10, MEF14

Parent Topic

6.13 Ethernet Specifications


ECI Telecom Ltd. Proprietary

6-13

NPT Product Line System Specifications

NPT-1020 Specifications

6.14.2 NPT-1020 (with Packet Switch CPS50)


Built-in interfaces on CPS50

2 x SFP+ each can be configured as


10GBase-R/10GBase-W
2 x SFP+/SFP/CSFP compatible each can be configured as
one 1 x 10GBase-R/10GBase-W (with SFP+), 1 x 1000Base-X
(with optical SFP), or 2 x 1000Base-X (with CSFP)

Built-in interfaces on base card

4 x 100/1000Base-X (with optical SFP)


8 x 10/100/1000Base-T

Number of PoE ports

4 x 10/100/1000Base-T

PoE PSE pin-out

IEEE 802.3af, Alternative A

Supported PD type

IEEE 802.3at type 1, type 2

Maximum PoE power per port

30 W

Supported types of 1588v2 PTP Clock

OC (slave, transparent, or master)


two-step TC

Switch capacity

60 Gbps

MAC address table capacity

128 K

Supported VLAN quantity

4000 * 4094, as per IEEE 802.1ad

Supported C-VLAN groups

16000

Supported MPLS P2P tunnel queues

16000

Supported Bidirectional LSPs

2048

Maximum number of LSP1:1 Linear Protection 1024


Domains
Supported MPLS P2MP tunnels

32

Supported maximum PWs

16000

Supported maximum VSIs

4000

Supported maximum policers

4000

Supported maximum policer profiles

256

Sync-E

4 GbE ports

CIR/EIR granularity of policer

64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)

CIR granularity of high CoS Shaper

1~16Mbps@1Mbps
16~32Mbps@4Mbps
32~80Mbps@8Mbps
80~128Mbps@16Mbps
128~896Mbps@32Mbps
896, 960, 1280Mbps

ECI Telecom Ltd. Proprietary

6-14

NPT Product Line System Specifications

NPT-1020 Specifications

CIR granularity of low CoS bandwidth

~16Mbps@1Mbps
16~32Mbps@4Mbps
32~80Mbps@8Mbps
80~128Mbps@16Mbps
128~896Mbps@32Mbps
896,960,1280,2048,2560, 3072,4096,5120,10000Mbps

PIR granularity of E-LSP bandwidth

1~No rate limit@1Mb/s

Maximum sites per VPLS instance

255-number of UNI/NNI

Maximum number of UNI/NNI ports per VSI

64

Queues in each egress port

MSTP/ERPS instance number

32

Supported maximum multicast groups per


Rooted MP leaf VSI

1024

LAG support

up to 32 LAGs with up to 8 port members per LAG

Supported BFD intervals

3.33 msec, 10 msec, 100 msec, 1000 msec

Maximum number of BFD sessions

600

Maximum number of BFD sessions over


Bidirectional LSP

500

Maximum number of BFD sessions for section

Maximum number of ports

Maximum number of BFD templates

10

Supported CFM intervals

3.33 msec, 10 msec, 100 msec


1 sec,10 sec, 60 sec, 600 sec (slow)

Maximum number of 3.33 msec/10 msec/100 500


msec/1000 msec CCM sessions
Maximum aggregated packet rate for slow
CCM (1 sec/10 sec/1 min/10 min)

200 pps

Total number of 3.33 msec BFD and CCM


sessions

<=100

Total number of 10 msec/100 msec CCM and


10 msec/100 msec/1000 msec BFD sessions

<=500

Standards compliance

IEEE802.1p, IEEE802.1Q, IEEE802.1ad,


IEEE802.1w, IEEE802.1s, IEEE802.1ag
IEEE802.3, IEEE802.3x, IEEE802.3ad, IEEE802.3ah,
IEEE802.3u, IEEE802.3z
RFC3031, RFC3032, RFC3916, RFC3985, RFC4090
RFC5586, RFC5654, RFC5880, RFC5921, RFC6428, RFC6378,
RFC6427, RFC2544 (up to 1G)
ITU-T Y.1710, Y.1711, Y.1731,
G.707, G.783, G.7041 (GFP), G.7042 (LCAS), G.8032
MEF9, MEF10, MEF14

Parent Topic

6.13 Ethernet Specifications


ECI Telecom Ltd. Proprietary

6-15

NPT Product Line System Specifications

NPT-1020 Specifications

6.14.3 DHGE_4E
Interface connector type

4 x RJ45

Supported ports

4 x 10/100/1000Base-Tx with PoE support

PoE PSE pin-out

IEEE 802.3af, Alternative A

Supported PD type

IEEE 802.3at type 1, type 2

Maximum PoE power per port

30 W

Number of Sync-E ports

4 (all ports)

Number of Sync-E Tx clock domains

2 (System clock, PTP slave clock)

Standards compliance

IEEE802.3
ITU-T G.8262

Parent Topic
6.13 Ethernet Specifications

6.14.4 DHGE_8
Interface connector type

4 x SFP

Supported port types

1000Base-SX, LX, EX, ZX


100Base-FX (SM and MM)

Maximum number of 1000Base-X ports

Maximum number of 100Base-FX ports

Maximum number of 10/100/1000Base-T ports

4 (with copper SFP ETGBE)

Number of Sync-E ports

Standards compliance

IEEE802.3
ITU-T G.8262

Parent Topic
6.13 Ethernet Specifications

6.14.5 DMCES1_4
Interfaces

4 x channelized STM-1(SFP)
1 x channelized STM-4 (SFP)
1 x GbE SFP

CES service

Unstructured E1 (SAToP)
Channelized E1 (CESoPSN)

Number of CES service

252

Encapsulation Protocol in standalone mode CESoETH, CESoIP/UDP


Encapsulation Protocol in integration mode CESoETH and CESoMPLS

ECI Telecom Ltd. Proprietary

6-16

NPT Product Line System Specifications

NPT-1020 Specifications

CES clock recovery mechanism

Adaptive Clock Recovery (ACR)


Differential Clock Recovery (DCR)

Reference clock frequency for DCR RTP


timestamp

19.44 MHz
25 MHz

Number of ACR domains

32

Number of DCR domain

252

E1 Tx Timing mode

Recovered from CES stream


System timing
Loop timing

Payload time

125~8000us@125us

Jitter buffer Max delay var

1000-64000 @1000 sec

Jitter buffer Min latency

500-32000 @500 sec

Standards compliance

IEFT RFC4553, RFC5086


MEF8, MEF3
ITU-T Y.1413, G.707, G.783

Parent Topic
6.13 Ethernet Specifications

6.14.6 DMCE1_32
Interfaces

32 x E1
1 x GbE Combo

CES service

Unstructured E1 (SAToP)
Channelized E1 (CESoPSN)

Number of CES service

32

Encapsulation Protocol in standalone mode CESoETH, CESoIP/UDP


Encapsulation Protocol in integration mode CESoETH, CESoMPLS
CES clock recovery mechanism

Adaptive
Differential

Reference clock frequency for DCR RTP


timestamp

19.44 MHz
25 MHz

Adaptive timing domain

32

Differential timing domain

32

Tx Timing mode

Recovered from CES stream


System timing
Loop timing

Payload time

125~8000us@125us

Jitter buffer Max delay var

1000-64000 @1000 sec

Jitter buffer Min latency

500-32000 @500 sec

ECI Telecom Ltd. Proprietary

6-17

NPT Product Line System Specifications

NPT-1020 Specifications

Standards compliance

IEFT RFC4553, RFC5086


MEF8, MEF3
ITU-T Y.1413, G.703

Parent Topic
6.13 Ethernet Specifications

6.14.7 MSE1_16
Interfaces

16 x E1/T1

CES service

Unstructured E1/T1 (SAToP)


Channelized E1/T1 (CESoPSN)

Number of CES service

16

Encapsulation Protocol

CESoETH, CESoMPLS

CES clock recovery mechanism

Adaptive
Differential

Reference clock frequency for DCR


RTP timestamp

19.44 MHz
25 MHz

Adaptive timing domain

16

Differential timing domain

16

Tx Timing mode

Recovered from CES stream


System timing
Loop timing

Payload time

125~8000us@125us

Jitter buffer Max delay var

1000-64000 @1000 sec

Jitter buffer Min latency

500-32000 @500 sec

Standards compliance

IEFT RFC4553, RFC5086


MEF8, MEF3
ITU-T Y.1413, G.703

Parent Topic
6.13 Ethernet Specifications

6.14.8 MPoE_12G
Interface type

4 x 1000Base-X/100Base-FX
8 x 10/100/1000Base-Tx with PoE

PSE pin-out

IEEE 802.3af, Alternative A

Supported PD type

IEEE 802.3at type 1, type 2

Maximum PoE power per card

90 W

ECI Telecom Ltd. Proprietary

6-18

NPT Product Line System Specifications

NPT-1020 Specifications

Number of Sync-E ports

12 (all GbE ports)

Supported types of 1588v2 PTP Clock

OC (slave or master)
Two-step TC

Switch capacity

10 Gbps

MAC address table capacity

128 K

MAC address table capacity per VSI

64 K

Supported VLAN quantity

4000 * 4094, as per IEEE 802.1ad

Supported C-VLAN groups

16000

Supported MPLS P2P tunnel queues

8000

Supported Bidirectional LSPs

2048

Maximum number of LSP1:1 Linear


Protection Domains

1024

Supported MPLS P2MP tunnels

32

Supported maximum PWs

16000

Supported maximum VSIs

4000

Supported maximum policers

4000

Supported maximum policer profiles

128

CIR/EIR granularity of policer

64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)

CIR granularity of high CoS Shaper

128K~512Kbps@128Kbps
1~16Mbps@1Mbps
16~64Mbps@2Mbps
64~256Mbps@4Mbps
256~1280Mbps@8Mbps

CIR granularity of low CoS bandwidth

128K~512Kbps@128Kbps
1~16Mbps@1Mbps
16~64Mbps@2Mbps
64~256Mbps@4Mbps
256~1280Mbps@8Mbps

PIR granularity of E-LSP bandwidth

1~No rate limit@1Mb/s

Maximum sites per VPLS instance

255-number of UNI/NNI

Maximum number of UNI/NNI port per VSI 64


Maximum number of CoSs

MSTP/ERPS instance number

32

Supported maximum multicast groups per 1024


rooted MP leaf VSI
LAG support

up to 32 LAGs with up to 8 port members per LAG

Supported BFD intervals

3.33 msec (fast BFD), 10 msec, 100 msec, 1000 msec

Maximum number of BFD sessions

600

ECI Telecom Ltd. Proprietary

6-19

NPT Product Line System Specifications

NPT-1020 Specifications

Maximum number of BFD sessions over


Bidirectional LSP

500

Maximum number of BFD sessions for


section

Maximum number of ports

Maximum number of BFD templates

10

Supported CFM intervals

3.33 msec, 10 msec, 100 msec


1 sec,10 sec, 60 sec, 600 sec (slow)

Maximum number of 3.33 msec/10


msec/100 msec/1000 msec CCM sessions

500

Maximum aggregated packet rate for slow 200 pps


CCM (1s/10s/1min/10min)
Total number of 3.33 msec BFD and CCM
sessions

<=100

Total number of 10 msec/100 msec CCM


and 10 msec/100 msec/1000 msec BFD
sessions

<=500

Standards compliance

IEEE802.1p, IEEE802.1Q, IEEE802.1ad


IEEE802.1w, IEEE802.1s, IEEE802.1ag
IEEE802.3, IEEE802.3x, IEEE802.3ad, IEEE802.3ah
IEEE802.3u, IEEE802.3z
IEEE802.3at (PoE+), IEEE 802.3af (PoE)
RFC3031, RFC3032, RFC3916, RFC3985, RFC4090
RFC5586, RFC5654, RFC5880, RFC5921, RFC6428, RFC6378,
RFC6427
ITU-T Y.1710, Y.1711, Y.1731
G.707, G.783, G.7041 (GFP), G.7042 (LCAS), G.8032
MEF9, MEF10, MEF14

Parent Topic
6.13 Ethernet Specifications

6.14.9 Ethernet Transceivers


Table 6-5: GbE/FX client transceivers

Transmitter type

OTGBE_SX

OTGBE_LX

OTGBE_ZX

OTGBE_EX

OTFE_MM

OTFE_SM

GbE/FC1/

GbE/FC1/
FICON(2)
long-reach laser,
1310 nm, single
mode

GbE/FC1/
FICON(2)
very long-reach
laser, 1550 nm,
single mode

GbE/FC1/
FICON(2)
very long-reach
laser, 1550 nm,
single mode

FX, short-reach
laser, 1310
multimode

FX, short-reach
laser, 1310 nm,
single mode

1.0625/1.25/

1.0625/1.25/

1.0625/1.25/

1.0625/1.25

0.125

0.125

2.125

2.125

2.125

FICON(2)
short-reach
laser, 850 nm,
multimode
Data rate
(nominal) (Gbps)

ECI Telecom Ltd. Proprietary

6-20

NPT Product Line System Specifications

NPT-1020 Specifications

OTGBE_SX

OTGBE_LX

OTGBE_ZX

OTGBE_EX

OTFE_MM

OTFE_SM

Max.

-3

-3

-15

-8

Min.

-9

-11

-5

-20

-15

Min. transmitter
extinction ratio
(dB)

10

8.2

Data format

8B/10B

8B/10B

8B/10B

8B/10B

N/A

N/A

Min.

-20

-22

-22

-24

-31

-28

Typical

-21

-25.5

--

--

-30

--

Max. receiver
overload (dBm)

-14

-8

Typical Rx LOS
level (dBm)

-24

-29

-25

-25

< -33

< -28

Connector

LC

LC

LC

LC

LC

LC

Fiber lengths

550 m

10 km

80 km

40 km

2000 m

10 km

(50/62.5 m
MMF)

(9 m SMF)

(9 m SMF)

(9 m SMF)

(50/62.5 m
MMF)

(9 m SMF)

Average launch
power (dBm)

Average receiver
sensitivity (dBm)

Table 6-6: GbE bidirectional client transceivers


OTGBE_S3BD

OTGBE_S5BD

OTGBE_L3BD

OTGBE_L5BD

OTGBE_L5BD80

OTGBE_L6BD8
0

Transmitter type

Bidirectional SFP,
1310 nm

Bidirectional SFP,
1490 nm

Bidirectional SFP,
1310 nm e

Bidirectional SFP,
1490 nm

Bidirectional SFP,
1490 nm

Bidirectional
SFP, 1590 nm

Data rate (nominal)


(MBaud)

1250

1250

1250

1250

1250

1250

Average launch
power (dBm)

-3 Max.

-3

+2

+2

+4

+4

-10 Min.

-10

-5

-5

-2

-2

Min. transmitter
>9
extinction ratio (dB)

>9

>9

>9

Data format

8B/10B

8B/10B

8B/10B

8B/10B

8B/10B

8B/10B

Average receiver
sensitivity (dBm)

< -21

< -21

< -23

< -23

-26

-26

Min. overload (dB)

-3

-3

-3

-3

-3

-3

Typical Rx LOS level


(dBm)

< -22

< -22

< -24

< -24

< -26

< -26

Connector

LC

LC

LC

LC

LC

LC

Fiber lengths

10 km

10 km

40 km

40 km

80 km

80 km

(9 m SMF)

(9 m SMF)

(9 m SMF)

(9 m SMF)

(9 m SMF)

(9 m SMF)

ECI Telecom Ltd. Proprietary

6-21

NPT Product Line System Specifications

NPT-1020 Specifications

Parent Topic
6.13 Ethernet Specifications

6.14.10 CWDM and DWDM STM-16/GbE (2488 Mbps 4.6


ppm)
Table 6-7: CWDM and DWDM STM-16/GbE transceivers
CWDM

DWDM

SFP TRANSCEIVER NAME129

OTC25_PSxx

OTC25_1ALxx

OTR25_AVxx

OTR25_ABxx

APPLICATION CODE130

S-C8S1-1D2/5

S-C8L1-1D2/5

G.695

G.695

DW100L\--1D2/5(C)F
DW100C\--1A2/5(C)F

DW100L\--1D2/5(C)F
DW100C\--1A2/5(C)F

G.698.1/.2

G.698.1/.2

1464-1618

1464-1618

1530-1565

1530-1565

Source type

SLM

SLM

SLM

SLM

Max. -20 dB width (nm)

0.4

0.4

Max. RMS width (nm)

Min. side mode suppression (dB)

30

30

30

30

Min. mean launched power (dBm)

Max. mean launched power (dBm)

+5

+5

Min. extinction ratio (dB)

8.2

8.2

8.2

8.2

-21.5

-28

-28

-28

(-23 GbE)

(-32 GbE)

Min. overload (dBm)

-7

-9

-9

Max. receiver reflectance (dB)

-27

-27

-27

-27

800

1600

2400

3600

(40 km G.652)

(80 km G.652)

(120 km G.652)

(180 km G.652)

Min. optical return loss of cable (dB)

24

24

-24

-24

Max. discrete reflectance (dB)

-27

-27

-27

-27

Max. optical path penalty (dB)

1.5

2.5

<3

<2

Operating wavelength (nm)


TRANSMITTER

RECEIVER
Min. sensitivity (BER of 1*10-12) EOL (dBm)

OPTICAL PATH BETWEEN S & R


Max. dispersion [ps/nm]

129

New optical SFP transceivers for existing SIO16 basecard.

130

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

6-22

NPT Product Line System Specifications

NPT-1020 Specifications

Parent Topic
6.13 Ethernet Specifications

6.14.11 Ethernet SFP+ Transceivers


Table 6-8: SFP+ client transceivers
SFP+ TRANSCEIVER
NAME

OTP10I_ER

APPLICATION
CODE131

10GBASE-ER

OTP10_ER

OTP10_ZR

OTP10_SR

OTP10_LR

OTP10_LRM

OTP10Txx
(Linear version)

10GBASE-ER

L-64.2a

10GBASE-SR

10GBASE-LR

10GBASE-LRM

ALLM (Limiting
version) or ALLN
(Linear version)

P1L1-2D2

TRANSMITTER
Operating
wavelength (nm)

1530-1565

1530-1565

1530-1565

840-860

1260-1355

1260-1355

C-Band Tunable
1528-1568

Source type

SLM

SLM

SLM

SLM

SLM

SLM

C-Band cooled
tunable

Modulation

N/A

N/A

N/A

N/A

N/A

N/A

Spacing (GHz)

NA

NA

NA

NA

NA

NA

Max. -20 dB width


(nm)

NA

NA

<1

NA

NA

NA

Min. side mode


suppression (dB)

30

30

30

NA

30

NA

35

Min. mean launched


power (dBm)

-4.7

-4.7

-7.3

-8.2

-6.5

-1

Max. mean launched +4


power (dBm)

+4

+4

-1

+0.5

+0.5

+3

Min. extinction ratio


(dB)

3.5

3.5

Max. attenuation
(dB)

11.1

11.1

22

6.2

Min. Attenuation
(dB)

11

Min. sensitivity (BER


of 1*10-12)

-14.1

-14.1

-24

-11

-12.6

-6.5

-22

Min. overload (dBm)

-1

-1

-7

-1

0.5

0.5

-7

Max. receiver
reflectance (dB)

-27

-27

-27

-27

-27

-27

N/A

RECEIVER

EOL (dBm)

131

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

6-23

NPT Product Line System Specifications

SFP+ TRANSCEIVER
NAME

OTP10I_ER

APPLICATION
CODE131

10GBASE-ER

OTP10_ER

NPT-1020 Specifications

OTP10_ZR

OTP10_SR

OTP10_LR

OTP10_LRM

OTP10Txx
(Linear version)

10GBASE-ER

L-64.2a

10GBASE-SR

10GBASE-LR

10GBASE-LRM

ALLM (Limiting
version) or ALLN
(Linear version)

P1L1-2D2

OPTICAL PATH
BETWEEN S & R
Max. dispersion
[ps/nm]

N/A

N/A

N/A

N/A

N/A

N/A

1600

Min. optical return


loss of cable (dB)

21

21

21

12

12

20

Max. discrete
reflectance (dB)

-26

-26

-27

-12

-12

-12

Max. optical path


penalty (dB)

3.9

3.2

4.7

OCH switching time


(ms)

N/A

N/A

N/A

N/A

N/A

N/A

Table 6-9: SFP+ bidirectional client transceivers


SFP+ TRANSCEIVER NAME

OTP10_S27BD

OTP10_S33BD

OTP10_L27BD

OTP10_L33BD

APPLICATION CODE132

10GBASE-S27BD

10GBASE-S33BD

10GBASE-L27BD

10GBASE-L33BD

Source type

CWDM DFB

CWDM DFB

CWDM DFB

CWDM DFB

Modulation

N/A

N/A

N/A

N/A

Operating output
wavelength (nm)

1260-1280

1320-1340

1260-1280

1320-1340

Direct max.-20 dB width


(nm)

N/A

N/A

N/A

N/A

Min. side mode


suppression ratio (dB)

30

30

30

30

Min. mean launched


power (dBm)

-5

-5

Max. mean launched


power (dBm)

Min. extinction ratio (dB)

3.5

3.5

3.5

3.5

Maximum attenuation (dB) 9

19

19

Minimum attenuation (dB)

10

10

Max. dispersion (ps/nm)

N/A

N/A

N/A

N/A

Maximum optical return


loss (dB)

12

12

12

12

132

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

6-24

NPT Product Line System Specifications

NPT-1020 Specifications

SFP+ TRANSCEIVER NAME

OTP10_S27BD

OTP10_S33BD

OTP10_L27BD

OTP10_L33BD

Maximum discrete
reflectance

-12

-12

-12

-12

Maximum DGD (ps)

N/A

N/A

N/A

N/A

Sensitivity (BER of 1*10 12) -14


(dBm)

-14

-18

-18

Min. overload (dBm)

05

0.5

-5

-5

Maximum optical path


penalty

3.2

3.2

3.2

3.2

OCH switching time (ms)

N/A

N/A

N/A

N/A

Table 6-10: SFP+ C/DWDM transceivers


SFP+ TRANSCEIVER NAME

OTP10C_PSxx

OTP10D_ALxx

APPLICATION CODE133

PS

AL

Operating wavelength (nm)

1471, 1491, 1511, 1531, 1551, 1571, 1591,


1611

1529.55-1561.61

Source type

CWDM DFB

DWDM EML

Modulation

TRANSMITTER

Spacing (GHz)

100

Max. -20 dB width (nm)

Min. side mode suppression (dB)

30

30

Min. mean launched power (dBm)

-4.7

-1

Max. mean launched power (dBm)

+4

+3

Min. extinction ratio (dB)

8.2

Max. attenuation (dB)

11.1

22

Min. Attenuation (dB)

10

Min. sensitivity (BER of 1*10-12) EOL (dBm)

-15.8

-23

Min. overload (dBm)

-1

-7

Max. receiver reflectance (dB)

-26

-27

Max. dispersion [ps/nm]

800

1600

Min. optical return loss of cable (dB)

21

27

RECEIVER

OPTICAL PATH BETWEEN S & R

133

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

6-25

NPT Product Line System Specifications

NPT-1020 Specifications

SFP+ TRANSCEIVER NAME

OTP10C_PSxx

OTP10D_ALxx

Max. discrete reflectance (dB)

Max. optical path penalty (dB)

3.5

OCH switching time (ms)

Parent Topic

6.13 Ethernet Specifications

6.14.12 CSFP Client Transceivers


Table 6-11: CSFP client transceivers
CSFP TRANSCEIVER

CTGBE_S3S5

CTGBE_S5S3

CTGBE_L3L5

CTGBE_L5L3

CTGBE_E3E5

CTGBE_E5E3

APPLICATION CODE134

S3S5

S5S3

L3L5

L5L3

E3E5

E5E3

Operating wavelength (nm)

1310

1490

1310

1490

1310

1490

Source type

FP

DFB

FP

DFB

DFB

DFB

Max. RMS width (nm)

3.5

3.5

Min. side mode suppression (dB)

30

30

Min. mean launched power (dBm)

-9

-9

-8

-8

-5

-5

Max. mean launched power (dBm)

-3

-3

-2

-2

Min. extinction ratio (dB)

Min. sensitivity (BER of 1*10-12)


EOL (dBm)

-20

-20

-22.5

-22.5

-24

-24

Min. overload (dBm)

-3

-3

-2

-2

Max. receiver reflectance (dB)

Max. dispersion [ps/nm]

Min. optical return loss of cable (dB)

Max. discrete reflectance (dB)

Max. optical path penalty (dB)

TRANSMITTER

RECEIVER

OPTICAL PATH BETWEEN S & R

Parent Topic
6.13 Ethernet Specifications

134

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

6-26

NPT Product Line System Specifications

NPT-1020 Specifications

6.14.13 Electrical GbE SFP (ETGbE)


ETGBE

Notes

Data rate

10/100/1000 Mbps

IEEE 802.3 compatible

Connector

RJ-45

Cable type

CAT 5

Cable length

100m

Parent Topic
6.13 Ethernet Specifications

6.15 Optical Amplifier Modules


The OM_BA is an optical booster for the C Band. OM_PA is a preamplifier for the C Band. OM_ILA is an
optical amplifier optimized for in-line sites for links of up to 500 km with up to 80 channels (supports all C
Band channels). The amplifiers are housed in a dedicated Optical Base Card (OBC) that can be installed in
the EXT-2U shelf. For more details regarding the OBC, OM_BA, OM_PA, and OM_ILA refer to the NPT
Reference Manual.
Table 6-12: Optical amplifier specifications
Parameter

OM_BA (Single
Channel)

OM_PA (Single
Channel)

OM_ILA
(DWDM)

Input power (dBm)

-7 +4

-35 - -18

-24 - +6

Output power (dBm)

10 - 15

-12

-4 - +16

Spectrum (nm)

1528.8 1564.2

1549.32

1528.8 1564.2

Gain tilt (Ch. 21-36) (dB)

<3

Gain tilt (Ch. 21-60) (dB)

<7

Passband width, < 0.5 dB loss (GHz)

N/A

N/A

N/A

Passband width, < 1.0 dB loss (GHz)

N/A

N/A

N/A

Noise figure (dB)

< 9.8

<6

<8.0+(21-Gain)

Polarization-dependent gain (dB)

< 0.5

< 0.5

< 0.3

Polarization mode dispersion (ps)

< 0.5

< 0.5

< 0.25

Return loss (dB)

> 40

> 40

> 45

Power consumption (Watt)

<8

<8

< 18

Monitor port tap fraction (%)

N/A

N/A

N/A

Automatic Laser Shutdown (ALS)

< 150 ms

< 150 ms

< 150 ms

-2 - 0

Parent Topic

6 NPT-1020 Specifications

ECI Telecom Ltd. Proprietary

6-27

NPT Product Line System Specifications

NPT-1020 Specifications

6.16 Dispersion Compensation Modules


The OM_DCMxx are dispersion compensation modules used to correct excessive dispersion on long fibers.
The modules are housed in a dedicated Optical Base Card (OBC) that can be installed in the EXT-2U shelf.
For more details regarding the OBC, and OM_DCMxx refer to NPT Reference Manual.

NOTE:

The suffix xx in the module name designates the distance (nominal compensation
length) in km.
The following section provides the OM_DCMxx modules specifications.
Operating wavelength

1549.32 nm

Return Loss:

> 50 dB

Connector

LC

Fiber

G.652

Table 6-13: OM_DCMxx specifications


Nominal compensation length

Typical dispersion @ 1549.32 nm [ps/nm]

Max. insertion loss [dB]

40 - 60 km

960

2.65

80 - 100 km

1600

2.65

100 - 120 km

1920

2.65

Parent Topic
6 NPT-1020 Specifications

6.17 MXP10 Base Card Configurations


Card

No. of
ESlots

Function/
Description

MXP10

Base card for multirate combiner, transponder or ADM on Card supporting 12 CSFP
(6 x SFP) ports of GbE, FC1/2/4, STM-1/4/16/64, OTU1. Supports FEC and EFEC on
the line side.

Parent Topic
6 NPT-1020 Specifications

6.17.1 MXP10 Base Card Modules and Transceivers


Card

ECI Telecom Ltd. Proprietary

Function/
Description

6-28

NPT Product Line System Specifications

Card

NPT-1020 Specifications

Function/
Description

Client module and transceivers for MXP10


OM_AOC4

Optical module for up to 4 x SFP based ports , one module per MXP10 card

Line transceivers for MXP10


OTP10C_PSxx

Optical OTU2/OTU2e/STM64/10GE/FC-1200 transceiver, CWDM

OTP10D_ALxx

Optical OTU2/OTU2e/STM64/10GE/FC-1200 transceiver, DWDM

OTP10T_AL

Tunable SFP+

OTPMR10

Multi-rate SFP+ for OTU2/OTU2e/STM64/10GE/FC-800/FC-1200

Client SFP transceivers for MXP10


OTGBE_SX

Optical GbE/FC/FICON transceiver, short reach, 850 nm multimode fiber

OTGBE_LX

Optical GbE/FC/FICON transceiver, long reach, 1310 nm single mode fiber

OTGBE_ZX

Optical GbE/FC/FICON transceiver, very long reach, 1550 nm single mode fiber

OTGBE_S3BD

Bi-directional GbE SFP with 1310nm TX/1490nm Rx. Short Range (10km)

OTGBE_S5BD

Bi-directional GbE SFP with 1490nm TX/1310nm Rx. Short Range (10km)

OTR16_I3

STM-16/OC-48 transceiver, intra-office 1310 nm

OTR16_S3

STM-16/OC-48 transceiver, short-haul 1310 nm

OTR16_L3

STM-16/OC-48 transceiver, long-haul 1310 nm

OTR16_L5

STM-16/OC-48 transceiver, long-haul 1550 nm

OTC25_PSxx

2.7 Gbps CWDM transceiver (with or without outband FEC), short haul with PIN receiver

OTC25_ALxx

2.7 Gbps CWDM transceiver (with or without outband FEC), long haul with APD receiver

OTR25_AVxx

DWDM SFP: 2.5/2.7G transceiver 2400 ps/nm, channel xx, LC connectors

OTR25_ABxx

DWDM SFP: 2.5/2.7G transceiver 3240 ps/nm, channel xx, LC connectors

Parent Topic
6.16 MXP10 Base Card Configurations

6.18 EM_10E Specifications


Interfaces

FXO, FXS, 2W, 4W, 6W, E&M, V.11


V.24, V.35, V.36, Codir 64 Kbps, Omni 64Kbit/s,
C37.94, RS-422, RS-449

DS-0 cross-connect capacity

682

Number of CES E1 uplinks

16

CES service

Unstructured E1 (SAToP)
Channelized E1 (CESoPSN)

Number of CES service

16

ECI Telecom Ltd. Proprietary

6-29

NPT Product Line System Specifications

NPT-1020 Specifications

Encapsulation Protocol

CESoETH, CESoMPLS

CES clock recovery mechanism

Adaptive
Differential

Reference clock frequency for DCR


RTP timestamp

19.44 MHz
25 MHz

Tx Timing mode

Recovered from CES stream


System timing
Loop timing

Payload time

125~8000us@125us

Jitter buffer Max delay var

1000-64000 @1000 sec

Jitter buffer Min latency

500-32000 @500 sec

Standards compliance

G.703, G.704, G.732, G.735, G.736, G.796, IEEE C37.94


V.11, V.24, V.28, V.110, V.14
IETF RFC4553, RFC5086
MEF8, MEF3
ITU-T Y.1413, G.703

Parent Topic
6 NPT-1020 Specifications

6.19 SM_10E Specifications


Interfaces

FXO, FXS, 2W, 4W, 6W, E&M, V.11, V.24, V.35, V.36, Codir 64Kbit/s, Omni
64Kbit/s, EOP, C37.94, RS-422, RS-449

DS-0 cross-connect capacity

1178

Number of E1 uplinks

32 (framed)
12 (unframed)

Standards compliance

G.703, G.704, G.732, G.735, G.736, G.796, V.11, V.24, V.28, V.110, V.14,
G.7041 (GFP), G.7043 (PDH VCAT), G.8040 (GFP mapping into PDH) IEEE
C37.94

Parent Topic
6 NPT-1020 Specifications

6.19.1 SM_10E Total Capacity


44 x E1 capacity

32 x E1 to the 1/0 XC + 12 x E1 directly to the modules

Parent Topic
6.18 SM_10E Specifications

ECI Telecom Ltd. Proprietary

6-30

NPT Product Line System Specifications

NPT-1020 Specifications

6.19.2 SM_10E DXC1/0 XC Capacity


Capacity

1178 x DS-0 bidirectional (32 x E1 from SDH matrix + 6 x E1 from modules)

Functionality

64 Kbps timeslot interchange

CAS XC

CAS configuration in accordance with corresponding voice channels

Parent Topic
6.18 SM_10E Specifications

6.19.3 EM_10E Total Capacity


22 x E1 capacity

16 x E1 to the 1/0 XC + 6 x E1 directly to the modules

Parent Topic
6.18 SM_10E Specifications

6.19.4 EM_10E DXC1/0 XC Capacity


DS0 XC Matrix

682 x DS-0 bidirectional


(16 x CES E1 + 6 x E1 from modules)

E1 XC Matrix

16 x CES E1 + 16 x E1 from DS0 XC Matrix + 12 x E1 directly to the modules

Functionality

64 Kbps timeslot interchange between modules and CES E1

CAS XC

CAS configuration in accordance


with corresponding voice channels

Parent Topic
6.18 SM_10E Specifications

6.19.5 Timing
Any of the following clock sources can be selected as a timing reference:

Any Dslot (SM_CODIR_4E, SM_V35_V11)

Internal clock source

SDH distributed timing

Two of 32 possible clocks derived from the cards E1 mappers and framers (SM_10E only)

Two of 16 possible clocks recovered from CES E1 (EM_10E only)

Parent Topic
6.18 SM_10E Specifications

ECI Telecom Ltd. Proprietary

6-31

NPT Product Line System Specifications

NPT-1020 Specifications

6.19.6 FXO/FXS Interface


Maximum number of channels 8 (per module)
Impedance

600 W balanced

ITU-T standards compliance

G.711 and G.712

PCM Coding

A-Law

Additional specifications are shown in the following table.


Table 6-14: FXO and FXS specifications
Characteristic
Main characteristic

FXO

FXS

< 100 mA

25 mA

Subcharacteristic

DC current loop
Line loop DC resistor
Return loss 300-3,400 Hz

Total harmonic distortion


D A and A D

Unbalance relative to ground


Idle channel noise
Hook detection time
Gain
Digital pulse supported width
Transmission distance

< 2000
300-500 Hz

> 14 dB

> 14 dB

500-2,000 Hz

> 18 dB

> 18 dB

2,000-3,400 Hz

> 14 dB

> 14 dB

-45 dBm0

> 24 dB

> 24 dB

-40 dBm0

> 29 dB

> 29 dB

-30 dBm0

> 35 dB

> 35 dB

-20 dBm0

> 35 dB

> 35 dB

-10 dBm0

> 35 dB

> 35 dB

0 dBm0

> 35 dB

> 35 dB

300-600 Hz

> 40 dB

> 40 dB

600-3,400 Hz

> 46 dB

> 46 dB

AD

< -65 dB

< -65 dB

DA

< -67 dB

< -67 dB

Minimum

2 msec

2 msec

Maximum

Unlimited

Unlimited

Rx

-3.5 dB

-3.5 dB

Tx

0 dB

0 dB

Sample rate

500 Hz

Minimum width

2 msec

0.4 mm cables

~ 4 km

0.5 mm cables

~ 6 km

Parent Topic
6.18 SM_10E Specifications
ECI Telecom Ltd. Proprietary

6-32

NPT Product Line System Specifications

NPT-1020 Specifications

6.19.7 Ringer Characteristics


Total power

10 W

Maximum load

12 REN

Voltage

75 V RMS

Frequency

25 Hz

Parent Topic
6.18 SM_10E Specifications

6.19.8 2 Wire/4 Wire/6 Wire and E&M Interface


Maximum number of channels

6 (per module)

Impedance

600 ohm balanced

Signaling type

Types V

Far end Cross Talk (2W&4W)

-65 dB

Go-To-Return Cross Talk (4W)

-60 dB

Signaling Impedance

> 15 K ohm

Signaling Sensitivity

> 2.5 mA

Return Loss - 2W

300Hz600Hz >12dB, 600Hz3400Hz >15dB

Return Loss - 4W

300Hz3400Hz >20dB

Tx levels

4W: -11 dBm ~ +1 dBm (software-configurable with 1 dB granularity)


2W: 0 dBr 1 dB

Rx levels

4W: -11 dBm ~ -1 dBm (software-configurable with 1 dB granularity)


2W: -3.5 dBr 1 dB

ITU-T standards compliance

G.711 and G.712

Parent Topic
6.18 SM_10E Specifications

6.19.9 Codir_4E Interface


Maximum number of channels

4 (per module)

Impedance

120 ohm balanced

Standard Compliance

G.703-64 Kbps co-directional interface

Parent Topic
6.18 SM_10E Specifications

ECI Telecom Ltd. Proprietary

6-33

NPT Product Line System Specifications

NPT-1020 Specifications

6.19.10 OMNI_E Interface


Maximum number of 2W/4W channels

4 (per module)

Maximum number of conference groups

Maximum number of members in each conference


group

60

Parent Topic
6.18 SM_10E Specifications

6.19.11 V.24 Interface


Maximum number of
channels

8 in Transparent mode
4 in Asynchronous mode
2 in Synchronous mode

Bit rate

50 bps-19.2 Kbps in Transparent mode 0.6 Kbps, 1.2 Kbps, 2.4 Kbps,
4.8 Kbps, 9.6Kbps, 19.2 Kbps, 38.4Kbps,
57.6 Kbps (HCM) in Asynchronous mode
0.6 Kbps, 1.2 Kbps, 2.4 Kbps, 4.8 Kbps, 9.6Kbps, 19.2 Kbps, 38.4 Kbps,
57.6Kbps in HCM mode, 64 Kbps, in Synchronous mode

Modes of operation

Transparent, Asynchronous, Synchronous

Standards compliance

ITU-T V28, ITU-T V110, ITU-T V14

Parent Topic
6.18 SM_10E Specifications

6.19.12 V.35 Interface


Maximum number of channels 2 (per module)
Bit rate

N x 64 K (N = 131)
2Mb/s (Unframed)

Standards compliance

ITU-T V.28, ITU-T V.35

Parent Topic
6.18 SM_10E Specifications

ECI Telecom Ltd. Proprietary

6-34

NPT Product Line System Specifications

NPT-1020 Specifications

6.19.13 V.36 Interface


Maximum number of channels

2 (per module)

Bit rate

N x 64 K (N = 131)
2Mb/s (Unframed)

Standards compliance

ITU-T V.11, V.10, V.36

Parent Topic
6.18 SM_10E Specifications

6.19.14 V.11 Interface


Maximum number of channels 2 (per module)
Protocol

X.24, X.21

Bit rate

N x 64 K (N = 131)
2Mb/s (Unframed)

Standards compliance

ITU-T V11, X.24, X.21

Parent Topic
6.18 SM_10E Specifications

6.19.15 RS-422/449 Interface


Maximum number of channels 2 (per module)
Protocol

X.24, X.21

Bit rate

N x 64 K (N = 131)
2Mb/s (Unframed)

Standards compliance

EIA-449, TIA-422-B

Parent Topic
6.18 SM_10E Specifications

ECI Telecom Ltd. Proprietary

6-35

NPT Product Line System Specifications

NPT-1020 Specifications

6.19.16 SM_C37.94 Interface


Maximum number of channels

2 (per module)

Supported protocol

IEEE C37.94

Bandwidth

N x 64 Kbps, N=1 to 12

Optical interface wavelength

840 to 860 m

Supported fibers

50/62.5 m MMF

Optical interface rate

2048 Kbps

Tx and Rx fiber optic heads

850 nm multimode LED

Connectors type

BFOC/2.5 (ST)

Parent Topic
6.18 SM_10E Specifications

6.19.16.1 C37.94 Transceiver Specifications


Transmit optical power

-11~-23 dBm (50 m MMF), -11~-19 dBm (62.5 m MMF)

Receiver sensitivity

-11~-32 dBm

Parent Topic
6.18.16 SM_C37.94 Interface

6.19.17 SM_C37.94S Specifications


This section describes the specifications for SM_C37.94S

Parent Topic
6.18 SM_10E Specifications

6.19.17.1 General
Maximum number of channels per
module

Maximum number of channels per


card

Maximum number of channels per


shelf

18

Power consumption

3W

Parent Topic
6.18.17 SM_C37.94S Specifications

ECI Telecom Ltd. Proprietary

6-36

NPT Product Line System Specifications

NPT-1020 Specifications

6.19.17.2 C37.94S Interface


Supported protocol

IEEE C37.94

Bandwidth

N x 64 Kbps, N=1 to 12

Optical interface wavelength

760 to 860 nm

Fiber types

50/125 m MMF Multimode

Optical interface rate

2048 Kbps

Connectors type

LC (SFP based)

Parent Topic

6.18.17 SM_C37.94S Specifications

6.19.17.3 C37.94S SFP Based Transceiver Specifications


Transceiver form

SFP

Transmit optical power

-11~-23 dBm (50 m MMF), -11~-19 dBm (62.5 m MMF)

Receiver sensitivity

-11~ -32 dBm

Parent Topic
6.18.17 SM_C37.94S Specifications

6.19.18 SM_EoP
NOTE: The following is for SM_10E only
Interface type

10BaseT/100BaseT

Standards compliance IEEE802.3, IEEE802.3u G.704, G.7043 (PDH VCAT), G.8040 (GFP mapping into PDH)

Parent Topic
6.18 SM_10E Specifications

6.19.18.1 SM_EoP Ethernet Interface


Channels per module

Interface type

10BaseT/100BaseT

Bandwidth

N x 64 Kbps (N = 1-32) or 1-4 x E1

Encapsulation

HDLC for N x DS-0


GFP over PDH (G.8040) for N x E1

Virtual concatenation for N x E1 as per G.7043

VCAT over PDH

LCAS

Supported as per G.7042

Parent Topic
4.18.18 SM_EoP

ECI Telecom Ltd. Proprietary

6-37

NPT Product Line System Specifications

NPT-1020 Specifications

6.20 Physical Specifications


This section describes the physical specifications of the product.

Parent Topic

6 NPT-1020 Specifications

6.20.1 Dimensions (H x W x D)
NPT-1020/NPT-1021 shelf 44.4 mm x 440 mm x 243 mm
INF-B1U

20 mm x 76 mm x 222 mm

INF-B1U-D

40 mm x 76 mm x 222 mm

AC_PS-B1U

40 mm x 76 mm x 222 mm

EXT-2U shelf

88.9 mm x 443.4 mm x 243 mm

EXT-2U shelf traffic card

26 mm x 283 mm x 222 mm

INF-E2U

26 mm x 111 mm x 222 mm

AC_PS-E2U

52 mm x 111 mm x 222 mm

FCU-E2U

85 mm x 40 mm x 222 mm

Racks

2200/2600 mm x 600 mm x 300 mm

Parent Topic

6.19 Physical Specifications

6.20.2 Weight
NPT-1020/NPT-1021 fully populated

4.5 kg

EXT-2U fully populated

7.5 kg

Parent Topic

6.19 Physical Specifications

6.20.3 Power
Applicable specification

ETSI 300 132-2

Input DC voltage

-40 VDC to -72 VDC

Nominal DC power source

-48 VDC

Input AC voltage

110 VAC to 230 VAC; 50 Hz/60 Hz

Nominal AC power source

220 VAC or 110 VAC

NPT-1020/NPT-1021 power consumption

Maximum 200 W

EXT-2U power consumption

Maximum 511 W (Including PoE)

Parent Topic

6.19 Physical Specifications


ECI Telecom Ltd. Proprietary

6-38

NPT Product Line System Specifications

NPT-1020 Specifications

6.20.4 AC_PS-B1U Module


AC input voltage range

110 VAC to 230 VAC; 50 Hz/60 Hz

DC output voltage

-48 VDC to -70 VDC

Maximum output load power


(220VAC)

180 W

Maximum output load power


(110VAC)

130 W

Working temperature

-5 C to +55 C

Storage temperature range

-40 C to +70 C

Parent Topic
6.19 Physical Specifications

6.20.5 AC_PS-E2U
AC input voltage range

100 VAC to 240 VAC; 50 Hz/60 Hz

DC output voltage

-48 VDC to -70 VDC

Maximum output load power

200 W

Working temperature

-5 C to +55 C

Storage temperature range

-40 C to +70 C

Parent Topic
6.19 Physical Specifications

6.20.6 INF-B1U Module


DC input voltage

-48 VDC to -70 VDC

Maximum output load power

241 W

Working temperature

-25 C to +70 C

Storage temperature range

-40 C to +70 C

Parent Topic

6.19 Physical Specifications

6.20.7 INF-B1U-D Module


DC input voltage

-48 VDC to -70 VDC

Maximum output load power

240 W

Working temperature

-25 C to +70 C

Storage temperature range

-40 C to +70 C

Parent Topic

6.19 Physical Specifications


ECI Telecom Ltd. Proprietary

6-39

NPT Product Line System Specifications

NPT-1020 Specifications

6.20.8 NPT-1020 Power Consumption


Type

Component name

Commons

NPT-1020 shelf with fans

60.5 W

CPS50

48.2 W

INF-B1U

8.7 W

INF-B1U-D

10 W

PME1_21

7.7 W

PME1_63

14.6 W

PM345_3

4.8 W

SMD1B

6.2 W

SMS4

5.8 W

DMCES1_4

25 W

Tslot modules

Expansion unit

Expansion cards

MSE1_16

12.9 W

EXT-2U shelf with fans

18.7 W

INF_E2U

15 W

FCU_E2U

18.7 W

PE1_63

16.7 W

P345_3E

8.8 W

S1_4

11.6 W

DMCE1_32

21.6 W

MPoE_12G

43.5 W

Optical base card (OBC)

OBC modules
ECI Telecom Ltd. Proprietary

Power requirements

8W

SM_10E base card

6.8 W

EM_10E base card

13.1 W

DHFE_12

12 W

DHFX_12

20.5 W

MXP10

38.2 W

OM_AOC4

5W

OM_BA

11 W
6-40

NPT Product Line System Specifications

Type

SM_10E/EM_10E modules

SFP transceivers

ECI Telecom Ltd. Proprietary

Component name

NPT-1020 Specifications

Power requirements

OM_PA

10 W

OM_ILA

18 W

SM_FXS_8E

1 W (all idle)
10 W (all busy)

SM_FXO_8E

1 W (all idle)
2.5 W (all busy)

SM_EM_24W_6E

1 W (all idle)
2.8 W (all busy)

SM_V24E

0.8 W (all idle)


3.2 W (all busy)

SM_V35E (SM_10E only)

0.8 W (all idle)


1.9 W (all busy)

SM_V35_V11

1.5 W (2 x V.35)
3.5 W (2 x V.11)

SM_CODIR_4E

0.8 W (all idle)


1.8 W (all busy)

SM_OMNI_E

1.5 W

SM_EOP (SM_10E only)

8.1 W

SM_C37.94

3W

SM_C37.94S

3W

OTR1_YY

1W

OTR4_YY

1W

OTR16_YY

1W

OTR25_xx

1.5 W

OTC25_ALxx

1.6 W

OTC25_PSxx

1.6 W

OTFE_SM

1W

OTFE_MM

1W

OTGBE_SX

1W

OTGBE_LX

1W

OTGBE_ZX

1W

6-41

NPT Product Line System Specifications

Type

Component name
ETGBE

SFP+

NPT-1020 Specifications

Power requirements
1W

OTP10_SR

0.9 W

OTP10_LR

0.9 W

OTP10_ZR

1.5 W

OTP10_LRM

1W

OTP10C_xx

1.5 W

OTP10D_xx

1.5 W

OTP10_xxBD

1.5 W

OTP10T_AL

1.5 W

OTP10T_17

1.7 W

Parent Topic
6.19 Physical Specifications

6.20.9 Environmental Conditions


NOTE:

Extended temperature range of -25 C to +70 C is supported. However, before


installing the NPT-1020 in a street cabinet, consult the PLM at ECI.

Parent Topic
6.19 Physical Specifications

6.20.9.1 Operation
Applicable specification

ETSI-300-019-2-3 Class 3.3

Temperature range

-25C to +70C

Relative humidity

5% to 95%

Parent Topic
6.19.9 Environmental Conditions

ECI Telecom Ltd. Proprietary

6-42

NPT Product Line System Specifications

NPT-1020 Specifications

6.20.9.2 Storage (Packed)


Applicable specification

ETS-300-019-2-1 Class 1.2

Temperature range

-40C to +70C

Relative humidity

10% to 100%

Parent Topic
6.19.9 Environmental Conditions

6.20.9.3 Handling and Transportation


Applicable specification

ETS-300-019-2-2 Class 2.2

Temperature range

-40C to +70C

Relative humidity

up to 95%

Parent Topic
6.19.9 Environmental Conditions

6.20.10 EMC
Applicable specifications

EN 300 386/2000

Applicable directive

EMC directive 89/336 EEC

Parent Topic
6.19 Physical Specifications

6.20.11 Safety
Applicable specifications

EN 60950/2000

Applicable CE directive

LVD directive 73/23/EEC

Parent Topic
6.19 Physical Specifications

6.20.12 Laser Safety


Applicable specification

IEC 60825-1&2 (AS/NZS 2211.2)

Parent Topic
6.19 Physical Specifications

ECI Telecom Ltd. Proprietary

6-43

NPT Product Line System Specifications

NPT-1020 Specifications

6.20.13 Reliability
This section describes the reliability of the NPT-1010 platform with respect to product life and availability.

Parent Topic
6.19 Physical Specifications

6.20.13.1 Life
Expected lifetime of the NPT-1020

15 years

Parent Topic
6.19.13 Reliability

6.20.13.2 Availability
Availability of service for an end-to-end service
trail passing through a protected SDH network

better than 99.999%

Parent Topic
6.19.13 Reliability

ECI Telecom Ltd. Proprietary

6-44

NPT-1010 Specifications

7.1

NPT-1010 Shelf Capacity

The NPT-1010 is designed around a centralized packet switch that supports any to any direct data card
connectivity. The NPT-1010 offers a packet switching capacity of up to 5 Gbps mainly for business CPE and
micro cell sites.

Parent Topic
7 NPT-1010 Specifications

7.2

Cross-Connect Specifications

This section describes the cross-connect specifications for the NPT-1021.

Parent Topic
7 NPT-1010 Specifications

7.3

Switching Specifications

Switching capacity

5 Gbps

MPLS processing (IMIX)

5 Gbps

Parent Topic
7 NPT-1010 Specifications

7.4

Redundancy

DC power system

Dual power feeding 1+1 redundancy

Parent Topic
7 NPT-1010 Specifications

7.5

Synchronization

Three types of timing references available from packet multiple timing sources:

From any GbE port that supports synchronous Ethernet

1588v2 PTP Ordinary Clock

Synchronization Status Message (SSM) support is provided

Parent Topic
7 NPT-1010 Specifications
ECI Telecom Ltd. Proprietary

7-1

NPT Product Line System Specifications

7.6

NPT-1010 Specifications

Throughput Test - RFC2544

Number of RFC2544 test port

Max test rate

100Mbps

Test rate granularity

64Kbps~960Kbps@64Kbps, 1Mbps~Max rate@100Kbps

Transmit frame size

Fixed (64~1522B)
IMIX

IMIX types

Standard IMIX
G.8261 IMIX1
G.8261 IMIX2
User defined IMIX

Performance test

Frame loss (Latency and jitter test is not supported)

7.7

Traffic Protection

ERPS

within 50 ms

LSP 1:1 linear protection

within 50 ms

FRR and dual FRR

within 50 ms

LAG 1:1

Within 50 ms (Static)
Within 100ms (LACP)

Parent Topic
7 NPT-1010 Specifications

7.8

Jitter and Wander

Applicable specifications ITU T G.823, G.825

Parent Topic
7 NPT-1010 Specifications

7.9

I/O Interfaces

This section describes the specifications for the I/O interfaces.

Parent Topic
7 NPT-1010 Specifications

ECI Telecom Ltd. Proprietary

7-2

NPT Product Line System Specifications

NPT-1010 Specifications

7.9.1 2.048 Mbps (E1)


Physical level

G.703, Paragraph 6/s 50ppm

Frame options

Unframed, framed (ITU-T G.704)

Line code

HDB3

Line impedance

120 balanced 5%

Parent Topic
7.8 I/O Interfaces

7.9.2 1.544 Mbps (T1)


Physical level

ANSI T1.403-1999

Frame options

Unframed, framed (ANSI T1.107-2002 [R2006])

Line code

AMI/B8ZS

Line impedance

100 balanced

Parent Topic
7.8 I/O Interfaces

7.10 Management
Applicable specifications

G.784, G.774, M.3010, M.3100

LightSoft (ECI Telecom Network


Manager) server and client for
managing all ECI Telecom
equipment

on SUN workstation(s)

EMS-APT (element manager)

on PC or SUN workstation(s)

LCT-APT (local craft terminal)

on PC

Parent Topic
7 NPT-1010 Specifications

7.10.1 Management and Alarm Interfaces


CMIP-like over TCP/IP to EMS-APT
SNMP V3 to third-party SNMP-based management solution (monitoring only)
MTNM from EMS-APT to LightSoft or other TMN
10/100BaseT to LCT-APT
Rack Alarm Panel

Parent Topic
7.9 Management
ECI Telecom Ltd. Proprietary

7-3

NPT Product Line System Specifications

NPT-1010 Specifications

7.10.2 Management Communication Channel


MCC Interfaces

Management LAN interface for DCN


In-band MCC for Ethernet/MPLS network

IP & Routing protocol

IPv4
OSPFv2

Interface types

Numbered, unnumbered

Link Layer Encapsulation

IEEE 802.3 Ethernet For management port or in-band MCC


IEEE 802.1q For in-band MCC
IEEE 802.1ad For in-band MCC

In-band MCC interfaces

MCC over MoE (IP over Ethernet)


MCC over single PB port
Management VLAN

In-band MCC processing capacity

3 Mbps

Maximum number of MCC channels

MCC bandwidth per interface

256 Kbps~4 Mbps@ 256Kbps

Parent Topic
7.9 Management

7.10.3 Alarms and Performance


Performance concept

ITU-T G.821, G.826, Bellcore GR-820-CORE

Alarm concept

G.783

Alarm types

LED indicators, dry contacts,


(per subrack), external alarm inputs and outputs

Alarm classes

Critical, Major, Minor, Warning

Parent Topic
7.9 Management

7.11 Ethernet Specifications


This section describes the Ethernet specifications for the NPT-1021.

Parent Topic
7 NPT-1010 Specifications

ECI Telecom Ltd. Proprietary

7-4

NPT Product Line System Specifications

NPT-1010 Specifications

7.11.1 NPT-1010
Interfaces

4 x 100/1000Base-X (with optical SFP)


4 x 10/100/1000Base-T

Number of PoE ports

4 x 10/100/1000Base-T

PoE PSE pin-out

IEEE 802.3af, Alternative A

Supported PD type

IEEE 802.3at type 1, type 2

Maximum PoE power per port

30 W

Number of Sync-E ports

8 (all ports)

Supported types of 1588v2 PTP Clock

OC (slave) with TMSE1_8 or TM10


two-step TC

Switch capacity

5 Gbps

MAC address table capacity

64 K

MAC address table capacity per VSI

32 K

MAC learning rate

1.44M MACs/sec

Supported VLAN quantity

512*4094, as per IEEE 802.1ad

Supported C-VLAN groups

8000

Supported MPLS P2P tunnel queues

2000

Supported Bidirectional LSPs

256

Maximum number of LSP1:1 Linear


Protection Domains

128

Supported MPLS P2MP tunnels

Supported maximum PWs

4000

Supported maximum VSIs

512

Supported maximum policers

512

Supported maximum policer profiles

128

Sync-E

8 GbE ports

CIR/EIR granularity of policer

64Kb/s (0~2Mb/s)
1Mb/s (2Mb/s~full port rate)

CIR granularity of high CoS Shaper

128K~512Kbps@128Kbps
1~16Mbps@1Mbps
16~64Mbps@2Mbps
64~256Mbps@4Mbps
256~1280Mbps@8Mbps

CIR granularity of low CoS bandwidth

128K~512Kbps@128Kbps
1~16Mbps@1Mbps
16~64Mbps@2Mbps
64~256Mbps@4Mbps
256~1280Mbps@8Mbps

PIR granularity of E-LSP bandwidth

1~No rate limit@1Mb/s

ECI Telecom Ltd. Proprietary

7-5

NPT Product Line System Specifications

Maximum sites per VPLS instance

NPT-1010 Specifications

255-number of UNI/NNI

Maximum number of UNI/NNI ports per VSI 8


Queues in each egress port

MSTP/ERPS instance number

32

Supported maximum multicast groups per


Rooted MP leaf VSI

1024

LAG support

up to 4 LAGs with up to 8 port members per LAG

Supported BFD intervals

3.33 msec, 10 msec, 100 msec, 1000 msec

Maximum number of BFD sessions

600

Maximum number of BFD sessions over


Bidirectional LSP

500

Maximum number of BFD sessions for


section

Maximum number of ports (8)

Maximum number of BFD templates

10

Supported CFM intervals

3.33 msec, 10 msec, 100 msec


1 sec,10 sec, 60 sec, 600 sec (slow)

Maximum number of 3.33 msec/10


msec/100 msec/1000 msec CCM sessions

500

Maximum aggregated packet rate for slow


CCM (1 sec/10 sec/1 min/10 min)

200 pps

Total number of 3.33 msec BFD and CCM


sessions

<=100

Total number of 10 msec/100 msec CCM


and 10 msec/100 msec/1000 msec BFD
sessions

<=500

Standards compliance

IEEE802.1p, IEEE802.1Q, IEEE802.1ad,


IEEE802.1w, IEEE802.1s, IEEE802.1ag
IEEE802.3, IEEE802.3x, IEEE802.3ad, IEEE802.3ah,
IEEE802.3u, IEEE802.3z
RFC3031, RFC3032, RFC3916, RFC3985, RFC4090
RFC5586, RFC5654, RFC5880, RFC5921, RFC6428, RFC6378,
RFC6427,RFC2544 (up to 1G)
ITU-T Y.1710, Y.1711, Y.1731,
G.707, G.783, G.7041 (GFP), G.7042 (LCAS), G.8032
MEF9, MEF10, MEF14

Parent Topic

7.10 Ethernet Specifications

ECI Telecom Ltd. Proprietary

7-6

NPT Product Line System Specifications

NPT-1010 Specifications

7.11.2 TMSE1_8
Interfaces

8 x E1/T1

CES service

Unstructured E1/T1 (SAToP)


Channelized E1/T1 (CESoPSN)

Number of CES services

Encapsulation Protocol

CESoETH, CESoMPLS

CES clock recovery mechanism

Adaptive
Differential

Reference clock frequency for DCR


RTP timestamp

19.44 MHz
25 MHz

Adaptive timing domain

Differential timing domain

Tx Timing mode

Recovered from CES stream


System timing
Loop timing

Payload time

125~8000us@125us

Jitter buffer Max delay var

1000-64000 @1000 sec

Jitter buffer Min latency

500-32000 @500 sec

Standards compliance

IEFT RFC4553, RFC5086


MEF8, MEF3
ITU-T Y.1413, G.703

Parent Topic
7.10 Ethernet Specifications

7.11.3 TM10 (1588v2 Specifications)


Supported types of 1588v2 PTP Clock

1 x OC slave

Type of PTP clock interface

1 x 1PPS
1 x ToD

Connector type of 1PPS and ToD interface

RJ-45

Electrical characteristic of 1PPS and ToD interface

RS-422/V.11

PTP message encapsulation

UDP/IPv4

ToD message format

GPRMC

Standards compliance

IEEE 1588v2

Parent Topic
7.10 Ethernet Specifications

ECI Telecom Ltd. Proprietary

7-7

NPT Product Line System Specifications

NPT-1010 Specifications

7.11.4 Ethernet Transceivers


Table 7-1: GbE/FX client transceivers

Transmitter type

OTGBE_SX

OTGBE_LX

OTGBE_ZX

OTGBE_EX

OTFE_MM

OTFE_SM

GbE/FC1/

GbE/FC1/FICON(2)
long-reach laser,
1310 nm, single
mode

GbE/FC1/

GbE/FC1/

FICON(2) very
long-reach laser,
1550 nm, single
mode

FICON(2) very
long-reach
laser, 1550 nm,
single mode

FX, short-reach
laser, 1310
multimode

FX, short-reach
laser, 1310 nm,
single mode

1.0625/1.25

0.125

0.125

FICON(2)
short-reach
laser, 850 nm,
multimode
Data rate (nominal)
(Gbps)

1.0625/1.25/

1.0625/1.25/

1.0625/1.25/

2.125

2.125

2.125

Max.

-3

-3

-15

-8

Min.

-9

-11

-5

-20

-15

Min. transmitter
extinction ratio (dB)

10

8.2

Data format

8B/10B

8B/10B

8B/10B

8B/10B

N/A

N/A

-20

-22

-22

-24

-31

-28

-25.5

--

--

-30

--

Average launch
power (dBm)

Average receiver
sensitivity (dBm)

Min.

Typical -21
Max. receiver
overload (dBm)

-14

-8

Typical Rx LOS level


(dBm)

-24

-29

-25

-25

< -33

< -28

Connector

LC

LC

LC

LC

LC

LC

Fiber lengths

550 m

10 km

80 km

40 km

2000 m

10 km

(50/62.5 m
MMF)

(9 m SMF)

(9 m SMF)

(9 m SMF)

(50/62.5 m
MMF)

(9 m SMF)

Table 7-2: GbE bidirectional client transceivers


OTGBE_S3BD

OTGBE_S5BD

OTGBE_L3BD

OTGBE_L5BD

OTGBE_L5BD80

OTGBE_L6BD8
0

Transmitter type

Bidirectional SFP,
1310 nm

Bidirectional SFP,
1490 nm

Bidirectional SFP,
1310 nm e

Bidirectional SFP,
1490 nm

Bidirectional SFP,
1490 nm

Bidirectional
SFP, 1590 nm

Data rate (nominal)


(MBaud)

1250

1250

1250

1250

1250

1250

Average launch
power (dBm)

-3 Max.

-3

+2

+2

+4

+4

-10 Min.

-10

-5

-5

-2

-2

Min. transmitter
>9
extinction ratio (dB)

>9

>9

>9

Data format

8B/10B

8B/10B

8B/10B

8B/10B

8B/10B

8B/10B

ECI Telecom Ltd. Proprietary

7-8

NPT Product Line System Specifications

NPT-1010 Specifications

Average receiver
sensitivity (dBm)

< -21

< -21

< -23

< -23

-26

-26

Min. overload (dB)

-3

-3

-3

-3

-3

-3

Typical Rx LOS level


(dBm)

< -22

< -22

< -24

< -24

< -26

< -26

Connector

LC

LC

LC

LC

LC

LC

Fiber lengths

10 km
(9 m SMF)

10 km
(9 m SMF)

40 km
(9 m SMF)

40 km
(9 m SMF)

80 km
(9 m SMF)

80 km
(9 m SMF)

Parent Topic
7.10 Ethernet Specifications

7.11.5 CWDM and DWDM STM-16/GbE (2488 Mbps 4.6


ppm)
Table 7-3: CWDM and DWDM STM-16/GbE transceivers
CWDM

DWDM

SFP TRANSCEIVER NAME135

OTC25_PSxx

OTC25_1ALxx

OTR25_AVxx

OTR25_ABxx

APPLICATION CODE136

S-C8S1-1D2/5

S-C8L1-1D2/5

G.695

G.695

DW100L\--1D2/5(C)F
DW100C\--1A2/5(C)F

DW100L\--1D2/5(C)F
DW100C\--1A2/5(C)F

G.698.1/.2

G.698.1/.2

1464-1618

1464-1618

1530-1565

1530-1565

Source type

SLM

SLM

SLM

SLM

Max. -20 dB width (nm)

0.4

0.4

Max. RMS width (nm)

Min. side mode suppression (dB)

30

30

30

30

Min. mean launched power (dBm)

Max. mean launched power (dBm)

+5

+5

Min. extinction ratio (dB)

8.2

8.2

8.2

8.2

Min. sensitivity (BER of 1*10-12) EOL (dBm)

-21.5
(-23 GbE)

-28
(-32 GbE)

-28

-28

Min. overload (dBm)

-7

-9

-9

Max. receiver reflectance (dB)

-27

-27

-27

-27

Operating wavelength (nm)


TRANSMITTER

RECEIVER

135

New optical SFP transceivers for existing SIO16 basecard.

136

Application code is in reference to ITU-T Recommendation G.691.

ECI Telecom Ltd. Proprietary

7-9

NPT Product Line System Specifications

NPT-1010 Specifications

CWDM
SFP TRANSCEIVER NAME135

DWDM

OTC25_PSxx

OTC25_1ALxx

OTR25_AVxx

OTR25_ABxx

Max. dispersion [ps/nm]

800
(40 km G.652)

1600
(80 km G.652)

2400
(120 km G.652)

3600
(180 km G.652)

Min. optical return loss of cable (dB)

24

24

-24

-24

Max. discrete reflectance (dB)

-27

-27

-27

-27

Max. optical path penalty (dB)

1.5

2.5

<3

<2

OPTICAL PATH BETWEEN S & R

Parent Topic
7.10 Ethernet Specifications

7.11.6 Electrical GbE SFP (ETGbE)


ETGBE

Notes

Data rate

10/100/1000 Mbps

IEEE 802.3 compatible

Connector

RJ-45

Cable type

CAT 5

Cable length

100m

Parent Topic
7.10 Ethernet Specifications

7.12 Physical Specifications


This section describes the physical specifications of the product.

Parent Topic
7 NPT-1010 Specifications

7.13 Dimensions (H x W x D)
NPT-1010 shelf

44.4 mm x 223.5 mm x 224 mm

Racks

2200/2600 mm x 600 mm x 300 mm

Parent Topic
7 NPT-1010 Specifications

ECI Telecom Ltd. Proprietary

7-10

NPT Product Line System Specifications

NPT-1010 Specifications

7.14 INF_E2U
DC output voltage

-48 VDC to -70 VDC

Maximum output load power 511 W (including PoE)


Working temperature

-25 C to +70 C

Storage temperature range

-40 C to +70 C

Parent Topic
7 NPT-1010 Specifications

7.15 Weight
NPT-1010

2.5 kg

Parent Topic
7 NPT-1010 Specifications

7.16 Power
Applicable specification

ETSI 300 132-2

Input DC voltage

-40 VDC to -72 VDC

Nominal DC power source

-48 VDC or -60 VDC

Input AC voltage

110 VAC to 230 VAC; 50 Hz/60 Hz

Nominal AC power source

220 VAC or 110 VAC

NPT-1010_DC power consumption

Maximum 160 W (including PoE)

NPT-1010_AC power consumption

Maximum 120 W (Including PoE)

Parent Topic
7 NPT-1010 Specifications

7.17 NPT-1010 Power Consumption


Type

Component name

Commons

NPT-1010_DC shelf with fans


(excluding PoE)

28 W

NPT-1010_AC shelf with fans


(excluding PoE)

41 W

TMSE1_8

9.8 W

TM10

3.6 W

Mslot modules

ECI Telecom Ltd. Proprietary

Power requirements

7-11

NPT Product Line System Specifications

NPT-1010 Specifications

Parent Topic
7 NPT-1010 Specifications

7.18 Environmental Conditions


NOTE:

Extended temperature range of -25 C to +70 C is supported. However, before


installing the NPT-1010 in a street cabinet, consult the PLM at ECI.

Parent Topic
7 NPT-1010 Specifications

7.18.1 Operation
Applicable specification

ETSI-300-019-2-3 Class 3.3

Temperature range

-25C to +70C

Relative humidity

5% to 95%

Parent Topic
7.17 Environmental Conditions

7.18.2 Storage (Packed)


Applicable specification

ETS-300-019-2-1 Class 1.2

Temperature range

-40C to +70C

Relative humidity

10% to 100%

Parent Topic
7.17 Environmental Conditions

7.18.3 Handling and Transportation


Applicable specification

ETS-300-019-2-2 Class 2.2

Temperature range

-40C to +70C

Relative humidity

up to 95%

Parent Topic
7.17 Environmental Conditions

ECI Telecom Ltd. Proprietary

7-12

NPT Product Line System Specifications

NPT-1010 Specifications

7.19 EMC
Applicable specifications

EN 300 386/2000

Applicable directive

EMC directive 89/336 EEC

Parent Topic
7 NPT-1010 Specifications

7.20 Safety
Applicable specifications

EN 60950/2000

Applicable CE directive

LVD directive 73/23/EEC

Parent Topic
7 NPT-1010 Specifications

7.21 Laser Safety


Applicable specification

IEC 60825-1&2 (AS/NZS 2211.2)

Parent Topic
7 NPT-1010 Specifications

7.22 Reliability
This section describes the reliability of the NPT-1010 platform with respect to product life and availability.

Parent Topic
7 NPT-1010 Specifications

7.22.1 Life
Expected lifetime of the NPT-1010

15 years

Parent Topic
7.21 Reliability

7.22.2 Availability
Availability of service for an end-to-end service
trail passing through a protected SDH network

ECI Telecom Ltd. Proprietary

better than 99.999%

7-13

NPT Product Line System Specifications

NPT-1010 Specifications

Parent Topic
7.21 Reliability

ECI Telecom Ltd. Proprietary

7-14

Standards and References

The following is a list of standards and reference documents that relate to the NPT platform product line.
The standards are listed alphabetically by groups.

8.1

Broadband Forum

Af-phy-0064.000 ATM Forum E1 Physical Layer Interface.

Af-phy-0086.000 ATM Forum IMA V1.0.

Af-phy-0086.001 ATM Forum IMA V1.1.

Af-phy-00121.00 ATM Forum Traffic Management Specifications V4.1.

Parent Topic
8 Standards and References

8.2

Environmental Standards

EuP Directive 2005/32/EC: Ecodesign Requirements for Energy-Using Products.

OHSAS 18001: Occupational Health and Safety Management Systems - Requirements.

REACh Directive 2005/32/EC: Registration, Evaluation, Authorization, and Restriction of Chemicals.

RoHS Directive 2005/747/EC: Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment.

WEEE Directive 2002/96/EC: Waste from Electrical and Electronic Equipment.

Parent Topic
8 Standards and References

8.3

ETSI: European Telecommunications


Standards Institute

EN 300 019-1-1 Class 1.2: Environmental Engineering (EE); Environmental Conditions and
Environmental Tests for Telecommunications Equipment; Part 1-1: Classification of Environmental
Conditions; Storage.

EN 300 019-1-2 Class 2.3: Environmental Engineering (EE); Environmental Conditions and
Environmental Tests for Telecommunications Equipment; Part 1-2: Classification of Environmental
Conditions; Transportation.

EN 300 019-1-3 Classes 3.2 and 3.3: Environmental Engineering (EE); Environmental Conditions and
Environmental Tests for Telecommunications Equipment; Part 1-3: Classification of Environmental
Conditions; Stationary use at weather-protected locations.

EN 300 019-2-4 Class 4.1: Environmental Engineering (EE); Environmental Conditions and
Environmental Tests for Telecommunications Equipment; Part 2-4: Specification of Environmental
Tests; Stationary use at non-weather-protected locations.

ECI Telecom Ltd. Proprietary

8-1

NPT Product Line System Specifications

Standards and References

EN 300 132 -2: Environmental Engineering (EE); Power Supply Interface at the Input to
Telecommunications Equipment.

EN 300-166: Physical and electrical characteristics of hierarchical digital interfaces for equipment
using the 2 048 kbit/s based plesiochronous or synchronous digital hierarchies.

EN 300 386: Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication
network equipment; Electromagnetic Compatibility (EMC) requirements.

EN 300-417-2-1: Transmission and Multiplexing (TM); Generic requirements of transport functionality


of equipment.

EN 300-417-5-1: Generic requirements of transport functionality of equipment.

EN 300-462-5-1: Transmission and Multiplexing (TM); Generic requirements for synchronization


networks.

EN 300-689: 34 Mbit/s digital leased lines (D34U and D34S); Terminal equipment interface.

EN 301-164: SDH leased lines connection characteristics.

EN 301-165: SDH leased lines Network and Terminal interface presentation.

EN 50121 4 (2006) Railway applications - Electromagnetic compatibility part 4: emission and


immunity of signaling and telecommunications.

EN 50125-3 (2003) Railways applications Environmental conditions for equipment part 3:


Equipment for signaling and telecommunication.

EN50581 - Guiding Standard for Compliance with RoHS2 Technical Documentation Requirements

EN 55022: Radio Disturbance Characteristics of Information Technology Equipment.

EN 55024: 1998 +A1: 2001+A2:2003 Immunity characteristics-Limits and methods of measurements

EN 60950-1 (2006/ A11+A12+A1)) Equipment Safety Part-1: General Requirements.

EN 60870-2-2 (1996) Telecontrol equipment and system - Part 2Operation condition Section 2:
Environmental condition (3k6).

EN 60950-1 -Information Technology Equipment Safety- Part1 General Requirements

EN 61000-4-2:1995 +A1:98+A2:2001 Electrostatic Discharge (ESD) Immunity test

EN 61000-4-3:2008 Electromagnetic compatibility


frequency,electromagnetic field immunity IEC test

EN 61000-4-4: 2008 Electromagnetic compatibility (EMC), Section 4: Electrical fast transient/burst


immunity test

EN 61000-4-5: 2006 Electromagnetic compatibility (EMC), Section 5: Surge immunity test

EN 61000-4-6:2007 Electromagnetic compatibility (EMC), Section 6: Immunity to conducted


disturbances, induced by radio- frequency fields

EN 61000-6-5 (2001) Generic standards Immunity for power station and substation environments

EN 61850-3 (2002) Communication network and systems in substations Part 3: General


requirements

ETR 114: Functional Architecture of SDH Transport Networks.

ETR 275: Considerations on Transmission Delay and Transmission Delay value for components on
connections supporting speech communication over evolving digital networks.

ECI Telecom Ltd. Proprietary

(EMC),

Section

3:

Radiated,

radio

8-2

NPT Product Line System Specifications

Standards and References

FTZ 1TR9: Deutsche Telekom A.G. EMC Requirements.

FTZ 153 TL 1part 1: Synchronous Multiplexing Equipment (SM) for Synchronous Multiplex Hierarchy.

Parent Topic
8 Standards and References

8.4

IEC: International Electrotechnical


Commission

IEC 68: Environmental Testing.

IEC-68-2-6: Vibration and Shock tests on a typical Current Transformer Set.

IEC 870-2-1:1995 Telecontrol equipment and systems - Part 2: Operating conditions -Section 1: Power
supply and electromagnetic compatibility.

IEC 917: Modular Order for the Development of Mechanical Structures for Electronic Equipment
Practices.

IEC 3309: Information Technology Telecommunications and Information Exchange between Systems
High-Level Data Link Control (HDLC) Procedures Frame Structure.

IEC 9314-3: Information Processing Systems - Fiber Distributed Data Interface (FDDI) Multiplex.

IEC 9595, Information Technology: Open Systems Interconnection, Common Management


Information Services.

IEC 9596, Information Technology: Open Systems Interconnection, Common Management


Information Protocol.

IEC 13239: Information technology Telecommunications and information exchange between


systems High-level data link control (HDLC) procedures.

IEC 17025: General Requirements for Competence of Testing and Calibration Laboratories.

IEC 60825-1: Safety of Laser Products Part 1: Equipment Classification and Requirements.

IEC 60825-2 (AS/NZS 2211.2): Safety of Laser Products Part 2: Safety of Optical Fiber Communication
System (OFCS).

IEC/EN/UL 60950-1: Information Technology Equipment - Safety - General Requirements.

IS 1249-1: Safety of Laser products: Equipment classification requirements and users guide.

Parent Topic
8 Standards and References

ECI Telecom Ltd. Proprietary

8-3

NPT Product Line System Specifications

8.5

Standards and References

IEEE: Institute of Electrical and Electronic


Engineers

IEEE 802.1ad: Virtual Bridged Local Area NetworksRevisionAmendment 4: Provider Bridges.

IEEE 802.1ag: Virtual Bridged Local Area Networks Amendment 5: Connectivity Fault Management.

IEEE 802.1D: Media access control (MAC) Bridges (Incorporates IEEE 802.1t and IEEE 802.1w).

IEEE 802.1P: Traffic Class Expediting and Dynamic Multicast Filtering.

IEEE 802.1Q: Virtual Bridged Local Area NetworksRevision.

IEEE 802.1w: Rapid Reconfiguration of Spanning Tree.

IEEE 802.1s: Multiple Spaning Trees

IEEE 802.3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and
Physical Layer Specifications.

IEEE 802.3ad: Link Aggregation.

IEEE 802.3ah: Ethernet in the First Mile (Link OAM).

IEEE 802.3x: Full Duplex Operation and Flow Control Protocol.

IEEE 802.1x: Port-based Network Access Control (PNAC)

IEEE C37.94: IEEE Standard for N Times 64 Kilobit Per Second Optical Fiber Interfaces Between
Teleprotection and Multiplexer Equipment

IEEE 1588: IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement
and Control Systems

IEEE 1613 (2003) Environmental and testing requirements for communication networking devices in
electric power station (class B).

Parent Topic
8 Standards and References

8.6

IETF: Internet Engineering Task Force

RFC 791: Internet Protocol, DARPA Internet Protocol Specification

RFC 826: An Ethernet Address Resolution Protocol

RFC 894: A Standard for the Transmission of IP Datagrams over Ethernet Networks

RFC 1122: Requirements for Internet Hosts -- Communication Layers, Braden R.,Editor, October 1989

RFC 1157: SNMP - Simple Network Management Protocol.

RFC 1213: Management Information Base for Network Management of TCP/IP-based internets:MIB-II,
March 1991

RFC 1332: The PPP Internet Protocol Control Protocol (IPCP), May 1992

RFC 1570: PPP LCP Extensions, W.Simpson, January 1994

RFC 1661: The Point-to-Point Protocol (PPP), July 1994

ECI Telecom Ltd. Proprietary

8-4

NPT Product Line System Specifications

Standards and References

RFC 1662: PPP in HDLC-like framing, July 1994

RFC 1812: Requirements for IP version 4 Routers, June 1995

RFC 1850: OSPF Version 2 Management Information Base, Baker F., R. Coltun R., November 1995

RFC 2328: OSPF Version 2., Moy J., April 1998

RFC 1493: Definition of Managed Objects for Bridges.

RFC 1643: Ethernet-like Interfaces.

RFC 1662: PPP in HDLC-Life Framing.

RFC 1757: Remote Network Monitoring Management Information Base.

RFC 1823: LDAP Application Program Interface (API).

RFC 1901: Introduction to Community-based SNMPv2.

RFC 2108: Definitions of Managed Objects for IEEE 802.3 Repeater Devices using SMIv2.

RFC 2251: Lightweight Directory Access Protocol (v3) [specification of the LDAP on-the-wire protocol].

RFC 2252: Lightweight Directory Access Protocol (v3): Attribute Syntax Definitions.

RFC 2253: Lightweight Directory Access Protocol (v3): UTF-8 String Representation of Distinguished
Names.

RFC 2254: The String Representation of LDAP Search Filters.

RFC 2255: The LDAP URL Format.

RFC 2256: A Summary of the X.500(96) User Schema for use with LDAPv3.

RFC2236, "Internet Group Management Protocol, Version2".

RFC 2401: Security Architecture for the Internet Protocol.

RFC 2409: Internet Key Exchange Protocol (IKE).

RFC 2464: Transmission of IPv6 Packets over Ethernet Networks.

RFC 2474: Definition of the Differentiated Services Field (DS Field) in the IPv4 and IPv6 Headers.

RFC 2544: Throughput test generator.

RFC 2597: Assured Forwarding PHB Group.

RFC 2615: PPP over SONET/SDH.

RFC 2665: Definitions of Managed Objects for the Ethernet-like Interface Types.

RFC 2674: Bridge MIB with VLAN/Traffic Classes/Multicast Extensions.

RFC 2702: Requirements for Traffic Engineering Over MPLS.

RFC 2737: Entity MIB (Version 2).

RFC 2819: Remote Network Monitoring Management Information Base.

RFC 2829: Authentication Methods for LDAP.

RFC 2830: Lightweight Directory Access Protocol (v3): Extension for Transport Layer Security.

RFC 2863: Interfaces Group MIB.

RFC 3014: Notification Log MIB.

ECI Telecom Ltd. Proprietary

8-5

NPT Product Line System Specifications

Standards and References

RFC 3031: Multiprotocol Label Switching Architecture.

RFC 3032: MPLS Label Stack Encoding.

RFC 3246: An Expedited Forwarding PHB (Per-Hop Behavior).

RFC 3270: Multi-Protocol Label Switching (MPLS) Support of Differentiated Services.

RFC 3376: "Internet Group Management Protocol, Version3"

RFC 3377: Lightweight Directory Access Protocol (v3): Technical Specification.

RFC 3411: SNMP Framework MIB.

RFC 3414: SNMP User-Based SM MIB.

RFC 3415: SNMP Vies-Based ACM MIB.

RFC 3443: Time To Live (TTL) Processing in Multi-Protocol Label Switching (MPLS) Networks.

RFC 3812: Multiprotocol Label Switching (MPLS) Traffic Engineering (TE) Management Information
Base (MIB).

RFC 3813: Multiprotocol Label Switching (MPLS) Label Switching Router (LSR) Management
Information Base (MIB).

RFC 3916: Requirements for Pseudo-Wire Emulation Edge-to-Edge (PWE3).

RFC 3985: Pseudo Wire Emulation Edge-to-Edge (PWE3) Architecture.

RFC 4090: Fast Reroute Extensions to RSVP-TE for LSP Tunnels.

RFC 4125: Maximum Allocation Bandwidth Constraints Model for Diffserv-aware MPLS Traffic
Engineering.

RFC 4126: Max Allocation with Reservation Bandwidth Constraints Model for Diffserv-aware MPLS
Traffic Engineering & Performance Comparisons.

RFC 4379: Detecting Multi-Protocol Label Switched (MPLS) Data Plane Failures.

RFC 4448: Encapsulation Methods for Transport of Ethernet over MPLS Networks.

RFC 4541: Considerations for IGMP and MLD Snooping Switches

RFC 4553: Structure-Agnostic Time Division Multiplexing (TDM) over Packet (SAToP)

RFC 5086: Structure-Aware Time Division Multiplexed (TDM) Circuit Emulation Service over Packet
Switched Network (CESoPSN)

RFC 5087: Time Division Multiplexing over IP (TDMoIP)

RFC 5254: Requirements for Multi-Segment Pseudowire Emulation Edge-to-Edge (PWE3).

RFC 5462: Multiprotocol Label Switching (MPLS) Label Stack Entry: "EXP" Field Renamed to "Traffic
Class" Field.

RFC 5586: MPLS Generic Associated Channel

RFC 5654: Requirements of an MPLS Transport Profile

RFC 5659: An Architecture for Multi-Segment Pseudowire Emulation Edge-to-Edge.

RFC 5718: An In-Band Data Communication Network For the MPLS-TP

RFC 5860: Requirements for OAM in MPLS-TP Networks

RFC 5880: Bidirectional Forwarding Detection (BFD)

ECI Telecom Ltd. Proprietary

8-6

NPT Product Line System Specifications

Standards and References

RFC 5884: Bidirectional Forwarding Detection (BFD) for MPLS Label Switched Paths (LSPs)

RFC 5921: A Framework for MPLS in Transport Networks

RFC 5950: Network Management Framework for MPLS-TP Networks

RFC 5951: Network Management Requirements for MPLS-TP Networks

RFC 5960: MPLS-TP Data Plane Architecture

RFC 6073: Segmented Pseudowire.

RFC 6215 : MPLS-TP User-to-Network (UNI) and Network-to-Network Interfaces (NNI)

RFC 6370: MPLS-TP Identifiers

RFC 6371: OAM Framework for MPLS-TP Networks

RFC 6372: MPLS-TP Survivability Framework

RFC 6378: MPLS Transport Profile (MPLS-TP) Linear Protection

RFC 6423: Using the Generic Associated Channel Label (GAL) for Pseudowire in the MPLS-TP

RFC 6426: MPLS On-Demand Connectivity Verification and Route Tracing

RFC 6427: MPLS Fault Management Operations, Administration, and Maintenance (OAM)

RFC 6428: Proactive Connectivity Verification, Continuity Check, and Remote Defect Indication for the
MPLS Transport Profile

RFC 6378: MPLS Transport Profile (MPLS-TP) Linear Protection

RFC 6718: Pseudowire Redundancy

IETF Drafts:

draft-ietf-l2vpn-vpls-ldp.

draft-ietf-l2vpn-vpls-mcast-reqts.

draft-ietf-magma-snoop.

draft-ietf-mpls-rsvp-te-p2mp.

draft-ietf-mpls-tp-nm-framework.

draft-ietf-mpls-tp-nm-req.

draft-ietf-pwe3-dynamic-ms-pw-14.

draft-ietf-pwe3-ethernet-encap.

draft-ietf-pwe3-ldp-aii-reachability-04.

draft-martini-l2circuit-encap-mpls.

draft-sajassi-l2vpn-vpls-multicast-congruency.

draft-vasseur-mpls-backup-computation.

Parent Topic
8 Standards and References

ECI Telecom Ltd. Proprietary

8-7

NPT Product Line System Specifications

8.7

Standards and References

ISO: International Organization for


Standardization

A2LA: Accredited Laboratory for Electrical and Mechanical Testing.

ISO 9001: Quality Management System Requirements.

ISO 14001: Environmental Management Systems Requirements With Guidance for Use.

ISO 27001: Information Security Management Systems Requirements.

TL 9000, QuEST Forum: Quality Management System Requirements & Measurements Handbooks
for the Telecom Industry.

Parent Topic
8 Standards and References

8.8

ITU-T: International Telecommunication


Union

G.650: Definition and Test Methods for the Relevant Parameters of Single-Mode Fibers.

G.651: Characteristics of a 50/125 m Multimode Graded Index Optical Fiber Cable.

G.652: Characteristics of a Single-Mode Optical Fiber Cable.

G.653: Characteristics of a Dispersion-Shifted Single-Mode Optical Fiber Cable.

G.654: Characteristics of a Cut-off Shifted Single-Mode Optical Fiber Cable.

G.655: Characteristics of a Non-Zero Dispersion Shifted Single-Mode Optical Fiber Cable.

G.661: Definition and Test Methods for the Relevant Generic Parameters of Optical Amplifier Devices
and Subsystems.

G.662: Generic Characteristics of Optical Fiber Amplifier Devices and Subsystems.

G.663: Application Related Aspects of Optical Fiber Amplifier Devices and Subsystems.

G.664: Optical Safety Procedures and Requirements for Optical Transport Systems.

G.671: Transmission Characteristics of Passive Optical Components.

G.691: Optical Interfaces for Single Channel SDH Systems with Optical Amplifiers and STM-64 Systems
(Draft).

G.692: Optical Interfaces for Multi-Channel Systems with Optical Amplifiers.

G.694.1: Spectral Grids for WDM Applications: DWDM Frequency Grid.

G.694.2: Spectral Grids for WDM Applications: CWDM Wavelength Grid.

G.695: Optical Interfaces for Coarse Wavelength Division Multiplexing Applications.

G.703: Physical/Electrical Characteristics of Hierarchical Digital Interfaces.

G.704: Synchronous Frame Structures Used at 1544, 6312, 2048, 8448 and 44 736 kbps Hierarchical
Levels.

G.706: Frame Alignment and CRC Procedures Relating to Basic Frame Structure Defined in Rec G.704.

ECI Telecom Ltd. Proprietary

8-8

NPT Product Line System Specifications

Standards and References

G.707: Network Node Interface for the Synchronous Digital Hierarchy.

G.709: Interfaces for the Optical Transport Network (OTN).

G.752: Characteristics of digital multiplex equipments based on a second order bit rate of 6312 kbit/s
and using positive justification.

G.772: Protected Monitoring Points Provided on Digital Transmission Systems.

G.774 & G774.n: SDH Information Model.

G.775: Loss of Signal (LOS), Alarm Indication Signal (AIS) and Remote Defect Indication (RDI) defect
detection and clearance criteria for PDH signals.

G.781: Synchronization Layer Functions.

G.783: Characteristics of SDH Equipment Functional Blocks.

G.784: Synchronous Digital Hierarchy (SDH) Management.

G.798: Characteristics of OTN Hierarchy Equipment Functional Blocks.

G.803: Architectures of Transport Networks based on the Synchronous Digital Hierarchy.

G.805: Generic Functional Architecture of Transport Networks.

G.806: Characteristics of Transport Equipment Description Methodology and Generic Functionality.

G.809: Functional Architecture of Connectionless Layer Networks.

G.811: Timing Characteristics of Primary Reference Clocks.

G.812: Timing Requirements of Slave Clocks Suitable for Use as Node Clocks in Synchronization
Networks.

G.813: Timing Characteristics of SDH Equipment Slave Clocks (SEC).

G.823: The Control of Jitter and Wander within Digital Networks Based on the 2048 kbit/s Hierarchy.

G.825: The Control of Jitter and Wander within Digital Networks Based on the SDH (Draft).

G.8251: The Control of Jitter and Wander within the Optical Transport Network (OTN).

G.826: Error Performance Parameters and Objectives for International, Constant Bit Rate Digital Paths
at or above the Primary Rate.

G.828: Error Performance Parameters and Objectives for International, Constant Bit Rate
Synchronous Digital Paths.

G.829: Error Performance Events for SDH Multiplex and Regenerator Sections.

G.831: Management Capabilities of Transport Networks Based on the Synchronous Digital Hierarchy
(SDH).

G.841: Types and Characteristics of SDH Network Protection Architectures.

G.842: Inter-Working of SDH Protection Architectures.

G.872: Architecture of Optical Transport Networks.

G.874: Management Aspects of the Optical Transport Network Element.

G.874.1: Optical Transport Network (OTN): Protocol-Neutral Management Information Model for the
Network Element View.

G.957: Optical Interfaces for Equipment and Systems relating to the Synchronous Digital Hierarchy.

ECI Telecom Ltd. Proprietary

8-9

NPT Product Line System Specifications

Standards and References

G.959.1: Optical Transport Network Physical Layer Interfaces.

G.975: Forward Error Correction for Submarine Systems.

G.985: 100 Mbit/s point-to-point Ethernet based optical access system.

G.7041: Generic Framing Procedure (GFP).

G.7042: Link Capacity Adjustment Scheme (LCAS) for Virtual Concatenated Signals.

G.7710/Y.1701: Common equipment management function requirements

G.7712: Architecture and specification of data communication network.

G.7713: Distributed Connection Management.

G.7713.2: RSVP-TE Implementation.

G.7714: Generalized Automatic Discovery Techniques.

G.7714.1: Protocol for Automatic Discovery in SDH & OTN network.

G.7715: ASON Routing.

G.7715.1: Based on PNNI, OSPF or IS_IS.

G.8001/Y.1354: Terms and definitions for Ethernet frames over transport.

G.8010/Y.1306: Architecture of Ethernet Layer Networks.

G.8011/Y.1307: Ethernet Services Framework.

G.8011.1/Y.1307.1: Ethernet Private Line Service.

G.8011.2/Y.1307.2: Ethernet Virtual Private Line Service.

G.8012/Y.1308: Ethernet UNI and Ethernet NNI.

G.8032/Y.1344: Ethernet ring protection switching

G.8080/Y.1304: Architecture for the automatically switched optical network (ASON)

G.8112/Y.1371: Interfaces for the MPLS Transport Profile layer network

G.8113.2/Y.1372.2: Operations, administration and maintenance mechanisms for MPLS-TP networks


using the tools defined for MPLS

G.8201/Y.1354: Error performance parameters and objectives for multi-operator international paths
within the Optical Transport Network (OTN)

G.8261/Y. 1361: Timing and synchronization aspects in packet network.

G.8262/Y. 1362: Timing characteristics of synchronous Ethernet equipment slave clock (EEC).

G.8264: Distribution of timing information through packet networks

G.8265: Architecture and requirements for packet-based frequency delivery

G.8080: Architecture for ASON.

I.356: ATM Layer Cell Transfer Performance.

I.361: ATM Layer Specification.

I.371: Traffic Control and Congestion Control.

I.610: ATM Operation and Maintenance Principles.

M.2140: Transport Network Event Correlation.

ECI Telecom Ltd. Proprietary

8-10

NPT Product Line System Specifications

Standards and References

M.3010: Principles for a Telecommunications Management Network.

M.3013: Considerations for a Telecommunications Management Network.

M.3016.x: Security for the management plane.

M.3017: Framework for the integrated management of hybrid circuit/packet networks.

M.3100: Generic Network Information Model.

M.3180: Catalogue of TMN Management Information.

M.3200: TMN Management Services and Telecommunications Managed Areas: Overview.

M.3300: TMN F Interface Requirements.

M.3400: TMN Management Functions.

Q.821: Alarm Surveillance.

Q.822: Performance Monitoring.

V.10: Electrical characteristics for unbalanced doublecurrent interchange circuits operating at data
signalling rates nominally up to 100 kbit/s.

V.11: Electrical characteristics for balanced double-current interchange circuits operating at data
signalling rates up to 10 Mbit/s.

V.24: List of definitions for interchange circuits between data terminal equipment (DTE) and data
circuit-terminating equipment (DCE)

V.28: Electrical characteristics for unbalanced double-current interchange circuits.

V.110: Support by an ISDN of data terminal equipments with V-series type interfaces

X.217: Open Systems Interconnection, Service Definition for the Association Control Service Element.

X.219: Remote Operations - Model, Notation and Service Definition.

X.227: Open Systems Interconnection, Connection-Oriented Protocol for the Association Control
Service Element - Protocol Specification.

X.229: Remote Operations: Protocol Specification.

X.710: Open Systems Interconnection, Common Management Information Service.

X.720: Open Systems Interconnection, Structure of Management Information - Management


Information Model.

X.721 Information Technology: Open Systems Interconnection, Structure of Management


Information - Definition of Management Information.

X.722: Open Systems Interconnection, Structure of Management Information - Guidelines for the
Definition of Managed Objects.

X.731: Open Systems Interconnection, Systems Management - State Management Function.

X.733: Open Systems Interconnection, Systems Management - Alarm Reporting Function.

X.743: Open Systems Interconnection, Systems Management - Time Management Function.

X.744: Open Systems Interconnection, Systems Management - Software Management Function.

Y.1311: Network-based VPNs - Generic architecture and service requirements.

Y.1710: Requirements for Operation & Maintenance functionality for MPLS networks.

ECI Telecom Ltd. Proprietary

8-11

NPT Product Line System Specifications

Standards and References

Y.1711: Operation & Maintenance mechanism for MPLS networks.

Y.1413: TDM-MPLS network interworking User plane interworking

Y.1731: OAM functions and mechanisms for Ethernet based networks

Z.351: Data oriented human-machine interface specification technique introduction.

Z.352: Data oriented human-machine interface specification technique scope, approach and usage.

Z.361: Design guidelines for Human-Computer Interfaces (HCI) for the management of
telecommunications networks.

Parent Topic

8 Standards and References

8.9

MEF: Metro Ethernet Forum

CE 2.0 MEF services with multiple Classes of Service (Multi-CoS) & E-Access Ethernet Network to
Network Interconnect and Manageability (E-NNI and E-Access).

MEF3 Circuit Emulation Service Definitions, Framework and Requirements in Metro Ethernet
Networks

MEF4 Metro Ethernet Network Architecture Framework Part 1: Generic Framework.

MEF6 Metro Ethernet Services Definitions.

MEF7 EMS-NMS Information Model.

MEF8 Implementation Agreement for the Emulation of PDH Circuits over Metro Ethernet Networks

MEF9 Ethernet Services at the UNI

MEF10 Ethernet Service Attributes.

MEF11 User Network Interface (UNI) Requirements and Framework.

MEF12 Metro Ethernet Network Architecture Framework Part 2: Ethernet Services Layer.

MEF14 Test Suite for Ethernet Traffic Management.

MEF15 Requirements for Management of Metro Ethernet Phase 1 Network Elements

MEF26 External Network Network Interface Technical Specification

MPLS-TP Network Management requirements (draft-ietf-mpls-tp-nm-req)

MPLS-TP NM Framework (draft-ietf-mpls-tp-nm-framework)

Parent Topic

8 Standards and References

8.10 NIST: National Institute of Standards and


Technology

FIPS PUB 197: Advanced Encryption Standard (AES).

FIPS PUB 140-2: Security Requirements for Cryptographic Modules.

Parent Topic

8 Standards and References


ECI Telecom Ltd. Proprietary

8-12

NPT Product Line System Specifications

Standards and References

8.11 North American Standards

ANSI FCF1-2: Fiber Channel Physical Interface REV 10.

ANSI T1.102: Digital hierarchy electrical interface.

ANSI T1.105: Synchronous Optical Network (SONET) - Basic Description including Multiplex Structure,
Rates, and Formats.

ANSI X3.296: Single-Byte Command code sets CONnection (SBCON) architecture.

FCC CFR Title 47 Part 15: Radio Emission.

FCC Part 101.147 Fixed microwave services: (i8, i7, K7, 7)

NEBS GR1089 and GR63 (temperature aspect)

NEBS Level 3 support for N.A. platforms.

Rural Utility Service (RUS) Certification.

Telcordia GR-63-CORE: Network Equipment Building System (NEBS) Requirements: Physical


Protection.

Telcordia GR-253-CORE: Synchronous Optical Network (SONET) Transport Systems: Common Generic
Criteria.

Telcordia GR-383-CORE: COMMON LANGUAGE Equipment Codes (CLEI Codes) Generic


Requirements for Bar Code Labels.

Telcordia GR-487-CORE: Generic Requirements for Electronic Equipment Cabinets.

Telcordia GR-499-CORE: Transport System Generic Requirements (TSGR): Common Requirements.

Telcordia GR-1089-CORE: Electromagnetic Compatibility and Electrical Safety Generic Criteria for
Network Telecommunications Equipment.

Telcordia GR-1209-CORE: Generic Requirements for Passive Optical Components.

Telcordia GR-1230-CORE: SONET Bidirectional Line-Switched Ring Equipment Generic Criteria.

Telcordia GD-1244-CORE: Clock for the synchronization network: Common generic criteria.

Telcordia GR-1312-CORE: Generic Requirements for Optical Fiber Amplifiers and Proprietary Dense
Wavelength-Division Multiplexed Systems.

Telcordia GR-1400-CORE: SONET Dual-Fed Unidirectional Path Switched Ring (UPSR) Equipment
Generic Criteria.

Telcordia GD-2979-CORE: Common Generic Requirements for Optical Add-Drop Multiplexers


(OADMs) and Optical Terminal Multiplexers (OTMs).

Parent Topic
8 Standards and References

ECI Telecom Ltd. Proprietary

8-13

NPT Product Line System Specifications

Standards and References

8.12 OMG: Object Management Group

Notification Service Specification V 1.0.

The Common Object Request Broker: Architecture and Specification V 2.6.

Parent Topic
8 Standards and References

8.13 TMF: TeleManagement Forum

TMF 513: MTNM Business Agreement Release 3.5.

TMF 518: Framework Document Delivery Package (DDP) Business Agreement (BA) V1.1.

TMF 518: Resource Provisioning DDP BA V1.0.

TMF 608: Multi Technology Network Management Information Agreement V 2.1 and V 3.5.

TMF 814: Multi Technology Network Management Solution Set V 2.1 and V 3.5.

TMF 854: The MTOSI XML Solution Set Package Release 1.1.

Parent Topic
8 Standards and References

8.14 Web Protocol Standards


W3C: World Wide Web Consortium

SOAP 1.1: Simple Object Access Protocol.

WSDL 1.1: Web Services Description Language.

WS-I: Web Services Interoperability Organization

WS-I Basic Profile 1.1: Web Services Interoperability.

Parent Topic
8 Standards and References

ECI Telecom Ltd. Proprietary

8-14

Anda mungkin juga menyukai