Notice
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
BSS
Remote Upgrade of BSC&BTS Software
Contents
Contents
1 Introduction................................................................................................................. 1-1
1.1 Scope ............................................................................................................................................ 1-1
1.2 Intended Audience ........................................................................................................................ 1-1
1.3 Change History.............................................................................................................................. 1-1
Issue 01 (2010-01-20)
iii
BSS
Remote Upgrade of BSC&BTS Software
1 Introduction
1 Introduction
1.1 Scope
This document describes the application scenarios and network structure for remote upgrade of the BSC
and BTS software in GBSS9.0.
Feature change: refers to the change in the Remote Upgrade of the BSC&BTS Software feature of a
specific product version.
Editorial change: refers to the change in wording or the addition of the information that was not
described in the earlier version.
Document Issues
The document issues are as follows:
z
01 (2010-01-20)
01 (2010-01-20)
This is the first commercial release of GBSS9.0.
Issue 01 (2010-01-20)
1-1
BSS
Remote Upgrade of BSC&BTS Software
Issue 01 (2010-01-20)
2-1
BSS
Remote Upgrade of BSC&BTS Software
3 Technical Description
3 Technical Description
3.1 Typical Network Structure for Remote Software Upgrade
Figure 3-1 shows a typical network structure for remote upgrade of the BSC and BTS software in
GBSS9.0.
Figure 3-1 Typical network structure for remote upgrade of the BSC and BTS software in GBSS9.0
Issue 01 (2010-01-20)
3-1
BSS
Remote Upgrade of BSC&BTS Software
3 Technical Description
The preparation involves applying for a new license, collecting the information about the site, performing
the NE health check, and preparing files for the upgrade.
z
The basic information includes the upgrade type, OMU IP address, and administrator password for the
OMU.
z
Perform pre-upgrade.
The pre-upgrade involves backing up data, checking the environment information, and pre-upgrading
the OMU software and data.
z
Perform upgrade.
The upgrade involves upgrading the OMU version and restarting the host.
z
3-2
Issue 01 (2010-01-20)
BSS
Remote Upgrade of BSC&BTS Software
3 Technical Description
The verification involves checking the network health and verifying services. The purpose of network
health check is to check the resource usage and state of NEs. The purpose of service verification is to
verify whether services are processed properly after the upgrade.
z
If the version or patch is found faulty after the version upgrade or patch installation, version rollback must
be performed.
In a one-key upgrade, maintenance personnel load and activate the BTS software through the M2000.
In an automatic upgrade, the BSC automatically upgrades the BTS software according to the BTS
software version information configured by the maintenance personnel. Automatic upgrade does not
require manual operation.
Issue 01 (2010-01-20)
3-3
BSS
Remote Upgrade of BSC&BTS Software
3 Technical Description
Download the BTS software from the M2000 to the BSC OMU.
z
Activate the new software version of the BTS. Then, restart the BTS.
3-4
Issue 01 (2010-01-20)
BSS
Remote Upgrade of BSC&BTS Software
z
3 Technical Description
After the upgrade, check the NE version, state, and alarms and check whether services are processed
properly after the upgrade.
z
If the version or patch is found faulty after the version upgrade or patch installation, version rollback must
be performed.
Check of software and hardware compatibility, which ensures a successful software installation and
upgrade
Version management, for example, query of the software and hardware version
Improvement of the software download efficiency and expansion of OM channel bandwidth during
software upgrade
In a one-key upgrade, multiple BTSs under one or more BSCs can be upgraded through the M2000.
If more than 500 BTSs need to be upgraded, the M2000 upgrades these BTSs in batches, with not
more than 500 BTSs in each batch.
A maximum of 100 BTSs under one BSC can be loaded simultaneously through the M2000. If more
than 100 BTSs under one BSC need to be upgraded, the BSC upgrades these BTSs in batches, with
not more than 100 BTSs in each batch.
Issue 01 (2010-01-20)
3-5
BSS
Remote Upgrade of BSC&BTS Software
4 Parameters
4 Parameters
None
Issue 01 (2010-01-20)
4-1
BSS
Remote Upgrade of BSC&BTS Software
5 Counters
5 Counters
None
Issue 01 (2010-01-20)
5-1
BSS
Remote Upgrade of BSC&BTS Software
6 Glossary
6 Glossary
For the acronyms, abbreviations, terms, and definitions, see the Glossary.
Issue 01 (2010-01-20)
6-1
BSS
Remote Upgrade of BSC&BTS Software
7 Reference Documents
7 Reference Documents
z
Issue 01 (2010-01-20)
7-1