BrekekeWiki
Steps to set up authentication accounts at Brekeke SIP Server > [User Authentication]:
1. From product admintool > [User Authentication], click [New User], and set:
a. [User]: Phone number (SIP user ID)
b. [Password]: AnyPassword
c. [Confirm Password]: SamePassword
d. [Name]: Description to remind you whose authentication account this is
e. [Email Address]: User contact email
f. Click the [Add] button
g. To make sure the user authentication information has been added, click on [User
Authentication]
2. In this example, we will create authentication accounts from both XLite SIP UAs. The authentication
http://wiki.brekeke.com/wiki/printPage.php?pageID=533aa9a5faf5e35f4166668fbb3fdd324fb591dc38d08
1/2
5/25/2015
BrekekeWiki
user IDs below need to be the same as the XLite phone numbers (SIP user IDs), which is required by
the default authentication setting in [Configuration] > [SIP] > [Authentication] / [Authuser=user xxxx]
fields
a. XLite A User Authentication account:
i. [User]: 100
ii. [Password]: 1234
iii. [Confirm Password]: 1234
iv. [Name]: XLite A
b. XLite B User Authentication account:
i. [User]: 101
ii. [Password]: 5678
iii. [Confirm Password]: 5678
iv. [Name]: XLite B
Step 4 Setting up XLite SIP UAs
1. Set up XLite as a SIP UA:
a. Start XLite by choosing "Start" / "All Programs" / "XLite."
b. From the XLite menu, click "Softphone" / "Account Settings".
Then from the popup window "Account" tab, set:
i. User ID: user set in step 32a/2b such as, 100 or 101
ii. Domain: 192.168.0.102 (the Brekeke PBX server IP address set in step 1)
iii. Password: the password set in step 32a/2b for each XLite authentication account
iv. Display Name: any
v. Authorization Name: user set in step 32a/2b
vi. Check field "Register with domain and receive calls."
vii. Under the "Send outbound via:" section, select the "domain" field.
2. In order for XLite to work as a voice communication device, you must have a microphone and
speaker(s) connected to your PC.
3. Verify that XLite has been successfully registered on two PCs.
From the Brekeke SIP Server Admintool > [Registered Clients] page, both XLite registration records will
show as:
[user:] 100 [Contact URL:] sip:100@pc1_IP
[user:] 101 [Contact URL:] sip:101@pc2_IP
Step 5 Making Calls
Dialing the XLite SIP User ID shown on the Brekeke SIP Server Admintool > [Registered Clients] page
To make a call from XLite A to XLite B:
1. Enter 101 and press the [Dial] button.
XLite A SIP User ID, 100, will show on XLite B as the caller number.
2. To hang up, press the [hang up] button.
To make a call from XLite B to XLite A:
1. Enter 100 and press the [Dial] button.
2. To hang up, press the [hang up] button.
See also:
Setting port forwarding when Brekeke Server is behind NAT
List of SIP devices and services tested and confirmed with Brekeke products
Need technical assitance?
http://wiki.brekeke.com/wiki/printPage.php?pageID=533aa9a5faf5e35f4166668fbb3fdd324fb591dc38d08
2/2