Fiber-Patch-Cords
SC
ST
MU
MTRJ
FC
E2000
MPO
Polish Types: PC < - 40dB, UPC (Ultra Physical Contact) <50dB, APC(Angled Physical Contact) <60dB
PC
UPC
APC
To reduce the back reflection of a connector,UPC polish. Industry standard is a minimum of40dB for PC back reflec-tion
measurement and50dB for UPC back reflection measurement. If even less back reflection is required, an APC might be necessary.
An APC connector has an 8angle cut into the ferrule. These connectors are identifiable by their green color. An APC polished
connector has an Indus-try Standard Minimum of60dB measurement. APC fiber ends have low back reflection even when
disconnected.
Email:sales@fiberstore.com
Datasheet
Fiber Type: Single Mode 9/125m OS1, OS2, Multimode 62.5/125m OM1, Multimode 50/125m OM2, Multimode 50/125m
OM3 10Gb gig, Multimode 50/125m 10Gb OM4
TECH SPEC
2.5-m: 850 nm:2.9 dB/km;1300 nm:0.6 dB/km;
50-m PVC: 850 nm:2.4 dB/km; 1300 nm:0.7 dB/km;
ATTENUATION
BANDWIDTH
OPERATING
TEMPERATURE
OPTIMIZED
DATA RATE
50-m: 1 Gbps over 600 m; 10-GbE 50-m: 1 Gbps over;1000 m at 850 nm;
10-Gbps at 300 m at 850 nm
62.5-m: ISO/IEC 11801: Type OM1 fiber; IEC 60793-2-10: Type A1b fiber; TIA/EIA: 492AAAA-A;
50-m PVC: ISO/IEC 11801: Type OM2 fiber; IEC 60793-2-10: Type A1a.1 fiber;TIA/EIA: 492AAAB;
STANDARDS
10-GbE 50-m PVC: ISO/IEC 11801: Type OM3 fiber; Type A1a.2; TIA/EIA: 492AAAC-B
Single-mode: ITU-T G.652 (Categories A, B, C, D); IEC 60793-2-50 Type B1.3;TIA/EIA 492-CAAB; Telecordia
GR-20
Fiber Count: Simplex(A single fiber), Duplex(2 fibers in a single cable, Zip Cord), Multi-Fiber cables, custom configurations,
common are 4 fiber, 6fiber, 8fiber, 12 fiber, 24 fiber, 48 fiber, 72 fiber, 144 fiber, 256 fiber. Higher fiber counts are normally
termi-nated as a MTP/MPO Trunk cables, using MTP/MPO connectors.
Email:sales@fiberstore.com
Datasheet
Multimode sample
10Gb sample
Green
Brown
Gray
Black
White
Purple
Red
Pink
Jacket material options: PVC jacket, OFNR Riser jacket, OFNP Plenum Jacket, LSZH, Armored Jacket
OFNR (Optical Fiber Nonconductive Riser)
This is cable containing only glass fiber with no copper conductive elements. It is generally intended for vertical runs between floors
as part of a fiber backbone. This type of cable complies with the Underwriters Laboratories (UL) fire safety test Riser/1666.
OFNP (Optical Fiber Nonconductive Plenum)
This is a cable containing only glass fiber with no copper conductive elements. It is generally intended for horizontal runs especially
within an air handing conduit. This type of cable complies with the Underwriters Laboratories (UL) fire safety test Riser/1666.
Cable length: Any cable length option, Normally measured in Meters. Optional lengths, CM, mm, Inches, Foot, KM, Mile
Labeling: FiberStore Labels as defaultGeneric LabelsSpecific Labels as RequestNo Labels
With the on-site, precision manufacturing equipment and our skilled workers, our fiber optic patch cords are reliable and 100%
tested according to industrial and international standards to guarantee top performance. All our fiber patch cords are with flexible
customization, good prices and very prompt delivery.
Each assembly is serialized for easy identification ans sealed in individual Ziploc bags.
Email:sales@fiberstore.com
Datasheet
Buying Guide
MAKE TO ORDER Customizing your Fiber Patch Cable(options)
FIBER TYPE
JACKET TYPE
CABLE
DIAMETER
CABLE
FIBER COUNT
CONNECTOR
POLISH TYPE
(METER)
OS1 9/125
900um
SIMPLEX
FIRST END
PC Polish
OS2 9/125
LSZH
1.6mm
DUPLEX
LC
UPC Polish
OM1 62.5/125
Plenum
2.0mm
4 FIBERS
SC
APC Polish
3.0mm
6 FIBERS
ST
OM 310G 50/125
8 FIBERS
FC
OM4 50/125
12 FIBERS
MU
24 FIBERS
MTRJ
48 FIBERS
MPO(Female)
>48 FIBERS
MPO(Male)
OM2 50/125
LENGTH
Any length
E2000
DIN
SECOND END
LC
SC
ST
FC
MU
MTRJ
PO(Female)
MPO(Male)
E2000
DIN
Email:sales@fiberstore.com