Barriers
www.werra.de
www.perimeterprotection.net
Boom Barriers
Efficient access control
without any limitations
Features
Automatic controls
Robust steel construction
Stainless steel barrier housing
For large and small gateways
Day and night operations
Designed for continuous use
Special versions
Can be adapted to your strict
security requirements
Modular principle
All GES type barriers are manu
factured as modules. This allows
wearing parts to be easily replaced
as well as making maintenance
and service very customer-friendly.
Types
GHS type
PPG`s GHS manual boom barriers
are used for entrances which are
only rarely opened or closed. The
frame of the barrier holder and
support post are made out of sta
ble steel sections. When at rest, the
barrier is supported and secured in
place by a lockable support post.
GES type
Pendulum support
www.perimeterprotection.net
One of the distinguishing features of the GEHS is the simplicity of assembly which allows the system to be easily fitted. This results from
the pre-assembly and the thorough functionality check in the factory.
Benefits
Pole stand made of steel with base plate and bore holes for compound anchors
Pole stand casing made of stainless steel with integrated control board
Electro-hydraulic drive aggregate with motor, high pressure pump, cylinder, non return
and flow control valves
Adjustable raising and lowering speed as well as damping in final positions
Mechanical limit stop and electrical switch off for final positions
Poweder coated with red reflecting warning tape
Maximum clear passage width 6.0m
Fully automated movement e. g. via push button, key switch, remote control system,
magnetic/ digital code card reader, photo cells, light beam barriers, induction loops etc.
Integration into existing access control systems possible
Designed for up to and large gateways of 6m
Day and night operations are possible
Designed for continous use
Special versions are possible
GEHS can be adapted to your strict security requirements
ID - 2012-06_EN_W_01
We reserve the right to alter pro duct information without any obligation.