(TANCA 2015)
M.E./M.Tech./M.Arch./M.Plan. Degree Programmes
The candidates who intend to apply for seats under GATE and TANCET category
have to send the filled-in applications to
The Secretary
Tamil Nadu Common Admissions (TANCA)
Anna University
Chennai 600 025.
The candidates who intend to apply for seats under Sponsored category have
to send the filled-in applications directly as given below:
In University Departments of
Anna University, Chennai 25
In Government Engineering
Colleges
In Government Aided
Engineering Colleges
M.E./M.TECH./M.ARCH./M.PLAN.
DEGREE PROGRAMMES
ANNA UNIVERSITY
CHENNAI 600 025
Website: www.annauniv.edu/tanca2015
Full-Time
Candidates admitted under Full-Time should be available in the departments during working hours
for the curricular, co-curricular and extra-curricular activities.
Candidates should not attend any other Full-Time programme(s) / course(s) or take up any FullTime job / Part-Time job in any institution or company during the period of the programme.
Violation of the above rules will result in cancellation of admission.
Part-Time
Part-Time candidates will not be permitted to convert to Full-Time mode during the course of study.
1. CATEGORY OF INSTITUTIONS
The Government of Tamil Nadu in G.O. (D) No. 17, Higher Education (J2) Department, dated
24.01.2013 have nominated Anna University, Chennai-25 as its nodal agency for the conduct of
Tamil Nadu Common Admissions through single window counselling for M.E. / M.Tech. / M.Arch. /
M.Plan. degree programmes offered at
i.
ii.
iii.
2. ELIGIBILITY
Candidates who have passed all the subjects in the recognised Bachelors degree or equivalent field and
obtained at least 50 % (45 % in the case of candidates belonging to reserved categories) in the qualifying
degree examination as per AICTE norms. Also, the candidate should
i)
ii)
have qualified* GATE 2015 with valid score in the appropriate discipline of Engineering /
Technology
iii)
have qualified* GATE 2015 with valid score in Engineering Science (XE) and Life Science (XL)
papers along with TANCET 2015 score
* A candidate is considered qualified GATE 2015 if the marks secured are greater than or equal to
the qualifying marks mentioned for the category in the GATE 2015 score card (refer Item 4.2,
Page 4).
shall be considered for admission to M.E. / M.Tech. / M.Arch. / M.Plan. degree programmes. Eligibility
qualifications for admission to various programmes are given in Annexure I.
If a candidate claims that the educational qualification possessed by him / her (though not the same
as prescribed eligible qualification) is equivalent to the eligible qualification prescribed in
Annexure - I, he/she should obtain the equivalency certificate from the Director, Academic Courses,
Anna University, Chennai-25 on or before the last date for submission of the application. However,
the claim would be subject to the decision of the admitting authority.
Candidates in the following categories may apply for admission:
a.
Candidates appeared for the final semester / year examination of the qualifying degree
programmes during April / May 2015, except A.M.I.E.
b.
Candidates should produce an evidence for having passed all the subjects in the qualifying
degree examination at the time of counselling, otherwise the candidates will not be permitted
to attend counselling. Copy of results downloaded from internet is permitted only when it is
attested by the Head of Department concerned / Controller of Examinations.
c.
Candidates with Section A & B certificates (e.g. A.M.I.E.) of the Institution of Engineers and
other similar certificates of various professional bodies viz., Aeronautical Society of India etc.,
recognised by the Ministry of Human Resources Development, Government of India and
enrolled before 31.5.2013 are considered to be equivalent to B.E./ B.Tech degree holders for
admission to M.E./ M.Tech. degree programmes subject to the following conditions:
1. Candidates should have studied 10 + 2 years H.Sc. + AMIE (with 2 years experience) (or)
10 + 3 Years diploma (awarded by the State Board of Technical Education) + AMIE (with
2 years experience)
2. Two years regular full time Teaching experience / Industrial experience in the relevant field
after passing all the subjects including project work. An experience certificate has to be
produced by the candidate.
3. Must have qualified GATE 2015 with valid score or TANCET 2015 score.
1
2
3
Note:
Candidates admitted through Lateral Entry in degree courses are not eligible except,
B.E./B.Tech. and MCA Lateral Entry.
Candidates with B.E./B.Tech. degrees obtained through Distance mode/Week end courses
are not eligible.
Candidates with degree obtained without studying 10th Std, 12th Std. or 3 years diploma
and 3/4 years degree programme are not eligible.
3. NATIVITY
a. Candidates who have studied continuously for the last 5 years (from XII Standard onwards)
in Tamil Nadu will be considered as Tamil Nadu candidates. Candidates who are Native
of Tamil Nadu but have studied XII or/ and Diploma, Degree outside Tamil Nadu have to
enclose a photo copy of Nativity Certificate only in electronic form / digitally signed e-Certificate.
b. Candidates belonging to Other States are eligible for Open Competition only.
c.
Candidates who are Sri Lankan Refugees and passed the recognised qualifying degree (with a
minimum of 50 % marks) in Tamil Nadu will be considered for admission to
M.E./M.Tech./M.Arch./M.Plan. degree programmes as per rank, under Open Competition through
Single Window Counselling. Sri Lankan Refugee candidates should enclose a copy of the
identification certificate obtained from the Head Quarters Tahsildars and those who have not
registered in Refugees Camps should enclose a copy of visa, passport and letter registered in
Police Station. Candidates must have also appeared for TANCET 2015 conducted by Anna
University.
4.
REGISTRATION UNDER GATE / TANCET CATEGORY FOR AIDED & SELF SUPPORTING
PROGRAMMES
4.1 CATEGORIES
Candidates have to register application separately for each category. (1) GATE (Engineering /
Technology)
(2) GATE - Engineering Science (XE) / Life Science (XL) (3) TANCET
(4) Sponsored.
GATE
Engineering / Technology
(1)
1
a.
Sponsored
(3)
(4)
GATE Category
GATE (Engineering / Technology) category: Candidates who have qualified GATE 2015 in the
appropriate discipline of Engineering / Technology shown below (should have obtained greater
than or equal to the qualifying marks mentioned in GATE 2015 for assistantship)
Paper
Code
AE
AG
AR
BT
CE
CH
CS
CY
EC
EE
b.
(2)
TANCET
Paper
Code
Aerospace Engineering
EY
Agricultural Engineering
GG
Architecture and Planning
IN
Biotechnology
MA
Civil Engineering
ME
Chemical Engineering
MN
Computer Science and Information Technology
MT
Chemistry
PH
Electronics and Communication Engineering
PI
Electrical Engineering
TF
Test Paper
Test Paper
Ecology and Evolution
Geology and Geophysics
Instrumentation Engineering
Mathematics
Mechanical Engineering
Mining Engineering
Metallurgical Engineering
Physics
Production and Industrial Engineering
Textile Engg. and Fibre Science
GATE (Engineering Science (XE) / Life Science (XL) category : Candidates who have
qualified GATE 2015 with valid score in Engineering Science (XE) and Life Science (XL) papers.
Candidates under this category should have also appeared for TANCET - 2015 conducted by
Anna University (the mark is calculated by considering both GATE 2015 score and TANCET
2015 score in the ratio 70:30).
2
TANCET Category
Candidates who have appeared for TANCET 2015 conducted by Anna University.
In addition, the candidates admitted under sponsored category in the University Departments of
Anna University, Chennai should satisfy the conditions given below.
Sponsored Full-time
Candidates should be deputed with full pay and allowances during the period of study.
Candidates should have obtained atleast 50 % marks in aggregate in the qualifying degree
examination.
Candidates must have a minimum of two years full time experience in the relevant field of
the programme to which admission is sought after passing the qualifying degree.
The filled-in application (print out obtain from online application portal) with all
enclosures for the seats under sponsored category are to be sent to The Director,
Centre for Admissions, Anna University, Chennai 600 025.
4.2
SC/SCA/ST
(candidates
belonging to
Tamilnadu
only)
Tamilnadu
BC / BCM
/ MBC &
DNC
AE
AG
AR
BT
CE
CH
CS
CY
EC
EE
EY
17.68
16.67
30.11
17.39
16.67
18.34
16.67
20.15
16.67
16.67
25.72
23.87
22.5
40.65
23.47
22.5
24.77
22.5
27.2
22.5
22.5
34.73
GG
IN
MA
ME
MN
MT
PH
PI
TF
XE
XL
23.36
16.96
17.06
21.82
25
39.65
18.1
17.88
21.25
19.66
18.99
31.54
22.9
23.03
29.46
33.75
53.53
24.44
24.14
28.69
26.54
25.63
35.04
25.45
25.59
32.73
37.5
59.47
27.15
26.82
31.88
29.49
28.48
Candidates who have obtained lesser than the qualifying marks as mentioned above
will not be called for counselling.
Other State candidates will be considered under Others category only.
5.
ALLOCATION OF SEATS
6.1
Seats shall be allocated following the rule of reservation of the Government of Tamil Nadu as
given below.
69 % Rule of Reservation
Open Competition
Backward Class
Backward Class Muslim
Most Backward Class & Denotified Communities
Scheduled Caste
Scheduled Caste (Arunthathiyars)
Scheduled Tribes
31.00
26.50
3.50
20.00
15.00
3.00
1.00
%
%
%
%
%
%
%
Tamil Nadu native candidates alone will be considered for communal reservation.
The list of communities is given in Annexure II on page no. 34-40.
6.2
Candidates seeking admission under ST/ SC/ SCA/ MBC & DNC/ BC/BCM (BC Muslim) quota
should obtain the certificate of social status issued by the competent authority in the Permanent
Community card format or electronic form / digitally signed e-Certificate prescribed by the
Government of Tamil Nadu and enclose an attested photocopy of the same along with the
application.
a) The applicants from Tamil Nadu State should have obtained permanent community
certificate (for SC/SCA/ST/MBC & DNC, BC and BC Muslim candidates) either in permanent
card format or electronic form / Digitally signed e-Certificate only from the authorities given
below on or before the last date prescribed for submission of filled-in application.
Community
Scheduled Tribe
Issuing Authority
Revenue Divisional Officer of their native place or
Sub-Collector of their districts (except Chennai)
or P.A. (General) to Collector of Chennai. The
Community Certificate card issued by Tahsildars
upto 11.11.1989 is valid.
Tahsildar of Native Taluk of the candidate
Headquarters Deputy Tahsildar / Zonal Deputy
Tahsildar / Deputy Tahsildar (Certificates)
Community Certificate issued after the last date prescribed for submission of filled-in
applications will not be considered.
b) Community Certificate obtained from Other States will not be considered for communal
reservation.
c) For communities linked with districts (Refer Annexure II of the information and
instructions to candidates) the candidates should obtain their community certificate in their
respective district. Community certificates obtained from other than their respective district
will not be considered. However, candidates who belong to BC, MBC and DNC communities
in a particular district and migrated to other places in Tamil Nadu and obtained Community
Certificates from competent authorities in the migrated district on or after 28.10.2009, will
be considered. (as per G.O. (St) No.95 BC, MBC & Minorities Welfare Department, dated
28.10.2009).
d) Candidates who have not enclosed a photocopy of the Permanent Community certificate or
electronic form / digitally signed e-Certificate at the time of submission of the application
will be treated under Open Competition (OC) Category. In the event of such a decision, the
eligibility conditions and rules prescribed for OC category will be applicable for such
candidates and if such candidates do not satisfy the rules of OC Category their
applications are liable to be rejected. No correspondence in this regard will be entertained.
7.
7.1
Orthopaedically
:
1%*
Hearing Impaired
:
1%*
Visually Impaired
:
1%*
* 1 % of total seats surrendered for Single Window Counselling for TANCA 2015.
c.
Category
Better eye
Worse eye
Percentage of
impairment
Category 0
6/9-6/18
6/24 to 6/36
20
Category I
6/166/36
6/20 to Nil
40
Category II
3/60 to Nil
75
Category III
100
Category IV
100
30
COUNSELLING
8.1
Seats will be allotted through counselling only. More number of candidates than the actual
number of seats available will be called for counselling. Candidates are advised to check the
seats available in the website www.annauniv.edu/tanca2015. Admission will be offered depending
upon the seats available based on the merit of the candidates who attend counselling as per
the reservation norms of Government of Tamil Nadu and others cannot claim any right for
admission. A candidate can get allotment for one programme only.
Note : The availability of number of seats/courses/branches hosted in the Anna University website
is subject to change before the counselling.
8.2
GATE category candidates must appear for counselling with GATE 2015 score card.
Unfilled seats if any, under GATE category will be converted to Non-GATE category in the respective
communities.
Candidates who have passed all the subjects of the qualifying degree with a minimum of
50 % marks for General category and 45 % marks for reserved categories (BC / BCM / MBC&DNC /
SC / SCA / ST candidates belonging to Tamil Nadu) in the qualifying examination alone will be
permitted to attend counselling.
The counselling schedule and the format of Intimation of Counselling containing details about
counselling will be published in Anna University website http://www.annauniv.edu/tanca2015 before
the commencement of counselling.
Eligible candidates may appear for counselling according to their cut-off mark and they
should report two hours before the counselling session irrespective of receipt of
individual communication. Candidates who do not attend the counselling have to forego
the claim of admission.
Counselling will be held at Anna University, Chennai-25. Candidates should attend the counselling
at their own cost with all the original certificates. If a candidate has deposited all the certificates
where he/she has already been admitted, a letter from the head of the institution should be
produced to that effect. In such cases only, attested photocopies of certificates will be accepted.
However, the original allotment order will be withheld and it will be given after verifying the
original certificates.
Change of date / time of counselling is not permissible. Authorities are not responsible for the postal
delay or non-receipt of counselling intimation.
At the time of counselling the candidates have to pay ` 5,300/- (` 1,150/- for SC / SCA / ST
candidates belonging to Tamil Nadu) in the form of a Demand Draft or Cash, which includes a
non-refundable fee of ` 300/-towards counselling fee (` 150/- for SC/SCA/ST candidates
belonging to Tamil Nadu) and attend the counselling with all the original certificates. The Demand
Draft should be drawn in favour of The Secretary, TANCA, Anna University payable at
Chennai.
Due to unforeseen and unavoidable reasons, if a candidate is unable to attend the counselling on
the specified date and time he/she can
1.
Authorise his/her parent on his/her behalf and the parents decision will be binding on the
candidate. An authorisation letter given by the candidate should be submitted by the parents.
Parents should also produce a photo identity of any one, voter ID, driving license, PAN card
and passport.
2.
Attend on a subsequent time/date, during the counselling period. But the candidate can only
opt for the seats available at the time of attending the counselling and cannot claim seat as
per the rank.
Once a seat is allotted, the amount of ` 5,000/- for general or ` 1,000/- for SC/SCA/ST
candidates already paid at the time of counselling will be adjusted towards the tuition fee to be paid
to the respective allotted college.
The refund will be processed only through TANCA 2015 Refund Processing System available online
in TANCA website.
Applications for refund beyond 31.12.2015 will not be accepted and it will be summarily rejected.
Candidates are advised to post the completed application with all the enclosures well in advance so
as to reach Anna University, Chennai-25 on or before the specified date and time. Application may
be sent by Registered post or Speed post to avoid any delay.
The Secretary, Tamil Nadu Common Admissions will not be responsible for postal or any
other delay. Applications received after the last date and time will be summarily
rejected.
Candidates once allotted will be given a provisional allotment order and a receipt for the initial
payment. The candidates have to pay the remaining fees in the college concerned at the time of
admission on the date specified in the allotment order. No further correspondence will be
entertained pertaining to Admissions.
All admissions made through the single window counselling are provisional.
Counselling and admitting authorities reserve the right to accept or reject any application without
assigning any reason.
College / Branch once allotted will not be changed under any circumstances.
9.
Code No.
B.E./
B.Tech.
B.Arch/
B.Plan./
AIIA
B.Sc.
(4 years)
B.Pharm.
MCA
MA/ M.Sc
(2 years)
M.Sc.
Integrated
(5 years)
A.M.I.E /
A.M.Ae.S.I
Other
equivalent
10
Code
No.
Discipline
Discipline
101
Aeronautical Engineering
136
Electrical
102
137
103
Agriculture Bio-Technology
138
104
Agriculture
139
Electronics
105
Agriculture Engineering
140
106
Applied Chemistry
141
Energy System
107
Apparel Technology
142
Energy Engineering
108
Architecture
143
Engineering Physics
109
Automobile Engineering
144
Environmental Chemistry
110
145
Environmental Science
111
Bio-Chemical Engineering
146
112
Bio-Chemistry
147
113
Bio-Medical
148
Fisheries Science
114
Biomedical Instrumentation
149
Fishery
115
Bio-Physics
150
116
Bio-Engineering
151
117
Bio-Technology
152
Food Technology
118
Bio-Informatics
153
Forestry
119
Bio-Pharmaceutical
154
Genetic Engineering
120
155
121
Ceramic Technology
156
Genetics
122
157
Geo Informatics
123
158
Geosciences
124
Chemistry
159
Geography
125
160
126
Civil Engineering
161
Horticulture
127
Computer Applications
162
128
163
Industrial Bio-Technology
129
Computer Science
164
Industrial Engineering
130
165
Instrumentation
131
166
Information Technology
132
Dairy Technology
167
Leather Technology
133
168
Life Sciences
134
169
Manufacturing Engineering
135
Economics
170
Marine Engineering
11
Code
No.
Code
No.
Discipline
Discipline
171
Marine Biology
197
Printing Technology
172
198
173
199
Polymer Chemistry
174
Mechanical Engineering
200
175
201
176
Mechatronics
202
177
Medical Physics
203
Software Engineering
178
Medical Electronics
204
Statistics
179
Metallurgy
205
Telecommunication Engineering
180
Microbiology
206
Textile Chemistry
181
Mining Engineering
207
182
208
183
209
184
Petro-Chemicals
210
Geomatics
185
Petroleum Refining
211
186
212
187
213
Applied Physics
188
214
Rubber Technology
189
Pharmacy
215
190
Physics
216
Control Engineering
191
Planning
217
Industrial Chemistry
192
218
Metallurgical Engineering
193
Polymer
219
194
Polymer Science
220
195
221
196
500
* Equivalency Certificate should be obtained from the Director, Centre for Academic Courses, Anna University,
Chennai 600 025.
12
10.
11.
ii
iii
Qualifying Degree certificate, provisional certificate and mark sheets of all semesters
or Consolidated mark sheet. (Copy of both sides should be furnished)
iv
Valid GATE 2015 score card for GATE (Engineering / Technology) category.
vi
Valid GATE 2015 score card and TANCET 2015 hall ticket for
GATE (Engineering Science-XE / Life Science -XL) category.
vii
TANCET 2015 hall ticket for TANCET category and for Sponsored full-time category.
viii
ix
x
xi
xii
13
12.
REGISTRATION FEE
A demand draft for Rs. 500/- (Rs. 250/- for SC/SCA/ST candidates belonging to Tamil Nadu)
drawn in favour of The Secretary, TANCA, Anna University payable at Chennai, obtained from
any nationalised bank drawn on or after 21.6.2015, towards the registration fee.
A candidate applying for more than one category has to pay Rs. 500/- (Rs. 250/- for SC/SCA/ST
candidates belonging to Tamil Nadu) for each additional category.
13.
IMPORTANT DATE
Last date for receipt of completed applications: 4.07.2015, by 6.00 p.m.
14.
MAILING ADDRESS
The filled-in applications along with enclosures should be sent to
The Secretary
Tamil Nadu Common Admissions (TANCA)
Anna University
Chennai - 600 025.
Note:
1.
Authorities are not responsible for any postal delay / loss of application in
transit / loss of counselling call letter.
2.
Application registration fee once paid will not be refunded under any
circumstances.
14
Annexure I
Eligibility Qualifications for admission to various
M.E./M.Tech./M.Arch./M.Plan. degree programmes
I. FACULTY OF CIVIL ENGINEERING
Sl.
No.
P.G Programmes
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Eligible Qualifications
B.E. / B.Tech.
1. Civil Engineering
2. Civil and Structural Engineering
B.E. / B.Tech.
1. Civil Engineering
2. Marine Engineering
3. Geo-informatics Engineering
4. Agricultural and Irrigation Engineering
15
Sl.
No.
13.
P.G Programmes
M.E. Environmental Engineering
Eligible Qualifications
B.E. / B.Tech.
1. Civil Engineering
2. Agricultural and Irrigation Engineering
3. Environmental Engineering
4. Chemical Engineering
5. Geo-informatics Engineering
6. B.Tech. (Energy and Environmental Engineering) of Tamilnadu
Agricultural University, Coimbatore.
(or)
B.E. / B.Tech.
7. Mechanical Engineering (sponsored candidates
from Government organizations)
8. Electrical Engineering (with 3 years of relevant
experience) (sponsored candidates
from Government organizations)
14.
15.
16.
17.
18.
B.E. / B.Tech.
1. Civil Engineering
2. Chemical Engineering
3. Geo-informatics Engineering
4. Environmental Engineering
5. B.E./B.Tech. (other branches) with 3 years experience in the
field of Environmental Management / Environmental Engg.
6. B.Tech. (Energy and Environmental Engineering) of
Tamilnadu Agricultural University, Coimbatore
B.E. / B.Tech.
1. Civil Engineering
2. Agricultural and Irrigation Engineering
3. Bio-Technology
4. Industrial Bio-Technology
5. Chemical and Electrochemical Engineering
6. Geo-informatics Engineering
7. Chemical Engineering
8. Mechanical Engineering with 3 years
experience in the field of Environmental
Management / Environmental Engineering
9. Electrical and Electronics Engineering with
3 years experience in the field of Environmental
Management / Environmental Engineering
B.E. / B.Tech.
1. Civil Engineering
2. Agricultural Engineering
3. Agricultural and Irrigation Engineering
16
Sl.
No.
P.G Programmes
Eligible Qualifications
19.
B.E. / B.Tech.
1. Civil Engineering
2. Geo-informatics Engineering
3. Agricultural Engineering
4. Agricultural and Irrigation Engineering
5. B.Tech. (Energy and Environmental Engineering) of
Tamilnadu Agricultural University, Coimbatore.
20.
B.E. / B.Tech.
1. Civil Engineering
2. Geoinformatics
3. Agricultural and Irrigation Engineering
17
P.G. Programmes
2.
3.
4.
5.
6.
7.
8.
Eligible Qualifications
B.E. / B.Tech.
1. Aeronautical Engg.
2. Mechanical Engg.
3. Aerospace Tech.
4. Civil Engg.
5. Mechatronics
B.E. / B.Tech.
1. Mechanical Engg.
2. Aeronautical Engg.
3. Mechatronics
4. Aerospace Tech.
B.E. / B.Tech.
6. Mechatronics
1. Mechanical Engg.
7. Industrial Engg.
2. Aeronautical Engg.
8. Manufacturing Engg./Tech.
3. Production Tech./ Engg.
4. Aerospace Tech.
5. Electronics and Communication Engg.
B.E. / B.Tech.
4. Manufacturing Engg./Tech.
1. Automobile Engg.
5. Mechatronics
2. Mechanical Engg.
3. Production Engg./Tech.
B.E. / B.Tech.
1. Mechanical Engg.
2. Production Engg./Tech.
3. Automobile Engg.
4. Electronics and Communication Engg.
5. Manufacturing Engg./Tech.
6. Mechatronics
7. Electrical and Electronics Engg.
B.E. / B.Tech.
6. Industrial Engg.
1. Mechanical Engg.
7. Metallurgy
2. Production Engg./Tech.
8. Material Science and Engg.
3. Automobile Engg.
4. Manufacturing Engg./Tech. 9. Computer Integrated
Manufacturing
5. Mining Engg.
B.E. / B.Tech.
1. Mechanical Engg.
4. Marine Engg.
2. Aeronautical Engg.
5. Automobile Engg.
3. Production Engg./Tech.
6. Mechanical and Automation
Engg.
B.E. / B.Tech.
6. Metallurgy
1. Mechanical Engg.
7. Industrial Engg.
2. Automobile Engg.
8. Mechatronics
3. Production Engg./Tech.
4. Manufacturing Engg./Tech. 9. Material Science and Engg.
5. Computer Integrated Manufacturing
18
Sl.
No.
P.G Programmes
Eligible Qualifications
B.E. / B.Tech.
6. Industrial Engg
1. Mechanical Engg.
7. Marine Engg.
2. Automobile Engg.
8. Mechatronics
3. Manufacturing
9. Aeronautical Engg.
Engg./Tech.
10. Aerospace Engg.
4. Production Engg./Tech.
5. Aerospace Tech.
B.E. / B.Tech.
5. Industrial Engg.
1. Mechanical Engg.
6. Mechatronics
2. Automobile Engg.
7. Marine Engg.
3. Production Engg./Tech.
8. Aeronautical Engg.
4. Manufacturing Engg./Tech.
B.E. / B.Tech.
1. Mechanical Engg.
2. Energy Engg.
3. Energy and Environmental Engg.
4. Mechanical and Energy Engg.
5. Chemical Engg.
6. Electrical and Electronics Engg.
B.E. / B.Tech.
1. Mechanical Engg.
2. Automobile Engg.
3. Production Engg./Tech.
B.E. / B.Tech.
1. Automobile Engg.
5. Production Engg. / Tech.
2. Mechanical Engg.
6. Aeronautical Engg.
3. Manufacturing
7. Metallurgical Engg.
Engg./Tech.
8. Material Science and Engg.
4. Mechatronics
9.
10.
M.E. CAD/CAM
11.
12.
13.
14.
15.
M.E. Robotics
16.
17.
18.
B.E. / B.Tech.
1. Mechanical Engg.
2. Production Engg./Tech.
3. Automobile Engg.
19.
B.E. / B.Tech.
7. Aeronautical Engg.
1. Industrial Engg.
8. Automobile Engg.
2. Mechanical Engg.
9. Metallurgical Engg.
3. Manufacturing Engg./Tech
10. Mechatronics
4. Production Engg./ Tech.
11. Material Science and Engg.
5. Mining Engg.
6. Printing Tech.
B.E. / B.Tech.
1. Mechanical Engg.
2. Automobile Engg.
3. Mechatronics
4. Marine Engg.
19
4. Manufacturing Engg./Tech.
5. Metallurgy
6. Material Science and Engg.
Sl.
No.
P.G Programmes
20.
21.
M.E Mechatronics
22.
23.
Eligible Qualifications
B.E. / B.Tech.
1. Mechanical Engg.
2. Production Engg./Tech.
3. Automobile Engg.
4. Aerospace Tech.
B.E. / B.Tech.
1. Mechanical Engg.
2. Automobile Engg.
3. Production Engg./Tech.
4. Electronics Engg.
5. Aerospace Tech.
6. Computer Science & Engg.
7. Electrical and Electronics
Engg.
8. Instrumentation and
Control Engg.
5. Industrial Engg.
6. Manufacturing Engg./Tech.
7. Aeronautical Engg.
9. Electronics and
Instrumentation Engg.
10. Electronics and
Communication Engg.
11. Mechatronics
12. Manufacturing Engg./Tech.
13. Instrumentation Engg.
14. Aeronautical Engg.
B.E. / B.Tech.
7.
1. Production Engg./Tech.
8.
2. Automobile Engg.
9.
3. Mechanical Engg.
10.
4. Industrial Engg.
5. Metallurgy
6. Manufacturing Engg./Tech.
B.E. / B.Teh.
1. Aeronautical Engg.
2. Automobile Engg.
3. Civil Engg.
4. Mechanical Engg.
5. Industrial Engg.
6. Electrical and Electronics
Engg.
7. Chemical Engg.
8. Rubber and Plastic Tech.
24.
B.E. / B.Tech.
1. Mechanical Engg.
2. Manufacturing Engg./Tech.
3. Industrial Engg.
4. Printing Tech.
5. Automobile Engg.
25.
B.E. /B.Tech.
1. Mechanical Engg.
2. Automobile Engg.
3. Manufacturing Engg./Tech.
20
Mechatronics
Material Science and Engg.
Rubber and Plastics Tech.
Polymer Engg /Tech.
9. Production Engg./Tech.
10. Manufacturing Engg./Tech.
11. Computer Science and
Engg.
12. Information Technology
13. Electronics and
Instrumentation Engg.
14. Electronics and
Communication Engg.
6. Production Engg./Tech
7. Mechatronics
8. Metallurgy
9. Mining Engg.
10. Material Science and Engg.
4. Production Engg./Tech
5. Industrial Engg.
6. Mechatronics
Sl.
No.
26.
P.G Programmes
M.E. Product Design and
Commerce
Eligible Qualifications
4. Manufacturing Engg./Tech.
5. Industrial Engg.
6. Mechatronics
B.E. / B.Tech.
1. Mechanical Engg.
2. Production Engg./Tech.
3. Automobile Engg.
9.
10.
11.
12.
13.
B.E. / B.Tech.
1. Printing Tech.
2. Mechanical Engg.
3. Manufacturing
Engg./Tech.
4. Production Engg. /
Tech.
5. Chemical Engg. / Tech.
6. Chemical and
Electrochemical Engg.
7. Polymer Engg. / Tech.
8. Plastic Tech.
27.
28.
29.
30.
31.
32.
B.E. / B.Tech.
1. Mechanical Engg.
2. Automobile Engg.
3. Marine Engg.
B.E. / B.Tech.
1. Bio-Technology
2. Chemical Engg.
3. Industrial BioTechnology
4. Electrochemical Engg.
5. Mechanical Engg.
B.E. / B.Tech.
1. Mechanical Engg.
2. Energy Engg.
3. Energy and Environmental Engg.
4. Mechanical and Energy Engg.
5. Electrical and Electronics Engg.
21
Sl.
No.
P.G. Programmes
Eligible Qualifications
33.
B.E. / B.Tech.
1. Mechanical Engg.
2. Production Engg./Tech.
3. Automobile Engg.
4. Aeronautical Engg.
5. Aerospace Tech.
34.
B.E. / B.Tech.
1. Civil Engg.
2. Mechanical Engg.
3. Production Engg./Tech.
4. Automobile Engg.
5. Manufacturing Engg./Tech.
35.
B.E. / B.Tech.
1. Mechanical Engg.
2. Production Engg./Tech.
3. Automobile Engg.
4. Metallurgy
5. Aeronautical Engg.
6. Aerospace Tech.
22
6.
7.
8.
9.
Mechatronics
Marine Engg.
Industrial Engg.
Manufacturing Engg./Tech.
6.
7.
8.
9.
Industrial Engg.
Mechatronics
Computer Science and Engg.
Robotics & Automation
7. Mechatronics
8. Marine Engg.
9. Industrial Engg.
10. Manufacturing Engg./Tech.
11. Material Science and Engg.
P.G. Programmes
Eligible Qualifications
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
B.E. / B.Tech.
1. Electrical and Electronics Engg.
2. Electronics and Communication Engg.
3. Electronics and Instrumentation Engg.
4. Instrumentation and Control Engg.
5. Instrumentation Engg.
6. Electronics Engg.
B.E. / B.Tech.
1. Electrical and Electronics Engg.
B.E. / B.Tech.
1. Electrical and Electronics Engg.
2. Electronics and Communication Engg.
3. Computer Science and Engg.
4. Instrumentation and Control Engg.
5. Electronics and Instrumentation Engg.
6. Information Technology
7. Electronics Engg.
8. Instrumentation Engg.
9. Software Engg.
B.E. / B.Tech.
1. Instrumentation Engg.
2. Electrical and Electronics Engg.
3. Electronics and Instrumentation Engg.
4. Instrumentation and Control Engg.
23
P.G. Programmes
Eligible Qualifications
B.E. / B.Tech.
1. Electrical and Electronics Engg.
2. Electronics and Communication Engg.
3. Electronics Engg.
4. Electronics and Instrumentation Engg.
5. Instrumentation and Control Engg.
6. Instrumentation Engg.
1.
2.
M.E. Avionics
3.
4.
5.
6.
7.
8.
B.E. / B.Tech.
1. Aeronautical Engg.
2. Aerospace Engg./Tech.
3. Electronics Engg.
4. Instrumentation Engg.
5. Electrical and Electronics Engg.
6. Electronics and Communication Engg.
7. Electronics and Instrumentation Engg.
8. Instrumentation and Control Engg.
9. Computer Science and Engg.
10. Information Technology.
B.E. / B.Tech.
1. Biomedical Engg.
2. Computer Science and Engg.
3. Information Technology
4. Electronics and communication Engg.
5. Medical Electronics
B.E. / B.Tech.
1. Electronics and Communication Engg.
2. Electronics Engg.
24
Sl.
No.
9.
P.G Programmes
M.E Communication and
Networking
Eligible Qualifications
B.E/ B.Tech.
1. Electronics Engg.
2. Electronics and Communication Engg.
3. Electronics and Tele-Communication Engg.
13.
14.
15.
B.E. / B.Tech.
1. Electronics and Communication Engg.
2. Information Technology
3. Computer Science and Engg.
4. Computer Hardware and Software
5. Software Engineering
6. Electronics Engg.
18.
B.E. / B.Tech.
1. Electronics and Communication Engg.
2. Electronics Engg.
3. Computer Science and Engg.
4. Information Technology
5. Software Engineering
B.E./ B.Tech.
1. Electronics and Communication Engg.
2. Electrical and Electronics Engg.
3. Electronics Engg.
4. Electronics and Instrumentation Engg.
5. Instrumentation and Control Engg.
6. Instrumentation Engg.
M.Sc.
7. Electronics
8. Physics
9. Material Science
25
Sl.
No.
P.G Programmes
20.
Eligible Qualifications
B.E/ B.Tech.
1. Electronics and Communication Engg.
2. Electronics Engg.
3. Instrumentation and Control Engg.
4. Electronics and Instrumentation Engg.
5. Instrumentation Engg.
6. Biomedical Engg.
7. Biomedical Instrumentation Engg.
8. Medical Electronics
9. Electrical and Electronics Engg.
B.E. / B.Tech.
1. Electronics and Communication Engg.
2. Information Technology
3. Computer Science and Engg.
4. Software Engineering
M.Sc. (5 years integrated)
5. Information Technology
6. Computer Science
7. Software Engineering
B.Sc. (3 years) in Information Technology / Computer
Science and M.Sc. (2 years) in Information
Technology
/ Computer Science
M.C.A (10+2+3+3) years Pattern
M.C.A Lateral
Entry (2 Years) after 10+2+3 Years
degree in B.C.A or B.Sc. (Information Technology /
Computer Science)
21.
B.E. / B.Tech.
1. Aeronautical Engg.
2. Mechanical Engg.
3. Aerospace Engg.
4. Electrical and Electronics Engg.
6. Electronics and Communication Engg.
7. Electronics and Instrumentation Engg.
8. M.Sc. (Physics)
B.E. / B.Tech.
1. Electrical and Electronics Engg.
2. Electronics and Communication Engg.
3. Information Technology
4. Computer Science and Engg.
5. Electronics Engg.
6. Software Engineering
26
Sl.
No.
P.G Programmes
Eligible Qualifications
B.E. / B.Tech.
1. Electronics and Communication Engg.
2. Electrical and Electronics Engg.
3. Electronics Engg.
4. Instrumentation Engg.
5. Electronics and Instrumentation Engg.
6. Instrumentation and Control Engg.
7. Computer Science and Engg.
8. Information Technology
B.E. / B.Tech.
1. Electronics and Communication Engg.
2. Tele Communication Engg.
3. Electronics Engg.
4. Computer Science and Engg.
5. Information Technology
6. Electrical and Electronics Engg.
7. Electronics and Instrumentation Engg.
8. Software Engineering
B.E. / B.Tech.
1. Electronics and Communication Engg.
2. Tele-communication Engg.
3. Electronics Engg.
4. Computer Science and Engg.
5. Information Technology
6. Software Engineering
26.
B.E. / B.Tech.
1. Electrical and Electronics Engg.
2. Electronics and Communication Engg.
3. Information Technology
4. Computer Science and Engg.
5. Electronics Engg.
6. Software Engineering
27
V. FACULTY OF TECHNOLOGY
Sl.
No.
P.G. Programmes
1.
2.
M.Tech. Bio-Technology
3.
M.Tech. Bio-Pharmaceutical
Technology
Eligible Qualifications
B.E. / B.Tech.
1. Textile Engg./Tech.
2. Textile Chemistry
3. Fashion Tech.
4. Leather Tech.
5. Apparel Tech.
M.Sc.
B.E. / B.Tech.
12. Bio-Chemistry
1. Chemical Engg.
13. Micro-Biology
2. Leather Tech.
14. Bio-Physics
3. Genetic Engg./Tech.
15. Bio-Technology
4. Bio-Chemical Engg./Tech.
16. Genetics
5. Industrial Bio-Technology
6. Petroleum Engg./Tech.
17. B.Pharm.
7. Bio-Technology
8. Petrochemicals Engg./Tech.
9. Agricultural Bio-Technology
10.Petroleum Refining & Petro Chemicals Engg.
11.Chemical and Electrochemical Engg.
B.E. / B.Tech.
1. Chemical Engg.
2. Bio- Technology
3. Industrial BioTechnology
4. Biomedical Engg.
5. Bio Engineering
6. Pharmaceutical Engg./Tech.
7. Biochemical Engg./Tech.
8. Biopharmaceutical Engg./Tech.
M.Sc.
9. Biochemistry
10. Microbiology
11. Genetic Engineering
12. Bio Technology
13. Genetics and Molecular Biology
14.B.Pharm.
4.
B.E. / B.Tech.
1. Chemical Engg.
2. Electro-Chemical Engg.
3. Pharmaceutical Engg./Tech.
4. Petroleum Engg./Tech.
5. Food Technology
6. Food Processing Engg./Tech.
7. Petrochemicals Engg./Tech.
8. Petroleum Refining & Petrochemicals Engg.
9. Chemical and Electrochemical Engg.
28
Sl.
No.
P.G. Programmes
5.
6.
7.
M.Tech. Electro-Chemical
Engineering
8.
Eligible Qualifications
B.E. / B.Tech.
1. Chemical Engg.
2. Ceramic Engg./Tech.
3. Metallurgy
4. Petroleum Engg./Tech.
5. Petrochemicals Engg./Tech.
6. Petroleum Refining &
Petrochemicals Engg.
7. Ceramic & Cement
Technology
8. Chemical and
electrochemical Engg.
9. Material Science and Engg.
10. Mechanical Engg
M.Sc.
11. Physics
12. Applied Physics
13. Chemistry
14. Applied Chemistry
15. Material Science
B.E. / B.Tech.
1. Chemical Engg.
2. Industrial Bio-Technology
3. BioTechnology
4. Petroleum Engg./Tech.
5. Petrochemicals Engg./Tech.
6. Chemical & Electro Chemical Engg.
7. Petroleum Refining & Petro Chemicals Engg.
8. B.Tech.(Energy and Environmental Engineering)
of Tamilnadu Agricultural University, Coimbatore.
B.E. / B.Tech.
1. Chemical Engg.
2. Chemical and Electrochemical Engg.
3. Petroleum Engg./Tech.
4. Petrochemicals Engg./Tech.
5. Petroleum Refining & Petro Chemicals Engg.
B.E. / B.Tech.
1. Food Technology
2. Bio-Technology
3. Pharmaceutical Tech./Engg.
4. Chemical Engg.
5. Mechanical Engg.
6. Agricultural Engg.
7. Dairy Technology
8. Industrial Bio-Technology
9. Chemical and
Electrochemical Engg.
29
M.Sc.
10. Food Science &
Nutrition
11. Biotechnology
12. Biochemistry
13. Microbiology
14. Horticulture
15. Fisheries Science
Sl.
No.
P.G. Programmes
Eligible Qualifications
B.E. / B.Tech.
1. Leather Tech.
2. Mechanical Engg.
3. Industrial Engg.
4. Production Engg./Tech.
9.
10.
11.
B.E. / B.Tech.
1. Leather Technology
2. Bio-Technology
12.
B.E. / B.Tech.
1. Mechanical Engg.
2. Ceramic Tech.
3. Engineering Physics
4. Bio-Technology
5. Industrial Bio-Technology
6. Chemical Engg.
7. Biomedical Engg.
8. Agricultural Bio-Technology
9. Bio-Informatics
10. Electrical and Electronics
Engg.
11. Electronics and
Communication Engg.
12. Chemical and
Electrochemical Engg.
13. Materials Science and Engg.
B.E. / B.Tech.
1. Chemical Engg.
2. Leather Tech.
13. Nano Science and Tech.
3. Textile Engg./Tech.
14. Petroleum Engg. and Tech.
4. Apparel Tech.
15. Mechanical Engg.
5. Ceramic Tech.
16. Industrial Engg.
6. Bio-Technology
17. Material Science and Engg.
7. Environmental
18. Manufacturing Engg./Tech.
Engg./Tech.
19. Production Engg./Tech.
8. Rubber and Plastics Tech.
20. Civil Engg.
9. Polymer Tech.
21. Electrical Engg.
10. Food Technology
11. Pharmaceutical Tech./
M.Sc. (any branch of Chemistry)
Engg.
12. Petroleum Refining and
Petro Chemical Engg.
30
M. Sc.
3. Chemistry
4. Applied Chemistry
5. Environmental Chemistry
6. Bio-Technology
14.
15.
16.
17.
18.
19.
20.
Physics
Material Science
Chemistry
Applied Chemistry
Bio Chemistry
Bio-Technology
B.Pharm.
Sl.
No.
P.G. Programmes
Eligible Qualifications
13.
B.E. / B.Tech.
1. Chemical Engg.
2. Petroleum Refining & Petro Chemical Engg.
3. Petroleum Engg./Tech.
4. Chemical and Electrochemical Engg.
14.
B.E. / B.Tech.
1. Mechanical Engg.
2. Chemical Engg.
3. Production Engg./Tech.
4. Polymer Tech.
5. Petroleum Engg./Tech.
6. Petro-Chemicals Engg./Tech.
7. Petroleum Refining Engg.
8. Chemical and Electrochemical Engg.
9. Rubber and Plastic Tech.
10.Textile Engg./Tech.
11.Plastics Technology
12.Rubber Technology
M.Sc.
13.Polymer Science
14.Chemistry with polymer specialisation
15.Applied Chemistry
15.
B.E / B.Tech.
1. Polymer Tech.
2. Chemical Engg.
3. Plastic Tech.
4. Textile Engg./Tech.
5. Rubber and Plastic Tech.
6. Chemical and
Electrochemical Engg.
7. Material Science and Engg.
8. Mechanical Engg
9. Manufacturing Engg.
10.Electrical and Electronics
Engg.
11.Production Engg./Tech.
M.Sc.
12. Polymer Science/Chemistry
13. Material Science
14. Applied Chemistry
15. Chemistry
16. Industrial Chemistry
B.E. / B.Tech.
1. Rubber and/or Plastic Tech. M.Sc.
9. Chemistry
2. Polymer Tech.
10. Applied Chemistry
3. Mechanical Engg.
11. Polymer Chemistry
4. Chemical Engg.
5. Material Science and Engg. 12. Material Science
6. Automobile Engg.
7. Production Engg./Tech.
8. Chemical and Electrochemical Engg.
31
Sl.
No.
P.G. Programmes
Eligible Qualifications
17.
B.E. / B.Tech.
1. Textile Engg./Tech.
2. Textile Chemistry
3. Apparel Technology
4. Fashion Technology (Textile Technology)
18.
B.E. / B.Tech.
1. Textile Chemistry
2. Textile Technology
3. Polymer Technology
M.Sc.
4. Applied Chemistry
5. Textile Chemistry
6. Chemistry
B.E. / B.Tech.
1. Chemical Engg.
2. Electrical and Electronics Engg.
3. Electronics and Instrumentation Engg.
4. Instrumentation and Control Engg.
5. Control Engg.
32
2.
P.G. Programmes
Eligible Qualification
M.Arch
M.Arch Digital Architecture
B.Arch. / AIIA*
3.
M.Arch. Environmental
Architecture
4.
5.
6.
M.Plan.
1. B.Arch.
2. B.E. (Civil Engineering) Subject to the condition that they will
not be eligible for registration as Architects under the
Architects Act 1972 with the Council of Architecture.
3. AIIA*
1. B.Plan.
2. B.Arch.
3. B.E (Civil)
4. AIIA*
M.A./ M.Sc.
i) Geography
ii) Economics
iii) Sociology
iv) Social Work with Community development specialisation
and Rural Development
* Candidates who have qualified as AIIA with registration prior to 2002 with COA
Registration are eligible.
Note: Admission shall be offered only to the candidates who possess the qualification prescribed above
against each programme.
DISCLAIMER
Only candidates with both B.E./B.Tech. and M.E./M.Tech. in relevant subject are
eligible for faculty position in Engineeering and Technology as per AICTE norms.
33
ANNEXURE II
LIST OF COMMUNITIES
Code I. SCHEDULED TRIBES IN TAMIL NADU
No.
1 Adiyan
2 Aranadan
3 Eravallan
4 Irular
5 Kadar
6 Kammara (excluding Kanyakumari District and
Shenkottah Taluk of Tirunelveli District)
7 Kanikaran, Kanikkar (in Kanyakumari District and
Shenkottah Taluk of Tirunelveli District)
8 Kaniyan, Kanyan
9 Kattunayakan
10 Kochu Velan
11 Konda Kapus
12 Kondareddis
13 Koraga
14 Kota (excluding Kanyakumari District and
Shenkottah Taluk of Tirunelveli District)
15 Kudiya, Melakudi
16 Kurichchan
17 Kurumbas (in the Nilgiris District)
18 Kurumans
19 Maha Malasar
20 Malai Arayan
21 Malai Pandaram
22 Malai Vedan
23 Malakkuravan
24 Malasar
25 Malayali
(in
Dharmapuri,
North
Arcot,
Pudukkottai, Salem, South Arcot and Tiruchirapalli
Districts)
26 Malayakandi
27 Mannan
28 Mudugar, Muduvan
29 Muthuvan
30 Pallayan
31 Palliyan
32 Palliyar
33 Paniyan
34 Sholaga
35 Toda (excluding Kanyakumari District and
Shenkottah Taluk of Tirunelveli District)
36 Uraly
34
Code
II. SCHEDULED CASTES IN TAMIL NADU
No.
2 Adi Dravida
3 Adi Karnataka
4 Ajila
6 Ayyanavar (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
7 Baira
8 Bakuda
9 Bandi
10 Bellara
11 Bharatar (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
13 Chalavadi
14 Chamar, Muchi
15 Chandala
16 Cheruman
17 Devendrakulathan
18 Dom, Dombara, Paidi, Pano
19 Domban
20 Godagali
21 Godda
22 Gosargi
23 Holeya
24 Jaggali
25 Jambuvulu
26 Kadaiyan
27 Kakkalan (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
28 Kalladi
29 Kanakkan, Padanna (in the Nilgiris District)
30 Karimpalan
31 Kavara (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
32 Koliyan
33 Koosa
34 Kootan, Koodan (in Kanyakumari District and
Shenkottah Taluk of Tirunelveli District)
35 Kudumban
36 Kuravan, Sidhanar
39 Maila
40 Mala
41 Mannan (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
42 Mavilan
43 Moger
44 Mundala
45 Nalakeyava
Code
No.
46 Nayadi
47 Padannan (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
49 Pallan
50 Pulluvan
51 Pambada
52 Panan (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
53 Panchama
54 Pannadi
55 Panniandi
56 Paraiyan, Parayan, Sambavar
57 Paravan (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
58 Pathiyan (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
59 Pulayan, Cheramar
60 Puthirai Vannan
61 Raneyar
62 Samagara
63 Samban
64 Sapari
65 Semman
66 Thandan (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
68 Tiruvalluvar
69 Vallon
70 Valluvan
71 Vannan (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
72 Vathiriyan
73 Velan
74 Venganur Adi-Dravidar (in Vellore Dist.)
75 Veppur Parayan (in Cuddalore District)
76 Vetan (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
77 Vettiyan
78 Vettuvan (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
II (A) SCHEDULED CASTES ARUNTHATHIYARS
IN TAMIL NADU
1
5
12
37
38
48
67
Adi Andhra
Arunthathiyar
Chakkiliyan
Madari
Madiga
Pagadai
Thoti
35
Code
No.
26 Vanniakula Kshatriya (including Vanniyar,
Vanniya, Vannia Gounder, Gounder or Kander,
Padayachi, Palli & Agnikula Kshatriya)
27 Paravar (except in Kanyakumari District and
Shenkottah Taluk of Tirunelveli District where the
Community is Scheduled Caste)
27A Paravar converts to Christianity including the
Paravar converts to Christianity of Kanyakumari
District and Shenkottah Taluk in Tirunelveli
District)
28 Meenavar
(Parvatharajakulam,
Pattanavar,
Sembadavar) (including converts to Christianity)
29 Mukkuvar or Mukayar (including converts to
Christianity)
30 Punnan Vettuva Gounder
31 Pannayar (other than Kathikarar in Kanyakumari
District)
32 Sathatha Srivaishnava (including Sathani, Chattadi
and Chattada Srivaishnava)
33 Sozhia Chetty
34 Telugupatty Chetty
35 Thottia Naicker (including Rajakambalam,
Gollavar, Sillavar, Thockalavar, Thozhuva Naicker
and Erragollar)
36 Thondaman
36A Thoraiyar (Nilgiris)
36B Thoraiyar (Plains)
37 Valaiyar (including Chettinad Valayars)
38 Vannar (Salaivai Thozhilalar) (including Agasa,
Madivala, Ekali, Rajakula, Veluthadar & Rajaka)
(except in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District where the Community
is a Scheduled Caste)
39 Vettaikarar
40 Vettuva Gounder
41 Yogeeswarar
III (B) LIST OF DENOTIFIED COMMUNITIES
36
Code
No.
47 Boyas (Tiruchirapalli, Karur, Perambalur,
Pudukkottai, The Nilgiris, Salem, Namakkal,
Dharmapuri and Krishnagiri Districts)
48 Battu Turkas
49 C.K. Koravars (Cuddalore and Villupuram Districts)
50 Chakkala
(Sivaganga,
Virudhunagar,
Ramanathapuram,
Thanjavur,
Nagapattinam,
Thiruvarur, Pudukkottai, Tiruchirapalli, Karur,
Perambalur, Madurai, Theni, Dindigul and the
Nilgiris Districts)
51 Changyampudi
Koravars
(Vellore
and
Thiruvannamalai Districts)
52 Chettinad Valayars (Sivaganga, Virudhunagar and
Ramanathapuram Districts)
53 Dombs (Pudukkottai, Tiruchirapalli, Karur and
Perambalur Districts)
54 Dobba Koravars (Salem and Namakkal Districts)
55 Dommars (Thanjavur, Nagapattinam, Thiruvarur,
Pudukkottai, Vellore and Thiruvannamalai Districts)
56 Donga Boya
57 Donga Ur. Korachas
58 Devagudi Talayaris
59 Dobbai Korachas (Tiruchirapalli, Karur Perambalur
and Pudukkottai Districts)
60 Dabi
Koravars
(Thanjavur,
Nagapattinam,
Thiruvarur, Tiruchirapalli, Karur, Perambalur,
Pudukkottai, Vellore and Thiruvannamalai Districts)
61 Donga
Dasaris
(Kancheepuram,
Tiruvallur,
Tiruchirapalli, Karur, Perambalur, Pudukkottai,
Chennai, Salem and Namakkal Districts)
62 Gorrela Dodda Boya
63 Gudu Dasaris
64 Gandarvakottai Koravars (Thanjavur, Nagapattinam,
Thiruvarur, Tiruchirapalli, Karur, Perambalur,
Pudukkottai, Cuddalore and Villupuram Districts)
65 Gandarvakottai Kallars (Thanjavur, Nagapattinam,
Thiruvarur and Pudukkottai Districts)
66 Inji Koravars (Thanjavur, Nagapattinam, Thiruvarur,
Tiruchirapalli, Karur, Perambalur and Pudukkottai
Districts)
67 Jogis
(Kancheepuram,
Tiruvallur,
Chennai,
Cuddalore,
Villupuram,
Vellore
and
Thiruvannamalai Districts)
68 Jambavanodai
Code
No.
69 Kaladis
(Sivaganga,
Virudhunagar,
Ramanathapuram, Madurai, Theni, Dindigul,
Thanjavur, Nagapattinam, Thiruvarur, Pudukkottai,
Tiruchirapalli, Karur and Perambalur Districts)
70 Kal
Oddars
(Kancheepuram,
Thiruvallur,
Ramanathapuram,
Sivaganga,
Virudhunagar,
Madurai, Theni, Dindigul, Pudukkottai, Thanjavur,
Nagapattinam, Tiruvarur, Tiruchirapalli, Karur,
Perambalur, Tirunelveli, Thoothukudi, Salem and
Namakkal Districts)
71 Koravars
(Kancheepuram,
Tiruvallur,
Ramanathapuram,
Sivaganga,
Virudhunagar,
Pudukkottai, Thanjavur, Nagapattinam, Thiruvarur,
Tiruchirapalli, Karur, Perambalur, Tirunelveli,
Thoothukudi, Chennai, Madurai, Theni, Dindigul
and The Nilgiris Districts)
72 Kalinji Dabikoravars (Thanjavur, Nagapattinam,
Tiruvarur and Pudukkottai Districts)
73 Kootappal
Kallars
(Tiruchirapalli,
Karur,
Perambalur and Pudukkottai Districts)
74 Kala
Koravars
(Thanjavur,
Nagapattinam,
Thiruvarur, Tiruchirapalli, Karur, Perambalur and
Pudukkottai Districts)
75 Kalavathila Boyas
76 Kepmaris
(Kancheepuram,
Tiruvallur,
Pudukkottai, Tiruchirapalli, Karur and Perambalur
Districts)
77 Maravars (Thanjavur, Nagapattinam, Thiruvarur,
Pudukkottai,
Ramanathapuram,
Sivaganga,
Virudhunagar, Tirunelveli and Thoothukudi
Districts)
78 Monda Koravars
79 Monda Golla (Salem and Namakkal Districts)
80 Mutlakampatti (Tiruchirapalli, Karur, Perambalur
and Pudukkottai Districts)
81 Nokkars (Tiruchirapalli, Karur, Perambalur and
Pudukkottai Districts)
82 Nellorepet Oddars (Vellore and Thiruvannamalai
Districts)
83 Oddars (Thanjavur, Nagapattinam, Thiruvarur,
Tiruchirapalli, Karur, Perambalur, Pudukkottai,
Madurai, Theni and Dindigul Districts)
84 Pedda Boyas (Tiruchirapalli, Karur, Perambalur
and Pudukkottai Districts)
85 Ponnai Koravars (Vellore and Thiruvannamalai
Districts)
86 Piramalai Kallars (Sivagangai, Virudhunagar,
Ramanathapuram, Madurai, Theni, Dindigul,
Pudukkottai, Thanjavur, Nagapattinam and
Thiruvarur Districts)
37
Code
No.
87 Periya Suriyur Kallars (Tiruchirapalli, Karur,
Perambalur, and Pudukkottai Districts)
88 Padayachi (Vellayan Kuppam in Cuddalore District
and Tennore in Tiruchirapalli District)
89 Punnan Vettuva Gounder (Tiruchirapalli, Karur,
Perambalur and Pudukkottai Districts)
90 Servai (Tiruchirapalli, Karur, Perambalur and
Pudukkottai Districts)
91 Salem Melnad Koravars (Madurai, Theni, Dindigul,
Coimbatore, Erode, Pudukkottai, Tiruchirapalli,
Karur, Perambalur, Salem, Namakkal, Vellore and
Thiruvannamalai Districts)
92 Salem Uppu Koravars (Salem and Namakkal Dist.)
93 Sakkaraithamadai
Koravars
(Vellore
and
Thiruvannamalai districts)
94 Saranga Palli Koravars
95 Sooramari Oddars (Salem and Namakkal Districts)
96 Sembanad Maravars (Sivaganga, Virudhunagar and
Ramanathapuram Districts)
97 Thalli Koravars (Salem and Namakkal Districts)
98 Telungapatti
Chettis
(Tiruchirapalli,
Karur,
Perambalur and Pudukkottai Districts)
99 Thottia Naickers (Sivaganga, Virudhunagar,
Ramanathapuram,
Kancheepuram,
Tiruvallur,
Thanjavur,
Nagapattinam,
Thiruvarur,
Tiruchirapalli, Karur, Perambalur. Pudukkottai,
Tirunelveli, Thoothukudi, Salem, Namakkal,
Vellore,
Thiruvannamalai, Coimbatore & Erode
Districts)
100 Thogamalai Koravars or Kepmaris (Tiruchirapalli,
Karur, Perambalur and Pudukkottai Districts)
101 Uppukoravars or Settipalli Koravars (Thanjavur,
Nagapattinam, Thiruvarur, Pudukkottai, Madurai,
Theni, Dindigul, Vellore and Thiruvannamalai Dist.)
102 Urali Gounders (Tiruchirapalli, Karur, Perambalur
and Pudukkottai Districts)
103 Wayalpad or Nawalpeta Korachas
104 Vaduvarpatti Koravars (Madurai, Theni, Dindigul,
Ramanathapuram,
Sivaganga,
Virudhunagar,
Tirunelveli, Thoothukudi, Tiruchirapalli, Karur,
Perambalur and Pudukkottai Districts)
105 Valayars (Madurai, Theni, Dindigul, Tiruchirapalli,
Karur, Perambalur, Pudukkottai, Erode and
Coimbatore Districts)
106 Vettaikarar (Thanjavur, Nagapattinam, Thiruvarur
and Pudukkottai Districts)
107 Vetta koravars (Salem and Namakkal District)
108 Varaganeri Koravars (Tiruchirapalli, Karur,
Perambalur and Pudukkottai Districts)
109 Vettuva Gounder (Tiruchirapalli, Karur, Perambalur
and Pudukkottai Districts)
Code
No.
1 Agamudayar including Thozhu or Thuluva Vellala
2 Agaram Vellan Chettiar
3 Alwar, Azhavar and Alavar (in Kanyakumari
District and Shenkottah Taluk of Tirunelveli
District)
4 Servai (except Tiruchirappalli, Karur, Perambalur
and Pudukkottai Districts)
5 Nulayar (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
6 Archakarai Vellala
7 Aryavathi (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
8 Ayira Vaisyar
9 Badagar
10 Billava
11 Bondil
12 Boyas (except Tiruchirappalli, Karur, Perambalur,
Pudukkottai, The Nilgiris, Salem, Namakkal,
Dharmapuri and Krishnagiri Districts)
Pedda Boyar (except Tiruchirappalli,
Perambalur and Pudukkottai Districts)
Karur,
Oddars
(except
Thanjavur,
Nagapattinam,
Thiruvarur,
Tiruchirappalli, Karur, Perambalur,
Pudukkottai, Madurai, Theni and Dindigul
Districts) Kaloddars (except Kancheepuram,
Tiruvallur,
Ramanathapuram,
Sivaganga,
Virudhunagar,
Madurai,
Theni,
Dindigul,
Pudukkottai, Tiruchirappalli, Karur, Perambalur,
Tirunelveli, Thoothukudi, Salem & Namakkal
Districts) Nellorepet Oddars (except Vellore and
Thiruvannamalai Districts) Sooramari Oddars
(except Salem and Namakkal Districts)
13 Chakkala (except Sivaganga, Virudhunagar,
Ramanathapuram,
Thanjavur,
Nagapattinam,
Thiruvarur, Pudukkottai, Tiruchirappalli, Karur,
Perambalur, Madurai, Theni, Dindigul and The
Nilgiris Districts)
14 Chavalakarar (in Kanyakumari District and
Shenkottah Taluk of Tirunelveli District)
15 Chettu or Chetty (including Kottar Chetty, Elur
Chetty, Pathira Chetty, Valayal Chetty, Pudukadai
Chetty) (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
38
Code
No.
16 Chowdry
16A Converts to Christianity from Scheduled Castes
irrespective of the generation of conversion (except
the Paravar converts to Christianity of Kanyakumari
District and Shenkottah Taluk of Tirunelveli
District)
16B C.S.I. formerly S.I.U.C. (in Kanyakumari District
and Shenkottah Taluk of Tirunelveli District)
17 Donga Dasaris (except Kancheepuram Tiruvallur,
Tiruchirapalli, Karur, Perambalur, Pudukkottai,
Chennai, Salem and Namakkal Districts)
18 Devangar, Sedar
19 Dombs (except Pudukkottai, Tiruchirapalli, Karur
and Perambalur Districts) Dommars (except
Thanjavur, Nagapattinam, Tiruvarur, Pudukkottai,
Vellore and Thiruvannamalai Districts)
20 Enadi
21 Ezhavathy (in Kanyakumari Districts and
Shenkottah Taluk of Tirunelveli District)
22 Ezhuthachar (in Kanyakumari District and
Shenkottah Taluk of Tirunelveli District)
23 Ezhuva (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
24 Gangavar
25 Gavara, Gavarai & Vadugar (Vaduvar) (other than
Kamma, Kapu, Balija & Reddi)
26 Gounder
27 Gowda (including Gammala, Kalali and Anuppa
Gounder)
28 Hegde
29 Idiga
30 Illathu Pillaimar, Illuvar, Ezhuvar & Illathar
31 Jhetty
32 Jogis (except Kancheepuram, Tiruvallur, Madurai,
Theni, Dindigul, Cuddalore, Villupuram, Vellore
and Thiruvannamalai Districts)
33 Kabbera
34 Kaikolar, Sengunthar
35 Kaladi
(except
Sivaganga,
Virudhunagar,
Ramanathapuram, Madurai, Theni, Dindigul,
Thanjavur, Nagapattinam, Thiruvarur, Pudukkottai,
Tiruchirapalli, Karur and Perambalur Districts)
36 Kalari Kurup including Kalari Panicker (in
Kanyakumari District and Shenkottah Taluk of
Tirunelveli District)
37 Kalingi
Code
No.
38 Kallar
Easanattu Kallar
Gandharvakottai Kallars (except Thanjavur,
Nagapattinam, Thiruvarur and Pudukkottai
Districts)
Kottappal
Kallars
(except
Pudukkottai,
Tiruchirapalli, Karur and Perambalur Districts)
Piramalai
Kallars
(except
Sivaganga,
Virudhunagar, Ramanathapuram, Madurai, Theni,
Dindigul, Pudukkottai, Thanjavur, Nagapattinam
and Thiruvarur Districts) Periyasooriyur Kallars
(except Tiruchirapalli, Karur, Perambalur and
Pudukkottai Districts)
39 Kallar Kula Thondaman
40 Kalveli Gounder
41 Kambar
42 Kammalar
or
Viswakarma,
Viswakarmala
(including Thattar, Porkollar, Kannar, Karumar,
Kollar, Thacher, Kal Thacher, Kamsala and
Viswabrahmin)
43 Kani, Kanisu, Kaniyar Panikkar
44 Kaniyala Vellalar
45 Kannada Saineegar, Kannadiyar (Through out the
State) and Dasapalanjika (Coimbatore, Erode and
the Nilgiris Districts)
46 Kannadiya Naidu
47 Karpoora Chettiar
48 Karuneegar (Seer Karuneegar, Sri Karuneegar,
Sarattu
Karuneegar,
Kaikatti
Karuneegar,
Mathuvazhi Kanakkar, Sozhi Kanakkar &
Sunnambu Karuneegar)
49 Kasukkara Chettiar
50 Katesar Pattamkatti
51 Kavuthiyar
52 Kerala Mudali
53 Kharvi
54 Khatri
55 Kongu Vaishnava
56 Kongu Vellalars (including Vellala Gounder, Nattu
Gounder, Narambukatti Gounder, Tirumudi
Vellalar, Thondu Vellalar, Pala Gounder, Poosari
Gounder, Anuppa Vellala Gounder, Padaithalai
Gounder, Chendalai Gounder, Pavalankatti Vellala
Gounder, Palla Vellala Gounder, Sanku Vellala
Gounder, & Rathinagiri Gounder)
57 Koppala Velama
58 Koteyar
39
Code
No.
59 Krishnanvaka (in Kanyakumari District and
Shenkottah Taluk of Tirunelveli District)
60 Kudikara Vellalar
61 Kudumbi (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
62 Kuga Vellalar
63 Kunchidigar
63A Latin Catholics except Latin Catholic Vannar in
Kanyakumari District
63B Latin Catholics in Shenkottah Taluk of Tirunelveli
District
64 Lambadi
65 Lingayat (Jangama)
66 Mahratta (NonBrahmin) (including Namadev
Mahratta)
67 Malayar
68 Male
69 Maniagar
70 Maravars (except Thanjavur, Nagapattinam,
Tiruvarur,
Pudukkottai,
Ramanathapuram,
Sivaganga,
Virudhunagar,
Tirunelveli
and
Thoothukudi Districts) (including Karumaravars.
Appanad
Kondayamkottai
Maravar
(except
Sivaganga,
Virudhunagar,
Ramanathapuram,
Madurai, Theni and Dindigul Districts) and
Sambanad
Maravars
(except
Sivaganga,
Virudhunagar and Ramanathapuram Districts)
71 Moondrumandai Enbathunalu (84) Ur. Sozhia
Vellalar
72 Mooppan
73 Muthuraja, Muthuracha, Muttiriyar, Mutharaiyar
74 Nadar, Shanar & Gramani including Christian
Nadar, Christian Shanar and Christian Gramani
75 Nagaram
76 Naikkar (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
77 Nangudi Vellalar
78 Nanjil Mudali (in Kanyakumari District and
Shenkottah Taluk of Tirunelveli District)
79 Odar (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
80 Odiya
81 Oottruvalanattu Vellalar
82 O.P.S. Vellalar
83 Ovachar
84 Paiyur Kotta Vellalar
85 Pamulu
Code
No.
86 Panar (except in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District where the Community is a
Scheduled Caste)
86A Pandiya Vellalar
87 Omitted
88 Kathikarar in Kanyakumari District
89 Pannirandam Chettiar or Uthama Chettiar
90 Parkavakulam
(including
Surithimar
Nathamar,
Malayamar, Moopanar & Nainar)
91 Perike (including Perike Balija)
92 Perumkollar (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
93 Podikara Vellalar
94 Pooluva Gounder
95 Poraya
96 Pulavar (in Coimbatore and Erode Districts)
97 Pulluvar or Pooluvar
98 Pusala
99 Reddy (Ganjam)
100 Sadhu Chetty (including Telugu Chetty Twenty four
manai Telugu Chetty)
101 Sakkaravar or Kavathi (in Kanyakumari District and
Shenkottah Taluk of Tirunelveli District)
102 Salivagana
103 Saliyar, Padmasaliyar, Pattusaliyar, Pattariyar and
Adhaviyar
104 Savalakkarar
105 Senaithalaivar, Senaikudiyar and IIaivaniar
105A Serakula Vellalar
106 Sourashtra (Patnulkarar)
107 Sozhia Vellalar (including Sozha Vellalar. Vetrilaikarar,
Kodikalkarar and Keeraikarar)
108 Srisayar
109 Sundaram Chetty
110 Thogatta Veerakshatriya
111 Tholkollar (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
112 Tholuva Naicker and Vetalakara Naicker
113 Omitted
114 Thoriyar
115 Ukkirakula Kshatriya Naicker
116 Uppara, Uppillia and Sagara
117 Urali Gounder (except Tiruchirapalli Karur, Perambalur
and Pudukkottai Districts) and Orudaya Gounder or
Oorudaya Gounder (in Madurai, Theni, Dindigul,
Coimbatore, Erode, Tiruchirapalli, Karur, Perambalur,
Pudukkottai, Salem and Namakkal Districts)
40
Code
No.
118 Urikkara Nayakkar
118A Virakodi Vellala
119 Vallambar
119A Vallanattu Chettiar
120 Valmiki
121 Vaniyar, Vania Chettiar (including Gandla, Ganika,
Telikula and Chekkalar)
122 Veduvar and Vedar (except in Kanyakumari District and
Shenkottah Taluk of Tirunelveli District where the
Community is a Scheduled Castes)
123 Veerasaiva (in Kanyakumari District and Shenkottah
Taluk of Tirunelveli District)
124 Velar
125 Vellan Chettiar
126 Veluthodathu Nair (in Kanyakumari District and
Shenkottah Taluk of Tirunelveli District)
127 Vokkaligar (including Vakkaligar, Okkaligar, Kappaliyar,
Kappiliya, Okkaliga Gowda, Okkaliya-Gowder, OkkaliyaGowda, Okkaliya Gowda)
128 Wynad Chetty (The Nilgiris District)
129 Yadhava (including Idaiyar, Telugu Speaking Idaiyar
known as Vaduga Ayar or Vaduga Idaiyar or Golla and
Asthanthra Golla)
130 Yavana
131 Yerukula
131A Converts to Christianity from any Hindu Backward
Classes Community or Most Backward Classes
Community (except the Converts to Christianity from
Meenavar, Parvatharajakulam, Pattanavar, Sembadavar,
Mukkuvar or Mukayar and Paravar) or Denotified
Communities
132 Orphans and destitutes children who have
lost their
Parents before reaching the age of ten and are destitutes;
and who have nobody else to take care of them either by
law or custom; and also who are admitted into any of the
Schools or orphanages run by the Government or
recognised by the Government.
Code
No.
1
2
3
4
5
6
7
Ansar
Dekkani Muslims
Dudekula
Labbais including Rowthar and Marakayar (whether
their spoken language is Tamil or Urdu)
Mapilla
Sheik
Syed