P-LINER
P-LINER Basic.
Plastic liner.
The liner of the future.
P-LINER Basic plastic liners are extremely lightweight,
absolutely dimensionally stable and unbreakable. They are
ideally suited for non-pressing and pressing water. The
three-ridge seal, securely integrated on the liner, provides
a reliable seal between the liner and the building, and
enables flush insertion into concrete formwork.
P-LINER Basic plastic liners offer planners and users an
exceptional degree of flexibility. They are extremely
installation-friendly, easy to adapt and employ a tested
sealing principle.
P-LINER Basic plastic liners can be used in masonry work,
concrete and element walls and are excellently suited for
use in enclosed concrete construction. This has been tested
by MPA Dortmund with a pressure seal tightness of 2.5 bar.
P-LINER Basic
the advantages at a glance:
watertight to 2.5 bar
pipe diameters of 100 mm to 1400 mm available
extremely lightweight plastic component
simple installation in concrete formwork
unbreakable
sealed ready for installation
can be readily cut to the desired length
also available in intermediate and custom sizes
Example: KFR 400/500
350 mm diameter
Through-the-wall intelligence.
Liner
inside diameter
(mm)
Liner outside
diameter (mm)
D1
Liner outside
diameter (mm)
D2
Order number
(x=wall thickness
in mm)
150
KFR 100/X
150
0112
160
200
KFR 150/X
200
0162
211
250
KFR 200/X
250
0210
280
320
KFR 250/X
300
0260
314
350
KFR 300/X
350
0310
358
400
KFR 350/X
400
0360
408
450
KFR 400/X
450
0410
458
500
KFR 450/X
500
0450
508
550
KFR 500/X
600
0550
608
650
KFR 600/X
700
0650
708
750
KFR 700/X
800
0750
808
850
KFR 800/X
900
0850
908
950
KFR 900/X
1,000
0940
1,008
1,050
KFR 1000/X
1,100
01,040
1,108
1,150
KFR 1100/X
1,200
01,140
1,208
1,250
KFR 1200/X
1,300
01,240
1,308
1,350
KFR 1300/X
1,400
01,340
1,408
1,450
KFR 1400/X
D2
110
065
D1
100
The information provided in this brochure is based on our existing technical knowledge and experience. Because of the large number of possible influences to which the products can be subjected during handling and in use, the information provided can be used only as a guide. It does not
relieve installation engineers or users of the products from the responsibility of carrying out their own tests and trials. We will replace all parts which are unserviceable due to defective materials. We will not replace parts with faults resulting from transport, storage or incorrect installation.
Whatever your requirements and wishes, we can supply any version to meet your needs.
Fast and affordable. Contact us! We will be happy to advise you personally.
office@hauff-technik.de
www.hauff-technik.de
08 02 01e