Standard
0.8 A Triacs
Main Features
A2
Symbol
Value
Unit
IT(RMS)
0.8
VDRM/VRRM
600
IGT (Q1)
mA
G
A1
A2
Description
A1
TO-92
Z00607MA
Part Number
Marking
Z00607MA 1BA2
Z0607MA
Z00607MA 2BL2
Z0607MA
Z00607MA 5BL2
Z0607MA
Z00607MN 5AA4
Z6M
Parameter
RMS on-state current
(full sine wave)
SOT-223
Ttab = 85 C
TO-92
TL = 50 C
F = 50 Hz
t = 20 ms
F = 60 Hz
t = 16.7 ms
tp = 10 ms
dI/dt
F = 120 Hz
IGM
tp = 20 s
ITSM
It
PG(AV)
Tstg
Tj
April 2007
SOT-223
Z00607MN
Symbol
IT(RMS)
A1
Order Codes
Table 1.
G
A2
A2
G
Value
Unit
0.8
9
A
Rev 8
9.5
0.45
A s
Tj = 110 C
20
A/s
Tj = 110 C
Tj = 110 C
0.1
- 40 to + 150
- 40 to + 110
1/7
www.st.com
Characteristcs
Z00607
Characteristcs
Table 2.
Symbol
Test Conditions
Quadrant
Value
I - II - III
IGT (1)
5
MAX
VD = 12 V RL = 30
IV
VGT
VGD
IH (2)
IT = 200 mA
IL
IG = 1.2 IGT
(dV/dt)c
(2)
mA
7
ALL
MAX
1.3
ALL
MIN
0.2
MX.
mA
I - III - IV
dV/dt (2)
Unit
10
MAX
II
mA
20
MIN
10
V/s
MIN
1.5
V/s
Tj = 110 C
Table 3.
Static characteristics
Symbol
Test Conditions
VTM(1)
ITM = 1.1 A
Vto (1)
Rd
(1)
IDRM
IRRM
tp = 380 s
Value
Unit
Tj = 25 C
MAX.
1.5
Threshold voltage
Tj = 110 C
MAX.
0.95
Dynamic resistance
Tj = 110 C
MAX.
420
0.1
mA
Value
Unit
Tj = 25 C
Tj = 110 C
MAX.
Table 4.
Thermal resistances
Symbol
Parameter
Rth(j-t)
SOT-223
25
Rth(j-I)
TO-92
60
Rth(j-a)
Junction to ambient
C/W
S(1) = 5 cm SOT-223
1.
2/7
60
C/W
TO-92
150
Z00607
Characteristcs
Figure 1.
Figure 2.
P(W)
1.0
2.5
0.9
0.8
2.0
0.7
IGT
0.6
1.5
0.5
IH & IL
1.0
0.4
0.3
0.5
0.2
0.1
Tj (C)
IT(RMS)(A)
0.0
0.0
0.0
0.1
Figure 3.
0.2
0.3
0.4
0.5
0.6
0.7
0.8
-40
-20
20
40
60
80
100
120
ITSM (A)
10
200.0
100.0
Tj initial = 25C
t=20ms
dI/dt limitation:
20A/s
One cycle
ITSM
Non repetitive
Tj initial = 25C
10.0
5
4
Repetitive
Tamb = 25C
1.0
I2t
2
1
tp (ms)
Number of cycles
0
1
10
Figure 5.
0.1
100
0.01
1000
On-state characteristics
(maximum values)
Figure 6.
ITM(A)
0.10
1.00
10.00
10.0
10.0
8.0
6.0
Tj = Tjmax.
1.0
4.0
Tj=max.
Vt0=0.95 V
Rd=420 m
Tj = 25C
2.0
VTM (V)
0.0
0.5
1.0
1.5
2.0
2.5
(dV/dt)c (V/s)
0.0
0.1
3.0
3.5
4.0
4.5
5.0
0.1
1.0
10.0
3/7
Figure 7.
Z00607
Figure 8.
Rth(j-a)(C/W)
130
120
110
100
90
80
70
60
50
40
30
20
10
0
5
4
3
2
1
Tj (C)
0
0
10
20
30
40
50
60
70
80
90
100
110
S(cm)
0.0
0.5
1.0
1.5
2.0
3.0
3.5
Z 006 07 M A
Triac series
Current
006 = 0.8A
Sensitivity
07 = 5mA
Voltage
M = 600V
Package
A = TO-92
N = SOT-223
Packing mode
1BA2 = TO-92 Bulk
2BL2 = TO-92 Ammopack
5BL2 = TO-92 Tape and reel
5AA4 = SOT-223 Tape and reel
4/7
2.5
Blank
1BA2
4.0
4.5
5.0
Z00607
Packaging information
Packaging information
Table 5.
SOT-223 Dimensions
Dimensions
Ref.
V
A
A1
Millimeters
Min.
Typ.
A1
e1
Inches
Max.
Min.
Typ.
Max.
1.80
0.071
0.02
0.10
0.001 0.004
0.60
0.70
0.85
B1
2.90
3.00
3.15
0.24
0.26
0.35
(1)
6.30
6.50
6.70
D
B1
4
H
E
1
2.3
e1
e
0.090
4.6
0.181
E(1)
3.30
3.50
3.70
6.70
7.00
7.30
10 max
1. Do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 0.15mm (0.006inches)
Figure 9.
1.32
5.16
7.80
1.32
2.30
0.95
5/7
Ordering information
Z00607
Table 6.
TO-92 Dimensions
DIMENSIONS
REF.
Millimeters
Min.
Typ.
Inches
Max.
Min.
Typ.
Max.
A
a
B
1.35
4.70
C
F
6/7
0.053
0.185
2.54
0.100
4.40
0.173
12.70
0.500
3.70
0.146
0.50
0.019
Ordering information
Ordering type
Marking
Z00607MA 1BA2
Z0607MA
Z00607MA 2BL2
Z0607MA
Z00607MA 5BL2
Z0607MA
Z00607MN 5AA4
Z6M
Package
TO-92
SOT-223
Weight
0.2 g
0.12 g
Base
quantity
Delivery
mode
2500
Bulk
2000
Ammopack
2000
1000
Revision history
Date
Revision
Description of Changes
Oct-2001
Last update.
25-Mar-2005
21-Jun-2005
13-Sep-2005
12-Apr-2007
Z00607
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (ST) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to STs terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN STS TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USERS OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
7/7