LEARNING OUTCOME:
Demonstrate an ability to design electronic circuits and conduct experiments with electronic systems,
analyze and interpret data.
LEARNING OUTCOME:
Demonstrate proficiency in fault finding and repairing of electronic appliance, exhibit knowledge of
electrical materials, their properties, working principles and solder different components of a circuit
LEARNING OUTCOME:
Apply CMOS technology-specific layout rules in the placement and routing of transistors and
interconnect, and to verify the functionality, timing, power, and parasitic effects.
EMBEDDED C LAB
LEARNING OBJECTIVE:
Enable the students to program, simulate and test the 8051, 8052, PIC16 and ARM processor based
circuits using KEIL,, MPLAB, PROTEUS, MULTISIM softwares and to give the students the
opportunity to build and test the embedded systems.
LEARNING OUTCOME:
Have the knowledge through hands-on experimentation the keil, proteus, multisim tools for embedded
systems as well as the basics of design, simulate and implement the embedded systems using C.
LEARNING OUTCOME:
Design and simulate different biasing circuits and applications of BJT and FET and different
configurations and applications of opamp.
communication system at the block diagram level under certain constraints and requirements.
LEARNING OUTCOME:
Develop the spectral properties of frequency modulation and analyze the demodulated frequencymodulated signals in the presence of noise and develop concept of designing hybrid modulators which
caters the need of communication system.
LEARNING OUTCOME:
Compute the bandwidth and transmission power by analyzing time and frequency domain spectra of
signal required under various modulation schemes and apply suitable modulation schemes and coding for
various applications.
LEARNING OUTCOME:
Understand how to use MATAB to simulate and analyze signal and image processing algorithms and
characterize sampled systems in time and frequency domain.
LEARNING OUTCOME:
Apply concepts of electric network topology: nodes, branches, and loops to solve circuit problems,
including the use of computer simulation(MATLAB)and relate physical observations and measurements
involving electrical circuits to theoretical principles.
LEARNING OUTCOME:
Describe common devices such as microwave vacuum tubes, high-speed transistors and ferrite devicesHandle microwave equipment and make measurements:
LEARNING OUTCOME:
Make basic connections to instrumentation such as power, input signal, voltage measurement, and time
and frequency domain measurements and understand and apply characteristic equations for circuit
components (transistors, resistors) to analyze and design circuits.
LEARNING OUTCOME:
Simplify the logic expressions using Boolean laws and postulates and design them by using logic gates.
LEARNING OBJECTIVE:
LEARNING OUTCOME:
PROJECT LAB
LEARNING OBJECTIVE:
LEARNING OUTCOME: