Function
Use this command to add a 2G neighboring cell.
Note
None
Parameter
Parameter ID
IDTYPE
Index
Type
Unit: None
Source
Cell
Index
Parameter ID
Unit: None
Source
Cell
Name
Unit: None
Parameter ID
Neighb
or 2G
Cell
Index
Unit: None
Neighb
or 2G
Cell
Name
Parameter ID
Unit: None
Source
Cell
MCC
Unit: None
Parameter ID
SRCMNC
Source
Cell
MNC
Unit: None
Source
Cell
LAC
Unit: None
Parameter ID
Source
Cell CI
Unit: None
Neighb
our Cell Meaning: Mobile Country Code (MCC) of a
MCC
neighboring cell
Parameter ID
Unit: None
Neighb
our Cell Meaning: Mobile Network Code (MNC) of a
MNC
neighboring cell
Unit: None
Parameter ID
NBRLAC
Neighb
our Cell Meaning: Local Area Code (LAC) of a
LAC
neighboring cell
Unit: None
Neighb
our Cell Meaning: Cell ID of a neighboring cell
CI
GUI Value Range: 0~65535
Unit: None
Parameter ID
Current
HO
Meaning: Whether the currently used handover
CTRL algorithm in the source cell is HO Algorithm I or
Algorit HO Algorithm II
hm in
Source
Cell
GUI Value Range: HOALGORITHM1(Handover
algorithm I), HOALGORITHM2(Handover
algorithm II)
Unit: None
Parameter ID
Unit: dB
Default Value: 68
Min
Access
Level
Offset
Parameter ID
Default Value: 0
Recommended Value: 0
PBGTMARGIN
PBGT
HO
Meaning: PBGT handovers to a neighboring cell
Thresho are allowed only when the downlink level
ld
difference between the neighboring cell and the
serving cell is larger than this parameter. When
the value of this parameter is smaller than 64,
handovers to a neighboring cell with a lower level
than the current serving cell are allowed.
Unit: dB
Default Value: 68
Parameter ID
BQMARGIN
BQ HO
Margin Meaning: If (downlink level of the neighbor cell
after filtering - downlink level of the serving
cell (after power control compensation)) >
(Inter-cell HO Hysteresis - BQ HO Margin +
64), the BQ handover to the neighbor cell is
triggered.
Unit: dB
Default Value: 69
Recommended Value: 69
ISCHAINNCELL
Chain
Neighb
or Cell
Parameter ID
Unit: None
Default Value: NO
Recommended Value: NO
INTELEVHOHYST
Adjacen
t Cell
Interlayer
HO
Hystere
sis
Parameter ID
Default Value: 67
Recommended Value: 67
DRHOLEVRANGE
Directe
d Retry Meaning: Maximum signal level difference
Handov between the neighbor cell and the serving cell for
er Level triggering directed retry
Range
GUI Value Range: 0~128
Unit: dB
Default Value: 72
Recommended Value: 72
IBCANCELLFLAG
IBCA
Neighb
or Cell
Flag
Parameter ID
Unit: None
Default Value: NO
Recommended Value: NO
IBCADYNCMEASURENCELL IBCA
ALLOWED
Dyn
Measur
e
Neighb
our Cell
Flag
Parameter ID
Unit: None
Default Value: NO
IBCA
RxLev
Offset
Parameter ID
Unit: dB
Default Value: 4
Recommended Value: 4
CHAINNCELLTYPE
Chain
Neighb Meaning: This parameter indicates the
our Cell geographical relationship between the
Type
neighboring cell and the serving cell. In the BSC,
if direction A is selected, then the reverse
direction is B.
Unit: None
Parameter ID
Recommended Value:
QUICK_HO_NCELL_TYPE_A
EDGEADJSTATTIME
Edge
HO
AdjCell
Watch
Time
Unit: s
Default Value: 6
Recommended Value: 6
EDGEADJLASTTIME
Edge
HO
Meaning: According to the P/N rule, if a neighbor
AdjCell cell meets the conditions for selecting the
Parameter ID
Unit: s
Default Value: 4
Recommended Value: 4
LEVSTAT
Layer
HO
Watch
Time
Parameter ID
Unit: s
Default Value: 6
Recommended Value: 6
LEVLAST
Layer
HO
Valid
Time
Unit: s
Default Value: 4
Parameter ID
PBGTSTAT
PBGT
Watch
Time
Unit: s
Default Value: 6
Recommended Value: 6
PBGTLAST
PBGT
Valid
Time
Parameter ID
Unit: s
Default Value: 4
Recommended Value: 4
BETTERCELLSTATTIME
Better
Cell HO Meaning: According to the P/N rule, if the
Watch conditions for the handover to a better cell due to
Time
interference are met for P seconds within N
seconds, the handover is triggered.
This parameter specifies the number N.
Unit: s
Parameter ID
Recommended Value: 6
BETTERCELLLASTTIME
Better
Cell HO Meaning: According to the P/N rule, if the
Valid
conditions for the handover to a better cell due to
Time
interference are met for P seconds within N
seconds, the handover is triggered.
This parameter specifies the number P.
Unit: s
Default Value: 4
Recommended Value: 4
HOSTATICTIME
Quick
Handov Meaning: According to the P/N rule, if the
er Static conditions for fast handover are met in P of N
Time
measurement reports, the handover is triggered.
Parameter ID
Unit: s
Default Value: 4
Recommended Value: 4
HOLASTTIME
Quick
Handov Meaning: According to the P/N rule, if the
er Last conditions for fast handover are met in P of N
Time
measurement reports, the handover is triggered.
This parameter specifies the number P.
Parameter ID
Default Value: 3
Recommended Value: 3
HCSSTATTIME
HCS
HO
Watch
Time
Unit: s
Default Value: 3
Recommended Value: 3
Parameter ID
HCSLASTTIME
HCS
HO
Valid
Time
Unit: s
Default Value: 2
Recommended Value: 2
BQSTATTIME
BQ HO
Watch Meaning: According to the P/N rule, if the
Time
conditions for emergency BQ handover are met in
P of N measurement reports, the handover is
triggered.
This parameter specifies the number N.
Parameter ID
Unit: s
Default Value: 1
Recommended Value: 1
BQLASTTIME
BQ HO
Valid
Meaning: According to the P/N rule, if the
Time
conditions for emergency BQ handover are met in
P of N measurement reports, the handover is
triggered.
This parameter specifies the number P.
Unit: s
Default Value: 1
Parameter ID
TASTATTIME
TA HO
Watch
Time
Unit: s
Default Value: 1
Recommended Value: 1
TALASTTIME
TA HO
Valid
Time
Parameter ID
Unit: s
Default Value: 1
Recommended Value: 1
ULBQSTATTIME
UL BQ
HO
Static
Time
Unit: s
Parameter ID
Recommended Value: 1
ULBQLASTTIME
UL BQ
HO
Last
Time
Unit: s
Default Value: 1
Recommended Value: 1
LOADHOPBGTMARGIN
Load
HO
PBGT
Thresho
ld
Parameter ID
Unit: None
Default Value: 0
Recommended Value: 0
Example
To add a neighboring cell (IDTYPE = Index Type , Source Cell Name = Cell000,
Neighbor 2G Cell Name = cell002;
Inter-cell HO Hysteresis = 50; Min Access Level Offset = 60;
Adjacent Cell Inter-layer HO Hysteresis = 68), run the following command:
ADD G2GNCELL: IDTYPE=BYNAME, SRC2GNCELLNAME="Cell000",
NBR2GNCELLNAME="cell002", INTERCELLHYST=50, MINOFFSET=60, INTELEVHOHYST=68;