Program Description:
"BRGPLT9" is a spreadsheet program written in MS-Excel for the purpose of the analysis and design of beam
bearing plates. This program is applicable to beams supported on concrete walls, pilasters, and piers in an
attempt to distribute the beam reaction over an area sufficient to keep the average bearing pressure within
acceptable limits. Specifically the program will check both the beam web shear and beam end bearing
capacity, determine the required bearing plate thickness, and determine the minimum beam flange
thickness required without a bearing plate.
This program is a workbook consisting of two (2) worksheets, described as follows:
Worksheet Name
Description
Doc
Beam Bearing Plate
"BRGPLT9.xls" Program
Version 1.0
###
###
###
###
###
###
###
###
Input Data:
Beam Size:
Anchor as required
Beam Size =
Design Parameters:
Beam End Reaction, R =
Beam Yield Stress, Fy =
Bearing Plate Length, N =
Bearing Plate Width, B =
Bearing Plate Yield Stress, Fyp =
Concrete Strength, f 'c =
Bearing Area, A2 =
Member Properties:
Beam:
d = 18.000
tw =
0.355
bf =
7.500
tf =
0.570
k = 0.9720
W18x50
49.00
36
10.000
8.000
36
3.000
80.00
kips
ksi
in.
N+2.5*k
Bearing
Plate
d=18
W18x50
k=0.972
in.
tf=0.57
ksi
R=49
ksi.
N=10
in.^2
W18x50
Bearing
Plate
in.
in.
k=0.972
tp=0.79
in.
###
Fp =
n=
Fbp =
tp =
Minimum B
fpf =
Fpf =
nf =
Fbf =
tf(min) =
W40x372
n
n
in.
in.
2k n
n
n
B=8
W40x362
W40x331
W40x328
Results:
Nomenclature
W40x324
W40x321
W40x298
Rv >= R, O.K.
W40x278
W40x235
W40x221
2 of 3
W40x174
W40x167
tf(min) > tf
07/18/2015 00:48:56
"BRGPLT9.xls" Program
Version 1.0
Bearing Plate Is Req'd.
W36x588
3 of 3
07/18/2015 00:48:56