RAD-1 | p. 66
51XBR Series | p. 69
AIS | p. 65
MNST/MST1 | p. 92
Series
Pilla
Electrical
Products, Inc.
869/869STR | p. 67
ST120 Series | p. 90
Pilla Electrical
Products, Inc.
ALARMS &
I N D I C AT I O N
MODEL/SERIES PAGE
Alarm and Indication Stations
AIS Kele Alarm Indication Station. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
RAD-1 Kele Remote Alarm Indication Station . . . . . . . . . . . . . . . . . . . . . . . . 66
Emergency Operator Stations
E-Stop ESB Series Operator Stations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E-Stop ESM Series Emergency Operator Stations. . . . . . . . . . . . . . . . . . . .
E-Stop ESP Series Emergency Operator Stations . . . . . . . . . . . . . . . . . . . .
ST120 Series Operator Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WPS Series Plate Mounted Operator Stations. . . . . . . . . . . . . . . . . . . . . . . .
MNST and MST1 Series Power Control Stations . . . . . . . . . . . . . . . . . . . . .
200 Class | p. 80
ClearView
ESM Series | p. 86
84
86
88
90
91
92
ESP Series | p. 88
67
68
68
69
70
71
72
74
75
Tower Lights
200 Class ClearView LED Stacklight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
TWS Series 75 mm Tower Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
kele.com
NEW!
DESCRIPTION
SEQUENCE OF OPERATION
Upon an alarm contact closure, the LED indicator will light, and the
horn will sound. The horn can be silenced through the alarm silence
switch, while the visual indication will continue to be lighted until the
alarm condition has been corrected. A power interruption or open
alarm contact will reset the AIS.
FEATURES
APPLICATION
WIRING
Four-wire connection
SPECIFICATIONS
Supply Voltage
Contact Rating
AIS-24D
AIS-24A
AIS-120A
Alarm Horn
Dimensions
Mounting
Enclosure
Approvals
Weight
Warranty
Power supply
24 VAC/VDC or 120 VAC
24 VDC, 50 mA min
24 VAC, 90 mA min
120 VAC, 70 mA min
80 db
7.09"H x 4.33"W x 3.54"D
(18.0 x 11.0 x 9.0 cm)
Four screws through back
Polystyrene, impact resistant,
knock-outs
RoHS
1.1 lb (0.5 kg)
1 year
N.C.
AIS internal
terminal strip
Two-wire connection
1
2
N.C.
N.C.
Power supply
24 VAC/VDC or 120 VAC
4
5
N.C.
AIS internal
terminal strip
ORDERING INFORMATION
MODEL DESCRIPTION
AIS
Alarm indication station
12VD 12 VDC powered
24D
24 VDC powered
24A
24 VAC powered
120A 120 VAC powered
AIS
March 2014
24A
WE MAKE IT EASY.
kele.com
888-397-5353 USA
65
NEW!
DESCRIPTION
SEQUENCE OF OPERATION
When 24 VAC or VDC is applied to the RAD-1 through an
alarm-initiating device, the red alarm LED will light, the horn
will sound, and the alarm status relay will energize. If an initial
alarm delay has been set, when 24 VAC or VDC is applied, the
red alarm LED will blink until the delay period has expired. Then
it will light continuously, the horn will sound continuously, and
the relay will energize. If power is interrupted, the RAD-1 will
reset to normal state.
During an alarm (24V applied to the RAD-1), the horn may be
silenced by momentarily pressing the silence switch. The alarm
LED will remain lighted, and the alarm status relay will remain
energized when the horn is silenced until the alarm condition is
cleared (24V removed). If an alarm repeat after silence time has
been set, the horn will re-sound at the end of the repeat time.
If the relay-follows-horn jumper is installed, the alarm status
relay will de-energize when the horn is silenced and re-energize
when the horn sounds at the end of the repeat-after-silence
time.
If a pulsed (instead of continuous tone) horn is desired, the
horn-pulsed jumper may be installed. If both the horn pulsed
jumper and the relay-follow-horn jumper are installed, the alarm
status relay will energize and de-energize with the pulsed horn.
FEATURES
WIRING
No jumper
HORN PULSED
REPEAT TIME x10
DLY TIME x10
Alarm Repeat after
Silence Time*
SW6SW8 OFF = No delay
SW6 ON = 1 minute
SW7 ON = 2 minutes
SW8 ON = 4 minutes
Initial Alarm Delay Time*
SW1SW5 OFF = No delay
SW1 ON = 1 second
SW2 ON = 2 seconds
SW3 ON = 4 seconds
SW4 ON = 8 seconds
SW5 ON = 16 seconds
ON
OFF
Repeat
time in
2 minutes
1 (add)
16
8
7
Alarm initiating
device
24 +
VAC/
VDC
NO
Repeat
time in
seconds Relay COM
(add)
NC
Relay
follows
horn
Jumper installed
NO
COM
Alarm
relay
NC
RAD-1
* Times are additive; for example, with SW3 and SW5 both ON, 4 sec + 16 sec = 20 sec delay
(or 200 sec if DLY TIME x10 jumper is installed)
SPECIFICATIONS
Supply Voltage
Alarm Delay Time
Alarm Horn
Alarm Repeat Time
Alarm Status Relay
Connections
Dimensions
Mounting
Approvals
Weight
Warranty
ORDERING INFORMATION
MODEL
RAD-1
66
888-397-5353 USA
kele.com
DESCRIPTION
Remote alarm indication station
March
March
20142014
NEW!
DESCRIPTION
Signal strobes and horns available in wall-mount and panelmount configurations with a variety of colors and voltages.
Model 125STR is a 120 VAC panel-mount strobe in NEMA
4X enclosure. Model 89STR mounts on a single-gang box
and is a single, indoor, flush-mount strobe. Model 869STR is
an indoor, flush-mount horn and strobe combination. Model
869 is an indoor, flush-mount horn only. Model 868 STR is an
outdoor, surface-mount horn and strobe combination. Model
868 is an outdoor, surface-mount horn.
2
869
869STR
FEATURES
125STRH
868STR
SPECIFICATIONS
Supply Voltage
N5 (89, 869, 868)
AQ (89, 869, 868)
120A (125STRH)
Current Rating
125STRH
Horn/Strobe
Average Candela
Amber
Blue
Clear
Green
Red
Color
Horn Loudness
Peak Candela
Strobe Tube Life
120 VAC
24 VDC, 24 VAC
120 VAC -20% to +10% of nominal
voltage
120 mA
24 VDC, 22 mA/390 mA
24 VAC, 72 mA/390 mA
120 VAC, 24 mA/87 mA
90 cd
20 cd
150 cd
70 cd
21 cd
Amber, blue, clear, green, red
90 dba @ 10'
300,000 cd
3,000 hrs, 1,000 hrs
ORDERING INFORMATION
MODEL
125STRH
89STR
869STR
868STR
869
868
868STR
March 2014
DESCRIPTION
Panel-mount strobe
Indoor flush-mount strobe
Indoor flush-mount electronic horn/strobe
Outdoor surface-mount electronic horn/strobe
Indoor flush- or panel-mount electronic horn
Outdoor surface-mount electronic horn
COLOR
A
Amber
B
Blue
C
Clear
G
Green
R
Red
SUPPLY VOLTAGE
AQ 24 VAC/VDC (89, 869, 868)
N5
120 VAC (89, 869, 868)
120A 120 VAC (125STRH only)
B
AQ
Operating Humidity
868, 868 STR
869, 89 STR, 869 STR
Operating Temperature
868, 868 STR
869, 89 STR, 869 STR
Dimensions
89 STR
869 STR, 868 STR,
869, 868
Enclosure Rating
125 STRH
Mounting
868
869
Approvals
Warranty
WIRING
Strobe
Horn
+
+
WE MAKE IT EASY.
kele.com
888-397-5353 USA
67
NEW!
ALARM HORN
SC-SERIES
DESCRIPTION
SPECIFICATIONS
Supply Voltage
SC110
SC628
SC628A, AN
Current Rating
SC100
SC628
SC628AN
SC628A
Horn Loudness
Tone
Panel Cutout
Weight
Approvals
Warranty
30-120 VAC/VDC
6-28 VDC
6-28 VAC/VDC
6-21 mA
3-18 mA
4-30 mA
6-23 mA
Medium, 68-80 dB
(AN model Loud, 80-95 dB)
Continuous
Panel, cutout 1.13" (2.87 cm)
0.1 lb (0.05 Kg)
UL recognized component File# S1290
1 year
WIRING
SC Horn
ORDERING INFORMATION
MODEL
SC110
SC628
SC628A
SC628AN
DESCRIPTION
Alarm horn, 120 VAC
Alarm horn, 24 VDC
Alarm horn, 24 VAC/VDC
Alarm horn, 24 VAC/VDC
Horn
DESCRIPTION
WALL-MOUNTED STROBE
STB, STB-H
FEATURES
Wall mounted with 4" square or double-gang box
Integral alarm horn (91 db)
24 VDC powered
15/75 candela strobe intensity
Meets requirements of ADA4.28.3
UL listed
Xenon strobe for constant flash rate
Strobe and horn powered separately if desired
Jumper-selectable, continuous or temporal tone
WIRING
Signal
S+ S+
SPECIFICATIONS
68
888-397-5353 USA
kele.com
80 mA at 24 VDC
136 mA at 24 VAC
1 Hz
104 dB max
15 (off-center) candela 75
(on-center) candela
Operating Temperature 32 to 120F (0 to 49C)
Dimensions
4.5"H x 4.56"W x 2.25"D
(11.43 x 11.58 x 5.72 cm)
Weight
STB
1.0 lb (0.45 Kg)
STBH
1.1 lb (0.5 Kg)
Approvals
UL Listed File S3406
Warranty
3 years
Supply Voltage
Current Rating
STB
STB-H
Strobe Frequency
Horn Loudness
Strobe Intensity
H- H+
S-
ORDERING INFORMATION
MODEL
STB
STB-H
DESCRIPTION
Wall-mounted strobe
Wall-mounted strobe with horn
March
March
20142014
NEW!
DESCRIPTION
FEATURES
SPECIFICATIONS
51XBR
WIRING
+ NEUTRAL
GND
24 VDC
POWER
WHITE
BLACK
BLACK
120 VAC
WIRING
GREEN
24 VDC
WIRING
RED
Supply Voltage
51XBRFx120A
120 VAC, 50/60 Hz,
51XBRFx24D
24 VDC
Current
51XBRFx120A
175 mA
51XBRFx24D
275 mA
Max. Off State Leakeage
Current
10 mA
Surge (inrush / duration)
51XBRFx120A
50 A / 260 s
51XBRFx24D
10 A / 120 s
Colors
Amber, blue, green,red, white
Flash Rate
65 FPM
Projected LED Life
148,000 hours
Horn Loudness
85 dB @10'
Strobe Tube Life
148,000 hours
Operating Temperature -31F to 150F (-35C to 66C)
Dimensions
7.38"H x 6"W (18.7cm x 15.2cm)
Mounting
Direct surface mount
Mounted on 1/2 in. NPT conduit
Mounted on a 4 in. octagon box
Approvals
cULus Listed, uL
Weight
2.14lbs (0.97 kg)
Warranty
18 months
120 VAC
POWER
Wire nuts not included.
DIMENSIONS
in
(cm)
ORDERING INFORMATION
7 3/8"
(187mm)
MODEL
51XBRF
DESCRIPTION
Combination flashing LEDs with horns
COLOR
A
Amber
B
Blue
G
Green
R
Red
W
White
SUPPLY VOLTAGE
24D 24 VDC
120A 120 VAC @ 50/60 Hz
57PLEDM
3 1/2"
(89mm)
6"
(152mm)
3/4"
(19.05mm)
1/2"
(12.7mm)
conduit hole
24D
March 2014
WE MAKE IT EASY.
kele.com
888-397-5353 USA
69
FEATURES
57PLEDMB
SPECIFICATIONS
DIMENSIONS
Supply Voltage
57PLEDMx24ADx
12 VDC, 0.7A, 24 VAC/VDC, 0.55A
57PLEDMx120Ax
120 VAC, 50/60Hz, 0.25A
Leakage Current
Off State Leakage 5 mA
Surge Current
57PLEDMx24ADx
8.5A/2ms
57PLEDMx120Ax
4.5A/1ms
Color
Amber, blue, green, magenta, red, clear
Projected LED Life 148,000 hours
Flash Mode
7 selectable patterns with HIPS switch
Operating Temperature -31 to 150.8F (-35 to 66C)
Dimensions
8" x 6.5" (203 x 165 mm)
Enclosure Rating
NEMA 4X
Mounting:
On 3/4" (19mm) NPT threaded conduit
Approvals
UL 1638 and cUL Listed (E11459)
Weight
3.4 lbs (1.54 kg)
Warranty
18 months
8"
(203mm)
6.5"
(165mm)
ORDERING INFORMATION
WIRING
24 VAC
POWER
GND
MODEL
57PLEDM
DESCRIPTION
LED beacon
COLOR
A
Amber
B
Blue
G
Green
M
Magenta
R
Red
W
White
SUPPLY VOLTAGE
24AD 12-24 VDC, 24 VAC @ 50/60 Hz
120A 120 VAC @ 50/60 Hz
BASE COLOR
(Blank)
Gray
B
Black
57PLEDM
WHITE
BLACK
GREEN
+ NEUTRAL
GND
24 VDC
POWER
120 VAC
WIRING
RED
BLACK
24 VAC
WIRING
GREEN
RED
BLACK
24 VDC
WIRING
+ NEUTRAL
120 VAC
POWER
ACCESSORIES
CBR
Corner Mount Bracket
70
888-397-5353 USA
57PLEDMA
57PLEDMR
WBR
Wall Mount Bracket
kele.com
CBR
WBR
24AD
ACCESSORIES
Corner Mount Bracket
Wall Mount Bracket
PAGE
70-71
70-71
March
2014
March
2014
NEW!
DESCRIPTION
2
94PLEDMA
DIMENSIONS
7.75"
(200mm)
HIPS
Programming
Switch
8.25"
(210mm)
WIRING
GND
24 VDC
POWER
WHITE
+ NEUTRAL
120 VAC
POWER
8.5 A / 2 ms
4.5 A / 1 ms
Amber, blue, green, magenta, red,
white/clear
Projected LED Life
148,000 hours
Flash Mode
7 Selectable Patterns with HIPS
Switch
Operating Temperature -31 to 150.8F (-35 to 66C)
Dimensions
94PLEDMx Models 8.25" x 7.75" (210 x 200 mm)
Enclosure Rating
NEMA 4X and IP66 Rated
Mounting
On 3/4 inch NPT conduit
(indoor or outdoor)
Approvals
UL 1638 and cUL Listed (E11459)
Weight
6.10 lbs (2.77 kg)
Warranty
18 months
March 2014
GND
24 VAC
POWER
SPECIFICATIONS
Supply Voltage
94PLEDMx24ADx
94PLEDMx120Ax
Leakage Current
Surge Current
94PLEDMx24ADx
94PLEDMx120Ax
Color
+ NEUTRAL
120 VAC
WIRING
GREEN
BLACK
BLACK
RED
24 VAC
WIRING
GREEN
24 VDC
WIRING
RED
BLACK
FEATURES
94PLEDMG
94PLEDMR
ORDERING INFORMATION
MODEL
94PLEDM
DESCRIPTION
LED beacon
COLOR
A
Amber
B
Blue
G
Green
M
Magenta
R
Red
W
White
SUPPLY VOLTAGE
24AD 12-24 VDC, 24 VAC @ 50/60 Hz
120A 120 VAC @ 50/60 Hz
BASE COLOR
(Blank)
Gray
B
Black
94PLEDM
CBR
WBR
WE MAKE IT EASY.
24AD
ACCESSORIES
Corner Mount Bracket
Wall Mount Bracket
kele.com
888-397-5353 USA
PAGE
70-71
70-71
71
107XBRCMG
107XBRPMR
107XBRBMA
FEATURES
WIRING
Connect leads to
Power Source
Yellow,
Not Connected
(wire nut supplied)
SPECIFICATIONS
Supply Voltage
107XBRxMx24D
107XBRxMx120A
Current
107XBRxMx24D
107XBRxMx120A
Color
Flash Mode
24 VDC
120 VAC, 60Hz
220 mA
115 mA
Amber,blue,green,red,clear
Steady on or flashing
(65 FPM, field configurable)
Project LED Life
148,000 hours
Operating Temperature See Table on next page
Dimensions
7" X 10.13" (178 x 260 mm)
Enclosure Rating
NEMA 3R and NEMA 4
Mounting
Bracket mount, pendant mount, ceiling mount
Approvals
UL & cUL Listed, UL Listed for Marine Use
Weight
107XBRBMx
10.87 lb (4.93 kg)
107XBRCMx
9.87 lb (4.47 kg)
107XBRPMx
8.97 lb (4.06 kg)
Warranty
18 months
Connect leads to
Power Source
Yellow
DC units: Connect
to Positive (+)
AC units: Connect to Hot
Flash Rate
65 fpm
* Class II and Class III only apply to the pendant mount versions with clear globes.
** Marine Rating applies to UL listing only.
72
888-397-5353 USA
kele.com
March
March
20142014
NEW!
Class I, Div. 2
Groups A, B, C, D
40C
135C (T4)
85C (T6)
55C
135C (T4)
85C (T6)
65C
135C (T4)
85C (T6)
Note: Class II and Class III only apply to the pendant mount versions
with clear globes.
DIMENSIONS
10 1/2"
(267mm)
9 7/8"
(251mm)
4"
(102mm)
9 3/4"
(248mm)
11 3/8"
(289mm)
10 1/4"
(260mm)
Ambient
temperature
10 1/8"
(260mm)
10 7/8"
(276mm)
7"
(178mm)
7"
(172mm)
Pendant Mounting
Bracket Mounting
Ceiling Mounting
ORDERING INFORMATION
MODEL
107XBR
DESCRIPTION
Hazardous Location LED Beacon
MOUNTING
PM Pendant
BM Bracket
CM Ceiling
COLOR
A
Amber
B
Blue
G
Green
R
Red
W
White
SUPPLY VOLTAGE
24D 24V DC
120A 120V AC @ 60 Hz
107XBR
BM
120A
ACCESSORIES
EDVPGU1
Optional Dome Gaurd
March 2014
WE MAKE IT EASY.
kele.com
888-397-5353 USA
73
FEATURES
105XBRMB
WIRING
SPECIFICATIONS
Supply Voltage
105XBRMx24D
105XBRMx120A
Current Rating
105XBRMx24D
105XBRMx120A
Color
Flash Mode
105-L Series
Lens
24 VDC
120 VAC 50/60Hz
OFF
OFF
ON
ON
STEADY
105XBR Base
0.215
0.108A
Amber, blue, green, red, white
Steady on or 65 FPM (dipswitch
settings)
Projected LED Life
148,000 hours
Operating Temperature -31 to 212F (-35 to 100C)
Dimensions
4.75" X 3.75" (121 x 95mm)
Enclosure Rating
NEMA 4X
Mounting
" pipe mount attachment, outlet
box attachment, or wall mounting
bracket
Approvals
UL & cUL Listed, UL Listed for
Marine Use
Weight:
1.4 lbs (0.63 kg)
Warranty:
18 months
18 Wire Leads
DC units; Red Positive (+),
AC units; Black Hot
OFF
OFF
ON
ON
65 FPM
(Dipswitches located
inside the unit)
Power Source
Wires
MODEL
Class
Division
Group
Operating Temperature
I
II
III
2
2
A, B, C, D
F, G
105XBRMx24D
105XBRMx120A
ORDERING INFORMATION
MODEL
DESCRIPTION
105XBRM XTRA-BRITE LED Adverse Locations Visual Signals
COLOR
A Amber
B Blue
G Green
R Red
W White
SUPPLY VOLTAGE
24D 24V DC
120A 120V AC
105XBRM
74
N5
888-397-5353 USA
kele.com
105BM
105BX
105PM
ACCESSORIES
Wall-mount bracket (requires 105BX)
Surface-mount box
Pipe-mount base
PAGE
74,77,479-480
74,77,479-480
74,77,479-480
4.5"
(114 mm)
4.5"
(114 mm)
5"
(127 mm)
2"
(51 mm)
2.25"
(57 mm)
5.25"
(133 mm)
6"
(152 mm)
4.5"
(114 mm)
March
March
20142014
NEW!
DESCRIPTION
FEATURES
125XBR
DIMENSIONS
SPECIFICATIONS
Supply Voltage
125XBRxx24Dx
125BRxx120Ax
Current
125XBRxx24Dx
125BRx120Ax
Color
Flash Rate
125XBRM
125XBRZ
Projected LED Life
Operating Temperature
Dimensions
Enclosure Rating
Mounting
Approvals
Weight
Warranty
24 VDC
120 VAC,50/60Hz
0.215A
0.108A
Amber, blue, clear, green, red
STEADY-ON/FLASHING (65 FPM)
STEADY-ON/LIGHTBURST (420FPM)
148,000 hours
-31 to 150F (-35 to 66C)
3.875"H3.875"H(98.4mm) X 3.25"W
(82.6mm)(98.4mm) X 3.25"W (82.6mm)
NEMA 4x
On 1/2" or 3/4" NPT conduit using a 1/2"
internal or 3/4" external conduit hub
cULus Listed
0.5lbs
18 months
Control panel
(Enclosure)
Yellow,
Not connected
(wire nut supplied)
MODEL
125XBR
125XBR
DESCRIPTION
Dual Mode XBR LED Beacons in NEMA 4X Enclosure
OPERATION
M
Steady-On/ Flashing LED
Z
Steady-On/ Lightburst
COLOR
A
Amber
B
Blue
G
Green
R
Red
W White
SUPPLY VOLTAGE
24D 24V DC
120A 120V AC @ 60 Hz
BASE COLOR
(BLANK)
Gray
B
Black
Z
18 Wire Leads
120A
March 2014
3.25"
(82.6mm)
ORDERING INFORMATION
125XBR Series
LED Visual Indicator
Gasket
(supplied)
WIRING
3.875"
(98.4mm)
125GRD
CBR
WBR
WE MAKE IT EASY.
ACCESSORIES
Optional Gaurd for use with 125 Class Beacons
Corner Mount Bracket
Wall Mount Bracket
kele.com
888-397-5353 USA
75
The Edwards 105XBRi Series XTRA-BRITE LED MultiStatus Indicator is a heavy duty, reliable UL and cUL listed,
multi-color visual signaling device. It features a corrosion
resistant Type 4X enclosure that is UL listed for Marine use, and
can be panel or conduit mounted. The base is manufactured
from glass-reinforced thermoplastic polyester resin and the
double fresnel lens is made of shatter resistant polycarbonate.
The lights are available in 24 VDC and 120 VAC 50/60 Hz, in
either Red/Blue/Amber or Red/Green/Amber.
FEATURES
Available in 24V DC or 120V AC
Available in Red/Blue/Amber or Red/Green/Amber
Three mounting bases: 3/4" pipe mount attachment, outlet
box attachment, or wall mounting bracket
PLC compatible
XTRA-SAFE Technology enables status indication for
those who are color blind
Dip switch settings for use with or without external control
Immune to shock and vibration
SPECIFICATIONS
Supply Voltage
105XBRiRxA24D
105XBRiRxA120A
Current
105XBRiRxA24D
105XBRiRxA120A
Max. Off State Leakage
Current
Surge (inrush/duration)
105XBRiRxA24D
105XBRiRxA120A
LED Colors
Flash Mode
Flash Rate
Projected LED Life
Operating Temperature
Dimensions
Enclosure Rating
Mounting
Approvals
Weight
Warranty
105XBRi-RGA
DIMENSIONS
24 VDC
120 VAC, 50/60Hz
4.625"
(92mm)
0.15A
0.1A
5mA
28A/65uSeconds
28.5A/212uSeconds
Red/Green/Amber or Red/Blue/Amber
Dipswitch settings for use with or without
external control
XTRA-SAFE Mode; Red 240 FPM,
Amber120 FPM, Green or Blue 65 FPM
148,000 hours
31 to 150F (-35 to 66C)
4.5"W x 4.625"H (114 x 117 mm)
NEMA 4X
" pipe mount attachment, outlet box
attachment, or wall mounting bracket
UL & cUL Listed
1.4 lb(0.63 kg)
18 months
4.375"
4.625"
(111mm) (117mm)
4.5"
(114mm)
76
888-397-5353 USA
kele.com
Class
l
ll
lll
l
ll
lll
Division
2
2
Group
A,B,C,D
F,G
2
2
A,B,C,D
F,G
Operating Temperature
T5 (100C, 212F)
T5 (100C, 212F)
T5 (100C, 212F)
T6 (85C, 185F)
T6 (85C, 185F)
T6 (85C, 185F)
March
March
20142014
NEW!
WIRING
105-LC Lens
Dipswtich Settings:
Applications WITHOUT
a PLC or Controller* XTRA-SAFE Technology
Disabled
Applications WITH
a PLC or Controller*
ORDERING INFORMATION
MODEL
105XBRi
DESCRIPTION
LED Multi-Status Indicator in NEMA 4X Enclosure
COLORS
RGA Red, Green, Amber
RBA Red, Blue, Amber
SUPPLY VOLTAGE
24D 24 VDC
120A 120 VAC @ 50/60 Hz
105XBRi
RGA
105BM
105BX
105PM
24D
Wire Nuts
(not supplied)
Applications WITHOUT
a PLC or Controller* XTRA-SAFE Technology
Enabled
(Factory Default)
ACCESSORIES
Wall-mount bracket (requires 105BX)
Surface-mount box
Pipe-mount base
PAGE
74,77,479-480
74,77,479-480
74,77,479-480
5"
(127mm)
4.5"
(114mm)
4.5"
(114mm)
2"
(51mm)
2.25"
(57mm)
5.25"
(133mm)
6"
(152mm)
March 2014
4.5"
(114mm)
(4) 3/4"
Knockouts
0.34"
(9mm)
Diameter
105BX
Outlet Box Attachment
WE MAKE IT EASY.
105PM
Pipe Mount Attachment
kele.com
888-397-5353 USA
77
The Edwards 125XBRi Series XTRA-BRITE LED MultiStatus Indicator is a UL and cUL listed, multi-color visual
signaling device. It features a corrosion resistant Type 4X
enclosure and can be panel or conduit mounted. The base
is manufactured from a 33% glass filled nylon, providing
high resistance to heat and high chemical resistivity. The
lens is made of shatter resistant polycarbonate. The lights
are available in 24 VDC and 120 VAC 50/60 Hz, in either
Red/Blue/Amber or Red/Green/Amber.
FEATURES
125XBRi
SPECIFICATIONS
DIMENSIONS
3.875"
(98.4mm)
78
Supply Voltage
125XBRiRxA24Dx 24 VDC
125XBRiRxA120Ax 120 VAC, 50/60Hz
Current
125XBRiRxA24Dx 0.15A
125XBRiRxA120Ax 0.1A
Max. Off State Leakage Current
5 mA
Surge (inrush/duration)
125XBRiRxA24Dx 28.5A/65uSeconds
125XBRiRxA120Ax 28.5A/212uSeconds
LED Colors
Red/Green/Amber or Red/Blue/
Amber
Flash Mode
Dipswitch enabled
Flash Rate
XTRA-SAFE Mode, Red 240
FPM, Amber120 FPM, Green or
Blue 65 FPM
Projected LED Life
148,000 hours
Operating Temperature -31 to 150F (-35 to 66C)
Dimensions
3.25"W x 3.875"H (82.6 x 98.4mm)
Enclosure Rating
NEMA 4X
Mounting
Conduit or panel mount
Approvals
UL & cUL Listed
Weight
0.5 lbs (0.22 kg)
Warranty
18 months
3.25"
(82.6mm)
888-397-5353 USA
kele.com
March
March
20142014
NEW!
Gasket
(supplied)
Control panel
Wire nuts
(not supplied)
Applications WITHOUT
a PLC or Controller* XTRA-SAFE Technology
Enabled
(Factory Default)
Applications WITHOUT
a PLC or Controller* XTRA-SAFE Technology
Disabled
ORDERING INFORMATION
MODEL
125XBRi
125XBRi
125GRD
CBR
WBR
March 2014
Applications WITH
a PLC or Controller*
Dipswtich Settings:
DESCRIPTION
LED Multi-Status Indicator in NEMA 4X Enclosure
COLOR
RGA Red, Green, Amber
RBA Red, Blue, Amber
SUPPLY VOLTAGE
24D 24 VDC
120A 120 VAC @ 60 Hz
BASE COLOR
(BLANK)
Gray
B
Black
RGA
120A
ACCESSORIES PAGE
Optional Guard for Use with 125 Class Beacons
Corner Mount Bracket
70-71
Wall Mount Bracket
70-71
WE MAKE IT EASY.
kele.com
888-397-5353 USA
79
270CLED
WIRING
FEATURES
4
3
2
1
V DC
V AC
() (+)
SPECIFICATIONS
Supply Voltage
Light Modules
24 VDC, 0.065A; 24 VAC, 0.075A to 0.085A
120 VAC/DC, 0.035A
Piezoelectric
Sound Modules
12 VAC/DC, 0.003A; 24 VAC/DC, 0.006mA;
48 VAC/DC,
0.013A; 120 VAC, 0.004A; 240 VAC, 0.01A
Magnetodynamic
Sound Modules
12 VAC, 0.12-0.95A; 12 VDC, 0.03-0.335A;
24 VAC
0.17-1.06A; 24VDC, 0.045-0.45A; 120VAC,
0.04-0.105A; 240 VAC, 0.025-0.06A
Color
White, red,green,blue, amber
Flash Mode
Steady on, Single (75FPM), Double
(85FPM), Triple (85FPM)
Horn Loudness
Piezoelectric
Sound Modules
12 VAC/DC, 72-79dB; 24 VAC/DC, 77-85dB
48 VAC/DC, 79-89dB; 120 VAC, 75-81dB
240 VAC, 78-87dB
Magnetodynamic
Sound Modules
12 VAC/DC, 86.5-103.5dB; 24 VAC/DC,
91-107dB;
120 VAC, 93-103dB; 240 VAC, 93-103.5dB
80
888-397-5353 USA
kele.com
Operating Temperature
Light Modules
-22 to 122F (-30 to 50C)
Piezoelectric Sound
Modules
-22 to 140F (-30 to 60C) at 12V to 48V;
-22 to 132.8F (-30 to 56C) at 120V to
240V
Magnetodynamic Sound
Modules
-22 to 140F (-30 to 60C) at 12V to 24V;
-22to 122F (-30 to 50C) at 120V to 240V
Dimensions
Base
1.89"H x 2.678" dia (48 x 68 mm)
Light Module
2.323"H x 2.953"dia (59 x 75 mm)
Sound Module
4.095"H x 2.953"dia (104 x 75 mm)
Enclosure Rating
NEMA 3R, 4X,IP66 rated base and light
modules, IP54 rated sound modules
Mounting
Wall mount or Surface mount
Weight
Base 0.83 lb (0.38 Kg)
Light Modules 0.81 lb (0.37 Kg)
Piezoelectric
Sound Modules
1.04 lb (0.47 Kg)
Magnetodynamic
Sound Modules
1.28 lb (0.58 Kg)
Approvals
cULus Listed, CE approved
Warranty
18 months
March
March
20142014
NEW!
Sound Type
Diagram
12 VDC/VAC
dB
A
at 1m
F (Hz)1
24 VDC/VAC
dB
A
at 1m
48 VDC/VAC
dB
A
at 1m
120 VAC
dB
A
at 1m
240 VAC
dB
A
at 1m
on
2
on
50/60
0.003
75
0.006
81
0.013
83
0.004
75
0.010
81
50/60
0.003
79
0.006
85
0.013
89
0.004
81
0.010
87
50/60
0.003
72
0.006
77
0.013
79
0.004
76
0.010
78
50/60
0.003
77
0.006
84
0.013
86
0.004
81
0.010
85
50/60
0.003
74
0.006
79
0.013
81
0.004
76
0.010
79
50/60
0.003
78
0.006
85
0.013
87
0.004
81
0.010
85
on
2
on
2
on
DIMENSIONS/ORDERING INFORMATION
BASE AND COVER
LIGHT MODULE
2.953"
(75mm)
2.835"
(72mm)
.788"
(20mm)
2.323" 2.717"
(59mm) (69mm)
3.11"
(79mm)
2.953"
(75mm)
2.323"
(59mm)
1.89"
(48mm)
2.678"
(68mm)
ACOUSTIC MODULE
4.567"
(116mm)
MODEL
270CLED
4.095"
(104mm)
DESCRIPTION
LED Stacklight Module
MODULE TYPE
S
Steady
M
Multimode
COLOR
A
Amber
B
Blue
G
Green
R
Red
Y
Yellow
W
White
SUPPLY VOLTAGE
24AD 24V AC/DC
120A 120V AC
BASE COLOR
(BLANK)
Gray
B
Black
1/2" NPT
270CLED
120A
2.953"
(75mm)
SOUND MODULES
Piezoelectric Sounder
270PZO1248AD
12-48 AC/DC, Gray
270PZO1248ADB
12-48 AC/DC, Black
270PZO120240A
120-240 VAC, Gray
270PZO120240AB
120-240 VAC, Black
Magnetodynamic Sounder
270MDA1224AD
270MDA1224ADB
270MDA120A
270MDA120AB
270MDA240A
270MDA240AB
March 2014
270FLXT
270FMLADAPT
270JBX**
270KIT**
270SSXT100
270SSXT200
270SSXT400
270TEP**
270THF**
270TWM**
270TWM2**
ACCESSORIES
270 Flexible Steel Extension Stem - 370mm
270 Female Adapter Base - Gray
Junction Box - Gray
Footing with Extension - Gray
270 Stainless Steel Extension Stem - 100mm
270 Stainless Steel Extension Stem - 200mm
270 Stainless Steel Extension Stem - 400mm
Threaded Extension Pole 100mm - Gray
Threaded Footing - Gray
Threaded Wall Mount - Gray
Double Threaded Wall Mount - Gray
**NOTE: Add B to the end of the model number for black unit.
WE MAKE IT EASY.
kele.com
888-397-5353 USA
81
OPERATION
Horns
IP20 upward mount
IP24 downward moun
Ratings IP66
Stack with
TWS-BS
Stack with
TWS-BP1
Stack with
TWS-KIT
Two stacks with
TWS-BP2
WIRING
5
4
3
2
1
5
4
3
2
1
C
VDC +
(VAC)
SPECIFICATIONS
Supply Voltage
Voltage Range
Power
Light module
Horn module
Color
Flash Rate
Incandescent LED
110 FPM 20 FPM
Strobe
65 FPM 10 FPM(24 VAC/DC)
90 FPM 20 FPM (110/240 VAC)
Horn Loudness
Medium, 76-86 dB
Operating Temperature -22 to 140F (-30 to 60C)
82
888-397-5353 USA
kele.com
Strobe
Dimensions
Base
Light
Horn
Mounting
Enclosure
Horn
Approvals
Warranty
March
March
20142014
NEW!
ORDERING INFORMATION
Steps
Direction
Part Number
Description
Select
Module
and Cap
(1 required)
TWS-BC
Select
Mounting
Base
(1 required)
TWS-BS
TWS-BP1
TWS-KIT
Module Voltage
Range
Color
Continuous
Incandescent
Flashing
Incandescent
24 VAC
BLUE
TWS-F1G
TWS-L1G
24 VDC
BLUE
TWS-F1N
TWS-L1N
110 VAC
BLUE
TWS-F1A
Continuous
LED
Flashing
LED
Strobe
TWS-FL1G
TWS-LL1G
TWS-X1G
TWS-FL1N
TWS-LL1N
TWS-X1N
TWS-L1A
TWS-FL1A
TWS-LL1A
TWS-X1A
TWS-X2G
Part Number
Select
Lighting
Modules
(5 maximum)
Select Horn
(1 maximum)
691-K0A
DCP-1.5-W
DCPA-1.2
TWS-BA15D-A
TWS-BA15D-G
TWS-BA15D-N
TWS-LED1-A
TWS-LED1-G
TWS-LED1-N
TWS-LED2-A
TWS-LED2-G
TWS-LED2-N
TWS-LED3-A
TWS-LED3-G
TWS-LED3-N
TWS-LED4-A
TWS-LED4-G
TWS-LED4-N
TWS-LED5-A
TWS-LED5-G
TWS-LED5-N
TWS-LRX2J
March 2014
24 VAC
AMBER
TWS-F2G
TWS-L2G
TWS-FL2G
TWS-LL2G
24 VDC
AMBER
TWS-F2N
TWS-L2N
TWS-FL2N
TWS-LL2N
TWS-X2N
110 VAC
AMBER
TWS-F2A
TWS-L2A
TWS-FL2A
TWS-LL2A
TWS-X2A
24 VAC
RED
TWS-F3G
TWS-L3G
TWS-FL3G
TWS-LL3G
TWS-X3G
24 VDC
RED
TWS-F3N
TWS-L3N
TWS-FL3N
TWS-LL3N
TWS-X3N
110 VAC
RED
TWS-F3A
TWS-L3A
TWS-FL3A
TWS-LL3A
TWS-X3A
24 VAC
GREEN
TWS-F4G
TWS-L4G
TWS-FL4G
TWS-LL4G
TWS-X4G
24 VDC
GREEN
TWS-F4N
TWS-L4N
TWS-FL4N
TWS-LL4N
TWS-X4N
110 VAC
GREEN
TWS-F4A
TWS-L4A
TWS-FL4A
TWS-LL4A
TWS-X4A
TWS-X5G
24 VAC
YELLOW
TWS-F5G
TWS-L5G
TWS-FL5G
TWS-LL5G
24 VDC
YELLOW
TWS-F5N
TWS-L5N
TWS-FL5N
TWS-LL5N
TWS-X5N
110 VAC
YELLOW
TWS-F5A
TWS-L5A
TWS-FL5A
TWS-LL5A
TWS-X5A
24 VAC
CLEAR
TWS-F6G
TWS-L6G
CLEAR
TWS-F6N
TWS-L6N
TWS-X6G
24 VDC
110 VAC
CLEAR
TWS-F6A
TWS-L6A
TWS-X6A
24 VAC
TWS-AG
24 VDC
TWS-AN
110 VAC
TWS-AA
TWS-BP2
TWS-X6N
ACCESSORIES
Control transformer, 120:24 VAC, 40 VA, Class 2
Power supply, 24 VAC IN to 24 VDC OUT
Power supply, 120 VAC In to 24 VAC/24 VDC Out
110VAC Replacement IC Lamp
24 VAC Replacement IC Lamp
24 VDC Replacement IC Lamp
110 VAC Blue replacement LED
24 VAC Blue replacement LED
24 VDC Blue replacement LED
110 VAC Amber replacement LED
24 VAC Amber replacement LED
24 VDC Amber replacement LED
110 VAC Red replacement LED
24 VAC Red replacement LED
24 VDC Red replacement LED
110 VAC Green replacement LED
24 VAC Green replacement LED
24 VDC Green replacement LED
110 VAC Yellow replacement LED
24 VAC Yellow replacement LED
24 VDC Yellow replacement LED
Universal Xenon replacement- requires solder connection
WE MAKE IT EASY.
kele.com
888-397-5353 USA
83
FEATURES
ESB-M1F-BLR-BS
ESB-M3S-BLP-CS
SPECIFICATIONS
Supply Voltage
Contact Rating
A600
Q600
Contact Configuration
M4S
M1F
Enclosure Rating
Approvals
Weight
M1S
M2S,M1F
M3S
M4S
Warranty
WIRING
TOP
1NO-1NC
Note: Typical contact connection
(4 momentary or 6 maintained maximum)
84
888-397-5353 USA
kele.com
March
March
20142014
NEW!
ORDERING INFORMATION
Model
Description
ESB
M3S
M2S
M4S
M1F
Break Lens to Release Button model with red momentary push button
BLP
ESB
ES-LENS
ES-NC
ES-NO
March 2014
M1S
BLP
BS
Boiler Shut-down
CS
Chiller Stop
FN
Exhaust Fan
HS
HVAC Shut-down
PO
Power Off
RP
Refrigerant Purge
SD
Shut Down
SO
Shut Off
ST
Stop
VP
Ventilation Stop
VT
Ventilation Start
XX*
Custom Legend
CS
M1S
ACCESSORIES PAGE
Replacment Lens for ESB series Operator Stations
Normally Closed Contact Block for Non-illuminated ESM, ESB, and ESP
Emergency Operator Stations
98
Normally Open Contact Block for Non-illuminated ESM, ESB, and
ESP Operator Stations
98
WE MAKE IT EASY.
kele.com
888-397-5353 USA
85
FEATURES
ESM-M1S-PP0-BS
ESM-NXS-PP0-VT
SPECIFICATIONS
Supply Voltage
Contact Rating
A600
Q600
Contact Configuration
M3S
M1F
Enclosure Rating
Approvals
Weight
M1S
NXS
M2S
SXS
M3S
M1F
Warranty
WIRING
PP0, PT0, PK
PTI24
TOP
1 NO-1NC
Note: Typical contact connection
86
888-397-5353 USA
kele.com
1NO-1NC
Note: Typical contact connection
(4 momentary or 6 maintained maximum)
March
March
20142014
NEW!
ORDERING INFORMATION
Model
Description
ESM
Enclosure
NXS
M2S
SXS
M3S
M1F
PT0
PTL24*
PK0
M1S
Legend
BS
CS
FN
HS
PO
RP
SD
SO
ST
Emergency - Stop
VP
VT
XX**
Custom Legend
*Can only be used with M1S or M1F enclosure
**18 character max, no color changes, no font changes,
no company logos.
ESM
ES-KEY
ES-NC
ES-NO
March 2014
M1S
PP0
CS
ACCESSORIES
Replacement Key for PK0 option, ESM and ESP series
Normally Closed Contact Block for Non-illuminated ESM, ESB, and ESP Emergency Operator Stations
Normally Open Contact Block for Non-illuminated ESM, ESB, and ESP Emergency Operator Stations
WE MAKE IT EASY.
kele.com
PAGE
87,89
85,87,89
85,87,89
888-397-5353 USA
87
FEATURES
Stainless steel plate mounted
Highly visible yellow/black background
UL listed for Category NISD Emergency Stop Devices,
File #E348889
40mm Red Mushroom Operators
1 N.O. and 1 N.C. contact included
ESP-PK0-SO
ESP-PP0-HS
SPECIFICATIONS
Supply Voltage
Contact Rating
A600
Q600
Contact Configuration
Storage Temperature
Dimensions
Enclosure Rating
Approvals
Weight
Warranty
WIRING
PP0, PT0, PK
PTI24
TOP
1 NO-1NC
Note: Typical contact connection
88
888-397-5353 USA
kele.com
1NO-1NC
Note: Typical contact connection
(4 momentary or 6 maintained maximum)
March
March
20142014
NEW!
ORDERING INFORMATION
Model
Description
ESP
Button Style
PT0
PTL24
PK0
CS
FN
HS
PO
RP
SD
SO
ST
Emergency - Stop
VP
VT
XX*
Custom Legend
PP0
ES-KEY
ES-NC
ES-NO
March 2014
PP0
CS
ACCESSORIES PAGE
Replacement Key for PK0 option, ESM and ESP series
98
Normally Closed Contact Block for Non-illuminated ESM, ESB, and
ESP Emergency Operator Stations
98
Normally Open Contact Block for Non-illuminated ESM, ESB, and
ESP Emergency Operator Stations
98
WE MAKE IT EASY.
kele.com
888-397-5353 USA
89
Pilla Electrical
Products, Inc.
DESCRIPTION
ST120-SN4XNM-PO
ST120-FN1-BP2-RPG
ST120SL-RP2-VS
ST120-SN3R-BP2-CS
ST120SL-N1-BS
ORDERING INFORMATION
PUSH-BUTTON OPERATION
MODEL DESCRIPTION
ST120SL Complete push-pull emergency operator station (contacts not included)
Red maintained 40 mm mushroom (push-pull) labeled Pull to Reset NEMA 4X and 12 nonmetallic surface-mount box
F
Red maintained 40 mm mushroom (push-pull) labeled Pull to Reset NEMA 4 and 12 all-metal flush-mount box
FN1 Red maintained 40 mm mushroom (push-pull) labeled Pull to Reset NEMA 1 all-metal flush-mount box
N1 Red maintained 40 mm mushroom (push-pull) labeled Pull to Reset NEMA 1 all-metal surface-mount box
RP1 Red Raised Lid - Push Button padlockable solid lid over momentary flush round push button
RP2 Red Raised Lid - Push Button padlockable solid lid over maintained flush round push button
LEGENDS
BS
EMERGENCY - BOILER SHUT-DOWN
CS
EMERGENCY - CHILLER STOP
FAN
EMERGENCY - EXHAUST FAN
HS
EMERGENCY - HVAC SHUT-DOWN
PO
EMERGENCY - POWER OFF
RPG
EMERGENCY - REFRIGERANT PURGE
SD
EMERGENCY - SHUT DOWN
SO
EMERGENCY - SHUT OFF
ST
EMERGENCY - STOP
VS
EMERGENCY - VENTILATION STOP
VSTART EMERGENCY - VENTILATION START
BREAK-LENS OPERATION
MODEL
ST120
DESCRIPTION
Complete break-lens emergency operator station (spare lens included, contacts not included)
FN1
FN4
SN1
SN3R
SN4
SN4XNM
PILCLHCOV1
PILCLHCOV5
PILENS
PILNCCB
PILNOCB
ACCESSORIES
Clear hinged cover for push-pull model and ST120SN4XNM
Clear hinged cover for break-lens model except ST120SN4XNM
Replacement lens for break-lens model
N.C. stackable contact block for MST1 stations
N.O. stackable contact block for MST1 Stations
PAGE
90,92
90-92
90-92
Notes: Six contact blocks max (2 rows of 3) may be used on each break glass operator station and the -FN1 and -N1
modesl of push-button operation stations. The - model and F model push-button stations can only take three contact
blocks (1 row of 3).
All units use normally open contacts to close circuit or normally closed to open circuit (except "Break Glass of Release
Button" model).
90
888-397-5353 USA
kele.com
March
March
20142014
NEW!
Pilla Electrical
Products, Inc.
DESCRIPTION
FEATURES
WPS-MP-BS-CLM
WPS-KR-VS
WPS-BR-PO
WPS-MO-PO-DLM
WPS-RP2-HS
ORDERING INFORMATION
MODEL DESCRIPTION
WPS Wall plate, box mounted emergency operator station (order contacts separately)
BUTTON STYLE
MO Red momentary 40 mm mushroom
MP Red maintained 40 mm mushroom (push-pull) labeled Pull to Reset
TW Red maintained 40 mm mushroom (push-turn to reset) labeled Turn to Reset
KR
Red maintained key release 40 mm mushroom with two keys, key required to reset only
RP1 Red Raise Lid - Push Button padlockable solid lid over momentary flush round push button
RP2 Red Raise Lid - Push Button padlockable solid lid over maintained flush round push button
CP1 Red Raise Lid - Push Button padlockable clear lid over momentary flush round push button
CP2 Red Raise Lid - Push Button padlockable clear lid over maintained flush round push button
BR
Break Lens model with hammer (NC/NO contacts included)
LEGENDS
CS
EMERGENCY - CHILLER STOP
PO
EMERGENCY - POWER OFF
BS
EMERGENCY - BOILER SHUT-DOWN
HS
EMERGENCY - HVAC SHUT-DOWN
VS
EMERGENCY - VENTILATION STOP
ST
EMERGENCY - STOP
SD
EMERGENCY - SHUT-DOWN
VSTART EMERGENCY - VENTILATION START
SO
EMERGENCY - SHUT-OFF
CLM Clearhinged lockout lid for use with MO, MP, TW, KR 40mm mushroom button
DLM Hinged lockout lid for use with MO 40mm mushroom button.
Requires lid to be lifted in order to automatically release/extend mushroom
device.
Example: WPS-MP-VSTART Wall plate operator station red maintained
push-pull button labeled Ventilation Start
WPS
PILCLM
PILNCCB
PILNOCB
PILRPKEY
PILBRLENS
Note:
March 2014
MP
VSTART
RELATED PRODUCTS
Clear cover for MO, MP, TW, KR stations
N.C. stackable contact block
N.O. stackable contact block
Replacement key for WPS-KR series, specify model and key number when ordering
Replacement lenses for WPSBR models only (3/pkg)
Three contact blocks can be used for a depth of 1-5/8" (42 mm).
Three more can be added for a depth of 2-5/8" (67 mm).
WE MAKE IT EASY.
kele.com
PAGE
103
103
888-397-5353 USA
91
Pilla Electrical
Products, Inc.
DESCRIPTION
FEATURES
MNSTN1SS with
PILCLHCOV1 COVER
MNSTLGSS
SPECIFICATIONS
Contact Rating
Contact Configuration
Operating Temperature
Storage Temperature
Conduit Connection
MNSTxxN1x/MST1xxN1x Knockouts in top, bottom & back for 1/2"
(1.27 cm) and 3/4" conduit
Mounting
MNSTx/MST1x
Surface mount, external mounting tabs
top and bottom
MNSTxxN1x/MST1xxN1x Surface mount, two mounting holes in the
back
Approvals
Enclosure Rating
MNSTx/MST1x
MNSTxxN1x/MST1xxN1x
Dimensions
MNSTx/MST1x
ORDERING INFORMATION
Model Description
MNST Power control stations, two maintained/interlocked pushbuttons, one set of NO/NC specialty contact blocks included
MST1 Power control stations, two momentary/non-interlocked pushbuttons, one set of NO/NC contact blocks included
(BLANK) Default main legend "POWER CONTROL SWITCH"
LB
Main legend "BOILER"
LC
Main legend "CHILLER"
LE
Main legend "EXHAUST FAN"
LF
Main legend "FUEL"
LG
Main legend "GENERATOR"
LH
Main legend "HVAC"
LP
Main legend "POWER"
LV
Main legend "VENTILATION"
(BLANK) NEMA 4X/4/12/3 non-metallic grey surface-mount box for outdoor or indoor/wet locations
N1
NEMA 1 metal grey surface-mount box for indoor/dry locations
SS "START" and "STOP" pushbuttons
OO "ON" and "OFF" pushbuttons
CI Custom inscriptions on pushbuttons (customer to provide inscription details)
MNST
LB
N1
SS
Example: MNSTLBN1SS Boiler control station in NEMA 1 metal housing with start
and stop pushbuttons
ACCESSORIES
PILCLHCOV1
Clear
hinged
cover
for
push-pull
model and ST120SN4XNM
ACCESSORIES
closed
contact
block for MNST stations only
PILNCCB PILNCMN N.C.Additional
stackablespecialty
contactnormally
block for
MST1
stations
Additional specialty normally open contact block for MNST stations only
PILNCMN PILNOMN Additional
specialty Normally Closed contact block for MNST stations only
PILCLHCOV1 Clear hinged cover, tamperproof
PILNOCB PILNCCB N.O.N.C.
stackable
contact
block
stackable
contact
blockfor
forMST1
MST1 Stations
stations
N.O. stackable
contact
block Open
for MST1
stations
PILNOMN PILNOCB Additional
specialty
Normally
contact
block for MNST stations only
92
888-397-5353 USA
kele.com
PAGE
90,92
90-92
90-92
March
March
20142014
NEW!
DESCRIPTION
VPI-1-C-G
(typical panel mount)
VPI-1-C-WMB
VPI-4
SPECIFICATIONS
Supply Voltage
Black
Color
Input Signal
Input Impedance
Accuracy
Digit Count
VPI-1, VPI-4
VPI-3
Digit Size
VPI-1, VPI-3C
VPI-4
Digit Span (VPI-3)
Decimal Point (VPI-3)
Display Color
Zero Range (VPI-3)
Operating Humidity
Operating Temperature
Panel Clearance
Cutout Requirement
VPI-1C
VPI-4
Dimensions
VPI-1C, VPI-3C
VPI-4
E (NEMA4X)
WMB
Enclosure Rating
Approvals
Weight
Warranty
VPI-1-C-R-E
24 VDC @ 10 mA
24 VDC @ 35 mA
0-5 VDC or 0-10 VDC
400 k
0.1% of scale plus one digit
APPLICATION
Temperature
Humidity
Pressure
3-1/2 digits
4-1/2 digits
VPI-1-C-R-E-DBL
WIRING
Power supply
24 VDC
Voltage
input
+
PWR
+
SIG
BL
5V
10V
OFFSET
5V Span pot
10V Span pot
Offset (ZERO) pot
VPI
ORDERING INFORMATION
Displays are custom calibrated at no charge
and require specification of input scale (VDC),
range, engineering units, and decimal point
placement.
MODEL
VPI-4
VPI-1C
VPI-3C
VPI-1C
DCP-1.5-W
DCPA-1.2
GP-3420
GP-3430
March 2014
DESCRIPTION
3-1/2 digit panel display*, 1'' (2.54 cm) digits
3-1/2 digit panel display*, 0.5'' (1.27 cm) digits
4-1/2 digit panel display*, 0.5'' (1.27 cm) digits
No enclosure
E
LCD panel display with NEMA 4X enclosure (VPI-1C and VPI-3C only)
WMB
LCD panel display with small enclosure (VPI-1C and VPI-3C only)
E-DBL Two LCD panel displays in one NEMA 4X enclosure (VPI-1C and VPI-3C only)
A
E-DBL
RELATED PRODUCTS
Power supply, 24 VAC IN to 24 VDC OUT
Power supply, 120 VAC In to 24 VAC/24 VDC Out
LPI-1C, LPI-3C, VPI-1C mounting goof plate, 3.40" x 2.00" (8.6 x 5.1 cm)
LPI-1C, LPI-3C, VPI-1C mounting goof plate, 3.40" x 3.00" (8.6 x 7.6 cm)
WE MAKE IT EASY.
kele.com
PAGE
995
93,97-99
93,97-99
888-397-5353 USA
93
SGD-28-M-C-E
FEATURES
APPLICATION
SGD-28-M
Temperature
Humidity
Pressure
Air quality
Valve or damper position
Air or water flow
Water level
Light level
Motor speed
Any 4-20 mA or 0-10 VDC transmitter signal
METER CHOICES
Digital
Analog
Bar Graph
SPECIFICATIONS
Supply Voltage
Input Signal
Input Impedance
Wire Type
Accuracy
Display Type
SGD-24
4 to 30 VDC @ 35 mA
0/2-10 VDC, 4-20mA (with resistor)
0-40 VDC max
110 mA @ 5 VDC
Screw terminals, 16 to 26 AWG
0.05% typical, 0.1% maximum
94
888-397-5353 USA
kele.com
SGD-28
Dimensions
SGD-24
March
March
20142014
NEW!
WIRING
*Order Separately
BAS Input
4-20 mA
1 2 3 4
* 250
4-20 mA
Loop-powered
Transmitter
24 VDC
Power Supply
4-20 mA Wiring
++ - +
1 2 3 4
BAS Input
0-10V
+ SIG
+ PWR
0-10 VDC
Transmitter
1-5 V
++ - +
- +
24 VDC
Power Supply
ORDERING INFORMATION
MODEL
SGD-24-M
SGD-24-M-C
SGD-24-M-C-E
SGD-24-M-C-XK
SGD-24-M-C-XK-E
SGD-24-M-CEDBL
SGD-24-MCXKEDBL
SGD-28-M
SGD-28-M-C
SGD-28-M-C-E
SGD-28-M-C-XK
SGD-28-M-C-XK-E
SGD-28-M-CEDBL
SGD-28-MCXKEDBL
SFP66-258E
SFP66-258F
SFP66-258C
SFP66-258D
USB-A-MF
P6063C-P258
250R-3-1
DCPA-1.2
DCP-1.5-W
March 2014
DESCRIPTION
Smart Graphics Display, 2.4 inch
Smart Graphics Display, 2.4 inch, custom calibrated
Smart Graphics Display, 2.4 inch, calibrated, enclosure
Smart Display, 2.4 inch, calibrated, custom graphic
Smart Display, 2.4 inch, calibrated, custom graphic, enclosure
Smart Display, 2.4 inch, calibrated, enclosure, double
Smart Display, 2.4 inch, calibrated, custom graphic, enclosure, double
Smart Graphics Display, 2.8 inch
Smart Graphics Display, 2.8 inch, custom calibrated
Smart Graphics Display, 2.8 inch, calibrated, enclosure
Smart Display, 2.8 inch, calibrated, custom graphic
Smart Display, 2.8 inch, calibrated, custom graphic, enclosure
Smart Display, 2.8 inch, calibrated, enclosure, double
Smart Display, 2.8 inch, calibrated, custom graphic, enclosure, double
ACCESSORIES
Panel for SGD-24, single
Panel for SGD-24, double
Panel for SGD-28, single
Panel for SGD-28, double
USB Cable Type A TO Mini B
6x6x3 NEMA4X Encl Clear Hinge Cover w/ SOPK Kit
250 OHM 3 WATT 1% Resistor Long Leads
RELATED PRODUCTS
Power supply, 120 VAC IN to 24 VAC/24 VDC OUT
Power supply, 24 VAC IN to 24 VDC OUT
WE MAKE IT EASY.
kele.com
888-397-5353 USA
95
The BDR Big Display Readout has large 2.3" size LED digits. It
provides 3-1/2 digits and comes in three bright LED colors: red,
green or blue. The BDR has a selectable decimal point position
and accommodates negative sign readouts. The readouts are in
linear proportion to the 4-20 mA, 0-10 VDC, 0-5VDC signal inputs
or a voltage monitor input from 0-20VDC. These displays are
easy to field calibrate with non-interactive zero and span pots as
well as free pre-calibration service from Kele at time of order.
BDR-G
BDR-B
BDR-R
SPECIFICATIONS
WIRING
VPI
DCV
LPI
5V
10V
SPAN ZERO SPAN ZERO SPAN SPAN
LPI
OFFSET
VPI
5V
LPI
DP1
VPI
DP2
DCV
Calibration pots
(use varies with
source; see
installation
manual)
10V
Display Color
Display Size
Display Type
Range
Calibration
Operating Humidity
Operating Temperature
Cutout Requirement
Dimensions
Enclosure Options
Mounting
Approvals
Weight
Warranty
2V
Accuracy
Digit Span
Decimal Point
20V
Supply Voltage
Input Current
Input Voltage DC
Input Monitor
DP3
FUNCTION
DECIMAL
DCV
DCV
IN
IN+
RANGES
200mV
FEATURES
VPI
SIG SIG+
LPI
SIG SIG+
AC POWER
90V-250V
AC
AC
GND
BDR-999-[R/G/B]-24
10.5 to 30 VAC/VDC
INPUT
ORDERING INFORMATION
Displays are custom calibrated at
no charge and require specification
of input scale (mA, VDC), range,
engineering units, and decimal point
placement.
96
MODEL
BDR-999-R-24
BDR-999-G-24
BDR-999-B-24
BDR-999-R-120
BDR-999-G-120
BDR-999-B-120
DESCRIPTION
Red LED 3-1/2 digit display, 2.3" (5.8 cm) high 24 VAC/VDC
Green LED 3-1/2 digit display, 2.3" (5.8 cm) high 24 VAC/VDC
Blue LED 3-1/2 digit display, 2.3" (5.8 cm) high 24 VAC/VDC
Red LED 3-1/2 digit display, 2.3" (5.8 cm) high 120 VAC
Green LED 3-1/2 digit display, 2.3" (5.8 cm) high 120 VAC
Blue LED 3-1/2 digit display, 2.3" (5.8 cm) high 120 VAC
RELATED PRODUCTS
DCPA-1.2
Power supply, 120 VAC IN to 24 VAC/24 VDC OUT
DCP-1.5-W
Power supply, 24 VAC IN to 24 VDC OUT
888-397-5353 USA
kele.com
March
March
20142014
NEW!
DESCRIPTION
LPI-1C-WMB
APPLICATION
Temperature
Humidity
Pressure
Differential or static pressure
Kilowatt demand
LPI-1C-E
SPECIFICATIONS
Input Signal
4-20 mA loop-powered
Input Impedance
300 nominal @ 24 VDC
Accuracy
0.1% of scale
Digit Size
0.5" (1.27 cm)
Decimal Point
Three positions or none (1.0.0.0)
Display Color
Black
Range
-1999 to 1999
Operating Humidity
95% non-condensing
Operating Temperature 32 to 122F (0 to 50C)
Panel Clearance
1.97" (5.00 cm)
Cutout Requirement
1.00" H x 2.40" W (2.54 x 6.10 cm)
Dimensions
Display
1.11" H x 2.51" W (2.82 x 6.38 cm)
E (NEMA 4X)
6.0"H x 6.0"W x 3.0"D
(15.2 x 15.2 x 7.62 cm)
WMB
2.12''H x 3.12''W x 1.75''D
(5.4 x 7.94 x 4.45 cm)
Approvals
RoHS
Weight
0.14 lb (0.06 kg) (display only)
Warranty
1 year
LPI-1C-E-DBL
WIRING
Power
supply
+
Sensor/
transmitter
+
-
4-20 mA
+
S
P
A
N
BAS input
or other
+ 4-20 mA load
-
SIG
Z
E
R
O
Factory calibrated
(no field calibration
needed)
F
C
PSI
%
Board unit
Connector pins
ORDERING INFORMATION
MODEL
LPI-1C
DESCRIPTION
3-1/2 digit LCD panel display with black digits*
No enclosure
E
3-1/2 digit LCD panel display with NEMA 4X enclosure
WMB
3-1/2 digit LCD panel display with small enclosure
E-DBL Two 3-1/2 digit LCD panel displays in one NEMA 4X enclosure
LPI-1C
DCP-1.5-W
DCPA-1.2
GP-3420
GP-3430
March 2014
RELATED PRODUCTS
Power supply, 24 VAC IN to 24 VDC OUT
Power supply, 120 VAC In to 24 VAC/24 VDC Out
LPI-1C, LPI-3C, VPI-1C mounting goof plate, 3.40" x 2.00" (8.6 x 5.1 cm)
LPI-1C, LPI-3C, VPI-1C mounting goof plate, 3.40" x 3.00" (8.6 x 7.6 cm)
WE MAKE IT EASY.
kele.com
PAGE
93,97-99
93,97-99
888-397-5353 USA
97
NEW!
DESCRIPTION
Models LPI-1CA, G, and R are 4-20 mA, 24 VDC-powered,
brightly lit 3-1/2 digit color LCD displays, available with
amber, green, or red digits. Models LPI-1CA, G, and R also
feature jumper-selectable built-in engineering units of F, C,
PSI, %, or no units. The same 24 VDC power supply can be
used to provide power to the 4-20 mA loop and the display.
FEATURES
Indication of 4-20 mA signal in desired scale
Bright 3-1/2 digit LCD display
Available in amber, green, and red
Snap-in panel mounting
Easy-to-read digits
NEMA 4X enclosure available
Precalibrated for desired range
Negative-to-positive indication
Jumper selectable engineering unit display
APPLICATION
Temperature
Humidity
Pressure
SPECIFICATIONS
Supply Voltage
24 VDC @ 35 mA
Input Signal
4-20 mA loop powered
Input Impedance
300 nominal @ 24 VDC
Accuracy
0.1% of scale
Digit Size
0.5" (1.27 cm)
Decimal Point
Three positions or none (1.0.0.0)
Display Color
Amber
Display Size
0.5" (1.27 cm)
Range
-1999 to 1999
Operating Humidity
95% non-condensing
Operating Temperature 32 to 122F (0 to 50C)
Panel Clearance
1.97" (5.00 cm)
Cutout Requirement
1.00"H x 2.40"W (2.54 x 6.10 cm)
Dimensions
Display
1.11"H x 2.51"W (2.82 x 6.38 cm)
E (NEMA 4x)
6.0"H x 6.0"W x 3.0"D
(15.2 x 15.2 x 7.62 cm)
WMB
2.12''H x 3.12''W x 1.75''D
(5.4 x 7.94 x 4.45 cm)
DBL
6.0"H x 6.0"W x 3.0"D
(15.2 x 15.2 x 7.62 cm)
Approvals
RoHS
Weight
0.14 lb (0.06 kg) (Display only)
Warranty
1 year
LPI-1C-G
(typical panel mount)
LPI-1C-G-WMB
LPI-1C-R-E
LPI-1C-R-E-DBL
Differential or static pressure
Kilowatt demand
Gallons per minute
Voltage
Current
Many other 4-20 mA applications
WIRING
Power
supply
24 VDC
+ Sensor/
transmitter
- BAS input or
4-20 mA
-+
SIG
S
P
A
N
other 4-20 mA
load
B/L
Z
E
R
O
Factory calibrated
(no field calibration needed)
Board unit
F
C
PSI
%
Connector pins
ORDERING INFORMATION
MODEL
LPI-1C-A
LPI-1C-G
LPI-1C-R
LPI-1C-A
DCP-1.5-W
DCPA-1.2
GP-3420
GP-3430
98
888-397-5353 USA
DESCRIPTION
3-1/2 digit LCD with amber digits*
3-1/2 digit LCD with green digits*
3-1/2 digit LCD with red digits*
No enclosure
E
3-1/2 digit LCD panel display with NEMA 4X enclosure
WMB
3-1/2 digit LCD panel display with small enclosure
E-DBL Two 3-1/2 digit LCD panel displays in one NEMA 4X enclosure
E-DBL Example: LPI-1C-A-E-DBL Two amber 3-1/2 digit
LCD displays mounted in single enclosure
RELATED PRODUCTS
Power supply, 24 VAC IN to 24 VDC OUT
Power supply, 120 VAC In to 24 VAC/24 VDC Out
LPI-1C, LPI-3C, VPI-1C mounting goof plate, 3.40" x 2.00" (8.6 x 5.1 cm)
LPI-1C, LPI-3C, VPI-1C mounting goof plate, 3.40" x 3.00" (8.6 x 7.6 cm)
kele.com
PAGE
93,97-99
93,97-99
March
March
20142014
NEW!
DESCRIPTION
LPI-3C
(typical panel mount)
LPI-3C-A-WMB
FEATURES
LPI-3C-G-E
LPI-3C-R-E-DBL
APPLICATION
SPECIFICATIONS
Supply Voltage
24 VDC @ 35 mA for colored digits
Input Signal
Loop-powered 4-20 mA signal
Input Impedance
300 nominal @ 24 VDC
Accuracy
0.1% FS
Digit Size
0.5" (1.27 cm) LCD
Decimal Point
Four positions or none (1.0.0.0.0)
Range
-19999 to +19999
Operating Humidity
95% non-condensing
Operating Temperature 32 to 122F (0 to 50C)
Panel Clearance
1.97" (5.00 cm)
Cutout Requirement
1.00"H x 2.40"W (2.54 x 6.10 cm)
Dimensions
Display
1.11"H x 2.51"W (2.82 x 6.38 cm)
E (NEMA 4X)
6.0"H x 6.0"W x 3.0"D
(15.2 x 15.2 x 7.62 cm)
WMB
2.12''H x 3.12''W x 1.75''D
(5.4 x 7.94 x 4.45 cm)
Approvals
RoHS, Except: (LPI-3CA)
Weight
0.14 lb (0.06 kg) (Display only)
Warranty
1 year
Temperature
Humidity
Pressure
Differential or static pressure
Kilowatt demand
Gallons per minute
Voltage
Current
Many other 4-20 mA applications
WIRING
Power supply
24 VDC
Sensor/
transmitter
4-20
mA
+ - + SPAN
SIG B/L
BAS input
or other
4-20 mA load
Power connection only required
for amber, green, or red display.
ZERO
Board unit
Factory calibrated
(no field calibration
required)
Connector pins
F
C
PSI
%
Display unit
ORDERING INFORMATION
Displays are custom calibrated at no charge
and require specification of input scale (mA),
range, engineering units, and decimal point
placement.
MODEL
LPI-3C
LPI-3C
DCP-1.5-W
DCPA-1.2
GP-3420
GP-3430
March 2014
DESCRIPTION
4-1/2 digit LCD panel display*
4-1/2 digit display with black digits
A
4-1/2 digit display with amber digits, (This unit not RoHS compliant)
G
4-1/2 digit display with green digits
R
4-1/2 digit display with red digits
No enclosure
E
4-1/2 digit LCD panel display with NEMA 4X enclosure
WMB
4-1/2 digit LCD panel display with small enclosure
E-DBL Two 4-1/2 digit LCD panel displays in a single NEMA 4X enclosure
A
RELATED PRODUCTS
Power supply, 24 VAC IN to 24 VDC OUT
Power supply, 120 VAC In to 24 VAC/24 VDC Out
LPI-1C, LPI-3C, VPI-1C mounting goof plate, 3.40" x 2.00" (8.6 x 5.1 cm)
LPI-1C, LPI-3C, VPI-1C mounting goof plate, 3.40" x 3.00" (8.6 x 7.6 cm)
WE MAKE IT EASY.
kele.com
PAGE
93,97-99
93,97-99
888-397-5353 USA
99
NEW!
DESCRIPTION
LPI-4
FEATURES
LPI-4G
LPI-4R
APPLICATION
Temperature
Voltage/current
Humidity
Pressure
Killowatt demand
Gallons per minute
LPI-4A
SPECIFICATIONS
Supply Voltage
WIRING
Power supply
24 VDC
Power supply
24 VDC
+ Sensor/ +
transmitter
+ +
BAS input
or other
4-20 mA load
Sensor/
transmitter
+ -
BAS input
or other
4-20 mA load
+ - + SIG
SIG
B/L
SPAN
ZERO
LPI-4
SPAN
ZERO
LPI-4R, G, A
ORDERING INFORMATION
MODEL
LPI-4
LPI-4R
LPI-4G
LPI-4A
DCP-1.5-W
DCPA-1.2
GP-5132
100
888-397-5353 USA
DESCRIPTION
3-1/2 digit black panel display
3-1/2 digit red panel display
3-1/2 digit green panel display
3-1/2 digit amber panel display
RELATED PRODUCTS
Power supply, 24 VAC IN to 24 VDC OUT
Power supply, 120 VAC IN to 24 VAC/24 VDC OUT
LPI-4 mounting goof plate, 5.13" x 3.25" (13.0 x 8.3 cm)
kele.com
March
March
20142014
NEW!
DESCRIPTION
LPI-5R
SPECIFICATIONS
Supply Voltage
Input Signal
Input Impedance
Black
Red
Accuracy
Digit Count
Digit Size
Decimal Point
Display Color
Engineering Units
Range
Black
24 VDC @ 35 mA
4-20 mA
300
380
0.1% of scale plus one digit
3-1/2 digits max
0.37" (0.94 cm)
Three positions of none (1.0.0.0)
Black, Red
(Black only) M, k, C, m, V, F, A,
-1999 to 1999, min span 100 digit
counts
Red
0 to 1999
Operating Humidity
95% RH non-condensing
Operating Temperature 32 to 130F (0 to 54C)
Cutout Requirement
Black
0.86"H x 1.57"W (2.2 x 4.0 cm)
Red
0.8"H x 1.3"W (2.0 x 3.3 cm)
Dimensions
Black
0.95"H x 1.73"W x 1.1"D
(2.4 x 4.4 x 2.8 cm)
Red
1.28"H x 1.82"W x 1.6"D
(3.25 x 4.64 x 4.0 cm)
Approvals
RoHS
Weight
0.13 lb (0.06 Kg)
Warranty
1 year
Temperature
Humidity
Pressure
2
LPI-5
WIRING
24 VDC Power supply
+ -
+
Sensor/
transmitter -
- BAS input
or other
+ 4-20 mA load
4-20 mA
Factory calibrated
(No field calibration needed)
SIG
LPI-5
or
LPI-5R
ORDERING INFORMATION
Displays are custom calibrated at no
charge and require specification of
input scale (mA), range, engineering
units, and decimal point placement.
MODEL
LPI-5
LPI-5R
DCPA-1.2
DCP-1.5-W
March 2014
DESCRIPTION
3-1/2 digit small black LCD panel display
3-1/2 digit small red LED panel display
RELATED PRODUCTS
Power supply, 120 VAC IN to 24 VAC/24 VDC OUT
Power supply, 24 VAC IN to 24 VDC OUT
WE MAKE IT EASY.
kele.com
888-397-5353 USA
101
The ALD-1 is a 5-1/2 digit LCD resettable accumulator or runtime counter. The lithium battery provides years of troublefree service. Two wires are all that are necessary to totalize
consumption, flow data, or run-time data. No external power
supply is necessary.
GROUND
SHIPPING
ONLY
FEATURES
Resettable accumulator or run-time counter
Long life lithium battery
No external power supply
WIRING
Switch
Contact
Count
N.O.
Run
ALD-1C/10C
Run Time
Clock
(+) (white)
ALD-1/R
Accumulator
Counter
(+) (blue)
(-) (orange/white)
Reset
ALD-1R
Reset Wiring
N.O.
Reset
SPECIFICATIONS
Battery Life
Input
Count Speed
Accumulator
Timer counts
Digit Size
Display
Range
10 years nominal
Contact or solid-state switch
100 counts per second
One-hour or 0.1-hour increments
0.2" (0.51 cm) high
5-1/2 digit
0-199999
Reset
Push button or remote contact
Operating Temperature 32 to 122F (0 to 50C)
Panel Cutout
1.0"H x 2.0"W (2.54 x 5.08 cm)
Bezel
1.1"H x 2.09"W x 1.72"D
(2.79 x 5.3 x 4.37 cm)
Weight
0.13 lb (0.06 Kg)
Warranty
2 years
ORDERING INFORMATION
MODEL
ALD-1
ALD-10C
ALD-1C
ALD-1R
102
888-397-5353 USA
DESCRIPTION
LCD push-button resettable accumulator counter
LCD run-time remote reset clock, one-hour increments
LCD run-time remote reset clock, 0.1-hour increments
LCD remote reset accumulator counter
kele.com
March
March
20142014
NEW!
Flashing Beacons
LED
Halogen
Use in areas where high light output and long life are
considerations. Halogen light sources work well in high
ambient light areas. However, halogen bulbs tend to perform
unfavorably in high vibration environments.
Strobe Lights
Incandescent
Steady Beacons
Strobes
Strobes are known for their exceptional bright burst of light
energy. A strobe light passes a brief, intense pulse of electric
current through a gas, which then emits a brilliant burst of
light. The gas is usually one of two inert gases, xenon or
krypton. Strobe lights are very vibration resistant and will
function for thousands of hours before requiring
replacement.
Suffix
Voltage
Suffix
Voltage
-AQ
24V AC/DC
-G5
24V AC 50/60 Hz
Magenta
-E1
12V DC
-GW
24-28V DC
-EK
12-48V DC
-MP
72-125V DC
Red
-FJ
20-30V DC
-N5
120V AC 50/60 Hz
-FY
36V DC
-R5
240V AV 50/60 Hz
24V DC
-S1
250V DC
-G1
March 2014
WE MAKE IT EASY.
kele.com
888-397-5353 USA
103
6", 8", and 10" bells are used for alarms over large areas
such as distribution centers. 4" bells are used for smaller
applications. Single stroke bells are most useful for paging
applications.
Vibrating Horns
Used to signal attention and equipment condition in process
control lines and other areas requiring human interface.
Buzzers
Most often used for local annunciation of noncritical events
but can also be used when a distinctive paging signal is
required.
Chimes
Suitable for relatively quiet locations to page or locally
annunciate.
Sirens and Outdoor Warning Signals
For use in general services and emergency warning over
large geographic areas.
Multiple Tone Signals
Used in stand-alone and signaling systems that require
multiple tone selectability and flexibility.
Voice Signals
Used where the delivery of specific instructions are required.
104
888-397-5353 USA
kele.com
5. Mounting Considerations
The surface that the signal is mounted on can markedly affect
the signals performance. A horn, for example, should be rigidly
mounted to a sturdy surface so that all of its energy is directed into
the sound output and not absorbed by the wall. A
buzzer, however, can sound much louder if mounted on a
resonant surface because it will act as a sound board for the
device.
Suffix
Voltage
Suffix
Voltage
-AQ
24V AC/DC
-G5
24V AC 50/60 Hz
-E1
12V DC
-GW
24-28V DC
-EK
12-48V DC
-MP
72-125V DC
-FJ
20-30V DC
-N5
120V AC 50/60 Hz
-FY
36V DC
-R5
240V AV 50/60 Hz
-G1
24V DC
-S1
250V DC
March 2014