Directive 92/42/EEC :
CE Marking
PART 3
The views expressed in this publication do not necessarily reflect the views of the European Commission.
EuropeAid/114385/D/SV/CY
What is CE Marking ?
EuropeAid/114385/D/SV/CY
Principles of CE Marking
The CE marking affixed to appliance is a visible
declaration by the person responsible (the
manufacturer, the authorised representative, etc)
that :
the appliance conforms to all applicable Community
provisions,
the appropriate conformity assessment procedures
have been completed.
EuropeAid/114385/D/SV/CY
Appliances to be CE marked
CE Marking is not an option, it is mandatory :
It must be affixed before any product subject to it is
placed on the market and put into service
A product may not be CE marked, unless it is
covered by a directive providing for its affixing
EuropeAid/114385/D/SV/CY
The Law
The law is enforced through market surveillance
by appointed national enforcement agencies.
Imported products are checked for compliance at
customs offices.
EuropeAid/114385/D/SV/CY
Free circulation
Products bearing the mark will be taken as
meeting the requirements
and thereby entitled to free circulation throughout
the European Economic Area
provided that the equipment does in fact satisfy
those requirements
EuropeAid/114385/D/SV/CY
CE marking requirements :
The CE marking must take the form below:
EuropeAid/114385/D/SV/CY
Affixing CE marking
The CE marking must be affixed by the
manufacturer, or by the authorised representative
established within the Community
The CE marking should be affixed visibly, legibly
and indelibly
Where affixed on the appliance, it may be on the
product itself or on a plate attached to it
EuropeAid/114385/D/SV/CY
Affixing CE marking
Where a notified body is involved in the production
control phase according to the applicable directives, its
Identification number must follow the CE marking.
The manufacturer or the authorized representative
established in the Community affixes the identification
number, under the responsibility of the notified body.
EuropeAid/114385/D/SV/CY
Affixing CE marking
EuropeAid/114385/D/SV/CY
EuropeAid/114385/D/SV/CY
Directive EMC
Directive 90/396/EEC
Directive 92/42/EEC
Conformity Assessment
EuropeAid/114385/D/SV/CY
EuropeAid/114385/D/SV/CY
EuropeAid/114385/D/SV/CY
Manufacturers Obligations
Determine which Directives apply
Comply with the requirements of all applicable
directives
EC-Type Examination and Production monitoring
(or EC Unit Verification)
Draw up EC Declaration of Conformity
Establish Technical Documentation which must
enable the conformity of the gas appliance and
cover the design, manufacture and operation
Affix the CE Marking on conforming products
Maintain the required documentation as evidence
of compliance
Implementation of the Directive 92/42/EC
EuropeAid/114385/D/SV/CY
EuropeAid/114385/D/SV/CY