This is the new device Which I use lately, and I'm Satisfied with it in all
respects. It is one of the Selbstbau-Realization Project. I have changed it
a little bit. The original device operated with a 5mA current electrode. In
my opinion for it's a lot. I have modified the power generator, so now the
electrode current is 1.0 mA. Furthermore, I have added the polarity
changer, as it is a must.
I heat the distilled water During the production of colloidal silver. 220V,
50W-efficient halogen bulb is like the radiator, the same as what they'll
use to light with cupboards. As you can seen on the pictures, above the
light bulb, approximately 8 mm away there is a 5 mm thick iron plate this is the "chock". This piece of iron is hot When it functions, but the
distilled water in the glass is only around 40 C. It Reaches under this
Operating temperature 45 to 60 minutes, the time I wait to switch on the
colloidal silver-producing circuit after switching on the heating
Earlier. Heat Transfer Increases significantly - the Liquid Temperature Can
Be Increased to 50 degrees - Slightly if I lubricated the bottom of the jar
If this guide was Useful to you, please do not forget to "like"! Thank you.