Introduction
?? To demonstrate the Compositional modelling capabilities of PIPESIM.
?? Model used
o Gas well with compositional fluid model.
?? Workflow:
o Explain the GUI setup completion, NA point, tubing, choke, flowline, report card.
o Show the compositional fluid description and phase envelope .
o Run the Nodal Analysis operation.
o Run a Pressure Profile and show on phase envelope plot.
o Show a flow regime map.
?? This workflow demo does not attempt to build a case from scratch. To build a case study from scratch the training course material should
be followed.
Assumptions
?? PIPESIM 2000 v1.35 has been installed into the default directory on C:
?? The case study file Compositional Well Model Script.bps is available.
Step Objective
Action
Result
Comments
Model Setup
1.
2.
3.
4.
Show model
components
5.
Show
Calculate/Graph
option on IPR model
Close dialogs
6.
7.
8.
9.
10.
Select Setup->Compositional
Select Petroleum Fractions tab.
Select Component Selection tab.
Press the Phase Envelop button.
Press X in top right hand corner to
close plot.
Press OK to close compositional
dialog.
12.
Show sensitivity
values.
13.
Run model to
produce NA plot
14.
15.
Close PSPLOT
Close dialog
Data is saved by ok
18.
Create Pressure /
Temperature Profile.
Run model to
produce profile.
Show Pressure
Profile on Phase
Diagram plot.
Change series to :
X axis = Temperature
Left Y axis = Pressure
19.
20.
Close PSPLOT
Close dialog
Click OK
Press X in top right had corner
Press ok
PSPLOT closes
Dialog closes and data saved
Data is saved by ok
23.
24.
25.
Close BJEDIT
Close PIPESIM
BJEDIT closes
Save changes dialog appears
Figures: