IM-166
Instruction Manual
Thank you for choosing our electric appliance . Read this Instruction Manual carefully before
operation . Please keep it in a safe place and refer to it when necessary.
Description
Specification
Volt / Frequency
230V ~ 50Hz
Ice making current
1.1A
Ice Making Capability
12kg/24h
Rated Total Power
700W
Heating Power
550W
Ice Making/Cold water Power 150W
Ambient Humidity
90
Hot Water
3.5L/hour, 80
Cold Water
2L/hour, <10
Product Size W*D*Hmm 440*330*525
Climate Class
T
Ice making with cooling water current 1.5A
Ice Storage
1.0 kg
Hot water tank capacity
1L
Tank for cold water:
2L
Ambient Temperature
1043
Refrigerant/Quantity
R134a
Function
Instant making ice
Ice bin full alarm
Add water alarm
Hot Water Dispenser
Indicator Area
Warning, low water indicator
Time Display,first two digital is for hour,last two is for minute
Ice level indicator
Clock display
Setting the timer to turn On the Ice Making or Hot Water
Setting the timer to turn Off the Ice Making or Stop making Hot Water
Informs you that you are now setting the time for ice making
Informs you that you are now setting the time for hot water
Once illuminated, it means the water is Heated up to temperature and ready for use
Child Lock Display is on or off, if indicator is On, this means unit is Locked
Cold water function, once illuminated, water Cold and ready for use
Button Area
press this button to Start or Stop ice making and set time
press this button to Start or Stop making hot water
press this button to Start or Stop making cold water
press this button to set time or active the child lock
press this button to dispense cold water
press this button to dispense hot water
Note: Please do not touch hot water as the temperature may be too high
press this button to power on the machine
Operating Instruction
Step 1: Add water
If bottled water is used, remove the paper seal and plastic, then tip bottle onto the cleaver seat, water
will release into the machine automatically.if pipe is used,
Step 3: Press the right buttons to start the function you want.
NoteAfter the water is filled, press
faucet lastly press
firstthen
for making hot water so as to avoid the heater going into automatic
protection
Note: For the first three cycles, the ice may be small and irregular in size.
If no water is pumped up to the water tray over two cycles, then please open the
drain cap and let several drops water runs out.
Step 4: Getting hot /cold water / ice
4.1 Hot water: Press button
then
directly
4.3 Ice: Pull the ice drawer out and take ice with the ice scoop
Step 5: Set timer:
You can set the clock to automatically turn on and turn off time via following steps:
5.1 Setting The Clock:
Long press on the
button till the figures at the indicator area is Illuminated then press the
and
and
appear,
A5. When you are finished and the figures are not illuminated, long press on the
indicator
button till
is on.
and
appear,
B5. After the setting is finished and the figures are not illuminated, long press on the
till indicator
button
is on.
appear.
is on
and
appear,
button till
indicator
is on.
5.6 Time setting for turning hot water function on and off,
follow step A1,A2,A3,A4,B2,B3,B4,C1,C2,C3,C4,D1,D2,D3,D4 after the setting is finished and the
figures stop shinning , long press on button
till indicator
and
are on.
Trouble Shooting
Problem
The compressor works
abnormally with a
Buzzing noise
Ice connected each other
and cant drop down
Possible Cause
The voltage is too low
Suggested Solutions
Stop the Icemaker and do not
restart until the voltage is
normal.
Cut off the power right
away,restart the unit unit all the
ice in the water tray melt down
1. Shift the evaporator
3. Replace the magnetic valve
1. Change machine to other place
and restart
2. Change Fan
3. Call service
1. Add water
2. Move the material which
blocks the mouth/pipe
1.Wait for a while to get water
2. Make sure power is provided
3.Cooling in first time, wait
2hours to get water
1.Take off the bottled water right
away,and drain all the water
completely,then put back the
bottled water
2.Replace water pipe
3.Replace non-pressure valve
Replace the pump
Clean it with 5 edible citric
acid to clean it
WARNING
If the supply cord is damaged; it must be replaced by the manufacturer, its service agent or a
similarly qualified person in order to avoid a hazard
If the supply cord is damaged in any way, it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a hazard.
R-134a is a fluorinated greenhouse gas covered by the Kyoto Protocol,its global warming potential is
1300.Please keep the unit well.