Headset
Operating Instructions
WARNING
To prevent fire or shock hazard, do not expose the unit or rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified technician only.
SPECIFICATIONS
Earphone Speaker Specification:
Power handling capacity
Rated power: 50mW, Max power: 100mW
Frequency response
FO~2.8 KHz
Sensitivity
1143dB
Buzzes& rattles
1.26V at.100Hz~2 KHz
Humidity
-252 90~95%RH 48 hours
Microphone Specification:
Transducer
Electrets condenser microphone with sponge
Sensitivity After assemble
-39dB5dB@1KHZ Vs=5.0V RL=3.32K,0dB=1V/Pa
Driver
-39dB5dB@1KHZ Vs=5.0V RL=3.32K,0dB=1V/Pa
Impedance
Max:3.32K @1kHz
Directivity
Uni-directional
Frequency
100~10KHz
S/N ratio
60dB @1KHZ
1
HOW TO USE
1
Wear the headset marked RIGHT on your right ear, and the one marked LEFT on your
left ear.
Position the microphone in front of your mouth by turning the Microphone adjuster.
Use volume control slider for adjusting the volume level of the headphone.
PRECAUTIONS
Preventing hearing damage
Avoid using headset with the volume turned up for an extended period of time. Doing so can damage
your hearing. It is advisable to keep the volume at a moderate level at all times.
Caring for others
Remember not to disturb people around you with the sound leaking from your headset. Keep the
volume level moderate even in noisy places so that you will be able to hear other people when they
talk to you.
Notes on usage
1
Do not put weight or pressure on the headset as it may cause the headset to deform during
long storage.
2
Do not subject the headset to strong shock by dropping or banding.
3
Handle the unit part with care.
4
Do not leave the headset in a location subject to direct sunlight, heat or moisture.
5
Leaving the plug dirty may cause sound distortion.
6
Clean the headset with a soft dry cloth.
7
Do not use strong solvents (e.g. alcohol, etc) when cleaning the headset.
8
The earpads may deteriorate due to long-term storage or use.
TROUBLESHOOTING
Symptom
Possible Cause
Remedy
Sound of the The headphone plug is not Connect the headphone plug
headphone is low. connected to the jack
properly.
properly.
The volume control of
your computer or the volume
level of the running
application is turned down.
Sound of the The CPU of your
headset
and computer is overloaded.
recorded
sound
are disrupted
Cannot
record The microphone plug is
sound from the not connected to the
microphone
microphone jack.