SOLTEQ
MODEL: BP 60
AGENT:
Sales Office :
No.3, Jalan TPK 2/4, Taman Perindustrian Kinrara,
47100 Puchong, Selangor Darul Ehsan, Malaysia.
Tel. No. : +(603) 80758000
Fax. No. : +(603) 80755784
R&D Office :
G-2A, Incubator 3, Technology Park Malaysia,
Bukit Jalil, 57000 Kuala Lumpur, Malaysia.
Tel. No. : +(603) 8996 0023
Email
: solution@solution.com.my
Web site : http//www.solution.com.my/
HIS Liquid-Liquid Extraction Unit (Model: BP 60) has been designed for student demonstration on a
liquid-liquid extraction and solvent recovery processes. This mobile unit basically consists of an extraction
system and a solvent recovery system. The extraction system consists of a DN50 packed column, feed
tanks, feed metering pumps and collection tanks. The solvent recovery system consists of a DN50 packed column,
a reboiler, a condenser, and a distillate tank. Sample points are provided at key positions around the unit allowing
students to conduct liquid-liquid extraction experiments and solvent regeneration.
BUATAN MALAYSIA
SOLTEQ
MODEL: BP 60
EXPERIMENTAL CAPABILITIES
Study of mass balances of the system.
Effect of feed flow rates on the extraction efficiency.
Study the hydrodynamics of liquid-liquid systems.
Operation of a liquid-liquid extraction and solvent
recovery system.
Effect of solvent to feed ratio on the extraction
efficiency.
Study on the effect of organic and aqueous phase
as the continuous phase.
Determination of the number of theoretical plates for
the extraction column.
SPECIFICATIONS
a) Extraction Column (K1)
Size
: DN50 x 1.50 m
Material
: Borosilicate glass
Packings : 10 mm glass Raschig rings
b) Feed and Solvent Tanks (B1/B2)
20-L stainless steel tanks for feed and solvent
storage.
c) Feed Pumps (P1/P2)
Chemical resistant metering pump
Capacity
: Max. 18 L/hr
d) Extract and Raffinate Tanks (B3/B4)
20-L stainless steel tanks for receiving raffinate and
extract products from the column.
Option to direct either product to the reboiler (B6) for
solvent recovery in the distillation column.
OPTIONAL ITEMS
UTILITY REQUIREMENTS
- AI
ANALYTICAL INSTRUMENTS
f) Reboiler (B6)
5-L vessel made of stainless steel.
Heating
: 1 kW immersion heater (W1)
Low-level safety switch
i) Portable Refractometer
- DAS
SOLDAS DATA ACQUISITION SYSTEMS
OVERALL DIMENSION
g) Condenser (W2)
Water cooled condenser made of stainless steel.
Exchange area
: 0.3 m2
- CAL
SOLCAL COMPUTER AIDED LEARNING SOFTWARE
i)
ii)
iii)
iv)
Height : 2.50 m
Width : 1.22 m
Depth : 0.61 m
MANUAL
The unit is supplied with Operating and Experimental
Manuals in English giving full description of the unit,
summary of theory, experimental procedures and typical
experimental results.