Version 20/03/2014
SikaProof SB TH
Construction
Uses
Waterproof and anti-corrosive coating for buried concrete structure ,etc.
Anti-corrosive coating for steel beam & pipe, plate, silos and tanks.
Waterproof and anti-corrosive coating for Basement.
Underground structure , Floor slab,Terrace / Balcony
Wet area
Buried wall Reinforcement coating for the incline of road and waterproof
and anti-corrosive coating for underground cave
Characteristics /
Advantages
60% solids type, non-toxic water base.
Ultra fast set making applicable on the inclined or vertical surface without
sagging and short down time.
Excellent physical properties such as chemical, impact, abrasion, cold,
heat, water resistance and durability.
It is easy to apply and easy to adjust no limitation in thickness control.
High temperature stability up to 80C.
High elongation for crack bridging.
Good adhesion strength with a variety of substrate.
Rapid application rate up to 1,500 m2/day
Easy to apply by use dual component airless spray.
Seamless event overlapping.
Retains flexibility at low temperature
Get time within 2-3 minutes, eliminate risk of rainfall
Economical
Form
Appearance
Packaging
SikaProof SB TH 1/3
D01414000314E
Storage
Storage Conditions
Shelf Life
Part A = 12 months
Part B = 12 months
Technical Data
Type
Viscosity
Specific Gravity
Mixing ratio
(Volume)
Part A = 10-14
Part B = 1
Solids Content
Part A = 60%
Part B = 50%
Mechanical /
Physical Properties
Gel Time
Within 4 minutes
Post Cure*
12 hours
*Complete polymerization to achieve final strength can take up to
several weeks, depending on a variety of conditions.
Recoat
Within 30 minutes
Tensile Strength
>2 Kfg/cm2
Tear Strength
>0.2 Kfg/cm
Elongation
>2000 % at 25C
Hardness
< 40 Shore A
System
Information
Application
Instructions
Cleaning of Tools
Notes on Application /
Limitations
Minimum material/container temperature for spray application is 5C
(68F)
Read and observe all precautions, instructions, and limitations that are
included with all containers of SikaProof SB TH.
SikaProof SB TH 2/3
Local Restrictions
Construction
The information, and, in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith
based on Sikas current knowledge and experience of the products when properly stored, handled and applied under normal conditions in
accordance with Sikas ecommendations. In practice, the differences in materials, substrates and actual site conditions are such that no
warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever,
can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product
must test the products suitability for the intended application and purpose. Sika reserves the right to change the properties of its products.
The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must
always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
SikaProof SB TH 3/3