User Manual
Please read this manual before using and
save this manual for future reference
General
Power Requirement 14.4DC
Load Impedance 4ohm Precautions 2
Max Power Output 60W 4
Tone Control +/-8DdB(Bass100Hz,Treble 10KHz) Panel illustration 3
Dimension Approx,192 188 105mm(D W H)
Mounting Dimension Approx,169 178 100mm(D W H)
Main menu 5
Weight Approx.2.15kg
Media player 6
DVD Deck Section
Disc Played DVD/VCD/2.0/MP3/MP4(DIVX/CD/Picture-CD) Bluetooth 7
Video System PAL/AUTO/NTSC
AV IN 8
36 1
This unit can play the following disc only: STANDARD CONNECT
Type of disc Label on the disc Recorded material Size of disc
Sound and moving
pictures
Sound only
Do not attempt to modify the unit. ----Do not use CD with paste residue
Unauthorised modification may or ink on the surface
damage the unit.
2 35
Problem Cause/solution
Note:If any of the problem persist, consult your nearest service dealer.
Never attempt to disassemble the unit by yourself.
34 3
Mode button
Mounting Example
Eject bu tton
Press it to select source in the A. When there is no disc in the unit,
following order: press it and the front panel will
This mounting method is used for Japanese cars.
flip down to shown the disc slit in The actual mounting method should depend on
the main unit, Insert the disc into the types of the cars.
the CD slot, and the mechanism Notes: 1.Store small articles that are not accessible
wills automatically playback the to children.
Reset butto n 2.Install only with the supplied screws.
Disc. 3.Installation varies depending on the
Operating the unit for the first time or type of cars and unit installed by
after replacing the car battery , you qualified technician.
B. When there is a disc in the unit,
must reset the unit. Press this button press it, the front panel will
with a pointed object (such as a automatically flip down and eject
ballpoint pen) to set the unit to initial the disc, if you don t take the Bracket
status. disc away within 5 seconds, the
Note: When errors occur on the LCD mechanism will automatically slot
display ,you can also press RESET in the disc, lock the front panel and Existing parts supplied
select radio mode. with your car
button to clear the error, It will erase
the clock setting and some
memorized functions.
Power button Installing the front panel
A. Under sleeping mode, press it to
Touch scree n turn the unit on, and the unit will
Press any place on the touch screen, automatically select radio mode.
the corresponding touch menu will B. Under working mode, press and hold
display on the screen under different the button for more than 3 seconds to
Mode, pleas refer to corresponding return the unit off.
Chapter below for operation in
details. GPS button Detaching the front panel
Press it to unter the GPS menu, press
Angle button it again to return to the initial status. Be sure to press before
detaching the front panel. To
Press it to adjust the angle of the front detach panel, press the latch
panel, and there are totally four shown n the left.
angles optional.
Precautions
Remote control sensor
Sensor for the card remote commander. Do not touch the front panel connection
(For remote control version only) on the unit body, since this may result in poor
electrical contact. If dirt or dust get on the
Note: This window is used with remote contacts, wipe them with c clean ,dry cloth.
control function. Without this
function,you should ignore the
operation contents about remote
control function.
4 33
Parts List(The numbers in the list are keyed to those in the instructions.)
Bluetooth GPS
Fasten the rear bracket screws and
back side harness, and fix the unit
Well.
AV in Radio
Setup TV
32 5
5.Parameter display
After selecting the desired mode.
you can adjust its level by pressing
Area 5 , and the corresponding ZOOM KEY
Parameter will display in this area. To set the operating modes for Dolby
Digital decoder . --In DVD VCD playing mode,
press 25 (ZOOM) key once for
b. Dynamic Range 1.5x Mode, twice for 2 x Mode.
Third time for 3 x Mode, forth
Press it to select track upward, Press
time for 1/2 mode, fifth time for
and hold it for more than 3 seconds
1/3 mode, sixth time for 1/4 mode.
to fast forward the track.
Note: No ZOOM function CD/MP3 playing
. Mode.
7.MORE:
Press it to display more menu. To set dynamic range compression
1.PLAY/PAUSE key
Press it to pause the playback, and c. Dual Mono
press it again to resume to normal 8.MODE key
Playback. Press the button to return to main menu.
2.MUTE key
Press it to cut off the sound output, 9.TA key(optional)
And appears in the LCD; Traffic program/Traffic Announcement.
Press it again to cancel the MUTE TA function on/off.
To set the stereo mode.
function.
6 31
SPDIF/PCM: b. Contrast
When the player is connected with the 10.RPT key Bluetooth
2 channels, digital stereo amplifier, Repeat function. Press it to repeat the
please select this item when the current track/chapter; Press it
playing disc is recorded in Dolby Again to repeat the title; Press it
digital or MPEG. The analog or optical The third time to repeat all; Press it
output will be modulated to 2 channels The fourth time to cancel the repeat
output by PCM. function.
Note: This function is in invalid for this
model.
b. Key 11. RDM key
Press it to play the disc in random,
c. Hue Press is again to resume normal
Playback.
30 7
USB Player
Exit the touch menu.
The unit can be connected to a USB
7.Status bar device for playing MP3/MP4/JPG files C. AUDIO SETUP
Display status of the connection through the USB cable. SPDIF/OOF:
or phone number. All the touch keys keep the same Analog or optical output port has
functions and operate in the same a. OSD Language
no output signal at all.
way as other modes, For details of
this operation, please see main a. AUDIO Out
AV IN section in Media player chapter.
8 29
(5)BEEP
Keypad tones setting on/off.
28 9
7.Back
Return to main menu
Note : This function is invalid for this model
10 27
GPS Operation
Setting CD Playback Time Stop the Playback
--In VCD CD mode, press 18 --In DVD mode, press 20 Safety Notices and Warnings
(GOTO) key and set the time when button to suspend the playback
you begin to play the track, and and press Play to continue. Global Positioning System(GPS is operates and controlled under the
the television will display the Press it again to stop the playback. sole responsibility of the Government of the United States of America,
time --:--. Enter your desired time who are responsible for its availability and accuracy. Any change in GPS
by pressing number button 14 availability and accuracy, or in environmental conditions, may impact the
(0~10+).For example, enter: operation of your Navistar.
25:00, and press 6 (ENTER) to
confirm. It will automatically start MULTI-ANGLE KEY Use this product prudently. The product is to be used only as a
playing the track from the point of --In DVD playing mode, press 21 navigation aid. It is not for precise measurement of direction, distance,
twenty-fifth minutes in the disc. (ANGLE key to watch the DVD location or topography.
Content from different angle.
--In DVD playing mode, press 18
(GOTO) key once and input a When the artificial satellite carrying out GPS first fixes position, stay
desired track number, Then press in thesame place please, use more spacious that place is suitable , superjacent
6 (ENTER) key to play the DVD SLOW KEY
have not to blocking anything. Need to look at environment that time and
from the position corresponding to artificial satellite signal intensity but fix above waiting for the ten
the track number selected. --In DVD/VCD playback mode, press
22 (SLOW) key once for / slow, twice minutes.
--In DVD playback mode, press 18 for 1/3 slow, thrice for 1/3 slow, and
(GOTO) key once and input a so on. When the key is pressed the For your own safety, do not operate the controls of the product while
Desired time to play the DVD from seventh time, it will return to normal driving.
the position corresponding to the Playback.
time selected. For example, press GPS satellite signals can not pass through solid materials(except
Note : Not applicable in Mp3 and CD
18 (GOTO) key once and the playback. glass).When you are inside in a tunnel or building, GPS positioning is not
television will display the time--:--:-- available. Signal reception can be affected by situation such as bad
Enter your desired time by pressing weather or dense overhead obstacles (e.g. trees and buildings)
number button 14 (0~10+). And 4
direction button, Then press 6
(ENTER) button, it will automatically
The wireless devices might interfere the reception of satellite signal
start playing the track trom the point and cause the reception of the signal to be unstable.
of your desired time in the disc.
Note: No time play function for Mp3
.
When you get off the car, do not leave your device on the dashboard or
the car glass that is subject sunlight. The overheating of the battery can
cause malfunction and/or danger.
The windshield receives paste the paper which be used for adiabatic or
Mode Switch preventing explosion, will disturbed the signal quality. For better signal
--Press 19 (MODE) button to reception, it is recommended that you can choose adiabatic paper of not
Switch to radio mode or playback containing metal matter or use a car antenna(option).
Mode.
The calculated route is for references only. It is user's responsibility to
follow the traffic signs and local regulations along the roads.
26 11
Note: In VCD MP3 CD mode. The Note: There are 5 different surrounding
Initial setting is repeat playing Effect in surround mode. During
VCD mode, you can see the different
All the tracks. Pictures indicating different effects
Note :In radio mode, press 12 On the television.
(AMS/RPT)to scan each stored
Station for 10 seconds.
Playing PBC (menu)
--During VCD mode only, when
pressing 16 (PBC) button at
Random Playing
the first time, PBC playback starts
The system menu provides the Volume , Backlight , NaviSetting -- During playback mode, press 13
and the menu of entire disc appears
Calibrate , Language , GPSTest , and Return for choose, the (RDM) button to play any track at
on the television. And then you can
introduction are in the following chapters. Random.
select your favourite track by using
number button 14 (0~10). When a
track is playing ,you can press 20
(STOP/RETURN) button to return
Number Buttons
to the menu if you want to stop to
-- During radio , you can select
select other tracks. To cancel PBC
one of the 6 stored stations
playing, press 16 (PBC) button
on each band by pressing
again.
any one of the number
button 14 .
--During the playing mode,
you can select any track directly
by using 14 number button (0~10+).
Subtitle Selector
for example, if you need the fifteenth
1.1.Volume track, you can first press button 10+
--During DVD mode, press 17
Examine or set up the system's volume. and then press button 5, the
(SUB-T) button to switch the menu
corresponding track (15) will be
1)Press the Config Icon on the main menu and then enter into the system to Chinese or English.
Played.
Set-up functions.
2)Press the volume Icon on the set up menu.
Note: When button 10+ is first pressed, it works
as 10+ , it works as 20+ when pressed at
the second time, the third...30+....and so
on and so forth. In PBC playback mode,
number button is not functional.
12 25
Program Playing
--During CD VCD mode ,you
can set the program order to play.
You can follow the steps below: Repeat Playing /AMS
first, press 16 (PBC) button, and During DVD mode, first, press 12 3)Click can auto run navigator application with start. Press
then press 9 (PGM) button, and (AMS/RPT) to repeat the current
the television displays track being played; Press it again to button can enter the interface of the way choice.
programming P00:00. You can set repeat playing All the tracks.
the program order to play by pressing Pressing it the third time will cancel
14 (0~10+)button, and then press 2 the repeating function. (LCD will
toPlay. display different designs)
Note: program doesn t function
when playingMP3.
24 13
-- Press 4 to select
Your desired menu. Then press
6 (ENTER) or press the play
Button 2 ( ) to confirm.
In this menu, can transform the system language into English, traditional Chinese
as well as simplified Chinese. Setting complete, press to save the setting Note: This function works in main menu
and press exit. mode only.
3.Insert the Battery Holder into the
Remote Control.
1.6.GPS Test
Band/System Switch
You can know the secondary planet and the orientation from this interface. Click
can exit.
You can know the secondary planet and the orientation from this interface.
14 23
Click can exit.
Chapter 2.MP3
This chapter introduced how to uses Audio player.
Insulator
2.1.Audio player program
Please take off the insulator 1. Select the MP3 icon on the main menu.
Before using the remote. 2. The program use as MP3 player. The function
characteristic includes:
Play the Audio file/files.
Basic control: play, pause, next song, previous song
Order play and circle play
Press the list icon and then enter the playlist
3. Press leave the player's interface but still play music in
other interface. Press will leave the Audio player program.
1 Power Switch 13 Random Playing 2.2.Prepare your Audio file
2 Pause/Play Button 14 Number Button Before you use the Audio player program, you must prepare a SD
3 Mute Button 15 Audio-setting card to store your Audio file/files, Insert the SD card into the slot.
4 Selecting Menu Button When you turn on the program, system may automatic sense the
16 PBC Menu Audio file/files.
5 Band/System Switch
17 Subtitle-Setting
6 Enter Button 18 Playing Time-Setting 2.3.Play music
7 Volume control 19 Mode Switch 1. Select the MP3 icon on the main menu then enter the program.
8 Tuning/Selecting 20 Stop/Reverse Button 2. Press ,start playing. Other button's functions show in the
Tracks/F.F/REW following introduction.
21 Angle-Setting
9 Program Playing
22 Slow-motion Play 3. The file sensed by the program will become a playlist.
10 On-Screen Display
23 Setup Menu This program support the format of MP3 WMA and WAV, etc.
11 Setting the Sound
Characteristics 24 Menu-Display
12 Re peat Playing 25 Zoom-Setting
22 15
16 21
20 17
3.4.Play control
Radio(RDS is optional) 3.PTY key
Video player program can controlled by buttons. Their functions see Press PTY key to select program type:
in table2.
18 19