BUT 28
Data
170-210 bar
700 kg
480 x 690 mm
BUT 28
7321
8571
781
o
1250
30
1250
2100
27o
360o
2700
5476
45o
45o
45
45
500
Centre of gravity
R58
90
50
9851 2123 01
Main features
360 degrees feed roll-over gives full coverage of the tunnel face
Stability
The robust and stable structure of
BUT 28 allows the feed to be
firmly braced against the face with
a force of up to 17.5 kN. This
provides for stable and straight
collaring of the hole, a prerequisite
for correct hole alignment.
Hydraulic hoses
Automatic boom
lubrication (option)
Versatility
The BUT 28 boom can align and
position the feed to meet all
drilling angles and drilling patterns.
With a rotation angle of 360, the
feed can be rolled to position the
rock drill extremely close to the
tunnel wall for drilling of contour
holes. Look-out angles are set
with the tilt cylinder and the feed
returned to parallel alignment with
the control lever. This enables
precision drilling of contour holes
with a minimum of overbreak.
For roof drilling the feed is directly
swung into vertical position using
the tilt cylinder. This then orients
the rockdrill towards the operator,
Coverage area
The boom features the horse-shoe
type of coverage area without
blind spots, easily adaptable to the
tunnel profile.
Options
1
Expanding shafts
Boom joints for the cylinders are
fitted with adjustable expanding
shafts. Boom accuracy and operational precision can be maintained
throughout the entire service life of
the equipment, simply by tightening a nut.
9
8
7
6
3
4
2
5
2