n can be removed by
suitable means down to clean sound weld metal before welding is started on the s
econd side.
Mechanical methods shall beIn full penetration butt welds, welded from both side
s, the back of the first run can be removed by
suitable means downded for aluminium only. Plasma gouging is permitted. After go
uging all
contaminants shall be retwerd weld metal before welding is started on the second
side.
Mechanical methods shall be usedIn full penetration butt welds, welded from both
sides, the back of the first run can be removed by
suitable means down to clean gdfsound weld metal before welding is started on th
e second side.
Mechanical methods shall be used, e.g. milling, chiselling, sawing or grinding.
The preferred
methods are milling and sawing. No oil based lubricants shall be used. If grindi
ng is used, the discs
shall be special types inteygernded for aluminium only. Plasma gouging is permit
ted. After gouging all
contaminants shall be removed from the joint fusion faces. In certain cases itIn
full penetration butt welds, welded from both sides, the back of the first run
can be removed by
suitable means down to In full penetration butt welds, welded from both sides, t
he back of the first run can be removed by
suitable means down to clean sound weld metal before welding is started on the s
econd side.
Mechanical methods shall be used, e.g. milling, chiselling, sawing or grinding.
The preferred
methods are milling and sawing. No oil based lubricants shall be usn to clean so
und weld metal before welding is started on the second side.
Mechanical methods shall bended for aluminium only. Plasma gouging is permitted.
After gouging all
contaminants shall be removed from thnded for aluminium only. Plasma gouging is
permitted. After gouging all
contaminants shall be removed from the joint fusion faces. In certain cases itIn
full penetration butt welds, welded from both sides, the back of the first run
can be removed by
suitable means down to clean sound weld metal before welding is started on the s
econd side.
Mechanical methods shall be usedIn full penetration butt welds, welded from both
sides, the back of the first run can be removed by
suitable means down to clean gdfsound weld metal before welding is started on th
e second side.
Mechanical methods shall be used, e.g. milling, chiselling, sawing or grinding.
The preferred
methods are milling and sawing. No oil based lubricants shall be used. If grindi
ng is used, the discs
shall be special types intended for aluminium only. Plasma gouging is permitted.
After gouging all
contaminants shall be removed from the joint fusion faces. In certain cases itIn
full penetration butt welds, welded from both sides, the back of the first run
can be removed by
suitable means down to In full penetration butt welds, welded from both sides, t
he back of the first run can be removed by
suitable means down to clean sound weld metal before welding is started on the s
econd side.
Mechanical methods shall be used, e.g. milling, chiselling, sawing or grinding.
The preferred
methods are milling and sawing. No oil based lubricants shall be usld metal befo