Catalog 4110-NV
December 2010
Overview
Catalog 4110-NV
ii
Table of Contents
Catalog 4110-NV
Description............................................................................................Page
V Series Needle Valves Integral Bonnet, 5,000 PSI Maximum*................ 2
VQ
NP6
SN6
PV
MPN
Cyl &
Acc
End Connections........................................................................................ 50
End
Conn
Offer of Sale............................................................................................... 51
* Actual pressure rating will be determined by the valve configuration, body material, seat material and other factors.
PROPERTY DAMAGE.
This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users
having technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance,
maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the
information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible
for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.
Offer of Sale
The items described in this document are hereby offered for sale by Parker-Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by
the provisions stated in the detailed Offer of Sale elsewhere in this document or available at www.parker.com/ipdus.
Catalog 4110-NV
Introduction
Parker V Series Needle Valves are designed for positive leak tight shut-off and regulation of fluids in process,
power, and instrumentation applications. With a wide variety of port sizes and styles, temperature capabilities
ranging from -65F to 450F (-54C to 232C) and pressures to 5000 psig (345 bar), V Series Needle Valves
provide the user with the utmost in flexibility when designing miniaturized tubing or piping systems.
Features
Choice of three stem types:
R-Stem All metal, blunt stem tip
N-Stem All metal, tapered needle stem tip
K-Stem PCTFE stem tip
Differential hardness between the strain
hardened stem and cold formed body threads
provides improved cycle life
Choice of PTFE packing or elastomeric O-ring
stem seals
316 Stainless Steel, Steel, Brass and Monel
Alloy 400 construction
Inline and angle patterns
Wide variety of US Customary and SI ports
Panel mountable
100% factory tested
Optional color coded handles
Specifications
Pressure Ratings:
316 Stainless Steel: 5000 psig (345 bar) CWP
Brass, Steel and Monel Alloy 400:
3000 psig (207 bar) CWP
Orifice: 0.078" to 0.312" (2.0mm to 7.9mm)
CV: 0.12 to 1.90
Port size: 1/8" to 3/4" (3mm to 12mm)
Temperature Ratings:
Stainless Steel and Monel Alloy 400:
-65F to 450F (-54C to 232C)
Brass: -65F to 400F (-54C to 204C)
Steel: -20F to 350F (-29C to 177C)
PTFE Packing:
-65F to 450F (-54C to 232C)
PCTFE Stem Tip:
-65F to 350F (-54C to 177C)
Nitrile Rubber Stem Seal:
-30F to 250F (-34C to 121C)
Fluorocarbon Rubber Stem Seal:
-15F to 400F (-26C to 204C)
Ethylene Propylene Rubber Stem Seal:
-70F to 275F (-57C to 135C)
Materials of Construction
(with PTFE Packing)
3
8
6
4
7
Note: When combining body, seat and seal materials, the most
restrictive temperature rating becomes the limiting factor on
temperature range.
Monel Alloy 400 is the registered trademark of Special
Metals Corporation.
Catalog 4110-NV
Stem Types
PCTFE tipped
Needle (2-1/2)
Blunt (30)
Part Description
Body
Packing Nut
Handle*
4
5
6
7
7A
8
9
Lower Packing
Washer
Handle Screw
Packing**
Stem
( R and N Stem)
Stem
(K Stem)
Upper Packing
Washer
Panel Nut***
Stainless Steel
ASTM A 182
Type F316
ASTM A 479
Type 316
Nylon 6/6
with SS insert
ASTM A 479
Type 316
Stainless Steel
PTFE
ASTM A 276
Type 316
ASTM A 276
Type 316,
with PCTFE
Brass
ASTM B 283
Alloy C37700
ASTM A 479
Type 316
Nylon 6/6
with SS insert
ASTM A 479
Type 316
Stainless Steel
PTFE
ASTM A 276
Type 316
ASTM A 276
Type 316,
with PCTFE
Steel
ASTM A 576
Grade 1214
ASTM A 479
Type 316
Nylon 6/6
with SS insert
ASTM A 479
Type 316
Stainless Steel
PTFE
ASTM A 276
Type 316
ASTM A 276
Type 316,
with PCTFE
Brass
Brass
Brass
Brass
ASTM B 164
with PCTFE
* Handles for V8 and V12 Series Valves with R and N Stems are aluminum T-bars.
** Optional O-ring elastomeric stem seals are available See How to Order.
*** Panel Nut is nickel plated brass on V2 Series Valves. Panel Nuts must be ordered separately see page 10.
Lubrication: Perfluorinated Polyether
Catalog 4110-NV
.94
(23.9)
.94
(23.9)
.43 (10.9)
.43 (10.9)
Model Shown:
2M-V2LN-SS
.31 (7.9)
A
Basic
Part Number
Inline
Angle
2A-V2LR 2A-V2AR
2A-V2LN 2A-V2AN
2A-V2LK 2A-V2AK
2F-V2LR 2F-V2AR
2F-V2LN 2F-V2AN
2F-V2LK 2F-V2AK
2M-V2LR 2M-V2AR
2M-V2LN 2M-V2AN
2M-V2LK 2M-V2AK
2Z-V2LR 2Z-V2AR
2Z-V2LN 2Z-V2AN
2Z-V2LK 2Z-V2AK
4A-V2LR 4A-V2AR
4A-V2LN 4A-V2AN
4A-V2LK 4A-V2AK
4Z-V2LR 4Z-V2AR
4Z-V2LN 4Z-V2AN
4Z-V2LK 4Z-V2AK
Model Shown:
2F-V2AR-V-SS
.31
(7.9)
End Connections
Inlet
Outlet
(Port 1)
(Port 2)
1/8" Compression A-LOK
Stem
Type
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Orifice
Inch mm
0.078
2.0
0.093
2.4
0.093
2.4
0.078
2.0
0.078
2.0
0.078
2.0
Flow Data
Inline
CV
XT*
0.12 0.78
0.12 0.80
0.13 0.83
0.13 0.61
0.12 0.66
0.12 0.73
0.13 0.61
0.12 0.66
0.12 0.73
0.12 0.78
0.12 0.80
0.13 0.83
0.12 0.78
0.12 0.80
0.13 0.83
0.12 0.78
0.12 0.80
0.13 0.83
Dimensions
Angle
CV
XT*
0.14 0.67
0.14 0.63
0.14 0.63
0.16 0.49
0.18 0.39
0.17 0.54
0.16 0.49
0.18 0.39
0.17 0.54
0.14 0.67
0.14 0.63
0.14 0.63
0.14 0.67
0.14 0.63
0.14 0.63
0.14 0.67
0.14 0.63
0.14 0.63
* Tested in accordance with ISA S75.02. Gas flow will be choked when P1 - P2 / P1 = XT.
For CPI and A-LOK, dimensions are measured with nuts in the finger tight position.
Inch
mm
Inch
mm
1.01
25.7
1.01
25.7
0.94
23.9
0.94
23.9
0.75
19.1
0.75
19.1
1.01
25.7
1.01
25.7
1.09
27.7
1.09
27.7
1.09
27.7
1.09
27.7
V4 Series
1.38
(35.1)
Model Shown:
4M4Z-V4LK-SS
.43 (10.9)
Model Shown:
4A-V4AN-BN-B
.43 (10.9)
.41 (10.4)
A
.41
(10.4)
Catalog 4110-NV
End Connections
Inlet
Outlet
(Port 1)
(Port 2)
1/8" Compression A-LOK
Stem
Type
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Orifice
Inch mm
0.078
2.0
0.176
4.5
0.125
3.2
0.078
2.0
0.176
4.5
0.176
4.5
0.176
4.5
0.176
4.5
0.176
4.5
0.176
4.5
0.078
2.0
0.078
2.0
0.156
4.0
0.156
4.0
0.176
4.5
0.176
4.5
Flow Data
Inline
CV
XT*
0.12 0.52
0.12 0.68
0.14 0.66
0.43 0.77
0.43 0.69
0.45 0.55
0.28 0.67
0.28 0.63
0.29 0.51
0.12 0.52
0.12 0.68
0.14 0.66
0.43 0.85
0.43 0.77
0.45 0.69
0.43 0.85
0.43 0.77
0.45 0.69
0.43 0.85
0.43 0.77
0.45 0.69
0.43 0.85
0.43 0.77
0.45 0.69
0.43 0.85
0.43 0.77
0.45 0.69
0.43 0.85
0.43 0.77
0.45 0.69
0.12 0.52
0.12 0.68
0.14 0.66
0.12 0.52
0.12 0.68
0.14 0.66
0.37 0.78
0.37 0.72
0.39 0.62
0.37 0.78
0.37 0.72
0.39 0.62
0.43 0.85
0.43 0.77
0.45 0.69
0.43 0.85
0.43 0.77
0.45 0.69
* Tested in accordance with ISA S75.02. Gas flow will be choked when P1 - P2 / P1 = xT .
For CPI and A-LOK, dimensions are measured with nuts in the finger tight position.
Dimensions
Angle
CV
XT*
0.15 0.64
0.15 0.59
0.17 0.49
0.55 0.63
0.55 0.63
0.58 0.68
0.36 0.55
0.36 0.51
0.37 0.59
0.15 0.64
0.15 0.59
0.17 0.49
0.55 0.63
0.55 0.63
0.58 0.68
0.55 0.63
0.55 0.63
0.58 0.68
0.55 0.63
0.55 0.63
0.58 0.68
0.55 0.63
0.55 0.63
0.58 0.68
0.55 0.63
0.55 0.63
0.58 0.68
0.55 0.63
0.55 0.63
0.58 0.68
0.15 0.64
0.15 0.59
0.17 0.49
0.15 0.64
0.15 0.59
0.17 0.49
0.48 0.60
0.48 0.58
0.51 0.64
0.48 0.60
0.48 0.58
0.51 0.64
0.55 0.63
0.55 0.63
0.58 0.68
0.55 0.63
0.55 0.63
0.58 0.68
Inch
mm
Inch
mm
1.10
27.9
1.10
27.9
0.81
20.6
0.81
20.6
0.81
20.6
0.81
20.6
1.10
27.9
1.10
27.9
1.15
29.2
1.15
29.2
0.94
23.9
0.94
23.9
0.80
20.3
0.80
20.3
1.15
29.2
1.15
29.2
1.17
29.7
1.17
29.7
1.17
29.7
1.17
29.7
1.10
27.9
1.10
27.9
1.10
27.9
1.10
27.9
1.15
29.2
1.15
29.2
1.15
29.2
1.15
29.2
1.18
30.0
1.18
30.0
1.18
30.0
1.18
30.0
Catalog 4110-NV
1.81 *
(46.0)
V
Max Open 2.58 (65.5)
Min Close 2.25 (57.2)
.44 (11.2)
.44 (11.2)
.53 (13.5)
A
Model Shown:
6M4F-V6LR-V-SS
.53
(13.5)
Model Shown:
4F6Z-V6AK-SS
Basic
Part Number
Inline
Angle
4F-V6LR
4F-V6AR
4F-V6LN
4F-V6AN
4F-V6LK
4F-V6AK
6A-V6LR
6A-V6AR
6A-V6LN
6A-V6AN
6A-V6LK
6A-V6AK
6M-V6LR
6M-V6AR
6M-V6LN
6M-V6AN
6M-V6LK
6M-V6AK
6Z-V6LR
6Z-V6AR
6Z-V6LN
6Z-V6AN
6Z-V6LK
6Z-V6AK
8A-V6LR
8A-V6AR
8A-V6LN
8A-V6AN
8A-V6LK
8A-V6AK
8Z-V6LR
8Z-V6AR
8Z-V6LN
8Z-V6AN
8Z-V6LK
8Z-V6AK
M10A-V6LR M10A-V6AR
M10A-V6LN M10A-V6AN
M10A-V6LK M10A-V6AK
M10Z-V6LR M10Z-V6AR
M10Z-V6LN M10Z-V6AN
M10Z-V6LK M10Z-V6AK
End Connections
Inlet
Outlet
(Port 1)
(Port 2)
1/4" Female NPT
Stem
Type
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Orifice
Inch mm
0.228
5.8
0.228
5.8
0.228
5.8
0.228
5.8
0.228
5.8
0.228
5.8
0.228
5.8
0.228
5.8
Flow Data
Inline
CV
XT*
0.73 0.90
0.55 0.61
0.80 0.87
0.73 0.90
0.55 0.61
0.80 0.87
0.73 0.90
0.55 0.61
0.80 0.87
0.73 0.90
0.55 0.61
0.80 0.87
0.73 0.90
0.55 0.61
0.80 0.87
0.73 0.90
0.55 0.61
0.80 0.87
0.73 0.90
0.55 0.61
0.80 0.87
0.73 0.90
0.55 0.61
0.80 0.87
* Tested in accordance with ISA S75.02. Gas flow will be choked when P1 - P2 / P1 = XT.
For CPI and A-LOK, dimensions are measured with nuts in the finger tight position.
Angle
CV
XT*
1.23 0.50
0.92 0.62
1.23 0.56
1.23 0.50
0.92 0.62
1.23 0.56
1.23 0.50
0.92 0.62
1.23 0.56
1.23 0.50
0.92 0.62
1.23 0.56
1.23 0.50
0.92 0.62
1.23 0.56
1.23 0.50
0.92 0.62
1.23 0.56
1.23 0.50
0.92 0.62
1.23 0.56
1.23 0.50
0.92 0.62
1.23 0.56
Dimensions
A
B
Inch mm Inch mm
0.94
23.9
0.94
23.9
1.29
32.8
1.29
32.8
1.03
26.2
1.03
26.2
1.29
32.8
1.29
32.8
1.40
35.6
1.40
35.6
1.40
35.6
1.40
35.6
1.30
33.0
1.30
33.0
1.30
33.0
1.30
33.0
Catalog 4110-NV
V
Max Open 3.01 (76.5)
Min Close 2.23 (56.6)
.58 (14.7)
Model Shown:
8Z6F-V8LK-SS
.59
(15.0)
Model Shown:
8M-V8AN-EPR-SS
End Connections
Basic
Part Number
Inlet
Outlet
Inline
Angle
(Port 1)
(Port 2)
6F-V8LR
6F-V8AR
6F-V8LN
6F-V8AN
3/8" Female NPT
6F-V8LK
6F-V8AK
8A-V8LR
8A-V8AR
1/2" Compression A-LOK
8A-V8LN
8A-V8AN
8A-V8LK
8A-V8AK
8M-V8LR
8M-V8AR
8M-V8LN
8M-V8AN
1/2" Male NPT
8M-V8LK
8M-V8AK
8Z-V8LR
8Z-V8AR
8Z-V8LN
8Z-V8AN
1/2" Compression CPI
8Z-V8LK
8Z-V8AK
M10A-V8LR M10A-V8AR
M10A-V8LN M10A-V8AN 10mm Compression A-LOK
M10A-V8LK M10A-V8AK
M10Z-V8LR M10Z-V8AR
M10Z-V8LN M10Z-V8AN 10mm Compression CPI
M10Z-V8LK M10Z-V8AK
M12A-V8LR M12A-V8AR
M12A-V8LN M12A-V8AN 12mm Compression A-LOK
M12A-V8LK M12A-V8AK
M12Z-V8LR M12Z-V8AR
M12Z-V8LN M12Z-V8AN 12mm Compression CPI
M12Z-V8LK M12Z-V8AK
Stem
Type
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Orifice
Inch mm
0.312
7.9
0.312
7.9
0.312
7.9
0.312
7.9
0.281
7.1
0.281
7.1
0.281
7.1
0.281
7.1
Flow Data
Inline
CV
XT*
1.23 0.87
1.05 0.83
1.29 0.91
1.23 0.87
1.05 0.83
1.29 0.91
1.23 0.87
1.05 0.83
1.29 0.91
1.23 0.87
1.05 0.83
1.29 0.91
1.13 0.79
0.97 0.78
1.18 0.80
1.13 0.79
0.97 0.78
1.18 0.80
1.13 0.79
0.97 0.78
1.18 0.80
1.13 0.79
0.97 0.78
1.18 0.80
* Tested in accordance with ISA S75.02. Gas flow will be choked when P1 - P2 / P1 = XT.
For CPI and A-LOK, dimensions are measured with nuts in the finger tight position.
Angle
CV
XT*
1.66 0.72
1.28 0.80
1.90 0.76
1.66 0.72
1.28 0.80
1.90 0.76
1.66 0.72
1.28 0.80
1.90 0.76
1.66 0.72
1.28 0.80
1.90 0.76
1.52 0.66
1.18 0.75
1.69 0.66
1.52 0.66
1.18 0.75
1.69 0.66
1.52 0.66
1.18 0.75
1.69 0.66
1.52 0.66
1.18 0.75
1.69 0.66
Dimensions
A
B
Inch mm Inch mm
1.34
34.0
1.34
34.0
1.53
38.9
1.53
38.9
1.34
34.0
1.34
34.0
1.53
38.9
1.53
38.9
1.42
36.1
1.42
36.1
1.42
36.1
1.42
36.1
1.51
38.4
1.51
38.4
1.51
38.4
1.51
38.4
Catalog 4110-NV
2.75 *
(69.9)
.64 (16.3)
.64 (16.3)
.61 (15.5)
A
B
.61
(15.5)
Model Shown:
8M8F-V12AK-BN-SS
End Connections
Basic
Part Number
Inlet
Outlet
Inline
Angle
(Port 1)
(Port 2)
8F-V12LR 8F-V12AR
8F-V12LN 8F-V12AN
1/2" Female NPT
8F-V12LK
8F-V12AK
8W-V12LR 8W-V12AR
8W-V12LN 8W-V12AN
1/2" Tube Socket Weld
8W-V12LK 8W-V12AK
10A-V12LR 10A-V12AR
10A-V12LN 10A-V12AN 5/8" Compression A-LOK
10A-V12LK 10A-V12AK
10Z-V12LR 10Z-V12AR
10Z-V12LN 10Z-V12AN 5/8" Compression CPI
10Z-V12LK 10Z-V12AK
12A-V12LR 12A-V12AR
12A-V12LN 12A-V12AN 3/4" Compression A-LOK
12A-V12LK 12A-V12AK
12Z-V12LR 12Z-V12AR
12Z-V12LN 12Z-V12AN 3/4" Compression CPI
12Z-V12LK 12Z-V12AK
Stem
Type
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Blunt
Needle
PCTFE
Orifice
Inch mm
0.312
7.9
0.312
7.9
0.312
7.9
0.312
7.9
0.312
7.9
0.312
7.9
Flow Data
Inline
CV
XT*
1.23 0.87
1.05 0.83
1.29 0.91
1.23 0.87
1.05 0.83
1.29 0.91
1.23 0.87
1.05 0.83
1.29 0.91
1.23 0.87
1.05 0.83
1.29 0.91
1.23 0.87
1.05 0.83
1.29 0.91
1.23 0.87
1.05 0.83
1.29 0.91
* Tested in accordance with ISA S75.02. Gas flow will be choked when P1 - P2 / P1 = XT.
For CPI and A-LOK, dimensions are measured with nuts in the finger tight position.
Dimensions
Angle
CV
XT*
1.66 0.72
1.28 0.80
1.90 0.76
1.66 0.72
1.28 0.80
1.90 0.76
1.66 0.72
1.28 0.80
1.90 0.76
1.66 0.72
1.28 0.80
1.90 0.76
1.66 0.72
1.28 0.80
1.90 0.76
1.66 0.72
1.28 0.80
1.90 0.76
Inch
mm
Inch
mm
1.38
35.1
1.38
35.1
1.12
28.4
1.12
28.4
1.52
38.6
1.52
38.6
1.52
38.6
1.52
38.6
1.52
38.6
1.52
38.6
1.52
38.6
1.52
38.6
Catalog 4110-NV
How to Order
The correct part number is easily derived from the following example and ordering chart. The six product
characteristics required are coded as shown in the chart.
Example 1, below, describes an angle pattern V4 Series needle valve equipped with 1/4" CPI compression inlet
and outlet ports, a PCTFE tipped stem, Nitrile seals, and stainless steel construction.
Example 2, below, describes an inline pattern V6 Series needle valve equipped with 1/4" male NPT inlet port, 1/4"
female NPT outlet port, a needle stem type, PTFE stem seal, brass construction.
Example 1: 4Z-V4AK-BN-SS (shown in the part number blocks below)
Example 2: 4M4F-V6LN-B
4Z
Inlet
Port*
Inlet
Port*
2A 2M
2F 2Z
2A 4A
2F 4M
2M 4W
2Z 4Z
4A 6A
4F 6M
4M 6W
4Z 6Z
4F 6Z
6A 8A
6F 8M
8F 10A
8W 10Z
Outlet
Port*
Outlet
Port*
4A
4Z
6A
6Z
M3A
M3Z
8A
8Z
M8A
M8Z
8Z
M10A
M10Z
12A
12Z
M6A
M6Z
M8A
M8Z
M10A
M10Z
M12A
M12Z
M12A
M12Z
V4
AK
Valve
Series
Stem
Type
Valve
Series
V2
V4
V6
BN
Stem
Seal
SS
Body
Material
Stem
Stem
Type
Seal
R Blunt (30)
Blank PTFE
N Needle (2-1/2) BN
Nitrile Rubber
K PCTFE
EPR Ethylene
Propylene
Rubber
V
Fluorocarbon
Rubber
Body
Material
SS Stainless Steel
S Steel
M Monel Alloy 400
B Brass
V8
V12
*If the inlet and outlet ports are the same, eliminate the outlet port designator.
Catalog 4110-NV
Stainless Steel T-Bar Handles with Handle Screw Examples: V2: V2-BAR-HANDLE-SS;
V4: V4-BAR-HANDLE-SS; V6: V6-BAR-HANDLE-SS; V8: U12-BAR-HANDLE-SS; V12: U12-BAR-HANDLE-SS
Aluminum T-Bar Handles with Handle Screw Examples: V2: Not available; V4: V4-BAR-HANDLE-AL;
V6: V4-BAR-HANDLE-AL; V8: U12-BAR-HANDLE-AL; V12: U12-BAR-HANDLE-AL
Panel Mounting Nuts Examples: V2: 2-Panel-Nut-SS; V4: 4-Panel-Nut-SS; V6: 6-Panel-Nut-SS;
V8: 8-Panel-Nut-SS
10
Notes
Catalog 4110-NV
11
Catalog 4110-NV
Introduction
Parker U Series Union Bonnet Valves have been engineered for use at pressures up to 6,000 (414 bar) and
temperatures as high as 1,200F (649C). A non-rotating lower stem helps to extend packing life by removing
rotation from the packing area. Stem packing below the threads isolates the thread lubricant from the flow,
ensuring adequate lubrication regardless of the media.
Features
Specifications
Union bonnet design ensures high integrity seal under
severe service applications
Packing below the power threads protects thread
lubricants from media and isolates the lubricants from
the media
Dust seal in the packing nut protects stem threads
from external contamination
Stem swivel above the packing eliminates entrapment
area and increases packing life
Choice of Grafoil or PTFE packing
Choice of Regulating or Blunt stem types. Blunt stem
type helps combat wire draw which may occur when
two phase flow is present (i.e. steam service)
316 stainless steel construction
Wide variety of US Customary and SI ports
Panel mountable
100% factory tested
Pressure Rating:
6000 psig (414 bar) CWP
Materials of Construction
Item #
*1
2
*3
*4
5
6
7
*8
9
*10
*11
12
13
14
15
Description
Body
Bonnet Nut
Bonnet
Lower Stem*
Upper Stem
Stem Guide
Ball
Bonnet Seal**
Packing Nut
Packing***
Packing Washer
Handle****
Handle Screw
Dust Seal*****
Locking Nut
Temperature Rating:
PTFE packing:
-65F to 450F (-54C to 232C)
Grafoil packing:
-65F to 700F (-54C to 371C)
Grafoil packing with HT option:
-65F to 1200F (-54C to 649C)
Orifice: .177" to .437" (4.5mm to 11.1mm)
CV: .53 to 3.55
Pressure Rating and Tubing Selection:
For working pressures of A-LOK and CPI tube
connections, please see the Instrument Tubing
Selection Guide (Bulletin 4200-TS), found in the
Technical Section of the Parker Instrumentation
Products Master Binder, or the Parker Instrument
Tube Fitting Installation Manual (Bulletin 4200-B4).
For working pressures of valves with external or
internal pipe threads, please see Catalog 4260,
Instrumentation Pipe Fittings.
Material
ASTM A 182, Type F316
ASTM A 479, Type 316
ASTM A 479, Type 316
ASTM A 564, Type 630
ASTM A 564, Type 630
ASTM A 581, Type 416
440-C Stainless Steel
Nickel-Chromium-Iron Alloy
ASTM A 479, Type 316
Grafoil
316 Stainless Steel
Aluminum
316 Stainless Steel
Nylon 6/6
Stainless Steel
* Wetted parts
* Lower Stem material is ASTM A 276 Type 316 with HT option
** Not required on U6 and U12 Series which have metal-to-metal seals
*** Optional PTFE Packing is available
**** Handle material is stainless steel with HT option
***** Dust Seal not available with HT option
Lubrication: Molybdenum disulfide with soft metallic fillers
12
Catalog 4110-NV
Flow Characteristics
2.00
(50.8)
2.00
(50.8)
Panel Hole Diameter:
0.65 (16.5)
Max Panel Thickness:
0.42 (10.7)
Model Shown:
4Z-U6LB-T-SS
Model Shown:
4F-U6AR-T-SS
1.34 (34.0)
1.34 (34.0)
.59 (15.0)
A
( ) Denotes dimensions
in millimeters
.59
(15.0)
Basic
Part Number
Inline
Angle
2F-U6LR
2F-U6AR
2F-U6LB
2F-U6AB
4A-U6LR
4A-U6AR
4A-U6LB
4A-U6AB
4F-U6LR
4F-U6AR
4F-U6LB
4F-U6AB
4M-U6LR
4M-U6AR
4M-U6LB
4M-U6AB
4W-U6LR
4W-U6AR
4W-U6LB
4W-U6AB
4Z-U6LR
4Z-U6AR
4Z-U6LB
4Z-U6AB
M6A-U6LR
M6A-U6AR
M6A-U6LB
M6A-U6AB
M6Z-U6LR
M6Z-U6AR
M6Z-U6LB
M6Z-U6AB
M8A-U6LR
M8A-U6AR
M8A-U6LB
M8A-U6AB
M8Z-U6LR
M8Z-U6AR
M8Z-U6LB
M8Z-U6AB
End Connections
Inlet
Outlet
(Port 1)
(Port 2)
1/8" Female NPT
1/4" Compression A-LOK
1/4" Female NPT
1/4" Male NPT
1/4" Socket Weld
1/4" Compression CPI
6mm Compression A-LOK
6mm Compression CPI
8mm Compression A-LOK
8mm Compression CPI
Stem
Type
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Orifice
Inch mm
0.188
4.8
0.177
4.5
0.228
5.8
0.177
4.5
0.177
4.5
0.177
4.5
0.177
4.5
0.177
4.5
0.177
4.5
0.177
4.5
Flow Data
Inline
CV
XT*
0.58 0.83
0.69 0.50
0.53 0.80
0.65 0.48
0.78 0.95
0.82 0.59
0.53 0.80
0.65 0.48
0.53 0.80
0.65 0.48
0.53 0.80
0.65 0.48
0.53 0.80
0.65 0.48
0.53 0.80
0.65 0.48
0.53 0.80
0.65 0.48
0.53 0.80
0.65 0.48
* Tested in accordance with ISA S75.02. Gas flow will be choked when P1 - P2 / P1 = XT.
For CPI and A-LOK, dimensions are measured with nuts in the finger tight position.
13
Dimensions
Angle
CV
XT*
0.77 0.70
0.91 0.42
0.70 0.67
0.86 0.40
1.04 0.80
1.09 0.50
0.70 0.67
0.86 0.40
0.70 0.67
0.86 0.40
0.70 0.67
0.86 0.40
0.70 0.67
0.86 0.40
0.70 0.67
0.86 0.40
0.70 0.67
0.86 0.40
0.70 0.67
0.86 0.40
Inch
mm
Inch
mm
1.00
25.4
1.00
25.4
1.38
35.1
1.38
35.1
1.03
26.2
1.03
26.2
1.09
27.7
1.09
27.7
.91
23.1
.91
23.1
1.38
35.1
1.38
35.1
1.38
35.1
1.38
35.1
1.38
35.1
1.38
35.1
1.38
35.1
1.38
35.1
1.38
35.1
1.38
35.1
Catalog 4110-NV
2.75
(69.9)
Panel Hole Diameter:
0.83 (21.1)
Max Panel Thickness:
0.61 (15.5)
Model Shown:
6F-U12LB-G-SS-HT
1.50 (38.1)
Model Shown:
8A-U12AB-T-SS
1.50 (38.1)
.61 (15.5)
A
B
.61
(15.5)
End Connections
Basic
Part Number
Inlet
Outlet
Inline
Angle
(Port 1)
(Port 2)
4A-U12LR
4A-U12AR
1/4" Compression A-LOK
4A-U12LB
4A-U12AB
4F-U12LR
4F-U12AR
1/4" Female NPT
4F-U12LB
4F-U12AB
4Z-U12LR
4Z-U12AR
1/4" Compression CPI
4Z-U12LB
4Z-U12AB
6A-U12LR
6A-U12AR
3/8" Compression A-LOK
6A-U12LB
6A-U12AB
6F-U12LR
6F-U12AR
3/8" Female NPT
6F-U12LB
6F-U12AB
6W-U12LR
6W-U12AR
3/8" Tube Socket Weld
6W-U12LB
6W-U12AB
6Z-U12LR
6Z-U12AR
3/8" Compression CPI
6Z-U12LB
6Z-U12AB
8A-U12LR
8A-U12AR
1/2" Compression A-LOK
8A-U12LB
8A-U12AB
8F-U12LR
8F-U12AR
1/2" Female NPT
8F-U12LB
8F-U12AB
8W-U12LR
8W-U12AR
1/2" Tube Socket Weld
8W-U12LB
8W-U12AB
8Z-U12LR
8Z-U12AR
1/2" Compression CPI
8Z-U12LB
8Z-U12AB
M10A-U12LR M10A-U12AR
10mm Compression A-LOK
M10A-U12LB M10A-U12AB
M10Z-U12LR M10Z-U12AR
10mm Compression CPI
M10Z-U12LB M10Z-U12AB
M12A-U12LR M12A-U12AR
12mm Compression A-LOK
M12A-U12LB M12A-U12AB
M12Z-U12LR M12Z-U12AR
12mm Compression CPI
M12Z-U12LB M12Z-U12AB
M14A-U12LR M14A-U12AR
14mm Compression A-LOK
M14A-U12LB M14A-U12AB
M14Z-U12LR M14Z-U12AR
14mm Compression CPI
M14Z-U12LB M14Z-U12AB
Stem
Type
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Regulating
Blunt
Orifice
Inch mm
0.125
3.2
0.250
6.4
0.125
3.2
0.187
4.7
0.312
7.9
0.228
5.8
0.187
4.7
0.250
6.4
0.312
7.9
0.312
7.9
0.250
6.4
0.250
6.4
0.250
6.4
0.312
7.9
0.312
7.9
0.312
7.9
0.312
7.9
* Tested in accordance with ISA S75.02. Gas flow will be choked when P1 - P2 / P1 = XT.
For CPI and A-LOK, dimensions are measured with nuts in the finger tight position.
14
Flow Data
Inline
CV XT*
0.44 0.57
0.51 0.40
0.94 0.65
1.03 0.60
0.44 0.57
0.51 0.40
0.69 0.61
0.77 0.50
1.19 0.78
1.31 0.80
0.85 0.64
0.94 0.57
0.69 0.61
0.77 0.50
0.94 0.65
1.03 0.60
1.19 0.78
1.31 0.80
1.19 0.78
1.31 0.80
0.94 0.65
1.03 0.60
0.94 0.65
1.03 0.60
0.94 0.65
1.03 0.60
1.19 0.78
1.31 0.80
1.19 0.78
1.31 0.80
1.19 0.78
1.31 0.80
1.19 0.78
1.31 0.80
Angle
CV XT*
0.60 0.49
0.68 0.33
1.25 0.55
1.37 0.51
0.60 0.49
0.68 0.33
0.92 0.52
1.02 0.42
1.58 0.66
1.74 0.68
1.13 0.54
1.25 0.48
0.92 0.52
1.02 0.42
1.25 0.55
1.37 0.51
1.58 0.66
1.74 0.68
1.58 0.66
1.74 0.68
1.25 0.55
1.37 0.51
1.25 0.55
1.37 0.51
1.25 0.55
1.37 0.51
1.58 0.66
1.74 0.68
1.58 0.66
1.74 0.68
1.58 0.66
1.74 0.68
1.58 0.66
1.74 0.68
Dimensions
A
B
Inch mm Inch mm
1.39 35.3 1.39 35.3
1.13 28.7 1.13 28.7
1.39 35.3 1.39 35.3
1.60 40.6 1.60 40.6
1.30 33.0 1.30 33.0
1.13 28.7 1.13 28.7
1.60 40.6 1.60 40.6
1.49 37.8 1.49 37.8
1.50 38.1 1.50 38.1
1.25 31.8 1.25 31.8
1.49 37.8 1.49 37.8
1.53 38.9 1.53 38.9
1.53 38.9 1.53 38.9
1.70 43.2 1.70 43.2
1.70 43.2 1.70 43.2
1.70 43.2 1.70 43.2
1.70 43.2 1.70 43.2
Catalog 4110-NV
3.50
(88.9)
3.50
(88.9)
Model Shown:
16M-U16LR-G-SS
Model Shown:
16M16F-U16AB-T-SS
1.86 (47.2)
( ) Denotes dimensions
in millimeters
.85 (21.6)
A
1.86 (47.2)
B
.85
(21.6)
Basic
End Connections
Inlet
Outlet
Stem
Part Number
Orifice
Inline
Angle
(Port 1)
(Port 2)
Type
Inch mm
8A-U16LR
8A-U16AR
Regulating
1/2" Compression A-LOK
0.394 10.0
8A-U16LB
8A-U16AB
Blunt
8F-U16LR
8F-U16AR
Regulating
1/2" Female NPT
0.437 11.1
8F-U16LB
8F-U16AB
Blunt
8M-U16LR
8M-U16AR
Regulating
1/2" Male NPT
0.437 11.1
8M-U16LB
8M-U16AB
Blunt
8PSW-U16LR
8PSW-U16AR
Regulating
1/2" Pipe Socket Weld
0.437 11.1
8PSW-U16LB
8PSW-U16AB
Blunt
8W-U16LR
8W-U16AR
Regulating
1/2" Tube Socket Weld
0.394 10.0
8W-U16LB
8W-U16AB
Blunt
8Z-U16LR
8Z-U16AR
Regulating
1/2" Compression CPI
0.394 10.0
8Z-U16LB
8Z-U16AB
Blunt
12A-U16LR
12A-U16AR
Regulating
3/4" Compression A-LOK
0.437 11.1
12A-U16LB
12A-U16AB
Blunt
12F-U16LR
12F-U16AR
Regulating
3/4" Female NPT
0.437 11.1
12F-U16LB
12F-U16AB
Blunt
12M-U16LR
12M-U16AR
Regulating
3/4" Male NPT
0.437 11.1
12M-U16LB
12M-U16AB
Blunt
12PSW-U16LR 12PSW-U16AR
Regulating
3/4" Pipe Socket Weld
0.437 11.1
12PSW-U16LB
12PSW-U16AB
Blunt
12W-U16LR
12W-U16AR
Regulating
3/4" Tube Socket Weld
0.437 11.1
12W-U16LB
12W-U16AB
Blunt
12Z-U16LR
12Z-U16AR
Regulating
3/4" Compression CPI
0.437 11.1
12Z-U16LB
12Z-U16AB
Blunt
16A-U16LR
16A-U16AR
Regulating
1" Compression A-LOK
0.437 11.1
16A-U16LB
16A-U16AB
Blunt
16F-U16LR
16F-U16AR
Regulating
1" Female NPT
0.437 11.1
16F-U16LB
16F-U16AB
Blunt
16M-U16LR
16M-U16AR
Regulating
1" Male NPT
0.437 11.1
16M-U16LB
16M-U16AB
Blunt
16Z-U16LR
16Z-U16AR
Regulating
1" Compression CPI
0.437 11.1
16Z-U16LB
16Z-U16AB
Blunt
M12A-U16LR
M12A-U16AR
Regulating
12mm Compression A-LOK
0.394 10.0
M12A-U16LB
M12A-U16AB
Blunt
M12Z-U16LR
M12Z-U16AR
Regulating
12mm Compression CPI
0.394 10.0
M12Z-U16LB
M12Z-U16AB
Blunt
M20A-U16LR
M20A-U16AR
Regulating
20mm Compression A-LOK
0.437 11.1
M20A-U16LB
M20A-U16AB
Blunt
M20Z-U16LR
M20Z-U16AR
Regulating
20mm Compression CPI
0.437 11.1
M20Z-U16LB
M20Z-U16AB
Blunt
M25A-U16LR
M25A-U16AR
Regulating
25mm Compression A-LOK
0.437 11.1
M25A-U16LB
M25A-U16AB
Blunt
M25Z-U16LR
M25Z-U16AR
Regulating
25mm Compression CPI
0.437 11.1
M25Z-U16LB
M25Z-U16AB
Blunt
* Tested in accordance with ISA S75.02. Gas flow will be choked when P1 - P2 / P1 = XT.
For CPI and A-LOK, dimensions are measured with nuts in the finger tight position.
15
Flow Data
Inline
CV
XT*
1.59 0.73
1.90 0.95
1.82 0.72
2.67 0.80
1.82 0.72
2.67 0.80
1.82 0.72
2.67 0.80
1.59 0.73
1.90 0.95
1.59 0.73
1.90 0.95
1.82 0.72
2.67 0.80
1.82 0.72
2.67 0.80
1.82 0.72
2.67 0.80
1.82 0.72
2.67 0.80
1.82 0.72
2.67 0.80
1.82 0.72
2.67 0.80
1.82 0.72
2.67 0.80
1.82 0.72
2.67 0.80
1.82 0.72
2.67 0.80
1.82 0.72
2.67 0.80
1.59 0.73
1.90 0.95
1.59 0.73
1.90 0.95
1.82 0.72
2.67 0.80
1.82 0.72
2.67 0.80
1.82 0.72
2.67 0.80
1.82 0.72
2.67 0.80
Angle
CV
XT*
2.11 0.62
2.53 0.81
2.42 0.61
3.55 0.68
2.42 0.61
3.55 0.68
2.42 0.61
3.55 0.68
2.11 0.62
2.53 0.81
2.11 0.62
2.53 0.81
2.42 0.61
3.55 0.68
2.42 0.61
3.55 0.68
2.42 0.61
3.55 0.68
2.42 0.61
3.55 0.68
2.42 0.61
3.55 0.68
2.42 0.61
3.55 0.68
2.42 0.61
3.55 0.68
2.42 0.61
3.55 0.68
2.42 0.61
3.55 0.68
2.42 0.61
3.55 0.68
2.11 0.62
2.53 0.81
2.11 0.62
2.53 0.81
2.42 0.61
3.55 0.68
2.42 0.61
3.55 0.68
2.42 0.61
3.55 0.68
2.42 0.61
3.55 0.68
Dimensions
A
B
Inch mm Inch mm
1.97
50.0
1.97
50.0
1.56
39.6
1.56
39.6
1.92
48.8
1.92
48.8
1.56
39.6
1.56
39.6
1.69
42.9
1.69
42.9
1.97
50.0
1.97
50.0
1.97
50.0
1.97
50.0
1.63
41.4
1.63
41.4
1.63
41.4
1.63
41.4
1.56
39.6
1.56
39.6
1.56
39.6
1.56
39.6
1.97
50.0
1.97
50.0
1.97
50.0
1.97
50.0
1.81
46.0
1.81
46.0
1.81
46.0
1.81
46.0
1.97
50.0
1.97
50.0
1.97
50.0
1.97
50.0
1.97
50.0
1.97
50.0
1.97
50.0
1.97
50.0
1.97
50.0
1.97
50.0
1.97
50.0
1.97
50.0
1.97
50.0
1.97
50.0
Catalog 4110-NV
How to Order
The correct part number is easily derived from the following example and ordering chart. The six product
characteristics required are coded as shown in the chart.
The example below describes an angle pattern U6 Series needle valve equipped with 1/4" CPI compression
inlet and outlet ports, a regulating stem type, Grafoil packing, stainless steel construction.
Example 1: 4Z-U6AR-G-SS
4Z
Inlet
Port*
Inlet
Port*
4F
4M
6W
6Z
8A
8F
2F
4A
4A
4F
4Z
6A
6F
8A
8F
8M
8PSW
8W
8Z
12F
12M
Outlet
Port*
U6A
Valve
Series
Stem
Type
Outlet
Port*
M6A M8
M6Z M8Z
12A M12A
12Z M12Z
M10A M14A
M10Z M14Z
Valve
Series
U6A
U6L
U12A
U12L
U16A
U16L
4W
4Z
8W
8Z
10A
10Z
SS
Packing
Body
Material
Stem
Type
Packing
B Blunt
T PTFE
R Regulating G Grafoil
Body
Material
SS Stainless
Steel
*If the inlet and outlet ports are the same, eliminate the outlet port designator.
16
Notes
Catalog 4110-NV
17
Catalog 4110-NV
Introduction
Parker VQ Series Toggle Valves are the right combination of performance and value for manual or pneumatic
on-off control in moderate pressure and temperature applications. The manual version employs a toggle handle
for quick action at pressures up to 300 psig (21 bar). Compact double acting, normally closed, and normally open
pneumatically actuated versions of this valve are ideal for automatic control at pressures up to 600 psig (41 bar).
VQ
Quick acting
Inline and angle patterns
Available with CPI, A-LOK, male and female NPT
end connections
Panel mountable
Color-coded handles
316 stainless steel and brass body construction
Stem seal materials
Fluorocarbon Rubber
Nitrile Rubber
Ethylene Propylene Rubber
Highly Fluorinated Fluorocarbon Rubber
Optional handle positioners and anti-lock handles
100% factory tested
Model Shown:
4A-V4LQ-BP
Temperature Ratings:
PTFE Stem Tip: -20F to 200F (-29C to 93C)
PCTFE Stem Tip: -65F to 200F (-54C to 93C)
Materials of Construction
Manual Toggle Valve
7
8
Item #
10
3
4
2
3
5
6
7
8
9
10
Description
Stainless Steel
Brass
ASTM A 182
ASTM B 283
Body
Type F316
Alloy C37700
ASTM A 479
ASTM B 453
Cap
Type 316
Alloy C34000
Spring
Stainless Steel
Stainless Steel
Fluorocarbon
Fluorocarbon
Stem Seal*
Rubber
Rubber
ASTM A 276
ASTM A 276
Stem
Type 316
Type 316
Stem Washer
Stainless Steel
Stainless Steel
Handle
Nylon 6/6
Nylon 6/6
Handle Pin
Stainless Steel
Stainless Steel
Handle Washer
Acetal
Acetal
Panel Nut
316 Stainless Steel 316 Stainless Steel
Catalog 4110-NV
VQ
Model Shown:
M6A-V4LQ-BN-11AC-SS
Materials of Construction
Actuated Valve
Temperature Ratings:
PTFE Stem Tip: -20F to 200F (-29C to 93C)
PCTFE Stem Tip: -65F to 200F (-54C to 93C)
Item
#
1
10
11
3
13
12
14
12
6
7
8
9
10
11
9
4
6
15
7
2
12
13
14
15
Description
Stainless Steel
Brass
ASTM A 182
ASTM B 283
Body
Type F316
Alloy C37700
ASTM A 479
ASTM B 453
Cap
Type 316
Alloy C34000
Spring*
Stainless Steel
Stainless Steel
Fluorocarbon
Fluorocarbon
Stem Seal**
Rubber
Rubber
ASTM A 276
ASTM A 276
Stem
Type 316
Type 316
Stem Washer
Stainless Steel
Stainless Steel
Lock Nut
316 Stainless Steel 316 Stainless Steel
Mounting Bracket
Aluminum
Aluminum
Actuator Base
Aluminum
Aluminum
Actuator Cap
Aluminum
Aluminum
Piston
Aluminum
Aluminum
Fluorocarbon
Fluorocarbon
Actuator Seals
Rubber
Rubber
Screws
Stainless Steel
Stainless Steel
Actuator Bushing
Aluminum
Aluminum
ASTM A 479
ASTM A 479
Stem Bushing***
Type 316
Type 316
Model Shown:
4M-V4LQ-11AO-SS
19
Catalog 4110-NV
E: Open
F: Closed
E: Opened
F: Closed
VQ
C
A
Flow Data
Orifice
Inlet
Outlet
CV
(Port 1) (Port 2) Inch mm
0.14
1/8" Compression
0.078 2.0
A-LOK
0.15
0.36
1/8" Female NPT 0.176 4.5
0.49
0.30
1/8" Male NPT 0.125 3.2
0.35
0.14
1/8" Compression
0.078 2.0
CPI
0.15
0.36
1/4" Compression
0.176 4.5
A-LOK
0.49
0.36
1/4" Male NPT 0.176 4.5
0.49
0.36
1/4" Compression
0.176 4.5
CPI
0.49
0.36
3/8" Compression
0.176 4.5
A-LOK
0.49
0.36
3/8" Compression
0.176 4.5
CPI
0.49
0.36
6mm Compres0.176 4.5
sion A-LOK
0.49
0.36
6mm Compres0.176 4.5
sion CPI
0.49
0.36
8mm Compres0.176 4.5
sion A-LOK
0.49
0.36
8mm Compres0.176 4.5
sion CPI
0.49
End Connections
XT*
0.52
0.50
0.71
0.64
0.50
0.55
0.52
0.50
0.71
0.64
0.71
0.64
0.71
0.64
0.71
0.64
0.71
0.64
0.71
0.64
0.71
0.64
0.71
0.64
0.71
0.64
Dimensions
D
E
mm Inch mm Inch mm
Inch
mm
Inch
mm
Inch
1.10
27.9
1.10
27.9
0.41 10.4
0.93
23.6
2.88
0.81
20.6
0.81
20.6
0.41 10.4
0.93
23.6
0.81
20.6
0.81
20.6
0.41 10.4
0.93
1.10
27.9
1.10
27.9
0.41 10.4
1.15
29.2
1.15
29.2
0.94
23.9
0.94
1.15
29.2
1.17
Inch
mm
Inch
mm
73.2
1.84
46.7
1.25
31.8
2.88
73.2
1.84
46.7
1.25
31.8
23.6
2.88
73.2
1.84
46.7
1.25
31.8
0.93
23.6
2.88
73.2
1.84
46.7
1.25
31.8
0.41 10.4
0.93
23.6
2.88
73.2
1.84
46.7
1.25
31.8
23.9
0.41 10.4
0.93
23.6
2.88
73.2
1.84
46.7
1.25
31.8
1.15
29.2
0.41 10.4
0.93
23.6
2.88
73.2
1.84
46.7
1.25
31.8
29.7
1.17
29.7
0.41 10.4
0.93
23.6
2.88
73.2
1.84
46.7
1.25
31.8
1.17
29.7
1.17
29.7
0.41 10.4
0.93
23.6
2.88
73.2
1.84
46.7
1.25
31.8
1.13
28.7
1.13
28.7
0.41 10.4
0.93
23.6
2.88
73.2
1.84
46.7
1.25
31.8
1.13
28.7
1.13
28.7
0.41 10.4
0.93
23.6
2.88
73.2
1.84
46.7
1.25
31.8
1.13
28.7
1.13
28.7
0.41 10.4
0.93
23.6
2.88
73.2
1.84
46.7
1.25
31.8
1.13
28.7
1.13
28.7
0.41 10.4
0.93
23.6
2.88
73.2
1.84
46.7
1.25
31.8
* Tested in accordance with ISA S75.02. Gas flow will be choked when P1 - P2 / P1 = XT.
For CPI and A-LOK, dimensions are measured with nuts in the finger tight position.
20
Catalog 4110-NV
End Connections
Inlet
(Port 1)
Outlet
(Port 2)
Flow Data
Orifice
CV
Inch mm
4F-V6LQ
1/4" Female NPT 0.250
4F-V6AQ
6A-V6LQ
3/8" Compression
0.250
A-LOK
6A-V6AQ
6Z-V6LQ
3/8" Compression
0.250
CPI
6Z-V6AQ
8A-V6LQ
1/2" Compression
0.250
A-LOK
8A-V6AQ
8Z-V6LQ
1/2" Compression
0.250
CPI
8Z-V6AQ
M10A-V6LQ 10mm Compression
0.250
A-LOK
M10A-V6AQ
M10Z-V6LQ 10mm Compression
0.250
CPI
M10Z-V6AQ
6.4
6.4
6.4
6.4
6.4
6.4
6.4
0.83
0.92
0.83
0.92
0.83
0.92
0.83
0.92
0.83
0.92
0.83
0.92
0.83
0.92
XT*
0.70
0.68
0.70
0.68
0.70
0.68
0.70
0.68
0.70
0.68
0.70
0.68
0.70
0.68
Dimensions
A
B
C
D
E
F
G
Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm
1.00 25.4 1.00 25.4 0.53 13.5 1.07 27.2 3.45 87.6 2.13 54.1 1.60 40.6
1.29 32.8 1.29 32.8 0.53 13.5 1.07 27.2 3.45 87.6 2.13 54.1 1.60 40.6
1.29 32.8 1.29 32.8 0.53 13.5 1.07 27.2 3.45 87.6 2.13 54.1 1.60 40.6
1.37 34.8 1.37 34.8 0.53 13.5 1.07 27.2 3.45 87.6 2.13 54.1 1.60 40.6
1.37 34.8 1.37 34.8 0.53 13.5 1.07 27.2 3.45 87.6 2.13 54.1 1.60 40.6
1.30 33.0 1.30 33.0 0.53 13.5 1.07 27.2 3.45 87.6 2.13 54.1 1.60 40.6
1.30 33.0 1.30 33.0 0.53 13.5 1.07 27.2 3.45 87.6 2.13 54.1 1.60 40.6
Dimensions in inches/millimeters are
for reference only, subject to change.
* Tested in accordance with ISA S75.02. Gas flow will be choked when P1 - P2 / P1 = XT.
For CPI and A-LOK, dimensions are measured with nuts in the finger tight position.
1/8" Female
NPT
1/8" Female
NPT
1/8" Female
NPT
1/8" Female
NPT
VQ4 11AC:
2.16 (54.9)
VQ4 11AO/AD:
2.35 (59.7)
VQ6 11AC:
2.45 (62.2)
VQ6 11AO/AD:
2.64 (67.1)
21
Model Shown:
4F-V6AQ-11AO-B
VQ
Catalog 4110-NV
1.60
.16
VQ
2.02
.28
.47 .63
.41
.59 .62
.41
.63
.20
.62
1.10
.20
1.37
The correct part number is easily derived from the following example and ordering chart. The six product
characteristics required are coded as shown in the chart.
The example below describes a VQ4 Series inline pattern toggle valve equipped with 1/4" CPI compression inlet
and outlet ports, PCTFE stem tip, Nitrile rubber stem seal, and stainless steel construction with panel mounting
nut.
Example 1: 4Z-V4LQK-BN-SSP
4Z
Inlet
Port*
Outlet
Port*
Inlet
Outlet
Port*
Port*
2A 4A 6A M6A
2F
4M 6Z M6Z
2M 4Z
M8A
2Z
M8Z
4F
6A 8A M10A
6Z
8Z M10Z
V4LQ
Valve
Series
Stem
Tip
Valve
Series
V4LQ
V4AQ
Stem
Tip
Blank PTFE
K
PCTFE
V6LQ
V6AQ
BN
Stem
Seal
SSP
Body
Material
Stem
Seal
Blank Fluorocarbon
Rubber
BN
Nitrile Rubber
EPR Ethylene Propylene
Rubber
KZ
Highly Fluorinated
Fluorocarbon
Rubber
Body
Material
SSP Stainless
Steel with
Panel Nut
BP Brass with
Panel Nut
*If the inlet and outlet ports are the same, eliminate the outlet port designator.
22
Catalog 4110-NV
The correct part number is easily derived from the following example and ordering chart. The seven product
characteristics required are coded as shown in the chart.
The example below describes a VQ4 Series pneumatically actuated (normally closed) angle pattern valve
equipped with a 1/4" Male NPT inlet port, a 1/4" A-LOK compression outlet port, PTFE stem tip, fluorocarbon
rubber stem seal, brass construction with mounting bracket.
Example 1: 4M4A-V4AQ-11AC-B
4M
4A
Inlet
Port*
Outlet
Port*
Inlet
Port*
2A 4A
6A
2F 4M 6Z
2M 4Z
2Z
4F 6A
8A
6Z
8Z
Outlet
Port*
M6A
M6Z
M8A
M8Z
M10A
M10Z
V4AQ
Valve
Series
Valve
Series
V4LQ
V4AQ
V6LQ
V6AQ
11AC
Stem
Tip
Stem
Seal
Stem
Tip
Stem
Seal
Actuator
Type
Actuator
Type
Body
Material
Body
Material
*If the inlet and outlet ports are the same, eliminate the outlet port designator.
23
VQ
Catalog 4110-NV
Introduction
Parker NP6 Needle Valves are designed with packing below the stem threads and a two-piece stem. The packing
below the threads protects the flow stream from thread lubricant contamination or washout and also protects the
stem threads from potential damaging effects of the media. The two-piece stem produces a non-rotating lower
stem for superior, repeatable sealing and reduced packing wear.
NP6
Features
Specifications
Packing below power threads protects thread lubricants from
media and isolates the media from the lubricant for severe service
applications
O-ring dust seal in bonnet protects stem threads from external
contamination
Choice of two non-rotating stem types:
R-Stem All metal, blunt stem tip
K-Stem PCTFE stem tip
Non rotating lower stem extends packing and valve life
316 stainless steel construction
Inline and angle patterns
Wide variety of US Customary and SI ports
Panel mountable
100% factory tested
Optional color coded handles
Pressure Rating:
6000 psig (414 bar) CWP
Temperature Rating:
PTFE Packing:
-65F to 450F (-54C to 232C)
PCTFE:
-65F to 350F (-54C to 177C)
Nitrile Rubber:
-30F to 250F (-34C to 121C)
Ethylene Propylene Rubber:
-70F to 275F (-57C to 135C)
Fluorocarbon Rubber:
-15F to 400F (-26C to 204C)
Grafoil:
-70F to 700F (-57C to 371C)
Materials of Construction
Item #
Description
Body
Packing Nut
3
3
Lower Stem
(R-Stem)
Lower Stem
(K-Stem)
Upper Stem
Packing Gland
6
7
Packing*
Packing Washer
Handle**
9
10
Handle Screw
Packing Nut Screw
11
Dust Seal
12
Panel Nut
Material
ASTM A 182
Type F316
ASTM A 479
Type 316
ASTM A 276
Type 316
ASTM A 276
Type 316, with PCTFE
ASTM A 276
Type 316
ASTM A 276
Type 316
PTFE
Stainless Steel
Nylon 6/6,
with SS Insert
Stainless Steel
Stainless Steel
Fluorocarbon
Rubber
316 Stainless Steel
9
11
10
12
5
6
* Optional elastomeric stem seals and Grafoil packing are available See How to Order.
** Handles for Grafoil packed valves are aluminum T-bars.
Lubrication: Perfluorinated polyether
Grafoil is a registered trademark of GrafTech International Holdings, Inc.
24
Catalog 4110-NV
2.00
(50.8)
.43 (10.9)
NP6
A
.43 (10.9)
.53 (13.5)
53
(13.5)
Angle
4A-NP6LR
4A-NP6LK
4F-NP6LR
4F-NP6LK
4M-NP6LR
4M-NP6LK
4Z-NP6LR
4Z-NP6LK
6A-NP6LR
6A-NP6LK
6Z-NP6LR
6Z-NP6LK
M6A-NP6LR
M6A-NP6LK
M6Z-NP6LR
M6Z-NP6LK
M8A-NP6LR
M8A-NP6LK
M8Z-NP6LR
M8Z-NP6LK
4A-NP6AR
4A-NP6AK
4F-NP6AR
4F-NP6AK
4M-NP6AR
4M-NP6AK
4Z-NP6AR
4Z-NP6AK
6A-NP6AR
6A-NP6AK
6Z-NP6AR
6Z-NP6AK
M6A-NP6AR
M6A-NP6AK
M6Z-NP6AR
M6Z-NP6AK
M8A-NP6AR
M8A-NP6AK
M8Z-NP6AR
M8Z-NP6AK
End Connections
Inlet
(Port 1)
Outlet
(Port 2)
1/4" Compression
A-LOK
1/4" Female NPT
1/4" Male NPT
1/4" Compression
CPI
3/8" Compression
A-LOK
3/8" Compression
CPI
6mm Compression
A-LOK
6mm Compression
CPI
8mm Compression
A-LOK
8mm Compression
CPI
Stem
Type
Blunt
PCTFE
Blunt
PCTFE
Blunt
PCTFE
Blunt
PCTFE
Blunt
PCTFE
Blunt
PCTFE
Blunt
PCTFE
Blunt
PCTFE
Blunt
PCTFE
Blunt
PCTFE
Orifice
Inch
mm
0.177
4.5
0.177
4.5
0.177
4.5
0.177
4.5
0.177
4.5
0.177
4.5
0.177
4.5
0.177
4.5
0.177
4.5
0.177
4.5
Flow Data
Inline
CV
XT*
0.60
0.51
0.60
0.51
0.60
0.51
0.60
0.51
0.60
0.51
0.60
0.51
0.60
0.51
0.60
0.51
0.60
0.51
0.60
0.51
* Tested in accordance with ISA S75.02. Gas flow will be choked when P1 - P2 / P1 = XT.
For CPI and A-LOK, dimensions are measured with nuts in the finger tight position.
25
0.50
0.55
0.50
0.55
0.50
0.55
0.50
0.55
0.50
0.55
0.50
0.55
0.50
0.55
0.50
0.55
0.50
0.55
0.50
0.55
Dimensions
Angle
CV
XT*
0.67
0.65
0.67
0.65
0.67
0.65
0.67
0.65
0.67
0.65
0.67
0.65
0.67
0.65
0.67
0.65
0.67
0.65
0.67
0.65
0.39
0.52
0.39
0.52
0.39
0.52
0.39
0.52
0.39
0.52
0.39
0.52
0.39
0.52
0.39
0.52
0.39
0.52
0.39
0.52
Inch
mm
Inch
mm
1.20
30.5
1.20
30.5
1.00
25.4
1.00
25.4
1.03
26.2
1.03
26.2
1.20
30.5
1.20
30.5
1.23
31.2
1.23
31.2
1.23
31.2
1.23
31.2
1.16
29.5
1.16
29.5
1.16
29.5
1.16
29.5
1.24
31.5
1.24
31.5
1.24
31.5
1.24
31.5
Catalog 4110-NV
Flow Characteristics
NP6
Note: When combining seat and seal materials, the most restrictive
temperature rating becomes the limiting factor on temperature range.
How to Order
The correct part number is easily derived from the following example and ordering chart. The six product
characteristics required are coded as shown in the chart.
Example 1, below, describes an angle pattern NP6 Series needle valve equipped with 1/4" CPI compression
inlet and outlet ports, a PCTFE tipped stem, Nitrile seals, and stainless steel construction with panel mounting nut.
Example 2, below, describes an inline pattern NP6 Series needle valve equipped with 1/4" male NPT inlet port, 1/4"
female NPT outlet port, a blunt stem type, PTFE stem seal, stainless steel construction with panel mounting nut.
Example 1: 4Z-NP6AK-BN-SSP (shown in the part number blocks below)
Example 2: 4M4F-NP6LR-SSP
4Z
Inlet
Port*
Outlet
Port*
Inlet
Outlet
Port
Port
4A
6A
M6A
4F
6Z
M6Z
4M
M8A
4Z
M8Z
NP6A
Valve
Series
Stem
Type
Valve
Series
NP6L
NP6A
Stem
Type
R Blunt
K PCTFE
BN
Stem
Seal
SSP
Body
Material
Stem
Body
Seal
Material
SSP Stainless
Blank PTFE
Steel with
BN
Nitrile Rubber
Panel Nut
EPR Ethylene
Propylene Rubber
V
Fluorocarbon
Rubber
G
Grafoil
*If the inlet and outlet ports are the same, eliminate the outlet port designator.
26
Catalog 4110-NV
NP6
27
Catalog 4110-NV
Introduction
Parker compact SN6 Needle Valves provide shut-off and coarse regulation of liquids and gases utilized in process
and instrumentation applications. These rugged valves are manufactured from stainless steel barstock and are
integral bonnet designs with packing above the stem threads.
SN6
Features
Specifications
Integral bonnet design
316 stainless steel construction
Choice of two stem types:
R-Stem All metal, blunt stem tip
K-Stem PCTFE stem tip
Choice of PTFE or Grafoil packing
Inline and angle patterns
100% factory tested
Pressure Rating:
R Stem: 6000 psig (414 bar) CWP
K Stem: 3000 psig (207 bar) CWP
Materials of Construction
Temperature Rating:
PTFE Packing:
-65F to 450F (-54C to 232C)
PCTFE Stem Tip:
-65F to 350F (-54C to 177C)
3
4
Model Shown:
4F4M-SN6LR-SS
Item #
Description
Body
Packing Nut
Packing*
Packing Gland
Packing Washer
Stem
(R-Stem)
Stem
(K-Stem)
Handle**
Handle Screw
6
7
8
9
Material
ASTM A 182
Type 316
ASTM A 479
Type 316
PTFE
ASTM A 276
Type 316
Stainless Steel
ASTM A 276
Type 316
ASTM A 276
Type 316, with PCTFE
Aluminum
Stainless Steel
28
Catalog 4110-NV
1.00
( 25.4)
Model Shown:
4M-SN6AK-SS
.42 (10.7)
Model Shown:
4Z-SN6LR-G-SS
.40 (10.2)
A
.42 (10.7)
Angle
4A-SN6LR
4A-SN6LK
4F-SN6LR
4F-SN6LK
4M-SN6LR
4M-SN6LK
4Z-SN6LR
4Z-SN6LK
4M4A-SN6LR
4M4A-SN6LK
4M4F-SN6LR
4M4F-SN6LK
4M4Z-SN6LR
4M4Z-SN6LK
4A-SN6AR
4A-SN6AK
4F-SN6AR
4F-SN6AK
4M-SN6AR
4M-SN6AK
4Z-SN6AR
4Z-SN6AK
4M4A-SN6AR
4M4A-SN6AK
4M4F-SN6AR
4M4F-SN6AK
4M4Z-SN6AR
4M4Z-SN6AK
End Connections
Inlet
(Port 1)
Outlet
(Port 2)
1/4"
A-LOK
1/4" Male
NPT
1/4" Female
NPT
1/4" Male
NPT
1/4" CPI
Stem
Type
Orifice
Inch
mm
Blunt
PCTFE
Blunt
PCTFE
Blunt
PCTFE
Blunt
PCTFE
Blunt
PCTFE
Blunt
PCTFE
Blunt
PCTFE
0.125
3.2
0.125
3.2
0.125
3.2
0.125
3.2
0.125
3.2
0.125
3.2
0.125
3.2
* Tested in accordance with ISA S75.02. Gas flow will be choked when P1 - P2 / P1 = XT.
For CPI and A-LOK, dimensions are measured with nuts in the finger tight position.
29
Flow Data
Inline
XT*
CV
0.29
0.23
0.29
0.23
0.29
0.23
0.29
0.23
0.29
0.23
0.29
0.23
0.29
0.23
0.56
0.63
0.56
0.63
0.56
0.63
0.56
0.63
0.56
0.63
0.56
0.63
0.56
0.63
Dimensions
Angle
CV
XT*
0.34
0.27
0.34
0.27
0.34
0.27
0.34
0.27
0.34
0.27
0.34
0.27
0.34
0.27
0.55
0.58
0.55
0.58
0.55
0.58
0.55
0.58
0.55
0.58
0.55
0.58
0.55
0.58
A
Inch
B
mm
Inch
mm
SN6
Catalog 4110-NV
Notes:
To determine MPa, multiply bar by 0.1
When combining seat and seal materials, the most restrictive
temperature rating becomes the limiting factor on temperature
range.
SN6
How to Order
The correct part number is easily derived from the following example and ordering chart. The six product
characteristics required are coded as shown in the chart.
Example 1, below, describes an SN6 valve, inline, blunt stem, 316 SS, 1/4" CPI tube inlet and outlet ports, and
a PTFE packing.
Example 2, below, describes an SN6 valve, angle, PCTFE stem tip, 316 SS, 1/4" male pipe inlet port, 1/4" female
pipe outlet port, and a PTFE packing.
Example 1: 4Z-SN6LR- SS (shown in the part number blocks below)
Example 2: 4M4F-SN6AK-SS
4Z
Inlet
Port*
Size
4
Outlet
Port*
Inlet
Outlet
Port
Port
A A-LOK (tube)
Z CPI (tube)
M Male pipe (NPT)
F Female pipe (NPT)
SN6L
Valve
Series
Stem
Type
Valve
Series
SN6L
SN6A
Stem
Type
R Blunt (20)
K PCTFE
Packing
Packing
Blank PTFE
G
Grafoil
SS
Body
Material
Body
Material
SS 316 Stainless
Steel
*If the inlet and outlet ports are the same, eliminate the outlet port designator.
Note: Handles: SN6 valves with R-Stem are standard with 316 SS T-bar handles. SN6 valves with K-Stem are
standard with round anodized aluminum handles, 1.00 inch diameter. SN6 valves are not panel mountable.
30
Notes
Catalog 4110-NV
SN6
31
Catalog 4110-NV
Introduction
Parker Rising Plug and Gauge/Root Valves are available with a variety of seat and seal materials. They are
screwed bonnet designs featuring bonnet lock plates. The PV and PVG Series of valves provide a straight-through
flow path in two orifice sizes. The valves utilize a non-wetted upper stem and a non-rotating lower stem in conjunction with a tapered seat for positive shut-off and long seat life, even in particulated media.
Features
Materials of Construction
Bi-directional flow
Roddable, straight through flow path
Bonnet lock plate resists accidental bonnet
disengagement
Stem dust seal helps protect stem from external
contamination
Inlet side optional outlet PVG 1/4" Female NPT
PVG 1/2" Female NPT
Rugged 316 stainless steel barstock construction
Panel mounting option
Gauge port option
100% factory tested
13
14
6
11
12
PV
Specifications
10
Pressure Rating:
Acetal Seat (DE): 6000 psig (414 bar) CWP
PEEK Seat (PK): 6000 psig (414 bar) CWP
PCTFE Seat (K): 2200 psig (152 bar) CWP
PFA Seat (PFA): 750 psig (52 bar) CWP
1
7
Temperature Rating:
Model Shown:
4M4F-PV4DE-BN-SS
Seats
Acetal:
-20F to 250F (-29C to 121C)
PEEK and PFA:
-20F to 400F (-29C to 204C)
PCTFE:
-20F to 200F (-29C to 93C)
Item #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Stem Seals
Nitrile Rubber (BN), Silicone Rubber (SI), and
Ethylene Propylene Rubber (EPR):
-20F to 250F (-29C to 121C)
Fluorocarbon Rubber (V):
-20F to 400F (-29C to 204C)
Highly Fluorinated Fluorocarbon Rubber (KZ):
-20F to 200F (-29C to 93C)
Flow Data
Description
Body
Bonnet
Lower Stem
Upper Stem
Stem Seal*
Back-up Rings
Seat*
Dust Seal
Seat Pin (not shown)
Lock Plate
Lock Plate Screw
Lock Washer
Handle
Handle Screw
Material
ASTM A 479 Type 316
ASTM A 479 Type 316
ASTM A 276 Type 316
ASTM A 564 Type 316
Fluorocarbon Rubber
PTFE
Acetal
PTFE
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
32
Catalog 4110-NV
2.20
(55.9)
2.20
(55.9)
E: Open
F: Close
E: Open
F: Close
Model Shown:
4F-PV4DE-V-SS
Model Shown:
4F-PVG4PK-EPR-SS
Dimensions
Basic
Part
Number
End Connection
Inlet
(Port 1)
Outlet
(Port 2)
4A-PV4
4F-PV4
4F-PVG4
4M4F-PV4
4Z-PV4
6A-PV4
6Z-PV4
8M4F-PV4
8M4F-PVG4
6M6F-PVG8
8A-PV8
8F-PV8
8M8F-PV8
8M8F-PVG8
8Z-PV8
12M8F-PV8
A
Inch
1.73
1.13
1.75
1.78
1.73
1.79
1.79
1.90
3.13
3.33
1.91
1.33
2.17
3.33
1.91
2.17
mm
43.9
28.7
44.5
45.2
43.9
45.5
45.5
48.3
79.5
84.6
48.5
33.8
55.1
84.6
48.5
55.1
B
Inch
1.73
1.13
1.13
1.13
1.73
1.79
1.79
1.13
1.75
2.25
1.91
1.33
1.33
2.25
1.91
1.33
For CPI and A-LOK, dimensions are measured with nuts in the finger tight position.
33
mm
43.9
28.7
28.7
28.7
43.9
45.5
45.5
28.7
44.5
57.2
48.5
33.8
33.8
57.2
48.5
25.4
Inch
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.56
0.56
0.56
0.56
0.56
0.56
0.56
PV
Catalog 4110-NV
Flow Characteristics
How to Order
PV
The correct part number is easily derived from the following example and ordering chart. The six product
characteristics required are coded as shown in the chart.
Example 1, below, describes a PV4 Series rising stem plug valve equipped with 1/4" CPI compression inlet and
outlet ports, a PCTFE seat, Nitrile stem seals, and stainless steel construction.
Example 2, below, describes a PVG4 Series rising stem plug valve with 1/4" gauge ports equipped with a 1/4"
Male NPT inlet port and 1/4" Female NPT outlet port, an acetal seat, fluorocarbon stem seals, and stainless steel
construction with panel mounting option.
Example 1: 4Z-PV4K-BN-SS (shown in the part number blocks below)
Example 2: 4M-PVG4DE-V-SSP
4Z
Inlet
Port*
Inlet
Port*
4A
4M
4F
4Z
6M
8A
6F
8F
Outlet
Port*
Outlet
Port*
6A
8M
6Z
8Z
12M
PV4
Valve
Series
Seat
Type
Valve
Series
PV4
PVG4
PV8
PVG8
Seat
Type
DE Acetal
K PCTFE
PK PEEK
PFA PFA
BN
Stem Seal
Material
SS
Body
Material
Stem
Seal
V
Fluorocarbon
Rubber
BN Nitrile Rubber
SI Silicone Rubber
EPR Ethylene Propylene
Rubber
KZ Highly Fluorinated
Fluorocarbon
Rubber
Body
Material
SS Stainless Steel
SSP Stainless Steel
with Panel
Mounting Option
*If the inlet and outlet ports are the same, eliminate the outlet port designator.
34
Notes
Catalog 4110-NV
PV
35
Catalog 4110-NV
Female NPT
To 15,000 PSI
MP7
MF
Parker MPI
(Medium Pressure
Inverted)
To 15,000 PSI
Materials of Construction
MPN
Item #
Description
Material
1
2
3
4
5
6
7
8
9
10
11
12
Steel
Aluminum
17-4PH
316SS
300 SER. SS
300 SER. SS
304SS
416SS
PTFE
316SS
17-4PH-H900
316SS
36
Catalog 4110-NV
The correct part number is easily derived from the following example and ordering chart. The nine product
characteristics required are coded as shown in the chart.
The following example describes an MPN Series needle valve with 1/4" MPI connections, 2 way angle flow path,
blunt stem, PTFE packing, stainless steel body and the option for over critical service.
Example: 4MP7-MPNAB-T-SS-OC
4
MP7
Inlet/Outlet
Connection
Connection
Type
Size
Inlet /
Outlet
Connection
Size
2* 1/8"
4
1/4"
6
3/8"
1/2"
8
9** 9/16"
12
3/4"
1"
16
Connection
Type
F
Female
Pipe
MP7 Parker
MPI
MF Female
Cone &
Thread
W Tube
Socket
Weld
* Female Pipe
PSW Pipe
Only
Socket
** MP7 and MF
Weld
only
MPN
Valve
Series
Valve
Type
Stem
Type
Valve
Series
MPN
High
Flow
Stem
Type
B Blunt
R Regulating
Valve
Type
L
2-Way Inline
A
2-Way Angle
X***I 3-Way 2-Pressure
Connections
X***D 3-Way 2-Stem
Connection
A***R 2-Way Angle Valve
(Replaceable
Seat)
SS
Packing
Material
Body
Material
Packing
Material
T PTFE
G Graphoil
Body
Material
SS Stainless
Steel
High
Flow
Blank Standard Flow
H
High Flow
OC
Options
Options
(See Below)
OC Over Critical
HYD Hydrogen
Compatible
LT Low
Temperature
MPN
37
Catalog 4110-NV
Valve
Size
Screw
Size
8 & 9
12
16
1.25
1.375
1.75
2.50
.219
.219
.219
.219
10 - 32
10 - 32
10 - 32
10 - 32
4 & 6
Tubing
Size
Parker Part No.
PSI
Connection
Orifice
A
B
C
D
MPN
1/4" O.D.
3/8" O.D.
1/2" O.D.
9/16" O.D.
3/4" O.D.
3/4" O.D.
1" O.D.
4MP7-MPNLB-T-SS
6MP7-MPNLB-T-SS
8MP7-MPNLB-T-SS
9MP7-MPNLB-T-SS
12MP7-MPNLB-T-SS
12MP7-MPNLBH-T-SS
16MP7-MPNLB-T-SS
15,000
15,000
15,000
15,000
15,000
10,000
12,500
Pipe Size Parker Part No.
PSI
1/8" NPT
1/4" NPT
3/8" NPT
1/2" NPT
3/4" NPT
1" NPT
2F-MPNLB-T-SS
4F-MPNLB-T-SS
6F-MPNLB-T-SS
8F-MPNLB-T-SS
12F-MPNLB-T-SS
16F-MPNLB-T-SS
15,000
15,000
15,000
15,000
10,000
10,000
1/4" MPI
3/8" MPI
1/2" MPI
9/16" MPI
3/4" MPI
3/4" MPI
1" MPI
0.125
0.203
0.313
0.313
0.438
0.516
0.563
4.50
4.50
6.26
6.26
7.00
7.00
8.42
2.50
2.50
3.00
3.00
4.13
4.13
4.13
0.50
0.50
0.63
0.63
0.75
0.75
0.88
0.94
0.94
1.25
1.25
1.50
1.50
1.81
Connection
Female NPT Orifice
A
B
C
D
1/8"
1/4"
3/8"
1/2"
3/4"
1"
0.203
0.203
0.312
0.312
0.687
0.687
4.38
4.38
6.13
6.38
8.50
8.50
2.00
2.00
2.50
2.63
4.13
4.13
0.38
0.38
0.50
0.75
0.88
0.88
0.81
0.81
1.13
1.38
1.81
1.81
.75
1.00
1.19
1.63
Inches
E
Th'k
2.13
2.13
3.00
3.00
3.75
3.75
4.63
0.38
0.38
0.50
0.50
0.63
0.63
1.13
1.25
1.25
1.38
1.38
1.75
1.75
2.50
0.22
0.22
0.34
0.34
0.44
0.44
0.56
1.00
1.00
1.38
1.38
1.75
1.75
1.75
Inches
E
Th'k
2.00
2.00
2.88
3.13
4.63
4.63
0.38
0.38
0.50
0.50
1.13
1.13
1.25
1.25
1.38
1.38
2.50
2.50
0.22
0.22
0.34
0.34
0.56
0.56
0.75
0.75
1.00
1.50
1.75
1.75
38
Catalog 4110-NV
Valve
Size
Screw
Size
8 & 9
12
16
1.25
1.375
1.75
2.50
.219
.219
.219
.219
10 - 32
10 - 32
10 - 32
10 - 32
4 & 6
Tubing
Parker Part No.
PSI
Connection
Orifice
A
B
C
1/4" O.D.
3/8" O.D.
1/2" O.D.
9/16" O.D.
3/4" O.D.
3/4" O.D.
1" O.D.
1" O.D.
4MP7-MPNAB-T-SS
6MP7-MPNAB-T-SS
8MP7-MPNAB-T-SS
9MP7-MPNAB-T-SS
12MP7-MPNAB-T-SS
12MP7-MPNABH-T-SS
16MP7-MPNAB-T-SS
16MP7-MPNABH-T-SS
15,000
15,000
15,000
15,000
15,000
10,000
12,500
10,000
Pipe Size Parker Part No.
PSI
1/8" NPT
1/4" NPT
3/8" NPT
1/2" NPT
3/4" NPT
1" NPT
2F-MPNAB-T-SS
4F-MPNAB-T-SS
6F-MPNAB-T-SS
8F-MPNAB-T-SS
12F-MPNAB-T-SS
16F-MPNAB-T-SS
15,000
15,000
15,000
15,000
10,000
10,000
1/4" MPI
3/8" MPI
1/2" MPI
9/16 MPI
3/4" MPI
3/4" MPI
1" MPI
1" MPI
0.125
0.203
0.313
0.313
0.438
0.516
0.563
0.688
5.02
5.02
6.84
6.84
7.50
7.50
9.38
9.38
2.50
2.50
3.00
3.00
3.00
3.00
4.13
4.13
-
-
-
-
-
-
-
-
Connection
Female NPT Orifice
A
B
C
1/8" NPTF
1/4" NPTF
3/8" NPTF
1/2" NPTF
3/4" NPTF
1" NPTF
0.203
0.203
0.312
0.312
0.687
0.687
4.81
4.81
6.50
6.50
9.00
9.00
2.00
2.00
2.50
2.63
4.13
4.13
-
-
-
-
-
-
.75
1.00
1.19
1.63
Inches
D
Th'k
1.38
1.38
1.83
1.83
2.00
2.00
2.56
2.56
2.57
2.57
3.58
3.58
4.25
4.25
5.44
5.44
0.38
0.38
0.50
0.50
0.63
0.63
1.13
1.13
1.25
1.25
1.38
1.38
1.75
1.75
2.50
2.50
0.22
0.22
0.34
0.34
0.44
0.44
0.56
0.56
1.00
1.00
1.38
1.38
1.38
1.38
1.75
1.75
Inches
D
Th'k
1.25
1.25
1.50
1.50
2.31
2.31
2.44
2.44
3.25
3.25
5.13
5.13
0.38
0.38
0.50
0.50
1.13
1.13
1.25
1.25
1.38
1.38
2.50
2.50
0.22
0.22
0.34
0.34
0.56
0.56
0.75
0.75
1.00
1.50
1.75
1.75
39
MPN
Catalog 4110-NV
Valve
Size
Screw
Size
8 & 9
12
16
1.25
1.375
1.75
2.50
.219
.219
.219
.219
10 - 32
10 - 32
10 - 32
10 - 32
4 & 6
Tubing
Parker Part No.
PSI
Connection
Orifice
A
B
C
1/4" O.D. 4MP7-MPNXBI-T-SS
3/8" O.D. 6MP7-MPNXBI-T-SS
1/2" O.D. 8MP7-MPNXBI-T-SS
9/16" O.D. 9MP7-MPNXBI-T-SS
3/4" O.D. 12MP7-MPNXBI-T-SS
3/4" O.D. 12MP7-MPNXBIH-T-SS
1" O.D. 16MP7-MPNXBI-T-SS
1" O.D. 16MP7-MPNXBIH-T-SS
15,000
15,000
12,500
12,500
15,000
10,000
12,500
10,000
1/4" MPI
3/8" MPI
1/2" MPI
9/16" MPI
3/4" MPI
3/4" MPI
1" MPI
1" MPI
0.125
0.203
0.313
0.313
0.438
0.516
0.563
0.688
5.21
5.21
7.09
7.09
7.88
7.88
9.75
9.75
2.50
2.50
3.00
3.00
3.00
3.00
4.13
4.13
.75
1.00
1.19
1.63
Inches
D
Th'k
1.65
1.65
2.12
2.12
2.38
2.38
3.06
3.06
2.84
2.84
3.88
3.88
4.63
4.63
5.88
5.88
0.38
0.38
0.50
0.50
0.63
0.63
1.13
1.13
1.25
1.25
1.38
1.38
1.75
1.75
2.50
2.50
0.22
0.22
0.34
0.34
0.44
0.44
0.56
0.56
1.00
1.00
1.38
1.38
1.38
1.38
1.75
1.75
1.21
1.21
1.50
1.50
2.63
2.63
2.13
2.13
MPN
Valve
Size
Screw
Size
8 & 9
12
16
1.25
1.375
1.75
2.50
.219
.219
.219
.219
10 - 32
10 - 32
10 - 32
10 - 32
4 & 6
Tubing
Parker Part No.
PSI
Connection
Orifice
A
B
C
1/4" O.D. 4MP7-MPNXBO-T-SS
3/8" O.D. 6MP7-MPNXBO-T-SS
1/2" O.D. 8MP7-MPNXBO-T-SS
9/16" O.D. 9MP7-MPNXBO-T-SS
3/4" O.D. 12MP7-MPNXBO-T-SS
3/4" O.D. 12MP7-MPNXBOH-T-SS
1" O.D. 16MP7-MPNXBO-T-SS
1" O.D. 16MP7-MPNXBOH-T-SS
15,000
15,000
15,000
15,000
15,000
10,000
12,500
10,000
1/4" MPI
3/8" MPI
1/2" MPI
9/16" MPI
3/4" MPI
3/4" MPI
1" MPI
1" MPI
0.125
0.203
0.313
0.313
0.438
0.516
0.563
0.688
5.02
5.02
6.84
6.84
7.50
7.50
9.38
9.38
2.50
2.50
3.00
3.00
3.00
3.00
4.13
4.13
1.38
1.38
1.88
1.88
2.00
2.00
2.63
2.63
.75
1.00
1.19
1.63
Inches
D
Th'k
1.38
1.38
1.88
1.88
2.00
2.00
2.63
2.63
2.57
2.57
3.63
3.63
4.25
4.25
5.44
5.44
0.38
0.38
0.50
0.50
0.63
0.63
1.13
1.13
1.25
1.25
1.38
1.38
1.75
1.75
2.50
2.50
0.22
0.22
0.34
0.34
0.44
0.44
0.56
0.56
1.00
1.00
1.38
1.38
1.38
1.38
1.75
1.75
40
Catalog 4110-NV
Valve
Size
Screw
Size
8 & 9
12
16
1.25
1.375
1.75
2.50
.219
.219
.219
.219
10 - 32
10 - 32
10 - 32
10 - 32
4 & 6
Tubing
Parker Part No.
PSI
Connection
Orifice
A
B
C
1/4" O.D.
3/8" O.D.
1/2" O.D.
9/16" O.D.
3/4" O.D.
3/4" O.D.
1" O.D.
1" O.D.
4MP7-MPNXBD-T-SS
6MP7-MPNXBD-T-SS
8MP7-MPNXBD-T-SS
9MP7-MPNXBD-T-SS
12MP7-MPNXBD-T-SS
12MP7-MPNXBDH-T-SS
16MP7-MPNXBD-T-SS
16MP7-MPNXBDH-T-SS
15,000
15,000
15,000
15,000
15,000
10,000
12,500
10,000
1/4" MPI
3/8" MPI
1/2" MPI
9/16" MPI
3/4" MPI
3/4" MPI
1" MPI
1" MPI
0.125
0.203
0.313
0.313
0.438
0.516
0.563
0.688
5.75
5.75
8.38
8.38
9.75
9.75
12.19
12.19
2.50
2.50
3.00
3.00
3.00
3.00
4.13
4.13
.75
1.00
1.19
1.63
Inches
D
Th'k
1.19
1.19
1.75
1.75
2.25
2.25
2.81
2.81
3.38
3.38
5.13
5.13
6.50
6.50
8.25
8.25
0.38
0.38
0.50
0.50
0.63
0.63
1.13
1.13
1.25
1.25
1.38
1.38
1.75
1.75
2.50
2.50
0.22
0.22
0.34
0.34
0.44
0.44
0.56
0.56
1.00
1.00
1.38
1.38
1.38
1.38
1.75
1.75
1.70
1.70
2.56
2.56
3.25
3.25
4.13
4.13
Valve
Size
Screw
Size
8 & 9
12
16
1.25
1.375
1.75
2.50
.219
.219
.219
.219
10 - 32
10 - 32
10 - 32
10 - 32
4 & 6
Tubing
Parker Part No.
PSI
Connection
Orifice
A
B
C
1/4" MPI
3/8" MPI
1/2" MPI
9/16" MPI
3/4" MPI
3/4" MPI
1" MPI
1" MPI
0.125
0.203
0.313
0.313
0.438
0.516
0.563
0.688
5.87
5.87
8.25
8.25
8.88
8.88
11.13
11.13
2.50
2.50
3.00
3.00
3.00
3.00
4.13
4.13
-
-
-
-
-
-
-
-
.75
1.00
1.19
1.63
Inches
D
Th'k
1.38
1.38
2.00
2.00
2.00
2.00
2.56
2.56
2.57
2.57
3.63
3.63
4.25
4.25
5.44
5.44
0.38
0.38
0.50
0.50
0.63
0.63
1.13
1.13
1.25
1.25
1.38
1.38
1.75
1.75
2.50
2.50
0.22
0.22
0.34
0.34
0.44
0.44
0.56
0.56
1.00
1.00
1.38
1.38
1.38
1.38
1.75
1.75
41
MPN
Catalog 4110-NV
Dimensions in inches/millimeters
are for reference only, subject to change.
Size
PSI
Connection
Orifice
Th'k
1/4" O.D.
3/8" O.D.
1/2" O.D.
9/16" O.D.
3/4" O.D.
1" O.D.
1/8" NPT
1/4" NPT
3/8" NPT
1/2" NPT
3/4" NPT
1" NPT
4MP7-MPNLB-G-SS-OC
6MP7-MPNLB-G-SS-OC
8MP7-MPNLB-G-SS-OC
9MP7-MPNLB-G-SS-OC
12MP7-MPNLB-G-SS-OC
16MP7-MPNLB-G-SS-OC
2F-MPNLB-G-SS-OC
4F-MPNLB-G-SS-OC
6F-MPNLB-G-SS-OC
8F-MPNLB-G-SS-OC
12F-MPNLB-G-SS-OC
16F-MPNLB-G-SS-OC
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
4MP7
6MP7
8MP7
9MP7
12MP7
16MP7
1/8" NPTF
1/4" NPTF
3/8" NPTF
1/2" NPTF
3/4" NPTF
1" NPTF
0.125
0.203
0.313
0.313
0.438
0.563
0.203
0.203
0.312
0.312
0.687
0.687
4.50
4.50
6.26
6.26
7.00
8.42
4.38
4.38
6.13
6.38
8.50
8.50
2.50
2.50
3.00
3.00
3.00
4.13
2.00
2.00
2.5
2.63
4.13
4.13
0.50
0.50
0.63
0.63
0.75
0.88
0.38
0.38
0.50
0.75
0.88
0.88
0.94
0.94
1.25
1.25
1.50
1.81
0.81
0.81
1.13
1.38
1.81
1.81
2.13
2.13
3.00
3.00
3.75
4.63
2.00
2.00
2.88
3.13
4.63
4.63
0.38
0.38
0.50
0.50
0.63
1.13
0.38
0.38
0.50
0.50
1.13
1.13
1.25
1.25
1.38
1.38
1.75
2.5
1.25
1.25
1.38
1.38
2.5
2.5
0.22
0.22
0.34
0.34
0.44
0.56
0.22
0.22
0.34
0.34
0.56
0.56
0.75
0.75
1.00
1.00
1.38
1.75
0.75
0.75
1.00
1.50
1.75
1.75
Materials of Construction
MPN
42
Item #
Description
Material
1
2
3
4
5
6
7
8
9
10
11
12
Set Screw
Handle
Upper Stem Assembly
Packing Gland
Locking Device
Lock Screw
Stem Pin
Top Packing Washer
Packing
Bottom Pack Washer
Lower Stem
Body
316SS
303SS
416SS
316SS
304SS
304SS
304SS
416SS
Grafoil
316SS
316SS
316SS
Catalog 4110-NV
Bleed Valve
Materials of Construction
2
1
3
4
6
Item #
Qty
Description
Material
1
2
3
4
1
1
1
2
O-Ring
Body
300 Ser. SS
Aluminum
17-4PH-H900
420SS
Fluorocarbon
Rubber*
316SS
Parker
Part No.
PSI
Connection
Example: 9T7-MPBV-KZ-SS
9T7-MPBV-V-SS 15,000
9/16" Tube Stub
9HM-MPBV-V-SS 30,000 9/16" High Pressure Male
Gauge Valve
Materials of Construction
2
MPN
1
3
4
6
10
8
7
9
Parker
Part No.
PSI
Connection
9MP7-MPGV-V-SS 15,000
9/16" MPI
9HF-MPGV-V-SS 30,000 9/16" High Pressure Female
43
Item #
Qty
Description
Material
1
2
3
4
5
6
7
8
9
10
1
1
1
1
1
1
1
1
1
1
Steel
Aluminum
17-4PH
316SS
300 Ser. SS
300 Ser. SS
416SS
Fluorocarbon Rubber
316SS
316SS
Catalog 4110-NV
Sample Cylinders
Parker stainless steel sample cylinders provide safe containment
for storage and transportation of both liquids and gases. These
cylinders are DOT rated to 1800 psig (124 bar) at 70F (21C).
Applications include hydrocarbon sampling in refineries, gas
sampling in chromatography, and condensate sampling in fossil fuel
and nuclear power plants.
ANSI/ASME B1.20.1 internal pipe threads are machined into both
ends of each cylinder to engage external pipe connections of Parker
valves, rupture disc units, or fittings.
4F-SC75D-SS
4F-SC150D-SS
Specifications
4F-SC300D-SS
4F-SC500D-SS
Cyl &
Acc
DOT-3A 1800:
1000 and 2250cc with 1/4" NPT threads
4F-SC1000D-SS
DOT-3A 1800:
3785cc (1 gallon) with 1/2" NPT threads
4F-SC2250D-SS-WC
8F-SC1GD-SS-WC
44
Catalog 4110-NV
Material
316
Stainless
Steel
DOT
DOT-3E 1800
DOT-3A 1800
Dimensions (ref.)
Outside Diameter
Min.
Internal
Volume
(cc)
Single-End*
Double-End
inch
mm
inch
mm
lb.
kg
75
150
300
500
1000
2250
3785
4F-SC75S-SS
4F-SC150S-SS
4F-SC300S-SS
4F-SC500S-SS
4F-SC1000S-SS
4F-SC2250S-SS-WC
8F-SC1GS-SS-WC
4F-SC75D-SS
4F-SC150D-SS
4F-SC300D-SS
4F-SC500D-SS
4F-SC1000D-SS
4F-SC2250D-SS-WC
8F-SC1GD-SS-WC
4.88
8.13
9.25
13.88
9.50
16.5**
25.5**
124
206
235
352
241
419**
648**
1.50
1.50
2.00
2.00
4.00
4.00
4.00
38
38
51
51
102
102
102
0.60
1.00
1.80
2.50
7.50
12.00
17.80
0.27
0.45
0.82
1.14
3.41
5.45
8.09
Part Number
Length
* A stainless steel pipe plug is supplied for use in one end of the cylinder when a single-ended cylinder is ordered.
**Includes threaded neck rings and caps. Add 6-1/4" (159mm) to each end to include cap lengths.
Approx.Weight
Cyl &
Acc
45
Catalog 4110-NV
Specifications
Pressure Rating: 5000 psig CWP (345 bar)
Temperature Rating:
With PTFE packings
R stem: -65F to 450F (-54C to 232C)
K stem: -65F to 350F (-54C to 177C)
With Nitrile rubber packing
-30F to 250F (-34C to 121C)
With Fluorocarbon rubber packings
-15F to 400F (-26C to 204C)
With Ethylene propylene rubber packing
-70F to 275F (-21C to 135C)
With Neoprene rubber packing
-65F to 250F (-54C to 121C)
Ports: ANSI/ASME B1.20.1; 1/4" external pipe threads
Orifice: 0.176" (4.5mm)
Materials of Construction
3
How to Order
Dimensions in inches/millimeters are for reference only, subject to change.
Cyl &
Acc
Inlet
Port
Inlet
Port
4M
VL4C
Valve
Series
Stem
Type
Valve
Series
VL4C
BN
Optional
Stem*
SS
Body
Material
Stem
Optional Elastomeric
Body
Type
Stem Packaging
Material
K PCTFE V
Fluorocarbon SS Stainless
Rubber
Steel
R All
metal,
BN Nitrile Rubber
blunt tip EPR Ethylene
Propylene
Rubber
NE Neoprene
Rubber
46
8
2
4
6
Item #
Description
1
Body
2
Packing Nut
3
Handle
4
Lower Packing Washer
5
Handle Set Screw
6
Packing
7
R Stem
7
K Stem
Material
ASTM A 182 Type F316
ASTM A 479 Type 316
ASTM B 211 Alloy A92024
316 Stainless Steel
316 Stainless Steel
PTFE
ASTM A 276 Type 316
ASTM A 276
Type 316 with PCTFE
Commercial Brass
Catalog 4110-NV
Specifications
Pressure Rating*:
1800 psig at 70F (124 bar at 21C)
Temperature Rating:
With standard PTFE gasket
-65F to 150F (-54C to 66C)
With optional metal gasket
-65F to 400F (-54C to 204C)
Materials of Construction
Part Description
Body
Plug
Ruptured Disk
Gasket
Material
ASTM A 182 Type F316
ASTM A 479 Type 316
AISI Type 316*
PTFE or 316 Stainless Steel with PTFE Coating
Precautions
1. Ensure the minimum burst pressure rating of the
Rupture Disc Unit is approximately 40% higher than
the cylinder service (filling) pressure.
2. Do not use Rupture Disc Units in a location where the
release of the contents may cause death, personal
injury and property damage. Rupture Disc Units are
a CGA Type CG-1 pressure relief device and are
designed to release the entire contents of the cylinder
to atmosphere.
3. Follow the minimum recommended practices for maintenance and inspection of pressure relief devices in
CGA Pamphlet S-1.1. Inspect the rupture disc frequently. Preferably, replace the disc yearly. Temperature and
pressure cycling, and corrosive media can affect the
discs burst pressure.
4. For additional information on Parker Rupture Disc
Units, refer to any of the Maintenance and Installation
Instructions for Rupture Discs and Combination Needle/
Rupture Discs (INI-207, INI-219, MI-107, and MI-117).
Options
Dimensions
A
Part Number
Inlet
Outlet
Inch
mm
Inch
mm
Inch
mm
Inch
mm
25.4
35.1
1.00
1.38
25.4
35.1
0.53
0.61
13.5
15.5
1.15
1.31
29.2
33.3
47
Cyl &
Acc
Catalog 4110-NV
Specifications
Pressure Rating:
Valve 5000 psig CWP (345 bar)
Rupture Disc 1800 psig (124 bar)
Cyl &
Acc
Temperature Rating:
Model Shown:
Model Shown:
With standard PTFE gasket
4M4F-RV6LCK-18-SS
4M4F-RV6ACK-18-SS
-65F to 150F (-54C to 66C)
() Denotes dimensions in millimeters
With optional metal gasket and
proper seal
How to Order
-65F to 400F (-54C to 204C)
Dimensions in inches/millimeters are for reference only, subject to change.
With PTFE packing
Inline Pattern: 4M4F-RV6LCK-18-SS
-65F to 350F (-54C to 177C)
Angle Pattern: 4M4F-RV6ACK-18-SS
With Nitrile rubber packing
NOTES:
-30F to 250F (-34C to 121C)
With Fluorocarbon rubber packing
1) To obtain optional elastomeric stem packaging, insert one of
-15F to 400F (-26C to 204C)
the following designators prior to -SS:
With Ethylene propylene rubber packing
-BN Nitrile rubber
-70F to 275F (-21C to 135C)
-V
Fluorocarbon rubber
With Neoprene rubber packing
-EPR Ethylene propylene rubber
-65F to 250F (-54C to 121C)
-NE Neoprene rubber.
Example: 4M4F-RV6LCK-18-V-SS
Ports: ANSI/ASME B1.20.1;
Inlet 1/4" external pipe threads
2) To obtain the optional high temperature gasket, add the suffix
Outlet 1/4" internal pipe threads
-HT to the end of the part number.
Example: 4M4F-RV6LCK-18-V-SS-HT
Orifice: 0.176" (4.5mm)
6
Materials of Construction
Item #
Description
1
Stem
2
Packing Nut
3
Body
4
Plug
5
Handle Set Screw
6
Handle
7
Packing
8
Lower Packing Washer
9
Gasket
10
11
Rupture Disc
Upper Packing Washer
Material
ASTM A 276 Type 316 with PCTFE
ASTM A 479 Type 316
ASTM A 182 Type F316
ASTM A 479 Type 316
316 Stainless Steel
ASTM B 211 Alloy A92024
PTFE
316 Stainless Steel
PTFE or
316 Stainless Steel with PTFE coating
AISI Type 316
Commercial Brass
11
1
2
7
8
9
10
4
48
Catalog 4110-NV
Model Shown:
4M4F-RV6L-SS-2
A 316 stainless steel dip tube will be supplied press fit to the
Male NPT port of Male x Female Pipe Adapters. They are
available with 1/4" or 1/2" NPT threads. Specify the custom
DT6L fitting by adding the dip tube length to the end of the part
number. The length is measured from the end of the forging.
Example 1: 4M4F-DT6L-SS-3. Describes a 1/4" MNPT x 1/4"
FNPT Fitting with a 3 inch (76 mm) long dip tube.
Example 2: 8M8F-DT6L-SS-2. Describes a 1/2" MNPT x 1/2"
FNPT Fitting with a 2 inch (51 mm) long dip tube.
Cyl &
Acc
49
Model Shown:
4M4F-DT6L-SS-2
End Connections
Catalog 4110-NV
F ANSI/ASME B1.20.1
internal pipe threads
M ANSI/ASME B1.20.1
external pipe threads
KF British Standard BS 21
KM British Standard BS 21
End
Conn
50
Offer of Sale
Catalog 4110-NV
Offer of Sale
The items described in this document and other documents and descriptions provided by Parker Hannifin Corporation, its
subsidiaries and its authorized distributors (Seller) are hereby offered for sale at prices to be established by Seller. This offer
and its acceptance by any customer (Buyer) shall be governed by all of the following Terms and Conditions. Buyers order
for any item described in its document, when communicated to Seller verbally, or in writing, shall constitute acceptance of this
offer. All goods or work described will be referred to as Products.
4. Warranty. Seller warrants that the Products sold hereunder shall be free from defects in material or workmanship for
a period of twelve months from the date of delivery to Buyer
or 2,000 hours of normal use, whichever occurs first. This
warranty is made only to Buyer and does not extend to anyone
to whom Products are sold after purchased from Seller. The
prices charged for Sellers products are based upon the
exclusive limited warranty stated above, and upon the following
disclaimer: DISCLAIMER OF WARRANTY: THIS WARRANTY
COMPRISES THE SOLE AND ENTIRE WARRANTY
PERTAINING TO PRODUCTS PROVIDED HEREUNDER.
SELLER DISCLAIMS ALL OTHER WARRANTIES, EXPRESS
AND IMPLIED, INCLUDING MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
5. Claims; Commencement of Actions. Buyer shall
51
Offer of Sale
Catalog 4110-NV
01/09
52
AEROSPACE
Key Markets
Aircraft engines
Business & general aviation
Commercial transports
Land-based weapons systems
Military aircraft
Missiles & launch vehicles
Regional transports
Unmanned aerial vehicles
Key Products
Flight control systems
& components
Fluid conveyance systems
Fluid metering delivery
& atomization devices
Fuel systems & components
Hydraulic systems & components
Inert nitrogen generating systems
Pneumatic systems & components
Wheels & brakes
HYDRAULICS
Key Markets
Aerospace
Aerial lift
Agriculture
Construction machinery
Forestry
Industrial machinery
Mining
Oil & gas
Power generation & energy
Truck hydraulics
Key Products
Brass fittings & valves
Diagnostic equipment
Fluid conveyance systems
Industrial hose
PTFE & PFA hose, tubing &
plastic fittings
Rubber & thermoplastic hose
& couplings
Tube fittings & adapters
Quick disconnects
Key Products
Diagnostic equipment
Hydraulic cylinders
& accumulators
Hydraulic motors & pumps
Hydraulic systems
Hydraulic valves & controls
Power take-offs
Rubber & thermoplastic hose
& couplings
Tube fittings & adapters
Quick disconnects
CLIMATE CONTROL
Key Markets
Agriculture
Air conditioning
Food, beverage & dairy
Life sciences & medical
Precision cooling
Processing
Transportation
Key Products
CO2 controls
Electronic controllers
Filter driers
Hand shut-off valves
Hose & fittings
Pressure regulating valves
Refrigerant distributors
Safety relief valves
Solenoid valves
Thermostatic expansion valves
PNEUMATICS
Key Markets
Aerospace
Conveyor & material handling
Factory automation
Life science & medical
Machine tools
Packaging machinery
Transportation & automotive
Key Products
Air preparation
Brass fittings & valves
Manifolds
Pneumatic accessories
Pneumatic actuators & grippers
Pneumatic valves & controls
Quick disconnects
Rotary actuators
Rubber & thermoplastic hose
& couplings
Structural extrusions
Thermoplastic tubing & fittings
Vacuum generators, cups & sensors
ELECTROMECHANICAL
Key Markets
Aerospace
Factory automation
Life science & medical
Machine tools
Packaging machinery
Paper machinery
Plastics machinery & converting
Primary metals
Semiconductor & electronics
Textile
Wire & cable
Key Products
AC/DC drives & systems
Electric actuators, gantry robots
& slides
Electrohydrostatic actuation systems
Electromechanical actuation systems
Human machine interface
Linear motors
Stepper motors, servo motors,
drives & controls
Structural extrusions
PROCESS CONTROL
Key Markets
Chemical & refining
Food, beverage & dairy
Medical & dental
Microelectronics
Oil & gas
Power generation
Key Products
Analytical sample
conditioning products
& systems
Fluoropolymer chemical
delivery fittings, valves
& pumps
High purity gas delivery
fittings, valves & regulators
Instrumentation fittings,
valves & regulators
Medium pressure fittings
& valves
Process control manifolds
FILTRATION
Key Markets
Food & beverage
Industrial machinery
Life sciences
Marine
Mobile equipment
Oil & gas
Power generation
Process
Transportation
Key Products
Analytical gas generators
Compressed air & gas filters
Condition monitoring
Engine air, fuel & oil filtration
& systems
Hydraulic, lubrication &
coolant filters
Process, chemical, water
& microfiltration filters
Nitrogen, hydrogen & zero
air generators
Catalog 4110-NV
December 2010 DP