Power supplies
Power supplies
Power supplies
Overview
E.2
Introduction
E.4
E.5
E.6
Diode modules
E.30
DC/DC converters
E.32
E.38
E.44
E.46
Schuko TS35
E.50
E.1
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
Overview
connectPower 1ph
connectPower 3ph
E.2
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
Overview
Compact form
Metal housing
Universal input and output voltage of
5 V to 48 V
International approvals
WAVEGUARD
Electronic fusing
Visual fault indication and potential-free
contact
Reset input
Compact form
E.3
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
Introduction
Introduction
Transformer
Rectifier
Pulsating
DC Voltage
Stabilising
Filtering
U
constant
AC Voltage
The principle
Filtered
DC Voltage
Output
Stabilised
DC Voltage
Power supplies from Weidmller, whether regulated or unregulated, have proven themselves reliable over many years in the
supply of electrical sub-assemblies and systems. Of course,
they carry the CE mark and comply with all valid national and
international standards.
They can be put to good use in an industrial environment, in
process engineering, and in the building sector. They also
function reliably under harsh environmental conditions.
Temperature range
During operation, power supply units generate power losses
which in turn are converted to heat. This generated heat is
dissipated via a heat sink and via the surface of the housing. In
addition, the air vents in the housing allow for heat dissipation
by means of convection. Weidmller power supply units can be
used for ambient temperatures ranging from 20C to +70C,
depending on the model.
E.4
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
Standard/Approval
Description
DIN EN 50178
(VDE 0160)
DIN EN 60950-1
(VDE 0805-1)
DIN EN 61558-1
(VDE 0570-1)
Safety of transformers, power supply units, throttles and similar devices Part 1: General requirements and tests
DIN EN 61558-2-17
(VDE 0570 Part 2-17)
DIN EN 60204-1
(VDE 0113-1)
DIN EN 61204-1
DIN EN 60947-1
DIN EN 61140
IEC 38
73/23 EWG
2004/108/EG
(89/336 EWG)
2006/42/EG
(98/37 EG)
UL
CSA
GL
Test specifications for electrical/electronic devices and systems for use in marine technology
E.5
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
To increase performance, or for redundancy purposes, switchmode power supplies from Weidmller can be
connected in parallel. Two techniques are available: an active
and a passive power distribution. Active power distribution
requires more complex switching. The advantage is the exact
power distribution and uniform device loading.
Clocked switch
Transformer
Rectifier
Filter
Regulated clock
generator
Method of operation
E.6
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
Technical data
Input
Input
Output
Output voltage
Output
24 V DC oltage
Output current
max. output power
0.5 A current
12 W output power
30 ms @ 115 V AC / 80 ms @ 230 V AC
0.6 % l at 10100% load
Approvals ;
CSA;UL;CE;
Screw connection
Clamping range (rating- / min. / max.)
Length x width x height
mm2
mm
Note
Ordering data
Type
CP SNT 12W 24V 0.5A
Qty.
1
Order No.
9918840024
Note
Accessories
Note
E.7
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
CP SNT 24 W 24 V 1 A
CP SNT 24 W 28 V 1 A
FUSE
CP SNT 24 W 15 V 1.5 A
FUSE
FUSE
Technical data
Input
Input
Input
Input
Surge protection
Output
Varistor tection
Output
Varistor tection
Output
Varistor tection
Output
Output voltage
Output current
28 V DC oltage
1 A ut current
24 V DC oltage
1 A ut current
15 V DC oltage
1.5 A current
28 V output power
24 W output power
23 V output power
Surge protection
Mains failure bridge-over time 0 V AC
Varistor tection
35 ms @ 115 V AC / 160 ms @ 230 V AC
Varistor tection
35 ms @ 115 V AC / 160 ms @ 230 V AC
Varistor tection
35 ms @ 115 V AC / 160 ms @ 230 V AC
Insulation coordination
Electrical isolation, output-earth
Insulation coordination
0,5 kV cal isolation, output-earth
Insulation coordination
0,5 kV cal isolation, output-earth
Insulation coordination
0,5 kV cal isolation, output-earth
General data
Ambient temperature (operational)
General data
-20 C+50 C ure (operational)
General data
-20 C+50 C ure (operational)
General data
-20 C+50 C ure (operational)
Storage temperature
Degree of efficiency at max. load
Approvals / cULus
EMC standards 2, -3
CSA / CE / cULus
EN 61000-6 /-2, -3
CSA / CE / cULus
EN 61000-6 /-2, -3
CSA / CE / cULus
EN 61000-6 /-2, -3
Screw connection
4 / 0.08 / 4
Screw connection
4 / 0.08 / 4
Screw connection
4 / 0.08 / 4
62.5 x 52 x 90.5
62.5 x 52 x 90.5
62.5 x 52 x 90.5
Ordering data
Type
(Qty.=1)
CP SNT 24W 28V 1A
Order No.
9928890028
Type
(Qty.=1)
CP SNT 24W 24V 1A
Order No.
9928890024
Type
(Qty.=1)
CP SNT 24W 15V 1.5A
Note
Accessories
Note
E.8
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Order No.
9928890015
CP SNT 24 W 5 V 2 A
CP SNT 24 W 12 V 1.5 A
Power supplies
FUSE
FUSE
Technical data
Input
Input
Input
Surge protection
Output
Varistor tection
Output
Varistor tection
Output
Output voltage
Output current
12 V DC oltage
1.5 A current
5 V DC voltage
2 A ut current
18 V output power
10 V output power
Surge protection
Mains failure bridge-over time 0 V AC
Varistor tection
35 ms @ 115 V AC / 160 ms @ 230 V AC
Varistor tection
35 ms @ 115 V AC / 160 ms @ 230 V AC
Insulation coordination
Electrical isolation, output-earth
Insulation coordination
0,5 kV cal isolation, output-earth
Insulation coordination
0,5 kV cal isolation, output-earth
General data
Ambient temperature (operational)
General data
-20 C+50 C ure (operational)
General data
-20 C+50 C ure (operational)
Storage temperature
Degree of efficiency at max. load
Approvals / cULus
EMC standards 2, -3
CSA / CE / cULus
EN 61000-6 /-2, -3
CSA / CE / cULus
EN 61000-6 /-2, -3
Screw connection
Screw connection
4 / 0.08 / 4
62.5 x 52 x 90.5
4 / 0.08 / 4
62.5 x 52 x 90.5
mm2
mm
Ordering data
Type
CP SNT 24W 12V 1.5A
Qty.
1
Order No.
9928890012
Type
CP SNT 24W 5V 2A
Qty.
1
Order No.
9928890005
Note
Accessories
Note
E.9
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
CP SNT 25 W 5 V 5 A
FUSE
Derating curve
Technical data
Input
Input
85264 V AC / 110370 V DC
Surge protection
Output
Surge protection
Output
25 W output power
120 mVss
105 %150 % Ikonst of max. output power,
selbstttiger Wiederanlauf
Surge protection
automatic restart
Varistor tection
11 ms @ 115 V AC / 50 ms @ 230 V AC
1% trol at 10100% load
8000 F ce at output
Insulation coordination
6
5
Current (A)
4
3
2
1
0
0
10
20
30
Screw connection
Clamping range (rating- / min. / max.)
Length x width x height
mm2
mm
2.5 / 0.5 / 4
62.5 x 70 x 90.5
Note
Ordering data
Type
CP SNT 25W 5V 5A
Qty.
1
40
50
60
Order No.
8754960000
Note
Accessories
Note
E.10
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
70
80
Power supplies
CP SNT 48 W 12 V 4 A
FUSE
Derating curve
Technical data
Input
Input
85264 V AC / 110370 V DC
Surge protection
Output
Surge protection
Output
48 W output power
120 mVss
105 %150 % Ikonst of max. output power,
selbstttiger Wiederanlauf
Surge protection
automatic restart
Varistor tection
11 ms @ 115 V AC / 50 ms @ 230 V AC
1% trol at 10100% load
8000 F ce at output
Insulation coordination
Current (A)
5
4
3
2
1
0
0
10
20
30
40
50
60
70
80
Screw connection
Clamping range (rating- / min. / max.)
Length x width x height
mm2
mm
2.5 / 0.5 / 4
62.5 x 70 x 90.5
Note
Ordering data
Type
CP SNT 48W 12V 4A
Qty.
1
Order No.
8754970000
Note
Accessories
Note
E.11
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
CP SNT 48 W 24 V 2 A
FUSE
Derating curve
Technical data
Input
Input
85264 V AC / 110370 V DC
Surge protection
Output
Surge protection
Output
48 W output power
120 mVss
105 %150 % Ikonst of max. output power,
selbstttiger Wiederanlauf
Surge protection
automatic restart
Varistor tection
11 ms @ 115 V AC / 50 ms @ 230 V AC
1% trol at 10100% load
8000 F ce at output
Insulation coordination
3
2.5
Current (A)
2
1.5
1
0.5
0
0
10
20
30
Screw connection
Clamping range (rating- / min. / max.)
Length x width x height
mm2
mm
2.5 / 0.5 / 4
62.5 x 70 x 90.5
Note
Ordering data
Type
CP SNT 48W 24V 2A
Qty.
1
40
50
60
Order No.
8739140000
Note
Accessories
Note
E.12
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
70
80
Power supplies
CP SNT 48 W 48 V 1 A
FUSE
Derating curve
Technical data
Input
Input
85264 V AC / 110370 V DC
Surge protection
Output
Surge protection
Output
48 W output power
120 mVss
105 %150 % Ikonst of max. output power,
selbstttiger Wiederanlauf
Surge protection
automatic restart
Varistor tection
11 ms @ 115 V AC / 50 ms @ 230 V AC
1% trol at 10100% load
8000 F ce at output
Insulation coordination
Current (A)
2
1,5
1
0,5
0
0
10
20
30
40
50
60
70
80
Screw connection
Clamping range (rating- / min. / max.)
Length x width x height
mm2
mm
2.5 / 0.5 / 4
62.5 x 70 x 90.5
Note
Ordering data
Type
CP SNT 48W 48V 1A
Qty.
1
Order No.
8879230000
Note
Accessories
Note
E.13
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
CP SNT 70 W 24 V 3 A
Vin AC
EMC
Filter
Rectifier
Flyback
Converter
Output Recctifier
& Filter
Vout DC
Output Current
Check & Share
current control
Feedback
OVP, OTP
12
Signal Relay
11
14
Derating curve
Technical data
Input
Input
85264 V AC / 110370 V DC
Input current 40 V AC
Input frequency
2 A @ 100240 V AC
50/ 60 Hz uency
Output
Output voltage adjustable via potentiometer)
Output
2428 V DC (adjustable via potentiometer)
Output current
max. output power
3 A ut current
72 W output power
Surge protection
Mains failure bridge-over time V AC
2934 V ection
10 ms @ 115 V AC / 20 ms @ 230 V AC
General data
Ambient temperature (operational) C)
General data
-10 C+70 C (derating from 55 C)
Storage temperature
Degree of efficiency at max. load
Status indication
Standards (SELV)
EMC standards 55022, EN 55024, EN 61000-6-2, 3
EN 60950 (SELV)
EN 55011, EN 55022, EN 55024, EN 61000-6-2, 3
Weight g
Approvals s 508 / cURus 60950 / GL
0.55 kg
CE / cULus 508 / cURus 60950 / GL / GOST
4
3.5
Current (A)
3
2.5
2
1.5
1
0.5
0
0
10
20
30
Screw connection
Clamping range (rating- / min. / max.)
Length x width x height
Note
mm2
mm
2.5 / 0.13 / 4
110 x 55.5 x 125
For redundancy operation or to maintain the alert function, only
operate with diode module.
Ordering data
Type
CP SNT 70W 24V 3A
Qty.
1
40
50
60
Order No.
8708660000
Note
Accessories
Note
E.14
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
70
80
Power supplies
CP SNT 120 W 24 V 5 A
VIN AC
EMC &
Filter
Forward
Converter
Rectifier
& Filter
PWM
Controller
VOUT DC
Out Rectifier
& Filter
Photocoupler
Voltage
feedback
Photocoupler
OVP
Signal
Relay
12
11
14
Derating curve
Technical data
Input
Input
3 A @ 115 V AC / 2 A @ 230 V AC
50/ 60 Hz uency
Output
Output voltage adjustable via potentiometer)
Output
2428 V DC (adjustable via potentiometer)
Output current
max. output power
5 A ut current
120 W output power
Surge protection
Mains failure bridge-over time V AC
2934 V ection
20 ms @ 115 V AC / 20 ms @ 230 V AC
General data
Ambient temperature (operational) C)
General data
-10 C+70 C (derating from 55 C)
Storage temperature
Degree of efficiency at max. load
Status indication
Standards (SELV)
EMC standards 55022, EN 55024, EN 61000-6-2, 3
EN 60950 (SELV)
EN 55011, EN 55022, EN 55024, EN 61000-6-2, 3
Weight g
Approvals s 508 / cURus 60950 /GL
0.65 kg
CE / cULus 508 / cURus 60950 / GL / GOST
Current (A)
5
4
3
2
1
0
0
10
20
30
40
50
60
70
80
Screw connection
Clamping range (rating- / min. / max.)
Length x width x height
Note
mm2
mm
2.5 / 0.13 / 4
110 x 65.5 x 125
For redundancy operation or to maintain the alert function, only
operate with diode module.
Ordering data
Type
CP SNT 120W 24V 5A
Qty.
1
Order No.
8708670000
Note
Accessories
Note
E.15
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
CP SNT 250 W 24 V 10 A
VIN AC
EMC
Input
Rectifier
& Filter
Output
Rectifier
& Filter
Forward
Converter
VOUT DC
PWM
Control
Photocoupler
Feedback
Signal
Relay
12
11
14
Derating curve
Technical data
Input
Input
Output
Output voltage adjustable via potentiometer)
Output
2428 V DC (adjustable via potentiometer)
Output current A
max. output power
0.110 A
240 W output power
Surge protection
Mains failure bridge-over time V AC
3036 V ection
10 ms @ 115 V AC / 15 ms @ 230 V AC
General data
Ambient temperature (operational) C)
General data
-10 C+70 C (derating from 55 C)
Storage temperature
Degree of efficiency at max. load
Status indication
Standards (SELV)
EMC standards 55022, EN 55024, EN 61000-6-2, 3
EN 60950 (SELV)
EN 55011, EN 55022, EN 55024, EN 61000-6-2, 3
Weight
Approvals s 508
1.6 kg
CE / cULus 508 / cURus 60950 / GL / GOST
12
10
Current (A)
8
6
4
2
0
0
10
20
30
Screw connection
Clamping range (rating- / min. / max.)
Length x width x height
Note
mm2
mm
4 / 0.13 / 6
110 x 125.5 x 125
For redundancy operation or to maintain the alert function, only
operate with diode module.
Ordering data
Type
CP SNT 250W 24V 10A
Qty.
1
40
50
60
Order No.
8708680000
Note
Accessories
Note
E.16
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
70
80
Power supplies
CP SNT 500 W 24 V 20 A
VIN AC
EMI
Input
Rectiefier
& Filter
Forward
Converter
Output
Rectifier
& Filter
PWM
Feedback
Signal
Relay
VOUT DC
12
11
14
Derating curve
Technical data
Input
Input
9 A @ 115 V AC / 6 A @ 230 V AC
50/ 60 Hz uency
Output
Output voltage adjustable via potentiometer)
Output
2428 V DC (adjustable via potentiometer)
Surge protection
Mains failure bridge-over time V AC
3036 V ection
10 ms @ 115 V AC / 15 ms @ 230 V AC
General data
Ambient temperature (operational) C)
General data
-10 C+70 C (derating from 55 C)
Storage temperature
Degree of efficiency at max. load
Status indication
Standards (SELV)
EMC standards 55022, EN 55024, EN 61000-6-2, 3
EN 60950 (SELV)
EN 55011, EN 55022, EN 55024, EN 61000-6-2, 3
Weight
Approvals s 508 / cURus 60950 / GL
2 kg ht
CE / cULus 508 / cURus 60950 / GL / GOST
Current (A)
30
20
10
0
0
10
20
30
40
50
60
70
80
Screw connection
Clamping range (rating- / min. / max.)
Length x width x height
Note
mm2
mm
4 / 0.13 / 6
110 x 227.5 x 125
For redundancy operation or to maintain the alert function, only
operate with diode module.
Ordering data
Type
CP SNT 500W 24V 20A
Qty.
1
Order No.
8778870000
Note
Accessories
Note
E.17
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
CP SNT 1000 W 24 V 40 A
VIN AC
EMC &
Filter
Forward
Converter
Rectifier
& Filter
PWM
Controller
VOUT DC
Out Rectifier
& Filter
Photocoupler
Voltage
feedback
Photocoupler
OVP
Signal
Relay
12
11
14
Derating curve
Technical data
Input
Input
Input voltage
85264 V AC e
Output
Output voltage adjustable via potentiometer)
Output
2428 V DC (adjustable via potentiometer)
Output current
max. output power
40 A t current
960 W output power
Surge protection
Mains failure bridge-over time V AC
2934 V ection
20 ms @ 115 V AC / 20 ms @ 230 V AC
General data
Ambient temperature (operational) C)
General data
-10 C+70 C (derating from 55 C)
Storage temperature
Degree of efficiency at max. load
Status indication
Standards (SELV)
EMC standards 55022, EN 55024, EN 61000-6-2, 3
EN 60950 (SELV)
EN 55011, EN 55022, EN 55024, EN 61000-6-2, 3
Weight
Approvals n preparation
4.4 kg
CE / UL in preparation / GOST
50
40
Current (A)
30
20
10
0
0
10
20
30
Screw connection
Clamping range (rating- / min. / max.)
Length x width x height
Note
mm2
mm
4 / 0.13 / 6
125 x 240 x 150
For redundancy operation or to maintain the alert function, only
operate with diode module.
Ordering data
Type
CP SNT 1000W 24V 40A
Qty.
1
40
50
60
Order No.
8862780000
Note
Accessories
Note
E.18
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
70
80
connectPower 3-phase
ECOLINE
Power supplies
CP SNT3 120 W 24 V 5 A
VIN AC
EMC &
Filter
Forward
Converter
Rectifier
& Filter
PWM
Controller
VOUT DC
Out Rectifier
& Filter
Photocoupler
Voltage
feedback
Photocoupler
OVP
Signal
Relay
12
11
14
Derating curve
Technical data
Input
Input
3x400 V AC / 340575 V AC
Input current AC
Input frequency
0,8 A @ 400 V AC
4763 Hz ency
Output
Output voltage adjustable via potentiometer)
Output
2428 V DC (adjustable via potentiometer)
Output current
max. output power
5 A ut current
120 W output power
Surge protection
Mains failure bridge-over time
2934 V ection
> 20 ms @ 400 V AC e-over time
General data
Ambient temperature (operational) C)
General data
-10 C+70 C (derating from 55 C)
Storage temperature
Degree of efficiency at max. load
Status indication
Standards (SELV)
EMC standards 55022, EN 55024, EN 61000-6-2, 3
EN 60950 (SELV)
EN 55011, EN 55022, EN 55024, EN 61000-6-2, 3
Weight
Approvals s 508 / cURus 60950
1.5 kg
CE / cULus 508 / cURus 60950 / GOST
Current (A)
5
4
3
2
1
0
0
10
20
30
40
50
60
70
80
Screw connection
Clamping range (rating- / min. / max.)
Length x width x height
Note
mm2
mm
4 / 0.13 / 4
110 x 90 x 125
For redundancy operation or to maintain the alert function, only
operate with diode module.
Ordering data
Type
CP SNT3 120W 24V 5A
Qty.
1
Order No.
8862730000
Note
Accessories
Note
E.19
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
connectPower 3-phase
ECOLINE
CP SNT3 250 W 24 V 10 A
VOUT DC
3ph VIN AC
AC/DC
Converter
Anti Surge
Circuit
Output
Voltage
control
Output Current
Check & Control
OTP/OVP
Output
Voltage
Protection
12
Signal
Relay
11
14
Derating curve
Technical data
Input
Input
3x400 V AC / 340575 V AC
Input current V AC
Input frequency
0.95 A @ 400 V AC
4763 Hz ency
Output
Output voltage adjustable via potentiometer)
Output
2428 V DC (adjustable via potentiometer)
Output current
max. output power
10 A t current
250 V output power
Surge protection
Mains failure bridge-over time
2934 V ection
> 10 ms @ 400 V AC e-over time
General data
Ambient temperature (operational) C)
General data
-10 C+70 C (derating from 55 C)
Storage temperature
Degree of efficiency at max. load
Status indication
Standards (SELV)
EMC standards 55022, EN 55024, EN 61000-6-2, 3
EN 60950 (SELV)
EN 55011, EN 55022, EN 55024, EN 61000-6-2, 3
Weight
Approvals s 508 / cURus 60950 / GL
1.5 kg
CE / cULus 508 / cURus 60950 / GL / GOST
12
10
Current (A)
R SENSE
OCP
Output
Current
Protection
8
6
4
2
0
0
10
20
30
Screw connection
Clamping range (rating- / min. / max.)
Length x width x height
Note
mm2
mm
4 / 0.13 / 6
110 x 125.5 x 125
For redundancy operation or to maintain the alert function, only
operate with diode module.
Ordering data
Type
CP SNT3 250W 24V 10A
Qty.
1
40
50
60
Order No.
8708700000
Note
Accessories
Note
E.20
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
70
80
connectPower 3-phase
ECOLINE
Power supplies
CP SNT3 500 W 24 V 20 A
VOUT DC
3ph VIN AC
AC/DC
Converter
Anti Surge
Circuit
Output
Voltage
control
Output Current
Check & Control
R SENSE
OCP
Output
Current
Protection
OTP/OVP
Output
Voltage
Protection
12
Signal
Relay
11
14
Derating curve
Technical data
Input
Input
3x400 V AC / 340575 V AC
Input current AC
Input frequency
1.7 A @ 400 V AC
4763 Hz ency
Output
Output voltage adjustable via potentiometer)
Output
2428 V DC (adjustable via potentiometer)
Output current
max. output power
20 A t current
480 V output power
Surge protection
Mains failure bridge-over time
3034 V n
> 10 ms @ 400 V AC e-over time
General data
Ambient temperature (operational) C)
General data
-10 C+70 C (derating from 55 C)
Storage temperature
Degree of efficiency at max. load
Status indication
Standards (SELV)
EMC standards 55022, EN 55024, EN 61000-6-2, 3
EN 60950 (SELV)
EN 55011, EN 55022, EN 55024, EN 61000-6-2, 3
Weight
Approvals s 508 / cURus 60950 / GL
3 kg ht
CE / cULus 508 / cURus 60950 / GL / GOST
30
Current (A)
25
20
15
10
5
0
0
10
20
30
40
50
60
70
80
Screw connection
Clamping range (rating- / min. / max.)
Length x width x height
Note
mm2
mm
4 / 0.13 / 6
110 x 227.5 x 125
For redundancy operation or to maintain the alert function, only
operate with diode module.
Ordering data
Type
CP SNT3 500W 24V 20A
Qty.
1
Order No.
8708710000
Note
Accessories
Note
E.21
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
connectPower 3-phase
ECOLINE
CP SNT3 1000 W 24 V 40 A
VOUT DC
3ph VIN AC
AC/DC
Converter
Output
Voltage
control
Anti Surge
Circuit
Output Current
Check & Control
OTP/OVP
Output
Voltage
Protection
12
Signal
Relay
11
14
Derating curve
Technical data
Input
Input
Input current AC
Input frequency
3.4 A @ 400 V AC
4763 Hz ency
Output
Output voltage adjustable via potentiometer)
Output
2428 V DC (adjustable via potentiometer)
Output current
max. output power
40 A t current
960 V output power
Surge protection
Mains failure bridge-over time
2934 V ection
> 10 ms @ 400 V AC e-over time
General data
Ambient temperature (operational) C)
General data
-10 C+70 C (derating from 55 C)
Storage temperature
Degree of efficiency at max. load
Status indication
Standards (SELV)
EMC standards 55022, EN 55024, EN 61000-6-2, 3
EN 60950 (SELV)
EN 55011, EN 55022, EN 55024, EN 61000-6-2, 3
Weight
Approvals s 508 / cURus 60950 / GL
3.5 kg
CE / cULus 508 / cURus 60950 / GL / GOST
mm2
Screw connection
4 / 0.1 / 6
mm
mm
10 / 0.3 / 16
125 x 280 x 150
Note
50
40
Current (A)
R SENSE
OCP
Output
Current
Protection
30
20
10
0
0
10
20
30
Ordering data
Type
CP SNT3 1000W 24V 40A
Qty.
1
40
50
60
Order No.
8708730000
Note
Accessories
Note
E.22
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
70
80
CP SNT 55 W 48 V 1.04 A
Power supplies
H
W
+
L
FUSE
+
L
FUSE
Technical data
Input
Input
Input
Output
Output voltage
Output
48 V DC oltage
Output
2428 V DC e
Output current
max. output power
1.04 A current
50 V output power
2.3 A current
55 V output power
< 50 mVeff
< 50 mVeff
Status indication
Standards EN 60950, IEC950
no er factor correction
CSA;UL/UR;CE;
no er factor correction
CSA;UL/UR;CE;
Screw connection
Screw connection
4 / 0.1 / 4
131 x 57 x 98
4 / 0.1 / 4
131 x 57 x 98
mm2
mm
Ordering data
Type
CP SNT 55W 48V 1.04A
Qty.
1
Order No.
9927480048
Type
CP SNT 55W 24-28V 2.3A
Qty.
1
Order No.
9927480024
Note
Accessories
Note
E.23
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
CP SNT 55 W 5 V 3 A
CP SNT 55 W 12-15 V 3 A
H
W
+
L
FUSE
+
L
FUSE
Technical data
Input
Input
Input
Output
Output voltage
Output
1215 V DC e
Output
5 V DC voltage
Output current
max. output power
3 A ut current
36 V output power
3 A ut current
15 V output power
< 50 mVeff
< 50 mVeff
Status indication
Standards EN 60950, IEC950
no er factor correction
CSA;UL/UR;CE;
no er factor correction
CSA;UL/UR;CE;
Screw connection
Screw connection
4 / 0.1 / 4
131 x 57 x 98
4 / 0.1 / 4
131 x 57 x 98
mm2
mm
Ordering data
Type
CP SNT 55W 12-15V 3A
Qty.
1
Order No.
9927480012
Type
CP SNT 55W 5V 3A
Note
Accessories
Note
E.24
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Qty.
1
Order No.
9927480005
Input
Input
Input
Output
Output voltage
Output
48 V DC oltage
Output
2428 V DC e
Output current
max. output power
3.5 A current
168 V output power
6.5 A current
156 V output power
0,2 %eff
0,2 %eff
40 ms @ 115 V AC / 50 ms @ 230 V AC
1% trol at 10100% load
40 ms @ 115 V AC / 50 ms @ 230 V AC
1% trol at 10100% load
Status indication
Standards EN 60950, IEC950
no er factor correction
CSA;UL/UR;CE;
no er factor correction
CSA;UL/UR;CE;
Screw connection
Screw connection
4 / 0.1 / 4
175 x 57 x 127
4 / 0.1 / 4
175 x 57 x 127
Power supplies
H
W
Technical data
mm2
mm
Ordering data
Type
CP SNT 160W 48V 3.5A
Qty.
1
Order No.
9925340048
Type
CP SNT 160W 24-28V 6.5A
Qty.
1
Order No.
9925340024
Note
Accessories
Note
E.25
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
CP SNT 160 W 5 V 8 A
Input
Input
Input
Output
Output voltage
Output
1215 V DC e
Output
5 V DC voltage
Output current
max. output power
8 A ut current
96 V output power
8 A ut current
40 V output power
0,2 %eff
0,2 %eff
40 ms @ 115 V AC / 50 ms @ 230 V AC
1% trol at 10100% load
40 ms @ 115 V AC / 50 ms @ 230 V AC
1% trol at 10100% load
Status indication
Standards EN 60950, IEC950
no er factor correction
CSA;UL/UR;CE;
no er factor correction
CSA;UL/UR;CE;
Screw connection
Screw connection
4 / 0.1 / 4
175 x 57 x 127
4 / 0.1 / 4
175 x 57 x 127
H
W
Technical data
mm2
mm
Ordering data
Type
CP SNT 160W 12-15V 8A
Qty.
1
Order No.
9925340012
Type
CP SNT 160W 5V 8A
Note
Accessories
Note
E.26
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Qty.
1
Order No.
9925340005
Power supplies
H
W
Technical data
Input
Input
Output
Output voltage -28 V DC
Output
Adjustable, 22-28 V DC
Output current
max. output power
12.5 A current
300 W output power
40 ms @ 115 V AC / 40 ms @ 230 V AC C
0.2 % l at 10100% load
Monitoring function
Insulation coordination
4 kV
Status indication yellow LED / Error: red LED / On: green LED
Current limiting: yellow LED / Error: red LED / On: green LED
Approvals ;CE;
CSA;UL/UR;CE;
Screw connection
Clamping range (rating- / min. / max.)
Length x width x height
mm2
mm
4 / 0.1 / 4
101 x 240 x 155
Note
Ordering data
Type
CP SNT 300W 24V 12.5A
Qty.
1
Order No.
9916250024
Note
Accessories
Note
E.27
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
connectPower 3-phase
H
W
Technical data
Input
Input
Output
Output voltage
Output
24 V DC oltage
Output current
max. output power
2.3 A current
55 W output power
< 50 mVeff
Insulation coordination
Electrical isolation, output-earth
Insulation coordination
0.5 kV cal isolation, output-earth
General data
Ambient temperature (operational)
General data
0 C+50 C ature (operational)
Storage temperature
Degree of efficiency at max. load
Status indication
no er factor correction
CSA;UL/UR;CE;
Screw connection
Clamping range (rating- / min. / max.)
Length x width x height
Note
mm2
mm
4 / 0.1 / 4
168 x 60 x 108
Derating loss: 10% @ 85C
Ordering data
Type
CP-SNT 380-480VAC/24V
Qty.
1
Order No.
9917790324
Note
Accessories
Note
E.28
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
E.29
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
Diode modules
24 V DC / 3 A
Power supply 1
24 V DC / 10 A
Power Supply to
critical loads
(e.g. PLC, IPC)
230 V AC
-V
115 V AC
8708680000
CP SNT 250 W 24 V 10 A
\
%
Input:
PE
DC OK
max. 250 V AC / 1 A
30 V DC / 1 A
12
11
14
+V
Power supply 2
OUT
E1 E2 -V
Output:
6-10 A Char. C
Diode module
24 V DC / 10 A
Power supply 1
OUT
100 - 120 V AC
200 - 240 VAC
50 / 60 Hz
24 V DC 10 A
+V
-V
Diode module
10 A
8710620000
CP DM 10
Input: 24 V
Output: 24 V
-V
-V
-V
230 V AC
E1 E2 -V
115 V AC
115 V AC
8708680000
CP SNT 250 W 24 V 10 A
%\
E1
24 V DC / 3 A
-V
230 V AC
2x10 A
20 A
Adj.
24...26 V DC
\
%
E2
IN
6-10 A Char. C
Power Supply to
non-critical loads
PE
DC OK
max. 250 V AC / 1 A
30 V DC / 1 A
14
12
11
+V
8708680000
CP SNT 250 W 24 V 10 A
8710620000
CP DM 10
Input:
Output:
100 - 120 V AC
200 - 240 VAC
50 / 60 Hz
24 V DC 10 A
Input: 24 V
Output: 24 V
\
%
2x10 A
20 A
%\
+V
-V
-V
E1
-V
-V
Input:
Output:
6-10 A Char. C
E2
Adj.
24...26 V DC
PE
DC OK
max. 250 V AC / 1 A
30 V DC / 1 A
14
12
11
+V
100 - 120 V AC
200 - 240 VAC
50 / 60 Hz
24 V DC 10 A
+V
-V
-V
Adj.
24...26 V DC
IN
12 11 14
+V +V -V -V
Power supply 2
24 V DC / 3 A
DC OK
CP SNT 70 W 24 V 3 A
Input:
Output:
24 V DC / 10 A
8708860000
100 - 120 V AC
200 - 240 VAC
50 / 60 Hz
24 V DC 10 A
24 V DC / 10 A
Status relays (change-over contact)
e.g. to SPS, IPC
6-10 A Char. C
%\
L
PE
E.30
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Diode modules
CP DM 20
CP DM 10
Power supplies
+V
E1
-V
+V
E2 -V
E1
-V
E2 -V
Technical data
Input
Input
Input
Input voltage
40 V DC max.
40 V DC max.
2 x 010 A max.
Output
2 x 020 A max.
Output
General data
Ambient temperature (operational)
General data
-10 C+55 C ture (operational)
General data
-10 C+55 C ture (operational)
Storage temperature
Degree of efficiency at max. load
TS 35 ail compatibility
TS 35 ail compatibility
Weight
Approvals s 508 / cURus 60950
406 g
CE / cULus 508 / cURus 60950 / GOST
414 gt
CE / cULus 508 / cURus 60950 / GOST
mm2
Screw connection
4 / 0.13 / 6
Screw connection
4 / 0.13 / 6
mm
mm
4 / 0.13 / 6
110 x 55.5 x 125
10 / 0.32 / 16
110 x 55.5 x 142
Note
Ordering data
Type
CP DM 10
Qty.
1
Order No.
8710620000
Type
CP DM 20
Qty.
1
Order No.
8768650000
Note
Accessories
Note
E.31
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
DC/DC converters
DC/DC converters
DC/DC converters are particularly suitable for decentralised
power supplies to circuitry, subassemblies and modules.
DC/DC converters are often required in emergency power
supplies supplying electrical devices from batteries and other
DC systems.
DC/DC converters
+
Input 24 V DC
Long cables and
extreme disruptive
environments mean that
the voltage supply is
flawed by harmonic
waves and voltage
drops.
+
PWM
24 V DC
DC/DC converters
+
+
PWM
12 V DC
E.32
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
Load circuit 1
For the reliable
power supply
to controllers
www.barr-thorp.com
Load circuit 2
For transforming
the DC input voltage
and supplying
12 V DC units
Power supplies
DC/DC converters
Chopper
Transformer
Rectifier
and filtering
E.33
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
DC/DC converters
connectPower
CP DCDC 50 W 22-24 V DC 2 A
CP DCDC 50 W 15 V DC 3 A
H
W
Chopper
Transformer
Rectifier and
filtering
Chopper
Transformer
Rectifier and
filtering
Technical data
Input
Input
Input
Input fuse
Output
internal e
Output
internal e
Output
Output voltage
Output current
2224 V DC e
2 A ut current
15 V DC oltage
3 A ut current
Status indication
Switching frequency
Approvals UR / CE
Screw connection
Screw connection
4 / 0.1 / 4
131 x 57 x 98
4 / 0.1 / 4
131 x 57 x 98
mm2
mm
Note
Ordering data
Connection system
Screw connection
Type
CP DCDC 50W 22-24V 2A
Qty.
1
Order No.
9919372424
Type
CP DCDC 50W 15V 3A
Note
Accessories
Note
E.34
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Qty.
1
Order No.
9919372415
DC/DC converters
CP DCDC 50 W 5 V DC 8 A
CP DCDC 50 W 12 V DC 3 A
Power supplies
connectPower
H
W
Chopper
Transformer
Rectifier and
filtering
Chopper
Transformer
Rectifier and
filtering
Technical data
Input
Input
Input
Input fuse
Output
internal e
Output
internal e
Output
Output voltage
Output current
12 V DC oltage
3 A ut current
5 V DC voltage
8 A ut current
Status indication
Switching frequency
Approvals UR / CE
Screw connection
Screw connection
4 / 0.1 / 4
131 x 57 x 98
4 / 0.1 / 4
131 x 57 x 98
mm2
mm
Note
Ordering data
Connection system
Screw connection
Type
CP DCDC 50W 12V 3A
Qty.
1
Order No.
9919371212
Type
CP DCDC 50W 5V 8A
Qty.
1
Order No.
9919371205
Note
Accessories
Note
E.35
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
DC/DC converters
connectPower
CP DCDC 50 W 22-24 V DC 2 A
CP DCDC 50 W 15 V DC 3 A
H
W
Chopper
Transformer
Rectifier and
filtering
Chopper
Transformer
Rectifier and
filtering
Technical data
Input
Input
Input
Input fuse
Output
internal e
Output
internal e
Output
Output voltage
Output current
2224 V DC e
2 A ut current
15 V DC oltage
3 A ut current
Status indication
Switching frequency
Approvals UR / CE
Screw connection
Screw connection
4 / 0.1 / 4
131 x 57 x 98
4 / 0.1 / 4
131 x 57 x 98
mm2
mm
Note
Ordering data
Connection system
Screw connection
Type
CP DCDC 50W 22-24V 2A
Qty.
1
Order No.
9919371224
Type
CP DCDC 50W 15V 3A
Note
Accessories
Note
E.36
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Qty.
1
Order No.
9919371215
DC/DC converters
CP DCDC 50 W 5 V DC 8 A
CP DCDC 50 W 12 V DC 3 A
Power supplies
connectPower
H
W
Chopper
Transformer
Rectifier and
filtering
Chopper
Transformer
Rectifier and
filtering
Technical data
Input
Input
Input
Input fuse
Output
internal e
Output
internal e
Output
Output voltage
Output current
12 V DC oltage
3 A ut current
5 V DC voltage
8 A ut current
Status indication
Switching frequency
Approvals UR / CE
Screw connection
Screw connection
4 / 0.1 / 4
131 x 57 x 98
4 / 0.1 / 4
131 x 57 x 98
mm2
mm
Note
Ordering data
Connection system
Screw connection
Type
CP DCDC 50W 12V 3A
Qty.
1
Order No.
9919372412
Type
CP DCDC 50W 5V 8A
Qty.
1
Order No.
9919372405
Note
Accessories
Note
E.37
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
INPUT
+15 V
0V
15 V
OUTPUT
230 V
400 V
PE
+
+
24V DC
E.38
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
No humming
Moisture cannot ingress into the windings
Windings mechanically secured
Improved heat dissipation from the windings
Good heat dissipation
Easy mounting
Keyhole assembly simplifies mounting and saves time. A
snap-on fixing attachment for 35 mm DIN rails is available as
an accessory for single-phase devices up to 144 W.
Simply plugged into the device and secured with two screws,
it ensures easiest possible mounting!
OUTPUT
INPUT
+5% 400 V 5% +5% 400 V 5% +5% 400 V 5%
3x
+
+
130
24V DC
PE
INPUT
+5% 400 V 5% +5% 400 V 5% +5% 400 V 5%
OUTPUT
3x
+
+
130
PE
24V DC
0V
Fail
E.39
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
compactPower
single phase
CP NT 72
CP NT 36
INPUT
+15V
0V
-15V
230V
400V
PE
CP NT 144
OUTPUT
+
+
24VDC
INPUT
+15V
0V
-15V
230V
400V
PE
OUTPUT
+
+
24VDC
INPUT
+15V
0V
-15V
230V
400V
PE
OUTPUT
+
+
24VDC
Technical data
Input
Input
Input
Input
Input voltage 15 V
230 V/ 400 V 15 V
230 V/ 400 V 15 V
230 V/ 400 V 15 V
Input current A
Input frequency
0.35 A/ 0.2 A
50/ 60 Hz uency
0.56 A/ 0.32 A
50/ 60 Hz uency
0.95 A/ 0.55 A
50/ 60 Hz uency
13 A / 0.08 A current
1 A / 0.63 A time lag ion
Output
Output voltage
Output
24 V SELV tage
Output
24 V SELV tage
Output
24 V SELV tage
36 W output power
72 W output power
Protective circuit
Insulation coordination
varistor e circuit
Insulation coordination
varistor e circuit
Insulation coordination
varistor e circuit
Insulation coordination
to BGV A3 ck protection
4 kV ation strength
to BGV A3 ck protection
4 kV ation strength
to BGV A3 ck protection
4 kV ation strength
Insulation class
Protection class
B sulation class
IP 20 tion class
B sulation class
IP 20 tion class
B sulation class
IP 20 tion class
pollution severity
1 llution severity
1 llution severity
1 llution severity
General data
Ambient temperature (operational)
General data
-20 C+55 C ure (operational)
General data
-20 C+55 C ure (operational)
General data
-20 C+55 C ure (operational)
Storage temperature
Degree of efficiency at max. load
1A @ 55 C; 1.5A @ 40 C /1 A @ 40 C C
green LED ication
2.5A @ 55 C; 3A @ 40 C /2.5 A @ 40 C
green LED ication
5A @ 55 C; 6A @ 40 C /5 A @ 40 C C
green LED ication
Weight
1.5 kg
2.1 kg
3.1 kg
EMC standards 2, -3
Approvals cULus
EN 61000-6 /-2, -3
CE;cURus;cULus
EN 61000-6 /-2, -3
CE;cURus;cULus
EN 61000-6 /-2, -3
CE;cURus;cULus
Screw connection
2.5 / 0.13 / 2.5
Screw connection
2.5 / 0.13 / 2.5
Screw connection
2.5 / 0.13 / 2.5
2.5 / 0.5 / 4
2.5 / 0.5 / 4
2.5 / 0.5 / 4
68 x 78 x 123
85 x 84 x 125
92 x 96 x 135
Ordering data
Type
(Qty.=1)
CP NT 36W 24V 1.5A
Order No.
8575260000
Type
(Qty.=1)
CP NT 72W 24V 3A
Order No.
8575270000
Type
(Qty.=1)
CP NT 144W 24V 6A
Note
Accessories
Note
E.40
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Order No.
8575280000
CP NT 264
CP NT 192
CP NT 432
Power supplies
compactPower
single phase
INPUT
+15V
0V
-15V
230V
400V
PE
OUTPUT
+
+
24VDC
INPUT
+15V
0V
-15V
230V
400V
PE
OUTPUT
+
+
24VDC
INPUT
+15V
0V
-15V
230V
400V
PE
OUTPUT
+
+
24VDC
Technical data
Input
Input
Input
Input
Input voltage 15 V
230 V/ 400 V 15 V
230 V/ 400 V 15 V
230 V/ 400 V 15 V
Input current
Input frequency
1.3 A/ 0.7 A
50/ 60 Hz uency
1.8 A/ 1 A nt
50/ 60 Hz uency
2.5 A/ 1.3 A
50/ 60 Hz uency
3 A / 0.16 A current
2.0 A / 1.25 A time lag
5 A / 0.28 A current
3.15 A / 1.6 A time lag
54 A / 0.31 A current
4.0 A / 2.0 A time lag
Output
Output voltage
Output
24 V SELV tage
Output
24 V SELV tage
Output
24 V SELV tage
11 A ut current at 40C
10 A ut current at 55C
18 A ut current at 40C
15 A ut current at 55C
Protective circuit
Insulation coordination
varistor e circuit
Insulation coordination
varistor e circuit
Insulation coordination
varistor e circuit
Insulation coordination
to BGV A3 ck protection
4 kV ation strength
to BGV A3 ck protection
4 kV ation strength
to BGV A3 ck protection
4 kV ation strength
Insulation class
Protection class
B sulation class
IP 20 tion class
B sulation class
IP 20 tion class
B sulation class
IP 20 tion class
pollution severity
1 llution severity
1 llution severity
1 llution severity
General data
Ambient temperature (operational)
General data
-20 C+55 C ure (operational)
General data
-20 C+55 C ure (operational)
General data
-20 C+55 C ure (operational)
Storage temperature
Degree of efficiency at max. load
7A @ 55 C; 8A @ 40 C /7 A @ 40 C C
green LED ication
Weight
4.3 kg
6.1 kg
9.1 kg
EMC standards 2, -3
Approvals cULus
EN 61000-6 /-2, -3
CE;cURus;cULus
EN 61000-6 /-2, -3
CE;cURus;cULus
EN 61000-6 /-2, -3
CE;cURus;cULus
Screw connection
2.5 / 0.13 / 2.5
Screw connection
2.5 / 0.13 / 2.5
Screw connection
2.5 / 0.13 / 2.5
2.5 / 0.5 / 4
2.5 / 0.5 / 4
2.5 / 0.5 / 4
Ordering data
Type
(Qty.=1)
CP NT 192W 24V 8A
Order No.
8575300000
Type
(Qty.=1)
CP NT 264W 24V 11A
Order No.
8575310000
Type
(Qty.=1)
CP NT 432W 24V 18A
Order No.
8575320000
Note
Accessories
Note
E.41
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
compactPower 3-phase
CP NT3 400
CP NT3 250
CP NT3 500
OUTPUT
INPUT
+5% 400V -5% +5% 400V -5% +5% 400V -5%
3x
3x
3x
+
+
130
24VDC
PE
OUTPUT
INPUT
+
+
130
24VDC
OUTPUT
INPUT
+
+
130
PE
24VDC
PE
Technical data
Input
Input
Input
Input
3 x 400 V 5 %
3 x 400 V 5 %
3 x 400 V 5 %
Input current
Input frequency
0.5 A current
50/ 60 Hz quency
0.75 A urrent
50/ 60 Hz quency
0.9 A current
50/ 60 Hz quency
Output voltage
Output current at 40C/60C
24 V SELV tage
11 A/10 A rrent at 40C/60C
24 V SELV tage
18 A/16 A rrent at 40C/60C
24 V SELV tage
22 A/20 A rrent at 40C/60C
Protective circuit
Insulation coordination
varistor e circuit
Insulation coordination
varistor e circuit
Insulation coordination
varistor e circuit
Insulation coordination
to BGV A3 ck protection
4 kV ation strength
to BGV A3 ck protection
4 kV ation strength
to BGV A3 ck protection
4 kV ation strength
Insulation class
Protection class
B sulation class
IP 20 tion class
B sulation class
IP 20 tion class
B sulation class
IP 20 tion class
pollution severity
1 llution severity
1 llution severity
1 llution severity
General data
Ambient temperature (operational)
General data
-20 C+60 C ture (operational)
General data
-20 C+60 C ture (operational)
General data
-20 C+60 C ture (operational)
Storage temperature
Degree of efficiency at max. load
11 A @ 40 C /10 A @ 60 C l/vertical
no integral fan
18 A @ 40 C /16 A @ 60 C l/vertical
no integral fan
22 A @ 40 C /20 A @ 60 C l/vertical
no integral fan
Status indication
Weight
Standards EN 61558-2-4, -6, 72/23/EWG
4.7 kg
EN 60950, EN 61558-2-4, -6, 72/23/EWG
6.9 kg
EN 60950, EN 61558-2-4, -6, 72/23/EWG
10 kg t
EN 60950, EN 61558-2-4, -6, 72/23/EWG
EMC standards 2, -3
DIN Rail compatibility
EN 61000-6 /-2, -3
Direct mounting bility
EN 61000-6 /-2, -3
Direct mounting bility
EN 61000-6 /-2, -3
Direct mounting bility
Approvals cCSAus;cULus
CE;cURus;cCSAus;cULus
CE;cURus;cCSAus;cULus
CE;cURus;cCSAus;cULus
Screw connection
2.5 / 0.5 / 2.5
Screw connection
2.5 / 0.5 / 2.5
Screw connection
2.5 / 0.5 / 2.5
6 / 0.5 / 6
6 / 0.5 / 6
6 / 0.5 / 6
185 x 84 x 192
220 x 88 x 213
Note
Ordering data
Type
(Qty.=1)
CP NT3 250W 24V 10A
Order No.
8628620000
Type
(Qty.=1)
CP NT3 400W 24V 15A
Order No.
8628630000
Type
(Qty.=1)
CP NT3 500W 24V 20A
Note
Accessories
Note
E.42
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Order No.
8628650000
CP NT3 750
CP NT3 600
CP NT3 1000
Power supplies
compactPower 3-phase
OUTPUT
INPUT
+5% 400V -5% +5% 400V -5% +5% 400V -5%
3x
3x
PE
0V
Fail
3x
+
+
130
24VDC
OUTPUT
INPUT
+
+
130
24VDC
OUTPUT
INPUT
+
+
130
PE
PE
24VDC
0V
Fail
0V
Fail
Technical data
Input
Input
Input
Input
3 x 400 V 5 %
3 x 400 V 5 %
3 x 400 V 5 %
Input current
Input frequency
1.2 A current
50/ 60 Hz quency
1.4 A current
50/ 60 Hz quency
1.8 A current
50/ 60 Hz quency
3 x 2 A time lag on
Output
Output voltage
Output current at 40C/60C
24 V SELV tage
26 A/25 A rrent at 40C/60C
24 V SELV tage
32 A/30 A rrent at 40C/60C
24 V SELV tage
42 A/40 A rrent at 40C/60C
Protective circuit
Insulation coordination
varistor e circuit
Insulation coordination
varistor e circuit
Insulation coordination
varistor e circuit
Insulation coordination
to BGV A3 ck protection
4 kV ation strength
to BGV A3 ck protection
4 kV ation strength
to BGV A3 ck protection
4 kV ation strength
Insulation class
Protection class
B sulation class
IP 20 tion class
B sulation class
IP 20 tion class
B sulation class
IP 20 tion class
pollution severity
1 llution severity
1 llution severity
1 llution severity
General data
Ambient temperature (operational)
General data
-20 C+60 C ture (operational)
General data
-20 C+60 C ture (operational)
General data
-20 C+60 C ture (operational)
Storage temperature
Degree of efficiency at max. load
26 A @ 40 C /25 A @ 60 C l/vertical
Open collector <30 V/ <5 mA during fault
32 A @ 40 C /30 A @ 60 C l/vertical
Open collector <30 V/ <5 mA during fault
42 A @ 40 C /40 A @ 60 C l/vertical
Open collector <30 V/ <5 mA during fault
Status indication
Weight
Standards EN 61558-2-4, -6, 72/23/EWG
11 kg t
EN 60950, EN 61558-2-4, -6, 72/23/EWG
14 kg t
EN 60950, EN 61558-2-4, -6, 72/23/EWG
18 kg t
EN 60950, EN 61558-2-4, -6, 72/23/EWG
EMC standards 2, -3
DIN Rail compatibility
EN 61000-6 /-2, -3
Direct mounting biity
EN 61000-6 /-2, -3
Direct mounting blity
EN 61000-6 /-2, -3
Direct mounting ility
Approvals cCSAus;cULus
CE;cURus;cCSAus;cULus
CE;cURus;cCSAus;cULus
CE;cURus;cCSAus;cULus
Screw connection
2.5 / 0.5 / 2.5
Screw connection
2.5 / 0.5 / 2.5
Screw connection
2.5 / 0.5 / 2.5
6 / 0.5 / 6
6 / 0.5 / 6
10 / 0.5 / 10
Note
Ordering data
Type
(Qty.=1)
CP NT3 600W 24V 25A
Order No.
8628660000
Type
(Qty.=1)
CP NT3 750W 24V 30A
Order No.
8628670000
Type
(Qty.=1)
CP NT3 1000W 24V 40A
Order No.
8628680000
Note
Accessories
Note
E.43
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
When the power supply fails, UPS control units take over the
12/24 V DC power supplies to the installation within seconds,
and guarantee plant availability for a defined length of time.
Professional signalling guarantees that all relevant signal
statuses can be evaluated on the spot. Critical statuses can
also be immediately redirected to a higher-level controller.
Power supply
230 V AC
115 V AC
8708680000
CP SNT 250 W 24 V 10 A
\
%
Input:
Output:
6-10 A Char. C
PE
DC OK
max. 250 V AC / 1 A
30 V DC / 1 A
14
12
11
100 - 120 V AC
200 - 240 VAC
50 / 60 Hz
24 V DC 10 A
+V
+V
-V
Accumulator
Battery
control unit
-V
Adj.
24...26 V DC
Status relays
(change-over
contact)
+
PEPS
NPS
LPS
115/230 V AC
50/60 Hz
L
N
PE
+
-
Alarm contact
E.44
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
CP-BBU 115-230 V AC / 12 V DC
CP-BBU 115-230 V AC / 24 V DC
Power supplies
connectPower
H
W
NgL
P/S
+-
2
Loads
NgL
+-
115/230V
50/60Hz
P/S
+-
2
Loads
+-
115/230V
50/60Hz
Technical data
Input
Input
Input
Surge protection
Output
Varistor otection
Output
Varistor otection
Output
Output voltage
Output current x 9.2 A for power supply
12 V DC oltage
max. 15 A / max 9.2 A for power supply
24 V DC oltage
max. 15 A / max 9.0 A for power supply
General data
Ambient temperature (operational)
General data
-20 C+50 C ure (operational)
General data
-20 C+50 C ure (operational)
Storage temperature
Status indication harge): Battery voltage > 14.75 Vdc
Approvals ;CE;
CSA;UL/UR;CE;
CSA;UL/UR;CE;
Screw connection
Screw connection
4 / 0.1 / 4
161 x 72.5 x 127.5
4 / 0.1 / 4
161 x 72.5 x 127.5
Dimensions
Clamping range (rating- / min. / max.)
Length x width x height
mm2
mm
Note
Ordering data
Connection system
Screw connection
Type
CP-BBU 115-230VAC / 12VDC
Qty.
1
Order No.
9916280012
Type
CP-BBU 115-230VAC / 24VDC
Qty.
1
Order No.
9916280024
Note
Accessories
Note
E.45
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
0V
(1)
(9)
gn
Resetting
Besides the manual reset, it is also possible to perform a remote
reset after the error is remedied. A reset contact can be connected to a voltage pulse and the load circuit is then re-enabled
when the pulse edge falls. Note: A cyclical auto-reset is not
permitted.
Signalling / display
The triggering of an electronic fuse is indicated on an LED
directly at the device. Remote display is also possible by means
of a voltage-free NC contact. This speeds up troubleshooting
procedures and reduces outage times and repair costs.
OUTPUT
24V
fail
rt
(7)
(2)
(3)
NC contact
50Vuc /0,05A
E.46
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
INPUT (8)
24 V
Reset
0V
(1)
24 V DC 3.15 A
24 V DC 1.6 A
(9)
gn
OUTPUT
24 V
fail
rt
(2)
(3)
(7)
NC contact
50 Vuc /0.05 A
Current
(A)
Current
(A)
20
18
16
14
12
10
8
6
4
2
0
24
22
20
18
16
14
12
10
8
6
4
2
0
T i m e ( ms)
0
20
40
60
80
100
120
140
Power supplies
WAVEGUARD
T i m e ( ms)
0 10 15 20 25 30 35 40 45 50 55 60 65 70
160
Technical data
Input
Input
Input
Rated voltage
24 V DC ltage
24 V DC ltage
Rated current
Reset > 100 ms +24 V, falling edge ON
1.6 A current
Pulse > 100 ms +24 V, falling edge ON
3.15 A urrent
Pulse > 100 ms +24 V, falling edge ON
Output
Status relay / Change-over contact oltage only!
Output
NCC, max. 50 V / 0.05 A; for low voltage only!
Output
NCC, max. 50 V / 0.05 A; for low voltage only!
Signalling delay
General data
3.5 ms typically
General data
3.5 ms typically
General data
Standards
EMC standards 2, 4; EN 55011
EN 50178
EN 61000-6-1, 2, 4; EN 55011
EN 50178
EN 61000-6-1, 2, 4; EN 55011
Dimensions
Clamping range (rating- / min. / max.)
Length x width x height
mm2
mm
Note
Screw connection
Screw connection
Screw connection
Type
WGS 24Vdc 1.6A
Qty.
1
Order No.
8618890000
Type
WGS 24Vdc 3.15A
Qty.
1
Order No.
8618910000
8621040000
8621030000
Ordering data
Connection system
Note
Accessories
Note
E.47
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
WAVEGUARD
INPUT (8)
24 V
Reset
0V
(1)
(9)
gn
26
24
22
20
18
16
14
12
10
8
6
4
24 V
fail
rt
(2)
(3)
(7)
Current
(A )
Current
(A )
OUTPUT
NC contact
50 Vuc /0.05 A
65
60
55
50
45
40
35
30
25
20
15
10
5
Time (ms)
0
24 V DC 8 A
24 V DC 6.3 A
10
Time (ms)
0
15 20 25 30 35 40 45 50 55 60
10
15
20
25
30
35
40
45
50
Technical data
Input
Input
Input
Rated voltage
24 V DC ltage
24 V DC ltage
Rated current
Reset > 100 ms +24 V, falling edge ON
6.3 A current
Pulse > 100 ms +24 V, falling edge ON
8 A d current
Pulse > 100 ms +24 V, falling edge ON
Output
Status relay / Change-over contact oltage only!
Output
NCC, max. 50 V / 0.05 A; for low voltage only!
Output
NCC, max. 50 V / 0.05 A; for low voltage only!
Signalling delay
General data
3.5 ms typically
General data
3.5 ms typically
General data
Standards
EMC standards 2, 4; EN 55011
EN 50178
EN 61000-6-1, 2, 4; EN 55011
EN 50178
EN 61000-6-1, 2, 4; EN 55011
Dimensions
Clamping range (rating- / min. / max.)
Length x width x height
mm2
mm
Note
Screw connection
Screw connection
Screw connection
Type
WGS 24Vdc 6.3A
Qty.
1
Order No.
8618930000
Type
WGS 24Vdc 8.0A
Qty.
1
Order No.
8618940000
8621020000
8621010000
Ordering data
Connection system
Note
Accessories
Note
E.48
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
WAVEGUARD
Power supplies
24 V DC 0.55 A
INPUT (8)
24 V
Reset
0V
(1)
(9)
gn
OUTPUT
24 V
fail
rt
(2)
(3)
(7)
NC contact
50 Vuc /0.05 A
Derating curve
Technical data
Input
Input
Rated voltage
24 V DC ltage
0.55 A adjustable
Pulse > 100 ms +24 V, falling edge ON
Output
Status relay / Change-over contact oltage only!
Output
NCC, max. 50 V / 0.05 A; for low voltage only!
Signalling delay
General data
3.5 ms typically
General data
Standards
EMC standards 2, 4; EN 55011
EN 50178
EN 61000-6-1, 2, 4; EN 55011
Time (ms)
0
20
40
60
80
100
120
140
60
80
100
120
140
Dimensions
Clamping range (rating- / min. / max.)
Length x width x height
mm2
mm
Note
Screw connection
Time (ms)
0
20
40
Ordering data
Connection system
Screw connection
Type
WGS 24Vdc 0.55A
Qty.
1
Order No.
8710270000
8727630000
Note
Accessories
Note
E.49
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Power supplies
Schuko TS35
Schuko
Schuko TS35
Technical data
Nominal voltage
Rated cross-section
Tightening torque
1.5 ed cross-section
1.3 Nm ing torque
Pollution severity
Protection class
2 ollution severity
IP 20 ction class
Approvals
VDE; CE s
Dimensions
Clamping range (rating- / min. / max.)
Length x width x height
mm2
mm
1.5 / 1 / 1.5
60 x 76 x 45
Note
Ordering data
Connection system
Type
Schuko TS35
Qty.
10
Order No.
8734580000
Note
Accessories
Note
E.50
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com