Exam No.
M. Jinesh Jose
12044311043
Patel Anand D
12044311064
Patel Ashish P
12044311071
Patel Chirag M
12044311077
Patel Kinjal P
12044311101
Patel Krushnkant B
12044311104
(December,2013)
This is to certify that the contents of this report entitled Indian Tyre industry by (Anand
Patel(12044311064),AshishPatel(12044311071),ChiragPatel(12044311077),Krushnkant(120443
11104),Kinjal Patel(12044311101) M.Jinesh Jose(12044311043)) submitted to V. M. Patel
Institute of Management for the Award of Master of Business Administration (MBA Semester III) is original research work carried out by him/her/them under my supervision.
This report has not been submitted either partly or fully to any other University or Institute for
award of any degree or diploma.
Date :
Place : Kherva
CANDIDATES STATEMENT
I/We hereby declare that the work incorporated in this report entitled Indian Tyre industry in
partial fulfillment of the requirements for the award of Master of Business Administration
(Semester - III ) is the outcome of original study undertaken by me/us and it has not been
submitted earlier to any other University or Institution for the award of any Degree or Diploma.
------------------
Ashish Patel
------------------
Chirag Patel
------------------
Date :
Kinjal Patel
-------------------
M.Jinesh Jose
------------------
Place : Kherva
ii
PREFACE
Theories are important for understanding any subject or fields. But learning of various aspects is much
more effective to understanding any subject as a whole. The basic aim of the project report is to help the
students for developing their analytical abilities and different thoughts at different angles of the
situation. The Management Research Project is being very helpful to the students of MBA for enhancing
themes managerial capabilities and skills.
Due to the growth of Automobile industry and aggressive policy of Government for the Infrastructure
developments Tyre Industry enjoying good amount of growth rate. This Management Research Project
is much more emphasizing on the basics of the Tyre Industry. We also focus on understanding the
current scenario and competitiveness in the Industry by applying some models.
It is sincere and humble effort to understand the structure of the Indian Tyre industry along with the
Tyre Manufacturing Companies. This report is prepared by using the secondary data and this data has
been gathered by using various sources like Internet, Newspapers. Suggestions regarding report and the
project work will really add a learning value.
iii
ACKNOWLEDGEMENT
We would like to express our deep feeling of gratitude to the mentioned officials for their
assistance, guidance and inspiration before and throughout the work.
We give our special thanks to respected Dr. Mahendra Sharma, Professor & Head, V.M. Patel
Institute of Management, Ganpat University for providing us an opportunity to carry out topic to
study on Indian Tyre industry.
We would like to thank Prof. Harsha Jariwala and Prof. Abhishek Parikh, Asst. faculty member
of V.M. Patel Institute of Management, for their continuous guidance and support throughout the
industrial study.
We would like to give vote of thanks to all the faculty members and library and computer lab
support provided by V.M. Patel Institute of Management.
We are very thankful to them for their help and advice throughout our project. Their gentleness,
availability and readiness to provide all the type of guidance, for understanding the technical
things made this project successfully completed well within the timeframe.
iv
EXECUTIVE SUMMARY
Indian Tyre Industry has grown rapidly in last decades. Today it is about Rs. 9000 crore industry. The
fortune of the tyre industry depends on the agricultural and industrial performance of the economy, the
transportation needs and the production of vehicles. The size of Indian tyre industry is estimated at
about Rs.14250 crore comprising 43 players with an aggregate installed capacity of over 655 lacks tyre.
The 10 large tyre companies account for over 95% of the total production.
The Indian tyre industry has witnessed a CAGR of 7.7 per cent over the last decade. The demand and
growth for the tyre industry depends on primary factors like overall GDP growth, agricultural as well as
industrial production and growth in vehicle-demand. It also depends on the on secondary factors like
infrastructure development and prevailing interest rates.
The Indian tyre industry is two tiered; Tier-I players (top 5 tyre companies), account for over 80% of
industry turnover and have a well diversified product-mix and presence in all three major segments, i.e.,
replacement market, original equipment manufacturers (OEM's) and exports. Tier-II companies are
small in size, mainly concentrating on production of small tyres (for two/ three-wheelers, etc.), tubes &
flaps and the replacement market. Tyre industry is highly raw-material intensive, with raw material
costs accounting for 70 per cent of the cost of production.
The export market for India has been predominantly to the USA that accounts for nearly 30% of exports
from the country. Apart from that India exporting tyre in more than 50 countries.
The main threat to the industry is the price of its raw materials, most of which are petroleum byproducts. Carbon, synthetic rubber and nylon tyre cord are offshoots of petrochemicals. Thus, the future
of the industry will swing with the supply of crude oil.
In the domestic market, tyre manufacturers are expected to increasingly focus on expanding their
dealership networks & explore possibilities of tie-ups among themselves to penetrate the growing
customer base. They are also likely to pursue innovative measures (such as "dial-a-tyre service and road
shows) to improve customer awareness.
Overall Indian Tyre Industry is enjoying the fruits of more sales in the replacement market when the
input cost is comparatively lower. Since the commercial vehicles replace tyres twice a year, we have
received the full impact of the price rises affected during the first and second quarter of the last year.
vi
LIST OF TABLES
Table
Particulars
Page no.
no.
3.1
23
3.2
25
Materials
3.3
26
Natural Rubber
3.4
38
3.5
51
3.6
55
3.7
Political factors
58
3.8
Oem partners
65
4.1
71
4.2
73
4.3
76
industry
4.4
79
4.5
81
4.6
83
4.7
85
4.8
87
4.9
88
4.10
90
4.11
92
4.12
93
4.13
95
4.14
96
5.1
Salary structure
102
5.2
Financial aspect
108
5.3
110
vii
5.4
112
5.5
114
viii
LIST OF GRAPHS
Graph No.
Particulars
Page no.
3.1
30
3.2
34
3.3
47
3.4
55
3.5
64
3.6
65
4.1
74
4.2
75
4.3
76
4.4
80
4.5
82
4.6
83
4.7
85
4.8
87
4.9
89
4.10
91
4.11
92
4.12
94
4.13
95
4.14
97
ix
Sr.no
Topics
Certificate by the guide
Candidates statement
ii
Preface
iii
Acknowledgement
iv
Executive summary
List of tables
vii
List of graphs
ix
Industry profile
1.1
Introduction
1.2
1.3
Market profile
1.4
Industry segments
1.5
Sector specifics
1.6
Sector trends
1.7
History
1.8
2.0
11
2.1
Mrf
12
12
2.2.1
History
13
2.3
Jk industries
13
Ceat
14
2.4.1
History
15
2.4.2
Current scenario
15
2.4.3
OEM partnets
16
2.5
Good year
16
2.6
17
Macro analysis
19
3.0
Current scenario
20
3.1
Sector trends
20
3.2
Pricing scenario
20
3.3
Exim policy
21
3.4
Government policy
21
Pg.no
2.2
2.4
3.5
Imports of tyres
21
3.6
22
Raw materials
23
3.8
Natural rubber
23
3.9
Synthetic rubber
24
3.10
Carbon black
24
3.11
25
3.12
Rubber consumpation
25
3.13
Classification of demand
29
Demand determinants
31
3.14.1
31
3.14.2
32
3.14.3
32
3.14.4
32
3.14.5
Retreading
32
3.14.6
Radicalization
33
3.14.7
33
33
3.15.1
Rubber prices
34
3.15.2
36
3.15.3
36
3.16
Distribution scenario
37
3.17
Replacement market
37
3.17.1
OEM
37
3.17.2
Stu
37
3.17.3
Government
37
3.17.4
Import
37
38
38
3.19
39
3.20
Swot analysis
41
Strengths
41
3.7
3.14
3.15
3.18
3.18.1
3.20.1
3.20.2
Weakness
41
3.20.3
Opportunities
42
3.20.4
Threats
43
3.20.5
43
3.20.6
45
3.20.7
48
3.20.8
48
Threat of substitute
49
3.21.1
49
3.21.2
Industry rivalry
49
3.21.3
50
3.22
53
3.23
Pest analysis
57
3.23.1
Political factors
58
3.23.2
59
3.23.3
Trade policy
59
3.23.4
Dumping
60
3.23.5
60
3.23.6
Social factors
61
3.23.7
Technological factors
61
3.23.8
Technology leader
61
Leaders in industry
64
3.24.1
66
3.24.2
66
4.0
Introduction
70
4.1
73
4.2
Ratio analysis
78
Business Plan
98
5.0
Executive Summary
99
5.1
100
5.2
Nature Of Business
102
5.3
Vision
102
5.4
Mission
102
5.5
102
3.21
3.24
5.6
103
5.7
105
5.8
Production Planning
105
5.9
106
5.10
Customer Identification
106
Conclusion
116
118
Bibliography
120
CHAPTER 1
INDUSTRY PROFILE
1.1 INTRODUCTION
In Indian tyre industry, capacities are concentrated in the hands of a few large players with top
four tyrecompanies accounting for over 77 per cent of industry market share. The industry is
raw material intensive with raw material constituting over 63 per cent of the sales turnover and
72 per cent of production cost, of which rubber accounts for the major share of the material cost.
The main inputs natural rubber smoked sheets and Technically Specified Natural Rubber
(TSNR) account for 43 per cent of raw material cost of tyres.
The major demand comes from the replacement market accounting for around 55 per cent. It is
followed by 29.80 per cent from the Original Equipment Manufacturers (OEM) and 25.2 percent
from the exports. In the past the replacement demand has been the major growth driver of the
industry. But the sustained GDP growth of more than 8.6 per cent has also increased the demand
for the OEMs. The strong Compound Annual Growth Rate (CAGR) of 16 per cent during the
2009-2010 period, in the automobile sales gives a clear indication of the same and has kept the
both OEM and replacement demand buoyant. The Indian tyre industry has witnessed a CAGR of
7.7 per cent over the last decade.
The demand and growth for the tyre industry depends on primary factors like overall GDP
growth, agricultural as well as industrial production and growth in vehicle-demand. It also
depends on the on secondary factors like infrastructure development and prevailing interest
rates. In India the primary factors have sustained in the last three years helping the sector to
emerge as a winner. Even the secondary factors have helped a lot; the only concerns
are raising interest rates on the automobile segment and increased rubber prices.
The size of Indian Tyre industry is estimated at about Rs.25000 crore, comprising 43 players
with an aggregate installed capacity of over 971 lakh tyres. The 10 large tyre companies account
for over 95 per cent of the total production.
On the positive side, it is estimated that there would be a volume growth of 12-14 per cent in
2009-10. The performance of the tyre industry is linked to the automobile and infrastructure
sectors, the growth of which is dependent on the performance of the economy. The current
estimated economic growth is over 8.6 percent. The continuous thrust being placed by
the Government
on
While the tyre industry is mainly dominated by the organized sector, the unorganized sector
holds sway in bicycle tyres. The major players in the organized tyre segment consist of MRF
,Apollo Tyres, Ceat and JK Industries, which account for 77 per cent of the organized tyre
market. The other key players include Modi Rubber, Kesoram Industries and Goodyear India,
with 11 percent,7 per cent and 3 percent share respectively. Dunlop, Falcon, Tyre Corporation of
India Limited (TCIL), TVS-Srichakra, Metro Tyres and BalkrishnaTyres are some of the other
players in the industry. MRF, the largest tyre manufacturer in the country, has strong brand
equity. While it rules supreme in the industry, other players have created niche markets of their
own. The Indian tyre industry is two tiered; Tier-I players (top 5 tyre companies), account for
over 77% of industry turnover and have a well diversified product-mix and presence
in
all
three
(OEM's) and exports. Tier-II companies are small in size, mainly concentrating on production of
small tyres (for two/ three-wheelers, etc.), tubes & flaps and the replacement market.
Vehicle categories
Exports
-ply tyres
The two types of synthetic rubber used in tyres are Poly Butadiene Rubber (PBR) and Styrene
Butadiene Rubber (SBR). The former is used in most of the tyres, while the latter is mainly used
in the radials for passenger cars. Synthetic rubber accounts for 14 per cent of the raw material
cost. Unlike in the case of natural rubber, India imports 60 per cent of its synthetic rubber
requirements. Apart from rubber, major raw materials are nylon tyre cord and carbon black. The
former is used to make the tyres strong and impart tenacity to it. The latter is responsible for the
colour of the tyre and also enhances the life span of the tyre. Nylon tyre cord comprises 34 per
cent, while carbon black accounts for another 13 per cent of the raw material cost. In India, the
carbon black used is of the N660, N220 and N330 variety.
To sum up, the tyre industry is highly raw-material intensive, with raw material costs accounting
for 70 per cent of the cost of production. Fortunately for the industry, the rubber and carbon
black prices have taken a beating recently, which means lower costs for the tyre industry. The
export-import policy allows free import of all types of new tyres and tubes. However, import of
retreaded tyres, either for use or for Reclamation of rubber is restricted. This has led to used tyres
being smuggled into the country under the label of new tyres. Though tyre import and all raw
materials for tyresexcept natural rubber are under Open General License (OGL), only import of
natural rubber from Sri Lanka iseligible under OGL.
Crossplytyres have been used in India for several decades. In these tyres, the ply cords run across
each other or diagonally to the outer surface of the tyre. Rayon and nylon tyre cords are used as
the reinforcing medium. These tyres can be retreaded twice during their lifetime
and are hence preferred by Indian transport operators who normally overload their trucks. A
vehicle with the normal carrying capacity of around 12 tonnes is usually loaded with double the
capacity. Moreover, one also has to contend with the bad suspensions and bad road conditions.
No wonder, 95 per cent of the tyres used in India are crossplies.
Radial tyres have their cords running radially from bead at 90 degrees angle to the rim or along
the outer surface of the tyre. The reinforcing mediums used in these tyres are
polyester,
nylon, fibreglass and steel. Hence, these tyres are 20 per cent more expensive than
the crossplies. But they have a longer life and provide lower fuel consumption. The unhealthy
condition of the Indian roads has resulted in radial tyres accounting for only 5 per cent of the tyre
industry as against a global trend of 60 per cent. With two-thirds of the capacity of all major tyre
manufacturers being reserved for radials, this is a real cause for concern.
1.7 HISTORY :
The origin of the Indian Tyre Industry dates back to 1926 when Dunlop Rubber Limited set up
the first tyre company in West Bengal. MRF followed suit in 1946. Since then, the Indian tyre
industry has grown rapidly. Transportation industry andtyre industry go hand in hand
as the two are interdependent. Transportation industry has experienced 10% growth rate year
after year with an absolute level of 870 billion ton freight. With an extensive road network of 3.2
million km, road accounts for over 85% of all freight movement in India.
The tyre industry has witnessed a CAGR of 8.3% over the last decade mainly fuelled by the
strong growth in the domestic auto industry. Though the replacement market has driven the
industry growth for long time, the OEM market has seen a robust growth over the last couple of
years. The industry is highly capital intensive, as it requires around Rs4bn to setup a radial tyre
plant with a capacity of 1.5mn tyres and around Rs1.5-2bn for a cross ply tyre
plant of a capacity
correlation with the prices of key raw materials such as rubber and crude oil as they account for
more than 70% of the total costs.
The raw material to sales ratio in the industry is around 65%. The industry has high entry barriers
because of its capital intensive nature and low operating margins. With demand increasing at a
steady pace, the industry is expected to go through a consolidation phase. The industry is
dominated by four players viz MRF, Apollo Tyres, JK Industries and Ceat and enjoys more than
77% of the total market share.
domestic auto industry, retreading, trend in road transportation and spending on road
infrastructure.
The companies have lined up further expansion plans to meet the increasing
demand.
The Indian tyre industry is expected to clock a tonnage growth of 9-10 per cent over the next five
years, according to a study by Credit Analysis and Research Limited (CARE), a noted rating
firm that offers a wide range of rating and grading services across sectors. While the truck and
buses tyres are set to register a CAGR (compounded annual growth rate) of 8 per cent, the LCV
(light Commercial vehicles) tyres are poised for a CAGR of 14 per cent. According
to
the
CARE study, the growth in the Indian tyre industry will be fuelled by the
expansion plans of the automobile companies, government's focus on development of road
infrastructure and sourcing of auto parts by the global Original Equipment Manufacturers
(OEMs). However, the tyre industry has to grapple with raw material price volatility, rupee
appreciation and cheap Chinese imports. The tyre industry in India recorded a CAGR of 9.69 per
cent during 2002-07.
The size of the industry was estimated at Rs 25000 crore in 2009-10 with a total production of
971 lakh units of tyres. The study points out that on the export front, the Indian tyre companies
need to explore newer markets as the existing market for bias truck tyre which accounts for about
45 per cent of the total export volume is nearing saturation. This apart, with rationalization
catching up in the foreign markets, the Indian tyre companies need to graduate to radial tyres so
as to protect their share in the export market.
At present, radicalization of tyres is low in India except for the car tyre market where 95 per
cent of the tyres is radicalized while cross ply tyres is preferred in all other categories. Cross ply
tyres are preferred owing to poor road conditions, overloading in trucks, higher cost of
radialtyres and poor awareness among the tyre users in the country. The CARE report observes
that though the tyre technology in India has witnessed several developments with
continuous innovation, the domestic tyre manufacturers still lag behind their global counterparts
in terms of product differentiation.Globaltyre makers offer a wide change of products like tyres
with pressure warning systems, run flat tyres, eco-friendly tyres and energy efficient tyres.
Though in FY09, we expect the industry to register a tonnage growth of only 4.27%, the growth
is expected to be higher in the medium and long run. In FY10, CARE Research expects the
industry to post a growth of 6.81% and the industry growth is expected to touch 8.21% on a
CAGR basis between FY08-13. The T&B and LCV tyre categories are expected to register a 5year CAGR of 6.83% and 8.97%, respectively during this period. For in-depth analysis and our
view on the future of this sector, please refer to the exhaustive Report on Indian Tyre Industry.
The debate on the environmental impact of tyres and other rubber products is generally
dominated by the risks and impacts associated with above ground tyre stockpiles. These
stockpiles are often visually prominent and
fires
and the
creation of breeding sites for mosquitoes and other vermin are well documented. However, the
environmental impacts of rubber products extend well beyond these and appear through all of the
stages in the life of the product. It is important to consider all of these impacts to ensure that
waste management approaches do not simply result in the transfer of impacts to a different stage
in the life cycle, or to a different environmental medium, and result in greater overall impacts.
10
CHAPTER 2
MAJOR PLAYERS
11
2.1 MRF
MRF is the market leader among tyre manufacturers in India, with a 24% share in terms of revenues. Its
leadership position, coupled with its strong brand recall and high quality, MRF commands the pricemaker status. MRF has a strong presence in the T&B segment, the largest segment of the tyre industry,
and commands around 19% market share in the segment. It is the leader in the two/ three-wheeler
segment (including motorcycles) and tractor front tyres, and holds second place in the passenger cars
and tractor - rear tyres. Exports account for around 12% of the gross sales in MRF. The Company has a
distribution network of 2,500 outlets within India and exports to over 65 countries worldwide.
Apollo Tyres is the second largest player in the Indian tyre industry, with a market share of 22%, in
terms of revenues, and the largest player in the T&B segment, with around 22% market share and 82%
of its product mix coming from this segment. It also enjoys a strong brand recall. ATL derives 80% of
its revenues from the replacement market, where the EBITDA margins are higher; hence, at operating
levels, Apollo Tyres has better margins compared to those of its peers. ATL is a strong player in the
domestic market, with just 2% of sales coming from exports.
Apollo's recent foray into the relatively fast growing passenger radial market is probably the only major
positive feature. However, the competitive pressure and a late entry into the segment would pressurize
profitability, at least in the near term. From an investment perspective, investors could look for
opportunities to exit from Apollo and the tyre sector.
12
2.2.1 HISTORY
First Indian Tyre Company to launch exclusive branded outlets -- Apollo Tyre World -- for truck tyres
First Indian Tyre Company to segment the market on the basis of load and mileage requirements
First Indian Tyre Company to introduce packaging for car and two-wheeler tyres and tubes
First Indian tyre company to run a customer loyalty program
First Indian Tyre Company to introduce radial tyres for the farm category
First Tyre Company in India to obtain ISO Certification for all its operations
First Indian Tyre Company to produce H, V and W-speed rated tubeless tyres
FirstIndian Tyre Company to run HIV-AIDS awareness and prevention clinics for the
trucking community
First Indian Tyre Company to support the creation of an Emergency Medical Service in an Indian city
First Indian Tyre Company to execute an overseas acquisition
FirstIndian Tyre Company to reach revenue of over US$ 1 billion
2.3 JK INDUSTRIES
JK Tyre & Industries Ltd. is the flagship company under the umbrella of JK Organization
JK Industries has a 17% market share, in terms of revenue, making it the third largest player in the
industry. The Company ranks first in the MHCV and Passenger Car tyre segments, with 79% and 7% of
its product mix coming from these segments, respectively. Exports account for approximately 17% of its
gross sales.
The advent of JK Organization on the industrial landscape of India almost synchronizes with the
beginning of an era of industrial awareness - an endeavor for self reliance and the setting up of a
dynamic Indian industry. This was way back in the middle of the 19th century. And the rest that
followed is history.
13
Core Value
JK Organization has been a forerunner in the economic and social advancement of India. It always
aimed at creating job opportunities for a multitude of countrymen and to provide high quality products.
It has striven to make India self reliant by pioneering the production of a number of industrial and
consumer products, by adopting the latest technology as well as developing its own know-how. It has
also undertaken industrial ventures in several other countries.
JK Organization is an association of industrial and commercial companies and charitable trusts. Its
member companies, employing nearly 50,000 persons are engaged in the manufacture of a variety of
products and indiversefield so commerce.
Trusts are devoted to promoting industrial, technical and medical research, education, religious values
and providing better living and recreational facilities. With the spirit of social consciousness uppermost
in mind, J.K. Organization is committed to the cause of human advancement.
2.4 CEAT
CEAT has a 14% market share, in terms of revenues, and is an average player across categories. 68% of
its product mix comes from the MHCV segment. Its leading brands in the T&B segment are Lug XL,
Mile XL and Rib XL, Secura in two-wheelers and Formula-1 in passenger radials. In terms of
profitability, CEAT has lower margins compared to its peers, in spite of deriving 60% of its revenues
from the replacement market.
The oldest company of the RPG Enterprises, CEAT Tyres was established in 1958. Today, we are one
of Indias leading tyre manufacturers, with an annual turnover of Rs 1,952 crores (US $434 million).
Our solid brand equity has empowered us to establish a strong presence in both, domestic and
international markets. Our tyres, tubes and flaps are renowned for their superior quality and durability,
and are recognized as being born tough.
14
2.4.1 HISTORY
CEAT stands for Cavi Electrici Affini Torino (Electrical Cables and Allied Products of Turin).
CEAT International was first established in 1924 at Turino in Italy and manufactured cables for
telephones and railways.
In 1958, CEAT came to India, and CEAT Tyres of India Ltd was established in collaboration with
the TATA Group.
In 1982, the RPG Group took over CEAT Tyres of India, and in 1990, renamed the company
CEAT Ltd.
Enjoys 55% of the local market for light truck and truck tyres.
Has a robust network consisting of 36 regional offices, over 3,500 dealers and more than 100 C&F
agents.
Has a dedicated Customer Service department, comprising Customer Service Managers in all four
divisional offices, assisted by 50 Service Engineers.
15
Category
OEM Partner
Truck
LCV
Passenger Car
Utility Vehicle
Farm
SHCV
JCB, L&T
Two-wheelers
OTR
Goodyear India, with presence across the globe, has a market share of 6% in the Indian Tyre industry, in
terms of revenues. It has a significant market share in the tractor tyres segment, with 22% share in
tractor - front tyres and a 30% share in tractor - rear tyres. It derives 45% of the product mix from the
MHCV segment and 31% from the tractor tyres segment.
16
The table given below gives the list of the top 3 players (considering their market share as per
volumes) in these 3 major segments.
17
As seen in the above table, the T&B (Truck & Bus) segment is highly competitive with the top 3
players having market share very close to each other. JK Tyre is slightly ahead with a 22%
market shares. Apollo Tyres is the market leader in Passenger Car segment with 24%. MRF
which has a good presence in all the segments is the leader in Motor Cycle with 28% share.
18
CHAPTER 3
MACRO ANALYSIS
19
3.2PRICING SCENARIO
Pricing is influenced by the demand. Since the tyre demand has not significantly increased in the last one year,
many of the tyre companies have surplus stocks. Hence in the last 2-3 months the tyre companies are offering
discounts between 20 to 40 percent to car manufacturers, but the car companies are trying to squeeze more
discounts. The cheap imports of non-radial tyres from china are also adding to the present
of the tyre
manufacturers
20
The export market for India has been predominantly to the USA that accounts for nearly 30% of
exports from the country. These are mostly of the cross ply variety. However, of late Indias share in
the US market is being threatened by China and Japan. These two countries are able to offer prices that
are lower than that offered by Indian manufacturers. In addition, these two nations are logistically
better placed than India when it comes to exporting to the USA. Domestic tyre manufacturers are also
facing threat from imports from China and South Korea. The landed cost of tyres from China is lower
than the Indian price by 30%. In addition, tyres from South Korea are imported at 30% customs duty
while from other countries the duty levied is 35%. Thus, In the both cases the domestic tyre
manufacturers are feeling the heat.
3.4GOVERNMENT POLICIES
The recent budget policy of the government has also not brought much relief to the tyre manufacturers.
The major issues of concern are high import duty on raw materials, ban on import of used tyres, lack of
exemption in import duty for steel and polyester tyre cords (currently being imported) and imports of
tyres from South Korea at lower duty.
21
"Rate of radialisation is actually an index of the status of road development, vehicle engineering and the
economy in general". Notwithstanding the problem areas, constraints and limitations, the tyre
companies have kept pace with the technological improvements that radialisation signifies and offer
state-of-the-art product (tyres), comparable to the best in the world.
Radialisation can be aptly classified as the most important innovation in tyre technology. Despite its
several advantages (additional mileage; fuel saving; improved driving) radialisation in India earlier did
not catch on at a pace that was expected, since its introduction way back in 1978. This could be
attributed due to several factors, viz. Indian roads generally not being suitable for ideal plying of radial
tyres; (older) vehicles produced in India not having suitable geometry for fitment of radial tyres (and
hence the general, and wrong, perception that radial tyres are not required for Indian vehicle;
unwillingness of consumer to pay higher price for radial tyres etc.
However, the situation has radically changed in recent years, especially for the passenger car tyre
segment where radialisation has crossed 98% mark and is expected to reach 100% in two to three years.
In the Medium and Heavy Commercial vehicle segment current level of radialisation is up to 15%, and
that in the LCV segment is estimated at 18%. A few years back a beginning was made in Radialisation
of truck and bus and LCV tyres and this process is gaining momentum.
22
44%
19%
Carbon Black
12%
Rubber Chemicals
5%
Butyl Rubber
4%
PBR
5%
SBR
5%
Others
6%
44% of total Natural Rubber consumption is by the Tyre Sector balance by rubber based non-tyre
industries.
Total weight of raw-materials consumed by tyre industry 17.50 Lakh M.T.
Total Cost of Raw Materials consumed by tyre industry Rs.21, 000 Crores
Indias 90% of the rubber production comes from Kerala. Domestic rubber production has increased at a
compounded growth rate of 9% annually from 1991 to 1997 after which the production slowed down.
However In FY 2001, rubber production soared and crossed double-digit mark at 10.2%.
24
Total
Tyre
Non Tyre
Total
Tyre
Non Tyre
Materials
Cons.
Sector
Sector
Import
Sector
Sector
Cons.
Cons.
Imports
Imports
944700
63%
37%
177637
95%
5%
SBR
174855
66%
34%
115520
100%
PBR
125305
85%
12%
45000
Carbon
412640
46700
115000
58000
35000
20000
30000
20000
40000
40000
Natural
Rubber
Black
Nylon
Tyre Cord
Rubber
Chemicals
Steel Tyre
Cord
Butyl
25
Rubber
Production
Consumption
Tyre Sector
Total
Imports
Cons.
Total
2005-06
749660
406220
54%
349170
46%
755400
68700
2006-07
802625
442921
55%
358189
45%
801110
45285
2007-08
852895
462081
56%
358224
44%
820305
89799
2008-09
825345
495577
58%
365878
42%
861455
86394
2009-10
864500
508121
58%
363599
42%
871720
77616
2010-11
831400
576210
62%
354355
38%
930565
176756
20-11-12
861950
597623
63%
350092
37%
947715
177637
26
Demand for tyres can be categorized under four segments - Replacement Market (RM), the Original
Equipment Manufacturers (OEMs), Exports, and the Government. In FY05-06, the replacement market
constituted 48.7% of tyre sales (by volume), followed by OEMs at 42.8%. Exports constituted 8.2% and
government sales were at 0.3%. According to the products, the maximum tyre sales are in the Truck &
Bus segment, followed by Passenger cars and Tractor Trailers.
27
Growing economy:
As we know that the Indian marketis growing economy and so the transportation , demand in
automobile industries etc are very high so the tyre industries is also benifited.
Increase in the demand of freight movementso that it is nessory to incrase in the moving the
demand of tyre product.
The OEMs are always in strong position when the bargaining power of buyers is concerned.
The reason behind this is most of them are having contract with their relative tyre
manufacturer under which the prices of tyre remains stable for this OEM irrespective of
market price. The benefits are given to them as they are buying in bulk and the relation gives
the tyre firms something called brand association.
3) Passenger Cars
Jeep, Bus, Rickshow
4) Others
Tractors, JCB,Truck
The Indian tyre industry produces the complete range of tyres required by the Indian automotive
industry, except for aero tyres and some specialized tyres. Domestic manufacturers produce tyres for
trucks, buses, passenger cars, jeeps, light trucks, tractors (front, rear and trailer), animal drawn vehicles,
scooters, motorcycles, mopeds, bicycles and off-the-road vehicles and special defense vehicles.
29
BY MARKET:
OEM
Replacement
Export
Category
Truck/Bus
Production
(Nos.)
2010-12
(April-
Replacement
September)
Market
7799228
65
OEMs
21
Export
14
30
LCV
Tractor Front
Tractor Rear
Scooter / Moped
Motor Cycle
14165944
42
53
3400113
34
41
25
1419373
44
972938
34
64
10979956
43
53
22931173
46
52
31
32
3.14.6 RADICALIZATION
63% of passenger car tyres produced in India were radials and the industry is further expecting
radialisation in this segment to over 70% in the coming two years. While in the commercial vehicles
segment they are expecting 13-15% radicalization by that time.
3.14.7DEMAND SUPPLY GAP
The demand for tyres is either in the domestic market or in the export market. As far as domestic
demand is concerned, the OEM and the replacement segments are likely to witness strong growth given
the current performance of the automotive sector. Given the strong linkages of tyre industry with
automotives, its demand is likely to be strong over the short to medium term. As for the export demand
for tyres, the outlook is positive, even though some downsides remain.
As regards supply of tyres, currently, the major players are in the process of expanding their capacities,
in anticipation of uptrend in sales. For instance, Apollo Tyres has set up a joint venture with Michelin
for manufacture and sale of bus and truck radials. JK is expanding its Mysore truck and bus radial
facility along with eyeing acquisitions of smaller units. CEAT has increased its off take by 3 times from
Pirelli. However, a characteristic of the Indian tyre industry is that most of the tyre manufacturers in the
past had increased capacities in anticipation of a surge in demand, but when it did not materialize, they
reduced their addition to capacities.
Raw material costs account for almost 70% of the tyre industrys incomes. Labor cost is another
significant overhead. The Tyre industry has a narrow product range, huge operating overheads and high
break-even levels. Raw material costs for the last three years have been raising constantly, especially
those of rubber and crude oil-linked raw materials. The steep rise in raw material prices has impacted
profit margins of all players. Consistent rise in major raw materials costs (those of natural rubber, nylon
tyre cord, carbon black, synthetic rubber), with limited pricing flexibility, has resulted in pressure on
margins of tyre companies, despite a good top line growth. Consequently, while the revenues showed a
33
healthy growth, profitability remained depressed. In fact, some of the major tyre companies are
operating at break-even situations.
4%
5%
5%
Natural Rubber
6%
5%
Carbon Black
Rubber Chemicals
12%
Butyl Rubber
19%
PBR
SBR
Others
3.15.1
RUBBER PRICES
In 2010-11, production and consumption of rubber grew by5.5% and 6.2%, respectively, while exports
increased by 51.2% (for the same period), on account of the imbalance in the global demand-supply
position. The average domestic price of rubber increased by 20.3%, while the international prices soared
by 31.5% in the same period. In April-June 2009, Domestic-Rubber prices increased 59% year by year,
while the international prices increased 76.6%. Natural-Rubber prices have been continuously on the
rise in the international markets, with weather conditions playing a major role in disrupting supplies.
During FY08, China lost rubber plantations in the Hainan province due to a typhoon in September 2008,
followed by floods in Thailand and Malaysia in December, the same year. Production suffered in most
rubber-producing regions in India, due to bad monsoons, which in turn led to the soaring of rubber
prices. With international natural-rubber prices ruling high, and India being a part of the global market,
34
exports of rubber from the country affected the demand and supply positioning in its domestic market.
The growth in exports is driving-up average domestic prices of rubber. With rising demand from the
Tyre sector, the supply situation is expected to remain constrained in the medium term. Currently,
rubber prices have depleted to around Rs 80-levels, but there is high level of volatility and hence, their
behavior is difficult to predict. If current levels persist, it would result in better profitability for tyre
companies.
RUBBER prices have suddenly spurted to a four-year high, touching Rs 38 per kg for RSS 4 on
Tuesday. This unexpected rise has bolstered the demand for restoring duty free import of rubber under
advance license. Last time, the price reached this level during September 1997.
The rubber market remained steady in July this year with average price for RSS 4 being Rs 33.90.
Market trends during the first week of August indicate that the price may move up further as there is
acute shortage of rubber in the market. However, demand is not high enough to bring about an abrupt
price spurt. The market is obviously chasing deficient supply.
One reason for the short supply is this year's thunderous monsoon. For about a month, rubber tapping
has been halted. Rubber plantations in many regions were hit by inclement weather.
Also, the turmoil raised by the introduction of turnover tax (TOT) is another factor. The 1.5 per cent tax
imposed on the annual turnover of Rs 30 Lakh and above came into force on August 1. This is not
transferable to consumers. Traders fear that the levy will drastically erode their income and make rubber
trade unprofitable.
The levy has forced majority of the traders to keep down their volume of business in an effort to confine
the annual turnover to Rs 30 Lakh.
However, a section of the growers feel that the current price escalation is artificial. The market's quick
march ahead despite high stock in the country has surprised them. Some of them attributed conscious
efforts by the tyre sector to push up the price in order to get the ban on advance license imports lifted.
35
Some growers have also raised an allegation that a few major rubber traders are hoarding rubber to take
the price to the height of Rs 40 per kg, which would indirectly help the designs of the manufacturers to
demand lifting the ban on duty free imports.
The current price is way above the price in the international market. While RSS 4 is traded at Rs 37 per
kg in the country, world price of comparable grades of rubber is fluctuating around Rs 27.60 per kg.
The current stock of natural rubber is estimated to be 150,000 tones, against the monthly consumption
of around 50,000 tones.
3.15.2 NYLON TYRE CORD (NTC) FABRIC
Nylon tyre cord accounts for around 19% of the total raw material costs. During 2008-09, the
production of NTC fabric declined by 12.2%, while its consumption grew by 9%. This imbalance in the
production-consumption pattern has led to a 7.5% increase in domestic NTC prices in 2008-09.
The international prices are much higher than domestic rates and have shown a 15.2% increase in 200809; the price of caprolactam, the main feedstock for NTC fabric, increased by 6.2% in the same period.
However, the average international and domestic prices during April-June 2009 were lower by 22% and
18%, respectively, due to carpolactam prices, which declined by 10.8 %.
36
Tyre companies sell tyres through widespread dealer distribution net-work (over 5000 in the country),
either through exclusive dealer of the companies or through multi-company dealers.
3.17.1 OEM
Direct supply by tyre companies through negotiations.
3.17.2 STU
Direct supply by tyre companies through tender system.
3.17.3 GOVERNMENT
Direct supply by tyre companies through tender system. Through dealers in the exporting countries.
3.17.4 IMPORT
Some tyre companies also import tyres for the domestic market. Such imports are generally from the
principal company overseas or from technical collaborator or from tyre companies with which it has an
alliance for a particular line of tyres, for example, passenger car tubeless tyres; With tyre import freely
allowed, import of various categories of tyres is also taking place.
Tyres are imported by importing agents and then marketed through the dealers who are marketing
Indian tyres also.
37
The global tyre market currently is estimated at USD 70 billion while the Indian market is around Rs.
100 million. The global market is dominated by Goodyear-Sumitomo with a share of 22%. On the other
hand, the domestic industry is dominated by MRF Ltd. Several mergers and acquisitions have
characterized the global market, in the recent past. This is essentially to acquire technology, gain wider
access to markets and be competitive. Indian players are also reengineering their businesses and
looking at strategic tie-ups in this segment.
In terms of technology, radial tyre usage has been catching up at a quick pace in the global market.
Almost all the automobile segments have shifted to radial tyres and the usage of cross ply is restricted to
trucks and buses only. On the other hand, in the domestic market, the radial tyres are being used only in
the passenger car segment while the rest of them still stick to the cross ply variety. This is because of the
lower price of cross ply and its re-tread ability. In addition, the poor quality of roads in India
restricts the use of such tyres.
Companies
Michelin
19.4
Bridgestone
19.4
38
Goodyear
16.6
Continental
7.1
Sumitomo
4.9
Pirelli
3.9
Yokohama
3.5
Kumho
1.7
Others
23.5
TECHNOLOGY UP-GRADATION
In Tyre Industry technology upgradation is absolutely critical issue. In the era of modernization and
globalization, there are difficult to find a place or exist into the business without innovations or
upgradation of technology. So, many companies are come by the certain technology innovations and
newer things. In Tyre Industry now a day we find concepts of Tube-less Tyres, Environmental Friendly
Green Field Tyre, and Anti puncture Tyres and So on. We can put this technology upgradation as a
major Key Success Factors in the Tyre Industry.
RADIAL TYRES
Industry likely to focus on the manufacturing of high performance Radial Tyres. Radial Tyre provides
long life in compare of the other basic tyres. And there are threat from the China and South Korea who
are providing the Radial Tyres with the high amount of efficiency with the low prices. Some companies
are now realizing the importance of this technology and they are start working in this area. If the
companies are successful in production of Radial Tyre with high efficiency and low price then it will be
drives the growth rate of Tyre Industry at new levels. So, Radial Tyre will be a one of the major Key
Success Factor for the Industry.
39
GOVERNMENT POLICY
Government policy also works as a Key Success Factors in Tyre Industry. It means to say that how
much government is aggressive towards the infrastructure developments? And the other policies and
rules towards the Industry. This factor leads the whole industry in particular directions.
1987
Freely alowed
Freely alowed.
tyres:
2006
40
Day by day the automobile Industry is growing and there is no other option to the automobile industry
for replacing the tyre.
The main raw material of tyre is rubber and it is easily and cheaply available in the India. So if the raw
material is available at cheap rate and selling at higher rate means the margin is very high in this
business.
3.20.2WEAKNESS
LACK OF TECHNOLOGY
In India the production of tyre is still done by the old and manly style so many times it costs more than
the technological production of tyre.
NUMBER OF PLAYER
Number of player in the tyre industry is high around 46 but there is only 8-9 players who covers 90% of
the market share so they becomes the dominating in the price decision.
41
3.20.3 OPPORTUNITIES
Since the first car rolled out on the streets of Mumbai (then Bombay) in 1898, the Automobile Industry
of India has come a long way. During its early stages the auto industry was overlooked by the then
Government and the policies were also not favorable. The liberalization policy and various tax relief by
the Govt. of India in recent Years have made remarkable impacts on Indian Automobile Industry. Indian
auto industry, which is currently growing at the pace of around 18 % per annum, has become a hot
destination for global auto,players, likeVolvo,General Motors and Ford.A well developed transportation
system plays a key role in the development of an economy, and India is no exception to it. With the
growth of transportation system the Automotive Industry of India is also growing at rapid speed,
occupying an important place on the 'canvas' of Indian economy.
Traditionally, the replacement market has been the main growth driver for the tyre industry, as also the
major segment that consumes tyres; however, with the recent escalation in auto sales, OEM demand too,
has been on a substantial increase, thus enlarging its share in the sales pie. Auto sales have been
growing at a CAGR of 15.8% during 2002-06, which has driven the growth in the tyre industry, keeping
the OEM demand buoyant. Going forward, the automobile industry is estimated to grow at double
digits. This, in turn, is expected to keep demand, for tyres from OEMs, buoyant. Looking at the global
rail-to-road cargo scenario, in Europe, roadways have an 84% share, while in India, currently, the ratio
is 35:65, which was 62:38, two decades ago. Also, with growth in roadways and with projects like
Golden Quadrilateral and NSEW getting implemented, there would be a further shift in freight
movement, from railroad to roadways. This would lead to an increase in demand for automobiles and
hence, the OEM
Demand for tyres.
42
3.20.4 THREATS
Continuous increase in prices of natural rubber, which accounts for nearly one third of total raw
material costs so it become a big threats again industry.
Cheaper imports of Tyres, especially from China, selling at very low prices, have been posing a
challenge. The landed price is approximately 25% lower than that of the corresponding Indian
Truck/ LCV tyres. Imports from China now constitute around 5% of market share
With crude prices scaling upwards, added pressure on raw material prices is expected
Ban on Overloading
Industry estimates say that nearly 15% of Commercial Vehicles are overloaded to the extent of
100-150%, which results in a higher wear and tear of tyres. The recent Supreme Court order, to
curb the overloading of trucks, is expected to affect the demand for MHCV tyres, in both, the
replacement and OEM markets. On account of the ban on overloading, the life of a tyre would
increase and also, tyres that are not overloaded would further enable re-treading, before being
replaced. Hence, the replacement demand may come down. However, the curb on overloading is
expected to lead to additional truck sales, as also the demand for multi-axle vehicles would rise.
This would lead to higher OEM demand. So, in the short term, ban on overloading could be a
dampener, but in the long run, it is definitely a positive move. The ban would also provide a fillip
to radialisation.
Passenger cars, Bus, Truck etc. The Growth rate of tyre industries is also very high because of
growing economy.
2) Number of Rivals:
The market is growing so this is the main point is to attract the rivals and there are major five players
in this market like, MRF, APOLLO, JK, CEAT, GOOD YEAR. These are all very strong players in
the market.
5) Product innovation:
Product innovation includes new product design, life of the product etc. The product category of all
the players are same so product innovation is very much required by the companies so the companies
are always doing innovation in their products.
7) Technological change:
Technology plays a vital role in any business or industries success because our differentiation is based
on how and what kind of technology we are using for our production process or R & D department
how we accepted the technological changes and make our product successful in the market .
44
One important component of industry and competitive analysis involves delving into the
industrys competitive process to discover what the main sources of competitive pressure are and
how strong each competitive force is. This analytical step is essential because managers cannot
devise a successful strategy without in-depth understanding of the industrys competitive
character. Even though competitive pressures in various industries are never precisely the same,
the competitive process works similarly enough to use a common analytical framework in
gauging the nature and intensity of competitive forces.
Two things determine your companys profitability- the industry in which it competes and its
strategies position in the industry. Some industries have inherently low profit potential while
others are highly profitable. The most profitable companies have a strongest competitive position
in a profitable industry. The poorest companies have weak positions in weak industries.
The following write-up is a view of the Indian Consumer electronics goods industry from these
five angles leading to the expected changes in the coming years in the underlying structure of the
Indian Consumer electronics goods industry.
45
Source: Adopted from Michael E. porter, how competitive forces shape strategy, Harvard Business Review 57, no. 2 (March-April 1979), pp. 137-45.
46
Supplier Power-High
The demand of most raw material
especially rubber is high, while
supply is restricted
Barriers to New
Entrant-High
Capital- intensive
Distribution Network
Low operating Margin
Branding
Competitive
PressureHigh
Top six players enjoying
over 80% of total market
share
Threat of SubstitutesLow
Import Especially from
China.
China is a great substitute for
Indian tyre industry
47
1) In the tyre industries the Bargaining power of suppliers is high because the demand for most raw
materials, especially rubber, has been high. While the supply is restricted. So, it will result into the rise
in the price. And it will be resulted in high supplier power.
48
The threat of new entrant is described as low because the industry is highly capital intensive and the
level of technological expertise required is also highly specific. But if we see from domestic (Indian)
industry's point of view, this better can be defined as high. The reason being, global tyre industry is
already seeing mergers and acquisitions in order to restructure. And as of now India and China going to
be the hub of activities as far as tyre industry is concerned due to low production cost as well as other
relevant benefits. So for any of the global big shot Indian company will be a good option to go for.
Capital requirements:
Capital requirement for investing these type of business is very high because the kind of
machinery and technology required for production of tyre is very advanced so there is very less
opportunity for new entrants.
Government Policy:
Government policy regarding establishing new business is very strict because these kind of
business generate high pollution and it is dangerous for the enviourment as well as health of
people.
where the vehicle manufacturers are not ready to share the burden of tyre firms, the portion of
replacement pie continuously taken away by the retreading sector which is slowly but firmly rising
its head and that to in high realization segment of Bus-Truck tyres and last but not the least the
unorganized sector is always there to give head ache to these established players like CEAT, JK,
Apollo and MRF etc.
50
Critical Success
Factor
APOLLO
MRF
CEAT
JK
GOOD
YEAR
WS
WS
WS
WS
WS
Market Share
0.16
0.64
0.32
0.48
0.48
0.48
Price
0.13
0.39
0.13
0.26
0.39
0.26
Financial Position
0.20
0.80
0.40
0.60
0.60
0.62
Service Quality
0.17
0.51
0.51
0.51
0.68
0.51
Customer Loyalty
0.18
0.36
0.36
0.38
0.54
0.36
Reputation
0.16
0.48
0.16
0.48
0.64
0.48
TOTAL
Competitiveness
3.18
1.88
2.71
3.33
2.71
1. Interpretation of CPM:
Financial position is the most important critical success factor, as indicated by a weight of
0.20. The sample company (APOLLO),market share and financial position are superior, as
evidenced by a rating of 4.
Competitors 1s (MRF) price competitiveness and reputation are poor, as indicated by rating
of 1.
Competitor 2 (CEAT) customer loyalties and price competitiveness are poor as indicate by
rating 2.
Competitor 3 (JK) is the strongest firm overall as indicated by total weighted score of 3.33
A word on interpretation: just because one firm receive a 3.33 rating and the receive 2.71
rating in a CPM, it does not follow that the first firm is 22% better than second.
From the CPM analysis we can say that take the dominate position in the tyre market.
52
53
Extent of Branding
Marketing Effort
Pricing policy
Helps identify who the most direct competitors are and on what basis they compete.
Raises the question of how likely or possible it is for another organization to move from
one strategic group to another.
At the last have to saw the potential movement means the strategy for future movement
Market share
MRF
572.11
19.8%
APOLLO
321.53
21.0%
JK
121.6
18.0%
CEAT
120.35
24.0%
GOODYEAR
56.35
11.0%
CEAT
APOLLO
20%
MRF
JK
15%
Y-market share
10%
GOOD YEAR
5%
0%
-100
100
200
300
400
500
600
700
55
INTERPRETATION:
1) In this chart in X axis Net Profit and Y axis Market Share of the company.
2) MRF is highest profit getting company and GOODYEAR is lowest profit getting company.
3) CEAT having highest market share and GOODYEAR having lowest market share.
4) CEAT, APOLLO, and MRF are having more competition among each other in the market
share category.
5) CEAT and JK are having competition on net profit getting .
6) CEAT having close competitors like APOLLP, MRF, and JK.
56
DESCRIPTION
PEST analysis is nothing but analysis of external environmental factors. The factors included
in PEST analysis are political/legal, economic, social-cultural, and technological. Each
industry is more or less affected by each of these factors. Every industry has to consider these
factors because these factors can create opportunity or threat at regular period of time. We
will now discuss all these factors in detail.
The PEST analysis is a framework that strategy consultants use to scan the external macroenvironment in which a firm operates. PEST is an acronym for the following factors:
Political
Economic
Social
Technological
PEST factors play an important role in the value creation opportunities of a strategy. However they are
usually outside the control of the corporation and must normally be considered as either threats or
opportunities.
Completing a PEST Analysis is relatively simple, and can be done via workshops using brainstorming
techniques. Usage of PEST analysis can vary from: company and strategic planning, marketing
planning, business and product development, and research reports.
57
Government Policy
Tyre Industry Delicenced
1987
Freely allowed
A. TRADE POLICY
All categories of new tyres can be imported freely. No WTO Bound Rates for tyres & tubes.
Tyre imports under the Asia Pecific Trade Agreement (formerly Bangkok Agreement) between
India, Bangladesh, South Korea, Sri Lanka & China allowed at a concessional custom duty of
8.60%.
All raw materials required for the manufacture of tyres can be imported freely (OGL).
B. TARIFF DUTIES
C. EXCISE DUTY
Tyre is essential for the growth of economy and used in movement of goods and common man. By
reducing excise duty on tyres, road transportation becomes more cheaper thereby reducing the cost of
commodities. The Excise Duty should be reduced from 16% to 8% and the customs duty on natural
rubber (HS Code 4001.21) be reduced from 20% to preferably 7.5% or 10%. The Government may also
consider waiving the customs duty on butyl rubber, polyester tyre cord and styrene butadiene rubber
(tyre grades: S-1502 & S-1712).
D. ECONOMICAL FACTORS
The industry is expected to grow at an average rate of 7% per annum during Eleventh Five-Year Plan
period.
Raw material price of any of the product is the major determinant for any of the industrial sector. Tire
industry is also getting affected by this factor. Prices of natural rubber, carbon black and the nylon tyre
cord directly affected the price of the tyre since these input constitute of 60 % of the total cost. Variable
cost is very high leading to thin profit margin. The price of RSS-4 variety of natural rubber remained as
compared to previous year during most of the year.
All the category of new tyre can be imported freely. No WTO bound rates for tyre
& tubes.
Second hand /used tyre can also imported freely (certain condition)
59
3.23.3 DUMPING
Dumping means to sell the same product in another country at the fewer prices then that countries price.
so basically to break market by selling at cheap price. The domestics tyre industries fear dumping of
tyre in Indian by mid-size foreign tyre companies following the government s decision to allow tyre
imports. The industry is more worried about import of used and second- hand tyre into the country than
the new tyres.
The second hand tyres could be offered to Indian customer at throw away prices since disposing of
used tyre is a major problem in developed countries. Thus these how the Indian tyre industry is getting
affected by dumping.
The recommendation for imposing provisional anti-dumping duty on import of cross-ply tyres from
China and Thailand seems to have brought the domestic manufacturers to a stand-off with its dealer
network and sections of user industry as well.
All India Tyre Dealers Federation (AITDF), which had objected to ATMA's anti-dumping plea before
the designated authority, however, believes that imports are here to stay and is going to have a long term
impact on trade and services for two reasons: First, new players are bringing in new trade practices like
paving way for higher rate of return to the dealer network.
Second, apart from the low-end products, imports are increasing at a faster clip in the high-end category
as well.
3.23.4 IMPORT-EXPORT AND TYRE INDUSTRY
Relief on reduction on import duty by 3.5% on input like buty rubber, nylon tyre cord, rubber
chemicals, steel tyre cord and synthetic rubber will help. Big tyre manufactures will be happy, as there
are ancillary industries in this sector.
60
EMPLOYMENT GENERATE:
Employment is always a major factor when measuring the significance of any economic activity. The
automotive industry, on account of its backward and forward linkages, is a significant generator of
employment - both direct and indirect. While direct employment is by way of workers engaged in the
production of Tyre, indirect employment is generated in feeder and supplier industries to the tyre
industry, such as the growers of Natural Rubber, dealer, retreaders, service and maintenance provider
and employment in raw material sector etc. Thus steps are needed to ensure that demand supply gap,
both quantitative and qualitative, in terms of human resources, does not arise.
3.23.6
TECHNOLOGICAL FACTORS
Increased cash and technology requirements in the domestic automobile tyres industry, given the strain
on sales and working capital requirements as a fall out of the low growth and excess capacity in the
industry.
The industry was facing increasing technology requirement in terms of quality, consistency and
longevity necessitating additional investments in modernization, Larger working capital requirements
were also expected on account of the stiff demand conditions prevailing in the industry, it added. The
rating agency believes that increasing technology needs of the industry, especially with respect to radial
tyres, is likely to emerge as a key area in future.
3.23.7
TECHNOLOGY LEADER
In the starting phase of proper Bias or Cross ply tyre, cotton plies were used as main reinforcing
material (end of 19th and early 20th Century). Cotton reinforcing material had inherent problems of low
strength and high moisture regainer. Leading to large number of plies to get the requisite casing strength
61
for the tyre weight of the tyre and poor heat dissipation. This, in turn, gave an adverse impact on Tyre
weight and buck rendering poor performance.
With the development of viscose and rayon the strength of reinforcing material went up and found
application in tyres in early 20th Century. Due to higher strength of rayon it was possible to reduce
number of plies and weight of the tyre. Since less number of plies was needed to match cotton strength,
concept of ply rating developed. It was also possible to have higher ply ratings now.
Pursuant to development and introduction of Polyamide (Nylon) the strength and flexing behavior of
reinforcing materials improved substantially resulting in further reduction of number of plies,
consequently the weight of the tyres. This development substantially improved the heat and impact
resistance of the carcass leading to better tyre performance and higher durability. Nylon casing gave a
boost to retread ability. Thus effective cost of the tyre in operation became much more economical.
Development of Tyre Technology due to change in Reinforcing material is basically in the case of Cross
Ply or Bias Tyres. Bias tyre has cotton, Rayon or Nylon Cords, bound as plies and each ply (i.e. Cords)
cross each other at a definite angle anchoring at the bead.
Once Steel Tyre cord got developed it found its immediate application in Belt material, keeping casing
plies of Textile, to further improve durability.
handling/maintenance of Rims other than in OTR range. However, Tubeless tyres are produced for
Export Market.
Gradually this concept will become fully acceptable with the advent of new generation vehicles and
improved service facilities.
As in the case of Bias Tyres, the concept of tubless tyre was extended to radial construction and
introduced in later half of the century in Developed countries. A tubless tyre not only has tube
eliminated but provides for smoother ride and vehicle handling. This is slowly entering into the Indian
market with the advent of new generation vehicles.
G. HIGH PERFORMANCE PASSENGER CAR RADIAL TYRE
High Performance Passenger Car radial tyres not only have very low aspect ratio (0.65 - 0.35) but also
have substantial changes in construction. Very low aspect ratio enables use of large diameter wheels
which, in turn, allows better stability at high speeds. The tyre contour is based on the cross section of a
fully loaded tyre and this reduces the energy losses within the tyre and reduced dynamic fatigue. High
performance Passenger tyres are made with speed rating up to ZR indicating speed capability in excess
of 240 kmph. In India, this concept has not yet been found popular though customers are demanding
tyres up to 220 km/ph (V Rating).
A new concept of run flat tyre (puncture proof) was introduced by Continental in early 1980s wherein
the basic construction of the rim and bead was changed by which on loosing air the tyre tread sits on the
rim thus enabling one to drive at a reasonable speed for a long distance till the flat tyre could be
attended to.
This revolutionizes the OE need for a new vehicle as the Stepney tyre can also be dispensed off.
However, there is very slow progress of this concept. This has not been tried in India so far.
63
Tremendous work is being carried out towards the development of tyres with modified special
compounds, besides tyre construction aspect, to reduce rolling resistance thus gaining in fuel
consumption. However, the ultimate advantage is obtained by Radial Construction which is gradually
finding its well deserved place in Indian Industry.
J.GREEN TYRE (ENVIRONMENT FRIENDLY)
This is the latest development in Passenger Radial tyres. These tyres have a rolling resistance
appreciably lower than normal tyres. These tyres have high proportion of non petroleum based material
used in their construction and are called environment friendly or green tyres.
This concept is well perceived and will gradually find its application world over, including India.
20
24
Goodyear
2
3
18
4
4
7
Continental
Pirelli
Sumitomo
17
Yokohama
Cooper
Others
64
20
MRF
Apollo tyres
J k inds
17
CEAT
18
Goodyear
Others
Category
OEM Partner
Truck
LCV
Passenger Car
Utility Vehicle
Farm
SHCV
JCB, L&T
Two-wheelers
OTR
So the tyre industry growth has also slowed down. Some manufacturers have even stopped production
altogether. The fact that some of our major customers had reduced production this year due to inventory
build-up, and labor unrest, also has not helped.
The SBM is coping with the crisis effectively. To tide over the crisis, it has expanded its business
interests outside the tyre and rubber industry. It supplies a healthy range of products to the plastics,
optical fiber and power cables, synthetic fibers, pharmaceuticals and security industries as well. This has
effectively mitigated the risks of being dependent on just one industry - especially a cyclical one - such
as tyre and rubber.
The continued political instability, Far Eastern economic crisis, and possible global recession are
complex variables. We do hope, however, that by early 2000, the economy should start improving.
67
CHAPTER 4
FINANCIAL ANALYSIS
68
FILTRATION DETAILS:-
We have selected in Indian tyre industry in top five players based on net sales , gross profit ,
earning per share .those company in three criteria based details is high level compare other
companies as selecting in financial details
69
4.0 INTRODUCTION
The position of finance in business can be matched with the position blood in the human body.
Finance is the life blood of the business. Finance, today is not only limited up to the function that
circulates business but also extended its boundaries. Today success or failure of any business
concerned heavily depends upon how effective finance management a firm has. It is the portfolio
that gives maximum return at minimum cost. Further different parties, both inside and outside of
the firm are interested in financial position of firm and fixed interval they often evaluate
financial position by assessing financial statement of firm.
Provide tools to support the discussion of restoring the project, financial investing so that
funds are available when the needs for repairs arises.
Comparing the 2008-09 to 2012-13 analysis so that changes are transparent and available
for discussion.
Support the 2013-14 financial analysis for future trend analysis and financial
Parameters.
Tools used for financial analysis:There basically four types tools are using in financial analysis
Ratio analysis.
Trend analysis.
70
4.1FINANCIAL STATEMENT OF INDIAN TYRE INDUSTRY:Here we define techniques of analyzing financial statement are as follows.
Table 4.1
Year
(Rs in cr.)
2008-09
2009-10
2010-11
2011-12
2012-13
Indian
tyre
153.02
255.63
507.02
979.8
1918.54
3814.01
3548.45
5791.6
3701.47
6047.23
2288.17
4113.95
7650.55
14902.98 28955.65
1403.77
2574.41
4476.69
8706.36
3691.94
6688.36
7393.41
12735.59 23100.91
8029.13
3959.74
7224.82
4069.39
6995.44
997.35
1713.29
2982.9
5946.24
11652.29 23292.07
498.43
699.41
1330.26
2617.85
5145.95
2106.61
3796.17
6608.06
12996.7
25578.95 51086.49
1560.41
3033.54
5457.03
741.69
1142.78
2183.21
4164.9
8287.81
16520.39
783.62
1371.27
2442.23
4805.04
9413.69
18815.85
5192.33
9343.76
2589.93
4719.73
8701.52
16913.98
33077.7
66002.86
474.62
853.41
1449.11
2880.42
5701.07
11358.63
3064.55
5573.14
10150.63
19794.4
38778.77 77361.49
SOURCES OF FUNDS :
Share Capital
Equity Application Money
Total Shareholders Funds
Secured Loans
Unsecured Loans
Other Liabilities
APPLICATION OF FUNDS :
Gross Block
Less: Impairment of Assets
Lease Adjustment
Capital Work in Progress
Current Assets, Loans &
Advances
Inventories
Sundry Debtors
Cash and Bank
Loans and Advances
Less : Current Liabilities and
Provisions
Current Liabilities
Provisions
Total Current Liabilities
45068.3
57911.3
17161.23 34322.46
88458.97 176757.2
10291.9
71
2127.78
3770.62
6539.9
5.36
10.57
21.14
42.28
79.35
158.7
58.08
105.2
203.68
394.95
768.75
1530.66
362.98
558.94
1101.3
2173.89
4214.96
8412.07
-304.9
-453.74
-897.62
-1778.94
-3446.21
-6881.41
12735.59 23100.91
45068.3
88458.97 176757.2
913.14
1467.35 2627.22
We are taken the all data of balance sheet by average.
5099.11
10130.17 20236.99
7393.41
12767.59 25249.91
50455.8
By using techniques management or any person who knows these techniques can analyze the
financial position with adequate data and interpret it and also deriving conclusion from it.
72
4.2TREND ANALYSIS OF INDIAN TYRE INDUSTRY:Trend analysis is one of the tools for the analysis of the companys monetary statements for the
investment purposes. Investors use this analysis tool a lot in order to determine the financial
position of the business. In a trend analysis, the financial statements of the company are
compared with each other for the several years after converting them in the percentage. In the
trend analysis, the sales of each year from the 2008-2009 to 2012-2013 will be converted into
percentage form in order to compare them with each other.
Trend Analysis is an aspect of technical analysis that tries to predict the future movement of a
stock based on past data. Trend analysis is based on the idea that what has happened in the past
gives traders an idea of what will happen in the future.
Five years figure at Indian tyre industry
Table 4.2
(Rs in crs.)
2008-09
2009-10
2010-11
2011-12
2012-13
19368.25
19582.42
24507.64
31983.78
35479.92
1.10
1.26
1.65
1.83
1251.12
2416.48
2009-10.94
2607.67
3254.64
Index
1.93
1.60
2.08
2.60
PBIT
833.43
1918.94
1462.23
1982.78
2518.56
Index
2.30
1.75
2.37
3.02
PAT
314.25
1121.43
760.71
1101.2
1339.68
Index
3.56
2.42
3.50
3.62
Money
3548.45
5791.6
10466.65
20479.16
40423.55
Index
1.63
2.94
5.77
2.93
Funds
3701.47
6047.23
10973.67
21458.96
42342.09
Index
1.63
2.96
5.79
11.43
153.02
255.63
507.02
979.8
1918.54
Sales turnover
Index
Gross profit
Equity Application
Total Shareholders
Share Capital
73
Index
Work in capital
Index
Provisions
Index
Net Current Assets
Index
1.67
3.31
6.4
12.53
997.35
1713.29
2982.9
5946.24
11652.29
1.71
2.99
5.96
11.68
474.62
853.41
1449.11
2880.42
5701.07
1.79
3.05
6.06
12.021
2127.78
3770.62
6539.9
12767.59
25249.91
1.77
3.07
6.0
11.88
40000
35000
30000
25000
20000
sales turnover
15000
10000
5000
0
2008-09
2009-10
2010-11
2011-12
2012-13
74
1600
1400
1200
1000
800
PAT
600
400
200
0
2008-09
2009-10
2010-11
2011-12
2012-13
75
share capital
2500
2000
1500
share capital
1000
500
0
2008-09
2009-10
2010-11
2011-12
2012-13
INTERPRETATION:
In the graph on the X-axis years is mention and on the Y-axis share capital is mention in crores.
The share capital of tyre industries has consistently increasing from 2008-09 to 2012-13.
4.2 COMMON SIZE INCOME STATEMENT OF INDIAN TYRE INDUSTRY:Common size income statement is of tools for the easily analysis of companys monetary
statement for the incomes and expences analysis purpose. Use this analysis tools a financial
position of business. Easily future forecasting Expences and incomes.
Table 4.3
Particular
Revenue
(Rs in crs.)
2008-09
2009-10
2010-11
2011-12
2012-13
Total
17500.66
18046.47
23526.67
30124.38
32455.90
121654.1
76
Less : COGS
16249.54
15629.99
21515.73
27516.71
29201.26
110113.2
Gross profit
1251.12
2416.48
2010.94
2607.67
3254.64
11540.85
Less:
417.69
497.54
548.71
624.89
736.08
2824.91
PBIT
833.43
1918.94
1462.23
1982.78
2518.56
8715.94
Less : interest
393.80
326.20
428.31
712.86
830.25
2691.42
PBT
439.63
1592.74
1034.04
1269.92
1688.31
6024.64
Less : tax
125.38
471.31
273.33
168.72
348.63
1387.37
PAT
314.25
1121.43
760.71
1101.2
1339.68
4637.27
depreciation
77
4.2 RATIO ANALYSIS:Ratio broadly speaking, is the numerical relationship between to numbers, and hence ratio
analysis of statement stands for the process of determining and presenting the relationship of
items and groups of items in the statement
The ratio analysis is one of the most powerful tools of the analysis. It is used as a device to
analysis and interpret the financial statement can be analyze more clearly and decision made
from such analysis.
The use of ratio is not confined to financial manager only. There are different parties in ratio
analysis for knowing the financial position of the firm for different purposes. The supplier of
goods on credit, banks, financial institution, investor, shareholder and management make use of
ratio analysis as a tool in evaluating the financial position and performance of a firm for granting
credit, providing loans for making investment in the firm. Thus, ratios have wide application and
are of immergence use today.
The relationship of one item to another expressed in a simple mathematical form is known as the
Ratio.
The relationship can be expressed as:
1. Percentage
2. Times
3. Proportion of numbers
4. Days
Ration is used as benchmark for evaluating the financial position and the performance of the
company. Ratio helps to summaries the large quantities of financial data and to make qualitative
judgment about the financial performance of the company. Ratio in general, is a statistical
yardstick by means of which the relationship between figures can be compared and measured.
Ratio analysis is a widely used tool of financial analysis. It is defined as the systematic use of
ratio to interpret the financial statement so that the strengths and weaknesses of a firm as well as
its historical performance and current financial can be determined.
78
Table 4.4
Apollo
MRF
CEAT
Jk Tyre
Good year
Total
Average
2008-09
2.07
337.55
2.79
12.93
355.34
71.068
2009-10
8.11
592.52
46.35
39.23
30.49
716.70
143.34
2010-11
3.85
826.56
6.2
14.45
31.29
882.35
176.47
2011-12
3.52
1456.82
2.04
2.27
26.89
1,491.54
298.30
2012-13
6.11
1,345.83
30.38
25.11
23.28
1,430.71
286.14
79
350
300
250
200
eps
150
100
50
0
2008-09
2009-10
2010-11
2011-12
2012-13
INTERPRETATION:
In the graph on the X-axis years is mention and on the Y-axis Earning per share are mention in
rupees. The earnings per share ratio of Indian tyre industry are continually increased from 200809 to 2011-12 and the ratio of MRF and Good year is decline in 2012-13. The increase the EPS
because of the company did not issue new equity share but increase the Net profit of the
company through the maximum utilization of available resources of the company. From the
above data we can say that Indian tyre industry is performing very well.
80
The TANDON committee appointed by the RBI Had recommended a current ratio of 2:1. But later on the
view of CHORE committee appointed by the RBI. Recommended a satisfactory current ratio of 1.33:1.
The formula of calculating current ratio is as under:
2008-09
2009-10
2010-11
2011-12
2012-13
Apollo
MRF
CEAT
Jk Tyre
Good
year
Total
1.06
1.43
1.14
0.78
1.13
5.54
0.99
1.52
1.16
0.78
1.19
5.64
0.76
1.75
0.89
0.81
1.22
0.72
1.48
0.75
0.84
1.26
5.43
5.05
0.78
1.43
0.73
0.85
1.33
5.12
Average
1.108
1.128
1.086
1.01
1.024
81
1.14
1.12
1.1
1.08
1.06
1.04
average.current ratio
1.02
1
0.98
0.96
0.94
2008-09
2009-10
2010-11
2011-12
2012-13
INTERPRETATION:
In the graph on the X-axis years is mention and on the Y-axis average current ratio are mention
in times. From the above data we can say that current ratio of tyre industries has increased in the
year 2009-10. And then started declining which is not good for the tyre industries.
82
Apollo
MRF
CEAT
Jk Tyre
Good year
Total
Average
2008-09
3.17
4.19
0.56
1.26
17.35
26.53
5.306
2009-10
7.76
6.78
4.31
3.65
29.49
51.99
10.398
2010-11
2.62
9.47
1.41
2.07
30.34
45.91
9.182
2011-12
2.04
5.90
1.07
1.07
19.47
29.55
5.91
2012-13
2.78
6.25
1.89
1.88
23.15
35.95
7.19
12
10
8
intesr covereg
ratio
6
4
2
0
2009
2010
2011
2012
2013
83
INTERPRETATION:
In the graph on the X-axis years is mention and on the Y-axis average interest coverage ratio are
mention in times..A higher ratio is desirable, but too high a ratio indicate that the company is
very conservative in using debt, and that it is not using credit to the best advantage of
shareholders
The interest coverage ratio of nestle is decreased in the 2010-11 from 1,061.30 times to 154.2
times because of nestle increase the debt from 0 rs to 970.87 crores.
When a company interest coverage ratio is 1.5 or lower, its ability to meet interest expenses may
be questionable but an interest coverage ratio below 1 indicate the company is not generating
sufficient revenue to satisfy interest expenses.
Interest ratio of lotus is below from last two year then we can say that the company has not
abilities to pay interest expenses
A lower ratio indicates excessive use of debt for inefficient operation.
84
* 100
Table 4.7
Apollo
MRF
CEAT
Jk Tyre
Good year
Total
Average
2008-09
13.37
13.25
4.46
9.63
37.18
77.89
15.578
2009-10
28
21.23
25.82
22.64
62.53
160.22
32.04
2010-11
12.79
23.54
9.67
10.99
47.88
104.87
20.97
2011-12
12.60
14.83
11.45
7.24
33.88
80
16
2012-13
17.14
19.29
19.80
12.53
25.23
93.99
18.79
35
30
25
20
Average. ROCE
15
10
5
0
2008-09
2009-10
2010-11
2011-12
2012-13
INTERPRETATION:
In the graph on the X-axis years is mention and on the Y-axis average Return on capital
employed ratio is mention in percentage. The return on capital employed shows a considerable
increase in returns. Return on capital Employed ratio also indicates that the company is earnings
sufficient revenues and profits in order to make the best use of its capital assets. From the above
data we can say that the return on capital employed ratio of tyre industries has increased in the
year 2009-10 as compare to2008-09 and then started declining.
4.3.5 RETURN ON NET WORTH:
The net worth states the return that shareholder could receive on their investment in a company,
if all of the profit earned were to be passed through directly to them. Thus the ratio is developed
from the perspective of the shareholder, not the company, and is used to analyze investor returns.
The ratio is useful as a measure of well a company is utilizing the shareholder investment to
create returns for them and can be used for comparison purposes with competitors in the same
industry.
To calculate the net worth ratio, first compile the net profit generated by the company. The profit
figure used should have all financing costs and taxes deducted from it , so that it accurately
reflects the profit available to shareholder. This is the numerator in the formula. Next, add
together the capital contribution made by shareholders, as well as all retained earnings; this is the
denominator in the formula.
86
Apollo
MRF
CEAT
Jk Tyre
Good year
Total
Average
2008-09
8.37
13.72
-3.28
3.12
21.56
43.49
8.698
2009-10
26.98
20.39
28.95
31.71
39.63
147.66
29.532
2010-11
10.97
23.20
4.31
11.56
31.23
81.27
16.254
2011-12
9.21
17.47
1.36
1.57
22.23
51.84
10.368
2012-13
14.26
22.20
17.16
17.94
16.95
88.51
17.702
35
30
25
20
RONW
15
10
5
0
2008-09
2009-10
2010-11
2011-12
2012-13
INTERPRETATION:
In the graph on the X-axis years is mention and on the Y-axis average Return on net worth is
mention in percentage. An excessively high net worth ratio may indicate that a company is
funding its operation with a disproportion amount of debt and trade payables. If so, a decline in
its business could results in the inability to pay back the debt, which increase the risk of
bankruptcy, this means that the shareholder may lose their investment in the company..
87
From the above data the return on net worth of tyre industries has increased in the year 2009-10
as compare to 2008-09 which can be consider a good year for share holder. And then started
declining
The year 2011-12 is not a good year for share holder as compare to other year except 2008-09.
MRF
CEAT
2008-09
2.68
2.56
2.15
2009-10
2.56
2.38
2.41
2010-11
2.10
2.65
2.41
2011-12
2.46
2.96
2012-13
2.27
2.94
Jk Tyre
Good year
Total
Average
1.77
3.98
13.14
2.628
1.72
4.00
13.07
2.614
2.06
4.79
14.01
2.802
2.42
2.22
4.83
14.89
2.978
2.50
1.86
4.21
13.78
2.756
88
3.1
3
2.9
2.8
FATR
2.7
2.6
2.5
2.4
2008-09
2009-10
2010-11
2011-12
2012-13
INTERPRETATION:
In the graph on X-axis years is mention and on the Y-axis average fixed assets turnover ratio are
mention in times
The formula is useful in analyzing growth companies to see if they are growing sales in
proportion to their assets bases. The fixed assets turnover ratio really has little meaning except
when it is put in the context of industrial averages and consideration is made whether new
capital expenditures recently undertaken were such that they could skew the ratio. For example,
the turnover ratio will be lower just after a significant amount of fixed asset is acquired to
upgrade or expand the plant facilities.
Fixed Assets Turnover Ratio which indicates under-utilization of fixed assets. From the above
data we can say that the performance of the tyre industries has increased, decreased curve..
which means it doesnt remain constant neither increased nor decreased.
89
Table 4.10
Apollo
MRF
CEAT
2008-09
9.78
6.81
9.32
2009-10
11.19
7.51
9.56
2010-11
7.11
9.18
7.77
2011-12
7.94
8.07
2012-13
8.48
8.24
Jk Tyre
Good year
Total
Average
7.98
14.75
48.64
9.728
9.05
17.36
54.67
10.934
9.17
24.38
57.61
11.522
8.42
8.86
22.08
55.37
11.074
9.63
8.16
17.01
51.52
10.304
90
12
11.5
11
10.5
10
I.T.R
9.5
9
8.5
2009-10
2010-11
2011-12
2012-13
INTERPRETATION:
In the graph on X-axis years is mention and on the Y-axis average Inventory turnover ratio is
mention in times. A high inventory turnover ratio implies either strong sale. A high inventory
turnover ratio can indicate better liquidity. From the above data we can say that the inventory
turnover of tyre industries has increased consistently from the year 2008-09 to till 2011-12. And
then declined in the year 2012-13.
91
MRF
CEAT
Jk Tyre
Good year
Total
Average
8.37
13.72
-3.28
3.12
21.56
43.49
8.698
26.98
20.39
28.95
31.17
39.63
147.12
29.424
10.97
23.2
4.31
11.56
31.23
81.27
16.254
9.21
17.47
1.36
1.57
22.23
51.84
10.368
14.26
22.2
17.16
17.94
16.95
88.51
17.702
35
30
25
20
ROE
15
10
5
0
2008-09
2009-10
2010-11
2011-12
2012-13
92
INTERPRETATION:
In the graph on X-axis years is mention and on the Y-axis average return on Equity ratio mention
in percentage
From the above table and graph it shows that Return on Equity of tyre industries has increased in
the year 2009-10 as compare to the year 2008-09. And then started decline in the year 2011-12.
And in the year 2012-13 Return on equity increased but remains average as compare to the year
2008-09 and 2011-12.
4.3.9 DEBT EQUITY RATIO
This ratio also termed as External - Internal Equity Ratio. This ratio is calculated to ascertain the
Firms obligations to creditors in relation to funds invested by the owners. The ideal Debt Equity
Ratio is 1: 1. This ratio also indicates all external liabilities to owner recorded claims. It may be
calculated formula is debt / equity.
Table 4.12
Apollo
2008-09
2009-10
2010-11
2011-12
2012-13
MRF
CEAT
Jk Tyre
Good year
Total
Average
0.24
0.99
1.14
2.48
4.85
1.2125
0.43
0.77
1.17
1.9
4.27
1.0675
0.48
0.66
1.28
1.79
4.21
1.0525
0.54
0.74
1.74
2.45
5.47
1.3675
0.59
0.64
1.63
3.06
5.92
1.48
93
1.6
1.4
1.2
1
0.8
D/E ratio
0.6
0.4
0.2
0
2008-09
2009-10
2010-11
2011-12
2012-13
94
MRF
CEAT
Jk Tyre
Good year
Total
Average
37.54
9.84
8.33
8.34
8.68
72.73
14.546
48.27
10.32
8.60
8.51
10.66
86.36
17.272
2010-11
35.11
11.61
8.83
8.81
14.03
78.39
15.678
2011-12
31.35
10.04
8.82
7.59
14.18
71.98
14.396
2012-13
29.68
9.45
8.56
6.72
11.32
65.73
13.146
2008-09
2009-10
debt turnover
2008-09
2009-10
2010-11
2011-12
2012-13
95
INTERPRETATION:
In the graph on the X-axis years is mention and on the Y-axis debtor turnover ratio is mention in
times. From the above table and graph it shows that Debtors turnover ratio has increased in the
year 2009-10 as compare in the year 2008-09. And started declining.
Table 4.14
Apollo
2008-09
2009-10
2010-11
2011-12
2012-13
MRF
CEAT
Jk Tyre
Good year
Total
Average
7.65
7.82
2.78
5.77
6.66
30.68
6.136
14.92
11.67
11.31
10.72
11.97
60.59
12.118
9.56
10.62
4.44
5.33
9.44
39.39
7.878
7.75
11.64
5.64
4.76
7.48
37.27
7.454
10.17
9.9
7.82
7.82
6.98
42.69
8.538
Gross Profit Ratio established the relationship between gross profit and net sales. This ratio is
Calculated by dividing the Gross Profit by Sales. It is usually indicated as percentage.
Gross Profit Ratio= gross profit / net sale *100
Higher Gross Profit Ratio is an indication that the firm has higher profitability. It also reflects the
effective standard of performance of firm's business.
96
14
12
10
8
gross profit
6
4
2
0
2008-09
2009-10
2010-11
2011-12
INTERPRETATION:
In the graph on the X-axis years is mention and on the Y-axis average gross profit are mention in
crores. From the above table and graph it shows that gross profit/sales has increased in the year
2009-10 as compare in the year 2008-09. And started declining which is not good for the growth
of the tyre industries.
97
CHEPTER 5
BUSINESS PLAN
98
The Indian tyre industry has witnessed a CAGR of 7.7 per cent over the last decade. The demand and
growth for the tyre industry depends on primary factors like overall GDP growth, agricultural as well as
industrial production and growth in vehicle-demand. It also depends on the on secondary factors like
infrastructure development and prevailing interest rates.
The Indian tyre industry is two tiered; Tier-I players (top 5 tyre companies), account for over 80% of
industry turnover and have a well diversified product-mix and presence in all three major segments, i.e.,
replacement market, original equipment manufacturers (OEM's) and exports. Tier-II companies are
small in size, mainly concentrating on production of small tyres (for two/ three-wheelers, etc.), tubes &
flaps and the replacement market. Tyre industry is highly raw-material intensive, with raw material
costs accounting for 70 per cent of the cost of production.
The export market for India has been predominantly to the USA that accounts for nearly 30% of exports
from the country. Apart from that India exporting tyre in more than 50 countries.
The main threat to the industry is the price of its raw materials, most of which are petroleum byproducts. Carbon, synthetic rubber and nylon tyre cord are offshoots of petrochemicals. Thus, the future
of the industry will swing with the supply of crude oil.
In the domestic market, tyre manufacturers are expected to increasingly focus on expanding their
dealership networks & explore possibilities of tie-ups among themselves to penetrate the growing
customer base. They are also likely to pursue innovative measures (such as "dial-a-tyre service and road
shows) to improve customer awareness.
99
Overall Indian Tyre Industry is enjoying the fruits of more sales in the replacement market when the
input cost is comparatively lower. Since the commercial vehicles replace tyres twice a year, we have
received the full impact of the price rises affected during the first and second quarter of the last year.
the project. The project may help in checking the destruction of rubber.
LOGO:
100
PARTNERS :
Krushnkant Patel
Anand Patel
Ashish Patel
Kinjal Patel
Chirag Patel
M.jinesh jose
101
5.3 VISION:
To become the leading king in the tyre remolding services providers in Gujarat state in coming
years.
5.4 MISSION:
To obtain and empower the consumers loyalty towards our company by giving them best
service and best quality.
No
OF
PERSON
1
1
1
10
1
2
2
1
1
20
SALARY
17000
13500
11000
8500
6000
4500
3000
6000
7500
Total
salary
17000
13500
11000
85000
6000
9000
6000
6000
7500
Yearly
salary
204000
162000
132000
1020000
72000
108000
72000
72000
90000
1932000
102
103
Market Growth
As we know that Indian economy is growing rapidly and Transportation business is one of the
key important sector in our economy so the transportation business also increasing rapidly
sector is highly growing and the market of transportation vehicle is also a very high so the
market growth is very high.
Market Needs
The market suffers from a lack of service oriented with work station who provide a good value
for money. The market needs a type of work station that values the customer as its number one
priority.
Main Competitors: Competition comes from major chains and from various
independents.
1) By defining our customers are, who has having any type of any kind of transportation vehicle
like luxury, buses, LCV etc all these vehicle owner are falling in the category in the our customer
.
2) Organization structure of our company is Our organization structure is very much simple it
start with the top management and then comes the middle level management and last different
departments like HR, Marketing, Finance.
104
ORGANIZATION STRUCTURE
GENERAL MANAGER
WORKSHOP MANAGER
FACTORY HEAD
EMPLOYEES
Our organization chart show the flow of authority and responsibility in our company follows. In
our organization the top management takes the decision of all kind of the purchasing of raw
material and other required decision. The work allocation base is skills and education. According
to their skills and education they are having.
1) raw material:
In our business the main raw material is rubber because the remolding process required the
rubber for the covered the surface of tyre with the rubber and make new design on the tyre for
the superior grip on the road.
2) Supplier:
Supplier of the scrap tyre from the damaged tyre and it will be used for remolding the tyre.
106
MARKETING STRATEGIES
Pricing
Develop profitable pricing strategies by analyzing all the factor like competitor pricing
strategy, market situation and most important factor that is quality service provided to the
customer.
As we mentioned earlier that customer satisfaction and quality service provided to the
customer at a greater value.
Promotional
For promotional of our work station we can give the advertisement in the leading news
paper like Sandesh, Gujarat samachar etc.
Foe using the hoardings on the road in the market where the crowed is high. We can put the
hoardings near the petrol pumps so the all the commercial vehicle owner can know about
our work station.
107
Sr. No
1.
Description
Amount
Service equipment
a. Tyre retreading machine
15,70,000
80,000
c. Polishing machine
75,000
1,60,000
8,000
1,30,000
80,000
c. office furniture
2,00,000
d. water purifier
15,000
Total other fixed assets 4,25,000
23,18,000
108
Partners capital
18,00,000
12,00,000
Total capital
30,00,000
109
1st year
2nd year
3rd year
40,00,000
42,00,000
47,00,00
54,000,00 68,00,000
40,00,000
42,00,000
47,00,00
54,000,00 68,00,000
Rent
3,60,000
3,72,000
3,84,000
3,84,000
Salary
19,32,000
Electricity
1,90,000
1,95,000
1,98,000
2,10,000
2,12,000
Municipal tax
35,000
35,000
35,000
35,000
35,000
Advertisement
50,000
65,000
65,000
78,000
78,000
Stationary
55,000
55,000
61,000
61,000
64,000
Training
50,000
45,000
41,000
30,000
30,000
Uniform
35,000
--------
42,000
---------
48,000
Telephone
19,000
25,000
31,000
42,000
44,000
Bank charges
65,000
65,000
65,000
65,000
70,000
Particulars
4th year
5th year
110
Depreciation on
3,47,700
295545
251213
242031
280876
Insurance
85,000
85,000
85,000
85,000
85,000
Misc.expences
87,000
88,000
90,000
90,000
90,000
Professional tax
5000
5000
5000
5000
5000
Maintenance
4,60,000
4,30,000
4,40,000
4,90,000
5,15,000
2,24,300
3,80,000
7,06,787
12,82,969 35,27,714
Less : interest
1,80,000
1,80,000
1,80,000
1,80,000
44,300
2,00,000
5,26,787
11,02,969 33,47,714
14,619
66,000
1,73,840
3,63,980
11,04,745
29,681
1,44,000
3,52,947
7,38,989
22,42,969
machinery
& tax:1,80,000
111
1st year
2nd year
3rd year
4th year
5th year
Krushnkant Patel
300000
300000
30000
300000
300000
Anand Patel
300000
300000
30000
300000
300000
Ashish Patel
300000
300000
30000
300000
300000
Kinjal Patel
300000
300000
30000
300000
300000
Chirag Patel
300000
300000
30000
300000
300000
M.jinesh jose
300000
300000
30000
300000
300000
Particulars
Partners capital
1800000
1200000
bank)
Reserve and surplus
Profit and loss ac
------
29,681
1,73,681
5,26,628
12,65,617
29,681
1,44,000
3,52,947
7,38,989
22,42,969
-100000
-500000
Assets
Fixed assets
Tyre retreading
15,70,000
machine
112
80,000
-90000
1,60,000
8,000
Furniture
2,00,000
Computers
1,30,00
Water purifier
15,000
80,000
television
Total fixed assets
2318000
1970300
1674755
1613542
1872511
Less : depreciation
347700
295545
251213
242031
280876
1970300
1674755
1423542
1372511
1591635
250000
740000
860000
760000
1046000
300000
455000
399700
550000
1190000
1259700
1216000
1516000
Total assets
5549981
6038436
6209870
66,64,128
9115948
@15%
Total
Current assets
456000
470000
113
Particulars
A. Cash flow of
operating activities
PBIT
2014-15
2015-16
2016-17
2017-18
2018-19
2,24,300
3,80,000
7,06,787
12,82,969
35,27,714
+ depreciation
347700
295545
251213
242031
280876
-Direct tax
14,619
66,000
1,73,840
3,63,980
11,04,745
557381
609545
784160
1161020
-2318000
-1970300
-1674755
-1613542
2703845
-1872511
-2318000
-1970300
-1674755
-1613542
-1872511
1200000
1200000
1200000
1200000
1200000
Interest paid
-1,80,000
-1,80,000
-1,80,000
-1,80,000
-1,80,000
1080000
1080000
1080000
1080000
1080000
-680619
-280755
189405
627478
1911334
550000
1190000
1259700
1216000
1516000
-130619
909245
1449105
1843478
3427334
B. cash flow of
investing activities
Net cash outflow
114
CHAPTER 6
CONCLUSION
115
CONCLUSION
The growing economy and the infrastructure sectors provide the much-needed force. However, tyre
companies face competition, together with price and cost pressures. Pricing pressure, from OEMs
because of their high bargaining power and in the replacement market due to huge competition, is a
substantially reduce. Companies are now giving emphasis to innovation in product and process
technology and to operational efficiencies. However, the continuously rising trend witnessed in the
prices of raw materials remains an area of concern.
Tyre companies would definitely show improvement in the margins, sequentially, and if prices remain
at these levels, profitability would improve. But then, it is highly dependent on the prices of major raw
materials like Rubber, Carbon Black, NTC Fabric, SBR and PBR, which are highly volatile. However,
with surging automobile sales, if demand for tyres increases without the supply catching up with it,
then, prices of tyres are likely to increase. This may provide some benefit to the tyre companies.
The industry is definitely set to grow, but the huge competition, huge buyer power, and pricing
inflexibility and cost pressures. Tyre companies are operating at very thin margins and their return ratios
are also not attractive.
Currently India exports tyres to around 65 countries and this is expected to increase significantly during
the current financial year. Though the growth has been lower than when overall growth was around 7
per cent, there is nothing to worry about as couples of companies are in expansion mode and also they
are catering to the increasing domestic needs.
The consolidation of the Indian tyre industry is likely to continue in the coming years through mergers
among existing players. The industry is likely to expand through a combination of organic and inorganic
growth. While organic growth would come from raising efficiency levels, inorganic growth would be
achieved.
The main threat to the industry is the price of its raw materials, most of which are petroleum byproducts. Carbon, synthetic rubber and nylon tyre cord are offshoots of petrochemicals. Thus, the future
of the industry will swing with the supply of crude oil.
116
In the domestic market, tyre manufacturers are expected to increasingly focus on expanding their
dealership networks & explore possibilities of tie-ups among themselves to penetrate the growing
customer base. They are also likely to pursue innovative measures (such as "dial-a-tyre service and road
shows) to improve customer awareness.
According to estimates, major tyre companies in the country export about 20 per cent of their truck tyre
production and the continuous up gradation of quality has resulted in greater acceptance level for Indian
tyres in various countries.
The biggest threat, however, is yet to fully materialize. It will be from global majors like Apollo, MRF,
JK which control 36 per cent of the global tyre market. These players have set up their bases in
Southeast Asia and the slump of the markets in this region, coupled with the vast growth potential of the
Indian market, is attract them towards India.
Overall Indian Tyre Industry is enjoying the fruits of more sales in the replacement market when the
input cost is comparatively lower. Since the commercial vehicles replace tyres twice a year, we have
received the full impact of the price rises affected during the first and second quarter of the last year.
117
In this report we are assuming that selected five companies are representing the whole
industry but it may not be.
We select five companies on the basis of available financial data but it may be possible
that major companies remain unconsidered because of lack of financial data.
Here we selected five major companies on the basis of only net profit ratio so it may be
possible that other parameters of the other companies are good compare to selected
companies.
In the strategic analysis of the Indian Tyre Industry we used strategic analysis tool call
Strategic Grouping Mapping and competitive profile matrix in which we give weights
and ratings to opportunities, threats and critical success factor as per our understanding.
In the PEST and Porters five force analysis we include all possible variables as per our
understanding but there may be chances of missing some variable.
We try our best effort to apply all possible strategic tools and financial data to study the
performance of Indian Tyre Industry but it may possible that some portion of the
industry remain unanalyzed.
118
CHAPTER 7
BIBLIOGRAPHY
119
BIBLIOGRAPHY
BOOKS:
By,
Thomsan Arthur, A. J Strickland, Gamble E John, Arun K. Jain
Crafting and Executing Strategy( Special Indian Edition), 14th Edition, TMH Production.
WEB SITES:
www.way2wealth.com
www.indiainfoline.com
www.atmaindia.com
WEB LINKS:
http://www.atmaindia.org/Export.htm
http://www.atmaindia.org/Radialisation.htm
http://www.atmaindia.org/Redreading.htm
120