Altivar 61 Plus
Selection guide for 90 ... 2400 kW
General remarks
The following symbols should assist you in handling the instructions:
Advice, tip !
The requirements for successful commissioning are correct selection of the device, proper planning and installation. If you have any further questions, please
contact the supplier of the device.
Capacitor discharge !
Before performing any work on or in the device, disconnect it from the mains and wait at least 15 minutes until the capacitors have been fully discharged to
ensure that there is no voltage on the device.
Automatic restart !
With certain parameter settings it may happen that the frequency inverter restarts automatically when the mains supply returns after a power failure. Make sure
that in this case neither persons nor equipment is in danger.
Terms of delivery
The latest edition "General Terms of Delivery of the Austrian Electrical and Electronics Industry Association" form the basis of our deliveries and services.
Basis of contract
The specifications in text and drawings of this document are no subject of contract in the legal sense without explicit confirmation.
Regulations
The user is responsible to ensure that the device and its components are used in compliance with the applicable regulations. It is not permitted to use these
devices in residential environments without special measures to suppress radio frequency interferences.
Trademark rights
Please note that we do not guarantee that the connections, devices and processes described herein are free from patent or trademark rights of third parties.
Copyright
Layout, equipment, logos, texts, diagrams and pictures of this document are copyrighted. All rights are reserved.
Content
Altivar 61 Plus
Engineered Drives
Altivar 61 Plus
Selection guide for 90...2400 kW
Content
Engineered Drives
Overview
Altivar 61 Plus
Engineered Drives
Overview
Type of machine
Complex machines
Power range
0.37...800 kW
0.37...630 kW
Voltage ranges
Interfaces
Protection degree
Further reading
Output frequency
Control method
Overview
Altivar 61 Plus
Engineered Drives
Type of machine
Brief description
Power ranges
ATV61EXN4
901400 kW
ATV71EXN4
901300 kW
ATV61EXN
901800 kW
ATV71EXN
901500 kW
ATV61EXY
1102400 kW
ATV71EXY
1102000 kW
ATV61EXN4
ATV71EXN4
ATV61EXN
ATV71EXN
ATV61EXY
ATV71EXY
Voltage ranges
Output frequency
0.5 500 Hz
Control method
0.5 500 Hz
V/f characteristic (2 or 5 points),
vector-oriented flux control with/without encoder,
ENA system
Interfaces
Protection degree
Further reading
Enclosure design
Altivar 61 Plus
Engineered Drives
Enclosure design
Device features
Enclosure system
The Sarel S6000 enclosure system with additional internal reinforcement
elements and slide bars for easy installation and removal of the inverter
devices and other power components can be added to any existing enclosure
systems.
Operation / parameterization
For safe control, clear parameterization and fast diagnosis, the operating panel
is installed in the enclosure door at an ideal height. A transparent protective
cover and an adjustable locking code prevent the unintended parameter
adjustments.
Displays on the enclosure
Permanently present status displays that show the actual device state at any
time.
Up to 5 analog actual values can be parameterized for the display thus provide
information on the relevant drive data at any time.
Connection
Generous space is provided to connect the power cables. The extensibility and
accessibility of the control terminals is also taken into consideration.
In the standard design, the cables are to be connected at the bottom of the
inverter.
Extensibility
All enclosure units are equipped with a large, swivelling control panel which
permits subsequent extensions.