Simba 364-ITH
Technical specification
Production drilling rig with pneumatic in the hole hammer, ITH, for
deep straight holes. Ring drilling with parallel holes upwards/downwards up to 3 m apart. Hole diameter 90165 mm.
Standard features
ITH-hammer
Pneumatic in the hole hammer, ITH (hammer not
supplied with rig)
Rotation unit DHR 6
Drilling unit
Mechanized rod handling system
Feed with hydraulic two-stage cylinder
Front- and rear-mounted stingers
Breakout table for guidance during collaring and
as support during rod handling
Positioning unit
Tilt, rotation, pendulum arm and slide table
Accurate and smooth movements
Mine-adapted, sturdy components
Control system
Electrical Direct System (EDS)
Anti-jamming system
Carrier
Mine-adapted carrier for small- to medium-sized drifts with
articulated steering and four-wheel drive
General
Trolley-mounted operator panel
FOPS-approved protective roof
Electrical cable reel
Working lights on tripods
Simba 364-ITH
Specifications
ROTATION UNIT
DHR 6H
56
Length with fixed adapter
Length with floating adapter
Torque, max.
Rotation speed
Adapter fixed
Adapter floating
Weight with/without floating sub
DHR 6H
68
530 mm
840 mm
6 000 Nm
0107 rpm
068 rpm
API 23/8 or API 3 Reg fem
FLT API 23/8 or 3 Reg fem
243/182 kg
FEED
BMH 200-series
Total length
Drill steel length
Total length with extractor
BMH 235
BMH 236
3 200 mm
3 510 mm
1 500 mm
1 800 mm
3 500 mm
3 810 mm
Drilling unit
Rod Handling System, RHS 27...............................27+1 pipes
Adaptable to 5 and 6 pipes
Adaptable to 76 and 89 mm drill pipes
Mechanized drilling up to 51 m
Positioning system
Feed extension (with 4 drill pipe).............................. 900 mm
Feed extension (with 5 and 6 drill pipe)................. 1 200 mm
Rotary Acurator BHR 602 for 360 ring drilling
Sliding table BHT 150 gives 1.5 m feed parallel positioning
Pendulum arm, BHP 150 gives 1.5 m feed parallel positioning
in the side walls. Adds additional 1.5 m feed parallel positioning upwards/downwards.
Stinger backward on feed . ......................................BSJ 8-200
Stinger forward on feed . ......................................... BSJ 8-115
Feed dump, drilling...............+20 forward and -65 backward
Rig Alignement Laser ................................................RAL650
Control system
Electrical Direct System, EDS
Basic functions such as semi-automatic drilling and anti-jamming included
Power pack
Hydraulic pump for rotation, positioning, feed
Pumps unloaded at start
System pressure, max................................................... 250 bar
Hydraulic oil tank, volume max/min............................... 160 l
Low oil level indicator
Oil temperature gauge on oil tank
Electrical oil filling pump
Filtration, absolute.......................................................... 16 m
Oil filter indicator
Water cooled oil cooler in stainless steel
Mineral hydraulic oil
Electrical system
Total installed power......................................................65 kW
Main motor at 50 Hz......................................................55 kW
Voltage..................................................................3801 000 V
Frequency..................................................................5060 Hz
Starting method..........star/delta (380690 V) direct (1 000 V)
Thermal overload protection for electric motors
Percussion hour meters on A-panel
Digital volt/amperage meter in electric cabinet
Phase sequence indicator
Earth fault indicator
Battery charger
Transformer.....................................................................4 kVA
Cable reel
Limit switch for cable reel
Working lights on tripods................................2 x 200 W, 24 V
Air system
2-inch system
High and low percussion
HECL lubrication system with electric filling pump
Air pressure gauge and air flow guard
Water system
Water injection pump
Capacity............................................................... max 50 l/min
Min water inlet pressure................................................... 2 bar
Hydraulic drive, axial piston motor ................................ 10 cc
Water pressure gauge
Carrier
Deutz 4-cylinder D914 L04, EPA III/COM III (Tier 3/Stage
IIIA) approved 4-stroke prechamber diesel engine
Power rating at 2 300 rpm................................. 55 kW (75 hp)
Torque at 1 500 rpm ....................................................270 Nm
Fixed seat for tramming, including safety belt
Articulated steering................................... 41 steering angle
Four-wheel drive
FOPS-approved protective roof
Hydrostatic power steering system
Hydrodynamic transmission............................... Clark T12000
Front axle ................................................................. Dana 176
Rear axle........................................... Dana 176, 8 oscillation
Automatic differential lock on front axle, limited slip
Tyres......................................................................12.00 x R20
Clearence outside axles....................................................... 15
Hydraulic jacks, front........................................... 2 extendable
Hydraulic jacks, rear...............................................................2
Service brakes .2 separate circuits (hydraulically applied, fully
enclosed wet disc brakes)
Emergency and parking brakes......................................SAHR
Fuel tank, volume............................................................... 60 l
Electric system..................................................................24 V
Batteries.....................................................................2 x 70 Ah
Tramming lights......................................................... 8 x 70 W
Brake lights
Illuminated stairs for platform
Central lubrication system
Silencer and catalyser
Fire extinguisher
Spirit levels
Gradeability at max load on drive wheels........................... 1:4
Tramming speed on flat ground................................ >10 km/h
Tramming speed on incline 1:8................................... >4 km/h
Horn, beacon and reverse alarm
Outlet for communication radio........................................12 V
Simba 364-ITH
Specifications
DRILL STRING
ITH-hammer
Hole diameter, mm
Drill pipes, mm
Pipe length, mm
Thread pin/box
COP 44 Gold
110130
89
1 500/1 800
COP 54 Gold
134-152
89
1 500/1 800
COP 64 Gold
156165
102
1 500
Optional equipment
Drilling system
ITH lubrication surveillance system
Floating sub
Positioning system
Additional stinger backward on feed, BSJ 8-200 (stroke
length 2 000 mm
Automatic lubrication for positioning/drilling system
Central lubrication for positioning/drilling system
Thread lubrication kit
Angle reading instrument (ARI 6 C), with or without hole
depth measurement
Carrier
Fire suppression system ANSUL (manual, Checkfire
or automatic)
Manual spotlight
Electrical system
Electrical cable on reel, Buflex
Plug PC4
Socket PC4
Switch gear
Working lights on tripods, 2 x 500 W, 230 V
Electrics according to local standards
Water system
Waterhose reel
Miscellaneous
Manual rig washing kit
Manual lubrication kit
Shelf for drill bits and tools
Rig washing kit
Simba 364-ITH
Measurements
SIDE VIEW
700
1845
2260
3180
2304
1555
1500
8763 (with BMH 264)
2310
1500
750
1150
750
945
COVERAGE AREA
45
255
45
2000
1950
2380
2430
TURNING RADIUS
depending on surface
Voltage
mm
Outer
5 440
Inner
2 890
DIMENSIONS
mm
Type
Dimension, mm2
Diameter,
mm
Length,
m
380400 V
Buflex
3x70+3G16+2x1.5
37 mm
95 m
440575 V
Buflex
3x50+3G10+2x1.5
32 mm
140 m
Width
1 950
660690 V
Buflex
3x35+3G6+2x1.5
28 mm
185 m
Height tramming
3 180
1 000 V
Buflex
3x35+3G6+2x1.5
28 mm
185 m
Height roof up
2 960
8 362
Ground clearance
280
Recommendations are given for surrounding temperature of 40C and up to a height of 2 000 m.
Copyright 2012, Atlas Copco Rock Drills AB, rebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos
may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information.
20
65
gross weight
kg
15 500
Boom side
11 000
Engine side
4 500
WEIGHT