Final Exam
Instruction: Read the questions carefully. Choose the appropriate answer from the given
four choices. Write the letter that corresponds to your answer on the answer sheet
provided.
1. GSM allows a reuse factor of _______.
a. 1
c. 5
b. 3
d. 7
2. The channels used for transmission from the base station to the mobiles are called ___.
a. Forward channel
c. Reverse channel
b. Control channel
d. Signaling channel
3. The uplink frequency of P-GSM system is
a. 1850 1910 MHz
c. 1710 1785 MHz
b. 890 915 MHz
d. none of the choices
4. Small cells inside a building that support indoor network such as wireless LANS.
a. Microcell
c. nanocell
b. Picocell
d. cluster cell
5. It refers to the infrastructure topology employing frequency reuse concept..
a. Cellular topology
c. Physical topology
b. Logical topology
d. Mobile topology
6. Bandwidth requirement for 3G is ___.
a. 5 20 MHz
c. 100 MHz
b. 200 KHz
d. 10 KHz
7. It refers to the activities a wireless network should perform in order to keep track of
where the mobile is.
a. Location management
c. Handoff management
b. Subscribers locator
d. none of the choices
8. It handles the messages required to make the changes in the fixed network to handle
the change in location during a ongoing communication
a. Location management
c. Handoff management
b. Subscribers locator
d. none of the choices
9. Right now, GSM is the accepted cellular standard in ___
a. Europe
c. Southeast Asia
b. South America
d. All of the choices
10. The location area is the area in which a ___ can be paged.
a. Subscriber
c. Tower
b. BTS
d. none of the choices
11. Bluetooth is the wireless technology for
a. Local area network
c. both a & b
b. personal area network
d. none of the choices
12. Unauthorized access of information from a wireless device through a bluetooth
connection is called
a. Bluemaking
c. bluestring
b. b. bluesnarfing
d. none of the choices
13. The combination of the mobile cell phone and the cell site radio equipment is called
the
a. BSC
c. RF interface
b. MTSO
d. air interface
14. Bluetooth transceiver devices operate in ______ band.
a. 2.4 GHz ISM
c. 2.6 GHz ISM
b. 2.5 GHz ISM
d. 2.7 GHz ISM
15. The blue tooth supports
a. Point-to-point connections
c. both a & b
b. Point-to-multipoint
d. none of the choices
16. The remote and sparsely populated areas will be covered by
a. Microcell
c. picocell
b. Macrocell
d. none of the choices
17. The cell having the same number in the adjacent cluster the same set of RF
a. Adjacent channel
c. macro cell
b. Co-channel
d. selective cell
18. Bluetooth is named after a (n) ___ king.
a. Danish
c. English
b. German
d. Swiss