www.duracable.com
v.15
Table of Contents
3-7
8-18
19-24
25-28
Additional Equipment
29-36
37
Cable Accessories
38
39
40-42
Blades
43-50
51-52
53-54
Jetters
55-59
Camera Systems
61-62
Ordering Information
63
Credit Application
64
Order Form
2 |
Location Systems
Duracable Catalog
DRAIN CARE
ProClean Concentrated Drain Cleaner
ProClean Concentrated Drain Cleaner is a safe, economical and environmentally friendly
solution specifically designed to help keep drains free-flowing and prevent buildups from
grease, fats and soaps. Through natural biological activity, nontoxic, beneficial bacteria absorb
the grease and organic buildup in your pipes and convert them into harmless carbon dioxide
and water. In addition, a biofilm coats the inside of your drain pipes and continues to consume
the organic wastes until the waste is gone. Our formula also has a pleasant herbal fragrance to
deodorize drains.
ProClean Concentrated Drain Cleaner contains no solvents, acids or caustic ingredients and is
approved for use by municipalities and water treatment facilities across the country. ProClean
Concentrated Drain Cleaner will not harm drains - copper, PVC or iron regardless of how
often it is used. Consumers are becoming more and more concerned with the environment
and are willing to spend more money on green products. ProClean Drain Cleaner is NSF
approved which means the product is safe to use around food processing areas.
PART#
DESCRIPTION
QUANTITIES
PC2
ProClean gallons
4 per case
PC1
ProClean quarts
12 per case
PC2C
4 per case
DESCRIPTION
QUANTITIES
PC5
2 per case
Dosage
Amount
2" or less
4 oz.
50
3" to 4"
10 oz.
00
5" to 6"
14 oz.
50
7" to 11"
20 oz.
00
12" to 15"
26 oz.
50
Duracable Catalog
| 3
DESCRIPTION
QUANTITIES
PC3
Inspect grease traps and drain lines prior to treatment. If buildup is severe, the grease
trap should be pumped and drain lines cleaned. If the grease trap is not pumped or
the lines are not cleaned, it will be necessary to apply an initial treatment to overcome
the grease and organic buildup in the system and begin the biological process.
Dosage Amount
50 & below
5 oz.
00
100 to 500
10 oz.
00
600 to 1000
14 oz.
50
1100 to 1500
20 oz.
00
1600 to 2500+
26 oz.
15
Daily Dosage Rate for Drain Lines (up to 1,000-feet) with Average
Organic Loads
Drain Line Diameter
Dosage Amount
2" or less
5 oz.
00
3" to 4"
8 oz.
40
5" to 6"
12 oz.
25
7" to 11"
18 oz.
40
12" to 15"
24 oz.
50
4 |
Duracable Catalog
DRAIN CARE
Hercules Root Destroyer
Root Destroyer is a concentrated chemical product specifically formulated to clear and
prevent root-blocked sewer lines. It is safe to use in lines leading to septic tanks, cesspools
and dry wells when used as instructed and will not harm trees, shrubs, or other vegetation.
This product dissolves slowly, increasing contact time with roots to ensure more complete
removal.
PART#
DESCRIPTION
QUANTITIES
PC4
6 per case
DESCRIPTION
QUANTITIES
PCGTB5
4 per case
PCGTB10
4 per case
Dosage Amount
75KGDs-150KGD
5 lbs. block
250KGD-1MGD
10 lbs. block
DESCRIPTION
QUANTITIES
DC107
Urinal Block
12 per case
PART#
DESCRIPTION
QUANTITIES
DC109
Fragrance Block
12 per case
Duracable Catalog
| 5
RootX
RootX is a foaming root control product which kill roots that are invading drain lines. RootX makes it easy to residential sewer
lines, storm pipes, and septic systems. The product is guaranteed to keep lines free of roots for 12 months. RootX is non-systemic
so will not harm plants or trees and will not damage pipes or septic systems.
PART#
DESCRIPTION
QUANTITIES
ROOTX
12 per case
ROOTX4
12 per case
ROOTXC
ROOTX4C
FA101
Application Funnel
Each
DESCRIPTION
6 |
Duracable Catalog
QUANTITIES
Individually
DRAIN CARE
ProClean Drain Care Supporting Materials
Urinal Blocks
PART#
DESCRIPTION
What do you do
Kit
after(DVD)
a drain has
been cleaned?
PCSKD
PCDCBR
PCDCC
PC5 BROCHURE
PC3 BROCHURE
DC107PKTBRO
The ProClean
Family of Drain
Care Products
Sugar Residue
Digestant
Urinal &
Fragrance
Blocks
Commercial
Drain Care
2
Duracable Manufacturing Company
West Des Moines, IA 50265
sales@duracable.com
Nonfood Compounds
Program Listed L2
Registration # 139472
w w w. d u r a c a b l e . c o m
Duracable Manufacturing Company
West Des Moines, IA 50265
sales@duracable.com
Dura_SRD_Brochure.indd
DC107PktBro 1
w w w. d u r a c a b l e . c o m
6/6/12 3:48 PM
DC106PktBro
Dura_UrinalBlock-Bifold.indd 1
10/31/12 9:50 AM
#PCDCC
www.duracable.com
ProCleanCommercialBroch.indd 1
www.duracable.com
4/30/10 12:20 PM
Misting Unit
The Misting Unit attaches to the Time Flow Meter and sprays the drain care
product, coating the entire inside of the line. When using Sugar Residue
Digestant and the Time Flow Meter with beverage towers, the Misting Unit is
helpful in that the Sugar Residue Digestant is now a fine mist and goes into the
small drain line of the beverage tower much easier.
PART#
DESCRIPTION
QUANTITIES
MIST1
Individually
Drum Pump
The Drum Pump allows for the manual application of product into drain lines
from five-gallon, 15-gallon and 30-gallon drums.
PART#
DESCRIPTION
QUANTITIES
DRUM PUMP
Drum Pump
Individually
Duracable Catalog
| 7
DM175
DM162
DM10
DM55
J-Maxx
DM30
DM138
DM150
DM125
8 |
Duracable Catalog
with 18"
enclosed
polyethylene
reel
MACHINES
MACHINE COMPARISON SIDE-BY-SIDE
DM175
DM162
DM55
DM30
DM10
J-MAXX
DM150
DM138
DM125
1/2 HP motor
1/3 HP motor
3/4 HP motor
1/2 HP motor
1/3 HP motor
1/3 HP motor
1/4 HP, DC
motor
1/4 HP motor
1/6 HP motor
175 RPM
265 RPM
175 RPM
200 RPM
195 RPM
200 RPM
230 RPM
230 RPM
230 RPM
Belt Drive
Belt Drive
Belt Drive
Direct Drive
Pulley Drive
Pulley Drive
23" Reel
18" Reel
26" Reel
21" Reel
16" Reel
19" Reel
14" Reel
14"Reel
8" Reel
11/16" x 90'
5/8" x 80'
11/16" x 150'
5/8" x 100'
3/8" x 75'
1/2" x 75'
1/2" x 90'
3/8" x 90'
1/4" x 37'
PCFR
PCFR
PCFR
PCFR
PCFR
(optional)
Mini PCFR
(optional)
Mini PCFR
(optional)
N/A
N/A
3-year warranty
3-year warranty
3-year warranty
2-year warranty
2-year warranty
2-year warranty
2-year warranty
2-year warranty
2-year warranty
Telescoping
Handle
Telescoping
Handle
Telescoping
Handle
Telescoping
Handle
Telescoping
Handle
Detachable
T handle
Optional
Handle
N/A
Optional
Handle
USES:
3" to 10" lines,
Main Lines,
Commercial,
Residential,
Industrial,
Grease, Roots
USES:
2" to 6" lines,
Residential,
Floor Drains,
Roof Vents,
Light Commercial
USES:
2" to 10" lines,
Main Lines,
Commercial,
Residential,
Industrial,
Grease, Roots
USES:
2" to 6" lines,
Residential,
Floor Drains,
Roof Vents,
Light Commercial
USES:
1" to 4" lines,
Residential,
Roof Vents,
Sinks, Bathtubs,
Shower Drains,
Floor Drains,
Laundry Drains
USES:
1" to 4" lines,
Residential,
Roof Vents,
Sinks,
Floor Drains
USES:
1-1/4" to 4"
lines,
Residential,
Sinks, Bathtubs,
Shower Drains,
Roof Vents,
Floor Drains
USES:
1-1/4" to 3"
lines,
Residential,
Sinks, Bathtubs,
Shower Drains
USES:
1-1/4" to 2"
lines,
Residential,
Sinks, Bathtubs,
Shower Drains
MACHINE WARRANTY
REPAIRS
Duracable Catalog
| 9
The DM175 has big power and several extra features that work to help make your job easier!
Use this big machine for main lines, industrial, commercial, residential, overhead and wall
cleanouts, floor drains, heavy grease or tree roots.
DM175
Specifications:
Features:
26"
33"
Width
With wheels (narrow)
22-1/2"
Height
With handle in low position
With handle in mid position
With handle in high position
45"
47"
49"
Weight
Machine
91.5 lbs.
23PR reel w/ 10' tail piece 33.5 lbs.
PCFR
12 lbs.
Wheels, 10"
12.5 lbs.
Arms
92RA-L
This is the
standard
arm that
comes with
this machine
package.
Opposite
arms are
available.
10 |
Duracable Catalog
Item
Item Description
DM175SP1
1/2 HP motor at 175 RPM, 23" enclosed polyethylene reel, 11/16" x 100' cable
Item Description
D92005K
PCFR
25220
10" wheels
MM1
Stair Climbers
92072K
92070
25074
25061
27PR
23PR
18PR
92026K
PCFR35K
92RA-R
MACHINES
The DM162 is recommended for residential lines, floor drains, roof
vents, and light commercial drain lines.
DM162
Features:
Item Description
DM162SP1
1/3HP Motor at 265 RPM with 18" polyethylene reel and 5/8" x 80' cable
Item
Item Description
71005K
1/3 HP Motor
92PCFR
25220K
NWKU
WWKU71
71052K
25074
25061
EB1K
71080K
71070K
71RA-L
71RA-R
23.25"
30.25"
Width
With wheels (standard)
19"
Height
Handle in low position
Handle in high position
38"
43.25"
Weight
Machine
PCFR
Wheels (10")
18PR reel
72 lbs.
12 lbs.
2 lbs.
19 lbs.
Arms
71RA-L or 71RA-R
18" reel
This is the
standard
arm that
comes with
this machine
package.
Duracable Catalog
| 11
The DM55 is the original sled-style machine that delivers plenty of power.
This machine is used for main lines, industrial, commercial, residential, floor
drains, grease and roots.
DM55
Specifications:
3/4 HP motor
(2-year warranty)
175 RPM
Features:
DM55
Item
24.5"
26.5"
Height
With PCFR
23.25"
Weight
Machine
26PR reel w/ 10' tail piece
PCFR
Wheels (standard)
Wheels (wide)
Arms
82RAS
45"
104 lbs.
24.7 lbs.
12 lbs.
12.5 lbs.
11.5 lbs.
12 |
Duracable Catalog
Item Description
3/4 HP motor at 175 rpm with PCFR, 26" open spoke metal reel, 11/16" x 110' cable
DM55 SPJ
3/4 HP motor at 175 rpm with PCFR, 26" jumbo open spoke metal reel, 11/16" x 150' cable
3/4 HP motor at 175 rpm with PCFR, 26" oversized enclosed polyethylene reel, 11/16" x 150'
cable
DM55 SPP
3/4 HP motor at 175 rpm with PCFR, 26" enclosed polyethylene reel, 11/16" x 110' cable
CABLE SUBSTITUTIONS
Item
Item Description
CH69-150
CH75-110
CH75-150
LC
Item Description
DRC26
DRCJ
Jumbo Reel Cover for 26" Open Spoke Metal Reel (D1KJ)
PCFR
PCFR80K
WWK10
Wide wheels
NWK10
Narrow wheels
81005K
81052K
MACHINES
The DM30 is a great mid-range machine that gets through the big lines just as easy as it
gets through the small jobs. Use this machine for residential, floor drains, roof vents or
light commercial jobs.
Specifications:
1/2 HP motor
200 RPM
Features:
DM30
DM30
Item
Item Description
1/2 HP motor at 200 RPM with PCFR, 21" open spoke metal reel, 5/8" x 100' cable
1/2 HP motor, 200 RPM with PCFR, 21" polyethylene reel, 5/8" x 100' cable
CABLE SUBSTITUTIONS
Item
Item Description
CH50-100
LC
Item
Item Description
DRC19
DRC21
Reel Cover for 21" Open Spoke Metal Reel Cover (D1J1)
DKIT2
Blade Kit
PCFR
PCFR80K
WWK10
Wide Wheels
NWK10
Narrow Wheels
61005K
1/2 HP Motor
61052K
PCFR35K
40-1/2"
Width
With wheels (standard)
24-3/4"
Height
With wheels (standard)
20"
Weight
Machine
Reel (D1J1-standard)
PCFR
Wheels (wide), 10"
Arms
D8K6S
61RAS
100 lbs.
21 lbs.
12 lbs.
12 lbs.
21" Metal,
21" Polyethylene
This is the
standard
arm that
comes with
this machine
package.
Duracable Catalog
| 13
DM10
The DM10 is an ideal machine for smaller residential jobs. It is light and maneuverable and can
handle various reel and cable options. The DM10 is designed for residential jobs, roof vents,
sinks, bathtubs, shower drains, floor drains, and laundry drains.
Specifications:
1/3 HP motor
195 RPM
Features:
Telescoping Handle
Ground Fault Circuit
Interruptor
6" wheels
Standard Safety
Air Foot Pedal
Available with
16" or 19" reels
DM10
Item
20"
Height
Standard machine
18"
Weight
Machine
D1S Reel
Wheels (standard)
71 lbs.
9.5 lbs.
5.5 lbs.
Arms
D8SL2
D8Sl9
16" reel
19" reel
This is the
standard
arm that
comes with
this machine
package.
14 |
Duracable Catalog
Item Description
1/3 HP motor at 195 RPM, 16" open spoke metal reel, 3/8" x 75' cable
DM10 SPA
1/3 HP motor at 195 RPM, 19" open spoke metal reel, 1/2" x 75' cable
1/3 HP motor at 195 RPM, 16" enclosed polyethylene reel, 3/8" x 75' cable
DM10 SPC
1/3 HP motor at 195 RPM, 19" enclosed polyethylene reel, 1/2" x 75' cable
CABLE SUBSTITUTIONS
Item
Item Description
CH50-075
LC
Item Description
PCFR
PCFR80K
DKIT1
Blade Kit
DRC16
DRC19
41060
41025K
41005
1/3 HP Motor
MACHINES
The J-Maxx packs a lot of power for a smaller machine. It is designed to clean residential
jobs, roof vents, or floor drains.
J-Maxx
Features:
MODEL J-MAXX
Item
Item Description
Metal Reel Packages
J-MAXX SP
1/3 HP motor at 200 RPM without PCFR, 16" open spoke metal reel, 3/8" x 75' cable
J-MAXX SPA
1/3 HP motor at 200 RPM without PCFR, 19" open spoke metal reel, 1/2" x 75' cable
1/3 HP motor at 200 RPM without PCFR, 16" polyethylene reel, 3/8" x 75' cable
1/3 HP motor at 200 RPM without PCFR, 19" polyethylene reel, 1/2" x 75' cable
CABLE SUBSTITUTIONS
Item
Item Description
CH50-090
CH38-075
CH38-090
LC
27"
17-1/2"
Height
Machine 17"
Weight
Machine
Reel (D1S1)
Wheels (narrow)
56.5 lbs.
10.5 lbs.
13 lbs.
Arms
D8SL9A w/31020
D8SL2A w/31021
19" reel
16" reel
Item
Item Description
DRC16
DRC19
31005
780000
This is the
standard
arm that
comes with
this machine
package.
Duracable Catalog
| 15
DM150
The DM150 is a compact pivot machine that has 5 locked positions that it can operate
in which makes this perfect for a variety of jobs. The Pivot machine was designed for
residential, sinks, bathtubs, shower drains, roof vents, and floor drains.
Specifications:
1/4 HP gear-driven motor
230 RPM
Features:
Ground Fault Circuit Interruptor
Machine Cart
Standard Safety Air Foot Pedal
Available with 8" or 14" reels
52025K
52040
DM150
Item
Item Description
DM150A2
DM150A1
1/4 HP motor at 230 RPM, two 14" oversized enclosed polyethylene reels, one 14" enclosed
polyethylene reel, machine cart, 1/2" x 75' cable, 3/8" x 75' cable
1/4 HP motor at 230 RPM, one 14" enclosed polyethylene reel, 3/8" x 75' cable
DM150A
1/4 HP motor at 230 RPM, one 14" oversized enclosed polyethylene reel, 1/2" x 75' cable
Length
Standard 17"
Item
Item Description
Width
Standard 20"
52005
25074
Height
with reel
16"
25061
Weight
Machine
14PROK
52025K
34 lbs.
8.25 lbs.
25216
Guide Tube
11036
3/8" cable
1/2" cable
52040
14PRWLK
14PRWRK
14PROWLK
14PROWRK
780000
38RAW-L
50RAW-L
Arms
38RAW-L
50RAW-L
This is the
standard
arm that
comes with
this machine
package.
Opposite
arms are
available.
16 |
Duracable Catalog
MACHINES
The DM138 is a small machine but can get the job done. It handles lines from 1-1/4" to
3". Use this big machine for residential, sinks, shower and bath tub drains.
DM138
Features:
Vertical or Horizontal
Operation
Ground Fault Circuit
Interruptor
Standard Safety Air
Foot Pedal
Available with 8"
or 14" reels
DM138
Item
Item Description
DM138A
1/4 HP motor at 230 RPM, air foot pedal, 14" enclosed polyethylene reel, 3/8" x 90' cable
DM138A2
1/4 HP motor at 230 RPM, air foot pedal, one 8" enclosed polyethylene reel,
one 14" enclosed polyethylene reel, 3/8" x 90' and 1/4" x 37' cable
Item
Item Description
25061
25074
25003
Forward/Reverse Switch
11040
25216
Guide Tube
11036
8PRK
8" Enclosed Polyethylene Reel with Inner Reel and Head Bearing
14PRK
14" Enclosed Polyethylene Reel with Inner Reel and Head Bearing
14PRWLK
14" Enclosed Polyethylene Reel with Inner Reel and Head Bearing (left arm)
14PRWRK
14" Enclosed Polyethylene Reel with Inner Reel and Head Bearing (right arm)
780000
20"
Width
With 14" reel (standard)
14"
Height
With 14" reel (standard)
15-1/4"
Weight
Machine
14PRK reel
Arms
38RAW-L
25RA
22.5 lbs.
7.75 lbs.
14" reel
8" reel
This is the
standard arm
that comes
with this
machine package. Opposite
arms are available for the
14" wheel.
Duracable Catalog
| 17
DM125
The DM125 is small but powerful and can tackle most small residential jobs. This
machine is designed for use with residential lines, sinks, bathtubs, and shower
drains.
Specifications:
1/6 HP motor
230 RPM
Features:
DM125
Item
Item Description
DM125A
1/6 HP motor at 230 RPM, air foot pedal, 8" enclosed polyethylene reel, 1/4" x 37' cable
Item
Item Description
11006
1/6 HP motor
Length
Standard Machine
20"
25001
Width
With 14" reel (standard)
25074
10"
25061
25003
Forward/Reverse Switch
25216
Guide Tube
11036
8PRK
8" Enclosed Polyethylene Reel with Inner Reel and Head Bearing
Height
With 14" reel (standard)
Weight
Machine
14PRK reel
15-1/4"
22.5 lbs.
6.25 lbs.
Arms
25RA
8" reel
This is the
standard
arm that
comes with
this machine
package.
18 |
Duracable Catalog
Standard Package
The PCFR is standard on Model DM175, DM162, DM55, DM30, and is an option on Model DM10.
PCFR
Mini PCFR
Part#
Description
PCFR
PCFR23SER
PCFR22SER
PCFR80K
MINI PCFR
Air Foot
Pedal
Part#
Description
780000
780005K
SB23K
25074
GFCI
Part#
Description
25073K
25074
GFCI
Wheels
Part#
Description
GFC123
GFI Cord
25160
25165
25166
25172
R96265
R27187
R72002
WHEELS
25220
Part#
Description
NWK10
WWK10
25220
WWKU
Duracable Catalog
| 19
REEL CONFIGURATIONS
Part#
Description
Recommended Cable
N/A
8PR
CH25-037, CI25-037
N/A
8PR
CH25-037, CI25-037
14PRWRK
N/A
38RAW-R
14PRWLK
N/A
38RAW-L
CH38-090,
CH38-075
CH38-090,
CH38-075
N/A
38RAW-R
14PRWLK
N/A
38RAW-L
14PROWRK
TS50-004
50RAW-R
CH38-090,
CH38-075
CH38-090,
CH38-075
CH50-075, CH50-090
14PROWLK
TS50-004
50RAW-L
CH50-075, CH50-090
N/A
14PRS
14" Polyethylene Reel for 1/4", 5/16, 3/8" Cable (J-Maxx Machine)
N/A
D1LE
N/A
16PRS
16" Polyethylene Reel for 1/4", 5/16, 3/8" Cable (J-Maxx Machine)
TS38-004
CH38-090, CH38-075
D1S
TS38-004SO
CH38-090, CH38-075
D1SE
TS38-004PI
CH38-090, CH38-075
19PRS
TS50-004
CH50-075, CH50-090
D1S1
TS50-004SO
CH50-075, CH50-090
D1S1E
TS50-004PI
CH50-075, CH50-090
14" Polyethylene Reel for 1/4", 5/16, 3/8" Cable (DM10 Machine)
N/A
D8SL2
D1L
N/A
D8SL2
CH25-037,
CH25-050,
CI25-037
CH25-037, CH25-050, CI25-037
D1LE
N/A
D8SL2
16PRS
16" Polyethylene Reel for 1/4", 5/16, 3/8" Cable (DM10 Machine)
TS38-004
D8SL2
CH38-090, CH38-075
D1S
TS38-004SO
D8SL2
CH38-090, CH38-075
D1SE
TS38-004PI
D8SL2
CH38-090, CH38-075
19PRS
TS50-004
D8SL9
CH50-075, CH50-090
D1S1
TS50-004SO
D8SL9
CH50-075, CH50-090
D1S1E
TS50-004PI
D8SL9
CH50-075, CH50-090
20 |
Duracable Catalog
MACHINE ACCESSORIES
REEL CONFIGURATIONS
Part#
Description
Tail Section
Revolving Arm
Recommended Cable
TS38-004PI
D8SL6
CH38-090, CH38-075
16PRS
16" Polyethylene Reel for 1/4", 5/16, 3/8" Cable (DM30 Machine)
TS38-004
D8SL6
CH38-090, CH38-075
D1S
TS38-004SO
D8SL6
CH38-090, CH38-075
19PRS
TS50-004
D8SL6
CH50-075, CH50-090
D1S1
TS50-004SO
D8SL6
CH50-075, CH50-090
D1S1E
TS50-004PI
D8SL6
CH50-075, CH50-090
D1J1
TS50-004FR
D8K6S
CH50-075, CH50-090
D1J1
TS50-004FRSJ
D8K6S
CH50-075, CH50-090
D1J1
TS62-004FRSP
D8K6S
CH62-100, CH62-075
D1J1
TS62-004FR
D8K6S
CH62-100, CH62-075
D1J1
TS62-004FRSJ
D8K6S
CH62-100, CH62-075
D1J1E
TS50-004FRSJ
D8K6S
CH50-075, CH50-090
D1J1E
TS62-004FRSP
D8K6S
CH62-100, CH62-075
D1J1E
TS62-004FR
D8K6S
CH62-100, CH62-075
D1J1E
TS62-004FRSJ
D8K6S
CH62-100, CH62-075
21PRS
TS62-004
61RAS
CH62-100, CH62-075
D1J1
TS50-004FR
D8K6S
CH50-075, CH50-090
D1J1
TS50-004FRSJ
D8K6S
CH50-075, CH50-090
D1J1
TS62-004FRSP
D8K6S
CH62-100, CH62-075
D1J1
TS62-004FR
D8K6S
CH62-100, CH62-075
D1J1
TS62-004FRSJ
D8K6S
CH62-100, CH62-075
D1J1E
TS50-004FRSJ
D8K6S
CH50-075, CH50-090
D1J1E
TS62-004FRSP
D8K6S
CH62-100, CH62-075
D1J1E
TS62-004FR
D8K6S
CH62-100, CH62-075
D1J1E
TS62-004FRSJ
D8K6S
CH62-100, CH62-075
26PR
26PR
26PR
26PR
26PR
26PRO
26PRO
26PRO
26PRO
26PRO
D1K
D1K
D1K
D1K
D1KE
D1KE
D1KE
D1KE
D1KJ
D1KJ
D1KJ
D1KJ
TS62-010P
TS69-010P
TS69-010SJP
TS75-010P
TS75-010SJP
TS62-010P
TS69-010P
TS69-010SJP
TS75-010P
TS75-010SJP
TS69-010FR
TS69-010FRSJ
TS75-010FR
TS75-010FRSJ
TS69-010FR
TS69-010FRSJ
TS75-010FR
TS75-010FRSJ
TS69-010FR
TS69-010FRSJ
TS75-010FR
TS75-010FRSJ
82RAS
82RAS
82RAS
82RAS
82RAS
82RAS
82RAS
82RAS
82RAS
82RAS
82RAS
82RAS
82RAS
82RAS
82RAS
82RAS
82RAS
82RAS
82RAS
82RAS
82RAS
82RAS
CH69-100, CH69-100
CH69-150, CH69-120
CH75-100, CH75-050
CH75-100A, CH75-050
CH75-100, CH75-050
CH62-100, CH62-075
CH69-100, CH69-100
CH69-100, CH69-100
CH75-100, CH75-050
CH75-100, CH75-050
CH69-100, CH69-100
CH69-100, CH69-100
CH75-100, CH75-050
CH75-100, CH75-050
CH69-100, CH69-100
CH69-100, CH69-100
CH75-100, CH75-050
CH75-100, CH75-050
CH69-150, CH69-120
CH69-150, CH69-120
CH75-100, CH75-050
CH75-100, CH75-050
Duracable Catalog
| 21
Description
18" Polyethylene Reel (DM175 Machine)
23" Polyethylene Reel (DM175 Machine)
23" Polyethylene Reel (DM175 Machine)
27" Polyethylene Reel (DM175 Machine)
27" Polyethylene Reel (DM175 Machine)
27" polyethylene reel (DM175 Machine)
27" polyethylene reel (DM175 Machine)
Tail Section
TS62-004
TS69-010
TS75-010
TS69-010
TS75-010
TS69-010
TS75-010
Revolving Arm
92RA-R or 92RA-L
92RA-R or 92RA-L
92RA-R or 92RA-L
92RA-R or 92RA-L
92RA-R or 92RA-L
92RA-R or 92RA-L
92RA-R or 92RA-L
Recommended Cable
CH62-100, CH62-075
CH69-100, CH69-100
CH75-100, CH75-075
CH69-150, CH69-120
CH75-100, CH75-050
CH69-150, CH69-120
CH75-100, CH75-050
CABLE ACCESSORIES
Part#
Description
LEADERS
FL62-002SO
FL62-005-S62F
5' Flexible Leader, 5/8" with steel inner core, Spartan style female end
FL69-002
FL69-002SP
FL75-002
FL75-002SP
3/8" x 4' tail section with ends, floating ring with reel attachment (D3E)
TS38-004PI
TS38-004SO
TS50-004FR
1/2" x 4' tail section with ends, floating ring with reel attachment (D3E)
TS50-004FRSJ
1/2" x 4' tail section with ends slip joint, floating ring with reel attachment (D3RJ)
TS50-004PI
TS50-004SO
TS62-004FR
5/8" x 4' tail section with ends, floating ring with reel attachment (D3R)
TS62-004FRSJ
5/8" x 4' tail section with ends slip joint, floating ring with reel attachment (D3RJ)
TS62-004PI
TS62-004SO
TS62-004SP
5/8" x 4' tail section with male end, Spartan style female ends, reel attachment (D3R)
5/8" x 10' tail section with male and female ends, floating ring for polyethylene reel, reel attachment (D3R)
DCH62-010LW
TS69-010FR
11/16" x 10' tail section with ends, floating ring, reel attachment (D3R)
TS69-010FRSJ
11/16" x 10' tail section with slip joint ends, floating ring, reel attachment (D3RJ)
TS69-010P
11/16" x 10' tail section with ends, floating ring for polyethylene reel, reel attachment (D3R)
TS69-010SJP
11/16" x 10' tail section with slip joint ends, floating ring for polyethylene reel, reel attachment (D3RJ)
DCH69-010LW
TS75-010FR
3/4" x 10' tail section with ends, floating ring, reel attachment (D3R)
TS75-010FRSJ
3/4" x 10' tail section with slip joint ends, floating ring, reel attachment (D3RJ)
TS75-010P
3/4" x 10' tail section with ends, floating ring for polyethylene reel, reel attachment (D3R)
TS75-010SJP
3/4" x 10' tail section with slip joint ends, floating ring for polyethylene reel, reel attachment (D3RJ)
DCH75-010LW
22 |
Duracable Catalog
MACHINE ACCESSORIES
Loading Ramp
Tired of straining your back, lifting and lugging your drain cleaning machine on and off your van on every job? Invest in the
loading ramp and winch system and see how easy it is to eliminate dangerous stress on your back, cut down on costly workers
compensation claims, and add years of life to your equipment. Our remote switch makes loading and unloading much safer and
makes the ramp and winch system OSHA compliant for accessibility. All winches will now have a hand-held remote with a 12-foot
cord instead of the switch on the frame.
Ramp and extension rollers provide support to the machine during loading and unloading, for less strain on the machine frame.
Both the ramp and extension have crossbars added in the frame to create a more stable unit. A pin with lanyard is included to
keep the ramp extension in the retracted position when not in use. The mount plate for the winch is now pitched at the same
angle as the ramp, leading to better cable clearance as the cable unwinds and rewinds. The optional EZ-Store Shelf bolts directly
onto the loading ramp frame with just four bolts and provides storage for all the extra equipment you need for a job.
LOADING RAMP UNITS
Part#
Description
Tail
Wheel Stops
Skid
Shelf
Short
Wheel Stops
ULR001AA
Long
Wheel Stops
ULR001AS
Short
Wheel Stops
Shelf
ULR001ASL
Long
Wheel Stops
Shelf
Short
Wheel Stops
ULR001BB
Long
Wheel Stops
ULR001C
Short
Wheel Stops
Skid
ULR001CC
Long
Wheel Stops
Skid
ULR001BS
Short
Wheel Stops
Shelf
ULR001BSL
Long
Wheel Stops
Shelf
ULR001CS
Short
Wheel Stops
Skid
Shelf
ULR001CSL
Long
Wheel Stops
Skid
Shelf
Wheel Stops
Skid
Shelf
ULR001DD
Long
Wheel Stops
Skid
Shelf
ULR001DS
Short
Wheel Stops
Skid
Shelf
ULR001DSL
Long
Wheel Stops
Skid
Shelf
DM55
ULR001A
DM175
ULR001B
K7500
ULR001D
Part#
Description
ULR002
LR074
LR077
LR078
LR007
UEZ01
Ramp Shelf
82090
92090
90080
92080
LR075
Duracable Catalog
| 23
Reel Shield
The Reel Shield helps keep the mess to a minimum when you are operating a
machine with an open reel. By placing the Reel Shield over the reel, you can
control any splatter which helps make cleanup easier after the job is complete.
REEL SHIELD
Part#
Description
RS2
Reel Shield
Reel Cart
The Reel Cart (Part# 25200) is a hand dolly with stair
climbers to help you transport your reels. The reel cart
is a safety measure to transport the reel with cable
separately from the drain machine.
REEL CART
Part#
Description
25200
Reel Covers
Reel covers are designed for use
with our open spoke reels to
decrease the amount of splatter
while operating your drain
machines. These covers help
keep the work area cleaner.
24 |
Duracable Catalog
REEL COVERS
Part#
Description
DRC14
DRC16
DRC19
DRC21
DRC26
DRCJ
ADDITIONAL EQUIPMENT
Toilet Augers
The toilet auger is a flexible, heavy-duty tool with a wire rope center. The
flexible drop head works like a cushioned universal joint, following bowl
contours and sharply angled passages while protecting inner walls from
chipping and breaking. Replacement cables are available in 3- or 6-feet.
Toilet Auger
(Part# 3FL)
Telescoping Handle
(Part# R59787)
Combination Auger
Ridgid features a combination auger that can be used both manually and with
a drill to clear urinal or shower drains. The handle removes so that a drill can
be attached. The telescoping design allows the cable to reach further down the
line, and the 'c' cutter on the end of the cable is ideal for breaking up blockages.
Combination
Auger - Drill not
included (Part#
R46683)
Urinal Augers
Duracable's urinal augers are specially designed and coiled for clearing urinals.
Urinal Auger
(Part# TU4)
Auger Mat
The Auger Mat is developed specifically for plumbing and drain cleaning
professionals. The mat is an ideal way to protect your customers toilet bowl
from scratching and marring.
TOOLS
Part#
Description
TOILET AUGERS
3FL
3FL-DH
T6FL
T6FL-DH
R59787
R59802
Auger Mat
(Part# AM001)
COMBINATION AUGER
R46683
URINAL AUGERS
TU4
AUGER MAT
AM001
Auger Mat
Duracable Catalog
| 25
Super-Vee
The Super-Vee offers you a complete system for cleaning drain lines through 3" in
diameter. The Super-Vee features a Dyna-Thrust bearing system which helps carry
the weight of the reel, significantly reducing wear on the motor shaft bearing and
extending the life of the tool. The Super-Vee is UL-listed and CSA-approved. The
ball-bearing motor is double-insulated and is reversible with variable speed control
from 0 500 rpm. The slide-action chuck has a grip shield that moves back to engage
the cable, and moves forward to release the cable. With a quick movement of the
grip shield, you release or engage the cable without the need for a chuck, and with
automatic adjustment for different diameter cables. The reel capacity is 50-feet of 1/4"
or 5/16" cable, or 35-feet of 3/8" cable. Comes with carrying case (SVH).
SVH
SUPER-VEE - GENERAL
Part#
Description
SVH
Super-Vee machine including slide-action chuck, vari-speed motor with reversing switch, inner plastic
reel
K-45 Machine
The K-45 sink machine is excellent for small line cleaning. It opens clogged lavatory,
sink lines, urinals, bathtubs and shower drains. It is available in two styles manual
and auto-feed. Both have the slide-action chuck for quick locking and releasing
of the cable. The advanced two-way autofeed style keeps hands and work
area clean by advancing and retrieving cable with the push of a lever. It is
lightweight, easy-to-use and no setup is required.
The variable-speed power unit rotates the cable from zero to 600 RPM.
The reel capacity is 50-feet of 5/16" cable or 35-feet of 3/8" cable.
Approved by CSA to CSA and UL Standards (115V only).
Two-piece twist lock canister with an interchangeable inner reel.
R36013
Description
R36018
K-45 machine package with slide action chuck, auto-feed, and 5/16" x 25' cable
R36013
K-45 machine package with slide action chuck, auto-feed, and 5/16" x 25' cable with carrying case
26 |
Duracable Catalog
ADDITIONAL EQUIPMENT
Kinetic Water Ram Machine
Here is a compact, lightweight tool for quickly opening clogged sinks, toilets
and bathtubs. It handles rust, grease, sediment and scale in lines up through 4"
in diameter. The Kinetic Water Ram uses a burst of compressed air that drives
a shock wave (kinetic energy) through water to break up stoppages. It
is particularly useful when the stoppage is on the far side of a reel trap
or series of tight bends, since the shock wave can travel around bends
without losing its force.
KWR
Description
KWR
The Kinetic Water Ram features a 16 gauge plated cylinder tested for up to
KR-RK
Repair Kit for Kinetic Water Ram
600 lbs. of pressure. A 160 lb. gearless pressure gauge provides pinpoint
pressure control. A built-in air compressor easily pumps up to desired
pressure. A flexible cone seals drains ranging from 1-1/4" to 4" in diameter.
It is equipped with a Schraeder valve for use with an external air compressor when clearing difficult stoppages. Standard fittings
include a caulking hose, 4" tapered rubber cone, and five tapered rubber plugs for sealing openings from 1-1/4" through 4" lines.
Part#
Description
R58920
R59000
K-50 machine with A-17-A Adapter, A-17-B Adapter, A-30 Cable Kit
R58920
Duracable Catalog
| 27
R66492
Simple adjustment knob allows unit to spin both 7/8" and 5/8" cable
K-60 SECTIONAL MACHINE - RIDGID
Part#
Description
R66492
K-60 machine with Drain Cleaning Mitt, A-12 Pin Key, A-60-12 Rear Guide Hose
R66497
K-60 machine with Drain Cleaning Mitt, A-12 Pin Key, A-60-12 Rear Guide Hose,
A-61 Tool Kit and A-62 Cable Kit
Description
R91032
K1500SP machine (B Frame) with A-1 Drain Cleaning Mitt, A-12 Pin Key, A-34-12 Rear Guide Hose,
3 Carrier Cable Combination Kit
28 |
Duracable Catalog
R91032
CABLE
DuraFlex
Our DuraFlex cable is a favorite among Duracable service technicians. We manufacture it
from a proprietary, hard-drawn, high-tensile, strength wire in a variety of diameters, lengths
and flexible characteristics to fit every application.
DuraFlex Cable comes in a variety of flexible styles, including: Hollow
Core, Loose Wound Hollow Core, Inner Core, Loose Wound Inner
Core, Cable-In-Cable, Oil-Tempered Hollow Core and OilTempered Inner Core.
All cable is packaged and shipped to you in a unique carton that
eliminates problems caused by banding and protects the cable during
the shipping process. The cable loads easily into your machine with fewer
kinks, longer life and better return on your investment.
We thoroughly test our cable before distribution. If the cable does not pass
any of the tests, it is discarded and will not be sold. The entire shipment of wire is returned to
our supplier. If the cable passes all of the tests, it is boxed and tagged for use.
Testing
Our diameter test checks the outside and inside diameter of the
cable. The gauge used in the tests tells us the diameter of the
cable, to make sure it meets our specifications.
Drop Test
The drop test checks to make sure the stiffness of the cable is
adequate. If cable is too limber it will not move through the drain
properly. Duracable also manufactures loose wound cable for
those who prefer that style of cable. Another option is to add a
loose wound leader to your firmer DuraFlex cable. With our stiff
cable you can get more life (and more jobs) per cable.
Twist Test
Stretch Test
For the stretch test, the cable is mounted onto our stretch
indicator and the pressure gauge is set. The distance between the
coils is less than 1/3 the thickness of a human hair. We stretch the
cable until a feeler gauge can be inserted between the links on
the cable. The pounds of pressure and distance are recorded for
cable consistency.
The cable is then stretched and we check to see how many
pounds of pressure it took to make the cable stretch. We then
bring the cable back to the point where there is no pressure on
the coils and we measure how much the cable actually stretched.
Duracable Catalog
| 29
CABLE
Part#
Description
1/4" CABLE
CH25-037
CH25-050
CH25-075
CH25-100
CH25-CUS
CH25-037LW
CH25-050LW
CI25-037
CI25-050
CI25-075
CI25-100
CI25-CUS
5/16" CABLE
Ideal for household clogs, sinks, tubs, and other minor jobs,
this cable is light enough to maneuver smaller household
drains. For use in 1" to 2" lines.
10 Pack
CH31-037
CH31-050
CH31-075
CH31-100
NA3F
NA3FK
CH31-CUS
CI31-037
CI31-CUS
Please specify if
you would like ends
on your cable when
ordering.
Description
NA3F-PK10
n/a
NA2F-PK10
n/a
Hollow-Core
NA3K
Cable-In-Cable
NA2F
5/16" Female
Inner Core
NA3F
1/4" Female
Cable Comparison
Standard multi-purpose cable that is made from hard-drawn,
high-tensile wire in a variety of diameters and lengths.
10 Pack
Description
NA2K-PK10
COUPLINGS
Part#
Description
HXNUT13
Oil-Tempered
Loose-Wound
30 |
Duracable Catalog
CABLE
Cable 3/8"
CABLE
Part#
Description
3/8" CABLE
CH38-050
CH38-060
CH38-075
CH38-090
CH38-100
Part#
10 Pack
Description
CH38-CUS
NA13
NA13-PK10
CH38-075LW
NA13K
NA13K-PK10
CI38-060
GEFC38
n/a
CI38-075
CI38-090
CI38-100
CI38-CUS
CI38-090LW
Please specify if
you would like ends
on your cable when
ordering.
NA13
3/8 Female
Cable Comparison
Hollow-Core
Inner Core
Cable-In-Cable
10 Pack
Description
NA1K
NA1K-PK10
GEMC38
n/a
SPLICE CORES
Part#
10 Pack
Description
NA9
NA9S
NA9-PK10
NA9S-PK10
COUPLINGS
Part#
10 Pack
Description
HXNUT13
n/a
NA9
3/8" Splice
Core End
HXNUT13
Coupling Sleeve
Oil-Tempered
Loose-Wound
Duracable Catalog
| 31
Cable 1/2"
CABLE
Part#
Description
1/2" CABLE
CH50-060
CH50-075
CH50-090
CH50-100
CH50-CUS
CH50-075LW
CI50-060
CI50-075
CI50-090
CI50-100
CI50-CUS
Please specify if
you would like ends
on your cable when
ordering.
Designed for tough jobs in lines less than 4", our 1/2" cable
can get the job done. Using this cable along with regular or
heavy-duty blades can help clean the line.
FEMALE END FITTINGS
Part#
10 Pack
Description
NA14
NA14K
NA14-PK10
NA14K-PK10
GEFC50
S50F
RLPIN10
N/A
N/A
N/A
NA14
1/2" Female
Cable Comparison
Part#
10 Pack
NA12K
NA12K-PK10
Hollow-Core
NA1238K
GEMC50
Inner Core
Cable-In-Cable
Oil-Tempered
A6G
S50M
Description
10 Pack
Description
A2G
A2G-PK10
SPLICE CORES
Part#
10 Pack
Description
NA11
NA11-PK10
NA11S
NA11S-PK10
COUPLINGS
Part#
10 Pack
Description
HXNUT13
N/A
Loose-Wound
32 |
Duracable Catalog
A2G
1/2" Slip Joint
NA11
1/2" Splice
Core End
NA11S
1/2" Splice
Core Hex
HXNUT13
Coupling Sleeve
CABLE
Cable 5/8"
CABLE
Part#
Description
5/8" CABLE
CH62-080
CH62-100
CH62-120
CH62-CUS
CI62-025
CI62-050
CI62-080
CI62-100
CI62-CUS
Please specify if
you would like ends
on your cable when
ordering.
10 Pack
Description
A4D
A4DK
n/a
A4DK-PK10
GEFC62
N/A
S62F
N/A
R92810
N/A
RLPIN7
N/A
Cable Comparison
Hollow-Core
A4D
5/8" Female
GEFC62
5/8" Female
S62F
5/8" Female
R92810
5/8" Female
Inner Core
Part#
10 Pack
Description
A2DK
A2DK-PK10
GEMC62
N/A
S63M
N/A
R92805
N/A
Cable-In-Cable
Oil-Tempered
Loose-Wound
S63M
5/8" Male
GEMC62
5/8" Male
R92805
5/8" Male
10 Pack
Description
A2JD
A2JD-PK10
SPLICE CORES
Part#
10 Pack
Description
A1D
A1D-PK10
COUPLINGS
Part#
10 Pack
Description
HXNUT24
N/A
A1D
5/8" Splice Core End
A2JD
5/8" Slip Joint
HXNUT24
Coupling Sleeve
Duracable Catalog
| 33
Cable 11/16"
CABLE
Part#
Description
11/16" CABLE
CH69-080
CH69-100
CH69-110
CH69-120
CH69-130
CH69-150
CH69-CUS
CH69-110LW
CI69-080
CI69-100
CI69-110
CI69-120
CI69-150
CI69-CUS
OH69-080
OH69-100
OH69-110
OH69-120
OH69-130
OH69-150
OH69-CUS
CC69-025
CC69-050
CC69-100
CC69-110
Please specify if
you would like ends
on your cable when
ordering.
10-Pack
Description
A4J
A4J-PK10
A4JK
A4JK-PK10
S68F
N/A
RLPIN6
N/A
10-Pack
Description
A2NK
A2NK-PK10
S69M
N/A
68563
N/A
.76 lbs.
.77 lbs.
.77 lbs.
.94 lbs.
Cable Comparison
Hollow-Core
Inner Core
Featuring a nylon floating strand which works against cable kinking and
breakage. The nylon inner core gives more life to the cable at a small
cost and doesnt add much weight to the cable.
S68F
11/16" Female
A4J
11/16" Female
A2N
11/16" Male
S69M
11/16" Male
10-Pack
Description
A2J
A2J-PK10
SPLICE CORES
A1J
A1J-PK10
A1JS
A1JS-PK10
COUPLINGS
HXNUT25
N/A
Cable-In-Cable
Also designed for long, straight runs, cable-in-cable is the stiffest cable
we manufacture. The inner cable makes it more durable and therefore,
less likely to break.
Oil-Tempered
This cable is made of a stiffer material and is designed for long, straight
runs. Because of the stronger material, the cable pushes like a rod
through line blockages.
A2J
11/16" Slip Joint
A1J
11/16" Splice
Core End
A1JS
11/16" Splice
Core Hex
HXNUT25
Coupling
Sleeve
Loose-Wound
34 |
Duracable Catalog
CABLE
Cable 3/4"
CABLE
Part#
Description
3/4" CABLE
CH75-050
CH75-080
CH75-100
CH75-110
CH75-120
CH75-130
CH75-140
CH75-150
CH75-CUS
CH75-100LW
CI75-050
CI75-080
CI75-100
CI75-110
CI75-120
CI75-130
CI75-140
CI75-150
CI75-CUS
CI75-050LW
CI75-100LW
CI75-CUS
OH75-080
OH75-100
OH75-110
OH75-120
OH75-130
OH75-150
OH75-CUS
CC75-025
CC75-050
CC75-075
CC75-100
Ideal for those heavy jobs when you need a stiff cable, 3/4"
cable is great for ripping roots in 3" to 10" lines. For a rod
effect in long straight lines, try 3/4" inner core.
FEMALE END FITTINGS
Part#
10-Pack
Description
A4K
A4KK
A4K-PK10
A4KK-PK10
GEFC75
GEFC34
N/A
N/A
S74F
R92885
RLPIN6
N/A
N/A
N/A
R92885
3/4" Female
GEFC75
3/4" Female
A4K
3/4" Female
10-Pack
Description
A2KK
A2KK-PK10
GEMC75
A6K
S75M
N/A
N/A
N/A
76563
76563K
R92880
N/A
N/A
N/A
Please specify if you would like ends on your cable when ordering.
Cable Comparison
Hollow-Core
GEMC75
3/4" Male
A6K
3/4" Male
76563
3/4" Male
Inner Core
Part#
10-Pack
Description
A2JK
A2JK-PK10
Cable-In-Cable
A1K
A1KS
A1K-PK10
A1KS-PK10
COUPLINGS
HXNUT25
N/A
Loose-Wound
R92880
3/4" Male
SPLICE CORES
Oil-Tempered
S75M
3/4" Male
A2JK
3/4" Slip Joint
A1K
3/4" Splice
Core End
A1KS
3/4" Splice
Core Hex
HXNUT25
Coupling Sleeve
Duracable Catalog
| 35
CABLE ACCESSORIES
BLADE KITS
Part#
Description
DKIT1
DKIT2
DKIT1
EZ-LOCK TOOLS
EZ02
EZ03
EZ-Lock Kit
EZT001
EZT002
EZT003
EZT004
EZT005
EZT006
EZT007
EZT008
LOCTITE PRODUCTS
LN7649
LRC680
21347
68015
680KIT
1) EZT001
slip joint
2) EZT002
11/16"
hex socket
3) EZT003
1/2"
hex socket
4) EZT004
3/8"
hex socket
5) 21347
6) 68015
25 gram
10 ml Loctite
Loctite Primer
Retaining
Compound
1
2
3
4
5
6
EZT008
EZT009
EZT006
EZT005
EZT007
36 |
Duracable Catalog
CONE CHUCKS
Part#
Description
Part#
Description
C1
MC55
C1J
C65FS
C1JT
C65UF
C2JT
Slip Joint Chuck with long male end, fits 3/8" threads
C65UJ
CXA
C65SJ
CS3
C60FS
CS3J
C60UF
C2JU
C60SJ
C2NU
Universal Chuck
C60MSJ
76563
Sphere Joint Chuck with long male end, fits 3/8" threads
M60SJ
76763
Sphere Joint Chuck with short male end, fits 3/8" threads
7722
33563
7768K
7775K
C65
Female Sphere Joint Chuck with short male end, fits 3/8"
threads
No. 1 Cone Chuck Set 65
7776K
C60
C60M
Part#
Description
M60
HXNUT7
M60M
MC60
MC60M
MC34
MC36
WA22
MC38
WA10
RCCS
Threaded Spindle
HKEY1
73763K
C1
C1JT
C1J
CS3J
C2JT
C2JU
RCCS
HKEY1
CXA
C2NU
CS3
Cone Chucks
C65
MC34
C60MSJ
7722
Duracable Catalog
| 37
SPEARHEAD BLADES
Part#
Description
HDC25
HDC25J
HDC35
HDC35J
HDC45
CH1
CH2
CH2J
HDC25
HDC25J
HDC45
CH1
CH2
CH2J
GREASE CUTTERS
Part#
Description
NF3
NF4
NF5
NF6
NF8
Grease Cutters
Part#
Description
CRS
Spring-Type, fits 3/8" threads (14.5" long), 5/8" - 11/16" - 3/4" Female End
A4JR
CRSJ
A2JR
CR
CR1
CR2
CRHJ
CRHJ3
CRHS
Auger-type, fits 3/8" threads (5.5" long), Male Ends, 5/8", 11/16", 3/4"
CRHS3
Auger-type, fits 3/8" threads (3" long), Male Ends, 5/8", 11/16", 3/4"
EW
CP
Cable punch
CEO
CXA
End fitting Adapter (converts 1/4" threads to 3/8" threads and vice versa)
NF5
NF6
NF3
NF4
NF8
CRHJ
38 |
Duracable Catalog
CR
CRS
1/4" SIZE
THREAD
Description
50001-PK10
50002-PK10
50003-PK10
50004-PK10
50006-PK10
50008-PK10
50001
50003
50006
50010
50012
50015
75036
75038
75001
75002
75003
75009
75010
75011
Description
50010-PK10
50011-PK10
50012-PK10
50013-PK10
50015-PK10
50017-PK10
EXTRA THICK HEAVY SINK BLADES (WITH FLAT BOTTOM) FITS 1/4" TO 1/2" CABLE (THICKNESS: .050 - WIDTH: .750)
Part#
Description
75036-PK10
75037-PK10
75038-PK10
75040-PK10
Description
75001-PK10
75002-PK10
75003-PK10
75005-PK10
75006-PK10
75007-PK10
75008-PK10
75009-PK10
75010-PK10
75011-PK10
75012-PK10
75013-PK10
75014-PK10
75016-PK10
75017-PK10
75018-PK10
75019-PK10
75042-PK10
75044-PK10
75045-PK10
75047-PK10
1" Single
1" Single Saw
1" Round
1-1/2" Single
1-1/2" Single Saw
2" Round
2" Round Saw
2-1/2" Pear Saw
2-1/2" Round Saw
3" Round
3" Pear
3" Pear Saw
3" Saw
4" Round
4" Pear
4" Pear Saw
4" Round Saw
3" Elliptic
3" Elliptic Saw
4" Elliptic
4" Elliptic Saw
75012
75042
Duracable Catalog
| 39
Description
10001-PK10
10002-PK10
10003-PK10
10004-PK10
10006-PK10
10007-PK10
10008-PK10
10009-PK10
10010-PK10
10052-PK10
10053-PK10
10055-PK10
10062
10072
10073-PK10
3" Pear
3" Pear Saw
3-4" Offset
3-4" Offset Saw
3-5" Offset Saw
4-6" Offset
4-6" Offset Saw
4" Pear
4" Pear Saw
3" Elliptic
3" Elliptic Saw
4" Elliptic Saw
3" Heavy Pear Paddle Saw (Single Only)
4" Heavy Pear Paddle Saw (Single Only)
2-1/2" Heavy Pear Saw
Description
72301-PK10
72302-PK10
72303-PK10
72304-PK10
72305
72306
72308
72401-PK10
72402-PK10
72403-PK10
72404-PK10
72602-PK10
3" Single
3" Single Saw
3" Pear
3" Pear Saw
3" Pear Paddle (Single Only)
3" Pear Paddle Saw (Single Only)
3" Single Paddle (Single Only)
4" Single
4" Single Saw
4" Pear
4" Pear Saw
6" Pear Saw
Description
75020-PK10
75023-PK10
75024-PK10
75025-PK10
75027-PK10
75028-PK10
75029-PK10
3" Single
4" Single
4" Single Saw
4" Single Ground Inside
6" Single
6" Single Saw
6" Single Ground Inside
Duracable Catalog
10002
10003
10004
10052
10053
10062
10072
72301
72302
72304
72305
72401
72402
72303
72308
75020
40 |
10001
75022
75024
7722
75028
BLADES
Blades for 5/8" to 3/4" Cable
WIDE BLADES (WITH V-BOTTOM) - FITS 5/8" TO 3/4" CABLE 10 PACK (THICKNESS: .072 - WIDTH: 1.000)
Part#
Description
10013-PK10
10014-PK10
10015-PK10
10017-PK10
10018-PK10
10019-PK10
4" Single
4" Single Saw
4" Single Ground Inside
6" Single
6" Single Saw
6" Single Ground Inside
10015
10018
10019
Description
75035
Description
12502
12503
75035
(P Series)
10031
(PW Series)
12501
(RH Series)
12504
(RJ Series)
Part#
Description
12504
12505
12506
Duracable Catalog
| 41
R62747
Description
R62747
R68967
Description
R68967
42 |
Duracable Catalog
TOOLS
RIDGID ProPress
Press Tools offer a lock-on cycle feature at completion to ensure the same reliable, watertight joint every time. These tools
are backed by a RIDGID Lifetime Warranty. When using the tool, the ram returns to the start position automatically to provide
maximum speed with every connection. There is also a closure sensor to prevent the cycle from starting if the jaw pin is not fully
engaged to prevent damage to the tool. The press tools also offer an automatic reminder when calibration and maintenance is
necessary and a low battery sensor alerts the user when there is not enough battery power.
RP 200-B
The Ridgid RP 200-B gives contractors another option for a fast and reliable to join copper, stianless steel and PEX. The in-line form
of the tool allows access to tighter spaces, enabling press connections in difficult to reach areas. More than 250 presses per charge
for job site efficiency with standard battery. Kit includes press tool, (2) advanced lithium 2 batteries, charger and carrying case.
RP 210-B
The RP 210-B is more compact and 25% lighter than the previous compact tool. It offers a convenient pistol-style grip and a 270
degree swivel barrel. Kit includes press tool, (2) 18V advanced lithium 2 batteries, 18V advanced lithium battery charger and
carrying case.
RP 340
Built to impress! The Ridgid 340 is available in a battery or corded version. The redesign of the Ridgid 330 Press tool is now 30%
smaller and 17% lighter than the earlier version. This tool can complete more than 400 presses per charge with the battery.
Battery kit includes: press tool, (2) 18V advanced lithium 2 batteries, 120V advanced lithium battery charger and carrying case.
Corded kit includes: press tool, AC power adapter and carrying case
Description
R43428
R31028
R31038
RP 210-B Battery Press Tool with PureFlow PEX Jaws (1/2" to 1")
R43353
R43358
R43368
R43373
RP 200-B
RP 340
Duracable Catalog
| 43
Flushing Bags
The next time you need to flush grease and mulch from
lines after cleaning them with blades or wire brushes, try
a flushing bag that can be used with a standard garden
hose. The FB36 is a rubber flushing bag, while the others are
canvas.
Part#
Description
TPT3
TPT4
TPT5
TPT6
TPT7
TPT8
FLUSHING BAGS
Part#
Description
FB1-1/2
FB2
FB3
FB4
FB6
FB36
Hisco probes are constructed of 1/2" fiberglass which means that they will not conduct electricity. They also do not
transmit heat or cold or absorb moisture which keeps your tools from warping. Probes are also offered in a blunt tip
version. The rounded tip is safer for probing lines that are prone to puncture.
FIBERGLASS UTILITY PROBES
Part#
Description
HIUP-36
HIUP-42
HIUP-48
HIUP-36B
HIUP-42B
HIUP-48B
HIEP-48
HIEP-60
HIEP-48B
HIEP-60B
HI36PE
Fiberglass
DOES NOT CONDUCT
Electricity
The Manhole Cover Hook by Hisco features 1/2" steel rod with a vinyl coated t-handle.
MANHOLE HOOK BY HISCO
Part#
Description
HIMHH25
HIMHH40
44 |
Duracable Catalog
TOOLS
Steel Pipe Locators Manufactured by Duracable
Pipe Locators come in three diameters
(1/4", 5/16", 3/8") and six lengths
(4', 4.5', 5', 5.5', 6'). When purchasing
the Pipe Locator, you automatically
get the handle while being able to
specify the rod size. The rod
PL54-4
(pipe locator)
can be screwed into and out of
the handle. You may desire to
purchase several different size
rods without handles to
accommodate different jobs.
Description
Rod Part#
Handle Part#
PL54-4
PLR54-4
PH1
PL54-4.5
PLR54-4.5
PH1
PL54-5
PLR54-5
PH1
PL54-5.5
PLR54-5.5
PH1
PL54-6
PLR54-6
PH1
PL55-4
PLR55-4
PH1
PL55-4.5
PLR55-4.5
PH1
PL55-5
PLR55-5
PH1
PL55-6
PLR55-6
PH1
PL56-4
PLR56-4
PH1
PL56-4.5
PLR56-4.5
PH1
HT007
(smart stick)
SMARTSTICK
WATER PROBES
Part#
Description
Part#
Description
HT007
HT012
HT008
HT013
HT009
HT050
HT010
HT051
HT011
HT054
Part#
Description
HT014
HT015
HT016
HT059
HT017
HT060
HT018
HT057
HT012
(water probe)
HT014
Duracable Catalog
| 45
MIGHTY PROBE
Part#
Description
Part#
Description
HT001
HT002
HT003
HT004
HT048
HT005
HT049
HT006
HT058
HT072
HT065
HT024
HT025
HT026
HT027
HT028
TOMMY HOOK
Part#
Description
HT029
HANDY HOOK
Part#
Description
HT021
HT023
HT028
HT029
46 |
Duracable Catalog
HT021
Description
93500001
93500003
93500004
93500005
93500006
93500007
93500008
CP004
CP005
CP006
COP15
COP20
COP25
COP30
COP35
93500001
CP004
OTHER TOOLS
Part#
Description
HT068
HT069
HT071
HT037
HT038
HT039
HT040
HT061
HT041
HT062
HT042
HT043
Rod Coupler
HT044
HT071
HT045
93500008
COP15
Duracable Catalog
| 47
WHEEL COVERS
Part#
Description
CW001
SHOE COVERS
Part#
Description
CS001
COVERALLS
Part#
Description
COVERALLXL
Disposable Coverall - XL
COVERALLXXL
COVERALLXXXL
COVERALLXL
GLOVES
Part#
Description
RGLOVE
PREM. GLOVES
GL002
GL003
LGLOVE
UGLOVE
UGLOVE1
MITTPR
R59205
R59295
RGLOVES
GL002
48 |
Duracable Catalog
PREM. GLOVES
LGLOVE
UGLOVE
MITTPR
Slither Hose
The cover on the Slither hose is ultra slippery which allows the hose to manuever around and through difficult
bends.
Armour Belt
Add life to your jetter hose by purchasing Armour Belt. When the application calls for extremem durability while
maintaining flexibility, Armour Belt is ideal for the demanding and harsh environment. It also improves cut and
abrasion resistance.
High Burst
High Burst hose operates at 4,000 psi, similar to green hose, but features a thermoplastic inner tube which increases
durability.
PIR ANHA JET TER HOSE
ITEM
ITEM DESCRIPTION
LLRDMF08X25
1/2" x 25' Red Leader Hose, 5000 PSI, Male Fitting and Female Adapter
LLGRMM04X200
LLGRMM04X300
LLGRMM04X500
LLGRMM06X200
LLGRMM06X300
LLGRMM08X200
LLGRMM08X300
LLGRMM08X400
LLGRMM08X500
LLGRMM08X600
LLRDMM04X300
LLRDMM08X300
SLGRMM08X500
SLGR04X200
SLGR06X200
SLGR06X300
SLGR08X500
SLRDMM08X200
SLRDMM08X500
Duracable Catalog
| 49
JETTERS
KJ-3100 Machine
The RIDGID KJ-3100 portable water jetter gives you 3000 psi
actual working pressure to handle large commercial and industrial
applications. This jetter propels a highly flexible and lightweight
hose through 2" to 10" lines blasting through sludge, soap, grease,
and sediment blockages. As you pull the hose back, it power scrubs
the line flushing debris away and restoring drain lines to their full,
free-flowing capacity all without the use of harmful chemicals.
Powerful: Actual working pressure of 3000 psi and flow of 5.5
GPM for fast, effective
cleaning of lines.
Lightweight Hose: Hose with nylon braid provides significant
weight reduction and
increased flexibility all
without reducing strength. Allows the thrust to propel the hose
further down the line.
Complete: With the KJ-3100s removable hose reel, there is no
need to purchase expensive
portable hose reels. Standard packages comes with a foot valve
and is equipped to handle
indoor and remote applications.
Convenient: Completely remove the hose reel to ease loading
onto service trucks. Simply
rotate the hose reel forward to gain full access to the engines gas
tank and air filter.
Maneuverable: In the heavy-duty 3000 psi jetter category, the
RIDGID KJ-3100 is one of the most maneuverable jetters on the
market.
The unit, on its unique 23" wide two-wheeled cart,
R37413
easily fits through standard size doors and can easily negotiate tight
turns.
Pulse Action: Activate the KJ-3100s pulse action to easily
negotiate difficult bends and traps.
Quality & Dependability: Triplex pump with corrosion-resistant, forged brass head. Gear reducer allows pump to run at slower
(optimal) speed. Reduced number of fittings, hoses and parts minimizes leaks and downtime keeping you on the job.
Quick Startup: 16 HP Recoil start gasoline engine starts easily.
KJ-3100 - RIDGID
Part#
Description
R37413
KJ-3100 Portable Jetter with propulsion nozzle, penetrating nozzle, root-cutting nozzle, H-38 hose
reel, 3/8" x 200' jet hose, pressure wash package, FV-1 foot valve and nozzle cleaning tool.
50 |
Duracable Catalog
KJ-1750 Machine
This jetter propels a highly flexible hose through lines, blasting through sludge,
soap and grease blockages. As you pull the hose back, it power-scrubs the line,
flushing debris away and restoring drain lines to their free-flowing capacity.
The actual working pressure of 1750 psi and flow of 1.4 gpm makes for fast,
powerful, effective cleaning of lines and can be operated in two pulse action
levels. The 2.0 HP motor draws a maximum of 17 amps which requires a 20-amp,
115-volt circuit.
Nozzles
The KJ-1750 comes with five different nozzles. Two propulsion nozzles, two
penetrating nozzles, and a drop-head nozzle which helps negotiate difficult
bends and traps. The propulsion nozzle is a general purpose nozzle that works
well in most applications. The penetrating nozzle features an additional forward
pointing jet that blasts a hole in solid ice or sludge blockages.
Maneuverability
The optional H-30 cart rolls the jetter and hose to the job site. The jetter is easily
removed from the cart in seconds for hard-to-reach drains or remote storage. The
optional adapter allows the KJ-1750 to be mounted on the compact H-10 cart.
R62687
KJ-1750 - RIDGID
Part#
Description
R62687
KJ-1750 electric jetter with dual pulse, NPT nozzles, 50' x 1/8" sink trap hose, nylon storage bag and
the nozzle cleaning tool.
KJ-1750 electric jetter with dual pulse, NPT nozzles, 50' x 1/8" sink trap hose, 110' x 1/2" jet hose,
nylon storage bag, nozzle-cleaning tool, and the H-30 cart.
R62697
Duracable Catalog
| 51
JETTERS
MV80 Machine
MV80-2053
The MV80 jetter is a mainline jetter for cleaning and maintaining municipal
main lines from 3" to 10". The MV80 has a 12 gallon float tank that keeps up with
the 8.0 gpm using a garden hose or utility sink water source. It has a stainless
steel frame which resists corrosion. A UDOR positive displacement super-duty
triplex pump provides rated pressure and flow.
RPM/Drive
The 24 HP Honda motor is standard and operates at 3000 psi for plenty of
cleaning action for silt, sand, scale, grease, soap and ice. Water flows at eight
gallons per minute, a sufficient flow to flush loosened obstructions and debris.
Nozzles
The MV80 comes with three nozzles that cover most applications. The cornering nozzle has three rear jets at a 45-degree flushing
angle and one 90-degree side jet to assist through corners. The blind thrust nozzle has four rear jets at a 25-degree thrust angle for
maximum pulling power, for use in plugged lines or for runs of more than 150-feet. There are no forward jets on the blind thrust
nozzle. The penetrating thrust nozzle has three rear jets at a 25-degree thrust angle for maximum pulling power, and one forward
jet at a zero-degree angle. This is for use in plugged lines or for runs of more than 150-feet.
MV80
Part#
Description
MV80-2053
MV80 Portable Jetter with three nozzles, heavy-duty reel cart with large and small reel, 50' of
jumper hose for remote operation, 3/8" x 250' hose, nozzle cleaning tool, goggles, and gloves.
MS80 Jetter (No Wheels) with three nozzles, heavy-duty reel cart with large and small reel, 50' of
jumper hose for remote operation, 3/8" x 250' hose, nozzle cleaning tool, goggles, and gloves
MS80-2503
STANDARD EQUIPMENT:
Multi-Sensor
Big Foot
Heavy-Duty Carrying
Case
Carry Strap
Housing Bracket
Sounds Rods
XLT-30 option
D Big Foot
& Multi-Sensor
Microphones
52 |
Duracable Catalog
LOCATION SYSTEMS
Gen-Ear Water Leak Location System
GR-LE
With the Gen-Ear water leak location system, you can pinpoint water leaks in
residential and commercial water lines. Use it to locate leaks under concrete slabs, in walls,
swimming pools and hot tubs. The Digital Spectrum Analyzer has 16 filter combinations,
LED display, low battery indicator light and volume control housed in a heavy-duty case.
The safety switch shuts down the system when the headphones are removed, to extend
the battery life. A power light blinks when the batteries are low. It includes a neck strap
and operates on six AA batteries. Use the ground sensor for locating water leaks through
hard surfaces such as concrete, asphalt and tile. Use the probe sensor for locating water
leaks under soft surfaces such as grass or carpet or as a contact probe on above-ground
pipes or hydrants.
R96967
NaviTrack II Locator
The NaviTrack II Locator tracks energized lines with ease. For users who locate both remote
transmitters and energized lines on a regular basis, NaviTrack II is the fastest, easiest, most versatile
locator. You can approach the transmitter from any direction for faster, more accurate locates. Just
maximize the signal and the locate is complete. You can verify the locate by using the large mapping
display. The depth measurement is continuous and depths of greater than 15 can be read.
R21893
LOCATION SYSTEMS
Part#
Description
GR-LE
R96967
R21893
R22163
R19238
R22163
Duracable Catalog
| 53
R21903
The SeekTech ST-510 Transmitter is great for tracing buried cable, TV lines, phone lines and
other metallic lines that can carry an electromagnetic signal. It features a direct connect using
attached clips, induction from the optional inductive signal clamp and induction from the
transmitter coils. It has an LCD display and weighs only 8.9 pounds.
Floating Transmitter
The Floating Transmitter is ideal for locating septic tanks. It features a 512Hz signal, is battery
powered and is flushable. A flashing LED indicates that the sonde is transmitting.
NaviTrack Brick
The NaviTrack Brick is great for tracing buried cable, TV lines, phone lines and other metallic
lines that can carry an electromagnetic signal. It has fully variable five watts of power output.
The NaviTrack Brick is lightweight and easy to carry. It comes with a conductive ground rod
and two 10 connectors. It comes with six C-cell batteries with a life greater than 120 hours.
R19793
Remote Transmitter
The remote transmitter can be attached to a drain cleaning cable or a water jet hose to locate
the remote transmitter in a line. A flashing LED indicates that the sonde is transmitting. Three
ends, manufactured by Duracable Corporation, are available to attach the Remote Transmitter
to Duracables DuraFlex Cables. To fit 1/4" threads, ask for Part# RDT1K. To fit 3/8" threads,
ask for part # RDT2K. For a slip joint, ask for Part# RDT3K.
R20168
SeeSnake FleXmitter
With a SeeSnake FleXmitter you can locate a camera in a line. If your SeeSnake camera is not
equipped with a transmitter, you can upgrade your camera with a FleXmitter.
R16728
The Inductive Signal Clamp allows users to apply a signal to a cable or pipe when connecting
directly to the target conductor is not possible. The clamp couples the transmitting signal
onto the conductor which then allows users to locate using a compatible receiver. Two built in
LEDs inform the user the clamp is functioning properly. An integrated adapter allows users to
attach a hotstick for out of reach lines. It is compatible with the NaviTrack Brick.
R15323
LOCATION ACCESSORIES
Part#
Description
R21903
R19793
R20168
NaviTrack Brick
R16728
Remote Transmitter
RDT1K
RDT2K
RDT3K
R15323
R15828
Mini-SeeSnake FleXmitter
R20973
54 |
Duracable Catalog
R20973
CAMERA SYSTEMS
RIDGID Hand-Held
Cameras
RIDGID micro CA-300
R37888
Description
R36153
R37113
R37098
R37103
R37083
R33113
THERMOMETER
R36153
Duracable Catalog
| 55
R33103
Description
R40798
ACCESSORIES
R33108
R33113
56 |
Duracable Catalog
CAMERA SYSTEMS
CS65 Monitor
The CS65 Monitor is a complete reporting solution. It features one-touch
image and video capture directly to one or two USB drives and has a built-in 1
TB hard drive. The CS65 mounts to the SeeSnake Max rM200 for easy transport
and storage.Easily add on-screen titles and annotate captured media with the
built-in keyboard and automatically generate high quality multimedia reports.
CS6 Monitor
The CS6 Monitor can be used as a hand-held monitor, but can also stand-alone
with it's unique handle. It mounts to the SeeSnake MAX rM200 docking handle for
easy transport and storage. The CS6 and CS6Pak have the same great software and
reporting capabilities in two distinct form factors.
R48133
CS6Pak Monitor
The CS6Pak Monitor features lithium-ion battery power or can be used
with an AC power adapter. This monitor can record to USB drive and can
record both still images and video. It also has a push-button interface which
provides easy operation of lights, transmitter, screen settings, and functions.
R45143
CS10 Monitor
The CS10 monitor is a durable, easy-to-use, digital recording monitor. The
one-touch recording allows you to record snapshots and video clips directly
to a thumb-drive and hand it directly to your customer for review. The 12.1
display allows you to operate the monitor in bright outdoor environments.
Paired with SeeSnake HQ software, you can edit, take still shots from video,
and create reports to deliver to your customers
RIDGID MONITORS AND RECORDERS
Part#
Description
R45163
CS65 MONITOR
R48133
R48123
CS6 MONITOR
R45143
R45138
CS6PAK MONITOR
R45163
R45158
CS10 MONITOR
R39338
R39328
R39338
Duracable Catalog
| 57
Description
R14053
R14058
R13988
R13998
R14063
R48448
R14058
Description
R42348
R42348
58 |
Duracable Catalog
CAMERA SYSTEMS
RIDGID Laptop Interface System
The SeeSnake LT1000 Laptop Interface allows you to leverage the power and flexibility
of a Laptop with your SeeSnake reels. By using a Laptop as a monitor, your recording and
monitoring options are as powerful as your PC. Digital recording, DVD burning, Wireless
Transmission and Online Hosting are all possible with the LT1000 and a Laptop.
RIDGID VIDEO INSPECTION SYSTEMS
Part#
R35973
Description
Laptop Interface System with software, stabilization system, battery and charger
R35973
R36663
R36653
ROLLER SKID
Part#
Description
URS1
URS1-L
URS1-S
URS1-3WK
URS4
Duracable Catalog
| 59
Phone Orders
Fax Orders
To order by fax, please be sure the order is legible
and complete. After filling out your order, fax to
515-223-4220.
Mail Orders
Please fill out your order completely and legibly.
Incomplete information may cause delays. Mail
orders to:
Duracable Manufacturing, Co.
300 Ashworth Road
West Des Moines, IA 50265
Methods of Payment
There are three methods of payment available:
1. Open account. A line of credit is determined by
Duracable Manufacturing Co.. You will be billed
for all purchases.
2. C.O.D. (Cash on delivery)
3. Visa, MasterCard, Discover or American Express.
Specify when ordering.
60 |
Duracable Catalog
Credit Policy
Net 30 days. All balances must be paid within 30
days of invoice date. Please allow three to four
days for postal delivery.
Late Fees
All balances over 30 days past due will be subject
to a 1-1/2% monthly late charge (18%).
ORDERING INFORMATION
the serial number and model number of the item
and state the reason for the return in writing. You
also will need a copy of your original invoice. If
returning cable, include the Inventory Tag and a
minimum of seven feet of cable. Please give the
Invoice Number to your account manager and
provide a copy in the shipment. Your account
manager will provide you with a Returned Goods
Authorization number (RGA). This number must
be identified on the outside of the package. Items
returned without an RGA on the outside of the
package will be returned. After 60 days the RGA
will expire and returned items received will be
charged a 20% restocking fee. When returning
items, if they are not properly packaged, they will
be refused and returned to you and credit will
be denied. If the item is packaged in the original
carton, the carton must be in reusable condition.
Duracable will credit reasonable shipping costs
for items deemed defective by the manufacturer
within the warranty period. Include a copy of the
receipt from the shipping company for possible
credit of freight. All unnecessary freight shipments
will not be paid. No C.O.D. returns will be accepted.
Goods for which credit is denied will be scrapped
unless otherwise noted.
Non-Returnable Goods
The following items may not be returned:
goods more than 90 days old; goods that were a
special order; goods purchased that have been
discontinued; goods that are unacceptable
for resale; goods returned without proper
documentation; goods returned without an RGA
number; machines without a serial number; partial
cases of goods; and goods not in the original
carton or case.
Jetters
Warranties
Drain Care Products
ProClean Drain Care Products are guaranteed for
one year from the date of purchase. Duracable will
replace the product, not the retail purchase price.
For RootX, you must make a claim within one year
of purchase, not within the first year of application,
and Duracable will replace the product.
Cable
DuraFlex cable is guaranteed for 30 days against
material defects. If returning cable, the cable
inventory tag must accompany the return with a
minimum of seven feet of cable.
Machines
All machines need to be returned to the
manufacturer for repair or replacement. Duracable
Drain Cleaning Machines have a two-year warranty
on the frame and motor from the date of purchase.
There is a three-year warranty on the frame and
gearbox from the date of purchase for the Model
DM55, DM162 and DM175.
Repairs
GFCI Cord
Reels
Polyethylene reels are covered with a three year
warranty. Metal reels have a two year warranty.
Foot Pedals
The rubber air foot pedal has a two-year warranty
and the metal air foot pedal has a one-year warranty.
If you, the customer, have purchased a Model 1100
or Model DM125 machine and later purchase an air
foot pedal, you will VOID the warranty if you install
the foot pedal yourself. To keep the warranty valid,
you must ship the machine back to Duracable
Manufacturing Co. for the installation of the air foot
pedal. A labor fee will be charged.
Duracable Catalog
| 61
CREDIT APPLICATION
300 Ashworth Road West Des Moines, IA 5025 Phone: 800-848-3375 Fax: 515-223-4220
Firm Name:_______________________________________________________________________________________________________________
Street Address: ______________________________________ Phone:___________________________________ Fax:_________________________
City:_______________________________________________ State:_____________________________________ Zip:__________________________
Full name of owner or owners (or an authorized officer of corporation). List home address and zip code for partnership or individual.
________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________
o Individual Partnership
o Corporation
TRADE REFERENCES
Name Address City, State, Zip Phone Number
Fax Number
________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________
Name of Bank:____________________________________________________________________________________________________________
Street Address: ____________________________________________________________________________________________________________
City:_______________________________________________ State:_____________________________________ Zip:__________________________
62 |
Duracable Catalog
Firm Name:______________________________________________________________________
By:_____________________________________________________________________________
Signature
Title
By:______________________________________________________________________________________
Signature
Title
ORDER FORM
300 Ashworth Road West Des Moines, IA 5025 Phone: 877-247-4081 Fax: 515-223-4220
SOLD TO: __________________________________________________________ SHIP TO: o Check if same as 'Sold To'
Customer Account # :_________________________________________________ Todays Date:_______________________________________________________
Company Name: ____________________________________________________ Company Name:_____________________________________________________
Contact Name: ______________________________________________________ Contact Name:______________________________________________________
Street Address: ______________________________________________________ Street Address:______________________________________________________
City:_______________________________________________________________ State:____________________________________ Zip: ______________________
City:_______________________________________________________________ State:____________________________________ Zip:_______________________
Phone: ____________________________________________________________ Phone:_____________________________________________________________
Fax: _______________________________________________________________ Fax:_______________________________________________________________
E-mail:_____________________________________________________________ E-mail:_____________________________________________________________
Payment Method:
o Visa
o MasterCard
o American Express
o Discover
o C.O.D.
o Bill My Account
Part#
Description
Unit Price
Total
Duracable Catalog
| 63
Product Catalog
877-247-4081
www.duracable.com
v.15
www.duracable.com
#DCAT15