Anda di halaman 1dari 6

Your Reliable Source for Solid State Amplifiers and Generators

HUKINGS Solid State Microwave Tissue/Tumor Ablation


System Therapy Solution
Microwave ablation is an emerging treatment option for many cancers, cardiac arrhythmias and
other medical conditions. During treatment, microwaves are applied directly to tissues to produce
rapid temperature elevations sufficient to produce immediate coagulative necrosis.
The engineering design criteria for each application differ, with individual consideration for factors
such as desired ablation zone size, treatment duration, and procedural invasiveness. Recent
technological developments in applicator cooling, power control and system optimization for specific
applications promise to increase the utilization of microwave ablation in the future.
Systemic treatments such as chemotherapy and certain types of radiation are absorbed into both
healthy and diseased tissue, whereas microwave ablation is delivered directly into a tumor, or
"locally." Microwave ablation does not provide a cure, but may slow the progression and improve
quality of life. This treatment may be used alone or along with surgery or other therapies;
sometimes, treatment of small lesions with microwave ablation can convert a patient who was unable
to have surgery beforehand to a surgical candidate.

How Microwave Ablation works


Thermal ablation is an emerging treatment option for several conditions, including cancer, cardiac
arrhythmias, varicose veins and menorrhagia. Ablative procedures can be performed at open
surgery, laparoscopically, using catheter-based applicators, percutaneously or transcutaneously.
Minimally invasive ablations are typically performed using imaging as a diagnostic, guidance,
monitoring and treatment assessment tool. Several energy sources are currently used for
hyperthermic ablation, including radiofrequency electrical current, microwaves, laser light, and
focused ultrasound. Each energy source is characterized by particular advantages and
disadvantages in energy application and imaging appearance, which are often application specific.

Address: No. 1408, North of Tianfu Dadao Road, High-Tech District, Chengdu, 610000, Sichuan, China.
Tel: +86-28-8411-1861 Fax: +86-28-6792-0663 Web: www.hukings.com E-mail: info@hukings.com
HUKINGS and its logo are trademarks of HUKINGS or one of its subsidiaries.
Copyright @ 2016 HUKINGS All rights reserved.

Your Reliable Source for Solid State Amplifiers and Generators

Microwave Energy for Tissue Ablation


Microwaves represent the portion of the electromagnetic spectrum between 300 MHz and 300 GHz.
The Federal Communications Commission (FCC) or International Telecommunications Union (ITU)
permit several unrestricted frequency bands for industrial, scientific and medical use in several
regions, including those most commonly used for microwave ablation procedures: 915 MHz and 2.45
GHz. Other frequencies explored for therapeutic applications of microwaves include 433 MHz, and
broadband pulses with the greatest spectral energy density between 1 GHz and 10 GHz.
The transmission of electromagnetic energy is determined by the dielectric permittivity and magnetic
permeability of the media in which the waves propagate. The magnetic permeability of biological
tissues is approximately the same as vacuum. However, the dielectric permittivity is significantly
larger and contains both a real and imaginary component, which are used to define the more
common terms: relative permittivity and conductivity. Relative permittivity, r, is the real part of the
complex permittivity and quantifies the ability to store electrical energy relative to vacuum. It is
frequently referred to as dielectric constant; however, since permittivity is quite variable depending
on frequency, temperature and other factors in biological tissues, the term relative permittivity will
be used here for clarity.
The effective conductivity, of a material is defined from the imaginary part of the complex
permittivity and is used to describe how well a material absorbs microwave energy. It is important to
note that effective conductivity describes contributions from moving charges (electrical current) and
time-varying electric fields (displacement current), specifically the rotation of dipoles in the material
as they attempt to align with and alternating electric field.3 The latter contribution dominates for
most biological tissues in the microwave spectrum. This rotation of dipoles generates heat inside of
lossy materials such as biological tissues, which will be described next.
Components of a Microwave System
The basic microwave system consists of three components: a generator, a power distribution system,
and antennas. Due to shaft heating caused by reflected power, a cooling system is a crucial
component of most microwave antennas and most currently available microwave systems in the US
utilize an antenna cooling mechanism.
Power is generated using either magnetron or solid state power generator (comparison between
them).
Magnetron
Solid state power generator

High power supply (up to 4000V)

DC 28V

Address: No. 1408, North of Tianfu Dadao Road, High-Tech District, Chengdu, 610000, Sichuan, China.
Tel: +86-28-8411-1861 Fax: +86-28-6792-0663 Web: www.hukings.com E-mail: info@hukings.com
HUKINGS and its logo are trademarks of HUKINGS or one of its subsidiaries.
Copyright @ 2016 HUKINGS All rights reserved.

Your Reliable Source for Solid State Amplifiers and Generators

500 hours service life

More than 20 years service life

Big size

Small size

Poor power stability

High power stability

Output power attenuation for long time use

No output power attenuation

Complex power control circuit

Simple control circuit

Microwave generator output can be controlled relatively independent of the tissue type; the
impedance spikes or reduced power output characteristic of RF ablation in high impedance tissues
are not encountered in microwave ablation. Generator frequencies are generally either 433MHz,
915 MHz or 2.45 GHz, as allowed by the Federal Communications Commission To date, there is
limited data to suggest that any given frequency is more effective for microwave ablation
procedures; however, a single preclinical study directly comparing 915 MHz and 2.45 GHz systems
has suggested that a 915 MHz generator frequency used in combination with a cooled shaft
antenna may generate larger ablation zones than a similar 2.45 GHz system. The 915 MHz
ablation zones were also very long and therefore, may be limited in the anatomic areas in which
they can be used. Additional study is needed to identify whether these results are reproducible
and/or tissue dependent.
Distribution of electromagnetic energy from the generator to the antenna is most commonly
accomplished through a coaxial transmission line. Coaxial cables have excellent propagation
characteristics, but as cable diameter decreases, power loss (and associated cable heating)
increases. Thus, there is a limit to how small and flexible the cables can be without resulting in
dangerous cable heating.
Microwave antennas are the final and most critical component of the system, functioning to transfer
energy into tissue. The active heating zone and power coupling efficiency of an antenna is
determined by its geometry. Most microwave ablation antenna designs are straight and needle-like.
Common designs include monopole, dipole, triaxial, choked or slotted antennas. Microwave antenna
design is balance of power efficiency, tissue heating pattern, and antenna diameter with design
tradeoffs necessary to produce a specific desired result. Since antennas are generally constructed
from coaxial cable, smaller-diameter antennas can have trouble handling higher powers without
unwanted thermal damage to tissues around the proximal antenna shaft. Cooling jackets and
antenna shaft cooling systems have been shown to reduce this heating, eliminate skin burns and
increase power handling of smaller-diameter antennas. Shaft heating, Because of the significant
shaft heating that can occur with microwaves, a robust shaft cooling mechanism is required to
minimize thermal damage to the subcutaneous tissues and the skin, especially with the development
of higher power systems.
Circulation of chilled saline or water is the most commonly utilized method for cooling the antenna
shaft, and the addition of active cooling has enabled delivery of higher powers for longer times,
Address: No. 1408, North of Tianfu Dadao Road, High-Tech District, Chengdu, 610000, Sichuan, China.
Tel: +86-28-8411-1861 Fax: +86-28-6792-0663 Web: www.hukings.com E-mail: info@hukings.com
HUKINGS and its logo are trademarks of HUKINGS or one of its subsidiaries.
Copyright @ 2016 HUKINGS All rights reserved.

Your Reliable Source for Solid State Amplifiers and Generators

and in turn, production of larger ablation zones. Another strategy for antenna cooling is the use of
compressed gas, utilized by one system (Certus 140, NeuWave Medical, Madison, WI). Rapid
decompression of carbon dioxide gas causes the Joule-Thompson phenomenon to occur at the probe
tip with gas venting up the shaft and along feed lines. The high cooling capacity of this system
allows the use of high power generators (140 W) while maintaining small shaft diameters
(17-gauge).
Ultimately, the ablation zone size and shape produced by any antenna in live tissue depends on the
antenna design, tissue type (taking into account the changes in the tissue properties during the
ablation), thermal conduction from the active heating zone, and thermal sinks caused by nearby
structures such as blood vessels. The interplay between these various factors is complex and direct
comparisons between the various system designs have not yet been accomplished.
Currently Available Microwave Systems
In the United States, only one FDA-cleared microwave system is widely available for commercial use
(ValleyLab/Covidien). The Evident system is a 13-gauge water cooled dipole antenna with a 915
MHz generator and a maximum recommended output of 45 W. Preclinical testing was first
performed by Wright et al, who demonstrated that simultaneous multi-probe ablations were nearly
6 times larger in volume than single probe ablations. Oshima et al also explored the use of multiple
applicators with this system and found that when spaced 2 cm or less, spherical ablation zones were
maintained, with significant increase in size of the zone compared to those created with a single
antenna. Iannitti et al used this system in a phase II clinical trial to treat 87 patients with hepatic
tumors. Mean follow up to 19 months demonstrated local tumor progression seen in 2.7% and
regional recurrence/new foci of disease in the target organ in 43%. Martin et al also used this
system for a prospective phase II study of microwave ablation of hepatic malignancies
(hepatocellular carcinoma and metastatic disease-most treated operatively) in 100 patients. At
median follow up of 36 months, 5% of patients had incomplete ablation (seen at initial 2 week
follow up imaging), 2% had local tumor progression, and 37% demonstrated intrahepatic
recurrence at non ablated sites. These early results are promising, but the system needs more
extensive in vivo characterization and validation in larger clinical trials before its full potential will
be known
Other systems that have recently received FDA 510(k) clearance or are currently in development
include: the MicrothermX-100 from BSD Medical (Salt Lake City, UT), which uses a 915 MHz
generator and multiple 14-gauge applicators with individual antenna control; MedWaves
AveCure system (San Diego, CA) which uses a 915 MHZ generator and 1216-gauge antennas
with temperature feedback rather than cooling; and the Certus 140 from Neuwave Medical, a
2.45 GHz system under development which supports up to three actively gas-cooled 17-gauge
triaxial antennas (Madison WI).
In Europe, the Acculis Microwave Tissue Ablation system consists of a 2.45 GHz generator, with
Address: No. 1408, North of Tianfu Dadao Road, High-Tech District, Chengdu, 610000, Sichuan, China.
Tel: +86-28-8411-1861 Fax: +86-28-6792-0663 Web: www.hukings.com E-mail: info@hukings.com
HUKINGS and its logo are trademarks of HUKINGS or one of its subsidiaries.
Copyright @ 2016 HUKINGS All rights reserved.

Your Reliable Source for Solid State Amplifiers and Generators

power output settings ranging from 30100 W, and a percutaneous 15-gauge cooled antenna. The
HS Amica microwave system uses a 2.45 GHz generator, with power output to 100 W (60 W
recommended output) through 14-gauge and 17-gauge water cooled applicators.
Microwave ablation performed with HS Amica System. Pre-procedure CT demonstrates nodular
arterially enhancing lesion in the posterior right hepatic lobe (arrow, a), redemonstrated on contrast
enhanced pre-procedure ultrasound (b). Three sequential placements
To date, microwave ablation has been utilized most widely in Japan and China, where multiple
systems have been developed. Most of these systems use 2.45 GHz generators with monopole,
dipole or slotted coaxial antennas. For example, the FORSEA system (Qinghai Microwave Electronic
Institute, Nanjing, China) utilizes a 10150 W, 2.45 GHz generator and 14-gauge water-cooled
antenna. Kang-Yu Medical has both a 915 MHz and a 2.45 GHz generator system (KY2000-915
and KY2000-2,450) with a water cooled 15-gauge antenna. Both generators can produce 1100
W. The Microtaze (Nippon Shoji, Osaka, Japan) also utilizes a 2.45 GHz generator with a
16-gauge cool shaft antenna with outputs between 6070W. For a summary of available systems,
see. Given the substantial limitations in commercially available devices to date, commercial and
academic development is ongoing.
HUKINGS Solid State Power Generator Microwave Ablation System Solution
HUKINGS specially designs for microwave ablation system applying solid state LDMOS
components and key technologies:
1)
2)
3)
4)
5)
6)
7)

8)
9)
10)
11)
12)
13)
14)
15)

Dynamic frequency selection (433MHz, 915MHz, and 2450MHz)


pre-amplifier
digital attenuator
driving power amplifier
final power amplifier
forward and reverse generator detection circuit
other control protections circuits(over heat protection, over load protect, adapt to short
time open load, over current protection, it can automatic shut down when current
abnormal)
MCU control processor,
DB9 remote communication interface
Both manually and automatically for power detection and signal detection
RS485 communication output for working conditions
Adjustable output power
Harmonic wave -30dBc
Power supply: AC 220V or DC
Cooling model: Air cooling / Water cooling

Address: No. 1408, North of Tianfu Dadao Road, High-Tech District, Chengdu, 610000, Sichuan, China.
Tel: +86-28-8411-1861 Fax: +86-28-6792-0663 Web: www.hukings.com E-mail: info@hukings.com
HUKINGS and its logo are trademarks of HUKINGS or one of its subsidiaries.
Copyright @ 2016 HUKINGS All rights reserved.

Your Reliable Source for Solid State Amplifiers and Generators

HUKINGS Some Solid State Generators Solutions for Microwave Ablation System
Model

Frequency

Power

Power supply

Efficiency

Cooling

HKSA-433-100

433

100

28V

65

Air cooling

HKSA-433-500

433

500

220V

65

Air cooling

HKSA-433-1000

433

1000

220V

60

Water cooling

HKSA-915-200

915

200

28V

60

Air cooling

HKSA-915-500

915

500

220V

60

Air cooling

HKSA-915-1000

915

1000

220V

60

Water cooling

HKSA-915-3000

915

3000

220V

60

Water cooling

HKSA-2450-100

2450

100

28V

45

Air cooling

HKSA-2450-200

2450

200

28V

45

Air cooling

HKSA-2450-500

2450

500

220V

40

Water cooling

HKSA-2450-1000

2450

1000

220V

40

Water cooling

To customize you solid state generators for microwave ablation system please email or voice to us
via sales@hukings.com or +86-28-8411-1861.

Issued by HUKINGS
Version2.16

Address: No. 1408, North of Tianfu Dadao Road, High-Tech District, Chengdu, 610000, Sichuan, China.
Tel: +86-28-8411-1861 Fax: +86-28-6792-0663 Web: www.hukings.com E-mail: info@hukings.com
HUKINGS and its logo are trademarks of HUKINGS or one of its subsidiaries.
Copyright @ 2016 HUKINGS All rights reserved.

Anda mungkin juga menyukai