Introduction
The ability to modify and manipulate features is important technique in Pro/E. In this section, you will learn how to use the model tree to
modify various aspects of a feature.
Feature Modification
1.
2.
3.
4.
5.
[Figure 4.1]
6.
7.
8.
[Figure 4.2]
11. Select [Add] from the RELATIONS menu. The screen will look like Figure 4.3.
12. You will now add a relation so that the dimension labeled sd1 is a function of the dimension sd0. Type [sd1=sd0-80] into the
textbox at the bottom of the screen, and press Enter twice.
[Figure 4.3]
13. Select
14. Select
15. Select
16. Select
[Regenerate]. You should notice that dimension sd1 has changed from 180 to 160.
[Modify] from the SKETCHER menu.
dimension sd0 and change it to 220.
[Regenerate]. You should notice that both dimension sd0 and sd1 change, as shown in Figure 4.4.
[Figure 4.4]
17.
18.
19.
20.
[Figure 4.5]
21. Next a round will be added to the edges on the other side of the part. Right click on the Round branch of the model tree and select
[Edit Definition].
22. Rotate the part so that you can see the edges which have not been rounded.
23. Use the left mouse button to select Edge1, Edge2, and Edge3 shown in Figure 4.6.
[Figure 4.6]
24. Click the check button, and rotate the part to make sure all edges are rounded. You should see the image shown in Figure 4.7.
[Figure 4.7]