Basic Seminar
All information, illustrations, diagrams and documentation in the records of SHD may not - even in the form of excerpts - be copied, reproduced nor made
publicly available without prior approval of SHD.
Copyright 2014 by SHD Kreative Planungs-Systeme GmbH & Co. KG
Content
1
General explanations
2.1
2.2
2.3
First steps
3.1
3.2
3.2.1
3.2.2
3.2.3
5
5
6
11
3.3
3.3.1
3.3.2
3.3.3
3.3.4
3.3.5
3.3.6
3.3.7
3.3.8
15
15
20
21
22
25
27
30
32
3.4
3.4.1
3.4.2
3.4.3
3.4.4
3.4.5
33
33
35
36
38
39
3.5
3.5.1
3.5.2
3.5.3
3.5.4
3.5.5
41
41
45
46
47
49
50
4.1
4.1.1
4.1.2
Plan
Displaying worktop symbols
Include virtual walls when printing
52
53
54
Seite i
4.1.3
4.1.4
Zoom tools
Changing the scale
55
55
4.2
4.2.1
4.2.2
4.2.3
Elevation view
Generate Named Elevation Views
Selecting walls
Clipping plane and filtering behind primary wall
56
58
61
63
4.3
4.3.1
4.3.2
4.3.3
4.3.4
Perspective
Active Perspective
Default perspective and Bird's Eye perspective
Navigation mode in the perspective
Auto-Hide Back Facing Walls
66
68
70
71
72
Catalogues
73
5.1
Catalogue types
73
5.2
74
5.3
75
76
6.1
76
6.2
Auto Dimension
77
6.3
Dimension lines
82
6.4
Witness Lines
85
6.5
Guide Rails
86
6.6
Manual dimensioning
89
6.7
Options: Dimensioning
93
6.8
96
6.9
Auto Annotate
97
6.10
Options: Annotate
99
102
7.1
Graphic Items
102
7.2
104
7.3
104
7.4
105
7.5
106
Seite ii
Additional Topics
107
8.1
8.1.1
8.1.2
8.1.3
Style Details
Style Details: Saving favourites
Style Details: Preview
Options: Style Details
107
109
110
111
8.2
8.2.1
8.2.2
8.2.3
8.2.4
Tile plan
Standard tile plan
Tiling Zones
Selecting material for the tiled section
How to assign tiles to a tiling zone
113
116
117
123
132
8.3
8.3.1
8.3.2
8.3.3
Installation plan
Adding installation symbols
How to plan installation symbols
How to delete installation symbols
134
134
137
138
Final steps
139
9.1
139
9.2
Printing offers
140
9.3
Saving plans
142
9.4
142
10
Shortcuts
143
Seite iii
Seite 1
General explanations
2.1
Seite 2
2.2
In this example, the mouse pointer is resting on the icon with which you can
freely rotate a selected item. If you want to learn more about the function, you can
easily see from the description how to search for it in Help. For example, enter the term
"rotate" in the search box and it will give you a list of all topics, in which this keyword
occurs.
Keyboard shortcuts
If a function can also be called up by using a keyboard shortcut, this will also be
displayed in the Quickinfo.
2.3
Here you should be especially careful to avoid planning errors or data loss. Read these
instructions carefully!
Here you will find information about the program environment, e.g. licensing restrictions
/ modules.
Seite 3
Seite 4
First steps
3.1
3.2
3.2.1
Program start
Start KPS designstudio by double-clicking the program symbol on the desktop.
Login
Log in with your login name and password:
Seite 5
3.2.2
Seite 6
In the top area, you can enter two contacts, also with different surnames. When
searching for the customer, the data is under both names. Here, you also provide one
or several telephone numbers under which the customer can be reached.
With the Create button, you save the new customer master data. The program reports
missing data if necessary.
Compulsory fields in the customer master data
When creating new customers, you must fill out the Compulsory Fields so that the
customer master data can be saved. Compulsory fields are highlighted in bold.
You can configure compulsory fields.
Editing existing customer master data
If you would like to supplement or change data, open the customer master data via the
customer search. Click Edit in the top of the window. A mask is displayed just like
when creating a new customer. The name of the customer is also displayed in the title
of the dialogue field. The Create button is replaced by OK.
If a customer was created, you can start the design program and start a plan for this
customer. After closing and saving the plan, you are automatically returned to the open
customer master data.
Seite 7
Communication
In the Tel. field, enter the different telephone, fax, mobile phone numbers and e-mail
addresses. To do this, select the desired entry from the list on the left and enter the
data in the text field on the right:
All entries for which a value has already been entered are highlighted in the selection in
bold.
You define the number of the displayed telephone types that can be used in the
customer master data via tab File
Manage Customer Phone Types.
Consecutive numbers and entry date
When creating a new customer, a consecutive number and the entry data are saved for
each customer master data record. By default, the automatically created consecutive
number consists of the abbreviation of the logged in user and a number. This number
is listed with each customer who the respective user creates.
You can overwrite the automatically created number.
The entry data cannot be changed. It is the date when the customer master data was
saved for the first time.
Seite 8
If you change the customer status in a customer master data record, the changes in
the database are logged.
Which sales representative edits the customer master data?
You can search for customers via the allocated sales representative. This facilitates the
search, in particular, if an another employee starts handling the order.
When creating a new customer, the name of the logged in user is automatically
displayed in the Sales field. If the administrator changes, the sales representative can
be changed.
Select the user who made the sales pitch or consultation and still supports the
customer:
Seite 9
Seite 10
3.2.3
You can:
start new empty plans
mirror or duplicate existing plans
import existing plans
If you expand the Edit button, you can use the following functions:
You can:
open and edit existing plans
edit the design info
export existing plans
delete existing plans
Seite 11
Design Info:
The design information displays the data of the selected plan without opening the plan
itself:
The general plan data is synchronised with the values in the customer details of the
design program. The displayed fields are configured as general data fields.
You can change the assigned plan name when creating a new plan.
The information on the budget and style details has an informative character.
The item list displays the planned items from the manufacturer catalogue. It does
not contain any style details or prices. The item list cannot be edited here.
Why do you export and import plans?
Plans saved as ROM files are used for different purposes outside the database:
You can open the plan at a workstation that is not connected to the database.
For on-site appointments, you work with the design program on a laptop that is not
connected to the central database, but instead uses a local database. After the
customer meeting, you reimport the locally edited file into the central database.
You can import a customer's plan in another customer master data record.
A new customer B would like a similar kitchen as his acquaintance has (customer A).
This kitchen was planned at his location. You can export the finalised plan of the sold
kitchen from the customer master data record A and import it into the new customer
master data record B.
You can import plans from earlier program versions without using the customer
management system.
A customer bought a kitchen from you years ago. He would like to modernise his
kitchen. The plan was created in an older program version without a customer
management system. You can import the old plan in the current program version.
Seite 12
The program suggests a combination consisting of the customer name and plan name
as the file name. You can overwrite the name. The plan is saved with the file extension
.ROM.
How do you import a plan?
You can import an exported plan in another or the original customer master data
record:
If you click the arrow after the New button in the area of the customer data and
then click Import Design(s), the selected ROM file is automatically allocated to the
customer master data from which it was originally exported.
If in an open customer master data record under Designs you click the arrow after
the New button and then click Import, the selected ROM file is added to the open
customer master data record:
Seite 13
Each missing catalogue is reported separately. If you confirm the message, you are
prompted to select a replacement catalogue.
Make sure that you select the most suitable replacement catalogue possible (main
catalogue for main catalogue and electrical equipment for electrical equipment).
Selecting replacement catalogues that do not contain any suitable items may render
the plan useless. The Room Validation Wizard allows you to keep these items as
special parts or delete them. If necessary, you should first install the missing
catalogues and then reimport the plan.
If an imported plan includes a catalogue that was not used, no replacement catalogue
is prompted for this catalogue.
After opening, problems, missing calculations, critical data, etc. are checked and
reported:
Seite 14
3.3
3.3.1
Wall layout
If you start a new design, the Wall Layout Wizard opens. The Wall Layout Wizard
helps you create the plan.
If you design very large rooms, check the options for the room's standard dimensions
before starting the design. If the wall layout is larger than the room's standard
dimensions, the design for the "screen size" option does not completely fit in the
planning area.
By default, the program is provided so that the Wall Layout Wizard is automatically
started after the manufacturer catalogue is selected at the beginning of a new design. If
you have not customised these presettings for your company, the program takes you to
the step for editing the design levels and selecting the styles in the selected catalogue
after you create the wall layout.
If you would like to use a layout drawn in a CAD program, you can import it. To do this,
make sure to close the Wall Layout Wizard.
Which wall layouts can you select?
You can select simple templates. Various forms are recommended: square, L-shape,
U-shape, two parallel walls or one single wall:
Seite 15
The values entered in the options (tab File Options tab Planning Defaults) for
the length, height and thickness (one value for all walls) are suggested in the Wall
Layout Wizard. Adjust the value according to the design. The wall height applies
uniformly for all walls. If you would like to change the thickness of single wall, e. g., to
arrange a window recess, you can subsequently change it in the Items tab.
Seite 16
Seite 17
Mode
You can create walls or gaps.
- Activate this icon to draw gaps using the arrows. Here, you move the cursor
or the starting point of the next wall.
Direction
The arrow buttons are used depending on the selected mode. In Move Cursor Mode,
the cursor moves in the design preview according to the entered value. In Wall Mode,
you add the walls using the arrows.
Enter the length, height and thickness for walls that are planned exactly in the X and Ydirection (horizontal and vertical):
For walls that are to be planned at a specific angle, you can enter the dimensions and
the angle of the next wall or the dimensions of the surrounding right triangle for
calculating the wall:
Seite 18
Options
Using the Undo and Redo buttons, you can incrementally undo or redo the wall
drawing or how the cursor was moved.
You discard the entire wall layout with Restart. The cursor position for the starting point
of the next wall is on the upper left again.
The Complete button is only visible if you have already designed two walls. With this
function, you can close the wall layout. The starting point of the first wall, however, can
be linked with the ending point of the wall most recently drawn. With the Complete
button, you open the dialogue field Enter Dimensions in which the exact values
necessary for completing the layout are suggested. The height and wall thickness can
be changed:
Can you subsequently create the wall layout?
Yes. You can cancel the creation step of the wall layout at the beginning of the design
or delete a created wall layout. If you would like to subsequently create a layout in the
opened design, you will find the function in the Insert tab:
When you subsequently create a layout, you cannot access the design levels and
styles. If you have already designed a layout, you cannot access the functions. This
prevents you from having two wall layout laying over each other.
Seite 19
3.3.2
5. Click OK. The wall layout along with the entered dimensions is inserted into the
plan.
Seite 20
3.3.3
symbol.
symbol.
Seite 21
3.3.4
Height tables
Each catalogue has its own height tables. plinth height, top worktop edge, top wall unit
edge. The height tables are used to define the room height where the new items are to
be added.
Defining height tables when starting the plan
When a plan is started, the Height Table Dialogue always displays the dimensions of
the catalogue that is available for selection at the very top of the list containing all
selected main catalogues in the Select Catalogues for Design dialogue field.
You are prompted to set the height table at the beginning of a new plan. You can
subsequently adjust this table via the Catalogue Info using the Height Tables button.
If you change values during the plan, all newly entered objects along with the changed
values are added to the plan. The objects that were added prior to the change remain
in their original position.
Display all or the preferred height tables. The preferred height tables area is a selection
that includes the most important dimensions.
Increasingly more manufacturer catalogues have saved different series that are
linked with their own height tables. If necessary, select the series with which you would
like to create the plan, for example, with the adjusted dimensions for a higher working
height:
Seite 22
Seite 23
Child and accessory catalogues of one manufacturer use the height tables of the
parent catalogue.
Seite 24
3.3.5
Show Room Options: All styles used in the plan are planning styles. Each time
you add items whose style details are not completely defined or at all, the Style
Details window opens automatically. Under Current Settings, the entries are listed
that you still have to define. The new definitions are added to the planning styles.
If you plan using the worktop, pelmet and plinth automatic functions, the Style
Details window opens so that you can add the necessary details.
Seite 25
- You change the default style of a catalogue. To do this, in the Home tab, click
the Default Style: You select the catalogue for which you would like to edit the
standard default. The selected style is the default style for all items of this catalogue.
- You add a new style to the plan. In the Home tab, click the Selected Style
symbol. The item previously selected in the plan determines for which catalogue the
styles are edited. The Selected Style is a deviation to the default style. It is applied to
the selection.
Catalogue styles and item styles
If you manually open the Style Details window, observe the following settings:
Show Catalogue Options: All styles of the catalogues are part of the catalogue
styles. Some catalogue styles are not automatically prompted (for example, graphic
styles). If you would like to enter them, open the Style Details window via the
Default Style function. Select the Show Catalogue Options entry in the list on the
bottom left of the Style Details window to display all style details of the selected
catalogue.
You can already enter catalogue styles during the first prompt if you already know
at this time that you will be planning the corresponding items. The selected
definition is applied to all items of the catalogue as the default style.
Show Unit Options: If you would like to change the style of one or more items in
the plan, open the Style Details window via the Selected Style function . The
Show Unit Options entry is selected in the list on the lower left. The styles display
is limited to the entries that can be defined for the selection.
Replacing existing styles
If you have entered several style versions via the Selected Style function, you can
assign a style that has already been entered to the plan. To do this, in the Items tab,
select the Selected Style Assign To Existing function:
All styles contained in the plan are displayed in the gallery. If you point the mouse on
the entries, the deviations to the standard style is displayed.
Replaced styles, product ranges and colours that are no longer used by any items are
no longer displayed in the gallery. They are deleted.
Seite 26
Styles in reports
Using the report's program information, you control which style details can be displayed
in the report. The default styles are displayed here. If you have defined styles that are
different from the default styles for individual items, they are written in the relevant
positions. However, only relevant styles are specified in positions. Relevant styles are
the styles that an item actually uses. They are properties that the supplier needs to
correctly deliver the item. Non-relevant styles are definitions of details, which an item
does not even have.
If, in addition to the default styles, you also define deviating styles for individual items in
the plan, e.g. colours, grain, glass or drawer styles, these styles are not relevant for all
the plan items. Instead, they are only relevant for styles that actually use these details.
You have created a plan with items in various styles. The style of several items is
changed, e.g.the worktop colour, at a later point in time. As a result, the "worktop
colour" entry is entered in the style information of all items. Even items that are not
relevant for this style, e.g. a standard base unit) are marked. All items with a modified
style are displayed in the item list accordingly.
The style, however, is not relevant for most of the items. These items are therefore only
listed by the styles that deviate from the default styles in the report with items
(displayed in italics) for which they are relevant.
3.3.6
Adding windows
After you have drawn the room walls, you can add windows.
Behaviour of windows in the plan
Planned windows can be moved in the plan by drag&drop. To reposition a window, you
can also use the move functions in the Items tab.
Where do you find the window items?
Display the Catalogue Items palette.
Click the Window Selector symbol.
There are various windows or wall openings in the graphic catalogue.
A distinction is made between configurable and standard items. The configurable
window offers easy and flexible handling. Standard windows are defined in the
equipment. Making subsequent changes requires more time and effort.
Which design methods are available for windows?
Walls can be designed with the following methods:
Seite 27
By Drag&Drop: You drag the window item to the desired wall. The window dimensions
are prompted:
If you replace a window with another window (or another item), the variable unit
prompt appears: Since the item to be replaced already has a position and a size,
Seite 28
No dimensions are prompted if you simply confirm the window with OK to add it at
the cursor position. In this case, the values specified in the Catalogue Items
palette are used.
Configurable windows
Configurable windows are windows with variable properties.
Add the configurable .window item.
The shape of the window (number of leaves, with fanlight, bottom window, glazing bars,
etc.) can be freely selected. At the same time, you can plan accessories and the
surrounding area (roller shutter casing and belt, heater niche, curtains, shutters, window
stop, shape and colour of the window, background, etc.). You conveniently edit or change
all properties, dimensions and coordinates in a clearly arranged dialogue field.
Standard windows
Standard windows are defined in your fittings (number of leaves, glazing bars).
All properties of standard windows that you can change are in the Items tab.
In addition to the window dimensions, you can also change the window stop. The
options are in the Properties group. In addition, you can change the window sill for
some items in the Variables.
Seite 29
3.3.7
Adding doors
After you have drawn the room walls, you can add doors.
Behaviour of doors in the plan
Planned doors can be moved in the plan by drag&drop. To reposition a door, you must
also use the move functions in the Items tab.
Where do you find the door items?
Display the Catalogue Items palette.
- Click the Door Selector symbol.
There are various doors or wall openings in the graphic catalogue.
A distinction is made between configurable and standard items. The configurable door
offers easy and flexible handling. Standard doors are defined in the equipment. Making
subsequent changes requires more time and effort.
Which design methods are available for doors?
Walls can be designed with the following methods:
By Drag&Drop: You drag the door item to the desired wall. The door dimensions are
prompted:
Seite 30
If you replace a door with another door (or another item), the variable unit prompt
appears: since the item to be replaced already has a position and a size, the
prompt looks somewhat different:
No dimensions are prompted if you simply confirm the door with OK to add it at the
cursor position. In this case, the values specified in the Catalogue Items palette
are used.
Configurable doors
Configurable doors are doors with variable properties.
Add the configurable item .door.
The shape of the door (door type, colours of the frame, leaf, handle and glass, background,
etc.) can be selected freely. At the same time, you can plan accessories and the surrounding
area (stop, hinge position, closed or open display, colours and handle, background, etc.).
You conveniently edit or change all properties, dimensions and coordinates in a clearly
arranged dialogue field.
Seite 31
3.3.8
Seite 32
3.4
3.4.1
We recommend designing all cabinets first. You can then add worktops, appliances,
accessories and fitting strips, etc.
Which design methods are available in the catalogue items?
Catalogue items can be designed with the following methods:
Seite 33
By Drag&Drop: You drag the catalogue item to the desired wall. You are not generally
asked about the dimensions.
With the (Add)
icon: You can add the item as a main position or an alternative
position using the Add icon. The function is expanded by clicking the arrow on the Add
icon:
Select:
Add Add if the new item is to be added on the desired cursor position.
Add Add As Alternative if the new item is to be added as an alternative to the
selected item.
With the (Link)
icon: You can link a selected item with a sub-position in the
design using the Link icon. Click the arrow on the Link icon to expand the function:
Select:
Link Link (at unit size), if the items are to be added as a simple sub-position
with its own catalogue dimensions.
Link Link (as parent size) if the item is to be added as a simple sub-position
and the dimensions of the main position are to be applied.
With the (Replace)
icon: You can replace one or more selected items with a new
item in the design using the Replace icon. The items selected in the design are
deleted. The new item is set at the starting point of the first item in the selection. Here,
the starting point depends on the design direction. The function is enabled if at least
one item has been selected in the design.
With the (Single Tool)
icon: You can add one or more items between two clicks.
In the Catalogue Items palette, select the item and click the Single Tool icon.
You define the starting point of the first item and the ending point of the last item
with two clicks. The maximum number of items that completely fit between the two
clicks are added.
Seite 34
Mark the starting and ending point of a worktop. The width of the worktop is
determined by the clicked points. The width is preset in the palette or taken from
the catalogue.
3.4.2
4.
5.
6.
7.
8.
9.
symbol.
Seite 35
3.4.3
Moving elements
You can move elements in the plan. The functions are in the Items tab in the
Movement group:
If the cursor was positioned on an item, it is linked to the element. When moving and
rotating elements, the cursor of the function along with the element moves.
Movement Mode
There are several movement types. A distinction is made between two-dimensional
and three-dimensional movement. The function of the arrows changes depending on
the selected movement mode.
To change the movement mode, expand the Movement Mode function in the
Movement group and select the desired entry:
Observe the quick info on the movement function in the menu ribbon. Each
combination of the movement mode and arrow is described in detail.
Absolute Mode
- Absolute Mode (2D) is activated. With Absolute Mode, the selected item is moved
based on the Plan view or Elevation view.
Use the arrows for the following functions
With the grey arrows, the selected item is moved up or down by the absolute entered
value depending on the selected view. In the Plan view, the selected item moves
toward the top wall or lower wall and in the Elevation view, toward to the ceiling or floor.
With the green arrows, you move the selection in the view in four primary directions
left, right, up or down. The movement is always performed based on the view.
Relative Mode
- Relative Mode (3D) is activated. With Relative Mode, the selection is moved based
on the object.
Use the arrows for the following functions
Seite 36
With the grey arrows, you move the selection toward the ceiling or floor.
With the green arrows, you move the selection relatively in the four primary directions
left and right, backward and forward.
How do you move the elements in the plan?
First select the elements that are to be moved, for example, with the activation frame. If
you click an arrow, a prompt opens:
A value is suggested which you can overwrite. The suggested value is determined from
the distance of the selection to the next meaningful position (for example, the next
corner of the room) in the selected direction. If you confirm with OK, the selection is
repositioned.
With these methods, you can move all elements in the planning area: items from
manufacturer and accessory catalogues as well as walls, windows and doors.
Elements that were not graphically designed, such as commercial items, that are linked
with another element cannot be moved.
Items from manufacturer and accessory catalogues can also be moved via a drag-anddrop operation. This method does not work with room elements. They must be moved
with the menu ribbon functions.
Fixed elements
You can fix elements. If an element has been fixed, you cannot accidentally move it
with the mouse. The position can only be changed using the menu ribbon functions. In
the Items tab in the Movement group, click the Lock Item
symbol. If a selected item
is fixed, the symbol is highlighted in colour:
Seite 37
3.4.4
Manual annotations
The standard functions can be called up using the Windows keyboard shortcuts:
STRG + X Cut
STRG + D Duplicate
STRG + V Paste
STRG + C Copy
Clipboard
The Clipboard group is located in the Home tab. The clipboard cache is empty when
the program starts. It always only contains the most recently copied or cut out
selection.
Deleting or cutting?
Select the desired element and press the DELETE key. The selection is deleted from
the plan without another prompt. The clipboard is empty.
If you would like to delete the selection and paste it again at another location in the
plan, use the Cut function. When cutting, the selection is deleted from the plan and is
available in the clipboard.
Which plan data can you delete?
All elements that were pasted in the planning area. This includes catalogue items,
walls, virtual walls, doors, windows, sloped ceilings, niches and installations.
Copying and duplicating
You can copy a selection in the plan. The clipboard content can be placed at another
location in the planning area.
If you would like to duplicate a selection, click Duplicate in the Home tab. The
selection is copied in one step and pasted at the cursor position.
Seite 38
Paste
The Paste function is only enabled if the data is saved in the clipboard.
Place the cursor at the location where the selection in the clipboard is to be pasted and
use the Paste function. After pasting, the clipboard content is also available. This way,
you can paste data several times.
3.4.5
Rotating elements
You can move elements in the plan. The functions are in the Items tab in the
Movement group:
If the cursor was positioned on an item, it is linked to the element. When moving and
rotating elements, the cursor of the function along with the element moves.
What can you rotate?
All elements in the plan can be rotated with the symbols in the menu ribbon. The
selection may consist of a single element or several elements. Illogical rotations, for
example, rotating windows out of a wall and overlaps in the result are reported.
Rotation type
You can rotate elements around the X, Y or Z-axis:
A prompt opens in every case. You determine the rotation angle and can also
select whether you would like to Rotate About Centre, Rotate About Origin or Rotate
About Cursor:
If Rotate About Centre is activated, the selection is rotated in the desired angle
around its own centre. If several items are selected, the centre of an imaginary
Seite 39
If Rotate About Origin is activated, the selection in the desired angle is rotated
around the left rear corner of the item.
If Rotate About Cursor is activated, the selection in the desired angle is rotated
around the cursor.
Rotate about the X axis
- (Rotate about X Axis) With this symbol, you rotate the selection around the X-axis.
Imagine that you are standing in front of a cabinet. A rotation around the X-axis rotates
the door toward the ceiling if a positive value is entered and toward the floor if a
negative value is entered.
Rotate about the Y axis
- (Rotate about Y Axis) With this symbol, you rotate the selection around the Y-axis.
Imagine that you are standing in front of a cabinet. A rotation around the Y-axis rotates
the left cabinet side toward the ceiling if a positive value is entered and rotates the right
cabinet side toward the ceiling if a negative value is entered.
Rotate about the Z axis
- (Rotate about Z Axis) With this symbol, you rotate the selection around the Z-axis.
Imagine that you are standing in front of a cabinet. A rotation around the Z-axis rotates
the left cabinet side if a positive value is entered and rotates the right cabinet side if a
negative value is entered.
Freely rotate
- (Freely Rotate) With this symbol, you can freely rotate the selection at any angle
around its own centre. When freely rotating items, you control the angle and direction
of the rotation using the mouse directly in the planning area.
Seite 40
3.5
3.5.1
Auto Features
With the Auto Features, you create worktops, midi worktops, ceiling fillers, cornices
and pelmets, side panels and plinths in one step:
Seite 41
Seite 42
If you create worktops or midi worktops, but do not edit them, the items are not
calculated.
What happens if you reopen the Auto Features?
If an existing planning element that was created with the Auto Features is changed,
you can reopen the Auto Features. Observe the following:
Activate Enabled only for the Auto Features that are to be newly created or
replaced.
Deactivate Enabled for the Auto Features that are not to be created or for those to
be deleted.
With worktops and midi worktops, you must also activate Edit Worktops so that
existing items are deleted.
You have created cornices and worktops. You would like to keep the cornices and
change the worktop.
Activate Enabled for the two Auto Features. Set up the AutoCornice with the
original settings again. Change the settings for AutoWorktop or create the worktop
with the modified cuts, shapes, etc. using the wizard. Both elements are
overwritten.
Seite 43
You have created cornices and worktops. You would like to change the cornices
and delete the worktop.
Activate Enabled for AutoCornice and reset the settings. Deactivate Enabled for
AutoWorktop.
You can reset all the Auto Features with the Undo
symbol. All items created
with the Auto Features are removed.
If you also edited the worktops and midi worktops with the wizard directly thereafter,
you can mark all entries up to and including the "Auto Features" in the list of the
features to be reset and reset items and editing operations in one step:
If you only would like to remove individual elements, it is easy to do in the Item List
view. Select the items to be deleted. Press the DELETE key.
The easiest way is to select all worktops in the Plan view by selecting the layer. To
do this, in the Home tab, click Select Select Items by Layer Name of the
Catalogue...worktops and then press the DELETE key.
You can reopen the Auto Features (see above) to delete existing items.
If you would like to protect planned elements from being overwritten, you can fix them.
Seite 44
3.5.2
Worktops (options)
The AutoWorktop function calculates and positions worktops in the plan. The program
only adds the worktops on the corresponding cabinets.
Seite 45
3.5.3
Seite 46
With the Optimise function in the Home tab, you can subsequently optimise the layout
of ready-made goods:
3.5.4
Seite 47
item list always equals the number of panel sections available in the plan. With each
panel, a scrap piece remains, which is not used.
With the Optimise function in the Home tab, you can subsequently optimise the layout
of ready-made goods:
Plinth prices
The Plinth Linked Units function activates the prices saved for editing plinths.
Changing plinth heights
If you subsequently change the plinth height via the height table information, only the
plinth height is changed. Cabinets and base units that are on the plinth are not
automatically moved up or down. You can move the plinth heights of all respective
cabinets to a new plinth height in one step. To do this, in the Home tab, click the Plinth
Height symbol:
After adjusting the plinth height, generate the AutoPlinth function again using the Auto
Features.
Overall option definitions for plans
Set up the Auto Features via the tab File Options tab Auto Features.
You can preset the Enabled check box for AutoPlinth.
There are no other overall plinth options for plans.
The Options of AutoPlinth can be changed for editing with each plan.
Seite 48
3.5.5
Seite 49
Among other things, the number of possible functions also depends on whether the
chargeable modules that enable these views have been installed.
Why do I need different views?
The graphic design is carried out in the Plan view and the Elevation view. In the Item
List, you can enter commercial items.
You print out the plan data in the different order statuses using the forms.
The Perspective view is particularly suitable for presenting the graphic design.
Which views are available?
The possible plan views include:
The Item List lists all the planned items. You determine which items (graphic
elements, room elements, only furnishings, etc.) and which information
(dimensions, prices, descriptions, etc.) are displayed for this.
The Plan displays the design's wall layout in the Plan view. Most of the design work
is performed in the Plan view.
The Elevation Views display the front view of each wall in the room. Crosssectional room views are also possible.
The Perspective provides a three-dimensional view of the design from any height,
view point and view angle.
The Reports display the design in the desired form. This is how you display the
information as an offer, order confirmation, etc.
The Multi-View simultaneously displays the design in several views that you can
subsequently print on a sheet of paper.
The views are displayed in the planning area. All important functions for the views are
displayed clearly in the View tab. There are additional functions available in the context
menu.
How do I open the views?
All symbols for opening the views are located in the View tab in the Design View
group:
Seite 50
If you add the symbols for opening the views in the toolbar for quick access, you can
very quickly toggle between the views:
If you prefer working with the keyboard, you can open the views using the following
shortcuts. Press:
CTRL + 2 to display the Item List.
CTRL + 3 to display the Plan View.
CTRL + 4 to display the Elevation View.
CTRL + 5 to display the Perspective View.
CTRL + 6 to display the Report View.
CTRL + 7 to display the Multi-View.
CTRL + 0 to display the Customer Details.
How do I control views?
In the View tab, you will find the functions that allow you to control the displayed view.
The available functions depend on the view in the current Design window:
You select the view and the direct view settings.
You change the display, brightness and contrast for the view on the screen and
print the views.
You select which elements are to be displayed and hidden in the planning area.
You select the functions that you would like to use to support the planning process.
You use functions to navigate and control the view.
You enlarge or minimise the plan or planning section.
Can you display the plan in several windows?
Yes. You can display the open plan in several windows. A distinction is made between
Design windows and Presentation windows.
Seite 51
4.1
Plan
You display a top view of the wall layout in the Plan view.
Which tasks do you complete in the Plan view?
A large part of the planning work is carried out in the Plan view, for example, planning
the wall layout and positioning cabinets.
Since the items are allocated to their height tables, you can conveniently add all items
in the Plan view without observing the vertical alignment. If, for example, you add a wall
unit in the Plan view, it is automatically inserted at the correct height.
How do you switch to the Plan view?
symbol.
the Plan
symbol and select Named Views Name of the View.
Save the Plan view as separate views
You save the Plan view with the current settings as a separate view. Click the arrow
behind the
symbol and select the New Named View entry. Or click in the view and
select the context command Save Screen.
How can you change how the plan is displayed in the Plan view?
You can
display selected layers,
change the plan scale,
change the display, brightness and contrast and
zoom in on planning sections.
Which elements/information is displayed in the Plan view?
In the Plan view, you can
display a grid as a planning tool,
display an imported Plan view (from a CAD program),
display the Grain Direction, Worktop Joint and Worktop Availability symbols,
Seite 52
4.1.1
Seite 53
Worktop Availability
With the Worktop Availability function, you control the display of symbols that indicate
the availability of the worktops in the Plan view. If you activate the function, the
following symbols are displayed:
4.1.2
Seite 54
4.1.3
Zoom tools
The zoom tools are available in the View tab. If the tool is activated, it is highlighted in
colour:
4.1.4
Click the Other entry if you would like to enter an individual value. The 1: field is
enabled and you can overwrite the value currently displayed.
Seite 55
4.2
Elevation view
You display the front view of walls in the Elevation view. The Elevation view can be
used for individual or several walls in the room as well as for sloped walls and wall
indents.
Which tasks do you perform in the Elevation view?
In the Elevation view, for example, you can
add, move and delete items,
add installation symbols,
edit niche walls with the Wizard and
plan tiled sections and wall panels.
How do you switch to the Elevation view?
symbol.
the
symbol and select Named Views Name of the View.
If there are automatically created Elevation views for the plan, they are listed in the
gallery. If you would like to display an automatically generated Elevation view, click
the arrow after the
Seite 56
If a wall is selected in the plan, you can directly switch to this wall in the Elevation
view. If you would like to display the selected generated Elevation view, click the
arrow after the
The Elevation (Selected Wall) function is only enabled in the menu ribbon if a wall
was selected in the plan. It is not available if several walls were activated.
In the context menu, open the view by right-clicking the desired wall and selecting
the context command Elevation (Selected Wall) Current Selection or the
context command Elevation (Selected Wall) Name of the Wall if several walls
are in the clicking area. The context command is available regardless of whether a
wall was previously selected.
Saving the Elevation view as separate views
You save the Elevation view with the current settings as a separate view. Click the
arrow after the
symbol and select the New Named View entry.
If there is a complicated wall layout with many walls, you can quickly generate
automatic Elevation views of all walls for the current plan. Click the arrow after the
symbol and select the Auto-Generate Named Views entry.
If you right-click in the view and select the context command Save Screen, you save
the displayed planning area as a graphic in JPG or BMP format.
How can you change how the plan is displayed in the Elevation view?
You can change the display using the following functions. You can:
display selected layers,
hide parts in the foreground of the plan with the clipping plane,
hide parts in the background of the plan with filter behind the primary wall and
control whether dimensions or annotations are only to be displayed for the selected
wall.
change the plan scale,
change the display, brightness and contrast and
zoom in on planning sections and
display a grid as a planning tool.
Which additional elements/information would you like to display in the Elevation
view?
In the Elevation View, you can
display the info bar below the planning area.
What is to be considered when printing the Elevation view?
In the Elevation View, you can:
activate the Info Block for the printout,
activate the item list or installation symbol legend for the printout and
Seite 57
4.2.1
Seite 58
If you would like to use the individual views, you have to manually create additional
views for these walls, since the provided default views or the saved views that you
created in other plans do not work in this case:
The generation of Elevation views is suppressed if a wall is smaller than the minimum
dimension. The minimum wall dimension is 150 mm. This way, for example, no
individual Elevation views can be generated for side walls of small niches. This
dimension can be customised for the company in PPPrefs.INI.
Seite 59
Seite 60
4.2.2
Selecting walls
You can display one or more walls in the Elevation view.
Which wall would you like to display in the Elevation view?
If you switch into the Elevation view in a plan for the first time using the
symbol, the
primary wall is displayed. By default, the top horizontal wall is the primary wall in the
plan. The wall is displayed as an individual view.
With complicated wall layouts of angled rooms, the easiest way to open the desired
Elevation view is with the Elevation (Selected Wall) function.
If you have already opened the Elevation view, in the View tab, you can switch the
Elevation view with the arrows in the Navigate group. The arrow that appears on the
displayed wall remains active in the menu ribbon. This way, you maintain an overview
on which planning area you are currently editing in the Elevation view:
In the Elevation view, you can only select the walls of the four primary directions (from
the view of the square plan) using the arrows, even if there is a wall layout with more
than four walls. On the right and left of the selected room view, you then see the
adjacent walls in their longitudinal section in the plan.
If, for example, you click the arrow on the left, the wall in the Elevation view is
displayed that runs vertically in the plan on the left side of the plan area:
Seite 61
The palette displays a preview of the wall layout and functions for selecting one or
more walls:
To see an Elevation view of a specific wall, click the desired wall in the preview.
The program now displays this wall in the individual Elevation view.
If you would like to display several walls, select a primary or one or more secondary
walls, click the desired walls in the preview. We highly recommend this function for
editing wall indents, for example, how niches are to be dimensioned.
Selecting primary and secondary walls
You can define a primary and several secondary walls for the Elevation wall. If they
along with the side panel are all in one layer, the walls can be displayed simultaneously
in the Elevation view:
Define Primary Wall: In the preview, left-click a wall to define it as the primary wall.
Select the wall that you would like to subsequently view closer or edit in the
Elevation view. The location from where you are viewing the wall automatically
adjusts according to the primary wall and is marked by a small circle.
By default, the primary wall is displayed in green in the preview.
Define Secondary Wall: In the preview, right-click a wall to define it as the
secondary wall. You can also activate several walls as secondary walls. Select the
wall that you would like to see as the plan along with the primary wall in the
Elevation view as the secondary wall.
Too many secondary walls results in a confusing view.
By default, a secondary wall is displayed in blue in the plan selection.
Seite 62
Palette functions
While the Navigate View palette is open, you can continue working in the plan without
closing the palette.
Use the palette functions:
Drag the palette to any location in the window.
Display the anchored or floating palette.
Minimise or maximise the palette anchored on the window edge.
4.2.3
With the Clipping Plane, you can hide parts in the plan that are located in the
foreground between the observer and the selected wall.
The clipping plane is moved closer to the observer by moving the control to the left.
This displays an island unit located between the observer and the selected Elevation
Seite 63
view:
The clipping plane is moved away from the observer by moving the control to the right.
The clipping plane is now behind the island unit and in front of the selected Elevation
view. The island unit is not displayed:
Seite 64
With the Elevation view with filters, the wall behind it is not displayed:
Seite 65
4.3
Perspective
The Perspective provides a three-dimensional display of the plan. The perspective of
the observer and observed planning section can be selected freely
:
Which tasks do you perform in the Perspective view?
The Perspective view is primarily used for display purposes.
There are also several planning functions available in the Perspective view. For
example, you can insert, select, delete, rotate or move items. In particular, precisely
positioning items, however, is difficult.
In the Perspective view in the transparent display, you can select hidden surfaces of
catalogue items (for example, side and rear walls of cabinets) for editing surfaces.
If you work with the chargeable graphic package add-on module, you can export the
perspectives to QuickTime VR.
When using the QuickTime VR function, you should make sure that the observer is
inside the room, because otherwise he looks at the outer wall.
How do you switch to the Perspective view?
Seite 66
symbol.
after the
symbol and select Named Views Name of the View.
Saving the Perspective view as separate views
Save the Perspective view with the current settings as a separate view. Click the arrow
after the
symbol and select the New Named View entry.
How can you change how the plan is displayed in the Perspective view?
In the Perspective View, you can
display selected layers,
change the display, brightness and contrast and
hide elements that block a free view of the planning parts behind them.
Which additional elements/information would you like to display in the
Perspective view?
In the Perspective View, you can
display the info bar below the planning area.
What should be considered when printing the Perspective view?
In the Perspective View, you can
activate the Info Block for the printout.
What is displayed in the Perspective view?
There are several methods for creating a new perspective:
Active Perspective: You use the Active Perspective to dynamically adjust the
displayed planning section to the selected items.
Navigation mode: The navigation tools are available in the View tab of the
Perspective.
Change View Point: You use Change View Point function in the View tab of the
Perspective and change the planning section of the preview.
You can open the Default and the Bird's Eye.
Named Views: You open the Named Views.
Seite 67
4.3.1
Active Perspective
When you work with the Active Perspective function, the planning section that you are
currently working on is always displayed in the perspective. The perspective
dynamically adjusts to the items in the selection. The Active Perspective provides you
with optimum support if you are working with several windows or two screens.
How does the Active Perspective work?
The Active Perspective is the fastest way to adjust the desired section in the
Perspective view. The planning section displayed in the perspective is adjusted with
each selection. The setting for the location of the viewer, the viewing direction and the
field of vision is calculated from all the activated items. The orientation of the front
surfaces of the selected items in relation to the viewer is the decisive factor for the
calculation.
If you click an item in the perspective, it is selected. At the same time, the location,
viewing direction and the viewed section adjust in the perspective so that the
viewer has an ideal view of all items.
If you opened the plan in several windows, for example, in the Plan and the
Perspective view, the perspective is also adjusted if you select items in the plan.
How do you activate the Active Perspective function?
The Active Perspective is controlled separately for the Design and the Presentation
window.
In the Design window, activate the function via the menu ribbon in the perspective.
Click the arrow behind the Perspective
symbol and select the Active Perspective
entry. If you are now working in this view or in a second Design window and select
items, the Perspective view always adjusts the selection.
For the Presentation window, you can access the function via the context menu of the
Design window or the Presentation window:
Right-click in the Design Window and select the context command Additional
View(s) Name of the Presentation Window Active Perspective.
Right-click in the Presentation window and select the context command Active
Perspective.
The control function via the Additional View(s) function allows you to control the
Presentation window if it is displayed on a second screen that you cannot view. The
customer sits across from you and only sees the Presentation window. While the
customer follows the planning process on the second screen as the plan develops, you
can work in other views and also process sensitive commercial data.
Seite 68
In the Plan view, activate an item, for example, the corner unit between the top and
right wall:
In the Plan view, select another item, for example, to the far left on the top wall:
In the Plan view, do not select two items that are next to each other, for example, to the
far left and right on the top wall:
Which settings would you like to work with this and other designs?
You can set up the Active Perspective in Options (via tab File Options tab View
Settings). Here, under Perspective Defaults for the Design window and under
Additional Views for the Presentation window, you control whether the Active
Perspective is to be activated by default for the corresponding windows.
Seite 69
4.3.2
In the default perspective, viewing height and eye level are 1250 mm and the view
angle is 70. The clipping plane runs through the perspective of the observer, that is no
items are hidden between the observer and the focus point.
Each time you click the Default button, you return to these preset default perspective
again.
Opening the Bird's Eye perspective
Click the arrow after the Perspective
symbol and select the Bird's Eye entry.
The Bird's Eye perspective displays the plan perspective from above. Here, the
observer is above the centre of the plan. The viewing direction is directed towards the
centre of the floor. Unlike the plan, the Bird's Eye perspective displays all threedimensional aspects of the plan:
Seite 70
4.3.3
- Orbit Movement Mode - if you activate this symbol, you can rotate the
perspective of the observer around the viewed point in the selected direction by
dragging the mouse in any direction.
- Zoom Movement Mode - if you activate this symbol, you zoom the displayed area
of the plan in and out by dragging the mouse to the right or left.
- Look Around Movement Mode - if you activate this symbol, you can rotate the
perspective of the observer in the selected direction by moving the mouse in any
direction.
- Walk Movement Mode - if you activate this symbol, you can change the
perspective of the observer. By dragging the mouse
up, the observer moves to the front and the observed point remains the same;
down, the observer moves to the rear and the observed point remains the same;
to the right, the observer rotates to the right, the observed point changes and the
position of the observer remains the same;
to the left, the observer rotates to the left, the observed point changes and the
position of the observer remains the same.
- Drag Movement Mode - if you activate this symbol, you can change the
perspective of the observer. By dragging the mouse
to the right, the perspective of the observer and the observed point move to the
right;
to the left, the perspective of the observer and the observed point move to the left;
up, the perspective of the observer and the observed point move up;
down, the perspective of the observer and the observed point move down.
Combining the vertical and horizontal mouse movement, creates combined movement
patterns accordingly.
During the movement process, the program switches into OpenGL mode. Once the
navigation is ended, the previously selected colour setting is restarted. That only works,
however, if the PC has hardware-supported OpenGL acceleration.
Seite 71
4.3.4
Where do you find the functions for hiding walls and items?
The functions for hiding walls and items are in the View tab in the Design View group:
Figure: walls are automatically hidden in the Perspective with the "Display Items", "Semi-Transparent
Items" and "Hide Items" settings
Seite 72
Catalogues
5.1
Catalogue types
There are various catalogue types that are used in a variety of ways in the program.
Which catalogues do you work with?
Most catalogues are Principal Catalogues. They contain manufacturer-specific
information on items, prices, styles, etc. You normally use at least one main catalogue
in a plan.
An Appliance Catalogue contains information on appliances, for example stoves,
refrigerators, hobs, dishwashers, sinks, etc. The catalogue does not contain
information on furnishings. Only the accessories that are not offered by furniture
manufacturers are included here. An accessory catalogue contains the manufacturer's
exact order codes and descriptions.
Items that have been entered from the standard accessory catalogue are only listed
commercially in the plan, since no graphics are saved in the accessory catalogue. If
graphics are created for accessory items, they are in the graphical units catalogue. If
you would like to enter an electrical stove commercially as well as graphically, the
stove must be entered twice, once in the accessory catalogue and once in the
graphical units catalogue.
Complete SHD catalogues are also created for some manufacturers of accessories,
which you can use for commercial and graphic purposes.
Graphical catalogues contain decoration elements and accessories with which you
can also design the plan. This includes, for example, indoor plants, tables, chairs,
appliances, etc. Graphical units catalogues normally do not contain any prices so that
graphic items can be added to the plan without changing the price.
The graphic elements are not listed in a form.
In the Item List (via tab View Item List Item Type Display
Graphic Items),
you can display graphic items to replace, delete or add them if necessary.
In the Room Design catalogue contains all items with which you can create the tile
plan. The catalogue also contains materials for floor and ceiling coverings.
The corner bench plan catalogue contains items that offer a complete corner bench
and round bench solutions.
The Installations Catalogue contains all the installation symbols that you can
manually plan.
Base Files are used as libraries for drawings. Other catalogues (main catalogues and
accessory catalogues) can access the base file for the graphic display. For example,
the base file contains all drawings that all catalogues share. This reduces the
necessary storage space. Upon request, each catalogue can replace the display from
the base file.
Seite 73
If you select one of the first three options, only the respective selected catalogue type
is displayed in the list. If you select All, all available catalogues except for the base file
are displayed. You display your catalogue groups with the Groups entry.
If the desired catalogue is not listed in any of the categories, it is either already
integrated into the plan (and therefore cannot be added a second time) or it was not yet
installed. Although the catalogue may be available on the hard drive, you have to let
the program know that this catalogue is available before you can use it.
Can you subsequently add a catalogue?
Yes. You can change the catalogue used in the plan via the catalogue info and the
catalogue change functions.
5.2
Seite 74
5.3
If you open the Update Design function, critical data is checked. You can update all
items in the plan according to the latest catalogue version. The Room Validation
Wizard starts, which guides you through the various test steps.
Seite 75
6.1
Seite 76
6.2
Auto Dimension
Set up the Auto Dimension function in the Annotate tab:
not activated:
or activated:
Executing Auto Dimensions
If the Auto Dimension function is not activated in the background, the dimension is first
carried out or updated with the selected settings if you click the Items symbol in the
Annotate tab:
Seite 77
or
Figure: Dimension settings for the Plan view (left) and the Elevation view (right)
An island solution that was planned on a virtual wall can be dimensioned in the
Elevation view. To do this, you must display the virtual wall (cutting line) in the
Elevation view (for example, open the Elevation view (selected wall) via the view
settings or context command).
Seite 78
If you activate Base Units, Wall Units, Fixtures, Wall Angles, Island Units, Ceiling
Fillers, Cornices, Pelmets, Worktops, Worktop Radii, Worktop Angles and/or Tile
Zones, dimension lines are drawn on these design elements.
If you activate Wall Angles or Worktop Angles, the inner wall angle or the angle
for the worktops is dimensioned.
If you activate Worktop Radii, the worktop radii are dimensioned. With very flat
curves (large radii), the radii are displayed in a shortened version in the form of a
lightning bolt.
You can also control the display of right angles via Options (tab File
Dimensioning).
Options
tab
Seite 79
What advanced settings would you like to use to generate the dimensions in the
Plan view?
In the Annotate tab, click the symbol on the lower right on the Dimensions group,
to open the Dimension Options. The following functions are available in the Plan
view:
Add Worktop Dimensions: With the 2 Sides and 4 Sides options, you select
whether the worktops are to be dimensioned on 2 or 4 sides.
If you activate Adjacent to Origin, the dimension is carried out from the point
where the worktop was originally inserted and in which the worktop was first
inserted according to the plan direction.
The Include Max Dims function affects the worktop dimensions for which a cut-out
or curve was created, for example. If you activate Include Max Dims, the entire
length of the worktop is displayed. If this function is deactivated, only the actual
dimensions are displayed.
If you activate Remove Duplicates, duplicate dimensions are removed in the plan.
In Options (via tab File Options tab Dimensioning), you control how the
Dimension Options are to be predefined for this and other designs.
What advanced settings would you like to use to generate the dimensions in the
Elevation view?
In the Annotate tab, click the symbol on the lower right on the Dimensions group,
to open the Dimension Options. The following functions are available in the Elevation
view:
Seite 80
There are no other settings in the standard dimension mode. If you activate the Expert
option, the functions are enabled.
For selected elements (for example, wall units or plinths), you can define whether
the dimension is to be carried out on the upper edge and/or lower edge. If an
element is not to be included in the dimension, deactivate Top and Btm after the
element.
If you activate Many Slices, separate dimension lines are inserted for each expert
dimension setting, for example, for the upper edge of wall units, for the lower edge
of pelmets, etc. If you deactivate the function, all dimensions on a line are displayed
on chain dimensions.
Why are no dimensions displayed?
Even if the Auto Dimension function is activated in the background, no dimensions are
created. There are different reasons for this:
Chain dimensions are only created if a wall has been added in the planning area.
Freely planned elements without a wall or a virtual wall are not dimensions, even if
it involves an item whose dimension type is triggered by the selected elements.
You have activated Dimension Types in the settings, but no Options.
You have activated Options in the settings, but no Dimension Types.
You have activated Dimension Types and Options in the settings, but the plan
does not contain any items with the corresponding Dimension Type.
You have activated the Witness Lines dimension option in settings, but not the
Dimensioning entry. Witness lines are only displayed in combination with witness
lines.
The Plan view is displayed. You have only set up the Auto Dimension function for
the Elevation view.
The Elevation view is displayed. You have only set up the Auto Dimension function
for the Plan view.
Options
In Options (via tab File Options tab Dimensioning), you control how the
dimension settings are to be predefined for this and other designs.
Seite 81
6.3
Dimension lines
Dimension lines display the gap between two points in the plan. Dimension lines have
a starting point and an ending point. You can change how the dimension lines are
displayed.
You can change how the dimension lines are displayed. In the Annotate tab, click the
Seite 82
The selected Rail End Style always applies to all dimension lines regardless of
whether they are in the dimension or the installation dimension and whether the lines
are manually or automatically created.
Once you change the display, individual hidden lines are displayed again, where
necessary. Choose a display type before editing the individual lines.
You can select lines with different ending points for displaying the dimension lines. The
ending points are used for dimension lines as well as starting points:
Displaying additional dimension options
Only the measured value is initially displayed in the dimension line. You can display
additional details in the dimension line. The values are displayed in the dimension line
in the order Order Code Height From Floor Width:
If the Height From Floor dimension option is activated, the height of the items from
the floor, for example, for wall units, is also displayed in the automatic dimensions.
Manual dimensions do not display the Height from Floor.
If the Order Codes dimension option is activated, the order codes of the measured
items are also displayed in the dimension lines. With the installation dimension, the
name of the installation symbols is displayed instead of the order code.
The item's dimension line with the order code 21417 is selected. The height from the
floor is 150 mm and the width is 500 mm.
Seite 83
The values displayed in the dimension line (order code, height from floor and width) are
displayed in the chain dimensions.
When dimensioning very narrow elements (for example, fitting strips) in the Plan view
or for the dimension in the Elevation view, the values or order codes displayed in the
chain dimensions may be so close together that the values overlap.
You can move the value, including the order code in a marked line horizontally and
vertically. To do this, use the functions in the Edit Value area.
Seite 84
Horizontal Offset: Positive values move the dimension value to the right. Negative
values move the dimension value to the left.
Vertical Offset: Positive values move the dimension value up. Negative values
move the dimension value down.
Please note that the values from the chain dimensions are only moved correctly if the
auto dimension is not activated in the background.
Options
You can set up how the dimension line is displayed, how the rail values are aligned and
the gaps between the dimension lines for this and other plans (via the tab File
Options tab Dimensioning).
6.4
Witness Lines
Witness Lines are used to provide a clearer display. By default, the witness lines are
dotted reference lines that display the part of the plan that a dimension line refers to.
Seite 85
You can change the witness line style. In the Annotate tab, click the
Line Style symbol and select the desired shape:
Witness
The selected Witness Line Style always applies to all witness lines regardless
whether they are in the dimension or the installation dimension and whether the lines
are manually or automatically created.
Options
You can set up the witness line style in this and other plans in Options (via tab File
Options tab Dimensioning).
6.5
Guide Rails
Guide Rails are used to align and arrange several dimension lines in the plan. The
guide rails thus ensure more clarity for the display.
Seite 86
Guide rails are created for all selected elements. This does not include wall angles,
worktop radii and worktop angles.
Guide rails are created regardless of whether there is a dimension line. They form
the complete wall width.
If an item is added to the plan for which a guide rail and a dimension line are
created, the item's dimension line covers the guide rail.
Guide rail display in the plan
Unlike dimension lines and witness lines, you cannot adjust guide rails in the plan.
By default, guide rails are displayed as continuous green lines without ending points.
Guide rails visually fill the gap dimensions in chain dimensions, but without displaying
the value.
The guide rail actually runs along the entire chain dimensions and corresponds to the
wall width. If you select a guide rail in the plan, the entire chain dimensions area is
highlighted in red:
If you hold the mouse pressed and drag the dimension line of a base unit out of the
chain dimensions, the area in the chain dimensions is filled with the guide rail:
Seite 87
Instead of a guide rail, you can use the Gap Dimensions dimension type for the auto
dimension. If chain dimensions have a gap, the gap is replaced by a dimension line for
the gap. The guide rail in this case is covered by the entire chain dimensions.
Can you delete the guide rails?
Automatically and manually created guide rails can be individually selected and
deleted. Select the desired guide rail and press the DELETE key.
Why are no guide rails displayed?
Automatically created guide rails are displayed according to the following rules:
Automatically created guide rails in the plan are only displayed parallel to the
planned walls. If you have planned items without a wall or freely planned a virtual
wall in the room, no chain dimensions are created for these items.
By default, vertical guide rails for the Auto Dimension function in the Elevation view
are displayed to the right of the planning area and horizontal guide rails are
displayed below the planning area.
Vertical guide rails for the Auto Installation function in the Elevation view are
displayed to the left of the planning area and horizontal guide rails are displayed
below the planning area. This does not apply to positioning From Right in which
the vertical guide rails are displayed to the right of the planning area.
Options
You can set up the witness line style in this and other plans in Options (via tab File
Options tab Dimensioning).
Seite 88
6.6
Manual dimensioning
You can manually create dimensioning lines and guide rails. There are various tools
available for this in the Annotate tab:
Using tools
If you activate a tool, it is highlighted in colour in the menu ribbon:
The cursor assumes the tool's function. Depending on the selected tool, each drawing
operation consists of one, two or several mouse clicks.
The tool remains activated after the desired line has been created. It is available for
any number of actions:
If you click another tool in the menu ribbon, the tool most recently used is
deactivated and the new tool is activated.
If you click an activated tool in the menu ribbon again, it is deactivated. The cursor
again assumes the function of the simple design arrow, which allows you to select
the elements in the design.
Manual dimensioning in an expanded image section: If, when dimensioning, you do not
see the ending point of the dimension line in the planning area between two mouse
clicks in the expanded image section, click the mouse once and drag it over the
planning area towards where the end of the dimension line is to be positioned with the
second mouse click. The image section rolls towards the mouse. Once the desired
area is displayed, point the mouse in the planning area again and set the ending point
of the line.
Why can't I select a tool?
The tools that can be used depend on the selected view.
The following tools can be used in the plan:
Seite 89
You can also manually create guide rails (marked in yellow) in the wall view if you have
activated the guide rails in the automatic dimensioning settings.
How to delete manually created dimensions?
Manually created dimensions are not overwritten or deleted by the automatic
dimensioning function.
Deactivate all tools for manual dimensioning so that you can use the mouse as a
design arrow. If you now click a manually drawn line, it is selected. Press the DELETE
key.
Dimensioning activated lines
Manual dimensioning lines can be created on lines in the layout and wall view.
- (Dimension Selected Line) Using this tool, you create a manual dimensioning line
on a line in the design. The dimensioning line is created by clicking the line.
Each edge of an element in the design is considered a line here. If you click in the
middle of an element, a diagonal line is marked on the relevant surface. If no element
or line is detected when clicking, the tool does not respond.
Installation symbols are not activated by the tool.
Freely drawing a dimension line from ... to
Manual dimensioning lines between two mouse clicks can be created in the plan and
wall view.
- (Dimension From ... To) With this tool, you create a free dimensioning line located
between two mouse clicks. After the first click, a dotted line hangs between the first
clicking point and the cursor. If you move the mouse, the dotted line is dragged from
the mouse. When you click the mouse the second time, the dimensioning line is
inserted between the two clicking points.
The starting point of a free dimensioning line only snaps at the corners of elements.
Otherwise, you can insert the line anywhere in the planning area.
Dimensioning right angles
A right angle can be manually dimensioned between two mouse clicks in the plan and
wall view.
- (Dimension Right Angles) With this tool, you dimension the X and Y-dimensions
located between any two mouse clicks. After the first click, a dotted line hangs between
the first clicking point and the cursor. If you move the mouse, the dotted line is dragged
from the mouse. When you click the mouse the second time, two dimension lines
positioned at right angles to each other are inserted between the two clicking points. In
the example, the two clicking points are marked in green:
Seite 90
The starting point for dimensioning the right angle only snaps at the corners of
elements. Otherwise, you can insert the line anywhere in the planning area.
Dimensioning the centre of the item and the centre of the installation symbol
The right angle can be manually dimensioned between two mouse clicks from the
centre of an item in the plan and wall view.
- (Dimension Item Centre) With this tool, you dimension the X and Y-dimension
located between two mouse clicks in the centre and the corner point of any item. First
click in the area of an item located in the snapping area of the centre. Then click the
corner of an item. After the first click, a dotted line hangs between the first clicking point
and the cursor. If you move the mouse, the dotted line is dragged from the mouse.
When you click the mouse the second time, two dimension lines positioned at right
angles to each other are inserted between the two clicking points. In the example, the
two clicking points are marked in green:
or
Figure: centre and corner point of the same item (left) or centre and corner point of different items (right)
The right angle can only be manually dimensioned between two mouse clicks from the
centre of an installation symbol in the wall view.
- (Dimension Installation Symbol Centre) with this tool, you dimension the X and Ydimension located between the two mouse clicks from the centre of an installation
symbol to the corner of an item. First click in the area of an installation symbol located
in the snapping area of the centre. Then click the corner of an item. After the first click,
a dotted line hangs between the first clicking point and the cursor. If you move the
mouse, the dotted line is dragged from the mouse. When you click the mouse the
second time, two dimension lines positioned at right angles to each other are inserted
between the two clicking points. In the example, the two clicking points are marked in
green:
Seite 91
To create chain dimensions using multipoints, at least two clicking points must be
detected in the planning area before you can complete the wall dimensioning.
- (Dimension Horizontal Multipoint) With this tool, you can freely draw several
linked, horizontal dimensioning lines. Click on all points in the design that you would
like to display in horizontal chain dimensions. The order is not important. You end the
dimensioning operation by double-clicking or by clicking one of the walls on the right or
left. The chain dimensions are created along the entire wall width.
Vertical jumps made when clicking are ignored. Only the gap on the X-axis is entered
as a dimensioning line. The entire dimensioning operation is calculated from wall to
wall. If the walls on the right and left are not clicked, the gaps from the next point to the
right or left wall are completed as a dimensioning line.
- (Dimension Vertical Multipoint) With this tool, you can freely draw several linked,
vertical dimensioning lines. Click on all points in the design that you would like to
display in horizontal chain dimensions. The order is not important. You end the
dimensioning operation by double-clicking or by clicking the ceiling or floor on the right
or left. The chain dimensions are created along the entire wall height.
Horizontal jumps made when clicking are ignored. Only the gap on the Y-axis is
entered as a dimensioning line. The entire dimensioning operation is calculated from
floor to ceiling. If neither the floor nor ceiling is clicked, the gaps from the next point to
the ceiling or floor are completed as a dimensioning line.
Drawing guide rails on an activated line
Manual guide rails can be created on lines in the plan and wall view. To enable the
function in the wall view, you must activate the Guide Rails dimensioning option in the
automatic dimensioning settings.
- (Dimension Selected Line) Using this tool, you create a manual dimensioning line
on a line in the design. The dimensioning line is created by clicking the line.
Each edge of an element in the design is considered a line here. If you click the centre
of an element, a diagonal line is drawn on the relevant surface. If no element or line is
detected when clicking, the tool does not respond.
Installation symbols are not activated by the tool.
Freely Guide Rails from ... to
Guide rails can be manually dimensioned between two mouse clicks in the plan and
wall view. To enable the function in the wall view, you must activate the Guide Rails
dimensioning option in the automatic dimensioning settings.
- (Guide Rail From ... To) With this tool, you create a free guide rail located
between two mouse clicks. After the first click, a dotted line hangs between the first
clicking point and the cursor. If you move the mouse, the dotted line is dragged from
the mouse. When you click the mouse the second time, the dimensioning line is
inserted between the two clicking points.
The free guide rail does not snap on any element. You can insert the rail anywhere in
the planning area.
Seite 92
6.7
Options: Dimensioning
You set the options for dimensioning and installation dimensions via tab File
Options tab Dimensioning.
Which settings do you edit in the Dimensioning area?
Set the following settings with which the dimension is to be predefined in new plans:
Select the (Auto) Dimensioning Mode and select which elements are to be
dimensioned.
Set the font settings for the dimension.
Determine how the chain dimensions are to be displayed.
Select the wall angle dimension.
Set the dimension of worktops.
Select the dimension line and witness line display.
Set the general dimensions settings.
Seite 93
If you activate Many Slices, separate dimension lines are inserted for each of the
expert dimension settings selected in the options, for example, for the upper edge
of wall units, for the lower edge of pelmets, etc. If the function is not activated, all
activated dimensions on a line are displayed on chain dimensions.
Font settings for the dimension
Select the Family and Size that the measured values are to display.
To change the font style, activate Italic, Bold or Underline.
Dimension Rail Settings
Control the gap of the dimension lines:
Enter which gap the first dimension line is to have to the wall in the Initial Gap field
separately for the Plan and Elevation view.
Enter which gap is to be between the dimension lines in the Subsequent Gaps
field separately for the Plan and Elevation view.
Set the following settings under Dimension Value Alignment:
If you activate Align Value with Dimension Rail in Plan View or Align Value with
Dimension Rail in Elevation View, the dimension values are integrated into the
corresponding chain dimensions. In vertical dimension lines, the values and the
code numbers, where applicable, are in the line and not perpendicular to the line.
There are no overlaps with the next dimension line on the right or left:
Seite 94
Seite 95
6.8
Seite 96
With the Default Line Placement function, you specify how the dimension of the
installation dimension is to be created for all plans:
None: No dimensions are added or existing automatic dimensions are deleted.
As added: The dimension is displayed on the left or right for each installation
element depending on whether the element was added with a gap to the left or
right.
From nearest corner: The program automatically decides whether the part is
closer to the right or left wall corner. The distance to the next wall corner is entered
as the dimension.
From left: All dimensions are measured from the left corner.
From right: All dimensions are measured from the right corner.
Vertical installation dimension
With the Arrange Rails By Installation Symbol Position function, you control that the
vertical dimension rails of the automatic installation dimension are sorted in ascending
order from the inside to the outside with increasing length. This sorting process is the
standard.
6.9
Auto Annotate
Set up the Auto Annotate function in the Annotate tab:
Annotation elements that appear directly in the dimension line are created using the
Auto Annotate settings. This includes the measured values, the order codes and the
height from floor.
How do you activate the Auto Annotate function in the background?
In the Annotate tab, click the Auto symbol to activate or deactivate the Auto Annotate
function in the background. If the Auto Annotate is activated in the background, the
symbol in the menu ribbon is permanently highlighted in colour:
Not activated:
or activated:
Executing automatic annotations
If the Auto Annotate function is not activated in the background, the dimension with the
selected settings is only executed or updated if you click the Items symbol in the
Annotate tab:
Seite 97
If you have moved the automatic annotation, a prompt is displayed asking whether
the automatic annotation is to be repositioned.
Separate settings for the Plan and Elevation view
The automatic annotation is set up based on the selected view. For example, you can
use different annotations in the Plan view than the Elevation view.
In the Plan view, you can also select a number as an annotation type.
In the View tab of the Elevation view, you can hide the annotations of the adjacent
walls. To do this, click the Options
symbol and select the Annotate Selected
Wall Only entry.
Which kinds of annotation can you create?
Using the Annotate by function, you control how the installation dimensions are to be
positioned or arranged.
or
Figure: annotation types for the Plan view (left) and the Elevation view (right)
Seite 98
Type: This setting sorts the items by type, for example, base unit, wall unit, etc. If
you select a sort setting that contains this setting, base units are arranged before
the wall units, which are in turn arranged before shaped parts, pelmets and
worktops, etc. The exact sorting order depends on the catalogue requirements.
Manufacturer: This setting sorts the items according to the manufacturer
catalogues from which they originate. If you select a sorting setting that contains
this setting, for example, all cabinets of the main suppliers come before the
electrical appliances from the electrical equipment catalogue.
Position: This setting sorts the items according to their position in the room. If you
select a sorting setting that contains this setting, all items are continuously
numbered clockwise from the starting point. To define the starting point, click the
Annotate By symbol again and select the entry Numeric
Set Start. Then click
the desired starting point in the Plan view.
The corresponding sorting setting is configured by combining the sorting criteria from
Position, Type and Manufacturer in different combinations. The sorting criteria are
applied from left to right:
The Manufacturer/Type/Position sorting setting initially numbers all items according
to the manufacturers. Within the manufacturers, the items are sorted by their type and
then they are sorted by their position in the room.
Options
In Options (via tab File Options tab Annotation), you control whether the
Annotation function is to be activated for the Plan view and/or the Elevation view and
the settings with which they are to be preset for this and other plans.
6.10
Options: Annotate
You set the options for the annotation via tab File
Options tab Annotation.
Which settings do you edit in the Annotation area?
You determine whether you automatically create an annotation in the Plan and/or
Elevation view during the planning process and with which settings they are to be created:
Select the type of annotation.
Set up the font setting for standard items, manual annotation and modified items.
Seite 99
Seite 100
Seite 101
7.1
Graphic Items
Use the graphic items to add things to the plan that are already located at the
customer's location. Or you make a vibrant room with decorations from the plan.
What are graphic items?
Graphic items include all items from the planning that are not commercially entered. In
addition to room elements, this includes in particular all elements that are used to
complete or decorate the view of your plan.
Graphic items have no commercial value. They are therefore normally not listed in the
form.
If you would like to enter a graphic item with a commercial value as an additional
service (for example, for setting an additional power outlet behind a working area), you
add the item as a special part.
Graphic items without commercial value should not be planned via the Non-Standard
function. Special parts are listed in the form (offer, offer confirmation, etc.).
What graphical unit catalogues are available?
The program uses several catalogues with graphic items.
The Graphical Units catalogue contains summarised graphics, such as plates,
images, curtains or similar, that you can add as a decoration in the kitchen planning.
Some of these elements are summarised as a package. You plan packages with the
Decoration function.
The graphical units catalogue contains accessory items that are not to be planned from
manufacturer catalogues, because they may already exist at the customer's location.
Graphic accessory items can complete the planned room without any commercial
value.
Graphic accessory items are required for two use cases:
To complete the view of your plan, you can only plan the graphics of this equipment
via the graphical units catalogue. For example, electrical equipment and kitchen
range hoods already exist at the customer's location. Their prices are therefore not
to be taken into consideration. Plan the accessory items from the graphical units
catalogue without any prices. The graphic design is complete. Only items that are
relevant in terms of prices are included in the forms.
Some of the manufacturer accessory catalogues do not contain any graphics, but
only prices. Purely commercial planning items can also be graphically
supplemented with the graphic accessory items.
The graphical units catalogue contain lighting items. Each plan is automatically
provided with standard lighting. You can set manual lighting effects with the items from
the graphical units catalogue.
Seite 102
The Graphic Corner Bench Items catalogue contains all items with which you can
plan the corner and round benches.
If you are also working with the Graphic Bath Items catalogue, you can add graphic
bath elements to the plan.
Installation symbols are also part of the graphic items. They are listed in the
Installations catalogue. If you plan installations, the program automatically switches to
the installations catalogue (referred to as installation catalogue below).
If you edit tiles, floor surfaces, wall surfaces or other surfaces, the program accesses
the Room Design catalogue.
How do you plan graphic items?
When the program starts, all graphical units catalogues are automatically loaded. You
only have to select the manufacturer catalogues for furnishings and accessories.
To plan items (for example, decorations) from the graphical units catalogue, in the
Seite 103
7.2
1. The plan is in the graphical units catalogue. You have planned a wall layout and
added catalogue items.
2. Click the Insert tab.
3. To do this, in the Auto group, click Decoration:
4. Select the desired decoration style. To do this, click one of the following
buttons:
Decoration cottage
Decoration modern
Decoration classic
5. Click Add.
6. The program adds decoration items from the graphical units catalogue in the
plan.
7.3
3. Select the desired lighting situation. To do this, click one of the following
buttons:
Lighting bright
Lighting soft
Seite 104
7.4
Seite 105
7.5
Seite 106
Additional Topics
8.1
Style Details
The Style Details contain all the information on the selected product style.
Structure of the Style Details
The style details consist of the following areas:
Preview
Alerts
Favourite Styles
Current Settings
Options
Filter
Selecting styles
You edit styles in both tables:
Seite 107
Under Current Settings, you see the styles that can be edited. If you mark an entry,
the catalogue's style options that match the marked style are displayed in the Options
list.
If the Program title is marked in the Current Settings area, all the catalogue's
available product ranges (range entries) are displayed under Options.
If a Front Colour is marked, all the available colours of the selected product range are
displayed under Options.
Filtering styles
The list of styles and colours can be very long. You can reduce the number of styles
using various functions. You can:
Hide Invalid Options
Show Preferred Only
Filter the list using a search term
Hide Invalid Options
Styles that are unavailable may be displayed. Due to the countless plausibility checks
performed by manufacturers, it still may not be possible to immediately determine
which combination of styles and colours are available for a cabinet. If you activate Hide
Invalid Options, only the available styles/colours are displayed under Options.
If the program determines that items in the design use unavailable styles and colours, it
automatically changes to the first available style or colour. Automatic changes are
underlined.
By clicking the underlined styles and selecting a style in the right list, you markthem as
viewed and accepted, even if you select the same style that the program suggested. If
you do not confirm the changes in this way, an alert is prompted to indicate this when
you close the Style Details: You accept the changes with OK and return to the Style
Details with Cancel.
Show Preferred Only
Below the Options list, you can use the Show Preferred Only check box so that only
style combination options recommended by the manufacturer, for example with
matching plinth style, handles, etc. are displayed.
Filtering styles with a search term
With the filter function in the Style Details, you can shorten the list of styles by a search
term via the Filter field. This way, you find the style you are searching for faster.
You would like to design a handle. If you enter "Handle" in the Filter field, the list of the
handle styles is shortened to entries that contain the search term.
Seite 108
8.1.1
You can rename or delete favourites in Options (via tab File Options tab
Favourite Styles).
After a catalogue is updated, you can import the saved favourite styles in the new
catalogue via the Catalogue Administrator.
Seite 109
8.1.2
In Options, (tab File Options tab Style Details), you can set the default preview
type for opening the Style Details window.
What does the standard preview show?
The standard preview contains a number of details, such as the display of the style
colour and shapes of the handles, cornices and pelmets, glass doors, worktops and
worktop edges, etc. Depending on which detail you are currently editing, the
corresponding graphics are adjusted according to the selected style details:
Seite 110
If you change a style detail, the enhanced preview accesses the settings of all relevant
catalogues. This means that the wall, floor, ceiling and window colours are included
from the graphic catalogue in the preview image.
8.1.3
You control whether and which styles are to be prompted when starting and during the
plan.
Seite 111
The Enhanced Preview displays a large individual preview image that presents an
example layout of the planned kitchen according to the selected style details (the
Seite 112
Both preview types are automatically updated once you click the colours or styles in the
style details. The Enhanced Preview can access the settings of all relevant catalogues.
This means that the wall, floor, ceiling and window colours are included in the preview
image.
8.2
Tile plan
With the tile and wall plan, you can create professional tiled sections on one or more
walls. The tile plan consists of two main steps:
Planning and editing zones for the tiled section.
Assigning zones with tiles, borders, etc.
Where do you find the tile plan functions?
The tile plan is one of the functions that allows you to edit surfaces. The tile plan
functions are available in the Insert tab:
If you click the Coverings symbol, you can select the standard or advanced tile plan:
With the standard tile plan, you create the rectangular tiled section across the entire
width.
The advanced tile plan, allows you to plan cut-outs, extensions, angled cuts, etc.
Seite 113
Depending on whether you have opened the standard or advanced tile plan, various
functions are enabled in the Cover tab:
Can you switch between the standard and advanced editing mode of the tiled
section?
If you have already edited the selected wall with the Standard Wall function, the
surface for editing with the Advanced Wall function must be converted. If you open the
Coverings Advanced Wall function, a corresponding prompt is displayed. Walls that
were edited with the Advanced Wall function, can no longer be opened with the
Standard Wall function:
Seite 114
Figure: Dimensioning the tiling zone with dimension and witness lines
Seite 115
8.2.1
You very quickly switch into the tile plan by selecting the desired wall in a view and
pressing the shortcut CTRL + T.
Which functions are available in the standard tile plan?
The standard tile plan has functions that you allow you to complete the following work:
Planning identical tiled sections for several selected walls at the same time,
Adding rectangular tiling zones with height limits across the entire wall height,
Changing the position of the tiling zones (height limits),
Managing and using zone sets and
Simply assigning material to tiling zones.
Adding tiling zones
If in the Cover tab, you click the New
available:
Seite 116
In the standard tile plan, you can only add rectangular tiling zones and define their
height limits. The standard tiling zone is added with the upper and lower limit across
the entire wall:
With which tools can you edit the standard tiling zones?
In the standard tile plan, there are limited options for editing tiling zones:
8.2.2
symbol, you edit the limits of the tiling zones just like when
Positional Rectangle function.
Tiling Zones
Entering tiling zones in the standard and advanced tile plan.
Why do you plan tiling zones?
If you edit the style, surface or colour of a wall, the function refers to the entire wall.
With a tiled section, only one part of the wall is generally involved. To assign material to
this area, you must first enter tiling zones.
The tiling zone is the area in which the tiles or another material from the Room Design
catalogue is added as a surface.
A tiled section can consist of one or more tiling zones. The tiling zones are the defined
areas that may be assigned various tiles.
Adding a new tile zone
The are various methods to add a new tiling zone. In the Cover tab, click the New
symbol:
Seite 117
Positional Rectangle if you would like to add a rectangular tiling zone via a
reference to a height category or an absolute value.
Freehand Rectangle if you would like to add a rectangular tiling zone in the
advanced tile plan via two clicks.
Freehand Multi-Point if you would like to add a freely drawn tiling zone in the
advanced tile plan.
Adding rectangular tiling zones
In the Cover tab, click the symbol New Positional Rectangle:
In the standard tile plan, you can only add rectangular tiling zones and define their
height limits:
Seite 118
In the advanced tile plan, you can also define the width of the tiling zones for these
methods:
Seite 119
Figure: some of the marked tiling zone (red) overlaps the upper tiling zone (dotted black lines)
Seite 120
With this function, you can delete the tasks of the tiler and the installer in the tile plan if,
for example, a niche plate in the sub-areas is to be planned in over the tiles:
Figure: tiling zone (1) assigned with a combination of tiles and tiling zone (2) with a stainless steel niche
plate
If tiling zones are behind items (for example, wall units), you do not have to plan any
notches for the cabinets. You can define whether or not the tiled section behind the
cabinets is tiled. To do this, select the desired items and in the Items tab, activate or
deactivate the Attributes
Tile behind function. If the function for an item is active,
no tiles in this area of the tiling zone are installed or no tile area is calculated.
Tiling zone in the foreground or background?
In case of overlap, the most recently planned tiling zone always covers the area of the
previously drawn tiling zone in the area of the overlap. It is in the foreground. You
change the heights of the tiling zones. The functions are located in the Cover tab in the
Zones group:
In the planning area, select the tiling zones whose height you would like to change.
Click:
Bring To Front to set the zone in the front layer,
Bring Forward to set the zone one layer to the front,
Send To Back to set the zone in the rear layer,
Send Backward to set the zone one layer backwards,
Seite 121
Click:
Select Select All to mark all tiling zones.
Select and select a tiling zone in the gallery.
Select and holding down the SHIFT key, click several tiling zones in the gallery.
Finally, click Select again.
Select Deselect All to delete all tiling zones from the selection.
Can you move tiling zones?
Yes. You can completely move all advanced tiling zones in the planning area.
In the Cover tab, click the Move Zone(s)
The
symbol.
Seite 122
This function can also be used to delete edited surfaces on other elements (ceiling,
floor, cabinets, niches, etc.).
Can you edit the shape of tiling zones?
Yes. In the advanced tile plan, you can edit the edges and corners of the tiling zones.
There are tools available for this in the Cover tab:
8.2.3
Seite 123
Seite 124
If you are planning a tiled section with continuous borders, the tiled section, for
example, consists of three zones that are above each other, which are tiled with
different tiles (tiles, borders, tiles).
Seite 125
Seite 126
You can edit (select another style) and delete the added styles. To do this, click the
corresponding button.
You can change the Width, Height and Orientation of the tiles just as in the
standard tile plan. These values also apply if you select a combination of styles.
How do you combine materials in a tiling zone?
In the advanced tile plan, you can combine several styles from one material group in a
tiling zone. You cannot combine styles from different material groups in a tiling zone. If
you change the material group, styles from the original material group are deleted.
If you have added other styles from the same material group using the Add button, the
styles are first used for the same parts. The dimension and orientation apply to all
styles in the combination:
Figure: combined styles in the same parts with a standard tile pattern
Seite 127
Herringbone if the tiles are to be installed alternatively on the wide and the narrow
edge.
The Herringbone pattern has a very pronounced effect if you use tiles with uneven
sides (height width).
If you have added three styles with the identical tile size, you create the following
effect:
Different patterns are created if you switch the values for height and width:
Seite 128
starts further to the right. If you lower the value, it starts further to the left. If the offset is
changed, each second row is moved in relation to the first row. The uneven rows
correspond to the first row:
for example, you create a brick pattern with an offset (77%) and a combined colour
scheme (60/40):
Instead of the preview, all parts of the styles and Total Coverage are displayed in
percent.
If you edit a style, you can define the user-defined part of the style. :
Seite 129
Seite 130
example, behind wall units, where the material must be recessed. In the advanced tile
plan, you can optimise the waste by defining the starting point of the tiles yourself.
- With this symbol, you define the starting point of the tiles. If you activated the Origin
Point
symbol, a cross-hair
symbol is displayed for the tile starting point in each
tile zone. Drag the cross-hair symbol to the desired point in the tiling zone.
Which values can you edit?
If you click a cross-hair symbol, the field X Offset and Y Offset fields in the menu
ribbon are enabled. You can enter the exact values here. The values can be positive or
negative depending on in which direction you move the starting point.
You can also select a tile reference point. If you have activated the Origin Point
symbol, the following options are enabled in the menu ribbon:
Activate:
From Corner, the tile arrangement starts at the defined starting point with a tile
corner.
From Centre, the tile arrangement starts at the defined starting point in the centre
of the selected tile.
You have deactivated the Tile behind setting for the items that are planned above the
top edge of the worktop. You would like to install the tiles so that there is as little waste
as possible:
The tile row is to be installed under the lower edge of the wall unit without any waste.
The starting point is moved to the lower edge of the wall units and the side wall of the
built-in refrigerator. The tile reference point is the tile corner:
Seite 131
8.2.4
Seite 132
symbol.
Seite 133
8.3
Installation plan
8.3.1
Specific items in the plan are provided with installation symbols. For example, these
items include sink base units that are supplemented with two individual power outlets
or hobs in whose wall area niche power outlets are planned.
The program detects all cabinet equipment, electrical equipment and accessory items,
which are to be provided with the necessary installation symbols. They are added in
the required quantity at the corresponding position. You can manually move the
installation symbols, remove individual symbols or manually add symbols.
Automatically added installation symbols are only visible in the Elevation view. It is
especially useful when the installation symbols are displayed in the stove and exhaust
hood area of island solutions, in particular, in the plan. In this case, we recommend
deleting the automatically planned installation symbol or replacing the installation
symbol from the installation catalogue for the Plan and Elevation view.
What happens if you reopen the function?
If you reopen the command, you can decide whether you would like to rebuild or
complete the automatic symbols:
With Rebuild, you delete all automatically planned installation symbols. All
necessary installation symbols are then added again. Manually planned installation
symbols are not removed here.
When completing, the program detects whether new items were planned. All
previously planned installation symbols remain.
Seite 134
Seite 135
symbol.
Seite 136
8.3.2
Click Complete if you would like to add the installation symbols that have
become necessary in the plan.
Click Rebuild if you would like to delete all previously automatically created
installation symbols and would like to completely rebuild new installation
symbols.
6. Manually add the installation symbols. Place the cursor in the Elevation view
roughly on the position of the plan where you would like to add a drain, for
example, behind the sink base unit.
7. Click the Insert tab.
8. Click the Catalogue Items
symbol.
Seite 137
8.3.3
1. Switch to the Plan view, the Elevation view or the Item List.
2. Select the desired installation symbol and press the DELETE key.
3. If you would like to delete all installation symbols of a catalogue, select the
installation symbols, for example, via the layer-related selection:
Click the Home tab.
Select Select
Items By Layer.
Click the Installations Installations entry.
If you have added installation symbols from several catalogues, you can
select several entries if you hold the CTRL key when clicking in the gallery:
Seite 138
Final steps
9.1
symbol:
Seite 139
The No TVA, Branch No. fields are global fields. These fields are created as master
data by the administrator for all users and all plans and the values are automatically
created.
The Customer Reference field is a customer field that is created via the customer
master data in the KPS customer management system.
When opening the customer details, the cursor is on the Deposit field. In the date field
to the right of the Deposit field, the date when the plan was created for the first time is
specified as entry date of the plan. You can change the date. If you click the date field,
the calendar function opens.
In the Salutation field,"." is entered by default. This dot ensures that all invoice
address fields are automatically entered in the corresponding delivery address fields,
regardless of whether or not entries have already been made in these fields.
If you would only like to use individual entries from the invoice address in the delivery
address, you must delete the dot in the Salutation. You can then set a dot in each field
whose entries you would like to apply and make different entries in the other fields.
You need the No TVA, Delivery identifier and Deposit ID fields when transferring
planning data to other programs, for example ECORO, MHS or another merchandise
management program. The information entered in these fields controls the correct
allocation of the planning data within the program to which the data was transferred.
In the Check of dimensions field, you save the information on whether or not
measurements are to be taken at the customer's location. You can enter this
information with Y (yes) or N (no).
You enter additional order data in the other fields.
The Information field is reserved for internal program information. Data in this field
cannot be overwritten or deleted.
9.2
Printing offers
You would like to print an offer for a customer after you have completed a plan for him.
To do this, first use one of the standard forms provided by SHD, for example, "Offer
with unit price", or prepare your own form with the form Wizard:
symbol.
Seite 140
Name of
symbol.
If you would like to print several reports of the current plan simultaneously, you can
also use the Batch Printing function. To use this function, you must have defined the
batch (via tab File
Options tab Batch Printing). Open the Batch Printing function.
To do this, navigate to the File tab Print under Settings, click the arrow after Print
Standard and select the Print Batch Set entry:
Select the desired set and start the printout of a stack of forms and views.
Seite 141
9.3
Saving plans
Regularly save the plans while you work and before you close it so that no data is lost if
the program is interrupted (for example, through a power failure). Also use the
automatic saving intervals that you set in Options (tab File Options tab Save).
There are two functions available for saving the plan in File tab Save and Save As.
Use Save to intermittently save the changes to the current plan.
Use Save As... to save a copy of the current plan under a new name. If the plan
already contains an offer number, order code or invoice number, it is not saved into
the copy. It must be re-entered in the copy.
If you have saved a plan with Save As..., the new plan is displayed in the Design
window.
9.4
Seite 142
10
Shortcuts
The default keyboard shortcuts detailed below are available in the design program
once it has been installed.
Tab
Group
Function
Shortcut
Save
CTRL + S
Close
CTRL + W
CTRL + P
Print Screen
CTRL + ALT + S
Save Screen
CTRL + SHIFT + S
Exit
CTRL + E
Paste
CTRL + V
Cut
CTRL + X
Copy
CTRL + C
Customer Details
CTRL + 0
Default Style
CTRL + Q
Manage Materials
CTRL + SHIFT + M
Print Areas
CTRL + SHIFT + N
Pricing Centre
CTRL + ;
Block evaluation
CTRL + B
Catalogue
Information
CTRL + I
Editing
Delete
DEL
Duplicate
CTRL + D
Select All
CTRL + A
Add Ceiling
CTRL + H
Add Floor
CTRL + G
Catalogue Items
CTRL + SHIFT + A
Auto Features
CTRL + K
Edit Worktops
CTRL + J
CTRL + SHIFT + J
CTRL + F
File
Home
Clipboard
Design
Commerci
al
Insert
Layout
Standard
Seite 143
Tab
Group
Cursor
Function
Shortcut
Design Wizard
CTRL + ALT + Y
Move Cursor Up
SHIFT + UP-ARROW
key
SHIFT + DOWN-ARROW
key
SHIFT + RIGHT-ARROW
key
SHIFT + LEFT-ARROW
key
Move Cursor
Absolutely/Relatively Away
Move Cursor
Absolutely/Relatively
Towards
Rotate Cursor By
CTRL + R
Rotate Cursor By 90
CTRL + 9
Single Tool
Multiple Tool
Palette
Catalogue
Items
View
Design
View
CTRL + SHIFT + 9
CTRL + SHIFT + 4
Unit Selector
CTRL + SHIFT + U
Wall Selector
CTRL + SHIFT + W
CTRL + SHIFT + R
Door Selector
CTRL + SHIFT + O
Window Selector
CTRL + SHIFT + P
CTRL + SHIFT + C
Niche Selector
CTRL + SHIFT + H
Installation Selector
CTRL + SHIFT + K
CTRL + SHIFT + G
Plan
CTRL + 3
Elevation
CTRL + 4
Perspective
CTRL + 5
Seite 144
Tab
Items
Group
Function
Shortcut
Item List
CTRL + 2
Report
CTRL + 6
Multi-View
CTRL + 7
Display
New Layer
CTRL + L
Navigate
CTRL + SHIFT + V
Zoom
Zoom In
CTRL + +
(plus sign in the
keyboard's numeric
keypad)
Zoom Out
Reset Zoom
CTRL + /
Selected Style
CTRL + SHIFT + Q
Change Material
CTRL + U
Modifiers
CTRL + M
Left Handing
CTRL + SHIFT + [
Right Handing
CTRL + SHIFT + ]
Move Item(s) Up
CTRL + DOWN-ARROW
key
CTRL + RIGHT-ARROW
key
CTRL + LEFT-ARROW
key
Push Item(s)
Absolutely/Relatively Away
Push Item(s)
Absolutely/Relatively
Towards
CTRL + ALT + 5
CTRL + ALT + L
Properties
Movement
Seite 145
Tab
Group
Function
Shortcut
CTRL + ALT + ,
Other Functions
Shortcut
CTRL + Z
CTRL + Y
Seite 146