Product Description
Product
Key Features
Typical Benefits
Method of Application
Spray, Paint, Dip, Addmix
Application freedom
Formulation freedom
Silblock WA
Resistance to aqueous-oil-and-acidic-based
stains
Broader utility
Water Absorption
15
10
5
0
Ceramic
Brick
Calcium
Silicate Brick
Cement
Plaster
Cement
Mortar
Substrate
Water-Based Silblock masonry water repellents
Solvent-Based Silblock masonry water repellents
Uncoated
Note: Test data. Actual results may vary.
Concrete
1400
1200
1000
800
600
400
200
0
Untreated
Silblock WSR
masonry water
repellent
Fluoropolymer
Silblock WA
masonry water
repellent
Fluorosilane
Organic Anti-Stain
Untreated
with
Silblock WSR
water repellent
Immediately After
Application of Stains
2 hours
1147
6 hours
1250
24 hours
1265
59
118
88
265
147
574
29
44
338
59
59
691
103
118
1250
Time
Note: Test data. Actual results may vary.
Untreated
with
Silblock WSR
water repellent
Terracotta
Untreated
with
Silblock WSR
water repellent
Untreated
with
Silblock WSR
water repellent
Figure 4-6: Building Refurbished with Paint Additive: Silblock F Masonry Paint Additive
Silblock masonry water repellents can help provide a dry environment discouraging
the staining that can occur on a wet environment.
Silblock WSR
Silblock WA
Silblock LD
CoatOSil* 2059
Silblock SO
Silblock LO-N
Concrete
Exterior Plaster
Light Concrete
Natural Stone
Clay Brick
Horizontal Barrier
Terracotta
Saltillo
Marble
Granite
Lime Sandstone
Legend:
E = Excellent
G = Good
S = Suitable
Speciality siloxane emulsion. This emulsion combines oleophobic and hydrophobic behavior
in a single product, typically resulting in an outstanding reduction of capillary water
absorption and stain resistance. May be considered for application to highly alkaline
building materials such as fresh concrete, plaster, calcium silicate brick, fibrous cement
and expanded concrete.
Silblock WA
masonry water repellent
Silblock LD
masonry water repellent
CoatOSil* 2059
masonry water repellent
Emulsion of an amino functional siloxane. May be considered for calcium carbonate based
substrates such as marble, limestone and calcium silicate brick. This product may also
impart stain resistance on marble substrates.
Silblock LO-N
masonry water repellent
Silblock SO
masonry water repellent
Silblock F
masonry paint additive
Polysiloxane emulsion may be considered for use as masonry paint additive. This emulsion
may provide high vapor permeability and low water absorption.
Silblock WA
Silblock LD
CoatOSil* 2059
Product Type
Emulsion
Emulsion
Emulsion
Emulsion
Active Substance
Content
30%
60%
35%
35%
Appearance
White
White
White
White
Potential Uses
Faade impregnation
In factory treatment
Water proofing additive
for concrete
Faade impregnation
In factory treatment
Typical Features
1. Oldest water-based
technology
2. Recommend for large
pored substrate
1. Beading effect
2. Compatible with calcium
carbonate substrates
3. Stain resistance
Composition
Solvent-less siloxane /
alkoxysilane emulsion
in water
Solvent-less alkylated
alkoxy siloxane emulsion
in water
Emulsion of an amino
functional siloxane
Specific Gravity
1.025
0.98
1.06
0.99
Recommended Dilution
1:5 - 1:2
1:11 - 1:5
1:6 - 1:3
1:6 - 1:3
pH
5 to 6
8 to 10
7 to 8.5
N/A
>100 (>212)
202(1)
298(1)
80(1)
121(1)
Silblock LO-N
Product Type
Solution
Pure substance
Active Substance
Content
30%
100%
Appearance
Colorless to yellowish
Yellow
Potential Uses
Faade impregnation
Typical Features
1. Color enhancement
2. Good barrier properties
Composition
Solvent-less alkylated
alkoxy siloxane
Specific Gravity
0.8
1.1
Recommended Dilution
1:5 - 1:2
1:17 - 1:10
pH
N/A
N/A
>700
224(1)
Primer
Silblock F
Silblock WA
Silblock LD
Product Type
Emulsion
Emulsion
Emulsion
Emulsion
Active Substance
Content
54%
60%
60%
35%
Appearance
White
White
White
White
Potential Uses
Primer
Additive to silicone masonry
paints/plasters for
improved water resistance
and beading
Typical Features
Cost/efficient formulations
Used primarily with stryene
acrylics
Excellent scrub resistance
Patented manufacturing
process
Long dilution stability
Stable emulsion
Dense substrate penetration
Oldest water-based
technology
Recommended for large
pored substrate
Composition
Resin emulsion
Siloxane
Solvent-less siloxane/
alkoxysilane emulsion
in water
Solvent-less alkylated
alkoxy siloxane emulsion
in water
Specific Gravity
1.07
0.98
1.06
pH
5.5 to 8.5
5.5 to 7
8 to 10
7 to 8.5
>100 (>212)
>100 (>212)
90 (194)
>100 (>212)
Patent Status
Limitations
Customers must evaluate Momentive Performance Materials
products and make their own determination as to fitness of use
in their particular applications.
Emergency Service
Momentive Performance Materials maintains an around-the-clock emergency service for its products. The American Chemistry Council
(CHEMTREC), Transport Canada (CANUTEC), and the Chemical Emergency Agency Service also maintain an around-the-clock emergency
service for all chemical products:
Location
518.233.2500
CHEMTREC: 800.424.9300
Alaska, Hawaii
518.233.2500
CHEMTREC: 800.424.9300
Canada
518.233.2500
+32.(0)14.58.45.45 (Belgium)
+518.233.2500
At sea
DO NOT WAIT. Phone if in doubt. You will be referred to a specialist for advice.
E cs-na.silicones@momentive.com
Latin America
Specialty Fluids
UA, Silanes and Specialty Coatings
RTVs and Elastomers
Consumer Sealants & Construction
Sealants and Adhesives
T
T
T
T
+1.800.523.5862
+1.800.334.4674
+1.800.332.3390
+1.877.943.7325
F
F
F
F
+1.304.746.1654
+1.304.746.1623
+1.304.746.1623
+1.304.746.1654
T
T
T
T
+54.11.4862.9544
+55.11.4534.9650
+52.55.5899.5135
+58.212.285.2149
F
F
F
F
+54.11.4862.9544
+55.11.4534.9660
+52.55.5899.5138
+58.212.285.2149
E cs-la.silicones@momentive.com
E cs-eur.silicones@momentive.com
T +00.800.4321.1000
T +31.164.225350
Pacific
E cs-ap.silicones@momentive.com
T +0120.975.400
T +0.81.276.20.6182
F +81.276.31.6259
T +1.607.786.8131
T +1.800.295.2392
F +1.607.786.8309
Worldwide Hotline
Visit us at Momentive.com
THE MATERIALS, PRODUCTS AND SERVICES OF MOMENTIVE PERFORMANCE MATERIALS INC., MOMENTIVE PERFORMANCE MATERIALS USA INC., MOMENTIVE PERFORMANCE MATERIALS ASIA
PACIFIC PTE. LTD., MOMENTIVE PERFORMANCE MATERIALS WORLDWIDE INC., MOMENTIVE PERFORMANCE MATERIALS GmbH, THEIR SUBSIDIARIES AND AFFILIATES DOING BUSINESS IN LOCAL
JURISDICTIONS (collectively SUPPLIERS), ARE SOLD BY THE RESPECTIVE LEGAL ENTITY OF THE SUPPLIER SUBJECT TO SUPPLIERS STANDARD CONDITIONS OF SALE, WHICH ARE INCLUDED IN THE
APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT, PRINTED ON THE BACK OF ORDER ACKNOWLEDGMENTS AND INVOICES, AND AVAILABLE UPON REQUEST. ALTHOUGH ANY INFORMATION,
RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN IN GOOD FAITH, SUPPLIERS MAKE NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT THE RESULTS DESCRIBED HEREIN
WILL BE OBTAINED UNDER END-USE CONDITIONS, OR (ii) AS TO THE EFFECTIVENESS OR SAFETY OF ANY DESIGN INCORPORATING SUPPLIERS PRODUCTS, MATERIALS, SERVICES, RECOMMENDATIONS
OR ADVICE. AFOREMENTIONED EXCLUSIONS OR LIMITATION OF LIABILITY ARE NOT APPLICABLE TO THE EXTENT THAT THE END-USE CONDITIONS AND/OR INCORPORATION CONDITIONS CORRESPOND
TO THE RECOMMENDED CONDITIONS OF USE AND/OR OF INCORPORATION AS DESCRIBED BY SUPPLIER IN ITS PRODUCT DATA SHEET AND/OR PRODUCT SPECIFICATIONS. EXCEPT AS PROVIDED IN
SUPPLIERS STANDARD CONDITIONS OF SALE, SUPPLIERS AND THEIR REPRESENTATIVES SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS
OR SERVICES DESCRIBED HEREIN.
Each user bears full responsibility for making its own determination as to the suitability of Suppliers materials, services, recommendations, or advice for its own particular use. Each user must identify and
perform all tests and analyses necessary to assure that its finished parts incorporating Suppliers products, materials, or services will be safe and suitable for use under end-use conditions. Nothing in this
or any other document, nor any oral recommendation or advice, shall be deemed to alter, vary, supersede, or waive any provision of Suppliers Standard Conditions of Sale or this Disclaimer, unless any such
modification is specifically agreed to in a writing signed by Suppliers. No statement contained herein concerning a possible or suggested use of any material, product, service or design is intended, or should
be construed, to grant any license under any patent or other intellectual property right of Suppliers or any of its subsidiaries or affiliates covering such use or design, or as a recommendation for the use of
such material, product, service or design in the infringement of any patent or other intellectual property right.