Question 1:
ID# 146639
There are five systems running in the cluster, now the sixth machine is
booting and will join the cluster. Which of the following is true about the
building its configuration database.
A. From the highest-numbered system.
B. From the lowest-numbered system.
C. From any system it first communicates.
D. From the firstsystem that came online.
You Chose:
Correct Answer(s):
[B]
ID# 725514
Which of the following command set the automatic startup policies to Load?
A. hagrp -modify ora_sg AutoStartPolicy Load
B. hagrp -modify ora_sg autostartpolicy Load
C. hastart -modify ora_sg AutoStartPolicy Load
D. hasys -modify ora_sg AutoStartPolicy Load
You Chose:
Correct Answer(s):
[A]
ID# 221189
You want to take out one of the system from a running 3 node cluster there
are two application running on that system. All the application are switched
to other systems.
Which of the following files should be edited to remove the server?
A. /etc/gabtab
B. /etc/hosts
C. /etc/llttab
D. /etc/llthosts
You Chose:
Correct Answer(s):
[A]
[C]
[D]
ID# 071103
Correct Answer(s):
[B]
ID# 451840
offline, and vcs does not make any other attempt to bring the service group
online.
D. If there is no other system available for failover the service group remains
offline, and vcs continously attempt to bring the service group online.
You Chose:
Correct Answer(s):
[A]
[C]
ID# 137515
When the first system boots in a cluster environment the system reads
main.cf and and builds in-memory configuration database. If another
system also boots while the first system is booting, which of the following is
going to happen?
A. The second system will wait for the first system to build its configuration
database and then it will copy the configuration.
B. The second system will join the cluster without proper configuration datase.
C. The second system will not join the cluster and administrator has to force it
to join the cluster.
D. Both system will build their own configuration database.
You Chose:
Correct Answer(s):
[A]
ID# 111404
In a two system cluster the heartbeat link failed and you have reestablished the heart beat links with stopping vcs.
Which of the following will happen?
A. VCS continues to run on the lowest numbered systems.
B. VCS continues to run on the highest numbered systems.
C. VCS will be stopped on the lowest numbered systems.
D. VCS will be stopped on the highest numbered systems.
You Chose:
Correct Answer(s):
[A]
[D]
ID# 381621
Correct Answer(s):
[A]
ID# 464264
Correct Answer(s):
[B]
ID# 605796
Correct Answer(s):
[C]
[E]
[G]
ID# 871951
Correct Answer(s):
[B]
ID# 423838
E. Bind Information.
F. Dhcp Information.
You Chose:
Correct Answer(s):
[A]
[C]
[D]
ID# 810488
Correct Answer(s):
[A]
ID# 413377
You want to add one more system to a running 2 node cluste, which of the
following command will modify the SystemList and AutoStartList in the
main.cf file?
A. haconf -makerw hagrp -modify toolSG SystemList -add server3 hagrp
-modify toolSG AutoStartList -add server3 hasys -add server3 haconf -dump
-makero
B. hagrp -modify toolSG SystemList -add server3 hagrp -modify toolSG
AutoStartList -add server3 hasys -add server3 haconf -dump -makero
C. hagrp -modify toolSG SystemList -add server3 hagrp -modify toolSG
AutoStartList -add server3 haconf -dump -makero
D. hagrp -modify toolSG SystemList -add server3 hagrp -modify toolSG
AutoStartList -add server3
You Chose:
Correct Answer(s):
[A]
ID# 766170
When the first system boots it enters to LOCAL_BUILD, and once it loads all
the configuration information it enters to RUNNING state. If a second
system boots while the first system is in LOCAL_BUILD, the second system
will enter
A. Build its own configuration database.
B. Will wait unitl the first system build its own configuration database.
C. The second system will enter STALE_ADMIN_WAIT.
D. The second system will enter CURRENT_DISCOVER_WAIT.
You Chose:
Correct Answer(s):
[B]
ID# 881700
Which of the following situation will allow to keep binery files of the one of
the database application files to be stored locally instead of the shared disk.
A. When the database application is installed on the local disk, instead of the
shared disk.
B. When the database application is installed on the shared disk, instead of the
local disk.
C. Databse application binery files cannot be stored locally.
D. When the database application is installed on the san, instead of the local
disk.
You Chose:
Correct Answer(s):
[A]
ID# 321737
Category: Multiple-Option
The defult url that connects to vcs gui via a web browser is... ? The IP
address for the web interface is 10.10.10.1.
You Chose: [No Answer Given]
ID# 075975
When you try to start VCS on newly installed system there are numerous
errors related to service groups. Which of the following files should you look
for the errors?
A. /etc/VRTSvcs/log/engine_A.log
B. /var/VRTSvcs/log/engine_A.log
C. /opt/VRTSvcs/log/engine_A.log
D. /etc/VRTSvcs/log/engine_B.log
You Chose:
Correct Answer(s):
[B]
ID# 381172
You Chose:
Correct Answer(s):
[A]
[D]
ID# 999562
After a reboot all the system enters STALE_ADMIN_WAIT, and wont start
the cluster or serivces? What could be the reason?
A. All the systems in the cluster rebooted at the same time and it created a
.stale file.
B. The configuration was opened when the HAD daemon were stopped by force.
C. The application agent created a .stale file in the /etc/VRTSvcs/conf/config
directory on purpose.
D. The administrator created a .stale file in the /etc/VRTSvcs/conf/config
directory on purpose.
You Chose:
Correct Answer(s):
[A]
[B]
[D]
ID# 576456
Correct Answer(s):
[A]
[D]
ID# 787941
Correct Answer(s):
[B]
ID# 959691
Correct Answer(s):
[A]
[D]
ID# 992384
Correct Answer(s):
[D]
ID# 381514
Correct Answer(s):
[A]
ID# 461751
You Chose:
Correct Answer(s):
[A]
ID# 648135
Correct Answer(s):
[C]
ID# 331812
Which of the following command is true about parent and child service
group faults?
A. If the parent faults and fails over the child service group is not affected.
B. If the parent faults and fails over the child service group is taken offline or
fails over.
C. If a child service group faults and fails over then the parent service group
also faults and fails over.
D. If a child service group faults and fails over then the parent service group is
not affected.
You Chose:
Correct Answer(s):
[A]
[C]
ID# 890158
You want to change the default timeout value for LLT and restart the
service?
which of the following file and command will perform this function?
A. Edit /etc/llttab, put set-timer peerinact:1000. use lltconfig -u to unconfigure
LLT and lltconfig -c to restart LLT.
B. Edit /etc/llthosts, put set-timer peerinact:1000. use lltconfig -u to
unconfigure LLT and lltconfig -c to restart LLT.
C. Edit /etc/lgabtab, put set-timer peerinact:1000. use lltconfig -u to
unconfigure LLT and lltconfig -c to restart LLT.
D. Edit /etc/VRTSvcs/conf/config, put set-timer peerinact:1000. use lltconfig -u
to unconfigure LLT and lltconfig -c to restart LLT.
You Chose:
Correct Answer(s):
[A]
ID# 031878
A. A real potential for a network partitioning, because a halted system does not
produce heartbeat and other members of the cluster thinks the system failed.
B. No real potential for a network partitioning.
C. The machine should be rebooted instead of typing go.
D. The machine should be taken out of cluster reinstall VCS again.
You Chose:
Correct Answer(s):
[A]
[C]
ID# 751708
You want to take out one of the system from a running 3 node cluster there
are two application running on that system. All the application are switched
to other systems, after removing all the heartbeat links which of the
following command will remove the system from the cluster?
A. haconf -makerw hagrp -modify toolSG SystemList -delete server3 hagrp
-modify toolSG AutoStartList -delete server3 hasys -delete server3 haconf
-dump -makero
B. hagrp -modify toolSG SystemList -delete server3 hagrp -modify toolSG
AutoStartList -delete server3 hasys -delete server3 haconf -dump -makero
C. hagrp -modify toolSG SystemList -delete server3 hagrp -modify toolSG
AutoStartList -delete server3 haconf -dump -makero
D. hagrp -modify toolSG SystemList -delete server3 hagrp -modify toolSG
AutoStartList -delete server3
You Chose:
Correct Answer(s):
[A]
ID# 521133
B. gabconfig
C. lltconfig -nvv
D. LLTSTAT -nvv
You Chose:
Correct Answer(s):
[A]
ID# 580325
Which of the following methods can be used to warn vcs admins about a
overloaded system?
A. System panic.
B. Load
C. event monitor
D. triggers
You Chose:
Correct Answer(s):
[D]
ID# 801578
Correct Answer(s):
[A]
[B]
ID# 461335
Correct Answer(s):
[C]
ID# 741667
Which of the following scenarios are possible about online and offline of
resources and service groups?
A. Child must come online first because parent resource depends on the child.
B. Parent can come online on any system regardless of the child resources.
C. Parent can come online only where its child resources are available.
D. Parent must come online first because child resource depends on the child.
You Chose:
Correct Answer(s):
[A]
[C]
ID# 281066
In a two system cluster one of the heartbeat link failed, there is no disk
heartbeat configured. The systems are in jeopardy, which of the following
Correct Answer(s):
[B]
ID# 611410
Category: Multiple-Option
Your are adding a service group, which of the following attribute you will
set for a particular node, the service group to run on?
You Chose: [No Answer Given]
ID# 230722
Category: Multiple-Option
ID# 936723
You have installed VCS with a demo license, which of the following
command will install a license?
A. vxlicinst -k License_key
B. vxlictest -k License_key
C. vxlicrep -k License_key
D. vxlicense -c License_key
You Chose:
Correct Answer(s):
[A]
ID# 131447
Correct Answer(s):
[A]
[C]
[D]
ID# 901435
Which of the following command will files removed or renamed to start one
node cluster?
A. /etc/llttab
B. /etc/gabtab
C. /etc/llthosts
D. /etc/VRTSvcs/conf/config/main.cf
You Chose:
Correct Answer(s):
[A]
[B]
ID# 181073
Correct Answer(s):
[A]
[B]
[D]
ID# 231717
Correct Answer(s):
[B]
ID# 141149
You want to add one more system to a running 2 node cluster, which of the
following things you should do?
A. Edit the configuration files and include the new server name to configuration
files.
B. The server should autometically join the cluster.
C. run installvcs command.
D. run installvcs -installonly and copy the configuration files from other machine.
You Chose:
Correct Answer(s):
[A]
[D]
ID# 828113
Which of the following mechanism VCS 4.0 uses to prevent split brain?
A. HAD
B. I/O fencing.
C. SCSI Disk reservation.
D. HASHADOW
You Chose:
Correct Answer(s):
[B]
ID# 704618
Correct Answer(s):
[A]
[B]
ID# 294693
Which of the following is true about parent and child service groups?
A. A parent resource can have multiple child resources.
B. Service group dependency can be at any level deep in the dependecy tree.
C. Cyclical dependency is allowed.
D. A child resource can have multiple parent resources.
You Chose:
Correct Answer(s):
[D]
ID# 180145
Which of the following option with gabconfig command specifies the number
of system must be present before the seeding can take place?
A. gabconfig -c -n 2
B. gabconfig -all
C. gabconfig -a -c -n 2
D. gabconfig -c -x 2
You Chose:
Correct Answer(s):
[A]
ID# 808828
What determines failover and failover behavior for linked service groups?
A. The target systems are determined by the failover policy.
B. The target systems are determined by the service group policy.
C. The target systems are determined by the system list in the types.cf file.
D. The target systems are determined by the system list in the main.cf file.
You Chose:
Correct Answer(s):
[A]
[D]
ID# 171588
Correct Answer(s):
[B]
[C]
[E]
ID# 640183
After a reboot all the system enters STALE_ADMIN_WAIT, and wont start
the cluster or serivces? Configuration files are valid, how do you restart?
A. hastop -all -force
B. hasys -force server1
C. hagrp -force start
D. hastart -all -force
You Chose:
Correct Answer(s):
[B]
ID# 151478
Correct Answer(s):
[A]
ID# 078782
When you try to start VCS on newly installed system there are numerous
errors related to database agent. Which of the following files should you
Correct Answer(s):
[A]
ID# 128359
One of the service group AppSG1 was running on server3, due to a jeopardy
condition it became auto disabled, which of the following command will
enable the resource again on server1?
A. hastart -autoenable AppSG1 -sys server1
B. haconf -autoenable AppSG1 -sys server1
C. hagrp -autoenable AppSG1 -sys server1
D. hasys -autoenable AppSG1 -sys server1
You Chose:
Correct Answer(s):
[C]
ID# 081604
You Chose:
Correct Answer(s):
[D]
ID# 657966
Which of the following command will shutdown VCS but will let all the
application running?
A. hastop -all -force
B. hastop
C. hasys -all -force
D. hastop -all
You Chose:
Correct Answer(s):
[A]
ID# 527761
Correct Answer(s):
[D]
ID# 021770
Correct Answer(s):
[A]
[C]
ID# 898706
Correct Answer(s):
[A]
[B]
ID# 891546
Correct Answer(s):
[D]
ID# 201593
Category: Multiple-Option
Correct Answer(s): ".stale file is created when the configuration is open for
editing."
ID# 894620
Correct Answer(s):
[B]
ID# 721221
Which of the following commands will start LLT and GAB on the newly
added system to an existing cluster?
A. lltconfig
B. lltconfig
C. lltconfig
D. None of
-c gabconfig -c -n 3 gabconfig -a
gabconfig gabconfig
start gabconfig -c start gabconfig start
the above
You Chose:
Correct Answer(s):
[A]
ID# 341071
Category: Multiple-Option
In a three system cluster the last heartbeat link failed on one of the
machine, the machine was running a service group called APPSG3. Which of
the following is going to happen to the service group?
You Chose: [No Answer Given]
ID# 935824
Correct Answer(s):
[A]
[B]
ID# 701102
Correct Answer(s):
[B]
ID# 844918
Category: Multiple-Option
ID# 091574
You want to take out one of the system from a running 3 node cluster there
are two application running on that system, which of the following
command will freeze system and switch the application to other running
systems?
A. hasys -freeze server3 hastop -sys server3 evacuate
B. hasys -freeze server3 hastop -sys server3 hasys -evacuate server3
C. Uninstall VCS packages, when VCS will not run then the application will be
forced to failover.
D. Shutdown the system then the application will failover anyway no commands
are necessary.
You Chose:
Correct Answer(s):
[A]
[B]
ID# 121052
Correct Answer(s):
[A]