Table of contents
About the FactoryTalk View documentation ........................................ 5
Find information in the FactoryTalk View Installation .................. 6
Where you can find this manual ..................................................... 6
Other Documents ............................................................................ 7
Open the FactoryTalk View online manuals .................................. 7
Legal Notices ........................................................................................ 8
Preface
Chapter 1
FactoryTalk View
Machine Edition
system basics
Chapter 2
Install, activate, and
uninstall FactoryTalk
View on a personal
computer
Table of contents
Chapter 3
Run FactoryTalk
View ME Station on
PanelView Plus
terminals
Chapter 4
Run FactoryTalk
View ME Station on a
personal computer
Preface
This manual describes the following:
The contents of this Installation Guide appear in the order you would use
during installation on new or existing systems:
About the
FactoryTalk View
documentation
Release Notes . Read the Release Notes before you begin installing or
working with FactoryTalk View and supporting software.
Release Notes for FactoryTalk View ME, FactoryTalk Services
Platform, RSLinx Enterprise, and RSLinx Classic are available from
the FactoryTalk View installation DVD.
Preface
Preface
Tip:
Other Documents
Document
Description
Preface
Legal Notices
Copyright notice
2015 Rockwell Automation, Inc. All rights reserved. Printed in USA.
This document and any accompanying Rockwell Software products are
copyrighted by Rockwell Automation, Inc. Any reproduction and/or
distribution without prior written consent from Rockwell Automation, Inc. is
strictly prohibited. Please refer to the license agreement for details.
End User License Agreement (EULA)
You can view the Rockwell Automation End-User License Agreement
("EULA") by opening the License.rtf file located in your product's install
folder on your hard drive.
Trademark Notices
Allen-Bradley, ControlLogix, Data Highway Plus, DH+, Data Highway II,
FactoryTalk, Logix5000, PanelBuilder, PanelView, PLC-2, PLC-3, PLC-5,
Rockwell, Rockwell Automation, Rockwell Software, RSLinx, RSLogix,
RSNetWorx, RSView, SLC, Studio 5000, VersaView, and XM are
trademarks of Rockwell Automation, Inc.
Any Rockwell Automation software or hardware not mentioned here is also a
trademark, registered or otherwise, of Rockwell Automation, Inc.
Other Trademarks
ActiveX, Microsoft, Microsoft Access, SQL Server, Visual Basic, Visual
C++, Visual SourceSafe, Windows, Windows ME, Windows NT, Windows
2000, Windows Server, Windows 8.1, Windows 8, Windows 7, and
Windows XP are either registered trademarks or trademarks of Microsoft
Corporation in the United States and other countries.
Adobe, Acrobat, and Reader are either registered trademarks or trademarks
of Adobe Systems Incorporated in the United States and other countries.
Oracle is a registered trademarks of Oracle Corporation.
ControlNet is a registered trademark of ControlNet International.
DeviceNet is a trademark of the Open DeviceNet Vendor Association, Inc.
(ODVA).
Ethernet is a registered trademark of Digital Equipment Corporation, Intel,
and Xerox Corporation.
OLE for Process Control (OPC) is a registered trademark of the OPC
Foundation.
8
Preface
All other trademarks are the property of their respective holders and are
hereby acknowledged.
Warranty
This product is warranted in accordance with the product license. The
products performance may be affected by system configuration, the
application being performed, operator control, maintenance, and other related
factors. Rockwell Automation is not responsible for these intervening factors.
The instructions in this document do not cover all the details or variations in
the equipment, procedure, or process described, nor do they provide
directions for meeting every possible contingency during installation,
operation, or maintenance. This products implementation may vary among
users.
This document is current as of the time of release of the product; however,
the accompanying software may have changed since the release. Rockwell
Automation, Inc. reserves the right to change any information contained in
this document or the software at any time without prior notice. It is your
responsibility to obtain the most current information available from Rockwell
when installing or using this product.
Environmental compliance
Rockwell Automation maintains current product environmental information
on its website at
http://www.rockwellautomation.com/rockwellautomation/about-us/sustainabi
lity-ethics/product-environmental-compliance.page
http://www.rockwellautomation.com/rockwellautomation/about-us/sustainabi
lity-ethics/product-environmental-compliance.page
Contact Rockwell
Customer Support Telephone 1.440.646.3434
Online Support http://www.rockwellautomation.com/support/
http://www.rockwellautomation.com/support/
Preface
10
Chapter 1
What is FactoryTalk
View Machine
Edition?
The FactoryTalk
View software
11
Chapter 1
applications, and includes software for testing the applications you create.
Use the editors to create applications that are as simple or as complex as you
need.
FactoryTalk
Services Platform
12
Chapter 1
FactoryTalk Diagnostics
FactoryTalk Diagnostics collects and provides access to activity, status,
warning, and error messages generated throughout a FactoryTalk system.
FactoryTalk Activation
Some products require activation using FactoryTalk Activation Manager.
Even if you previously used a different method of activation, all FactoryTalk
8.10.00 software must be activated using FactoryTalk Activation Manager.
Connectivity
How you plan to obtain data for an application will determine which
communications software you install.
You can use the RSLinx Enterprise or RSLinx Classic software shipped with
FactoryTalk View ME or use other software and devices that support OPC (
OLE for Process Control) communications.
Note: RSLinx Enterprise is automatically installed for FactoryTalk
View applications. You can use the RSLinx software shipped
with FactoryTalk View ME, or use other software and devices
that support OPC communications.
RSLinx Enterprise
RSLinx Enterprise is a communication server built around FactoryTalk
technology to assist in developing and running your FactoryTalk View
Machine Edition applications.
For communications with Allen-Bradley local and remote devices,
particularly with Logix5000 controllers, RSLinx Enterprise is the
recommended data communications software for FactoryTalk View
applications.
13
Chapter 1
RSLinx Classic
RSLinx Classic is software that provides communications to a wide range of
devices, such as Logix5000 processors. RSLinx Classic is an OPC Data
Access v2.05a-compliant data server that can serve FactoryTalk Live Data
tags from an HMI Tag database or RSLinx Enterprise. RSLinx Classic is
available for personal computers only.
For example, you can install and use RSLinx Classic to serve data through
DH+ (Data Highway +) networks, to support complex bridging and routing,
and to support unsolicited messaging from a controller to RSLinx.
FactoryTalk View
installation DVD
The FactoryTalk View installation DVD provides all the software you need
to develop and run local applications confined to a single computer, or
distributed control systems that involve several computers, connected over a
network.
Depending on needs, the architecture of a FactoryTalk View application
represent different parts of your plant or process. To accommodate those
requirements, these FactoryTalk View programs are included in this Setup
Wizard:
Contact Rockwell
Automation
Technical Support
Telephone: 1-440-646-3434
Online: http://www.rockwellautomation.com/support
Support staff are available Monday to Friday from 8:00 a.m. through 5:00
p.m. local time (North America only), except on statutory holidays.
14
Chapter 1
The products serial number and product key, which are printed on the
Activation Certificate enclosed with the product software DVD
A description of what happened and what you were doing when the
problem occurred
15
Chapter 2
System
requirements
System requirements
Operating system.
Note: FactoryTalk View Studio is tested and supported on operating
systems installed from original Microsoft media only. For
operating systems installed by the computer vendor, see
Knowledgebase article 26842.
Operating System
32-bit
64-bit
Windows 8 Professional
17
Chapter 2
Windows 7 Professional
RSNetworx
compatibility
requirements
To download RSNetWorx
1. Click the Download Software Updates link and enter your Rockwell
Automation Member identification.
2. Enter your Company Name and the Software Serial Number for your
current RSNetWorx.
3. Follow the instructions to download and install the updated software
product.
If you are not under a current technical support contract, you may purchase
an update for RSNetWorx by contacting Rockwell Automation sales.
Note: RSNetWorx v21.00 or later is also available in Studio 5000
Professional v21.00 or later.
Overview of tasks
The checklist in this section summarizes the basic tasks involved in installing
FactoryTalk View Machine Edition along with supporting software. The
FactoryTalk View Setup Wizard automatically determines which
applications and tools should be included.
If you are planning to upgrade your operating system from an earlier version
to Windows XP Professional, see Answer ID 29104 (previously Tech Note
#P88739858) for information about how to perform the upgrade. If you do
18
Chapter 2
not follow the recommended procedure, you will no longer be able to create
or use FactoryTalk View applications.
Ensure that the user installing the software has administrative rights in
Windows.
Locate the serial numbers for all the products you will be installing or
updating. Serial numbers are generally on the original packaging of the
installation media.
19
Chapter 2
2. In the Automatic Updates tab, select the option, Turn off Automatic
Updates.
Install FactoryTalk
View software
20
Chapter 2
3. Adobe Reader will be installed unless you clear the check box. Adobe
Reader is required to open the Installation Guide, User Guide, and
other documents.
4. After you make the selection from the list, the Setup Wizard will
automatically offer different choices for the software products to
install. Make your choices and click Next. The applications you have
selected will determine the sequence of installation.
5. Follow the prompts for the application you have selected. The general
order of the installation will be:
21
Chapter 2
In the dialog box that prompts you to Please select Software Products to
Install, there may be three different options shown:
22
Chapter 2
Optional (clear check box) indicates software that you may wish to
include depending on your system. Select the box to include the
software during installation.The software product selection dialog
boxes for each of the FactoryTalk View ME applications appear below
and indicate which software products can be selected.
Clicking on any of the applications shows its status in the right window.
Status messages may include that it will be installed, and whether it is
already installed and will be upgraded.
Studio for
ME Station
Machine Edition
Stand-alone
ME Transfer
Utility
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
Mandatory
RSLinx Enterprise
Mandatory
Mandatory
Mandatory
RSLinx Classic
Optional
Optional
Recommended
FactoryTalk Activation
Some products require activation using FactoryTalk Activation Manager.
Even if you previously used a different method of activation, all FactoryTalk
8.10.00 software must be activated using FactoryTalk Activation Manager.
23
Chapter 2
24
Chapter 2
User Name and Organization are optional and not required for installation.
A serial number reveals which edition of FactoryTalk View you purchased.
Valid serial numbers are important to get activation keys and call Technical
Support. If you do not enter a valid serial number, you are still allowed to
proceed with the installation. Serial number information is available from the
product packaging.
Enter the serial registration information and click Next.
License agreement
End-user license agreements (EULA) spell out your rights and
responsibilities.
25
Chapter 2
Some software products may be delivered or made available only after you
agree to the terms and conditions of each of the license agreements.
1. Select an agreement at the top of the dialog box. View and read
carefully.
2. Repeat for each license agreement.
3. When all license agreements have been viewed, click Accept All. If
you click Decline, it will halt the installation process.
26
Chapter 2
File Location
Select the location for Rockwell Automation software. If needed, select the
pull down menu to browse to another drive location.
27
Chapter 2
28
Chapter 2
Click Guidelines in the dialog box to review the requirements for strong
passwords.
Microsoft SQL Server 2008 R2 Express Service Pack 2 (32-bit) will be
installed by default. If you want to install other supported editions, you can
use the batch file Install Compatible SQL.bat to conduct the installation. The
file located in the following directory in the FactoryTalk View Machine
Edition installation media:
D:\Redist\SQLServerEXPR_2008R2SP2
where D:\ is the drive containing the installation DVD.
The command line syntax is as follows:
"Install Compatible SQL.bat" [SQL Server setup.exe path] [product
key] [SA password]
All parameters are required. For more details, see Install SQL Server in
FactoryTalk Machine Edition Release Notes.
Password
Admin
Administrator
sa
sysadmin
29
Chapter 2
Features (usually Demo Applications and Help) are optional. Select the
options you want to install and click Next.
30
Chapter 2
Ready to Install
Once all the selections are made, the Setup Wizard displays the prerequisites
and Rockwell Software that will be installed.
31
Chapter 2
FactoryTalk Diagnostics
Microsoft SQL Server 2008 R2 Express Service Pack 2 for the HMI
tag database
Sentinel LDK
32
Chapter 2
33
Chapter 2
Unattended
installation
If you are using Windows Server 2012 R2, Windows Server 2012,
Windows 8.1, or Windows 8, .NET Framework 3.5 is required. You
need to manually install it first. For detailed instructions, refer to
http://msdn.microsoft.com/en-us/library/hh506443.aspx.
Chapter 2
/AcceptAllLicenseItems
/Product=product_name
[/AdobeReader]
[/UserName=user_name]
[/Organization=organization_name]
[/SqlSaPwd=sql_server_password]
[/SerialNumber=serial_number]
[/ProductKey=product_key]
[/AutoRestart]
For detailed description about each parameter, see Parameters on page
35. You can also type Setup /? in the Command Prompt window, and
press Enter to view the help information of all parameters and
examples.
After you press Enter, the installation process starts with the
parameters you specified.
Note: During the unattended installation, if User Account Control
dialog box shows, click Yes to continue with the installation.
You need administrator rights to complete the unattended
installation.
Parameters
The parameters and values are not case sensitive. If the value includes
spaces, you need to
enclose it in quotation marks (" ").
If your installation package is Personalized Edition, the following parameters
will be
ignored during installation:
/UserName
/Organization
/SerialNumber
/ProductKey
/Q
1. (Required) Specifies whether to use the unattended installation.
35
Chapter 2
2. If omitted, the other parameters will not take effect and the installation
will start with Setup Wizard.
/AcceptAllLicenseItems
1. (Required) Specifies that you read and acknowledge all license
agreements, and agree to continue the unattended installation.
2. If omitted, you cannot continue the installation.
/Product=product_name
1. (Required) Specifies which product will be installed. The value must
be quoted by quotation marks (" "), for example, /Product="Studio
Enterprise".
2. The product name must be the one of following:
/AdobeReader
1. (Optional) Specifies whether to install Adobe Reader.
2. If omitted, Adobe Reader will not be installed.
/UserName=user_name
1. (Optional) Specifies the user name.
/Organization=organization_name
1. (Optional) Specifies the organization name.
/SqlSaPwd=sql_server_password
1. (Optional) Specifies the password for the Microsoft SQL Server SA
(System Administrator) account. The value must meet strong password
policy requirements.
2. The parameter is required when you are installing Studio for Machine
Edition.
/SerialNumber=serial_number
1. (Optional) Specifsies the product serial number.
36
Chapter 2
Examples
The following examples show how to use the commands during the
unattended installation.
Example 1
Setup /Q /AcceptAllLicenseItems /Product="Studio for
Machine Edition" /SqlSaPwd=myPassword@123
/SerialNumber=0123456789 /ProductKey=ABCDE-FGHIJ
/AutoRestart
means:
37
Chapter 2
Example 2
Setup /Q /AcceptAllLicenseItems /Product="Machine
Edition Station for Windows" /AutoRestart
means:
Post-installation
procedures
Once FactoryTalk View Machine Edition has been installed, there may be
final setup steps that must be completed:
38
Chapter 2
In the search results, look for Patch TOCs related to all the products
you installed from the FactoryTalk View installation DVD. If
necessary, conduct additional searches for other newly-installed
applications, including:
RSLinx Enterprise
RSLinx Classic
39
Chapter 2
40
Chapter 2
RSVME.STUDIO
RSVME.500
RSVME.250
RSVME.RUN
RSVME.30
RSVME.15
41
Chapter 2
Installation summary
If you are running on a 32-bit operating system, the Setup Wizard does the
following:
Note: If you are running on a 64-bit operating system, the software
installs via the same path under \Program Files (x86)
directory, not \Program Files.
42
Chapter 2
Adds a folder containing bitmap image files that you can use on
graphic objects. This folder is located in:
43
Chapter 2
Uninstall
FactoryTalk View
Machine Edition
software
44
Chapter 2
45
Chapter 2
46
Chapter 3
PanelView Plus
terminal system
requirements
System requirements
Available Memory
(RAM)
Available Flash
Storage space
Operating
System:
Microsoft
Windows CE
64 MB
32 MB
4.1
256 MB
512 MB
6.0
512 MB
512 MB
6.0
PanelView Plus 7
Standard
512 MB
512 MB
6.0
PanelView Plus 7
Performance
512 MB
1G
6.0
For more information, see the terminals user manuals with the following
publication numbers:
The user manuals include the information about installing, configuring, and
programming a full range of terminals compatible with FactoryTalk View
Machine Edition.
47
Chapter 3
Install FactoryTalk
View ME Station on
PanelView Plus
terminals
Start FactoryTalk
View ME Station on
PanelView Plus
terminals
Run applications on
PanelView Plus
terminals
Use sample
applications on
PanelView Plus
terminals
Before you can run an application on the PanelView Plus 7, PanelView Plus
6, PanelView Plus, PanelView Plus Compact, or PanelView Plus CE
terminal, you must transfer it to the terminal.
For information about transferring applications to the PanelView Plus
terminals and preparing to run them, see Transfer applications to a
PanelView Plus terminal in the FactoryTalk View Machine Edition Users
Guide.
FactoryTalk View Studio for Machine Edition comes with sample
applications that highlight features of the product.The sample applications
are located at this path on the development computer (the computer on which
FactoryTalk View Studio is installed):
48
Chapter 3
49
Chapter 3
11. Select the sample applications .mer file, and then click Load.
12. To replace the terminals current communication configuration with
the applications communication configuration, click Yes. Click No to
keep the terminals current communication configuration.
If you click Yes, the applications RSLinx Enterprise communication
settings replace the settings that were on the terminal. You are warned
that the new settings will overwrite the settings in the System folder.
13. To overwrite the existing settings, click Yes. To retain the existing
settings, click No.
The application name is shown in the Current application field in the
FactoryTalk View ME Station dialog box.
14. To run the application, click Run Application.
Upgrade your
terminal
Create a firmware upgrade card that can be plugged into the terminal
you are using.
50
Chapter 3
51
Chapter 3
52
Chapter 4
Personal computer
system
requirements
System requirements
Operating system.
Note: FactoryTalk View Studio is tested and supported on operating
systems installed from original Microsoft media only. For
operating systems installed by the computer vendor, see
Knowledgebase article 26842.
Operating System
32-bit
64-bit
Windows 8 Professional
Windows 7 Professional
X
53
Chapter 4
Install FactoryTalk
View ME Station on
a personal
computer
Start FactoryTalk
View ME Station on
a personal
computer
Run applications on
a personal
computer
Before you can run an application on the computer, you must transfer the
application .mer file to the computer.
Use sample
applications on a
personal computer
You can also set up FactoryTalk View ME Station to start automatically and
run a particular application when Microsoft Windows starts.
54
Chapter 4
10. Select the sample applications .mer file, and then click Open.
11. To replace the computers current communication configuration with
the applications communication configuration, click Yes. To keep the
current communication configuration, click No.
55
Chapter 4
12. To load the application's system directory, click Yes. To retain the
existing settings, click No.
56
Chapter 4
57
Installation assistance
If you experience a problem within the first 24 hours of installation, review the information that is contained in this manual. You can
contact Customer Support for initial help in getting your product up and running.
United States or Canada
1.440.646.3434
Contact your distributor. You must provide a Customer Support case number (call the
phone number above to obtain one) to your distributor to complete the return process.
Please contact your local Rockwell Automation representative for the return procedure.
Documentation feedback
Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document,
complete the feedback form, publication RA-DU002
http://literature.rockwellautomation.com/idc/groups/literature/documents/du/ra-du002_-en-e.pdf.
Copyright 2015 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.