CATALOG
www.lairdtech.com
ABOUT LAIRD
Laird is a global technology business focused on enabling wireless
communication and smart systems, and providing components and systems that
protect electronics. Laird operates through two divisions, Wireless Systems and
Performance Materials. Wireless Systems solutions include antenna systems,
embedded wireless modules, telematics products and wireless automation and
control solutions. Performance Materials solutions include electromagnetic
interference shielding, thermal management and signal integrity products.
As a leader in the design, supply and support of innovative technology, our
products allow people, organisations, machines and applications to connect
effectively, helping to build a world where smart technology transforms the
way of life. Custom products are supplied to major sectors of the electronics
industry including the handset, telecommunications, IT, automotive, public
safety, consumer, medical, rail, mining and industrial markets. Providing value
and differentiation to our customers though innovation, reliable fulfilment and
speed, Laird PLC is listed and headquartered in London, and employs over 9,000
people in more than 58 facilities located in 18 countries.
.
TABLE OF CONTENTS
EMI INTRODUCTION
EMI SUMMARY
6
Product Selection Guide
6
Introduction
8
Standard Design Shields
9
EZ Peel
11
Rigid Corner
11
ReCovr 12
ReMovl 12
Overview 13
FINGERSTOCK
Product Selection Guide
Introduction
Mounting Methods
Ordering Information
UltraSoft Series
Recyclable Clean Copper
Slot Mount Series
Dual Slot Series
Teardrop Series
Compact PCI Symmetrical Mount
Alternate Slot Series
Variable Slot Mount
Symmetrical (S3) Slotted Shielding
Solid Top (S3) Symmetrical Slotted Shielding
Clip-On Symmetrical Shielding
No Snag Gasket
All-Purpose Series
Clip-On Series
Low Profile Hook-On Gasket
Low Profile Gasket
Large Enclosure Series
Double-Sided Contact Series
Foldover Series
Stainless Steel I/O Shielding
Flexible Low Compression Series
Clip-On Twist Series
Twist Series
Divider Edge Shielding
Card Guide Clip-On
Clip-On Perpendicular Shielding
Clip-On Perpendicular Grounding Strip
Clip-On Longitudinal Grounding Strip
Mini-Longitudinal Grounding Gasket
Longitudinal Grounding Series
Custom Stamping
Contact Strips / Contact Rings
IEEE 1394 Horizontal Connector Gasket
DIN Connector Series
USB Connector
www.lairdtech.com
14
14
15
16
17
18
18
19
21
21
22
22
23
24
25
26
27
28
29
31
31
32
32
33
33
34
34
35
35
36
36
37
37
38
38
39
39
39
39
40
VENT PANELS
48
MaxAir 49
Elecro-Air
50
Electrovent 51
FABRIC-OVER FOAM
52
Product Selection Guide
52
Introduction
54
EcoGreen 56
I/O / Gasket Selection Guide
57
Profile Selection Guide
58
I/O Selection Guide
62
Knitted Conductive Gaskets
65
Visual Part Reference Guide
66
Part Number Cross Reference
67
Ultraflex
68
All Mesh
69
Elastomer Core
70
Electroground EMI Washers
72
Electromesh Tape
75
Conductive Fabric
76
MRI "A" Fabric
77
Conductive Tape
78
105
105
106
109
110
111
112
113
TABLE OF CONTENTS
EMI INTRODUCTION
EMI SUMMARY
6
Product Selection Guide
6
Introduction
8
Standard Design Shields
9
EZ Peel
11
Rigid Corner
11
ReCovr 12
ReMovl 12
Overview 13
FINGERSTOCK
Product Selection Guide
Introduction
Mounting Methods
Ordering Information
UltraSoft Series
Recyclable Clean Copper
Slot Mount Series
Dual Slot Series
Teardrop Series
Compact PCI Symmetrical Mount
Alternate Slot Series
Variable Slot Mount
Symmetrical (S3) Slotted Shielding
Solid Top (S3) Symmetrical Slotted Shielding
Clip-On Symmetrical Shielding
No Snag Gasket
All-Purpose Series
Clip-On Series
Low Profile Hook-On Gasket
Low Profile Gasket
Large Enclosure Series
Double-Sided Contact Series
Foldover Series
Stainless Steel I/O Shielding
Flexible Low Compression Series
Clip-On Twist Series
Twist Series
Divider Edge Shielding
Card Guide Clip-On
Clip-On Perpendicular Shielding
Clip-On Perpendicular Grounding Strip
Clip-On Longitudinal Grounding Strip
Mini-Longitudinal Grounding Gasket
Longitudinal Grounding Series
Custom Stamping
Contact Strips / Contact Rings
IEEE 1394 Horizontal Connector Gasket
DIN Connector Series
USB Connector
www.lairdtech.com
14
14
15
16
17
18
18
19
21
21
22
22
23
24
25
26
27
28
29
31
31
32
32
33
33
34
34
35
35
36
36
37
37
38
38
39
39
39
39
40
VENT PANELS
48
MaxAir 49
Elecro-Air
50
Electrovent 51
FABRIC-OVER FOAM
52
Product Selection Guide
52
Introduction
54
EcoGreen 56
I/O / Gasket Selection Guide
57
Profile Selection Guide
58
I/O Selection Guide
62
Knitted Conductive Gaskets
65
Visual Part Reference Guide
66
Part Number Cross Reference
67
Ultraflex
68
All Mesh
69
Elastomer Core
70
Electroground EMI Washers
72
Electromesh Tape
75
Conductive Fabric
76
MRI "A" Fabric
77
Conductive Tape
78
105
105
106
109
110
111
112
113
EMI ESSENTIALS
EMI INTRODUCTION
Overview of EMC/RFI Issues
The phenomenon of electromagnetic interference (EMI) is familiar to virtually everyone, even if they do not
understand the underlying principles. Most people have witnessed firsthand the effects of interference.
To control EMI, government organizations, such as the FCC, CSA, and EEC, mandate that manufacturers may
not design, produce or sell electronic equipment that jams the public broadcast services. In other instances,
however, EMI can constitute more than a mere nuisance. The military and medical communities, for example,
require trouble-free operation of their electronic equipment in adverse electromagnetic environments since
malfunctions could jeopardize missions and personnel. The European Unions EMC directive also mandates
that the apparatus has an adequate level of intrinsic immunity to electromagnetic disturbance to enable it
to operate as intended.
Design Approaches
There are two approaches that can be used to reduce the emission from the PC board. The first approach is
to operate the circuit at the slowest speeds consistent with the functionality of the system, lay out the PCB
with the smallest possible loop areas (especially the high speed devices), and insert suppression components
such as filters, ferrite beads, and bypass capacitors into the circuit to reduce its bandwidth. These techniques
will result in a desired decrease in the high frequency harmonic amplitudes and circuit bandwidth and a
corresponding undesired decrease in both the operating speed and system reliability. The use of slower
speeds with reduced bandwidth will help to desensitize the circuit to external susceptibility fields.
The second is to use shielding. Shielding is the only non-invasive suppression technique. Since the shielding
is not inserted into the circuit, it does not affect the high frequency operating speed of the system, nor does
it affect the operation of the system should changes be made to the design in the future. In addition,
shielding does not create timing problems and waveform distortion; it does not decrease system reliability;
and it reduces crosstalk. Plus, shielding works for both emission suppression as well as susceptibility
(immunity) problems.
2
Even with the overall advantages of shielding, the most cost-effective approach is to use a combination
of circuit suppression/hardening and shielding.
www.lairdtech.com
Wire Mesh
Tape
Applications
Simple installation
Ideally suited for thin or low-profile
applications
Conductive foil tape with release mask for
painted enclosures
Tin copper cloth and nickel copper cloth
versions provide easy-to-handle alternatives
to foils
Electrical Shielding
Effectiveness
Transfer Impedance (500 MHz)
>85 dB
90 - 105 dB
30 - 45 dB
55 - 65 dB
90 - 100 dB
80 - 115 dB
85 - 95 dB
Surface Resistivity
<0.07 ohms/square
N/A
Volume Resistivity
N/A
N/A
Mechanical
Available Size Range
20 - 75% deflection
20 - 70% deflection
N/A
Compression Force
(based on shape selection)
N/A
Compression Set
N/A
Joint Unevenness
Accommodation
N/A
Compound/Material
Availability
Temperature Range
Available Profiles
Rolls
Mounting Methods
Die-cut shapes
Environmental
Fluid Seal
N/A
N/A
Air/Dust
N/A
Galvanic Compatibility
www.lairdtech.com
www.lairdtech.com
Fingerstock
Board-Level Shields
Applications
Electrical Shielding
80 - 100 dB
Effectiveness
Transfer Impedance (500 MHz)
60 - 70 dB
48 dB
40 - 70 dB
75 - 120 dB
40 - 60 dB
45 - 115 dB
N/A
N/A
N/A
Volume Resistivity
N/A
N/A
N/A
Mechanical
Available Size Range
20 - 80% deflection,
Maximum deflection is dependent on the part
profile
N/A
N/A
Compression Force
(based on shape selection)
N/A
N/A
Compression Set
N/A
N/A
Joint Unevenness
Accommodation
N/A
N/A
Compound/Material
Availability
Temperature Range
N/A
Available Profiles
N/A
Mounting Methods
Environmental
Fluid Seal
None
N/A
Air/Dust
N/A
Galvanic Compatibility
www.lairdtech.com
Form-In-Place
Oriented Wire
Microwave Absorbers
40 - 105 dB
60 - 100 dB
N/A
50 - 70 dB
30 - 75 dB
25 - 60 dB
N/A
70 - 100 dB
40 - 120 dB
30 - 95 dB
N/A
N/A
N/A
N/A
N/A
0.002 - 5 ohm-cm
0.006 ohm-cm
N/A
15 - 20% deflection
10 - 20% deflection
N/A
25 - 100 PSI
(125 - 689 KPa)
N/A
N/A
N/A
D shape bead
Pressure-sensitive adhesive
In limited applications
21 standard variations
www.lairdtech.com
EMI ESSENTIALS
BLS Design
Type / Features
Rigid
Corner
Full Drawn
w/ Flange
Full Drawn
Zero Flange
Improves Flatness
by increasing
torsional rigidity
Similar to Full
Drawn, Tooling
more complex.
Opt
Std
Opt
Opt
Std
Low Height
Option
Std
Opt
N/A
N/A
SINGLE PIECE
Single Piece
TWO PIECE
Traditional
Frame
Cover
ReCovr
N/A
Req'd
N/A
EZ Peel
Std
N/A
Opt
97-2000
N/A
N/A
N/A
N/A
Std
N/A
N/A
N/A
Frame
Cover
BLS MATERIALS
MATRIX
Material Type
CRS, Tin Plated
Description / Specs
1010 / 1008 CRS
Comments
High Permeability Material for low Freq Applications, Very Good Solderability,
Mitigation options for Tin Whisker Growth, Pre-plated, Bare stamped edges
Nickel Silver
CA770, CA752
Stainless Steel
Copper Alloys
Phosphor Bronze, Beryllium Copper, Brass Can be chosen for unique requirements that integrate spring contacts,
Typically Plated for Solderability and/or corrosion resistance
www.lairdtech.com
EMI ESSENTIALS
Unique Product
Features
Mounting Features
SMT
Castellations
Thru Hole
Loc Pins
Interior
Walls
Typical
Material
Thickness
Low Height
(less than 2
mm)
Typical
Length
& Width
Flatness
(Size Dep)
N/A
Std
Opt
Opt
No
0.2
Yes
10- 75 mm
0.08
Opt
Std
Opt
Opt
Opt
0.2
Yes
10- 75 mm
0.08
N/A
N/A
N/A
N/A
N/A
0.15
Yes
10- 75 mm
0.15
N/A
Std
N/A
Opt
No
0.3
No
10-40 mm
0.1
N/A
Std
N/A
Opt
No
0.12
Yes
10-30 mm
0.1
N/A
Std
Opt
Opt
Opt
0.4
No
50-300 mm
0.2
N/A
N/A
N/A
N/A
0.25
0.25
No
50-300 mm
0.2
Cost Position
Best
Applications
Most common BLS solutions
Good
Better
Good
www.lairdtech.com
EMI ESSENTIALS
www.lairdtech.com
EMI ESSENTIALS
PROPERTY
TEST METHOD
RESULT
Co-planarity
LTWI-1119
< 0.10 mm
Solderability
ANSI/JSTD-002
>99%
Solderability
>99%
ANSI/EIA 638
Passes
Appearance
LTIES-125
Passes
Adhesion
ASTM B-571
Passes
LTES-461
Passes
MAXIMUM
OVERALL
LENGTH
in (mm)
MAXIMUM
OVERALL
WIDTH
in (mm)
MAXIMUM
OVERALL
HEIGHT
in (mm)
PARTS
PER REEL
BMI-S-101
.538
(13,66)
.476
(12,10)
.100
(2,54)
1000
BMI-S-102
.650
(16,50)
.650
(16,50)
.142
(3,60)
700
BMI-S-103
1.032
(26,21)
1.032
(26,21)
.200
(5,08)
300
BMI-S-104
1.260
(32,00)
1.260
(32,00)
.236
(6,00)
225
BMI-S-105
1.500
(38,10)
1.000
(25,40)
.236
(6,00)
250
BMI-S-106
1.450
(36,83)
1.326
(33,68)
.200
(5,08)
300
BMI-S-107
1.747
(44,37)
1.747
(44,37)
.384
(9,75)
120
BMI-S-111
1.032
(26,21)
1.032
(26,21)
.079
(2,00)
625
www.lairdtech.com
EMI ESSENTIALS
TWO-PIECE
Reduce Board Damage From Inspection and Repairs
Two-piece board level shields offer users the flexibility to inspect or repair shielded components without having to risk board damage by
removing the entire shield or incur any tooling costs. Covers snap on and off with ease, which makes repair of the component under the
shield quicker and easier and reduces board re-work. Two-piece shields are available unassembled*, and are designed to survive drop,
shock and no-rattle tests.
*Pre-assembly is an option. Consult sales
OVERALL
LENGTH
in (mm)
OVERALL
WIDTH
in (mm)
OVERALL
HEIGHT
in (mm)
BMI-S-201-F
.538
(13,66)
.476
(12,10)
.100
(2,54)
1000
BMI-S-202-F
.650
(16,50)
.650
(16,50)
.142
(3,60)
700
BMI-S-203-F
1.032
(26,21)
1.032
(26,21)
.200
(5,08)
300
BMI-S-204-F
1.260
(32,00)
1.260
(32,00)
.236
(6,00)
225
BMI-S-205-F
1.500
(38,10)
1.000
(25,40)
.236
(6,00)
250
BMI-S-206-F
1.450
(36,83)
1.326
(33,68)
.200
(5,08)
300
BMI-S-207-F
1.747
(44,37)
1.747
(44,37)
.384
(9,75)
120
BMI-S-209-F
1.156
(29,36)
0.728
(18,50)
.275
(7,00)
400
BMI-S-210-F
1.732
(44,02)
1.201
(30,50)
.118
(3,00)
370
BMI-S-230-F
1.500
(38,10)
2.000
(50,80)
.200
(5,08)
250
BMI-S-230-F-R
1.500
(38,10)
2.000
(50,80)
.200
(5,08)
250
BMI-S-305
1.500
(38,10)
1.000
(25,40)
.236
(6,00)
250
PARTS
PER REEL
MATERIAL
THICKNESS
CARRIER TAPE
MATERIAL
6 mm or greater 0,20 mm
0,20 mm
LTIMS-LCB
COVER TAPE
MATERIAL
REEL
DIAMETER
LTIMS-PSA
Plastic
EIA-481
10
www.lairdtech.com
EMI ESSENTIALS
RIGID CORNER
The rigid corner board-level shield incorporates a corner design that optimizes component rigidity for increased part and printed circuit board
(PCB) firmness. As PCB designers are increasingly using thinner substrates, a rigid frame reinforces the assembly, thereby improving overall
ruggedness and performance. The shield has improved solder joint reliability and resistance to solder joint fracture, especially in drop testing
performance with thin PCBs. Several standard Laird EMI style parts including single-piece, two-piece, and multi-compartmental board-level
shields use this new rigid corner design, along with availability in custom sizes as well.
The rigid corner shield is stronger and more robust than traditional formed shields, which results in coplanarity improvement of the solder
castellations. The shield can tolerate more deflection (i.e., more handling) without plastic deformation. Elimination of drawn flange reduces
the space needed on the PCB for shielding trace width by potentially ~0.3 mm, allowing for the shield to be more closely placed on the PCB.
Elimination of draft allows for more undershield space and improved component clearance.
The partially drawn corner is located near the top portion the shield, resulting in improved torsional rigidity with no drawn lip and no draft.
For parts over 2 mm, the corner is both drawn and formed with an interlocking multi-radius corner, which provides superior EMI shielding
effectiveness. The interlocking corner can be meshed and closed in during the forming and drawing process for additional improved rigidity
for parts taller than 2 mm. For parts under 2 mm, the entire corner is drawn without an interlocking corner.
FEATURES
MARKETS
Computing
Telecommunications
Data Transfer and Information
Technology
Automotive
Consumer Electronics
Aerospace / Defense
Medical
Portability
Industrial & Instrumentation
Public Utilities
www.lairdtech.com
11
EMI ESSENTIALS
FEATURES
MARKETS OR APPLICATIONS
Computing
Telecommunications / Datacom
Automotive
Consumer Electronics
SMART Metering
Aerospace / Defense
Medical
Industrial & Instrumentation
REM
SOL
2.36 TYP
.093
X
0.100 [.0039] ALL SURFACES
3.000
2.41 TYP
.118
.095
X
2.550 TYP
.100
CAD MAINTAINED
DRAWING. MANUAL
CHANGES UNAUTHORIZED
3.000 TYP
.118
BMIS-105
3RD AN
PROJEC
DESIGNED
2.200 TYP
.087
CAD MAINTAINED
DRAWING. MANUAL
CHANGES UNAUTHORIZED
UNITS: MM (INCH)
MATERIAL:
1008/1010 CRS
FULL HARD TEMPER
TOLERANCES:
.X = .4
.XX = .2
.XXX = .1
ANGULAR:
X.X = 3.0
X.XX = 1.0
FINISH:
3RD ANGLE
PROJECTION
DESIGNED IN SOLIDWORKS
4
FEATURES
MARKETS
Note: Due to delicate nature of the attachment of the pickup bridge, there will be some risk to the bridge separating during pick and
place operations depending on customer manufacturing processes. Pick and place head depth tolerance (z axis) -.020
www.lairdtech.com
.X = .4
.XX = .2
.XXX = .1
ANGULAR:
X.X = 3.0
X.XX = 1.0
3.000 TYP
.118
The ReMovl feature incorporates the ReCovr attachment mechanism applied to the pickup bridge of a BLS frame to allow for easy,
tool less detachment of the bridge after the frame is soldered to the PCB. Ease of detachment along with reliable and consistent
BMIS-105
separation force will allow for automated detachment.
12
TOLERANCES:
UNITS: MM (INCH)
2.41
.095
R0.9
.033
2.41 TYP
2.550
.095
.100
6.000
.236
REVISIO
DESCRIPTION
INITAL RELEASE
3.000
TYP E
DETAIL
SCALE 10 : 1
.118
X
DETAIL E
SCALE 10 : 1
6.000
.236
2.36 TYP
.093
38.100
1.500
REV.
2.35
.093
25.400
1.000
25.400
1.000
38.100
1.500
5.00 TYP
.197
5.00 TYP
.197
2.70
.106
5.00 TYP
.197
4.05
.159
2.70
.106
BENEFITS
5.00 TYP
.197
4.05
.159
5
REMOVL
THICKNESS:)
0.25 0.020
[.0100 .0008]
PRODUCTION DRAWING
CONTROLLED DOCUMENT
ROHS COMPLAINT: (BASE PART)
PART NUMBER :
BMI-S-305
SCALE: 2:1
YES
EMI ESSENTIALS
www.lairdtech.com
Series 97-2100
THICKNESS
in (mm)
COMMENTS
Pre-plated Tin
Nickel-silver alloys
0.004 to 0.016
(0,102 to 0,406)
No plating required
for SMT
solderability
0.004 to 0.020
(0,100 to 0,510)
13
EMI ESSENTIALS
FINGERSTOCK
PRODUCT SELECTION GUIDE
Application
Type
Enclosure Shielding
Gaskets & Contact
Strips
Continuous Length
(Coil Products)
Tape Mount
Clip-On Mount
Mini-Clip On
Symmetrical
Twist
Contact Strips
Reverse Bend
Contact Strips
Longitudinal
Contacts
Perpendicular /
PCB Edge Contact
Track Mount
Direct to Chassis /
Extrusion Mount
Contact Rings
14
Contact / Grounding
D-Sub
Back Plane
DIN Connector
Gaskets
USB
IEEE 1394
Fiber Optic
GBIC
SFP/XFP
SMT
www.lairdtech.com
Internal Contact
External Contact
Slot Mount
Compact PCI Dot 10
Variable Slot
Mount
Twist Series
Fold Over Series
Low Profile
Low Profile with
Edge Hook
Large Enclosure
Std Contact Strips
Reverse Bend
Contact Strips
Double Sided
Contact Strip
All Purpose
S3 - Solid Top,
Symmetrical,
Slotted
No-Snag
Brass Track with
Rivet Mount
Stainless Track
Stainless Track w/
Integral rivet
EMI ESSENTIALS
FINGERSTOCK
Engineered metal Fingerstock solutions from Laird dates from 1938. Laird specializes in designing miniature parts of thin strip metal in
quantities ranging from thousands of pieces to millions of pieces. With over 3,400 standard parts, Laird probably already has an off-theshelf solution that meets your applications requirements.
When custom designs are needed, Laird engineering staff helps construct efficiencies in performance, cost and manufacturability from
the very beginning stages of the application.
Laird specialized capabilities:
Assembly Heat staking (both hand and automatic)
Heat treating In-house die and fixture manufacturing
Multislide equipment Photoetching
Plating Progressive die stamping
Prototype fabrication Resistance welding
Riveting Secondary fabrication
Wire EDM
15
www.lairdtech.com
EMI ESSENTIALS
FINGERSTOCK
MOUNTING METHODS
UNIVERSAL MOUNTING
A stainless steel mounting track is available for use with our full line of gasketing materials. Its unique design offers a secure mounting option versatile
enough for use with fingerstock, ElectroNit mesh, ElectroSeal elastomers, UltraSoft Knit and fabric-over-foam products.
0.205
(5.207)
PART NUMBER
0095-X996-00
0095-X997-00
0095-X998-00
05
07)
Universal Mount
WIDTH
0.310 (7.874)
0.430 (10.922)
0.600 (15.240)
MATERIAL THICKNESS
A = 0.030 (0.762)
B = 0.045 (1.143)
C = 0.060 (1.524)
D = 0.090 (2.286)
E = 0.150 (3.810)
0.356
(9.042)
MATERIAL
X = THICKNESS
0.205
(5.207)
0.205
(5.207)
0.145
(3.683)
DETAIL A
0.018
(0.457)
0.356
0.356
(9.042)
(9.042)
MATERIAL
X = THICKNESS
MATERIAL
X = THICKNESS
0.145
0.145
(3.683)
(3.683)
0.205
0.205
(5.207)
(5.207)
0.205
0.205
(5.207)
(5.207)
SEE DETAIL A
DETAIL A
DETAIL A
0.018
0.018
(0.457)
(0.457)
W
W
SEE DETAIL A
SEE DETAIL A
0.699
(17.755)
1.500
(38.100)
0.699
0.699
(17.755)
(17.755)
14.898
(378.409)
14.898
14.898
(378.409)
(378.409)
1.500
1.500
(38.100)
(38.100)
Laird shielding devices may be mounted quickly and easily using any of several different
methods. Each installation method is described in the text that follows. However, if you should
run into a unique situation not resolved by any of these methods, give us a call. More than
likely we can provide the exact answer you need.
Rivet Mount
Slot Mount
Sticky Fingers
RIVET MOUNT
Riveting produces a tight, long-lasting installation. Either plastic or metal rivets may be used.
Standard parts are supplied with nonconductive tape. For rough surface
applications, such as flame-sprayed surfaces, 0.010 in. (0.254 mm) thick
nonconductive tape is recommended. Optional conductive tape is also available.
Contact a sales department representative for additional ordering information.
SLOT MOUNT
Slot mounted parts are easily installed using slots where bi-directional movement is required.
Simply install part into one slot and snap it into the second slot or over the edge of the frame.
CLIP-ON MOUNTING
ADHESIVE MOUNTING
Sticky Fingers is an instant, pressure-sensitive adhesive bonding system, ideal for all-purpose
contact strips for metal cabinets and electronic enclosures, and is unaffected by temperatures
from -67 to +250F (-55 to +121C).
Clip-on gaskets hold firmly in place due to their own spring characteristics.
Simply push the strips onto the edge or flange of the door or enclosure.
Also available are clip-on gaskets with either T or D lances.
1. Remove all grease and oily residue with solvent. Smooth the mounting surface with emery
cloth.
Stainless Steel mounting track with PSA (pressure sensitive adhesive) is available
on the Symmetrical Slotted Series and Slot Mount Series.
WELDING
3. Place gasket in correct position. (See mounting methods diagrams A through E.) Press firmly
to ensure a good adhesive bond. Avoid repositioning, which might impair the effectiveness of
the adhesive or may bend or kink the strip.
NOTE: On items where fingers cover the solid portion of the gasket, pressure may be applied
16 by inserting a mandrel in the strip and pressing down. For contact strips with Magnefil insert,
simply press down on the fingers.
www.lairdtech.com
SOLDERING
Solder mounting requires normal low temperature soldering techniques,
including cleaning and fluxing of parts with common copper flux materials.
EMI ESSENTIALS
FINGERSTOCK
ORDERING INFORMATION
Part Number Format
Example:
Stock Item
0097
Finish I.D.
02
Plating Finishes
Finish Designation
Laird
ID
Specifications
Specification Details*
Unplated
Bright Finish
02
Laird Designation
Solderable Unplated
21
Laird Designation
Gold
03
Gold
Gold/Nickel Underplate
10
Silver
Silver (matte)
04
Cadmium**
05
06
Tin Lead**
07
Nickel
Dull Nickel
09
Bright Nickel
19
Sulfamate Nickel
24
Electroless Nickel
Electroless Nickel
18
Tin
08
Bright Tin
17
16
15
Zinc***
Notes:
- Laird standard plating codes are defined according to the above specifications. Any non-standard requirements (different classes or types within a specification)
must be clearly identified on the production prints.
- The plating thickness indicates the thickness measured on the primary out-surface of fingerstock products.
*
Class 1, Grade G in QQ-N-290
** Outsourced process
*** Laird provides RoHS compliant Trivalent Chromate
17
www.lairdtech.com
EMI ESSENTIALS
FINGERSTOCK
ULTRASOFT SERIES
Series UltraSoft fingers have been designed for communications, computers and electronic systems designers concerned with EMI
compliance and lightweight enclosure designs. Available in the same full range of standard configurations, UltraSoft fingers offer
designers greater flexibility and versatility than ever beforepermitting more extensive use of lighter,FOLDOVER
thinnerSERIES
construction materials
Standard No. 97-541
to help cut costs and/or enhance system performance.
UltraSoft No. 98-541
Attenuation (dB)
UltraSoft (98-Series) products are available in the same lengths as the standard
(97-Series) products. Please refer to the appropriate
20
standard product pages for specific information. All UltraSoft products are also
available in your choice of finishes.
0
10K
100K
1M
10M
100M
1G
Frequency (Hz)
FOLDOVER SERIES
1.500
Height (Millimeters)
2.000
2.500
3.000
90
140
80
120
70
100
60
80
60
40
20
140
120
100
80
50
60
40
30
40
20
Load (Kg/linear m)
160
Attenuation (dB)
100
20
10
10K
100K
1M
10M
100M
1G
Frequency (Hz)
0.040
0.050
0.060
0.070
0.080
0.090
0.100
0.110
0.120
Height (Inches)
1.500
Height (Millimeters)
2.000
2.500
100
18
140
90
Recyclable
Clean Copper products meld
80
strong stability and tensile strength
70
with 60high levels of thermal and
electrical
conductivity making it suitable
50
for utilization
in both grounding and
40
30
shielding
applications at a cost that is
20
comparable
with traditional metal EMI
10
shields.
Shielding effectiveness is similar
0
to other0.040copper
0.050 alloys
0.060 with
0.070 values
0.080 over
0.090
Height (Inches)
100 dB shielding effectiveness
readily
achieved.
3.000
www.lairdtech.com
RCC
0077-
0067-
0c77-
0c67-
0097-
0087-
0c97-
0c87-
0078-
0068-
0c78-
0c68-
0098-
0088-
0c98-
0c88-
EMI ESSENTIALS
FINGERSTOCK
SLOT MOUNT SERIES
Laird Slot Mount Series of beryllium copper shielding gaskets is designed for
use in a wide variety of slotted applications. This economical product line is
ideal for both grounding and shielding applications.
Minimal slot fabrication cost
Easy and cost-effective installation since fasteners and adhesives are not
required
77-011
77-011
77-015
77-015
77-018
77-018
77-010
77-010
Chassis covers
Plug-in units
Backplanes
Subrack assemblies
Standard (77-Series) and UltraSoft (78-Series low compression versions)
are also supplied in 25.0 ft. (7.6 m) coils
The Slot Mount Series is available in your choice of finishes, see page 17.
TOP VIEW
TOP VIEW
*N
*N
*O
*O
E
E
D Pitch
D Pitch
Slot
*P
Material
*P
Thickness
Material
Thickness
Slot
Approx. Length
Approx. Length
RIGHT VIEW
RIGHT VIEW
H
H
M
M
C
C
See page 2-2
Q Radius (R)
for dimensions.
Q Radius (R)
See page 2-2
for dimensions.
Slot Mount Series are available with Universal and Tape Track mounting
Slot Mount
are available
with Universal and Tape Track mounting
options,Series
see page
1-9, 1-10.
options, see page 1-9, 1-10.
www.lairdtech.com
19
EMI ESSENTIALS
FINGERSTOCK
SLOT MOUNT SERIES
SERIES
*N
*O
*P
RECOMMENDED
77-010 0.320 0.110 0.004 0.187 0.018 0.085 0.110 0.090 0.260 0.040
(8.128) (2.794) (0.102) (4.750) (0.457) (2.159) (2.794) (2.286) (6.604) (1.016)
E
H
M
*N
*O
*P
Q
LENGTH # OF
77-011 0.600 0.220 RECOMMENDED
0.005 0.282 0.032(R)0.140APPROX.
0.180 FING.
0.140 0.520 0.070
(15.240)
(7.163)
(0.813)
(3.556)0.169
(4.572) (3.556)
(13.208) (1.778)
N/A 0.085
0.110(5.588)
0.090(0.127)
0.260
0.060
0.040
1
77-015
(2.159)0.600
(2.794)0.220
(2.286)0.005
(6.604)N/A
(1.524)N/A
(1.016)
0.140(4.293)
0.180
0.140 0.520 0.070
*N
*O
*P
Q
LENGTH # OF
RECOMMENDED
(R) APPROX. FING.
77-010 0.320 0.110 0.004 0.187 0.018 0.085 0.110 0.090 0.260 0.040 0.020 16.000
86
(8.128) (2.794) (0.102) (4.750) (0.457) (2.159) (2.794) (2.286) (6.604) (1.016) (0.508) (406.400)
SERIES
77-011 0.600 0.220 0.005 0.282 0.032 0.140 0.180 0.140 0.520 0.070 0.040 16.000
(15.240) (5.588) (0.127) (7.163) (0.813) (3.556) (4.572) (3.556) (13.208) (1.778) (1.016) (406.400)
(15.240)
(5.588)
(0.127)
(3.556) 0.356
(4.572)
77-046 0.320 0.110 0.004 0.187 0.018 0.085
0.110
0.090
0.260 0.060 0.040
(8.128) (2.794) (0.102) (4.750) (0.457)
(2.159)
(2.794)
(2.286)
(6.604)N/A(1.524)
77-016
0.320
0.110
0.004
N/A(1.016)
0.085 (9.042)
0.110
(8.128)
(2.794)
(0.102)
(2.159) 0.543
(2.794)
77-047 0.320 0.110 0.004 0.187 0.018 0.085
0.110
0.090
0.260 0.060 0.040
57
N/A
0.250
(6.350)
N/A
0.169
(4.293)
77-017 0.320 0.110 0.004 0.187 0.018 0.085 0.110 0.090 0.260 0.040 0.020
(8.128) (2.794) (0.102) (4.750) (0.457) (2.159) (2.794) (2.286) (6.604) (1.016) (0.508)
0.356
(9.042)
77-018 0.320 0.110 0.004 0.187 0.018 0.085 0.110 0.090 0.260 0.040 0.020
0.543
(8.128) (2.794) (0.102) (4.750) (0.457) (2.159) (2.794) (2.286) (6.604) (1.016) (0.508) (13.792)
77-019 0.320 0.110 0.004 0.187 0.018 0.085 0.110 0.090 0.260 0.040 0.020
0.730
(8.128) (2.794) (0.102) (4.750) (0.457) (2.159) (2.794) (2.286) (6.604) (1.016) (0.508) (18.542)
77-020 0.600 0.220 0.005 0.282 0.032 0.140 0.180 0.140 0.520 0.070 0.040
0.532
(15.240) (5.588) (0.127) (7.163) (0.813) (3.556) (4.572) (3.556) (13.208) (1.778) (1.016) (13.513)
77-021 0.320 0.110 0.004 0.187 0.018 0.085 0.110 0.090 0.260 0.060 0.035 16.000
(8.128) (2.794) (0.102) (4.750) (0.457) (2.159) (2.794) (2.286) (6.604) (1.524) (0.889) (406.400)
86
N/A
0.225
(5.715)
77-024 0.370 0.130 0.004 0.250 0.025 0.085 0.110 0.090 0.300 0.040 0.020
0.475
(9.398) (3.302) (0.102) (6.350) (0.635) (2.159) (2.794) (2.286) (7.620) (1.016) (0.508) (12.065)
77-025 0.370 0.130 0.004 0.250 0.025 0.085 0.110 0.090 0.300 0.040 0.020
0.725
(9.398) (3.302) (0.102) (6.350) (0.635) (2.159) (2.794) (2.286) (7.620) (1.016) (0.508) (18.415)
77-026 0.370 0.130 0.005 0.250 0.025 0.085 0.110 0.090 0.300 0.040 0.020
0.975
(9.398) (3.302) (0.127) (6.350) (0.635) (2.159) (2.794) (2.286) (7.620) (1.016) (0.508) (24.765)
77-027 0.370 0.130 0.005 0.250 0.025 0.085 0.110 0.090 0.300 0.040 0.020
1.225
(9.398) (3.302) (0.127) (6.350) (0.635) (2.159) (2.794) (2.286) (7.620) (1.016) (0.508) (31.115)
77-028 0.370 0.130 0.005 0.250 0.025 0.085 0.110 0.090 0.300 0.040 0.020
1.475
(9.398) (3.302) (0.127) (6.350) (0.635) (2.159) (2.794) (2.286) (7.620) (1.016) (0.508) (37.465)
N/A
0.343
(8.712)
77-030 0.800 0.320 0.004 0.375 0.032 0.200 0.180 0.220 0.720 0.070 0.040
0.718
(20.320) (8.128) (0.102) (9.525) (0.813) (5.080) (4.572) (5.588) (18.288) (1.778) (1.016) (18.237)
77-031 0.800 0.320 0.005 0.375 0.032 0.200 0.180 0.220 0.720 0.070 0.040
1.093
(20.320) (8.128) (0.127) (9.525) (0.813) (5.080) (4.572) (5.588) (18.288) (1.778) (1.016) (27.762)
77-032 0.800 0.320 0.005 0.375 0.032 0.200 0.180 0.220 0.720 0.070 0.040
1.468
(20.320) (8.128) (0.127) (9.525) (0.813) (5.080) (4.572) (5.588) (18.288) (1.778) (1.016) (37.287)
77-035 0.310 0.120 0.003 0.250 0.020 0.090 0.115 0.095 0.250 0.040 0.015
0.480
(7.874) (3.048) (0.076) (6.350) (0.508) (2.286) (2.921) (2.413) (6.350) (1.016) (0.381) (12.192)
77-036 0.310 0.120 0.003 0.250 0.020 0.090 0.115 0.095 0.250 0.040 0.015
0.980
(7.874) (3.048) (0.076) (6.350) (0.508) (2.286) (2.921) (2.413) (6.350) (1.016) (0.381) (24.892)
77-037 0.310 0.120 0.003 0.250 0.020 0.090 0.115 0.095 0.250 0.040 0.015
1.480
(7.874) (3.048) (0.076) (6.350) (0.508) (2.286) (2.921) (2.413) (6.350) (1.016) (0.381) (37.592)
77-038 0.310 0.120 0.003 0.250 0.020 0.090 0.115 0.095 0.250 0.040 0.015
1.980
(7.874) (3.048) (0.076) (6.350) (0.508) (2.286) (2.921) (2.413) (6.350) (1.016) (0.381) (50.292)
N/A
D
N/A
Q
(R)
0.02
(0.508
0.04
(1.01
0.040
(3.556)
(13.208) (1.778) (1.016
2
0.090
0.260 0.040 0.020
(2.286)
(6.604) (1.016) (0.508
3
0.02
(0.508
0.02
(0.508
0.02
(0.508
0.04
(1.01
0.03
(8.128)
(2.794)
(0.102)
(4.750)
(0.457)
(2.159) 1.478
(2.794) (2.286)
(6.604) (1.524) (0.889
77-053 0.320 0.110 0.004 0.187 0.018 0.085
0.110
0.090
0.260
0.060
0.040
8
(8.128) (2.794) (0.102) (4.750) (0.457)
(2.159)
(2.794)
(2.286)
(6.604)N/A(1.524)
77-023
0.370
0.130
0.004
N/A(1.016)
0.085(37.541)
0.110 0.090
0.300 0.040 0.020
(9.398)
(3.302)
(0.102)
(2.159) 1.665
(2.794) (2.286)
(7.620) (1.016) (0.508
77-054 0.320 0.110 0.004 0.187 0.018 0.085
0.110
0.090
0.260 0.060 0.040
9
(9.398)
(3.302)
(0.102)
(6.350)
(0.635)
(2.159) 1.852
(2.794)
77-055 0.320 0.110 0.004 0.187 0.018 0.085
0.110
0.090
0.260
0.060
0.040
(8.128) (2.794) (0.102) (4.750) (0.457)
(2.159)
(2.794)
(2.286)
(6.604)
(1.524)
(1.016)
77-025
0.370
0.130
0.004
0.250
0.025
0.085(47.041)
0.110
(9.398)
(3.302)
(0.102)
(6.350)
(0.635)
(2.159)0.917
(2.794)
77-058 0.320 0.110 0.004 0.187 0.018 0.085
0.110
0.090
0.260
0.040
0.020
(2.286)
(7.620) (1.016) (0.508
1
77-029
0.800
0.320
0.004
N/A(0.635)
0.200 (9.042)
0.180 0.220
0.720 0.070 0.040
(20.320)
(8.128)
(0.102)
(5.080) 0.543
(4.572) (5.588)
(18.288) (1.778) (1.016
77-064 0.320 0.110 0.004 0.187 0.018 0.085
0.110
0.090
0.260 0.048 0.025
3
(8.128) (2.794) (0.102) (4.750) (0.457)
(2.159)
(2.794)
(2.286)
(6.604)
(1.219)
(0.635)
77-030
0.800
0.320
0.004
0.375
0.032
0.200(13.792)
0.180
0.220 0.720 0.070 0.04
(20.320)
(8.128)
(0.102)
(9.525)
(0.813)
(5.080) 0.730
(4.572) (5.588)
(18.288) (1.778) (1.01
77-065 0.320 0.110 0.004 0.187 0.018 0.085
0.110
0.090
0.260
0.048
0.025
4
(8.128) (2.794) (0.102) (4.750) (0.457)
(2.159)
(2.794)
(2.286)
(6.604)
(1.219)
(0.635)
77-031
0.800
0.320
0.005
0.375
0.032
0.200(18.542)
0.180
(20.320)
(8.128)
(0.127)
(9.525)
(0.813)
(5.080)16.000
(4.572)
77-070 0.320 0.110 0.004 0.187 0.018 0.085
0.110
0.090
0.260
0.062
0.035
(8.128) (2.794) (0.102) (4.750) (0.457)
(2.159)
(2.794)
(2.286)
(6.604)
(1.575)
(0.889)
77-032
0.800
0.320
0.005
0.375
0.032
0.200(406.400)
0.180
(20.320)
(9.525)
(0.813)
(5.080)0.340
(4.572)
77-076 0.600 0.220 0.005 N/A
N/A 0.140
0.180(8.128)
0.140(0.127)
0.520
0.070
0.020
(15.240) (5.588) (0.127)
77-035
(3.556)0.310
(4.572)0.120
(3.556)0.003
(13.208)
(1.778)
(0.508)
0.250
0.020
0.090(8.636)
0.115
0.095 0.250 0.040 0.01
(2.413)
(6.350) (1.016) (0.381
7
(7.874)
(3.048)
(0.076)
(6.350)
(0.508)
(2.286)1.291
(2.921)
77-087 0.563 0.110 0.003 0.187 0.018 0.085
0.110
0.090
0.260
0.040
0.020
(14.300) (2.794) (0.076) (4.750) (0.457)
(2.159)
(2.794)
(2.286)
(6.604)
(1.016)
(0.508)
77-036
0.310
0.120
0.003
0.250
0.020
0.090(32.791)
0.115
(7.874)
(3.048)
(0.076)
(6.350)
(0.508)
(2.286)1.478
(2.921)
77-088 0.563 0.110 0.003 0.187 0.018 0.085
0.110
0.090
0.260
0.040
0.020
77-038
0.310
0.120
0.003
0.250
0.020
0.090(20.574)
0.115 0.095
0.250 0.040 0.01
(7.874)
(3.048)
(0.076)
(6.350)
(0.508)
(2.286)0.389
(2.921) (2.413)
(6.350) (1.016) (0.381
77-094 0.358 0.128 0.003 0.202 0.018 0.110
0.100
0.115
0.300
0.030
0.030
2
(9.093) (3.251) (0.076) (5.131) (0.457)
(2.794)
(2.54)0.110
(2.921)
(7.620)N/A
(0.762)N/A(0.762)
77-039
0.280
0.002
0.075 (9.881)
0.110 0.090
0.220 0.040 0.030
(7.112)
(2.794)
(0.051)
(1.905) 1.096
(2.794) (2.286)
(5.588) (1.016) (0.762
77-096 0.600 0.220 0.005 0.282 0.032 0.140
0.180
0.095
0.520 0.040 0.040
4
77-040
0.280
0.110
0.002
0.187
0.018
0.075(27.838)
0.110 0.090
0.220 0.040 0.03
(2.286)
(5.588) (1.016) (0.762
43
(7.112)
(2.794)
(0.051)
(4.750)
(0.457)
(1.905)16.000
(2.794)
77-097 0.600 0.220 0.005 0.375 0.032 0.140
0.180
0.140
0.520
0.070
0.040
(15.240) (5.588) (0.127) (9.525) (0.813)
(3.556)
(4.572)
(3.556)
(13.208)
(1.778)
(1.016)
77-041
0.280
0.110
0.002
0.187
0.018
0.075(406.400)
0.110
(7.112)
(4.750)
(0.457)
(1.905)1.378
(2.794)
77-099 0.600 0.220 0.005 0.282 0.032 0.140
0.180(2.794)
0.140(0.051)
0.520
0.070
0.040
0.169
(4.293)
77-040 0.280 0.110 0.002 0.187 0.018 0.075 0.110 0.090 0.220 0.040 0.030
(7.112) (2.794) (0.051) (4.750) (0.457) (1.905) (2.794) (2.286) (5.588) (1.016) (0.762)
0.356
(9.042)
77-041 0.280 0.110 0.002 0.187 0.018 0.075 0.110 0.090 0.220 0.040 0.030
0.543
(7.112) (2.794) (0.051) (4.750) (0.457) (1.905) (2.794) (2.286) (5.588) (1.016) (0.762) (13.792)
0.090
0.220 0.040 0.03
(2.286)
(5.588) (1.016) (0.762
5
(15.240) (5.588) (0.127) (7.163) (0.813)
(3.556)
(4.572)
(3.556)
(13.208)
(1.778)
(1.016)
77-042
0.280
0.110
0.002
0.187
0.018
0.075(35.001)
0.110 0.090
0.220 0.040 0.03
(7.112)
(2.794)
(0.051)
(4.750)
(0.457)
(1.905)1.660
(2.794) (2.286)
(5.588) (1.016) (0.762
77-100 0.600 0.220 0.005 0.375 0.032 0.140
0.180
0.140
0.520
0.070
0.040
6
(15.240) (5.588) (0.127) (9.525) (0.813)
(3.556)
(4.572)
(3.556)
(13.208)
(1.778)
(1.016)
77-044
0.320
0.110
0.004
0.187
0.018
0.085(42.164)
0.110 0.090
0.260 0.040 0.02
77-042 0.280 0.110 0.002 0.187 0.018 0.075 0.110 0.090 0.220 0.040 0.030
0.730
(7.112) (2.794) (0.051) (4.750) (0.457) (1.905) (2.794) (2.286) (5.588) (1.016) (0.762) (18.542)
(8.128)
(2.794)
(0.102)
(4.750)
(0.457)
(2.159)1.942
(2.794) (2.286)
(6.604) (1.016) (0.508
77-101 0.600 0.220 0.005 0.375 0.032 0.140
0.180
0.140
0.520
0.070
0.040
7
(15.240) (5.588) (0.127) (9.525) (0.813)
(3.556)
(4.572) (3.556)
(13.208) (1.778) (1.016) (49.327)
* May
vary depending
upon application.
77-044 0.320 0.110 0.004 0.187 0.018 0.085 0.110 0.090 0.260 0.040 0.020
1.104
(8.128) (2.794) (0.102) (4.750) (0.457) (2.159) (2.794) (2.286) (6.604) (1.016) (0.508) (28.042)
All dimensions
20 shown are in inches (millimeters) unless otherwise specified.
www.lairdtech.com
EMI ESSENTIALS
FINGERSTOCK
DUAL SLOT SERIES
Part No. 77-075, 77-093, 77-110
TOP VIEW
Approx. Length
D
P IT C H
E
H
S L OT
D
E
LENGTH # OF
AP P ROX. F ING.
77-075 0.325 0.100 0.003 0.187 0.018 0.085 0.110 0.090 0.260 0.040
(8.255) (2.54) (0.076) (4.750) (0.457) (2.159) (2.794) (2.286) (6.604) (1.016)
RIGHT VIEW
TOP VIEW
E
A
77-110 0.325 0.125 0.003 0.187 0.018 0.085 0.110 0.090 0.260 0.040 0.020 16.000 86
(8.255) (3.175) (0.076) (4.750) (0.457) (2.159) (2.794) (2.286) (6.604) (1.016) (0.508) (406.400)
TOP VIEW
Approx.
2X Q Length
77-093 0.325 0.140 0.003 0.187 0.018 0.085 0.110 0.090 0.260 0.040 0.020 16.000 86
(8.255) (3.556) (0.076) (4.750) (0.457) (2.159) (2.794) (2.286) (6.604) (1.016) (0.508) (406.400)
77-093 0.325 0.140 0.003 0.187 0.018 0.085 0.110 0.090 0.260 0.040
(8.255) (3.556) (0.076) (4.750) (0.457) (2.159) (2.794) (2.286) (6.604) (1.016)
77-110 0.325 0.125 0.003 0.187 0.018 0.085 0.110 0.090 0.260 0.040
(8.255) #(3.175)
D
E
H
M
N
O
P
Q
LENGTH
OF (0.076) (4.750) (0.457) (2.159) (2.794) (2.286) (6.604) (1.016)
P ITCH S L OT
AP P ROX. F ING.
77-075 0.325 0.100 0.003 0.187 0.018 0.085 0.110 0.090 0.260 0.040 0.020 16.000 86
(8.255) (2.54) (0.076) (4.750) (0.457) (2.159) (2.794) (2.286) (6.604) (1.016) (0.508) (406.400)
SERIES
Approx. Length
B
77-075slot
0.325
0.100 0.003
0.018 0.085 0.110
0.260 of
0.040
0.020 16.000 86
Dual
mount
parts0.187
are available
for a0.090
variety
slotted
(8.255) (2.54) (0.076) (4.750) (0.457) (2.159) (2.794) (2.286) (6.604) (1.016) (0.508) (406.400)
applications. The dual slot feature optimizes the compression
77-093 0.325 0.140 0.003 0.187 0.018 0.085 0.110 0.090 0.260 0.040 0.020 16.000 86
force and
a (4.750)
good(0.457)
operating
range.
is (406.400)
ideal
(8.255)provides
(3.556) (0.076)
(2.159) (2.794)
(2.286) This
(6.604)product
(1.016) (0.508)
0.325
0.125 0.003
0.018 0.085applications.
0.110 0.090 0.260
0.020 16.000 86
for77-110
both
shielding
and0.187
grounding
The0.040
bi-directional
Part No. 77-075, 77-093,
77-110
(0.076) (4.750) (0.457) (2.159) (2.794) (2.286) (6.604) (1.016) (0.508) (406.400)
wiping(8.255)
and (3.175)
compression
action accommodates a wide variety
of designs. Ideal for use in the grounding and shielding
frontSERIES DIMENSIONS
DUALofSLOT
TOP VIEW
panel handles,
sub rack assemblies, plug-in units, back
SERIESplanes
A
B
C
D
E
P ITCH S L OT
and other electronic
Approx. Length enclosure applications.
SERIES
RIGHT VIEW
C
D
E
H
M
N
O
P
Q
LENGTH # OF
P ITCH S L OT
AP P ROX. F ING.
77-075 0.325 0.100 0.003 0.187 0.018 0.085 0.110 0.090 0.260 0.040 0.020 16.000 86
B
(8.255) (2.54) (0.076) (4.750) (0.457) (2.159) (2.794) (2.286) (6.604) (1.016) (0.508) (406.400)
77-093 0.325 0.140 0.003 0.187 0.018 0.085 0.110 0.090 0.260 0.040 0.020 16.000 86
(8.255) (3.556) (0.076) (4.750) (0.457) (2.159) (2.794) (2.286) (6.604) (1.016) (0.508) (406.400)
D
E
77-110 0.325 0.125 0.003 0.187 0.018 0.085 0.110 0.090 0.260 0.040 0.020 16.000 86
M
(8.255)
(3.175) (0.076) (4.750) (0.457)
(2.159) (2.794) (2.286) (6.604) (1.016) (0.508) (406.400)
A
RIGHT VIEW
2X Q
M
C
RIGHT
VIEW
All dimensions shown are in inches (millimeters)
unless
otherwise
specified.
2X Q
TEARDROP SERIES
M
0097-0987
0097-0988
21
www.lairdtech.com
EMI ESSENTIALS
FINGERSTOCK
COMPACT PCI SYMMETRICAL MOUNT
Laird Technologies offers a unique product designed to shield the front panels
offers card
a unique
designed
to shield
the frontcalled
panels
ofLaird
IEEE Technologies
standard 1101.10
cages,product
commonly
referred
to as Dot-10,
of
IEEE
standard
1101.10
card
cages,
commonly
referred
to
as
Dot-10,
called
Compact
PCI
gasket.
Lairdthe
offers
a
unique
product
designed
to
shield
the
front
panels
of
IEEE
standard
Laird Technologies offers a unique product designed to shield the front panels
the
Compact
PCI
gasket.
1101.10
card
cages,
commonly
referred
to
as
Dot-10,
called
the
Compact
of
IEEE
standard
1101.10
card
cages,
commonly
referred
to
as
Dot-10,
called
This front panel shielding has been designed to shield between the front
PCI panels
gasket.
the
PCI
gasket.
ThisCompact
front
panel
shielding
has been
shield between
the front
on sub
racks
and plug-in
units.designed
This is a to
beryllium
copper solid
top
panels
on
sub
racks
and
plug-in
units.
This
is
a
beryllium
copper
solid
top
Thissymmetrical
front
panel
shielding
has
been
designed
to
shield
between
the
front
panels
slotted
fingerstock
strip
pre-plated
in
sulfamate
nickel.
It
is
This front panel shielding has been designed to shield between the front
symmetrical
slotted
fingerstock
pre-plated
in sulfamate
nickel.
It top
is
on sub
racksonand
plug-in
units.
Thisshape
isstrip
a beryllium
solid
top symmetrical
designed
tosub
mount
theplug-in
T
on
a front
panel
extrusion
(see
panels
racksonand
units.
This
iscopper
a beryllium
copper
solidbelow).
designed
to slotted
mount
on
the T
shape
on athis
front
extrusion
below).
slotted
fingerstock
stripforpre-plated
instrip
sulfamate
nickel.
Itsulfamate
is designed
to(see
mount
on
Specially
designed
wiping
applications,
configuration
allows
total
symmetrical
fingerstock
pre-plated
inpanel
nickel.
It is
Specially
designed
for
wiping
applications,
this
configuration
allows
total
the symmetrical
T
shape
on
a
front
panel
extrusion
(see
below).
Specially
designed
for
wiping
compression
action
with
bi-directional
engagement.
designed to mount on the T shape on a front panel extrusion (see below).
symmetrical
compression
action
with
bi-directional
engagement.
applications,
this
configuration
allows
total(241.300)
symmetrical
compression
action
with
Specially
designed
wiping
applications,
this configuration
allows
total
Standard
size
shown
isforbased
on
the
9.5"
length
per the Dot-10
standard.
bi-directional
engagement.
symmetrical
action
with
bi-directional
engagement.
Standard
sizecompression
shown
is based
on the
9.5"
(241.300)
length
per the
Dot-10 standard.
Other
lengths
and
plating
finishes
are
available
for your
specific
application.
Standard
shown
is plating
based on
the 9.5" available
(241.300)forlength
per theapplication.
Dot-10 standard.
Othersize
lengths
and
your specific
Standard
size shown
is basedfinishes
on the are
9.5" (241.300)
length
per the Dot-10
standard.
Other lengths and plating finishes areRIGHT
available
VIEWfor your specific application.
Other lengths and plating finishes are available
for your specific application.
77-077
77-077
77-077
TOP VIEW
TOP VIEW
RIGHT VIEW
RIGHT VIEW
0.191
(4.851)
0.191
(4.851)
TOP VIEW
0.191
(4.851)
52.5
0.0025
(0.063)
0.0025
(0.063)
52.5
0.065
(1.651)
0.065
(1.651)
0.065
(1.651)
0.050
(1.270)
0.050
(1.270)
52.5
R. 0.050
(1.270)
R. 0.050
(1.270)
H
0.012
H (0.305)
0.012
27.0
(0.305)
27.0
0.026
R. 0.050
(0.660)
(1.270)
0.026
(0.660) 0.190
(4.826)
0.190
0.026
(4.826)
(0.660)
0.050
(1.270)
2X 0.053
(1.346)
2X 0.053
(1.346)
27.0
0.0025
(0.063)
0.085 REF.
(2.159)
0.012
(0.305)
2X 0.053
(1.346)
AvailableininUltraSoft
a wide variety
of plating finishes
meet galvanic compatibility
Available
, low compression
seriesto(-078).
requirements.
Available in UltraSoft, low compression series (-078).
Available in UltraSoft, low compression series (-078).
RIGHT VIEW
RIGHT VIEW
RIGHT VIEW
77-098
77-098
2X 0.085
(2.159)
2X 0.085
(2.159)
77-098
2X 0.085
(2.159)
TOP VIEW
TOP VIEW
R 0.020
(0.508)
R 0.020
(0.508)
TOP VIEW
R 0.110
(2.794)
R 0.110
(2.794)
R 0.020
(0.508)
22
All dimensions shown are in inches (millimeters)
0.110
unless
otherwise
(2.794)
specified.
www.lairdtech.com
0.218 TYP
(5.537)
0.218 TYP
(5.537)
R 0.110
(2.794)
0.110
(2.794)
0.110
(2.794)
0.374 (9.500)
Pitch
0.374 (9.500)
Pitch
0.374 (9.500)
Pitch
0.218 TYP
0.320
(5.537)
(8.128)
0.320
(8.128)
0.320
(8.128)
EMI ESSENTIALS
FINGERSTOCK
VARIABLE SLOT MOUNT
Laird introduces Variable Slot Mount shielding, which eliminates the
use of long slots while still utilizing the easy installation method of
slot mount shielding. Fingers are removed from the strip in areas
where a mounting slot is not present. The Variable Slot Mount
shielding strips can be customized to any patterned series of slots.
Easy and cost-effective installation since fasteners and adhesives
are not required
Improved shielding effectiveness compared to traditional slot
mount series through elimination of long slots in host material
Slot mounting feature can be varied to accommodate different
lengths and hole mounting patterns (see figure 2)
Three and five pitch segments ideal for grounding applications
Bi-directional wiping and compression action to accommodate a
wide variety of designs
Available in standard (77-Series) and UltraSoft (78-Series low
compression versions)
Ability to retrofit equipment when higher clock speeds limit current
slot mount product without changing slot size or location
One piece construction eliminates handling individual pieces,
thereby shortening installation time
Ideal for grounding and shielding in the following electronic
enclosure applications:
Front panel handles Chassis covers
Backplanes
Compression/Deflection
Plug-in units Part No: 77-56-02
Subrack
assemblies
(Variable Slot Mount Series)
77-057
77-057
77-066
77-066
77-060
77-056
77-060
50
70
45
Full
Finger
Semi
Finger
Full
Finger
Semi
Finger
50
70
77-056
45
30
60
40
25
35
20
50
77-056
30
15
40
78-056
25
10
20
30
15
20
78-056
10 0
20
40
Deflection (%)
5
0
0
RIGHT VIEW
FRONT VIEW
60
Compression/Deflection
Part No: 77-56-02 (Variable Slot Mount Series)
40
50
35
L oad (poundLsop
inoeuan
rd
fosop
t)er linear foot)
aedr (lp
40
FIGURE
2
Deflection (%)
20
60
60
80
10
80
40
30
20
10
*N
Approx. Length
RIGHT VIEW
FRONT VIEW
FIGURE 2
*N
*O
Approx. Length
*O
E Slot
D Pitch
0.110
0.260 0.040
0.020
16.000
# OF
F ING.
# 86
OF
F
ING.
86
77-057 0.600
0.220 (2.794)
0.005 (0.102)
0.282 (4.750)
0.032(0.457)
0.130(2.159)
0.180
0.140
16.000
57
A (8.128)
(2.794)
(2.286)0.520
(6.604)0.070
(1.016) 0.040
(0.508) (406.400)
A (15.240) (5.588) (0.127) (7.163) (0.813) (3.302) (4.572) (3.556) (13.208) (1.778) (1.016) (406.400)
77-057 0.600 0.220 0.005 0.282 0.032 0.130 0.180 0.140 0.520 0.070 0.040 16.000
57
77-060 0.320
0.110 (5.588)
0.003 (0.127)
0.187 (7.163)
0.018(0.813)
0.085(3.302)
0.110
0.090
16.000
86
A (15.240)
(4.572)
(3.556)0.260
(13.208)0.040
(1.778) 0.020
(1.016) (406.400)
(8.128)
(2.794) (0.076) (4.750) (0.457) (2.159) (2.794) (2.286) (6.604) (1.016) (0.508) (406.400)
77-060 0.320 0.110 0.003 0.187 0.018 0.085 0.110 0.090 0.260 0.040 0.020 16.000
86
E (8.128)
(2.794)
(2.286)0.260
(6.604)0.040
(1.016) 0.020
(0.508) (406.400)
77-061 0.320
0.110 (2.794)
0.003 (0.076)
0.187 (4.750)
0.018(0.457)
0.085(2.159)
0.110
0.090
16.000
86
B (8.128)
(0.457)0.018
(2.159)0.085
(2.794)0.110
(2.286)
(6.604)
77-061 (2.794)
0.320 (0.076)
0.110 (4.750)
0.003 0.187
0.090
0.260(1.016)
0.040(0.508)
0.020 (406.400)
16.000
86
B (8.128)
77-066 0.320
0.110
77-066 (2.794)
0.320
C (8.128)
C
Material Thickness
*P
Material Thickness
*N
*O
*P
Q
LENGTH
VARIABLE SLOT MOUNT DIMENSIONS
REC OMMENDED
( R)
AP P ROX.
SERIES
A
B
C
D
E
H
M
*N
*O
*P
Q
0.320 0.110 0.004 0.187 0.018 0.085 0.110 0.090 0.260 0.040 0.020 LENGTH
16.000
VIEW** (2.794) (0.102) (4.750) (0.457) (2.159) (2.794) (2.286) R(6.604)
EC OMME(1.016)
NDED (0.508)
(R) (406.400)
AP P ROX.
(8.128)
77-056 0.320
*P
E Slot
D Pitch
SERIES
VIEW**
77-056
A
(2.794) (0.076) (4.750) (0.457) (2.159) (2.794) (2.286) (6.604) (1.016) (0.508) (406.400)
0.003 0.187 0.018 0.085 0.110 0.090 0.260 0.040 0.020 16.000
0.110 (4.750)
0.003 0.187
0.090
0.260(1.016)
0.040(0.508)
0.020 (406.400)
16.000
(0.076)
(0.457) 0.018
(2.159)0.085
(2.794)0.110
(2.286)
(6.604)
86
86
(8.128) (2.794) (0.076) (4.750) (0.457) (2.159) (2.794) (2.286) (6.604) (1.016) (0.508) (406.400)
www.lairdtech.com
SERIES A
B
C
D
E
H
M
*N
*O
*P
VIEW**
REC OMMENDED
SERIES
A
B
C
D
E
H
M
*N
*O
*P
Q
77-090 0.600 0.220 0.005 0.282 0.032 0.140 0.180 0.140 0.520 0.070
VI E W
C OMMEN(13.208)
DED
( R)
B** (15.240) (5.588) (0.127) (7.163) (0.813) (3.556) (4.572)RE(3.556)
(1.778)
Q
( R)
LENGTH # OF
AP P ROX. F ING.
57
LENGTH
OF
0.040 #16.000
AP P ROX. (406.400)
F ING.
(1.016)
77-090 0.600 0.220 0.005 0.282 0.032 0.140 0.180 0.140 0.520 0.070 0.040 16.000
57
77-105
0.600 (5.588)
0.220(0.127)
0.005
0.282
0.032
0.070 (406.400)
0.040 16.000
B (15.240)
(7.163)
(0.813)
(3.556)0.140
(4.572)0.180
(3.556) 0.140
(13.208) 0.520
(1.778) (1.016)
(15.240) (5.588) (0.127) (7.163) (0.813) ( 3.556) (4.572) (3.556) (13.208) (1.778) (1.016) (406.400)
57
(15.240) (5.588) (0.127) (7.163) (0.813) ( 3.556) (4.572) (3.556) (13.208) (1.778) (1.016) (406.400)
57
77-105 0.600 0.220 0.005 0.282 0.032 0.140 0.180 0.140 0.520 0.070 0.040 16.000
57
77-106
0.600 (5.588)
0.220(0.127)
0.005
0.282
0.032
0.070 (406.400)
0.040 16.000
C (15.240)
(7.163)
(0.813)
( 3.556)0.140
(4.572)0.180
(3.556) 0.140
(13.208) 0.520
(1.778) (1.016)
77-106 0.600 0.220 0.005 0.282 0.032 0.140 0.180 0.140 0.520 0.070 0.040 16.000
57
D (15.240)
(7.163)
(0.813)
( 3.556)
(4.572)0.180
(3.556) 0.140
(13.208) 0.520
(1.778) (1.016)
77-107
0.600 (5.588)
0.220(0.127)
0.005
0.282
0.032
0.140
0.070 (406.400)
0.040 16.000
E (15.240)
(5.588)0.005
(0.127)0.282
(7.163)
(0.813)
( 3.556)
77-107
0.600 0.220
0.032
0.140
0.180(4.572)
0.140(3.556)
0.520(13.208)
0.070 (1.778)
0.040 (1.016)
16.000 (406.400)
57
(15.240)
(5.588) (0.127)
(0.813) ( 3.556) (4.572) (3.556) (13.208) (1.778) (1.016) (406.400)
* E May
vary depending
upon(7.163)
application.
***May
depending
uponpatterns.
application.
See vary
Figure
1 for finger
** See Figure 1 for finger patterns.
57
23
EMI ESSENTIALS
FINGERSTOCK
SYMMETRICAL (S 3 ) SLOTTED SHIELDING
RIVET MOUNT
97-952
97-951
97-955
97-954
97-958
97-957
A
MIN.
0.620
(15.748)
0.220
(5.588)
0.004
(0.102)
0.375
(9.525)
0.030
(0.762)
0.760
(19.304)
0.100
(2.540)
APPROX.
LENGTH
15.000
(381.000)
97-954
0.450
(11.430)
0.140
(3.556)
0.003
(0.076)
0.250
(6.350)
0.022
(0.559)
0.510
(12.954)
0.070
(1.778)
15.000
(381.000)
97-957
0.350
(8.890)
0.110
(2.794)
0.003
(0.076)
0.187
(4.750)
0.018
(0.457)
0.380
(9.652)
0.055
(1.397)
15.000
(381.000)
97-951
Series 97-951/954/957 are low compression, adhesivemounted beryllium copper shielding strips. Designed as
a continuous band, the strip is slotted to permit spring
contact throughout its length. A wide radius profile creates
the greatest contact for maximum conductivity with minimum compression
requirements. As with all Sticky Fingers shielding strips, a self-adhesive tape
makes mounting easy and secure. All are available in your choice of finishes,
see page 17.
A
B
C
D
E
K
L
APPROX.
M
N
NO. OF
MIN.
LENGTH
RIVETS
0.620
0.220 0.004 0.375 0.030 0.760 0.100 15.000 0.560 0.940
10
(15.748) (5.588) (0.102) (9.525) (0.762) (19.304) (2.540) (381.000) (14.224) (23.876)
97-955
0.450
0.140 0.003 0.250 0.022 0.510 0.070 15.000 0.630 0.880
(11.430) (3.556) (0.076) (6.350) (0.559) (12.954) (1.778) (381.000) (16.002) (22.352)
10
97-958
0.350
(8.890)
10
S3
D
E
A
SERIES
95-901
0.284
(7.214)
0.030
(0.762)
0.325
(8.255)
0.030
(0.762)
0.010
(0.254)
0.068
(1.727)
0.010
(0.254)
0.080
(2.032)
K
A
Smallest
Opening
RIVET SPACING
M
Smallest
Opening
Push Rivet
C
B
24
0.195
(4.953)
C
Double
Adhesive
Tape
95-901-902
D
RATCHET TYPE
97-944
STANDARD
S3 RIVET MOUNT
D
S3 SERIES
95-902
www.lairdtech.com
1.500
(38.100)
CL
Slot
0.285
(7.239)
1.500
(38.100)
EMI ESSENTIALS
FINGERSTOCK
SOLID TOP (S 3 ) SYMMETRICAL SLOTTED
SHIELDING GASKET
Laird offers their Solid Top Symmetrical Slotted Shielding Gaskets.
This product is uniquely designed for those applications where a lid
or cover is closed using a sliding motion to complete the closure.
The solid top design allows the cover to slide either perpendicularly or
parallel to the fingerstock without snagging or damaging the gasket.
Solid top provides an additional 10 dB of shielding effectiveness
Offered in both rivet mount and tape mount versions
Available with two types of rivets
Generous radii provide maximum conductivity with minimum
compression forces
Parts can be modified and/or cut to any specific length
For longitudinal sliding applications, a retention clip is
recommended for secure mounting
Available in standard or UltraSoft (part numbers beginning with
-98) versions
97-910
97-913
97-915
97-916
97-918
97-919
SOLID TOP S3 SERIES - STICKY FINGERS
SERIES
A
MIN.
0.620
(15.748)
0.220
(5.588)
0.004
(0.102)
0.375
(9.525)
0.030
(0.762)
0.760
(19.304)
0.100
(2.540)
APPROX.
L ENGTH
15.000
(381.000)
97-915
0.450
(11.430)
0.140
(3.556)
0.003
(0.076)
0.250
(6.350)
0.022
(0.559)
0.510
(12.954)
0.070
(1.,778)
15.000
(381.000)
97-918
0.350
(8.890)
0.110
(2.794)
0.003
(0.076)
0.187
(4.750)
0.018
(0.457)
0.380
(9.652)
0.070
(1.778)
15.000
(381.000)
97-910
A
B
C
D
E
K
L
APPROX.
M
N
NO. OF
MIN.
L ENGTH
RIVETS
97-913 0.620 0.220 0.004 0.375 0.030 0.760 0.100
15.000 0.560 0.940
10
(15.748) (5.588) (0.102) (9.525) (0.762) (19.304) (2.540) (381.000) (14.224) (23.876)
97-916
10
97-919
10
RETENTION CLIP
PART NO.
97- 964
Us ed On
97- 965
Us ed On
97- 919
97- 916
97- 966
Us ed On
97- 913
D
E
A
Double
Adhesive
Tape
160
140
Rachet Type
Standard
K
A
0.285
(7.239)
0.195
(4.953)
L
Smallest
Opening
Push
Rivet
L
Smallest
Opening
M
Tapered Type
Optional
Attenuation (dB )
120
1.500
(38.100)
100
1.500
(38.100)
80
60
97-919
97-916
97-913
40
20
0
10K
100K
1M
10M
Frequency (Hz)
100M
1G
RETENTION CLIP
25
www.lairdtech.com
EMI ESSENTIALS
FINGERSTOCK
CLIP-ON SYMMETRICAL SHIELDING
The 97-636 and 97-637 Clip-On Symmetrical Shielding Gaskets have
been designed to function equally well in applications requiring sliding
movement or direct compression.
Supplied with standard D lance ensuring secure holding power
when snapped into a prefabricated hole
D lance provides both multi-directional grip and excellent
conductivity
Wide radius profile allows for maximum contact with minimum
compression force
Clip-On feature allows part to be used in high temperature
(above 250F) applications where adhesives will not function
Available in our UltraSoft, 98-Series low force version
Ideally suited for cardcage handles, PC board grounding or any
other application requiring clip-on feature and wiping action
Shielding effectiveness of 100 dB @ 100 MHz
Available in a wide variety of plating finishes, see page 17
97-636
97-637
97-636
97-637
FRONT VIEW
SECTION A-A
0.086 Typ
(2.184)
0.511
(12.979)
0.188 Pitch
(4.775)
0.060
(1.524)
Smallest
Opening
0.025
(0.635)
0.109
(2.769)
0.376 Typ
(9.550)
COMPRESSION VIEW
0.103
(2.616)
0.554
(14.072)
0.070
(1.778)
SIDE VIEW
0.0027 Thk (0.069)
0.032 (0.813)
0.357 (9.068)
16.526 (419.760)
0.018 (0.457)
0.070 (1.778)
0.050 (1.270)
0.104 (2.642)
0.188 Pitch
(4.775)
0.018 Slot
(0.457)
140
120
100
0.088
(2.235)
80
D Lance
0.047 (1.194) Semi-ellipse
X 0.060 (1.524) wide
60
0.376
(9.550)
40
20
0
10K
100K
1M
10M
100M
1G
Frequency (Hz)
26
www.lairdtech.com
EMI ESSENTIALS
FINGERSTOCK
NO SNAG GASKET
Laird
No Snag Series
shielding
gasketsgaskets
offer the
a low
Laird Technologies
No Snag
Series shielding
offerdesigner
the designer
a low
compression,
snag
design.
Provided
withFingers
Sticky Fingers
selfself-adhesive
tape,
compression, nono
snag
design.
Provided
with Sticky
these beryllium
gaskets
provide
easy and
secureprovide
mounting.
adhesive
tape,copper
these shielding
beryllium
copper
shielding
gaskets
Shielding
effectiveness
of > 100 db (77-012) and 80 dB (77-014)
easy
and secure
mounting.
for
a
100
MHz
plane
wave
Shielding effectiveness of > 100 dB (77-012) and 80 dB
Easy,
cost-effective
installation
sincewave
fasteners are not required
(77-014)
for a 100
MHz plane
an all-purposeinstallation
contact strip since
for metal
cabinetsare
andnot
electronic
Ideal
Easy,ascost-effective
fasteners
required
enclosures
Ideal as an all-purpose contact strip for metal cabinets and
Available in a wide variety of plated finishes, see page 1-11
electronic enclosures
Supplied in standard 24.000 in. (609.600 mm) lengths or other specified lengths
Available in a wide variety of plated finishes, see page 17
For load/deflection data, see page 2-33.
Supplied in standard 24.000 in. (609.600 mm) lengths or other
specified lengths
TOP VIEW
E
Slot
D Pitch
Length
H
0.210
(5.334)
M
RADIUS
0.110
(2.794)
APPROX.
LENGTH
24.000
(609.600)
77-012
0.320
(8.128)
0.110
(2.794)
0.002
(0.051)
0.187
(4.750)
0.018
(0.457)
* 77-014
0.600
(15.240)
0.220
(5.588)
0.004
(0.102)
0.375
(9.525)
0.032
(0.813)
0.280
(7.112)
0.180
(4.572)
24.000
(609.600)
77-033
0.370
(9.398)
0.130
(3.302)
0.002
(0.051)
0.250
(6.350)
0.025
(0.635)
0.210
(5.334)
0.110
(2.794)
16.000
(406.400)
* 77-078
0.800
(20.320)
0.320
(8.128)
0.004
(0.102)
0.375
(9.525)
0.032
(0.813)
0.440
(11.176)
0.190
(4.826)
24.000
(609.600)
* 77-079
0.320
(8.128)
0.100
(2.540)
0.035
(0.889)
0.156
(3.962)
0.018
(0.457)
0.210
(5.334)
0.100
(2.540)
16.000
(406.400)
77-081
0.280
(7.112)
0.110
(2.794)
0.002
(0.051)
0.187
(4.750)
0.018
(0.457)
0.180
(4.572)
0.100
(2.540)
24.000
(609.600)
* 77-082
1.100
(27.940)
0.400
(10.160)
0.005
(0.127)
0.500
(12.700)
0.040
(1.016)
0.780
(19.812)
0.420
(10.668)
24.000
(609.600)
* 77-083
0.370
(9.398)
0.130
(3.302)
0.004
(0.102)
0.125
(3.175)
0.025
(0.635)
0.100
(2.540)
0.202
(5.131)
16.000
(406.400)
* 77-084
0.370
(9.398)
0.130
(3.302)
0.004
(0.102)
0.250
(6.350)
0.025
(0.635)
0.100
(2.540)
0.202
(5.131)
16.000
(406.400)
* 77-085
0.600
(15.240)
0.220
(5.588)
0.004
(0.102)
0.375
(9.525)
0.032
(0.813)
0.150
(3.810)
0.295
(7.493)
18.000
(457.200)
* 77-086
0.320
(8.128)
0.090
(2.286)
0.003
(0.762)
0.187
(4.750)
0.018
(0.457)
0.210
(5.334)
0.100
(2.540)
16.000
(406.400)
* 77-091
0.600
(15.240)
0.220
(5.588)
0.004
(0.102)
0.375
(9.525)
0.032
(0.813)
0.780
(19.812)
0.150
(3.810)
18.000
(457.200)
* 77-092
0.600
(15.240)
0.220
(5.588)
0.004
(0.102)
0.187
(4.750)
0.032
(0.813)
0.295
(7.493)
0.150
(3.810)
18.000
(457.200)
SIDE VIEW
77-079/083/084/085/086/091/092
B
Double
Adhesive
Transfer
Tape
Double
Adhesive
Transfer
Tape
M
A
27
www.lairdtech.com
EMI ESSENTIALS
FINGERSTOCK
ALL-PURPOSE SERIES
Right angle
Strips available
Right angle
Strips available
97-537
97-545
97-536
97-537
97-545
97-536
97-538
97-535
97-548
97-538
97-535
97-548
These versatile gaskets are made from highperformance beryllium copper with Sticky Fingers
self-adhesive backing. They provide an extremely
tight, instant bond and are ideal as an all-purpose
contact strip for metal cabinets and electronic
enclosures, particularly where space is critical.
Magnetic field shielding effectiveness of these strips has been proven
to be > 46 dB for a 14 kHz plane wave and 108 dB for a 10 GHz
plane wave. When tested per MIL-STD-285 for electromagnetic
shielding, these strips showed superior performance under minimum
compression. They proved to be especially effective where variations
exist in the space to be shielded and in applications that require high
shielding performance despite frequent opening and closing of the
cabinet.
ALL-PURPOSE SERIES
SERIES
C
B
Tip Touches
Mounting Surface
Double AdhesiveB
Transfer Tape
Tip Touches
Mounting Surface
Double Adhesive
Transfer Tape
CL of Finger
CL of Finger
D
F
D
I
H
I
H
G
K
Mounting
Surface
0.600
A
(15.240)
MIN.
Strips97-540
supplied with
teardrop
97-544
97-520
97-525
97-540
97-544
0.230
B
(5.842)
0.004
C
(0.102)
0.375
D
(9.525)
0.032
E
(0.813)
97-505 0.600
97-500 (15.240)
0.600
(15.240)
97-510 0.600
97-505 (15.240)
0.600
(15.240)
97-520 0.370
97-510 (9.398)
0.600
(15.240)
97-525 0.370
97-520 (9.398)
0.370
(9.398)
97-527 0.280
97-525 (7.112)
0.370
(9.398)
97-535 0.780
97-527 (19.812)
0.280
(7.112)
97-536 0.670
97-535 (17.018)
0.780
(19.812)
97-537 1.130
97-536 (28.702)
0.670
(17.018)
97-538 0.780
97-537 (19.812)
1.130
(28.702)
97-540 0.280
97-538 (7.112)
0.780
(19.812)
97-544 0.260
97-540 (6.604)
0.280
(7.112)
97-545 1.130
97-544 (28.702)
0.260
(6.604)
97-548 0.780
97-545 (19.812)
1.130
(28.702)
0.230
0.230
(5.842)
(5.842)
0.230
0.230
(5.842)
(5.842)
0.140
0.230
(3.556)
(5.842)
0.140
0.140
(3.556)
(3.556)
0.055
0.140
(1.397)
(3.556)
0.250
0.055
(6.350)
(1.397)
0.310
0.250
(7.874)
(6.350)
0.410
0.310
(10.414)
(7.874)
0.250
0.410
(6.350)
(10.414)
0.110
0.250
(2.794)
(6.350)
0.110
0.110
(2.794)
(2.794)
0.410
0.110
(10.414)
(2.794)
0.250
0.410
(6.350)
(10.414)
0.004
0.375
0.032
0.380
0.310
0.004
0.375 (0.813)
0.032 (9.652)
0.380 (7.874)
0.310
(0.102)
(9.525)
(0.102) (9.525) (0.813) (9.652) (7.874)
0.004
0.375
0.032
0.380
0.310
0.004
0.375 (0.813)
0.032 (9.652)
0.380 (7.874)
0.310
(0.102)
(9.525)
(0.102) (9.525) (0.813) (9.652) (7.874)
0.003
0.250
0.022
0.250
0.090
0.004
0.375 (0.559)
0.032 (6.350)
0.380 (2.286)
0.310
(0.076)
(6.350)
(0.102) (9.525) (0.813) (9.652) (7.874)
0.003
0.250
0.022
0.250
0.090
0.003
0.250 (0.559)
0.022 (6.350)
0.250 (2.286)
0.090
(0.076)
(6.350)
(0.076) (6.350) (0.559) (6.350) (2.286)
0.002
0.125
0.025
N/A
N/A
0.003
0.250 (0.635)
0.022
0.250
0.090
(0.051)
(3.175)
0.004
0.375
0.040
0.380
0.380
0.005
0.375 (1.016)
0.040 (9.652)
0.380 (9.652)
0.380
(0.102)
(9.525)
(0.127) (9.525) (1.016) (9.652) (9.652)
0.007
0.500
0.040
0.500
0.560
0.004 (12.700)
0.375
0.040 (12.700)
0.380 (14.224)
0.380
(0.178)
(1.016)
(0.102) (9.525) (1.016) (9.652) (9.652)
0.005
0.375
0.040
0.380
0.380
0.007
0.500 (1.016)
0.040 (9.652)
0.500 (9.652)
0.560
(0.127)
(9.525)
(0.178) (12.700) (1.016) (12.700) (14.224)
0.003
0.188
0.018
0.190
0.080
0.005
0.375 (0.457)
0.040 (4.826)
0.380 (2.032)
0.380
(0.076)
(4.775)
(0.127) (9.525) (1.016) (9.652) (9.652)
0.003
0.188
0.018
0.190
0.080
0.003
0.188 (0.457)
0.018 (4.826)
0.190 (2.032)
0.080
(0.076)
(4.775)
(0.076) (4.775) (0.457) (4.826) (2.032)
0.007
0.500
0.040
0.500
0.560
0.003 (12.700)
0.188
0.018 (12.700)
0.190 (14.224)
0.080
(0.178)
(1.016)
(0.076) (4.775) (0.457) (4.826) (2.032)
0.005
0.375
0.040
0.380
0.380
0.007
0.500 (1.016)
0.040 (9.652)
0.500 (9.652)
0.560
(0.127)
(9.525)
(0.178) (12.700) (1.016) (12.700) (14.224)
N/A
0.500
(12.700)
0.500
N/A
(12.700)
0.310
0.500
(7.874)
(12.700)
N/A
0.310
(7.874)
0.183
N/A
(4.648)
N/A
0.183
(4.648)
0.530
N/A
(13.462)
0.780
0.530
(19.812)
(13.462)
0.530
0.780
(13.462)
(19.812)
0.230
0.530
(5.842)
(13.462)
N/A
0.230
(5.842)
N/A
N/A
0.530
N/A
(13.462)
97-548
0.250
(6.350)
0.005
(0.127)
0.530
0.140
(13.462) (3.556)
97-500
SERIES
97-520
97-525
ALL-PURPOSE SERIES
A
MIN.
97-500
97-505
97-510
97-500
97-505
97-510
Smallest
Opening
Smallest
All dimensions
shown are in inches (millimeters) unless otherwise
specified.
Opening
Mounting
Surface
28
www.lairdtech.com
0.780
(19.812)
0.375
(9.525)
0.040
(1.016)
0.380
0.310
F
G
(9.652) (7.874)
0.380
0.380
(9.652) (9.652)
0.500
0.080
H
I
(12.700) (2.032)
0.080
0.080
(2.032)
(2.032)
0.080
0.080
(2.032)
(2.032)
0.060
0.080
(1.524)
(2.032)
0.060
0.060
(1.524)
(1.524)
N/A
0.060
(1.524)
0.140
N/A
(3.556)
0.140
0.140
(3.556)
(3.556)
0.140
0.140
(3.556)
(3.556)
0.140
0.140
(3.556)
(3.556)
0.060
0.140
(1.524)
(3.556)
0.060
0.060
(1.524)
(1.524)
0.140
0.060
(3.556)
(1.524)
0.140
0.140
(3.556)
(3.556)
N/A
J
0.500
N/A
(12.700)
N/A
0.500
(12.700)
N/A
N/A
0.320
N/A
(8.128)
N/A
0.320
(8.128)
0.480
N/A
(12.192)
N/A
0.480
(12.192)
N/A
N/A
N/A
N/A
N/A
N/A
0.240
N/A
(6.096)
0.750
0.240
(19.050)
(6.096)
N/A
0.750
(19.050)
N/A
APPROX.
LENGTH
0.770
0.040
24.000
K
L
APPROX.
(19.558) (1.016) (609.600)
LENGTH
0.770
0.770
(19.558)
(19.558)
0.770
0.770
(19.558)
(19.558)
0.500
0.770
(12.700)
(19.558)
0.500
0.500
(12.700)
(12.700)
0.300
0.500
(7.620)
(12.700)
0.940
0.300
(23.876)
(7.620)
0.940
0.940
(23.876)
(23.876)
1.940
0.940
(49.276)
(23.876)
0.940
1.940
(23.876)
(49.276)
0.370
0.940
(9.398)
(23.876)
0.370
0.370
(9.398)
(9.398)
1.940
0.370
(49.276)
(9.398)
0.940
1.940
(23.876)
(49.276)
0.040
0.040
(1.016)
(1.016)
0.040
0.040
(1.016)
(1.016)
0.070
0.040
(1.778)
(1.016)
0.070
0.070
(1.778)
(1.778)
0.040
0.070
(1.016)
(1.778)
0.080
0.040
(2.032)
(1.016)
0.140
0.080
(3.556)
(2.032)
0.100
0.140
(2.540)
(3.556)
0.080
0.100
(2.032)
(2.540)
0.065
0.080
(1.651)
(2.032)
0.065
0.065
(1.651)
(1.651)
0.100
0.065
(2.540)
(1.651)
0.080
0.100
(2.032)
(2.540)
24.000
24.000
(609.600)
(609.600)
24.000
24.000
(609.600)
(609.600)
16.000
24.000
(406.400)
(609.600)
16.000
16.000
(406.400)
(406.400)
16.000
16.000
(406.400)
(406.400)
12.000
16.000
(304.800)
(406.400)
24.000
12.000
(609.600)
(304.800)
12.000
24.000
(304.800)
(609.600)
24.000
12.000
(609.600)
(304.800)
16.000
24.000
(406.400)
(609.600)
16.000
16.000
(406.400)
(406.400)
12.000
16.000
(304.800)
(406.400)
24.000
12.000
(609.600)
(304.800)
0.940 0.080
24.000
(23.876) (2.032) (609.600)
APPROX.
COIL
FT (M)
25.0
APPROX.
(7.6)
COIL
FT (M)
25.0
25.0
(7.6)
(7.6)
25.0
25.0
(7.6)
(7.6)
25.0
25.0
(7.6)
(7.6)
25.0
25.0
(7.6)
(7.6)
N/A
25.0
(7.6)
25.0
N/A
(7.6)
25.0
25.0
(7.6)
(7.6)
N/A
25.0
(7.6)
25.0
N/A
(7.6)
25.0
25.0
(7.6)
(7.6)
25.0
25.0
(7.6)
(7.6)
N/A
25.0
(7.6)
25.0
N/A
(7.6)
25.0
(7.6)
EMI ESSENTIALS
FINGERSTOCK
CLIP-ON SERIES
97-618
97-621
97-622
97-623
97-603
97-604
97-605
97-606
97-607
97-603
97-604
97-605
97-606
97-607
97-628
97-629
97-630
97-628
97-629
97-630
97-631
97-632
97-633
97-634
97-610
97-614
97-611
97-613
97-615
97-627
97-612
97-610
97-614
97-611
97-640 97-613
97-615
97-627
97-612
97-645
97-646
97-640
97-645
97-646
97-631
97-632
97-633
97-634
This series from Laird is designed for use where high temperature
or other design considerations preclude the use of adhesive-mounted gasketing. Yet it provides the same shielding characteristics
and effectiveness as on Sticky Fingers mounted series. Clip-On
Gaskets offer shielding effectiveness >100 dB for 100 MHz plane
wave. All are available in your choice of finishes, see page 17.
These 97-Series products are also available in UltraSoft low
compression force 98-Series.
SNAP-TITE WITH D LANCE
This configuration has been designed specifically to provide outstanding holding power. D lances snap into drilled or punched
holes in the mounting surface to create a strong omnidirectional
grip with excellent conductivity.
GRIP-TITE WITH T LANCE
Ideal for use with softer materials, such as aluminum or plated
1
plastic. T lances bite into theVIEW
mounting
surface and preserve
B
electricalHconductivity.
0.100 (2.540)
F
Smallest
Opening
E
C*
E(Inside)
J
0.100 (2.540)
D Lance
Recommended
Hole Size
D LANCE DETAIL
CL of Hole
Radius
97-616
97-650
97-619
97-620
97-624
97-650
VIEW 2
Smallest
Opening
B
H
VIEW 2
Smallest
Opening
C*
All
Others
C*
(Inside)
D
LANCE DETAIL
K
I
0.100
CL of Hole
Radius
VIEW 3
VIEW 3
G
C*
F I
0.050 (1.270)
Semi-ellipse
(2.540)
www.lairdtech.com
*Variations in the
clip-on area are
available. Consult
sales department.
CL
0.100
All dimensions shown are in inches (millimeters)
unless otherwise specified.
C*
0.050 (1.270)
Semi-ellipse
CLIP-ON SERIES
97-610/611/612/613/614/615/616/618/619/620/621/622/623/624
97-627/628/629/630/631/632/633/634/640
CL
(2.540)
CLIP-ON
SERIES
0.080
(2.032)
97-610/611/612/613/614/615/616/618/619/620/621/622/623/624
97-627/628/629/630/631/632/633/634/640
0.080
(2.032)
A
J
VIEW 1
A
B
D H
Smallest
All
Opening
Others
97-616
97-619
97-620
97-624
MINI CLIP-ON
Laird Mini Clip-On (97-645/646) Gaskets are
designed for use on todays thinner, lighter materials.
Lowest compression force available in clip-on configuration
Virtually no compression set 100% recovery of original height
at up to 60% compression
D lance for extra holding power
Optimum conductivity and mechanical properties of
beryllium copper
High cycle life 50,000 cycles without fracture,
wear,
or compression set
D Lance
Recommended
Hole Size
97-618
97-621
97-622
97-623
*Variations in the
clip-on area are
available. Consult
sales department.
C*
29
EMI ESSENTIALS
FINGERSTOCK
CLIP-ON SERIES
CLIP-ON SERIES DIMENSIONS
VIEW
SERIES
97-603
0.380
(9.652)
97-604
NO LANCE SQUARE
LANCE
APPROX.
NL
SQ
LENGTH
0.200
(5.080)
0.100
(2.540)
0.330
(8.382)
0.005
(0.127)
0.250
(6.350)
0.040
(1.016)
0.060
16.000
(1.524) (406.400)
0.250
(6.350)
0.099
(2.515)
0.500
(12.700)
0.330
(8.382)
0.280
(7.112)
0.070
(1.778)
0.380
(9.652)
0.005
(0.127)
0.250
(6.350)
0.040
(1.016)
0.100
16.000
(2.540) (406.400)
0.230
(5.842)
0.204
(5.182)
0.500
(12.700)
97-605
0.380
(9.652)
0.200
(5.080)
0.070
(1.778)
0.380
(9.652)
0.005
(0.127)
0.250
(6.350)
0.040
(1.016)
0.060
16.000
(1.524) (406.400)
0.230
(5.842)
0.204
(5.182)
0.500
(12.700)
97-606
0.380
(9.652)
0.200
(5.080)
0.070
(1.778)
0.380
(9.652)
0.005
(0.127)
0.250
(6.350)
0.040
(1.016)
0.060
16.000
(1.524) (406.400)
0.250
(6.350)
0.161
(4.089)
0.500
(12.700)
97-607
0.330
(8.382)
0.280
(7.112)
0.070
(1.778)
0.380
(9.652)
0.005
(0.127)
0.250
(6.350)
0.040
(1.016)
0.100
16.000
(2.540) (406.400)
0.250
(6.350)
0.161
(4.089)
0.500
(12.700)
97-610
0.300
(7.620)
0.100
(2.540)
0.070
(1.778)
0.190
(4.826)
0.005
(0.127)
0.187
(4.750)
0.047
(1.194)
0.065
16.000
(1.651) (406.400)
97-611
0.300
(7.620)
0.100
(2.540)
0.070
(1.778)
0.190
(4.826)
0.005
(0.127)
0.182
(4.623)
0.047
(1.194)
0.060
16.000
(1.524) (406.400)
0.364
(9.246)
0.062
(1.575)
0.728
(18.491)
97-612
0.440
(11.176)
0.100
(2.540)
0.070
(1.778)
0.190
(4.826)
0.003
(0.076)
0.187
(4.750)
0.047
(1.194)
0.045
16.000
(1.143) (406.400)
0.093
(2.362)
0.050
(1.270)
0.750
(19.050)
97-613
0.300
(7.620)
0.100
(2.540)
0.070
(1.778)
0.190
(4.826)
0.005
(0.127)
0.182
(4.623)
0.047
(1.194)
0.060
16.000
(1.524) (406.400)
0.364
(9.246)
0.054
(1.372)
0.728
(18.491)
97-614
0.300
(7.620)
0.100
(2.540)
0.050
(1.270)
0.190
(4.826)
0.005
(0.127)
0.187
(4.750)
0.047
(1.194)
0.065
16.000
(1.651) (406.400)
97-615
0.297
(7.544)
0.100
(2.540)
0.050
(1.270)
0.187
(4.750)
0.005
(0.127)
0.182
(4.623)
0.047
(1.194)
0.050
16.000
(1.270) (406.400)
0.364
(9.246)
0.309
(7.849)
97-616
0.420
(10.668)
0.120
(3.048)
0.100
(2.540)
0.250
(6.350)
0.005
(0.127)
0.187
(4.750)
0.047
(1.194)
0.095
16.000
(2.413) (406.400)
97-618
0.420
(10.668)
0.140
(3.556)
0.060
(1.524)
0.210
(5.334)
0.005
(0.127)
0.187
(4.750)
0.047
(1.194)
0.080
16.000
(1.778) (406.400)
0.500
(12.700)
0.065
(1.651)
97-619
0.440
(11.176)
0.080
(2.032)
0.050
(1.270)
0.190
(4.826)
0.005
(0.127)
0.187
(4.750)
0.047
(1.194)
0.045
16.000
(1.143) (406.400)
97-620
0.440
(11.176)
0.080
(2.032)
0.070
(1.778)
0.190
(4.826)
0.005
(0.127)
0.187
(4.750)
0.047
(1.194)
0.045
16.000
(1.143) (406.400)
97-621
0.440
(11.176)
0.120
(3.048)
0.070
(1.778)
0.230
(5.842)
0.005
(0.127)
0.193
(4.902)
0.046
(1.168)
0.070
16.000
(1.778) (406.400)
0.652
(16.561)
0.084
(2.134)
1.351
(34.315)
97-622
0.440
(11.176)
0.120
(3.048)
0.070
(1.778)
0.190
(4.826)
0.005
(0.127)
0.193
(4.902)
0.046
(1.168)
0.075
16.000
(1.905) (406.400)
0.290
(7.366)
0.060
(1.524)
0.725
(18.415)
97-623
0.420
(10.668)
0.080
(2.032)
0.070
(1.778)
0.187
(4.750)
0.005
(0.127)
0.187
(4.750)
0.047
(1.194)
0.045
16.000
(1.143) (406.400)
0.530
(13.462)
0.064
(1.626)
1.000
( 25.400)
97-624
0.420
(10.668)
0.140
(3.556)
0.060
(1.524)
0.210
(5.334)
0.005
(0.127)
0.187
(4.750)
0.047
(1.194)
0.080
16.000
(2.032) (406.400)
97-627
0.297
(7.544)
0.099
(2.515)
0.070
(1.778)
0.187
(4.750)
0.005
(0.127)
0.187
(4.750)
0.047
(1.194)
0.049
16.000
(1.245) (406.400)
0.280
(7.112)
0.049
(1.245)
97-628
0.600
(15.240)
0.210
(5.334)
0.100
(2.540)
0.230
(5.842)
0.005
(0.127)
0.187
(4.750)
0.047
(1.194)
0.070
16.000
(1.778) (406.400)
97-629
0.600
(15.240)
0.210
(5.334)
0.050
(1.270)
0.190
(4.826)
0.005
(0.127)
0.187
(4.750)
0.047
(1.194)
0.070
16.000
(1.778) (406.400)
97-630
0.600
(15.240)
0.210
(5.334)
0.070
(1.778)
0.190
(4.826)
0.005
(0.127)
0.187
(4.750)
0.047
(1.194)
0.070
16.000
(1.778) (406.400)
97-631
0.600
(15.240)
0.210
(5.334)
0.070
(1.778)
0.190
(4.826)
0.005
(0.127)
0.182
(4.623)
0.047
(1.194)
0.080
16.000
(2.032) (406.400)
0.364
(9.246)
0.058
(1.473)
0.728
(18.491)
97-632
0.600
(15.240)
0.210
(5.334)
0.070
(1.778)
0.190
(4.826)
0.005
(0.127)
0.182
(4.623)
0.047
(1.194)
0.080
16.000
(2.032) (406.400)
0.364
(9.246)
0.058
(1.473)
0.728
(18.491)
97-633
0.600
(15.240)
0.210
(5.334)
0.050
(1.270)
0.190
(4.826)
0.005
(0.127)
0.182
(4.623)
0.047
(1.194)
0.080
16.000
(2.032) (406.400)
0.364
(9.246)
0.058
(1.473)
0.728
(18.491)
97-634
0.600
(15.240)
0.210
(5.334)
0.050
(1.270)
0.190
(4.826)
0.005
(0.127)
0.182
(4.623)
0.047
(1.194)
0.080
16.000
(2.032) (406.400)
0.364
(9.246)
0.058
(1.473)
0.728
(18.491)
97-640
1.090
0.260
(27.686) (6.604)
0.070
(1.778)
0.280
(7.112)
0.005
(0.127)
0.375
(9.525)
0.040
(1.016)
0.060
16.000
(1.524) (406.400)
97-645
0.210
(5.334)
0.070
(1.778)
0.045
(1.143)
0.250
(6.350)
0.003
(0.076)
0.200
(5.080)
0.030 0.010
24.000
(0.762) (0.254) (609.600)
0.485
(12.319)
0.133
(3.378)
1.000
(25.400)
97-646
0.275
(6.985)
0.080
(2.036)
0.040
(1.016)
0.280
(7.112)
0.006
(0.152)
0.250
(6.350)
0.030
(0.762)
0.500
(12.700)
0.143
(12.700)
1.000
(25.400)
97-650
0.980
0.400
0.200
(24.892) (10.160) (5.080)
0.300
(7.620)
0.004
(0.102)
1.000
0.030 0.200
(25.400) (0.762) (5.080)
0.192
(4.877)
0.120
(3.048)
0.486
(12.344)
0.030
16.000
(0.762) (406.400)
16.000
(406.400)
0.728
(18.491)
1.000
(25.400)
0.748
(19.000)
X Standard
30
www.lairdtech.com
# Optional
EMI ESSENTIALS
FINGERSTOCK
LOW PROFILE HOOK-ON GASKET
77-071/77-072
77-071/77-072
FIGURE 1
77-071/77-072
Shielding Effectiveness Per MIL-STD-285 (Mod.)
77-071/77-072
FIGURE
1
(60% Compression)
Shielding Effectiveness Per MIL-STD-285 (Mod.)
(60% Compression)
130
1201
FIGURE
130 1
FIGURE
110
Shielding
Effectiveness
PerPer
MIL-STD-285
(Mod.)
Shielding
Effectiveness
MIL-STD-285
(Mod.)
(60%
Compression)
(60%
Compression)
120
100
110
130130
90
120100
120
90
11080
110
80
10070
100
70
9060
90
60
8050
80
40
70 50
70
40
6030
60
20
30
50 50
20
4010
40
0
10
30 30
0
20 20
10 10
0 0
77-71
77-72
77-71
77-72
77-71
77-71
77-72
77-72 1000
Frequency (MHz)
1000
Frequency (MHz)
10000
10000
Approximate Length
10010000
Approximate Length
Frequency
(MHz)
Frequency
(MHz)
1001000000
SERIES
C
C
M
M
C C
E E
M M
H
H
D
D
APPROX. NO. OF
APPROX.
OF
LENGTH NO.
FINGERS
LENGTH
77-071
0.450
0.060
0.004
0.125
0.018
0.267
0.200
0.062
16.200 FINGERS
130
SERIES
A
B
C
D
E
H
M
P
APPROX.
NO.
OF
77-071
0.450
0.060
0.004
0.125
0.018
0.267
0.200
0.062
16.200
130
(1.524)
(0.102)
(3.175)
(0.457)
(6.782)
(5.080)
(1.575)
(411.480)
SERIES (11.430)
A
B
C
D
E
H
M
P
APPROX. NO. OF
FINGERS
(11.430) (1.524) (0.102) (3.175) (0.457) (6.782) (5.080) (1.575) LENGTH
(411.480)
LENGTH
FINGERS
77-072 0.450
0.600 0.060
0.090 0.004
0.004 0.125
0.125 0.018
0.018 0.267
0.329 0.200
0.200 0.062
0.062 16.200
16.200
130
77-071
77-071
0.450
0.060
0.004
0.125
0.018
0.267
0.200
0.062
16.200 130130
130
77-072 (15.240)
0.600
0.090
0.004
0.125
0.018
0.329
0.200
0.062
16.200
(2.286)
(0.102)
(3.175)
(0.457)
(8.357)
(5.080)
(1.575)
(411.480)
(11.430)
(11.430)(1.524)
(1.524) (0.102)
(0.102) (3.175)
(3.175) (0.457)
(0.457)(6.782)
(6.782)(5.080)
(5.080)(1.575)
(1.575)(411.480)
(411.480)
(15.240)
(2.286)
(0.102)
(3.175)
(0.457)
(8.357)
(5.080)
(1.575)
(411.480)
77-072
77-072 0.600
0.600 0.090
0.090 0.004
0.004 0.125
0.125 0.018
0.018 0.329
0.329 0.200
0.200 0.062
0.062 16.200
16.200 130130
(15.240)
(15.240)(2.286)
(2.286) (0.102)
(0.102) (3.175)
(3.175) (0.457)
(0.457)(8.357)
(8.357)(5.080)
(5.080)(1.575)
(1.575)(411.480)
(411.480)
SERIES
A
DIMENSIONS
DIMENSIONS
B B
E
E
low
force
version
DIMENSIONS
Available
in in
UltraSoft
(-78)
low
force
version
Available
UltraSoft(-78)
DIMENSIONS
B
B
Approximate
Length
Approximate
Length
A
A
A A
Double
Adhesive
Double
Transfer
Adhesive
Tape
Transfer
Tape
Double
Double
Adhesive
Adhesive
Transfer
Transfer
Tape
Tape
Laird
its line of
lowitsprofile
shielding
fingerstock.
Lairdoffers
Technologies
offers
line ofberyllium
low profilecopper
beryllium
copper shielding
Laird
Technologies
its lineisofaccomplished
lowbyprofile
beryllium
copper
shielding
fingerstock.
Simpleoffers
by one
hooking
one
endgasket
of
Simple
installation
isinstallation
accomplished
hooking
end
of the
onto
fingerstock.
Simple
installation
is accomplished
by hooking
one
endwith
ofsensitive
theedge
gasket
the
edge
of
the
The
other
end
is secured
the
of onto
the
housing.
The
other
end
is secured
with
pressure
Laird
Technologies
offers
itsits
lineline
of housing.
low
profile
beryllium
copper
shielding
Laird
Technologies
offers
of
low
profile
beryllium
copper
shielding
the
gasketsensitive
onto theadhesive
edge of (PSA)
the housing.
The otherrelease
end is liner
secured
with
pressure
with extra-wide
and
adhesive
(PSA)
with
extra-wide
release
linerbyand
designed
with
a teardrop
fingerstock.
Simple
installation
is is
accomplished
hooking
one
end
ofdesigned
fingerstock.
Simple
installation
accomplished
by
hooking
one
end
of
pressure
sensitive
adhesive
(PSA)
with
extra-wide
release
liner
and
designed
with
a
teardrop
feature
to
improve
surface
contact.
Ideally
suited
for
low
thethe
gasket
onto
thethe
edge
of of
the
housing.
TheThe
other
end
is is
secured
with
feature
to
improve
surface
contact.
Ideally
suited
for
low
profile,
bi-digasket
onto
edge
the
housing.
other
end
secured
with
with
a teardrop
feature
to improvesuch
surface
contact.
Ideally suited
for low in
profile,
bi-directional
applications
as the
rack
mounting
of linecards
pressure
sensitive
adhesive
(PSA)
with
extra-wide
release
liner
and
designed
pressure
sensitive
adhesive
(PSA)
with
extra-wide
release
liner
and
designed
rectional
applications
such
as
the
rack
mounting
of
linecards
in
telecomprofile,
bi-directional
applications
such
as
the
rack
mounting
of
linecards
in
telecommunications
equipment.
The
gaskets
offer high
shielding
performance
with
a teardrop
feature
to to
improve
surface
contact.
Ideally
suited
forfor
low
with
a teardrop
feature
improve
surface
contact.
Ideally
suited
low in
munications
equipment.
The
gaskets
offer
highhigh
shielding
performance
telecommunications
equipment.
The
gaskets
offer
shielding
performance
in
applications
where
space
may
be
limited.
profile,
bi-directional
applications
such
asas
thethe
rack
mounting
of of
linecards
in in
profile,
bi-directional
applications
such
rack
mounting
linecards
in
applications
where
spacemay
maybe
be
limited.
applications
where
space
limited.
telecommunications
gaskets
offer
high
shielding
performance
telecommunications
Dual attachmentequipment.
provides
aThe
noThe
snag
gasket
with
secure
retention,
which
equipment.
gaskets
offer
high
shielding
performance
Dual
attachment
provides
amay
no
snag
gasket
withwith
secure
retention,
which
Dual
attachment
provides
aaction
snag
gasket
secure
retention,
inin
applications
where
space
may
beno
limited.
allows
bi-directional
wiping
applications
where
space
be
limited.
allowsallows
bi-directional
wiping action
which
bi-directional
wiping
action
Dual
attachment
provides
a
no
snag
gasket
with
secure
retention,
which
Incorporates
extraprovides
wide release
liner to
facilitate
installation
Dual attachment
a no snag
gasket
with easy
secure
retention, which
Incorporates
extra
wide
release
liner
to facilitate
easy installation
bi-directional
wiping
action
allows
Incorporates
extra
wide
release
to facilitate
installation
allows
bi-directional
wiping
action
Wide
variety
of
plating
finishes
areliner
available
to meet easy
your galvanic
Wide
varietyextra
of
plating
finishes
are
available
to easy
meet
your
galvanic
Incorporates
wide
release
liner
to
facilitate
installation
variety
of
plating
finishes
are
available
to
meet
your galvanic
compatibility
requirements
Wide
Incorporates
extra
wide
release
liner
to
facilitate
easy
installation
compatibility requirements
compatibility
requirements
Wide
variety
of of
plating
finishes
available
to to
meet
your
galvanic
Offered
in standard
lengths
ofare
16.200
in. (411.480
mm)
orgalvanic
cut to your
Wide
variety
plating
finishes
are
available
meet
your
Offered
in
standard
lengths
of of
16.200
in. (411.480
mm) mm)
or cutor
tocut
yourto
compatibility
requirements
desired
length
compatibility
requirements
Offered
in
standard
lengths
16.200
in. (411.480
desired length
Offered
in
standard
lengths
of
16.200
in.
(411.480
mm)
or
cut
to
your
your
desired
lengthlengths
(-78) of
low16.200
force version
Available
UltraSoft
Offered
ininstandard
in. (411.480 mm) or cut to your
(-78) low force version
Available
in UltraSoft
length
desired
length
desired
Available
in UltraSoft (-78) low force version
P
P
P P
B
B
C
C
D
D
E
E
H
H
M
M
P
P
H H
D D
Available
in
a
wide
variety
of
plated
finishes
to
meet
your
galvanic
Available
aforce
wide
variety
of plated
finishes
meet
your galvanic
Low
in in
a wide
variety
of plated
finishes
to meettoyour
galvanic
compression
Available
Low
compression
force
compatibility
needs
compatibility
needs
compatibility
needs
Available
in in
a wide
variety
of plated
finishes to to
meet your galvanic
Available
a wide
variety
Available
in UltraSoft
(-78) of
lowplated
forcefinishes
version meet your galvanic
compatibility
Available
UltraSoft
(-78)(-78)
low force
versionversion
Availableinneeds
in
UltraSoft
low force
compatibility
needs
Offered in standard lengths of 16.000 in. (406.400 mm), or cut to your
Available
standard
lengths
offorce
16.000
in. (406.400
mm), or mm),
cut to or
your
Offeredinin
standard
lengths
of version
16.000
in. (406.400
cut to
UltraSoft
(-78)
low
Offered
Available
in
UltraSoft
(-78)
low
force
version
desired
length
desired
length length
your
desired
Offered
in
standard
lengths
of
16.000
in.
(406.400
mm),
or
cut
to
your
Offered in standard lengths of 16.000 in. (406.400 mm), or cut to your
Laird
Technologies
its line
of low
profile beryllium
copper shielding
77-043
77-043
Laird
offers its lineoffers
of low
profile
beryllium
copper shielding
fingerLaird
Technologies
offers
its line
of low
profile beryllium
copper shielding
fingerstock. The gaskets are provided with pressure sensitive adhesive tape
tape
fingerstock.
The gaskets
are
providedwith
withpressure
pressure sensitive
adhesive
stock.
The
gaskets
are
provided
sensitive
adhesive
Laird
Technologies
offers
its
line
of
low
profile
beryllium
copper
shielding
with
extra wide release
facilitate
secure
placement
and
ease
Lairdan
Technologies
offers
itsliner
lineto
low profile
beryllium
copperand
shielding
LOW
PROFILE
SERIES
with
an
extra
wide
release
liner
tooffacilitate
secure
placement
ease
desired
length
LOW
PROFILE
SERIES
tape
with
an
extra
wide
release
liner
to
facilitate
secure
placement
desired
length
tape
fingerstock.
TheThe
gaskets
areare
provided
with
pressure
sensitive
adhesive
of
application.
tape
fingerstock.
gaskets
provided
with
pressure
sensitive
adhesive
SERIES
A
of
application.
SERIES
A
and
ofwide
application.
with
anease
extra
release
liner
to to
facilitate
secure
placement and
ease
PROFILE
SERIES
an
extra
wide
release
liner
facilitate
secure
easemm) LOW
LOW
PROFILE
SERIES
with
Ideally
suited
for
limited
space
applications
as low
low placement
as 0.060
0.060 in.
in.and
(1.524
Ideally
suited
for
limited
space
applications
as
as
(1.524
mm)
77-043
0.450
of
application.
of Ideally
application.
suited for limited space applications as low as 0.060 in.
SERIES
A0.450
77-043
SERIES
A
(11.430)
Works
well
in
both
compression
and
applications
(11.430)
well
in for
both
compression
and bi-directional
bi-directional
applications
Ideally
suited
for
limited
space
applications
asas
lowlow
asas
0.060
in.in.
(1.524
mm)
(1.524
mm)
Works
Ideally
suited
limited
space
applications
0.060
(1.524
mm)
77-049
0.600
77-043
0.450
77-043
0.450
High
shielding
effectiveness;
average
90dB
from 10
10 kHz
kHz to
to 1GHz
1GHz
77-049
0.600
(11.430)
shielding
effectiveness;
average
90dB
from
(15.240)
Works
well
in in
both
compression
and
bi-directional
applications
Works
well
inboth
both
compression
and
bi-directional
applications
(11.430)
High
Works
well
compression
and
bi-directional
applications
(15.240)
77-049
0.600
77-049
0.600
High
shielding
effectiveness;
average
90dB
from
1010
kHz
to10
1GHz
High
shielding
effectiveness;
average
90
dB
from
kHz to
High
shielding
effectiveness;
average
90dB
from
kHz
to
1GHz
(15.240)
(15.240)
77-043/77-049
Compression Deflection
77-043/77-049
Compression
Deflection
1 GHz
Part #0077-0043-02
Low Profile Gasket
16.000
Part #0077-0043-02
Low Profile Gasket
16.000
16.000
(406.400)
(406.400)
0.125 Pitch (3.175)
0.125 Pitch (3.175)
B
B
0.018
SlotSlot
(0.457)
0.125
Pitch
(3.175)
0.018
(0.457)
0.125
Pitch
(3.175)
C
C
B B
A 0.0035
0.0035
Double Adhesive
A (0.089)
C C
Double Adhesive
(0.089)
Transfer
Tape with
D
Transfer
Tape
with
D
Extra
Wide
Liner
Extra Wide Liner
0.0035
A A 0.0035
Double
Adhesive
(0.089)
Double Adhesive
(0.089)
Transfer
Tape
with
D D
Transfer Tape with
All
unless
otherwise
specified.
Extra
Wide
Liner
Extra
Wide
Liner specified.
All dimensions
dimensions shown
shown are
are in
in inches
inches (millimeters)
(millimeters)
unless
otherwise
All All
dimensions
shown
are are
in inches
(millimeters)
unless
otherwise
specified.
dimensions
shown
in inches
(millimeters)
unless
otherwise
specified.
www.lairdtech.com
Compression
Deflection
Compression
Deflection
60
#0077-0043-02
Profile
Gasket
60 PartPart
#0077-0043-02 LowLow
Profile
Gasket
70 70
50
50
60 60
40
40
50 50
30
30
40 40
20
20
30 30
10
10
20 20
0
0
10
20
30
40
50
10 10 00
10
20
30
40
50
0 0
0 0
10 10
20 20
30 30
40 40
50 50
100
100
70
70
16.000
(406.400)
(406.400)
77-043/77-049
77-043/77-049
80
10080
100
60
80 60
80
40
60 40
60
20
40 20
40
0
20 020
60
60
0 0
60 60
140
140
120
120
100
140100
140
120120
80
80
100100
60
60
80 40
80
40
20
60 20
60
0
40 40
0
20 20
77-043
77-043
B
B
C
C
D
D
0.080
B 0.080
B
(2.032)
(2.032)
0.120
0.080
0.080
0.120
(2.032)
(3.048)
(2.032)
(3.048)
0.120
0.120
(3.048)
(3.048)
0.121
C 0.121
C
(3.073)
(3.073)
0.162
0.121
0.121
0.162
(3.073)
(4.115)
(3.073)
(4.115)
0.162
0.162
(4.115)
(4.115)
0.262
D 0.262
D
(6.665)
(6.665)
0.347
0.262
0.262
0.347
(6.665)
(8.814)
(6.665)
(8.814)
0.347
0.347
(8.814)
(8.814)
Transfer
Impedance
PerPer
SAESAE
ARPARP
1705
Transfer
Impedance
1705
P/NP/N
0077-0043-02
0077-0043-02
25% Compression
25% Compression
25% Compression
10
100
1
10
100
500
700
1
Compression
10 25%100
1
10
100
kHz
kHz
MHz
MHz
MHz 500
MHz 700
MHz 1GHz
kHz
kHz
MHz
MHz
MHz
MHz
MHz GHz
0 0
10 10 100100 1 1 10 10 100100 500500 700700 1 1
kHzkHz kHzkHz MHz
MHz MHz
MHz MHz
MHz MHz
MHz MHz
MHzGHzGHz
31
EMI ESSENTIALS
FINGERSTOCK
LARGE ENCLOSURE SERIES
These standard beryllium copper contact gaskets offer ideal RFI/EMI shielding
These standard beryllium copper contact gaskets offer ideal RFI/EMI
beryllium
copperincontact
gaskets
offer
idealtrailers,
RFI/EMIcomputers
shielding
ofThese
doorsstandard
and movable
components
electronic
shielded
rooms,
doors
and movable
components
electronic
ofshielding
doors
and of
movable
components
in electronic
shieldedinrooms,
trailers,shielded
computers
and
communication
equipment.
These
standard
beryllium
copperand
contact
gaskets offer ideal
RFI/EMI shielding
rooms,
trailers,
computers
communication
equipment.
and
communication
equipment.
They
have
been
scientifically
designed
for wiping
closures,
buttrailers,
are also
usable
of
doors
and
movable
components
in
electronic
shielded
rooms,
computers
These
standard
beryllium
copper
contact
gaskets
offer
ideal
RFI/EMI
shielding
They
have
been
scientifically
designed
for closures,
wiping
butusable
are
have
been
scientifically
designed
for
wiping
but
are also
inThey
compression
applications.
Moreover,
these
contact
stripsclosures,
feature
extremely
and
equipment.
of communication
doors and movable
components in electronic shielded rooms, trailers, computers
usable
in
compression
applications.
Moreover,
these
contact
inalso
compression
applications.
Moreover,
these
contact
strips
feature
extremely
good
endurance
life,
as
well
as
a
high
deflection
range.
In
tests,
attenuation
These
standard
beryllium
copper
contact
gaskets
offer
ideal
RFI/EMI
shielding
andhave
communication
equipment.
They
been
scientifically
for
wiping
closures,
buttests,
are
usable
good
endurance
life,
welldesigned
as a for
high
range.
In
attenuation
up
todoors
112
dB
beenascomponents
measured
a deflection
100
MHz
plane
wave.
Fastening
of
strips
feature
extremely
good
life,
asrooms,
well
as
aalso
high
of
andhas
movable
inendurance
electronic
shielded
trailers,
computers
in
compression
applications.
Moreover,
these
contact
strips
feature
They
have
been
scientifically
designed
for
wiping
closures,
but Fastening
areisextremely
also
usable
updeflection
to
112
dB
has
been
measured
for
a
100
MHz
plane
wave.
of
the
strip
is
usually
accomplished
using
screws
or
rivets.
Soldering
optional.
and communication
equipment.
range.
In
tests,
attenuation
up
to
112
dB
has
been
good
endurance
life,
as well as Moreover,
a high
range.
InSoldering
tests,
attenuation
in strip
compression
applications.
these or
contact
feature
extremely
the
is usually
accomplished
usingdeflection
screws
rivets.ofstrips
is optional.
Both
are
available
in
continuous
lengths
to
a
maximum
25.0
ft.
(7.6
m)
and
measured
for
a
100
MHz
plane
wave.
Fastening
of
the
strip
is
usually
They
have
scientifically
for
wiping
closures,
are also
usable
upgood
to 112
dBbeen
has been
measured
a 100
MHz plane
wave.
Fastening
of
endurance
life, as
well designed
as aforhigh
deflection
range.
Inbuttests,
attenuation
areisavailable
in continuous
lengths
a maximum
ofoptional.
25.0
ft.page
m) and
inBoth
all
standard
finishes,
see pageMoreover,
1-11.
For to
load/deflection
data,
see
2-33.
instrip
compression
applications.
contact
feature
extremely
accomplished
using
or rivets.
Soldering
isstrips
the
usually
accomplished
using
or
rivets.
Soldering
is(7.6
optional.
up
to 112
dB has
beenscrews
measured
forscrews
a these
100
MHz
plane
wave.
Fastening
of
in good
all standard
finishes,
see
page
Fordeflection
load/deflection
see page
2-33.
data,
endurance
life,
asare
well
as1-11.
aavailable
high
In
tests,
attenuation
compression
These
97-Series
products
also
UltraSoft
theare
strip
isavailable
usually
accomplished
using
or range.
Soldering
optional.
Both
are
in
continuous
lengths
to
arivets.
maximum
25.0
ft.
Both
available
in continuous
lengths
toscrews
a inmaximum
oflow
25.0
ft. of
(7.6is
m)
and
up 98-Series.
to97-Series
112 dB has
been measured
for a 100inMHz
plane wave.
Fastening of
lowsee
compression
These
are also
available
UltraSoft
force
in
all
standard
finishes,
see
page
1-11.
For load/deflection
data,
2-33.
(7.6
m)
inproducts
allinaccomplished
standard
finishes,
seea maximum
page
17.
Both
are and
available
continuous
lengths
to
of
25.0 page
ft. is(7.6
m) and
the 98-Series.
strip
is usually
using screws
or rivets.
Soldering
optional.
force
page 2-33.
data, see
in
all
standard
finishes,
see
page
1-11.
For
load/deflection
low compression
products
are also
available
in UltraSoft
These
97-Series
LARGE
ENCLOSURE
SERIES
These
97-Series
products
are
also
available
in
UltraSoft
low
Both are available in continuous lengths to a maximum of 25.0 ft. (7.6 m) and
LARGE
ENCLOSURE
SERIES
force
98-Series.
SERIES
A
B force
C 98-Series.
D alsoE available
H
I compression
L
APPROX.
low
These
97-Series
products
inGUltraSoft
compression
in all
standard
finishes,
seeare
page 1-11. ForF load/deflection
data,
see page
2-33.
REAF.
MIBN
DIA
LAPPROX.
ENGTH
SERIES
C
D
E
F
G
H.
I
L
force 98-Series.
FT.
TheseENCLOSURE
97-Series
LARGE
SERIES are also available in UltraSoft
REF.
MIN products
DIA. low compression
L EN(M)
GTH
97-438
0.250 0.005 0.375 0.040 0.160 0.375 0.140
1.270 0.080 25.000
FT. (M)
force 1.090
98-Series.
SERIES
AENCLOSURE
B
CSERIES
D
E
F
G
H
I
L
APPROX.
LARGE
(6.350)
(0.127)
(32.258)
97-438 (27.686)
0.005 (9.525)
0.375 (1.016)
0.040 (4.064)
0.160 (9.525)
0.375 (3.556)
1.270 (2.032)
0.080 L E(7.6)
25.000
R1.090
EF.
M0.250
IN
D0.140
IA.
NGTH
SERIES (27.686)
A (6.350)
B (0.127)
C (9.525)
D (1.016)
E (4.064)
F (9.525)
G (3.556)
H (32.258)
I (2.032)
L
APPROX.
97-440
1.630
0.410 0.007
0.500 0.040
0.190 0.500
0.140
1.900 0.100
25.000
FT.(7.6)
(M)
LARGE
ENCLOSURE
SERIES
REF.
MIN
DIA.
L ENGTH
(41.402)
(10.414)
(0.178)
(12.700)
(1.016)
(4.826)
(12.700)
(3.556)
(48.260)
(2.540)
(7.6)
97-438
1.090
0.250
0.005
0.375
0.040
0.160
0.375
0.140
1.270
0.080
25.000
97-440
1.630
0.410
0.007
0.500
0.040
0.190
0.500
0.140
1.900
0.100
25.000
FT. (M)
SERIES
A
B
C
D
E
F
G
H
I
L
APPROX.
(27.686)
(41.402)
(10.414)
(0.178) (9.525)
(12.700) (1.016)
(1.016) (4.064)
(4.826) (9.525)
(12.700)(3.556)
(3.556)
(48.260)(2.032)
(2.540) (7.6)
(7.6)
REF.(6.350)
MIN(0.127)
DIA. (32.258)
NGTH
97-438 1.090
0.250
0.005 0.375 0.040 0.160 0.375 0.140
1.270 0.080 L E25.000
FT.
(M)
97-440 1.630
0.100
(27.686)0.410
(6.350)0.007
(0.127)0.500
(9.525)0.040
(1.016)0.190
(4.064)0.500
(9.525)0.140
(3.556)1.900
(32.258)
(2.032)25.000
(7.6)
(41.402)
(10.414)
97-438
1.090
0.250(0.178)
0.005(12.700)
0.375(1.016)
0.040(4.826)
0.160(12.700)
0.375 (3.556)
0.140 (48.260)
1.270 (2.540)
0.080 (7.6)
25.000
97-440 1.630 0.410 0.007 0.500 0.040 0.190 0.500 0.140
1.900 0.100 25.000
(27.686) (6.350) (0.127) (9.525) (1.016) (4.064) (9.525) (3.556) (32.258) (2.032)
(7.6)
(41.402) (10.414) (0.178) (12.700) (1.016) (4.826) (12.700) (3.556) (48.260) (2.540)
(7.6)
97-440 1.630 0.410 0.007 0.500 0.040 0.190 0.500 0.140
1.900 0.100 25.000
(41.402) (10.414) (0.178) (12.700) (1.016) (4.826) (12.700) (3.556) (48.260) (2.540)
(7.6)
KNIFE-EDGE
MOUNT
KNIFE-EDGE
MOUNT
KNIFE-EDGE
MOUNT
KNIFE-EDGE
97-440
97-440
97-438
97-438
97-440
97-438
97-440
97-438
HG
97-438
97-440
MOUNT
KNIFE-EDGE
MOUNT
F
G
G
C
D
D
E
I
FI
C
Smallest
Opening
Smallest
Opening
L
Smallest
L
Opening
Smallest
Opening
Smallest
Opening
L
L
Mechanically balanced strips with high deflection range and long endurance
Mechanically
balanced
withclips
highhold
deflection
rangefirmly
and long
endurance
life-provide
a perfect
fit strips
as spring
the gaskets
in place.
It
life-provide
perfect fitdesign
as spring
hold theofgaskets
firmly
place. It
means
more asimplified
and clips
construction
cabinets
andinenclosures.
Mechanically
balanced
strips
with
high
deflection
range
and
long
Mechanically
strips
with
high
deflection
and measured
longenclosures.
endurance
means more>balanced
simplified
design
and
construction
cabinets
and
Attenuation
102 dB for
a 100
MHz
plane
waveofrange
has
been
using
life-provide
a>
perfect
fitFor
asstrips
spring
clips
hold
the
gaskets
firmly
inload/deflection
place.
Itusing
endurance
life-provide
perfect
fit
as
spring
clips
hold
the
gaskets
Mechanically
balanced
with
high
deflection
range
and
long
endurance
Attenuation
102
dB
for
aa100
MHz
plane
wave
has
been
Series
97-436
gaskets.
standard
finishes,
see
page
1-11.
Formeasured
means
more
simplified
design
and
ofpage
cabinets
and
enclosures.
life-provide
agaskets.
perfect
fitstrips
as
spring
clips
hold
the
gaskets
firmly
in
Itof
firmly
inpage
place.
It means
more
simplified
design
and
construction
Series
97-436
For
standard
finishes,
see
1-11.
For
load/deflection
data,
see
2-33.
These
97-Series
products
are
also
available
in place.
UltraSoft
Mechanically
balanced
withconstruction
high
deflection
range
and
long
endurance
Attenuation
> a102
dB These
for
aas100
MHz
plane
wave
has
been
using
means
simplified
and
construction
of
cabinets
and
enclosures.
data,
seemore
page
2-33.
97-Series
products
aregaskets
also
available
UltraSoft
low
compression
force
98-Series.
life-provide
perfect
fitdesign
spring
clips
hold>
the
firmly
in in
place.
Itplane
cabinets
and
enclosures.
Attenuation
102
dB
for
ameasured
100
MHz
Series
97-436
gaskets.
For
standard
finishes,
seewave
page
1-11.
Forand
load/deflection
Attenuation
>simplified
102
dB
for
a 100
plane
has
been
measured
using
low
compression
force
98-Series.
means
more
design
andMHz
construction
of cabinets
enclosures.
wave
has
been
measured
using
Series
97-436
gaskets.
For
standard
data,
see97-436
page >
2-33.
These
97-Series
products
are page
also
in
UltraSoft
Series
gaskets.
standard
finishes,
see
1-11.
load/deflection
Attenuation
102
dB For
for
a 100 MHz
plane
wave
hasavailable
been For
measured
using
QUICK
SPRING
CLIP
FASTENERS
(97-445)
finishes,
see
page
17.
These
97-Series
products
areavailable
alsofasteners
available
in
low
compression
force
98-Series.
Designed
forpage
usegaskets.
with
Series
97-436
finger
gaskets,
spring
clip
perdata,
see
2-33.
These
97-Series
products
also
in UltraSoft
Series
97-436
ForFASTENERS
standard
finishes,
see are
page
1-11.
For load/deflection
QUICK
SPRING
CLIP
(97-445)
UltraSoft
low
force
98-Series.
Designed
usecompression
with
97-436
finger
spring
clip
fasteners
mit
fullcompression
strip
compression.
Easy97-Series
to
install,
theygaskets,
permit
lifting
of gasket
for perlow
forceSeries
98-Series.
data,
seeforpage
2-33.
These
products
are also
available
in UltraSoft
QUICK
SPRING
CLIP
FASTENERS
(97-445)
mit
fullcompression
strip
compression.
Easy
to install,
they
of gasket
for
cleaning
ofSPRING
contact
surface.
Packaged
in(97-445)
lots
of permit
1,000.lifting
Available
in standard
QUICK
CLIP
FASTENERS
low
force 98-Series.
Designed
for
use with
SeriesFASTENERS
97-436
finger
gaskets,
spring
clip fasteners
percleaning
ofSPRING
contact
surface.
Packaged
in lots
of 1,000.
Available
in standard
finishes,
see
page
1-11.
QUICK
CLIP
(97-445)
Designed
foruse
usewith
with
Series
97-436
finger
gaskets,
spring
clip
mit
full strip
compression.
Easy
to install,
they
permit
lifting
gasket
for perDesigned
for
Series
97-436
finger
gaskets,
springofclip
fasteners
finishes,
seeSPRING
page 1-11.
QUICK
CLIP
FASTENERS
(97-445)
fasteners
permit
full
strip
compression.
Easy
tospring
install,
they
permit
cleaning
contact
Packaged
infinger
lotsthey
ofgaskets,
1,000.
Available
in
standard
97-436
97-436
mit
fullofstrip
compression.
Easy
to install,
permit
liftingclip
of
gasket
forperDesigned
for
use surface.
with
Series
97-436
fasteners
finishes,
page
1-11.
97-436
lifting
ofstrip
for
cleaning
of
contact
surface.
Packaged
in
lots
mit fullsee
compression.
Easy
to
install,
they
permit
lifting
of
gasket
for of 97-436
cleaning
ofgasket
contact
surface.
Packaged
in
lots
of
1,000.
Available
in
standard
Free Position
0.940
cleaningAvailable
of contact
surface.
in lots
1,000.17.
Available in standard
finishes,
see
page 1-11.
1,000.
in(23.876)
standard
finishes,
seeofpage
Free
Position Packaged
97-436
97-436 0.375 Pitch
0.250 Min.
0.940
finishes, see page 1-11.
(6.350)
0.220
(5.588)
0.220
(5.588)
(23.876)
97-436
Free Position
97-436
0.940
Free Position
(23.876)
Free0.940
Position
97-436
End(23.876)
View
0.940
97-436
(23.876)
End View
0.250 Min.
(6.350)
0.250 Min.
(6.350)
0.220
0.250 Min.
0.004
(5.588)
(0.102)(6.350)
0.250 Min.
0.220
0.004
(6.350)
(5.588)
(0.102)
0.220 1.090 97-436
(5.588)(27.686)End View
0.004
1.090
97-436
(0.102)
(27.686) End View
Smallest
97-436
0.004
Opening
End View
(0.102)
Smallest
0.004
1.090
0.060
Opening
(0.102)
(27.686)
(1.524)
0.060
1.090
(1.524) Smallest
(27.686)
1.090
Opening
(27.686)
Smallest
0.060
Opening
(1.524)
Smallest
All dimensions shown are in inches (millimeters)0.060
unless otherwise
Opening specified.
(1.524)
0.060
All dimensions shown are in inches (millimeters)
unless otherwise specified.
(1.524)
32
www.lairdtech.com
97-445
97-445
97-436
97-436
97-445
97-445
97-445
97-436
97-445
97-445
0.250
(6.350)
97-445
0.250
(6.350)
(9.525)
97-4360.375 Pitch
0.015
Slot
(9.525)
97-436 (0.381)
0.015 Slot
0.375
Pitch
(0.381)
(9.525)
0.375 Pitch
0.015 (9.525)
Slot
(0.381)
0.375 Pitch
(9.525)
0.015
Slot
(0.381)
0.015 Slot
(0.381)
0.130
x 0.160 Elongated
(3.302 x 4.064) Holes
0.130 x 0.160 Elongated
(3.302 x 4.064) Holes
0.130 x 0.160 Elongated
(3.302 x 4.064) Holes
0.130 x 0.160 Elongated
(3.302 x 4.064) Holes
0.130 x 0.160 Elongated
(3.302 x 4.064) Holes
97-436
97-436
97-445
0.25097-445
1.060
(26.924)
1.060
(26.924)
(6.350)
0.250
(6.350)
0.250
(6.350)
0.080
(2.032)
0.080
(2.032)
1.060
0.004
(26.924)
(0.102)
1.060 0.080
0.004
(26.924) (2.032)
(0.102)
1.060
0.080
(26.924)
(2.032)
0.080
0.004
(2.032)
(0.102)
0.004
(0.102)
0.004
(0.102)
0.120
(3.048)
0.120
(3.048)
0.120
(3.048)
0.120
(3.048)
0.120
(3.048)
EMI ESSENTIALS
FINGERSTOCK
FOLDOVER SERIES
97-515
97-515
97-521
97-541
97-542
97-515
97-521
Patent No. 3,504,095
Patent
97-541
97-542
Thisversion
versionofofSticky
Sticky
Fingers
beryllium
copper
shielding
This
Fingers
beryllium
copper
shielding
gasketsgaskets
features a
special
U-shaped
end
that
permits
the that
fingerpermits
of the strip
tofinger
slide when
enclosure
features a special U-shaped
end
the
of
the
strip to
This version
of Sticky
Fingers
shielding
gaskets features
doors
are closed.
It also
retainsberyllium
the closed.
stripscopper
fingers
when
enclosure
doorsfingers
area
slide when
enclosure
doors
are
It also
retains
the strips
specialthus
U-shaped
end that
permitsdamage
the finger
of
the
strip toShielding
slide when
enclosure
open,
preventing
accidental
to
the
fingers.
effectiveness
whenare
enclosureItdoors
are open,
thus preventing
damage
also
retains
strips
fingers whenaccidental
enclosure doors
are to
isdoors
>115 dBclosed.
for a 100
MHz
planethe
wave.
the fingers.
Shieldingaccidental
effectiveness
is to
>115
dB forShielding
a 100 MHz
plane wave.
open,
thus preventing
damage
the fingers.
effectiveness
Four models provide you a choice of widths to suit your application. They are
is
>115
dB forprovide
a 100 MHz
wave.of widths to suit your application.
Four
models
youplane
a choice
available in standard 16.000 in. (406.400 mm) lengths, except 97-515 which
They
are available
in.to(406.400
mm)are
lengths,
models
you
a choice 16.000
ofmm)
widths
suit
your
They arein
isFour
furnished
inprovide
24.000in
in.standard
(609.600
lengths.
Also,
all application.
styles
available
available
in 25.0
standard
16.000
in. (406.400
mm)choice
lengths,
except
97-515
which
except 97-515
which
is furnished
in your
24.000
in.of(609.600
mm)
lengths.
continuous
ft.
(7.6
m)
coils,
and in
all finishes
except
tin
is
furnished
in 24.000
in.
(609.600
mm)load/deflection
lengths.25.0
Also,ft.
all
styles
available
Also,
all satin
styles
areseeavailable
in continuous
(7.6
m)are
coils,
and in
in
lead
and
tin,
page
1-11.
For
data,
see
page
2-33.
continuous
25.0
ft. (7.6
m) coils,
andtin
in your
of alltin,
finishes
except17.
tin
your choice
of products
all
finishes
except
leadinchoice
and
satin
see
page
low
compression
These
97-Series
are
also
available
UltraSoft
lead and satin tin, see page 1-11. For load/deflection data, see
page 2-33.
force
These98-Series.
97-Series products are also available in UltraSoft low
These 97-Series products are also available in UltraSoft low compression
compression force 98-Series.
force 98-Series.
FOLDOVER
SERIES
SERIES
D
PITCH
E
SLOT
I
DIA.
EE D
SERIES
97-515
A
0.760
(19.304)
B
0.230
(5.842)
C
0.004
(0.102)
D
0.375
PITCH
(9.525)
E
0.032
SLOT
(0.813)
I
0.080
DIA.
(2.032)
L
0.060
(1.524)
97-515
97-521
0.760
0.510
(19.304)
(12.954)
0.230
0.140
(5.842)
(3.556)
0.004
0.003
(0.102)
(0.076)
0.375
0.250
(9.525)
(6.350)
0.032
0.022
(0.813)
(0.559)
0.080
0.060
(2.032)
(1.524)
0.060
0.070
(1.524)
(1.778)
APPROX. APPROX.
LENGTH
COIL
IN. (MM) APPROX.
FT. (M)
APPROX.
24.000
25.0
LENGTH
COIL
(609.600)
(7.6)
IN. (MM) FT.
(M)
24.000
25.0
16.000
25.0
(609.600)
(7.6)
(406.400)
(7.6)
97-521
97-541
0.510
0.380
(12.954)
(9.652)
0.140
0.120
(3.556)
(3.048)
0.003
0.003
(0.076)
0.250
0.188
(6.350)
(4.775)
0.022
0.018
(0.559)
(0.457)
0.060
0.060
(1.524)
0.070
0.050
(1.778)
(1.270)
16.000
16.000
(406.400)
25.0
25.0
(7.6)
CC
97-541
97-542
0.380
0.250
(9.652)
(6.350)
(6.350)
0.120
0.080
(3.048)
(2.032)
(2.032)
0.003
0.003
(0.076)
(0.076)
0.188
0.188
(4.775)
(4.775)
0.018
0.018
(0.457)
(0.457)
0.060
0.060
(1.524)
(1.524)
0.050
0.050
(1.270)
(1.270)
16.000
16.000
(406.400)
(406.400)
25.0
25.0
(7.6)
(7.6)
97-542
0.250
(6.350)
0.080
(2.032)
0.003
(0.076)
0.188
(4.775)
0.018
(0.457)
0.060
(1.524)
0.050
(1.270)
16.000
(406.400)
25.0
(7.6)
FOLDOVER SERIES
D
D
II
I
A
A
A
BB
B
LL
Smallest
Smallest
Opening
Opening
L
Smallest
Opening
Double Adhesive
Adhesive
Double
TransferTape
Tape
Transfer
Double Adhesive
Transfer Tape
Laird offers its line of card cage shielding, designed to provide EMI/RFI
shielding between the chassis and the slot covers.
Laird
offers
its line ofare
cardlow
cage
shielding, designed
to provide
EMI/RFI
Series
97-941/921
compression,
flexible beryllium
copper
contact
A
A
C
C
A
C
B
B
18
contact
fingers
ribisis provides
contact
points
over
length
the I/O
Simple
snap-in
installation
possible
for
Series
97-921
with
0.250
in.of(6.350
(6.350
Material
thickness
ofper
0.004
in.
(0.102
mm)
insures
low
closure
force
and
Simple
possible
for
Series
97-921
with
0.250
in.
shapes snap-in
and
turninstallation
tight
radius
corners
in
either
direction.
mm) slots
slots
and
97-941
with 0.190
0.190
in. (4.826
(4.826
mm) slots.
slots. However,
However, soft
soft solder
solder or
or
bracket
shield
eliminates
possible
distortion
of mating
parts
mm)
and
97-941
with
in.
mm)
L
L
Simple snap-in
installation
possible
for Series 97-921
with 0.250 in. (6.350
adhesive
can beisused
for mounting
to flat surfaces.
conductive
97-941
97-941
adhesive
canribbe
used forcontact
mounting
to flat
surfaces.
conductive
Superior
finger
the mm)
card
cage
portion
insuring
18
fingers
per
provides
points
over
length of
the
I/O or
mm)contact
slotscontact
and
97-941
withdesign
0.190 faces
in. (4.826
slots.
However,
soft
solder
Shieldingshield
effectiveness
>115
dBforfor
formounting
100 MHz
MHz
plane
wave.
Shielding
effectiveness
>115
aa 100
plane
wave.
bracket
snag-free
insertion
of isisadd-in
cards
adhesive can
be
useddB
to flat
surfaces.
conductive
L
0 .047
0 .047
(1.194)
(1.194)
97-941
Available in standard 24.000 in. (609.600 mm) lengths in all standard finishes,
Available
in
standard
24.000
in.faces
(609.600
mm)
lengths
in wave.
alltoinsuring
standard
finishes,
Superior
finger
design
card
cage
portion
Shieldingcontact
effectiveness
isprovides
>115
dB
forthe
a 100
MHz
plane
Stainless
steel
design
galvanic
compatibility
most enclosure
see page
page 1-11.
For load/deflection
load/deflection
data, see
see page
page 2-33.
2-33.
see
For
data,
snag-free
of24.000
add-in in.
cards
materials
Available 1-11.
ininsertion
standard
(609.600
mm) lengths
in all standard finishes,
0 .047
(1.194)
FLAT BLANK
FLAT BLANK
97-921
97-921
95-1000
0.188
0.188
(4.775)
(4.775)
see
page steel
1-11.
For load/deflection
data,
see
page 2-33.
Stainless
design
provides
galvanic
to most
FLEXIBLE
LOW
COMPRESSION
SERIES
Adaptable
tooling
allows
for SERIES
1-21
slotcompatibility
configurations
withenclosure
no tooling cost
FLEXIBLE
LOW
COMPRESSION
0.188
(4.775)
SERIES
A
C
L
SERIES rib
A COMPRESSION
C upon request
L
Variable
widths
areBB available
FLEXIBLE
LOW
SERIES
FLAT BLANK
97-921
Q
Q
R
R
APPROX.
APPROX.
97-921
0.260
0.230
0.003
0.140
0.120
0.250
24.0
SERIES
Aparticular
B application,
C
L
Q our sales
R
APPROX.
97-921
0.260
0.230
0.003
0.140
0.120
0.250
24.0
To discuss
your
please
contact
department.
(6.604)
(5.842)
(0.076)
(3.556)
(3.048)
(6.350)
(609.600)
Q
Q
Q
R
R
95-1000
Patent No. 4,572,921
Patent No. 4,572,921
materials
LENGTH
Adaptable tooling allows for 1-21 slot configurations with no toolingLENGTH
cost
0.260
0.230
0.003
0.140
(3.048)
0.120
(6.350)
0.250
LENGTH
(609.600)
24.0
(4.953)
(4.318)
(0.076)
(2.794)
(2.286)
(4.826)
(609.600)
97-941
0.195
0.170
0.003
0.110
0.090
0.190
24.0
97-941 your0.195
0.170
0.003
0.110
0.090
0.190
24.0
To discuss
particular(5.842)
application,
contact(3.048)
our sales(6.350)
department.
(6.604)
(0.076) please
(3.556)
(609.600)
(4.953)
(4.318)
(2.794)
(2.286)
(4.826)
HOW
TO ORDER
97-941start with
0.195 009510
0.170 as the
0.003
0.090next two
0.190digits 24.0
All parts
first six0.110
digits. The
designate
(2.286)
(609.600)
HOW
TO ORDER
the
number
of(4.953)
slots in (4.318)
the part.(0.076)
The last (2.794)
two digits
will be (4.826)
00 for all
standard
All parts start with 009510 as the first six digits. The next two digits designate
configurations.
Example:
an 00
18for
slotallpart.
the number of slots
in the 0095-1018-00
part. The last tworepresents
digits will be
standard
TOP VIEW
All dimensions
shown
are in inches (millimeters) unless otherwise specified.
0.310 (7.874)0.490
TYP (12.446) TYP
0.113
(2.870) REF
0.100
(2.540)
3.943
(100.152)
4.725
(120.015)
0.100
(2.540)
S lot Opening
S lot Opening
4.725
(120.015)
www.lairdtech.com
A
0.155 (3.937)
0.113
(2.870) REF
3.943
(100.152)
TOP VIEW
0.015
(0.381)
0.015
(0.381)
0.028 (0.711)
0.028 (0.711)
0.113 (2.870)
0.113 (2.870)
0.430
(10.922)
0.430
(10.922)
33
(6.350)
(2.032)
(0.076)
(4.775)
(0.457)
(1.524)
(1.270)
(406.400)
(7.6)
L
Smallest
Opening
L
Smallest
Opening
Double Adhesive
Transfer Tape
Double Adhesive
Transfer Tape
EMI ESSENTIALS
FINGERSTOCK
FLEXIBLE LOW COMPRESSION SERIES
Series
97-941/921
arecompression,
low compression,
flexible
beryllium
Series 97-941/921
are low
flexible beryllium
copper
contact copper contact strips for
strips for applications
where
a continuousshield
shield must
to irregular
applications
where
a compression,
continuous
mustconform
conform
to irregular shapes and turn tight
Series 97-941/921
are low
flexible beryllium
copper contact
shapes and turn tight radius corners in either direction.
strips forcorners
applications
where adirection.
continuous shield must conform to irregular
radius
in either
Simpleand
snap-in
possibleinfor
Series
97-921 with 0.250 in. (6.350
turn installation
tight radiusiscorners
either
direction.
shapes
Simple
snap-in
installation
is possible
97-921
with
mm) slots
and 97-941
with 0.190 in.
(4.826 mm)for
slots.Series
However,
soft solder
or 0.250 in. (6.350 mm)
Simple snap-in installation is possible for Series 97-921 with 0.250 in. (6.350
adhesive can
be used
for mounting
to flat
surfaces.
conductive
slots
andand97-941
with
0.190
in. (4.826
mm)
slots.
mm) slots
97-941 with
0.190
in. (4.826
mm) slots.
However,
softHowever,
solder or soft solder or conductive
Shielding adhesive
effectiveness
is >115
dB for
a 100 to
MHz
plane
wave.
be
used
for
mounting
to flat
surfaces.
conductive
adhesive
can becan
used
for mounting
flat
surfaces.
Availableeffectiveness
in standard 24.000
mm)
lengths
all standard finishes,
Shielding
is >115in.dB(609.600
for a 100
MHz
planeinwave.
Shielding
effectiveness
is >115
100 MHz plane wave.
see page 1-11.
For load/deflection
data,dB
seefor
pagea 2-33.
Available in standard 24.000 in. (609.600 mm) lengths in all standard finishes,
Available
in standard
24.000
in.see(609.600
see
page 1-11.
For load/deflection
data,
page 2-33.mm) lengths in all standard finishes,
FLEXIBLE LOW COMPRESSION SERIES
seeSERIES
page 17.A
B
C
L
Q
R
APPROX.
A
C
A
C
B
L
97-941
L
0 .047
(1.194)
97-941
0 .047
(1.194)
0.188
(4.775)
FLAT
0.188
BLANK(4.775)
97-921
97-921
97-921
97-941
A0.260
(6.604)
0.260
0.195
(6.604)
(4.953)
(5.842)
(0.076)
(3.556)
(3.048)
(6.350)
(609.600)
(4.318)
(0.076)
(2.794)
(2.286)
(4.826)
(609.600)
Clip-On
Twist0.003
Series gaskets
are0.090
offered0.190
in four different
widths, each available
0.170
0.110
24.0
either
equal
leg or(2.794)
offset
leg
configurations.
In addition,
offset leg
(4.318)
(0.076)
(2.286)
(4.826)
(609.600)
Idealinfor
general
shielding
applications
where
mounting
space is each
at a premium,
R
configuration
is available
with Poron
rubber environmental
for dust
Clip-On
Twist Series
strips combine
the performance
advantages gaskets
of scientific
97-552, 589
Patent No. 4,572,921
moisture
as with
D lances that snap into 0.100 in.
twistand
design
with resistance,
the strengthasofwell
clip-on
mounting.
(2.540 mm) diameter holes to provide added mounted strength.
Clip-On Twist Series gaskets are offered in four different widths, each available
97-572
All dimensions shown are in inches (millimeters) unless otherwise specified.
This series
> 115
dB for a 100
plane
97-580
in either
equal offers
leg orshielding
offset legeffectiveness
configurations.
In addition,
eachMHz
offset
leg
97-563
All dimensions shown are in inches (millimeters) unless otherwise specified.
wave and isis available
provided with
in standard
in. (406.400 mm)
lengths.
All
rubber environmental
gaskets
for dust
configuration
Poron 16.000
available
in your as
choice
pagethat
1-11.
For into
load/deflection
and are
moisture
resistance,
well ofasfinishes,
with Dseelances
snap
0.100 in.
Ideal for general shielding
applications
mounting space is at a premium,
data,
seediameter
pagewhere
2-33.
(2.540
mm)
holes
to provide added mounted strength.
97-576
Twistshielding
Series
strips
combine
the mounting
performance
advantages
of scientific
97-572
IdealClip-On
for
applications
where
space
is atmounting
a premium,
97-552, 589
forgeneral
general
shielding
applications
where
space is at a premium, Clip-On Twist
97-584 Ideal
lowplane
compression
These
97-Series
products
are also
available
UltraSoft
twistTwist
design
withstrips
the series
strengthoffers
of clip-on
mounting.
This
shielding
effectiveness
> 115 dBinfor
a 100 MHz
Clip-On
Series
combine
the
performance
advantages
of scientific
97-552, 589 97-580
Series
strips
combine
the
performance
advantages
of
scientific
twist design with the strength
twistClip-On
designTwist
with the
strength
of98-Series.
clip-on
mounting.
force
wave
and
is provided
in standard
16.000
(406.400 mm) lengths. All
Series
gaskets
are
offered
in four
different widths,
eachin.available
ofClip-On
clip-on
in either
equal
offset
leg configurations.
In widths,
addition,
each
offset
leg 1-11. For load/deflection
Twistmounting.
Series leg
gaskets
are offered
four different
each
available
97-563
areoravailable
ininyour
choice
of finishes,
see
page
DETAIL OF
in either
equal leg isordata,
offset see
legwith
configurations.
In addition,
leg for dust
97-563
rubber
environmental
gaskets
configuration
available
Poron
page
2-33.
Clip-On
Twist Series
gaskets
are
offered
in each
fouroffset
different
widths, each available in either
D LANCE
97-576
Q
97-941
97-563
0.195
(4.953)
97-568 configuration
rubber
gaskets
is available
withasPoron
and moisture
resistance,
well as
withenvironmental
D lances that
snap for
intodust
0.100 in.
97-584
and(2.540
moisture
as
well
as
D
lances mounted
that
snap
into
0.100
in.inoffset
low compressionis available
These
97-Series
products
areaddition,
alsostrength.
available
UltraSoft
equal
legmm)
orresistance,
offset
leg
configurations.
In
each
leg configuration
diameter
holes
to with
provide
added
(2.540 mm) diameter
holes
to
provide
added
mounted
strength.
98-Series.
This series offersforce
shielding
effectiveness > 115 dB for a 100 MHz plane
97-572
97-572
97-580
97-580
DETAIL OF
D LANCE
DETAIL OF
DETAIL OF
D LANCE
D LANCE
97-568
97-576
97-576
97-584
97-584
97-568
97-568
A
E
C*
B
*Variations
in clip-on
the clip-on
*Variations
in the
area area
are are
available.
Consult
department.
available.
Consult
salessales
department.
AA
C*
with Poron rubber environmental gaskets for dust and moisture resistance, as well as with
Thiswave
seriesand
offers
shielding
effectiveness
>
115 dBin.for(406.400
a 100 MHz
plane
is in
provided
in standard
16.000
mm)
lengths. All
*Variations
thesnap
area are
D
lances
that
into
0.100
in.page
(2.540
mm)
diameter
holes to provide
added mounted
0.230
wave
and
is provided
inclip-on
standard
in. see
(406.400
mm)
All
are
available
in your
choice
of16.000
finishes,
1-11.lengths.
For load/deflection
available.
Consult
sales
department.
(5.842)
are data,
available
in
your
choice
of
finishes,
see
page
1-11.
For
load/deflection
strength.
see page 2-33.
A
data, see page 2-33.
0.031
lowdB
compression
These 97-Series
products
are also
available in UltraSoft
(0.787)
0.041
This
offers
shielding
effectiveness
115
for a 100 MHz
plane wave
and is provided
compression
Theseseries
97-Series
products
are also available
in UltraSoft >low
(1.041)
force 98-Series.
B
98-Series.16.000 in. (406.400 mm) lengths.
inforce
standard
All are available in your choice of finishes, see
*Variations in the clip-on area are
0.230
available.
(5.842)
page
17.Consult sales department.
A
0.031 force 98-Series.
These C*97-Series products are also available in UltraSoft low compression
(0.787)
C*
0.230
(5.842)
0.031
(0.787)
C* C*
(3.810)
(0.762)
0.070
(1.778)
97-563
CLIP-ON TWIST
SERIES 0.210
S ERIETWIST
S
CLIP-ON
SERIESA (5.334)
0.070
B (1.778)
0.070
C (1.778)
97-568*
A
A
0.414 B
(10.516)
0.150 0.150
0.030
0.150
0.030
(0.762)
(3.810)0.275
97-572 (3.810)
(3.810)
(0.762)
97-563
0.210
0.070
97-563
0.210(6.985)
97-563
0.210
0.070
(5.334)
(1.778)
(5.334)0.378(1.778)
(5.334)
97-568* 97-576 0.414
0.210
(10.516)
(5.334)
97-568*
97-568*
0.4140.414(9.601)
0.210
(10.516)
(5.334)
97-572
0.275(10.516)
0.030
97-552
97-552
97-552
0.210C
0.030(5.334)
0.070
0.070
(1.778)
(0.762)0.030
D
0.070
(1.778)
0.070
0.150
0.150
(3.810)
(1.778)
0.070
0.070
0.070(0.762)
0.070
(1.778)
(1.778)0.075
(1.778)
0.210
(1.778)
0.070
0.210
(5.334)
(1.778)
(5.334)
0.070
(1.778)
0.210(1.905)
0.070
(1.778)
(5.334)0.030
0.070
(1.778)
(10.516)
0.070
0.414
(10.516)
(1.778)
0.175
0.050
(1.778)
(3.810)
0.070
0.414
97-580
0.275
(6.985)
(0.762)
(1.778)
0.275
0.030
0.070
97-572
0.275(6.985)
0.030(0.762)
(6.985)
(0.762)
(1.778)
0.378
0.075
0.070
(6.985)
(0.762)
0.378
0.075
(1.905)
(1.778)
97-576 97-584 (9.601)
0.378
0.075
0.070
97-576
0.378(9.601)
(9.601)
(1.905) 0.075(1.905)
(1.778)
97-580
0.275
0.030
0.050
(0.762) (1.905) (1.270)
(9.601)0.230
97-580 97-589 (6.985)
0.275
0.030
0.050
0.031
97-572
(4.445)
0.175
0.070(1.270)
(4.445)
0.250
(1.778)
0.050
(6.350)
0.250
(1.270)
0.070
(6.350)
0.175
(4.445)
(1.778)
0.175
0.070
97-576
(6.985)
(0.762)
0.378
0.075
0.275(5.842)
(9.601)
(1.905)
0.378
(6.985)0.160 0.075
97-590 0.230
0.031
(9.601)
(1.905)
(5.842)0.378(4.064)
(0.787)
97-584
97-589
0.230
0.031
(9.601)
97-590
0.160
0.030
(5.842)
(0.787)
*Standard with
D Lance
(4.064)
(0.762)
97-589
97-590
0.1600.230
0.030
*Standard withD Lance (4.064)
(0.762)
(5.842)
(1.270)
0.050
0.030(0.787)
(1.270)
0.050
(0.762)0.030
0.070
(1.270)
(1.778)
0.075(0.762)
0.070
(1.905) 0.040
(1.778)
*Standard
withD Lance
97-590
0.030
(0.762)
97-584
97-580
97-584
97-589
0.160
(4.064)
0.031
(0.787)
(4.445)
0.250
0.050(1.778)
(6.350)
(1.270)0.250
0.040
0.160
(6.350)
(1.016)
(4.064)
0.050
0.160
(1.270)
0.160
(4.064)
(1.016)
0.040
(1.016)
(4.064)
0.0700.160
(4.064)
(1.778)
0.040
(1.016)
otherwise specified.
www.lairdtech.com
E 97-552, 97-563,
P ITCH 97-568
(3.810)
0.210
D (5.334)
0.025
(0.635)
0.025
(0.635)
S L OT
0.160
(4.064)
(0.076)
0.095
(2.413)
0.015
(0.381)
0.003
E (0.076)
0.165
P ITCH(4.191)
0.015
S L OT(0.381)
0.160
(4.064)
0.025
(0.635) 30
AP P ROX.
LENGTH
97-58997-589
16.000
(406.400)
0.175
P ITCH
P ITCH
S L OT
16.000
AP P R(406.400)
OX.
0.003
0.095
0.015
(0.076)
(2.413)
(0.381)0.015
(406.400)
0.003
0.095 (0.076)
16.000
97-574
0.175(4.445)
0.003
0.095 (2.413)
0.015 (0.381)
(2.413)
0.003(0.076)
0.015 (0.381)
16.000(406.400) 97-578
(4.445)0.250 0.165 (0.076)0.003
(2.413)0.165
(0.381)0.015
(0.076)
(4.191)
(0.381)0.015
(406.400)
0.003
0.165
16.000
97-578
(6.350)
0.250
(0.076)
0.003
(0.076)
(6.350)
0.0030.160
0.003(0.076)
0.175(4.064)
(0.076)
0.003
(4.445)
0.160
0.003
(0.076)
(0.076)
0.250(4.064)
0.003
(6.350)
0.003
(0.076)
(0.076)
0.160
0.003
(0.076)
(4.064)
0.160
(4.064)
(0.381)
0.003(0.076)
0.165(4.191)
0.095(4.191)
0.015 (0.381)
16.000(406.400)0.015
97-582
(2.413) (0.076) (0.381) (4.191)(406.400)
0.095
97-582
0.003 0.015
0.09516.000 (0.381)0.015
0.165(2.413) (0.076)
0.015 (0.381)
16.000(406.400) 97-586
0.003
0.095(2.413)
0.015 (0.381)
(4.191)
(0.381)
(406.400)
0.165
97-586
(0.076)0.003 0.015(2.413)0.095 16.000 (0.381)0.015
0.095
0.015(0.381)
24.000
(4.191)
(406.400)
(2.413) 0.003(0.076)
(0.381)
(609.000)
0.165(2.413)
0.015 (0.381)
0.095
0.015
24.000
0.095
(2.413)
0.015
(0.381)
30
0.160
(4.064)
30
WITH
D LANCE
97-553
97-564
PART NO.
97-589
WITH
PORON
WITH D LANCE
WITH PORON
PART NO.
WITH
PORON
WITH D LANCE
WITH PORON
97-573
97-575
97-577
97-579
16.000
97-582
97-573
97-575
(406.400)
16.000
97-574
97-579
(406.400)
16.000
97-586
97-577
97-579
(406.400)97-58397-578
16.000
97-581
(406.400)
97-581
97-583
24.000
97-581
97-573
97-583
97-575
97-585
97-577
97-587
97-579
97-585
97-581
AP P ROX.
PARLENGTH
T NO.
WITH
E 0.414
P P ROX.
RT NWITH
O. D LANCE
LENGTH
WITH0.015
WITH PA16.000
0.003 S L OT
0.500ALENGTH
D
LANCE
D LANCE
WITH
D LANCE WITH PORON WITH WITH PORON
(10.516)
(0.076)
(12.700)
(0.381)
(406.400)
D
LANCE
PORON
WITH
PORON
0.150
0.003
0.095
0.015
16.000
97-553
0.003
0.095
0.015
16.000
97-553
0.003
0.095
16.000 (0.381) 97-553
(0.076)
(0.381)0.015
(406.400)
(3.810)
(0.076)0.003
(2.413)0.095
(406.400)
0.175 (2.413)(2.413)
0.015
16.000
97-574
(0.076)
(0.381)
(406.400)
0.003 (4.445) 0.165
0.015
16.000
97-564
(406.400)
(0.381)
0.210
0.003(0.076)
0.165(2.413)
0.015
16.000
97-564
0.003
0.165
16.000
97-564
(0.076)
(4.191)
(0.381)0.015
(406.400)
(5.334)
(0.076)0.003 (0.381)
(4.191)0.165 (406.400)(0.381)0.015
(406.400)
(0.076)
(4.191)
97-578
0.003 0.250 0.500
0.015
16.000
16.000
(6.350) (12.700)0.500
(0.076)
(4.191)
(0.381)
(406.400)
(0.076)
(0.381) 0.0150.500
(406.400)16.000 0.015
0.414
0.003
16.000
0.003
(0.076)
(10.516)
(0.076) 0.015 (0.381)
(12.700)
(406.400)
0.003
0.095(12.700)
16.000 (406.400)(0.381)
97-574
97-573
97-575
E
30
0.160
(4.064)
97-589
R.0.035 R.0.035
(0.889) (0.889)
A97-580, 97-576,
B 97-584
97-572,
DD
0.025
(0.635)
0.031
(0.787)
R.0.035
(0.889)
R.0.035
(0.889)
EE
C*
34
0.230
(5.842)
0.041
0.041
(1.041) (1.041)
0.041
(1.041)
97-577
(609.000)97-58797-582
16.000
97-585
97-587
(406.400)
97-593
16.000
(406.400)
16.000
97-586
(406.400)
24.000
(609.000)
16.000
(406.400)
97-593
97-583
97-585
97-587
DETAIL OF RIGHT
ANGLE 97-558
DETAIL OF RIGHT
ANGLE 97-551
97-569
EMI ESSENTIALS
FINGERSTOCK
TWIST SERIES
DETAIL OF RIGHT
ANGLE 97-558
DETAIL OF RIGHT
ANGLE 97-551
97-550
97-551
97-555
97-556
97-558
97-559
97-569
97-560
97-567
97-561
NO
97-569 0.080
are two 9097-555
degree versions
(Series 97-551
and 97-558)
97-550
97-551
97-556
97-558
97-559
97-560
97-561
(4.064)
(0.762) 97-567
(0.076)
(2.413)
(0.381)
(2.032)
are(609.600)
two 90 degree versions (Series 97-551 and 97-558)
to provide alternate mounting capability. Series 97-555, 97-558 and 97-559
97-555
0.340
0.070
0.003
0.165
0.015
0.180
24.000
25.0
NO
to provide
alternate
mounting capability. Series 97-555,
provide shieldingAdhesive-mounted
effectiveness > 100
dB for
a 100
MHzstrips
plane wave,TWIST
idealSERIES
beryllium
copper
contact
(8.636)
(1.778)
(0.076)
(4.191)
(0.381)
(4.572) (609.600)
(7.6)
with or
scientific
twist enclosures.
design offer narrow
for all types of panel
electronic
Series electronic
97-550, 97-551 and
97-558
97-559
SERIES
A
B
C0.340
D 0.070 E 0.003 H 0.165
APPROX. 0.015
APPROX. GASKET
97-556
0.180
24.000and25.0
YES provide shielding effectiveness > 100
PITCH
SLOT
LENGTH
COIL
gaskets foreffectiveness
general shielding
applications.
(8.636)
(1.778)
(0.076)
(4.191)
(7.6)
IN. (MM)(0.381)
FT. (M) (4.572)
97-560 provide shielding
> 115
dB for a 100 MHz plane wave.
dB (609.600)
for a 100
MHz plane wave, ideal for all types of panel
97-550
0.230
0.030
0.003
NO
97-558
0.200 0.095
0.070 0.015
0.003 0.1400.16524.000 0.01525.0 0.110
24.000
NO
Different
widths are suitable
available for
to suit
your specific
Series 97-560 strips
are especially
cabinets
with panel divider
(5.842)
(0.762)
(0.076)
(2.413)
(0.381)
(3.556) (609.600)
(7.6)
(5.080)
(1.778)
(0.076)
(4.191)
(0.381)
(2.794)
(609.600)
enclosures. Series 97-550, 97-551 and 97-560
or
electronic
for single
edgepermits
contact panels
strips. Also
bars. Their uniqueapplication
double-edge
design
to available
be removed
easily
97-551
0.160
0.030
0.003
0.095
0.015
0.080
24.000
NO
DETAIL
OF RIGHT
DETAIL
97-550
97-551 (Series
97-555
97-556
97-558OF RIGHT
97-559
97-560
97-567
97-561
are
two
90
degree
versions
97-551
and
97-558)
97-559 (0.076)
0.300 (2.413)
0.070 (0.381)0.003(2.032) 0.165
0.180
24.000
25.0
NO
(4.064)
(0.762)
(609.600) 0.015
NO
Series
97-560
strips
are
especially
suitable
for
cabinets
with
panel
divider
(12.700)
(1.778)
(0.076)
(4.826)
(609.600)
(7.6)
All are available
your choice
of
finishes,
seefurnished
page
1-11.in
For
load/deflection
AllinTwist
Seriespermits
strips
aresingle
24.000
in. (609.600
mm)
lengths.
Strips
(except 97-551
and 97-558) are
also available in standard 25.0 ft. (7.6 m)
application
for
edge contact
strips.
Also
available
(5.080)
(1.778)
(0.076)
(4.191)
(0.381)
(2.794) (609.600)
bars.data,
Their see
unique
double-edge
design
panels
to
be
removed
easily
are
two
90
degree
versions
(Series
97-551
and
97-558)
97-567
0.725
0.209
0.003
0.500
0.015
0.408
24.000
25.0
NO
page 2-33.
97-559 available
0.300
0.070
0.003
0.165
0.015
0.180 in 24.000
25.0
NO
coils.
Right
product
configurations
are
not
in coils.
are (0.381)
available
your(0.381)
choice
of finishes,
see
and replaced without
to theangle
installed
strip. Series
todamage
provide
alternate
mounting
capability.
97-555, 97-558 and
97-559
(18.415)All (5.309)
(0.076)
(12.700)
(10.363)
(609.600)
(7.6) page 17.
(7.620)
(1.778)
(0.076)
(4.191)
(4.572) (609.600)
(7.6)
SERIES
D
PITCH
E
SLOT
97-550
0.230
(5.842)
0.030
(0.762)
0.003
(0.076)
0.095
(2.413)
0.015
(0.381)
0.140
(3.556)
97-551
0.160
(4.064)
0.030
(0.762)
0.003
(0.076)
0.095
(2.413)
0.015
(0.381)
0.080
(2.032)
24.000
(609.600)
97-555
0.340
(8.636)
0.070
(1.778)
0.003
(0.076)
0.165
(4.191)
0.015
(0.381)
0.180
(4.572)
24.000
(609.600)
25.0
(7.6)
NO
0.340
(8.636)
0.070
(1.778)
0.003
(0.076)
0.165
(4.191)
0.015
(0.381)
0.180
(4.572)
25.0
(7.6)
YES
0.200
(5.080)
0.070
(1.778)
0.003
(0.076)
0.165
(4.191)
0.015
(0.381)
0.110
(2.794)
24.000
(609.600)
NO
shielding effectiveness > 100 dB for a 100 MHz plane wave, ideal
All Twist
Series stripsprovide
are furnished
in 24.000 in. (609.600
mm) lengths.
0.500
COMBINATION
RUBBER
GASKET
for all ENVIRONMENTAL
types of panel or electronic enclosures.
Series 97-550,
97-551 and 97-560 97-556
(12.700)
Strips
(except
97-551
and97-561
97-558)
areversions
alsoeffectiveness
available
in115
standard
ft. respectively,
97-560
provide are
shielding
>
dB
for 97-560,
a25.0
100 MHz
plane wave.
Series
97-556
and
of 97-555
and
(7.6 m) coils. Right angle
product
configurations
are
not
available
in
coils.
97-561
97-558
strips gasket
are especially
suitable
cabinets with panelshield,
divider offering0.500
rubber
to act
as anforenvironmental
incorporating a Series
Poron97-560
(12.700)
bars.choice
Their unique
double-edge
design1-11.
permitsFor
panels
to be removed easily
All are available in your
of finishes,
see page
load/deflection
a
high
degree
of
protection
against
dust
and
moisture.
All
are
available
in your
97-559
97-550
and
replaced
without
damage
to
the
installed
strip.
97-567
0.725
data, see page 2-33.
97-569
0.500
0.120
0.003
0.250
0.015
NO
0.250
24.000
25.0
NO
0.070
0.003
0.165
0.015
0.190
24.000
25.0
NO
COMBINATION ENVIRONMENTAL RUBBER GASKET (1.778)
(12.700) (4.191)
(3.048) (0.381)
(0.076)(4.826)(6.350)
(609.600)
(7.6)
(0.076)
(609.600)(0.381)
(7.6) (6.350)
0.070
0.003
0.165
0.015
0.190
24.000
25.0
YES
Series 97-556 and 97-561 are versions of 97-555 and 97-560,
respectively,
incorporating
a
Poron
rubber
gasket
to act as an environmental shield,
(1.778)
(0.076)
(4.191)
(0.381)
(4.826) (609.600)
(7.6)
97-558
97-559
97-567
0.209 97-551
0.003
0.500 97-555
0.015
0.408 97-556
24.000
25.0
NO
offering
a
high
degree
of
protection
against
dust
and
moisture.
All
are
available
in
your
choice
of
finishes,
see
page
17. 97-560
(18.415) (5.309)
(0.076)
(12.700)
(0.381) (10.363) (609.600)
(7.6)
choice of finishes,
see Series
pagestrips
1-11.
load/deflection
data, see
In Flat
All Twist
are For
furnished
in 24.000 in. (609.600
mm)page
lengths.2-33.
In Flat
H
H
E
0.500
0.120
0.003
0.250
0.015
0.250
24.000
25.0
NO
Strips (except
97-551 and RUBBER
97-558) are GASKET
also
available
standard 25.0 ft.
These
97-Series
are
alsoin available
in97-569
UltraSoft
low
compression
force(6.350)
98-Series.
COMBINATION
ENVIRONMENTAL
TWIST SERIES
Adhesive-mounted
beryllium
copper
contact
low compression
These 97-Series
products
are also products
available
in
UltraSoft
(12.700) (3.048)
(0.076)
(6.350)
(0.381)
(609.600)
(7.6)strips
D
(7.6 m) coils. Right angle product configurations are not available in coils.
0.300
(7.620)
0.070
(1.778)
0.003
(0.076)
0.165
(4.191)
0.015
(0.381)
0.180
(4.572)
24.000
(609.600)
25.0
(7.6)
NO
97-560
0.500
(12.700)
0.070
(1.778)
0.003
(0.076)
0.165
(4.191)
0.015
(0.381)
0.190
(4.826)
24.000
(609.600)
25.0
(7.6)
NO
97-561
0.500
(12.700)
0.070
0.003
0.165
0.015
0.190
24.000
25.0
YES
97-567
0.725
(18.415)
(5.309)
(0.076)
(12.700)
(0.381)
(10.363)
(609.600)
(7.6)
Series 97-556 and 97-561 are versions of 97-555 and 97-560, respectively,
force 98-Series. rubber
are available
your
finishes, see pageshield,
1-11. For
load/deflection
gasketin to
actchoice
as anofenvironmental
offering
incorporating a PoronAll
data, see page 2-33.
a high degree of protection against dust and moisture. All are available in your
H data,RUBBER
choice of finishes, seeCOMBINATION
page 1-11. For ENVIRONMENTAL
load/deflection
see pageGASKET
2-33.
24.000
(609.600)
with
scientific
twist
offer narrow
electronic
(1.778)
(0.076)
(4.191) design
(0.381)
(4.826)
(609.600)
(7.6)
0.209
0.003general
0.500 shielding
0.015
0.408
24.000
25.0
NO
gaskets
for
applications.
0.120
0.003
0.015
0.250to suit
24.000your
25.0specific
NO
Different
widths0.250
are Inavailable
Flat
In Flat
(3.048)
(0.076)
(6.350)
(0.381)
(6.350) (609.600) H (7.6)
E
application for single
edge contact strips. Also available
D
are two 90 degree versions (Series 97-551 and 97-558)
provide alternate mounting capability.
Series
97-555,
97-558 and 97-559
At Smallest
choice of finishes, see page 1-11. For load/deflection data, see pageto
2-33.
In Flat
InAFlat
H
H
provide shielding effectiveness > 100 dBED for a 100 MHzOpening
plane wave, ideal
H are also available in UltraSoft low compression
These 97-Series products
force 98-Series.
for all types of panel or electronicC enclosures. Series 97-550, 97-551 and
B
A
97-560 provide shielding effectiveness > 115 dB for a 100B MHz plane wave.
Free
Position
Free Position
H
At Smallest for cabinets with panel
Series 97-560 stripsA are
especially suitable
divider
A
0.06
Opening
Poron
(1.524)
Gasket
bars. Their unique double-edge
design permits panels
to be
removed
Double Adhesive
Transfer Tapeeasily
Poron
C
Gasket
B
Double Adhesive
C
At
Smallest
and replaced without damage
to the installed
strip.
A
A
B
A
Opening
Transfer Tape
97-569
0.500
H (12.700)
Series 97-556 and 97-561 are versions of 97-555 and 97-560, respectively,
SERIES
D
PITCH
E
SLOT
97-550
0.230
(5.842)
0.030
(0.762)
0.003
(0.076)
0.095
(2.413)
0.015
(0.381)
0.140
(3.556)
97-551
0.160
(4.064)
0.030
(0.762)
0.003
(0.076)
0.095
(2.413)
0.015
(0.381)
0.080
(2.032)
24.000
(609.600)
A
97-555
0.340
(8.636)
0.070
(1.778)
0.003
(0.076)
0.165
(4.191)
0.015
(0.381)
0.180
(4.572)
24.000
(609.600)
25.0
(7.6)
NO
97-556
0.340
C
(8.636)
0.070
(1.778)
0.003
(0.076)
0.165
(4.191)
0.015
(0.381)
0.180
(4.572)
24.000
(609.600)
25.0
(7.6)
YES
97-558
0.200
(5.080)
0.070
(1.778)
0.003
(0.076)
0.165
(4.191)
0.015
(0.381)
0.110
(2.794)
24.000
(609.600)
NO
97-559
0.300
(7.620)
0.070
(1.778)
0.003
(0.076)
0.165
(4.191)
0.015
(0.381)
0.180
(4.572)
24.000
(609.600)
25.0
(7.6)
NO
97-560
0.500
(12.700)
0.070
(1.778)
0.003
(0.076)
0.165
(4.191)
0.015
(0.381)
0.190
(4.826)
24.000
(609.600)
25.0
(7.6)
NO
97-561
0.500
(12.700)
0.070
(1.778)
0.003
(0.076)
0.165
(4.191)
0.015
(0.381)
0.190
(4.826)
24.000
(609.600)
25.0
(7.6)
YES
97-567
0.725
(18.415)
0.209
(5.309)
0.003
(0.076)
0.500
(12.700)
0.015
(0.381)
0.408
(10.363)
24.000
(609.600)
25.0
(7.6)
NO
97-569
0.500
(12.700)
0.120
(3.048)
0.003
(0.076)
0.250
(6.350)
0.015
(0.381)
0.250
(6.350)
24.000
(609.600)
25.0
(7.6)
NO
Poron
Gasket
Free
Position
Poron
Gasket
Free Position
97-551/97-558
B
Free
Position
All Twist
furnished in 24.000 in. (609.600 mm) lengths.
C
0.06 Series strips are
C
B
(1.524)
Double Adhesive
Transfer Tape
StripsPoron
(except 97-551 and 97-558)
are
Freealso
Position available in standard 25.0 ft.
Gasket
0.06
(7.6 m) coils.(1.524)
Right angle productDouble
configurations
are not available in coils.
Adhesive Transfer Tape
Poron
Gasket in your choice of finishes, see page 1-11. For load/deflection
All are available
data, see page 2-33.
Double Adhesive
Transfer Tape
97-551/97-558
All dimensions shown are in inches (millimeters) unless otherwise specified.
All dimensions shown are in inches (millimeters) unless otherwise specified.
Series 97-556 and 97-561 are versions of 97-555 and 97-560, respectively,
incorporating a Poron rubber gasket to act as an environmental shield, offering
a high degree of protection against dust and moisture. All are available in your
choice of finishes, see page 1-11. For load/deflection data, see page 2-33.
In Flat
In Flat
LairdTechnologies
Technologies
offersthe
theDivider
Divider
Edge
Shield,
the
latestaddition
addition
to its
its
Laird
offers
the Divider
Edge
Shield,
theShield,
latestthe
addition
to its line
of
Laird
offers
Edge
latest
to
lineofoflongitudinal
longitudinal
shielding
and
grounding
products.The
TheDivider
DividerEdge
Edge
Shield
line
shielding
grounding
products.
longitudinal
shielding
andand
grounding
products.
Divider
EdgeShield
Shield
designedtoto
accommodate
thethe
industrys
trendtrend
toward
miniaturization
and
designed
the
industrys
trend
toward
miniaturization
and
isisLaird
designed
toaccommodate
accommodate
industrys
toward
miniaturizaTechnologies
offers
the Divider Edge Shield, the latest addition to its
reduced
compression
forces.
reduced
compression
forces.
tion
reduced compression
lineand
of longitudinal
shielding and forces.
grounding products. The Divider Edge Shield
Designed
be
applied
the
top
edgeedge
multi-compartmental
castings
designedtoto
to
accommodate
industrys
miniaturization
and
is
Designed
be
applied
totothe
edge
ofoftrend
multi-compartmental
castings
Designed
to
be
applied
tothetop
the
top
of toward
multi-compartmental
reduced
compression
forces.
withwall
wall
thicknessfrom
0.035in.
in.(0.889
(0.889mm)
mm)toto0.055
0.055in.
in.(1.397
(1.397 mm)
mm)
with
thickness
0.035
castings
with
wallfrom
thickness
from
0.035
in. (0.889
mm)
to 0.055
in.
Designed
to be
applied
theinstallation
top edge ofand
multi-compartmental
Clip-on
design
allows
forto
easy
installation
and
secureretention
retention castings
Clip-on
design
allows
for
easy
secure
(1.397
mm)
with wall thickness from 0.035 in. (0.889 mm) to 0.055 in. (1.397 mm)
Uniquefinger
finger
design
provides
extremely
lowcompression
compression
force
Clip-on
design
allows
for easy
installation
and secure
retention
Unique
design
provides
extremely
low
force
Clip-on design allows for easy installation and secure97-551/97-558
retention
Excellent
shielding
and
grounding
properties
Unique
fingerdesign
design
provides
extremely
low compression
Excellent
and provides
grounding
properties
Unique shielding
finger
extremely
low compression
force force
Provided
standardand
12.000
in.(304.800
(304.800
mm)lengths,
lengths,
easily cut
cut
to
Excellent
shielding
and
grounding
properties
All dimensions
shown
are in inches
(millimeters)
unless
otherwise specified.
Provided
ininshielding
standard
12.000
in.
mm)
ororeasily
to
Excellent
grounding
properties
yourdesired
desired
length.
Longer
lengths
available
upon
request.
length.
Longer
lengths
available
upon
request.
your
Provided
in
standard
12.000
in.
(304.800
mm)
lengths,
or
easily
Provided in standard 12.000 in. (304.800 mm) lengths, or easily cut to cut
97-654
available
with
D
Lancelengths
option
your
desired
length.
Longer
lengths
available
upon request.
to
your
length.
Longer
available
upon request.
97-654
isisdesired
available
with
D
Lance
option
Shielding
Effectiveness
97-654 is
D
Lance
option
97-654
is available
availablewith
with
D
Lance
option
Shielding
Effectiveness
Transfer
Impedance
Test 97-654
97-561
NO
E
D
B
Free
Position
Shielding Effectiveness
Transfer Impedance Test 97-654
Attenuation (dB )
Attenuation (dB )
Attenuation (dB )
160
140
140
B
Free Position
97-972
97-972
0.06
(1.524)
Poron
Gasket
0.045 (1.143)
0.045 (1.143)
0.045 (1.143)
0.063 (1.600)
0.063 (1.600)
0.063 (1.600)
0.060 (1.524)
0.060 (1.524)
20
20
97-972
0.052
0.052
(1.321)
0.120
0.120
(3.048)
(3.048)
0.052
(1.321)
0.120
(3.048)
97-972(1.321)
0.060 (1.524)
20
0.030
0.030
(0.762)
(0.762)
0.055 (1.397)
0.055 (1.397)
0.062 (1.575)
0.062 (1.575)
0.030
(0.762)
0.055 (1.397)
FRONT VIEW
VIEW
FRONT
0.062 (1.575)
FRONT VIEW
97-654
97-972
97-972
0.157 Pitch
0.157
Pitch
(3.988)
(3.988)
0.157
Pitch
SIDE
VIEW
SIDE
VIEW
(3.988)
SIDE VIEW
140
120
120
120
100
100
100
80
80
80
60
60 60
0.030 (0.762)
0.030
0.030(0.762)
(0.762)
40
40 40
20
20 20
00
0 10K
10K
10K
97-654
97-654Poron
Gasket
Double Adhesive
Transfer Tape
160
160
At Smallest
Opening
100K
100K
100K
1M
1M
1M
10M
10M
10M
Frequency
Frequency(Hz)
(Hz)
Frequency (Hz)
www.lairdtech.com
100M
100M
100M
1G
1G
1G
0.300 Pitch
0.300
Pitch
0.300
Pitch
(7.620)
(7.620)
(7.620)
0.208
0.208
0.208
(5.283)
(5.283)
(5.283)
A
A
0.064
0.064
(1.626)
0.064
0.030 (1.626)
0.030 (1.626)
(0.762)
0.030
(0.762)
(0.762)
0.115
0.115
(2.921)
0.115
(2.921)
(2.921)
0.020
0.020
(0.508)
(0.508)
(0.508)
0.035
0.035
0.035
(0.889)
(0.889)
(0.889)
0.008
0.008
(0.203)
0.008
(0.203)
(0.203)
0.183 (4.648)
0.183 (4.648)
(4.648)
0.183
VIEW A-A
A-A
VIEW
VIEW A-A
35
60
100
40
80
20
60
0.030 (0.762)
40
10K
100K
1M
EMI ESSENTIALS
0
40
10K
100K
10M
100M
10M
100M
1G
0.030 (0.762)
FINGERSTOCK
CARD GUIDE CLIP-ON
0
Frequency (Hz)
10K
100K
1M
10M
100M
0.060 (1.524)
0.115 (2.921)
34
34
0.090 (2.286)
97-973
0.120 (3.048)
0.360 (9.144)
0.020
(0.508)
VIEW A-A
0.035
(0.889)
0.208
(5.283)
1G
Frequency (Hz)
VIEW A-A
97-973
97-973
0.6
0.25
97-973
0.5
L oad (pouLnodasdp(eprofuin
esa
r)p
nLgdo
ers) per finger)
de(rpfoin
ug
nd
Lairdintroduces
Technologies
the Card
Guide Clip-On,
which offers
excellent
Laird
theintroduces
Card Guide
Clip-On,
which offers
excellent
grounding contact from the PC board to a card guide on a rack. The unique
grounding
contact
from
the
PC
board
to
a
card
guide
on
a
rack.
Lairdsnap-in
Technologies
the Card
Clip-On,
which offers
excellent
feature introduces
of the contact
fingerGuide
prevents
any potential
snagging.
This
Theallows
unique
snap-in
ofcontact.
thetocontact
finger
any
potential
grounding
contact
fromfeature
thesliding
PC board
aThe
card
guide
onprevents
a rack. The
unique
for
bi-directional
Card
Guide
Clip-On
gasket
installs
snagging.
Thisofofallows
forand
bi-directional
sliding
contact.
The
Card
Guide
to Technologies
thefeature
edge
the
board
makes
contact
with
ground
onexcellent
the This
card.
snap-in
the
contact
finger
any potential
snagging.
Laird
introduces
the
Cardprevents
Guide
Clip-On,
whichtrace
offers
Thefor
card
then slides
into
card
guide
on
rack.on
Low
compression
forces
allows
bi-directional
contact.
The
Guide
Clip-On
gasket
installs
Clip-On
gasket
installs
the
edge
ofa Card
thethe
board
and
makes
grounding
contact
fromsliding
thetothe
PC
board
to
card
guide
a rack.
The contact
unique
allow
forofeasy
the card.
towith
the
edge
the
board
and of
makes
contact
on
card.
snap-in
feature
ofinstallation
theoncontact
finger
prevents
anyground
potential
snagging.
This
ground
trace
the
card.
The
cardwith
then
slidestrace
into
thethecard
guide
The
then
slidesonto
intosliding
theboard
card
guideThe
onCard
the rack.
Low
compression
forces
allows
for
bi-directional
contact.
Guide
Clip-On
gasket installs
card
Easily
installs
PC
on
the
rack.
Low
compression
forces
allow
for
easy
installation
of
allow
for
easyofinstallation
of the
card.
to theProvides
edge
thebi-directional
board and
makes
with ground
trace on the card.
for
wipingcontact
that eliminates
snagging
the card.
cardinstalls
then slides
the card guide on the rack. Low compression forces
The
Easily
onto into
PC board
Easily
Ideal,
inexpensive
grounding applications
installs
ontosolution
PCofboard
allow
for easy
installation
theforcard.
Provides
for bi-directional
wiping
that eliminates
snagging
High-performance
beryllium
copper
plated with snagging
a wide
Provides
foronto
bi-directional
thatbeeliminates
Easily
installs
PC board wipingcan
Ideal,
inexpensive
solution
for grounding
applications
variety
of finishes
for galvanic
compatibility,
see page 1-11
Provides
for bi-directional
wiping
eliminatesapplications
snagging
Ideal, inexpensive
solution
forthat
grounding
High-performance
beryllium
copperofcan
be plated
with ain.wide
Designed for board
thicknesses
0.085
in. to 0.100
variety
Ideal,
inexpensive
solution
grounding
High-performance
beryllium
copper applications
canseebepage
plated
(2.159
mm to 2.540
mm)for compatibility,
of finishes
for
galvanic
1-11with a wide
finishes
for
galvanic
compatibility,
seethicknesses
High-performance
copper
can be
with
a wide17 and custom
variety
Designof
capabilities
available
toofhandle
other
Designed
for
boardberyllium
thicknesses
0.085
in.plated
to board
0.100
in.page
variety
of finishes
formm)
galvanic
compatibility,
seein.
page
1-11 in. (2.159 mm
applications
mm
tofor2.540
(2.159
Designed
board
thicknesses
of 0.085
to 0.100
Designed
for
boardavailable
thicknesses
of 0.085
in. to
0.100
in.
to97-983
ismm)
available
with D
Lance
option
2.540
Design
capabilities
to handle
other
board
thicknesses
and custom
(2.159 mm to 2.540 mm)
applications
Design capabilities available to97-973
handle other board thicknesses and
0.360 (9.144)
34
Design is
capabilities
available
handle
other board
thicknesses and custom
97-983
available
with
D to
Lance
option
0.173 (4.394)
custom
applications
applications
0.120 (3.048)
97-983
is
available
with
D
Lance
option
97-973
97-983 is available with D Lance option
0.208
(5.283)
0.300 Pitch
(7.620)
0.208
(5.283)
1G
Frequency (Hz)
1M
20
0.008
0.115(1.626)
(0.203)
0.020
0.030
(2.921)
(0.508)
(0.762)
0.183 (4.648)
0.035
0.020
(0.889)
0.008
(0.508)
0.115
(0.203)
VIEW A-A
(2.921)
0.035
0.183
(4.648)
(0.889)
(7.620)
0.300 Pitch
0.020 (0.508) Slot
0.030 (0.762)
(7.620)
20
0.6
0.20
0.25
0.4
0.5
0.6
0.3
0.15
0.20
0.25
0.4
0.5
0.2
0.10
0.15
0.20
0.3
0.4
0.1
0.05
0.15
0.10
0.2
0.3
0.0
0.00
0 5
10 15
0.1
0.2 Compression
0.0
0.1 0
10 15
Compression
0.0
0
5
10 15
Compression
20
25
30
35
40
45
50
55
60
% Deflection
20
2597-983
30 35
40
45
50
55
0.00
0.05
60
% Deflection
20
25
30
35
97-983
0.05
0.10
og
ae
dr()kilograms per finger)
L oad (kilograms per fLin
L oad (kilograms per finger)
A
Attenuation (
120
0.00
40
45
50
55
60
% Deflection
0.173 (4.394)
97-983
0.360 (9.144)
0.173 (4.394)
0.060 (1.524)
0.090(3.048)
(2.286)
0.120
0.375 (9.525)
0.077 (1.956)
0.115 (2.921)
All dimensions
shown are in inches (millimeters)
otherwise specified.
0.060 (1.524)
0.090unless
(2.286)
0.115 (2.921)
0.077 (1.956)
0.375 (9.525)
0.375 (9.525)
36
www.lairdtech.com
EMI ESSENTIALS
FINGERSTOCK
CLIP-ON PERPENDICULAR GROUNDING STRIP
Laird offers the first clip-on design which allows grounding to occur
between perpendicular surfaces.
Unique finger extension provides grounding from card or motherboard
to a backplane housing
Finger height provides wide operating range
Wide clip-on area with D lance gives additional reliable retention
Available in strip lengths up to 12.000 in. (304.800 mm)
Available in a wide variety of plating finishes, see page 17.
These 97-Series products are also available in UltraSoft, 98-Series.
0.295
(7.493)
100
100m
101
10m
102
1m
103
100
104
10
105
106
100n
107
108
10n
10K
100K
1M
10M
Frequency (Hz)
100M
0.020
(0.508)
1G
0.215
(5.461)
0.788
(20.015)
0.030 R
(0.762)
0.060 R
(1.524)
0.015
(0.381)
0.176
(4.470)
0.120 R
(3.048)
0.295
(7.493)
0.035
(0.889)
0.175
(4.445)
0.070
(1.778)
37
www.lairdtech.com
The Mini-Longitudinal Grounding Gasket is designed to accommodate small
applications which often require lower compression forces.
10K
100K 10
EMI ESSENTIALS
10n
10K
100K
100
1
100n
10n
1M
10M
Frequency (Hz)
1M
10M
Frequency (Hz)
100M
100M
1087
5
1G 10
1086
1G
107
108
1M
10M
Frequency (Hz)
100M
103
104
10
106
107
1G
108
0.788
0.060 R
(20.015)
(1.524)
0.176
(4.470) 0.060 R
0.176 (1.524)
(4.470)
100K
C onduc taCnocned(
1m
10K
10n
1
100n
ImpedancI e
10n
100n
10
0.176
(4.470)
(0.762)
(0.381)
(7.493)
(0.889)
0.120 R
0.030 R
(3.048)0.015 (0.762)
(0.381)
0.120 R
(3.048)
0.015
0.035
(7.493)
(0.889)
0.175
0.070
(4.445)
(1.778)
0.035
(0.889)
(0.381)
0.120 R
(3.048)
0.175
0.070
(4.445)
(1.778)
0.295
0.070
(1.778)
FINGERSTOCK
MINI-LONGITUDINAL GROUNDING GASKET
10K
100K
1M
10M
Frequency (Hz)
100M
1G
0.176
(4.470)
0.070
(1.778)
0.120 R
(3.048)
which oftensliding
requiremotion
lower over
compression
forces.
applications
Allows a longitudinal
the length
of the gasket
The Mini-Longitudinal
Grounding
Gaskettois accommodate
designed to accommodate
The Mini-Longitudinal
Grounding Gasket
is designed
small small
Allowsfora rack-mounted,
longitudinal
sliding
motion
over
the
length
ofdrawer
the gasket
Ideal
sliding
door
or
side
panel
and
assemblies
which
oftencompression
require lower forces.
compression
forces.
applications whichapplications
often require
lower
Ideal
for rack-mounted,
sliding
door or
side motion
panel
and
drawer
assemblies
Mounting
methods
include
conductive
tapes,
rivetsover
or screws
Allows
a longitudinal
sliding
of the gasket
Allows a longitudinal
sliding
motion over
the length
ofthe
thelength
gasket
Ideal
for rack-mounted,
sliding
oror
side
panel
Mounting methods
include
conductive
rivets
screws
Miniaturized
design
includes
extremely tapes,
narrowdoor
width
and
low and drawer assemblies
Ideal for rack-mounted, sliding door or side panel and drawer assemblies
standing height
Mounting
include
conductive
Miniaturized
design
includesmethods
extremely
narrow
widthtapes,
and rivets
low or screws
Mounting methods
include conductive
tapes, rivets ornarrow
screws
Miniaturized
standing height
Available
in a wide
variety of design
platedincludes
finishes,extremely
see page 17 width and low
standing
height
Miniaturized design
includes
extremely narrow width and low
Available in a wide variety of plated finishes, see page 17
standing height Available in a wide variety of plated finishes, see page 17
Available in UltraSoft low compression version (98-974).
Available in a wide variety of plated finishes, see page 17
Available in UltraSoft
low compression
version
(98-974).
Available
in UltraSoft low
compression
version (98-974).
100m
10m Impedance vs. Frequency
1m
100
10
1
100n
100K
100K
10n
10K 1M
100K
10M 1M
100M10M
Frequency (Hz)
Frequency (Hz)
10M
100M
1M
Frequency (Hz)
100M
1086
1G 7
10
97-974
97-974
Ol 0.056
(1.422)
100
1001
10
1021
10
10320
10
104
1031
105
1042
106
1053
10647
10
10587
10
1G
100
101
102
103
104
105
10
107
C onduc taCnocned(u
oCcho
tm
annsdcupece(tro
afn
hin
cme
gse(o
rp)h
em
r fsinpgeerr)finger)
100m
1
10m
100m
1m
1
10m
100
100m
1m
10
10m
100
1
1m
10
100n
100
1
10n
10
100n
10K
1
10n
10K
100n
ImpedancIm
ep
(oendeIam
nfip
cnegde(o
ar)nceefi(nogneer)finger)
97-974
97-974
108
1G
108
10n
All dimensions shown
in inches (millimeters)
unless100M
otherwise specified.
1Mareunless
10M specified.
1G
All dimensions10K
shown are in100K
inches (millimeters)
otherwise
Frequency (Hz)
All dimensions shown are in inches (millimeters) unless otherwise specified.
16.000 (406.400)
Ol 0.056
Ol 0.056
(1.422)
(1.422)
0.500 Pitch
(12.700)
16.000
(406.400)
0.090
16.000 (406.400)
(2.286)
0.500 Pitch (12.700)
Ol 0.056 0.090
0.500 Pitch (12.700)
0.090
(1.422) (2.286)
(2.286)
16.000 (406.400)
0.180
See Detail A
(4.572)
0.180
0.500 Pitch (12.700)See Detail A
0.090
(4.572)
(2.286)
0.180
See Detail A
(4.572)
0.500 Pitch
(12.700)0.500 Pitch
(12.700)
(Ref)
(Ref)
0.080
0.325
0.180
0.059
0.500 Pitch
0.080 A
See Detail
0.325
0.059
(2.032)
(8.255)
(4.572)
(2.032)
(1.499)
(8.255)
(12.700)
(1.499)
(Ref)
0.080
0.325
0.059
(2.032)
(8.255)
(1.499)
0.500 Pitch
(12.700) Full R (Typ.)
Ol
Ol
0.005 Full0.005
R (Typ.)
(Ref)
0.056 (Ref)
0.325
0.056 (Ref)
(0.127) (0.127) 0.080
0.059
(1.422)
(2.032)
(8.255)
(1.422)
(1.499)
0.005 Full R (Typ.)
DETAIL0.056
A Ol(Ref)
(0.127)
DETAIL A
(1.422)
0.005 Full
R (Typ.)
DETAIL
A
(0.127)
See Detail B
See Detail B
See Detail B
CL of 0.300 RAD
C
of 0.300 RAD
L(7.620)
(7.620)
See Detail B
CL of 0.300
RAD
0.286
(Ref)
45
0.286
(Ref)
45
(7.620)
(7.264)
(7.264)
(Ref)
R 0.300
45
R0.286
0.300
0.145
0.145
R
(3.683)
R 0.050
0.050 (3.683)
(7.620)
(1.270)
(1.270)
R 0.300
0.145
(7.620)
0.286 (Ref)
45
R 0.050 (3.683)
(7.264) DETAIL (1.270)
B
(7.620)
(7.264)
CL of 0.300
(7.620)
RAD
Ol
0.056 (Ref)
(1.422)
R 0.300
(7.620)
DETAIL A
DETAIL B
DETAIL R(1.270)
B0.050
0.145
(3.683)
DETAIL B
This series of beryllium copper strips combines finger compression with the
direction of motion in the longitudinal axis.
Ideal for use with rack-mounted and slide drawer assemblies
Provides reliable and complete grounds
Typical installation methods include hardware mounting or use of the
Sticky Fingers self-adhesive strip
97-975
1.250
(31.750)
0.380
(9.652)
0.100 typ
(2.540 typ)
0.005
(0.127)
0.800
(20.320)
Double
Adhesive
Tape
0.210
(5.334)
0.070
(1.778)
0.600 Ref
(15.240)
1.250
(31.750)
0.110 Dia.
(2.794 Dia.)
are available in
98-Series.
0.300 Ref.
(7.620)
Smallest
Opening
38
UltraSoft (98-Series) products are available in the same lengths as the standard
(97-Series) products. Please refer to the appropriate standard product pages
for specific information. All UltraSoft products are also available in your
choice of finishes, see page 17.
www.lairdtech.com
FIGURE F
EMI ESSENTIALS
0.172 Pitch
(4.369)
0.047 Slot
(1.194)
FINGERSTOCK
CUSTOM STAMPING
0.157 Pitch
(3.988)
0.120
(3.048)
0.310
(7.874)
0.040 Slot
(1.016)
0.200 R.
(5.108)
90
0.940
(23.876)
0.906
(23.012)
0.660
(16.764)
0.020 R.
(0.508)
^ Contips
available
L
Laird's extensive product line solves hundreds of EMC problems. But each customer problem is unique.
One of our standard products may not precisely meet your needs. Often a modest modification
in one of our existing products will solve your problem quickly, effectively and economically.
FIGURE G
Consider these modification possibilities:
Special finishes
Removal of fingers
0.340
(8.636)
0.3
(9.6
0.006
(0.152)
To Outside
0.110
(2.794)
97-320
0.130 R
(3.302
0.710
(18.034)
0.010
(0.254)
0.380
(9.652)
0.220 R.
(5.588)
0.250
(6.350)
97-410
0.075 Pitch
(1.905)
0.050
(1.270)
0.025 Slot
(0.635)
0.220
(5.588)
0.030 R.
(0.762)
0.840
(21.336)
Let one of our application engineers show you a full range of modified standard possibilities.
^ Contips available
97-330
Pitch
MALEMALE
RINGS
MALE RINGS
RINGS
0.075
RINGS
Contact strips are used
grounding
shielding
in high-frequency
Slot
Thefor
large
variety and
of sizes
and shapes
of contactequipment
rings
offers
engineers a wide FEMALE RINGS
FIGURE D Pitch
MALE
0.075
(1.905)
(1.905)
PitchPitch
0.030
~ ~~ 2. 100%
35
bond BB
~
and for forming large
diameter
contactdesign
rings.requirements for microwave
SERIES
SLOT SLOT
ID ID
REC.
MADE
Slot
choice
in meeting
cavities,
tuning,
0.025
(0.762)R.
SERIES PITCH
PITCH shielding
REC.
MADE
0.025
0.090
(0.635)
# OF
HOLE
FROM
0.060
(0.635)
Slot Slot
0.080 Spher. R.0.0500
# OF 3. Convex
HOLE portion of spring
FROM
(2.286)
0.010-0.020
and
grounding
applications.
Rings
are
made
from
strip
stock
formed
into
an
(2.032)
(1.524)
FINGERS
SIZE
STRIP
(1
FINGERS
SIZE
STRIP
A wide variety of beryllium copper contact strips provides engineers and
(1.270)
(0.254-0.508) R.
Spher.Sp
R
97-150
0.075 0.075
0.210
9 9
0.250
0.220
97-134
97-150 ring.
0.025
0.210
0.250
0.220
97-134
unclosed
circle which,
whenand
assembled,
complete
These0.025
rings
designers with flexibility
in solving
grounding
shielding becomes
problems.aVarious
0.130
(1.905)(1.905) (0.635)
(6.350)
(5.588)
(0.635) (5.334)
(5.334)
(6.350)
(5.588)
(3.302)
are furnished
in any
diameter,
greaterare
than
the minimum
shown in the chart
lengths, widths, thicknesses,
contours
and
hole locations
possible
for
BB
0.004
0.330
0.380
0.220
97-134
97-15197-151 0.075 0.075 0.0250.025
0.330
14 14
0.380
0.220
97-134
0.005
1.130
0.030 (0.102
0.030 Pitch
B B
below,
anditems
must.shown
containhere.
an integral number of fingers.
many of the standard
catalog
(0.762)(28.702
(0.127)
(0.635) (8.382)
(8.382)
(9.652)
(5.588) O.D.
(0.762)Slot
(1.905)(1.905) (0.635)
(9.652)
(5.588)
0.090 R.
0.130
(2.286)
I.D.
(3.302)
L
I.D.
FEMALE
RINGS
The
large variety
of sizes
shapes
rings offers
engineers
a,wide
0.780
0.450
0.500
0.220
97-134
described
the0.075
preceding
Most
configurations
are available
with
Contips
0.080 Spher. R.
For standard
finishes,
seeand
page
1-11.ofForcontact
load/deflection
data,
see page
2-33.
97-15297-152in0.075
0.0250.025
0.450
19 19Pitch
0.500
0.220
97-134
(19.812)
(2.032)
0.050 Spher. R. 0.030
(0.635) (11.430)
(11.430)CONTIPS
(12.700)
(5.588)
R.
CONTIPS
Slot
AVAILABLE
97-252 TO 255
choice in meeting design
requirements for microwave cavities,
tuning, shielding
(1.270)
(1.905)(1.905) (0.635)
(12.700)
(5.588)
(0.762)
CONTIPS AVAILABLE
AVAILABLE
B
0.660
section.
0.090
(16.764)
0.060
These
97-Series
products
are
also
available
in
UltraSoft
low
compression
0.070
0.050
(2.286) 97-134
0.530
0.010-0.020
0.075 0.025
0.025
0.690
0.750 (1.524)
0.220
and grounding applications. Rings are made from strip stock formed into an
available
(1.778
(1.270)
97-15397-153 0.075Contips
0.690
29 29
0.750
0.220
97-134
(13.462)
(0.254-0.508) R.
0.090
0.050 0.090
0.090 R. 0.310 0.380
force 98-Series.
(1.905)
(0.635)
(17.526)
(19.050)0.040 (5.588)
with (1.270)
Available
in standard
finishes,
see page
1-11.
(2.286)
L
Not available
0.470
(2.286)
0.310 9
R.
0.300 0.340
(1.905)
(0.635)
(17.526)
(19.050) (1.016)(5.588)
unclosed
circle which,
when assembled,
becomes
a complete
ring.
These rings
(9.652)
(2.286)
0.030
(7.874)
0.080
(2.0
0.180
(11.938)
0.130
0.006
(7.874) 0.030
97-2
(7.620) (8.636)
0.150(3.302) 0.006
0.08R
(0.762) R. R. 0.010
Contips
Sphere
(0.152)
(4.572)
97-154
0.075
0.025
0.950
40 0.060 1.000 0.004
0.220
97-134
(0.762) (0.254)
0.090
are
furnished
in the
anyFingerstock
diameter, greater
minimum
shown
in the
(3.810)
Sp
R.
(0.102)
(0.152)
97-154
0.075
0.025
0.950
40
1.000
0.220
97-134
B
Please
reference
Gasketsthan
and the
Metal
Grounding
Catalog
forchart
a complete
0.080 (2.032)
0.050
(1.905)
(0.635)
(24.130)
(1.524) (25.400)
(5.588)
(2.286)
0.020 Sphere
0.005
0.030
0.080 R.
(2.032)
0.050
(1.270)
0.030
(25.400)
(5.588)
FEMALE
RINGS
below,
must Strips
contain
integral
number
of fingers.
R. (0.127)
97-223
97-1360.050
97-137
0.780 97-134
listing ofand
Contact
andanContact
Rings,
including
part numbers and dimensions.97-155 (1.905)0.075 (0.635)0.025 (24.130)
(0.508) R. Sphere R.
(0.762)
0.0509
O.D.
(1.270)
0.660 (19.812)
1.450
61
1.500 (0.762)
0.220
97-134
0.780
(1.270)
(1.270)0
0.380
(16.764)
0.660 (19.812)
0.130
0.270
0.075
61
1.500
0.220
97-134
0.050
SERIES
PITCH
SLOT , described
OD
REC. 97-155 B
MADE
SMALL
(9.652)
Spher.
R.
(1.905) 0.025
(0.635) 1.450
(36.830)
(38.100)
(5.588)
(3.302)
(1
0.380
Most configurations are
available
with Contips
in~the preceding
0.090(16.764)
(6.858) 0.220
(1.270)
0.280
0.050
0.310 (9.652)
# OF
PIN
FROM
DIA. FROM (36.830)
(2.286)
(1.905)
(0.635)
R.
(38.100) FIGURE
(5.588)
0.190 E
0.090
(5.588)
0.190 (1.270) (7.874)
0.030
(7.112)
section.
(4.826)
97-156 CONTIPS
0.075 AVAILABLE
0.025
1.950
82 0.500 2.000
0.220 R. 97-252
97-136 TO 255
0.310
(2.286)
FINGERS
DIAMETER
STRIP
STRIP
0.310 (0.762)
(4.826) 0.006
97-156
0.075(1.905) I 0.025(0.635)
0.980
0.234 FIGURE
97-135
0.570
(1.905)
(0.635)
0.180
97-192
0.075
0.025
(24.892)
(5.944)
(14.478)
(4.572) 0.060
R.
97-192
0.075(1.905) 0.025
(0.635)
97-072
0.135
0.040
1.000
23
0.790
0.234
97-135 (1.524)
0.570
(1.905)
(0.635)
FEMALE RINGS
97-205
0.094
0.031
(3.429)
(1.016)
(25.400)
(20.066)
(5.944)
(14.478)
(2.388)
(0.787)
0.270
97-205
0.094
0.031
SERIES
PITCH
SLOT
OD
~
REC.
B
MADE
SMALL
97-074
0.135 # OF 0.040 PIN 0.875
20FROM
0.672FROM 0.234(6.858)97-135
0.570
0.220
DIA.
Laird offers an addition
to our
connector
gasket
line, part
number
97-787,
97-215 (2.388)(5.588)
0.094R. (0.787)
0.031
0.500
DIAMETER
STRIP
(3.429)FINGERS(1,016)
(22.225)
STRIP (17.069)
(5.944)
(14.478)
(12.700)
0.165 Pitch
(2.388)
which
to fit all
IEEE 1394
horizontal
connectors.
from 0.094
97-215
0.031(0.787)
(4.191) Made
97-070 is designed
0.135
0.040
1.219
28
0.980
0.234
97-135
0.570
0.050
97-076
0.163
0.020
0.640
12
0.340
0.250
97-340
0.640
(2.388)
(0.787)
(1.270)
97-241
0.060
0.020
(3.429)
(1.016)
(30.963)
(24.892)
0.040 Slot(5.944)
R and(14.478)
0.080
copper beryllium,
these gaskets
reduce
(4.140) provide
(0.508)superior
(16.256)grounding
0.050
(8.636)
(6.350)
(16.256)
0.008
(1.016)
(1.270)
(2.032)
(1.524)
(0.508)
(0.203)
97-241path 0.060
0.020
97-072
0.135
1.000 by providing
23
0.790
0.234
97-135grounding
0.570
emissions
from the0.040
connector
a
low-impedance
0.090
Spher.
R.
97-140
0.075
0.025
0.290
12
0.250
0.220 (1.524)
97-134 (0.508)
0.200
(2.286)
(3.429)
(1.016)
(25.400)
(20.066)
(5.944)
(14.478)
97-76
0.550
0.050
(0.635)
(7.366)
(6.350)
(5.588)
(5.080)
from the connector shell to(1.905)
the faceplate.
(13.970)
(12.700)
1.950
82
2.000
(49.530)
(50.800)
Pitch
(49.530) 0.050Slot
(50.800)
0.220
97-136
(5.588)
0.010
(5.588) (0.254)
0.060
97-136
(1.016)
1.219
(30.963)
28
FIGURE A
97-074
0.135
(3.429)
0.040
97-141
(1,016)
(1.905)
(0.635)
97-185
0.030
(11.430)
0.500
0.500
(12.700)
0.890
30
(0.762) R.
(22.606)
0.890
30
0.190
(22.606)
1.240
(12.700)
1.000
97-76
(25.400)
1.000
0.130
(3.302) 0.280
(7.874)
0.310
0.090
(2.286)
0.010
(7.874) 0.004
(0.254)
Pitch
(0.102)0.010
(0.254)
Slot
0.000
-0.0300.090
0.060
97-136
(1.524)
(0.000-0.762)
(2.286)
(1.524)
0.020 R.
0.310
97-137
(0.508)
0.050
97-422
TO
(1.270)
(7.874)
0.310R.
97-137
Spher.
B 0.030 R.
424
(0.762)
0.030
0.160
(4.064)
R.
(7.874)
(0.153)
0.006
97-205
97-205
0.006
(0.153)0
(0.153)
(0
97-192
97-192
97-381
0.160
(4.064)
(25.400)
(7.874)
(0.762)
0.190
(7.112)
R. 42
1.500 L0.030
0.310 0.130
97-139
0.187
Pitch
0.050 (1.270)
(4.826)
0.050
0.006 0.030 R.
(4.826)
(0.762)
0.160
(4.750)
L 0.090
0.110
0.200(0.153) (0.762)
(31.496)
(38.100)
(7.874)
0.090 0.030 (1.270)
0.090 Spher.
R. (3.302)
1.240
42(2.794)
1.500
0.310
97-139
0.200
(4.064)(2.286)
(5.080)
0.050 (1.270)
0.060
R.
0.050
0.006 0.030 R
(2.286) 0.080
0.047 Slot 0.010
(2.286)
(0.762)
(2.032)
0.030
(5.080)
0.004
0.030
(1.524)
(1.270)
R.
(0.153) (0.762)
(1.194) (0.254)
(31.496)
18
(38.100)
(7.874)
R.
0.340
0.380
0.130
97-223
(0.762)
(0.102) 0.090
0.440
0.050
0.200
0.090
(0.762)
0.030 R. Sphere R.
0.380 (1.270)
(11.176)
(2.286)
(0.762) 0.080 (2.032)
(2.286) R. 0.140 R. (5.080)
0.270
0.000
-0.030
(8.636)
(9.652)
(3.302)
0.200
0.017
0.250
(9.652)
(3.556)
(0.000-0.762) 18
0.340
0.380
0.130
97-223 (5.080) (6.858)
Sphere R.(0.432)
0.440
0.030
0.090
(6.350)
0.0060.050
0.020with
R.
Not
available
R.
0.380
(11.176) 0.410 (0.762) R.
0.200
(1.270)
(2.286)
(0.508)
(0.153)
(8.636)0.080
(9.652)
(3.302)
0.010
0.090 R.
R 0.063
R (5.080)
(10.414)
0.170
97-422 TO 424
97-381 (0.254)
0.030 (1.600)(2.286) (9.652) 0.006
Contips
0.890
0.050 R
(2.032)
R.
0.050 Spher. R.
0.280 (4.318)
0.450
(1.270)
(0.762)
0.630
(1.270) .
(22.606) 0.130 R.
0.875
20
0.672
0.234
97-135
0.570
(0.153)
0.030
0.270
Spher. R.
(1.270)
0.010(7.112)
0.270
(11.430)
0.440
(16.002)
(0.762)
(3.302)
(6.858)
0.075 0.025(17.069)0.440(5.944) 18 0.190 0.380
0.220
0.200
97-185
Contips available
0.014 97-215
(22.225)
0.005 97-134
(11.176) (0.254)(6.858)
(4.826) (14.478)
0.180
0.160
0.110
(0.356)
0.090
0.090
(0.127)
0.080 Spher. R.
0.090
(4.572)
(1.905)
(0.635)
(11.176)
(9.652)
(5.588)
0.190
(4.064)
0.030
R.
(2.794) (5.080)
0.030
(2.286)
(2.032)
(2.286)
0.030
0.640
12
0.340
0.250
97-340
0.640
(4.826)
0.420
(2.286)
97-215 0.080
97-185
0.030
(0.762)
(0.762) 0.010
R.
0.090
(10.668)
0.005
0.006 (0.762)
(0.762) R.
Max (0.254)
0.409
0.075 0.025L (8.636) 0.550(6.350) 23
0.500
0.200
(16.256)
(16.256) 0.220(2.286) 97-134
0.1400.130 0.0100.090 (0.127)
0.006
(2.032)
(0.153)
R 0.167
(10.388)
0.030
R.
(0.154)
(2.286)
(3.556)
(3.302)
0.100
(4.242)
0.004 (0.102)
(1.905)
(0.635)
(13.970)
(12.700)
(5.588)
(5.080)
(0.254)
(0.762)
L
0.290
12
0.250
0.220
97-134
0.200
0.410
(2.540)
0.200
0.010
0.080
(10.414)
(5.080)
(7.366)
(5.080)
(0.254)
97-117 0.280
97-300
0.030
0.110
0.160
0.075 0.025(6.350) 0.800(5.588)
33
0.750
0.220(2.032)97-134
0.200
0.050 R
97-361
97-420
(0.762)
(4.064)
(1.270) . 97-216
(2.794)
0.270
Spher. R.
(7.112)
0.080
0.440
(1.905) 18 (0.635) 0.380(20.320)
(5.080)
0.130
(6.858)
0.440
0.220 97-134 (19.050)
0.200 (5.588)
0.014
(2.032)
(11.176)
(3.302)
97-380
97-360
97-139
(0.356)
0.090
0.090
(11.176)
(5.080)
0.075 0.025(9.652) 0.560(5.588) 23
0.500
0.060
0.200
(2.286) R.
97-1
97-313
(2.286) 97-136
0.080
0.006
0.090
0.090
(1.905) 23 (0.635) 0.500(14.224)
(5.080)
0.550
0.220 97-134 (12.700)
0.200 (1.524)All dimensions
0.130unless
shown
are in inches (millimeters)
(2.032)
(0.153)
(2.286)R.
0.010otherwise specified.
0.030
0.040
(3.302) (0.254) (2.286)
0.100
(13.970)
(12.700)
(5.588)
(5.080)
(0.762)
(1.016)
(2.540)
0.094
0.031
1.040
34
1.000
0.310
97-137
0.460
0.130
0.170
(3.302)
0.050
0.187
Pitch(7.874)
0.187 Pitch
(4.318)R.
0.800
33 (0.787) 0.750(26.416)
0.220 97-134 (25.400)
0.200
(2.388) Fingers
97-361
97-216
97-420
(1.270)
Fingers (11.684)
(4.750)
(4.750)
0.030
0.1300.050
R.
0.780
(20.320)
(19.050)
(5.588)0.470 Slot
(5.080)
Opposite
Opposite
0.470 Slot 0.150
(0.762)
(1.270)
R.0.060
0.430
(3.302)
0.060
R.
R.
0.094
0.031
1.240
41
1.000
0.300
97-139
0.940
(19.812)
(3.810)
(1.194)
FLAT
STRIP
(1.194)
0.090
Spher. R.
0.280
(10.922)
(1.524)
(1.524)
0.340
0.560
23
0.500
0.060
97-136
0.200
The gasket is mounted over the top of a horizontal IEEE 1394 connector and
97-076
0.163
0.020
soldered
to the board.
Contact with both the faceplate and the connector
97-142
(4.140)
(0.508)
shell
is
accomplished
once the board is assembled into its housing. These
97-140
0.075
0.025
gaskets can
(1.905)be provided
(0.635)
97-143 in trays to facilitate pick-and-place assembly onto
97-141
0.025 soldering automation.
the
board0.075
and wave
97-142
0.075
0.025
B
FIGURE
Accommodates
a97-204
wide range of connector protrusion positions
(1.905)
(0.635)
97-786
97-787
FINGERSTOCK
LOAD DATA
Simple thru-pin
mounting method
FINGERSTOCK
LOAD
Grounds
theDATA
connector
to the this
faceplate
necessary
to close
gasketed
joints. Toward
end, Laird Technologies has
0.075
0.025
97-143
Fits all(1.905)
IEEE 1394
horizontal connectors
(0.635)
DEFINITIONS:
Largestheight
opening
the height
whichmaximum
contact dev
forc
Efficient
enclosure
design requires
an understanding
the compression
force
Design
is theis height
whichatallows
developed
the following
indicating
compressionofforces
required to achieve
97-185
Gasket 0.075
can be placed
onto
the printed
circuit
boardvia pick-and-place
Available
in charts
a (7.112)
variety
of plating
finishes
0.025
(2.286)
(2.388)
(0.787)
(31.496)
(25.400)
(7.620)
(23.876)
0.660
This
is recommended
most cases.
for
reliable
shielding
performance.
optimum
gasket
performance
fromToward
each ofthis
our end,
fingerstock
gaskets. FIG.
Loads
arePITCH
necessary
to close
gasketed
joints.
Laird
Technologies
has
0.300 (8.636)
0.090
SERIES
SERIES
SLOT
B(16.764) in
APPROX.
APPROX. NO.
0.090
0.300
(1.905)
(0.635)
(14.224)
(12.700)
(1.524)
(5.080)
0.018
R.
(7.620)
0.220
(2.286)
(2.286)
(7.620) Smallest opening is the
(L) which
OF FINGERS
0.040
(0.457)
smallest
height
whichmaximum
precludes
pounds
per linear
foot (or
as kilograms
per
linear meter).
97-204
Packaging
to accommodate
high-speed
is 28
optional
97-232
0.060
0.020 assembly
0.540
0.500
0.130 expressed
97-233
0.160 charts
Design0.310
height is theLENGTH
height
allows
developed
the in
following
indicating
compression
forces
required
to achieve
(5.588)
(1.016) 0.140
0.250
0.004
0.094
0.031
1.040
34
1.000
0.310
97-137
0.460
97-117
97-105
B
0.187
0.047
16.000
86
0.170
R
(3.556)
(1.524)
(0.508)
(13.716) R
(12.700)(6.350)(3.302)
(4.064)
(0.102)
R. gasket performance
0.630
0.780 This is(7.874)
0.050
in most cases.
from
each of
oursteel
fingerstock
gaskets.
Loads
are(4.750)
(4.318)
0.080
(2.388)
(0.787)
(26.416)
(25.400)
(7.874)
(11.684) optimum
0.005
0.080
Load
Tests: Bare BeCu mated
against
mild
having
a
ground
surface,
(1.194)recommended
(406.400)
(16.002)
(1.270)
(19.812)
0.010
0.050
(0.127)
(2.032)
SHIELDING
EFFECTIVENESS
0.780
(2.032)
0.150 0.450per linear
97-252 1.2400.127 41 0.050 1.000 1.2500.300 3197-139 1.090
0.090 roughness
97-251
Smallest
opening
is the
smallest height
which preclu
expressed
in pounds
footmm).
(or as kilograms
per
linear meter).
(0.254)
R. 0.430
approx.
16 m in.(1.270)
(0.4
97-216
0.094
0.031
0.940
97-135
97-110
C (19.812) 0.187
0.047
0.590
16.000
86
(3.810)
97-216
(3.226) (1.270)(25.400)(31.750)
(31.496)
(7.620)
L
(2.388)
(0.787)
0.060
(1.524)
97-252
0.127
(3.226)
0.050
97-255 1.2500.127 31 0.050 1.090 0.6500.090 1697-251
(1.270)
(31.750)
(2.286)
(3.226) (1.270)(27.686)(16.510)
97-254
0.127
(3.226)
0.050
97-361 0.9100.075 22 0.025 0.740 1.0100.090
(1.270)
(23.114)
(2.286)
(1.905) (0.635)(18.796)(25.654)
(3.226)
0.050
0.650
16
0.480
0.090
97-381
0.060
0.020
1.210
0.098
(1.270)
(16.510)(2.489)
(12.192)
(2.286)
0.075
(1.905)
0.025
1.010
97-420 (25.654)
0.190
(0.635)
FIGURE
C
97-255
0.127
97-361
97-381
97-420
0.060
(1.524)
0.190
(4.826)
97-421
0.100
(2.540)
97-725
97-422
0.154
0.095
(2.413) (3.912)
97-423
97-787
(1.524)
(4.826)
(0.508)
(30.734)
0.187
Pitch (4.750)
42
-
0.840
0.220
0.500(5.588)
(21.336)
0.0470.075
Slot (1.194)
(1.905)
0.060 R.
(12.700)
(1.270)
(12.700)
0.020
1.210
63 (1.524) 1.060
0.130
0.157
97-421 (30.734)
0.100
R. 0.050(26.924)0.500
(0.508)
(3.302)
(3.987)
TOP0.075
VIEW
(2.540)
0.500
97-422 (12.700)
0.154
(1.905)
8
0.320
0.060
0.059(8.128) 0.600
(1.524)
L
4297-251
97-251
63
97-360
97-380
0.437
15
(11.100)
N/A
12
(1.499) 0.370(15.240)
N/A
0.050
15
0.070
0.158
(1.270)
0.059(9.398) 0.780(1.778) 15
(4.013)
97-423 (12.700)
0.154
(3.912) 12 (1.499) 0.370(19.812)
0.059
0.600
0.250 N/A
(3.912)
0.500
0.130
0.370
N/A
0.550
(12.700) 0.250
(3.302)
110
0.130
0.090 slide-on
Unique
0.080
Height
(3.302)
100
(9.398)
(6.350)
(13.970)
(2.286)
(2.032)
0.440
0.230
A97-723
(5.842)
(11.176)
0.540
(13.716)
0.550
0.250
120
(6.350)
90 97-070,
072,0.030
074
0.040
(1.016)
0.198
(5.029)
(26.670)
0.138
(3.505)
0.069
0.059
(1.753)
0.810
(20.574)
0.405
(10.287)
0.230
(5.842)
N/A
1.332 0.870
(33.833)
0.005
(22.098)
(0.127)
0.540
(13.716)
0.646
0.118 0.015 R.
(2.286)
(2.997)(0.381)
0.090
design
for ease (2.286)
of
assembly
0.080
(2.032)
0.090
(2.286)
45
0.060
0.920
(7.874)
(1.524)
(23.368) finishes,
Available
in a wide variety
of plated
see page 17
0.503
0.890
0.135
(3.429)
0.138
(3.505)24
0.090
0.340
0.310
(13.970)
110 R. 70
0.090
0.154
(3.912)
0.810
(20.574)
1.050
Spher. R.
0.090 R. equipment
(0.762)
N/AGrounds
circuit boards, as well as keyboards and audio
0.550
80
(2.286)
0.130 R.
(1.499)
(6.350) 24
(13.970) 0.230100
(2.286) 60
0.306 0.040(9.398) 1.050
97-424 (15.240)
0.135
N/A
0.870
0.130 R.
(3.302)
0.0500.810
(7.772)
50
(3.302)
(3.429) 15 (1.016) 0.540(26.670)
(20.574)
0.059
0.780
0.250 N/A(1.270)
0.550 (5.842)900.280 0.250 R.(22.098)
97-725
(6.350) 0.890
0.770
0.006
(22.606)
(1.499)
(19.812)
(13.716)
(6.350)
(13.970) (19.558) 80(7.112)0
www.lairdtech.com
97-424
97-105
Attenuation (dB )
(10.922)
(11.430)
(4.750)
(1.194)
(14.986) 97-204
(406.400)
0.660 0.190
(4.826)
L
(8.636)
97-421
97-232
0.300 steel
LoadSAMPLE
Tests:
BeCu
mated
mild
having(2.286)
a ground (16.764)
surface,
0.018 Bare
compression.
TheEFFECTIVENESS
graph below shows finger gaskets te
LOAD
CHART
FOR against
EMI GASKETS
(7.620)
SHIELDING
0.090 (0.457)
97-251
0.450
97-221
97-111
C
0.187
0.047
0.630
16.000
86
0.130
R.
0.310
roughness
16 m in. (0.4
0.004mm).
PART NO. approx.
LARGEST OPENING
DESIGN HEIGHT
SMALLEST OPENING
heights.
about
10 dB, which
is typical
(3.302)
(4.750)
(1.194) Variation
(16.002)is only(406.400)
(2.286)
(11.430)
(7.874)
(0.102)
Shielding
effectiveness
of fingerstock
gaskets
does
0.080
0.080
HEIGHT
LOAD
HEIGHT
LOAD
HEIGHT LOAD97-786
HEIGHT
LOAD HEIGHT LOAD
gaskets.
Compression
of
a
finger
gasket
beyond
desig
0.010
SIDE
VIEW
(2.032)97-115
(2.032)
97-251
97-112
C
0.187
0.047
0.570
16.000
86
compression. The graph below shows finger gasket
SAMPLE
LOAD
CHART
EMI GASKETS
0.450
0.480
0.090
97-251
0.450
0.027R LB/FT
(0.254)LB/FT
INCHES
LB/FTFOR
INCHES
LB/FT
INCHES
INCHES
INCHES LB/FT
benefit
but(406.400)
can complicate enclosure des
(0.686)
(4.750)
(1.194)performance,
(14.478)
(11.430) (2.286)
(12.192)
(11.430)
PART NO. LARGEST
OPENING
HEIGHT
SMALLEST
OPENING
heights.
Variation
is only
about 10 dB, which is typi
(MM)
(KG/M)
(MM)
(KG/M) DESIGN
(MM)
(KG/M)
(MM) to
(KG/M)
(MM)
(KG/M)
97-421
97-232
97-204
Lairds
DIN
Connector
Gasket
Series
is
designed
ground
connector
C
0.187
0.047
0.630
86
HEIGHT
LOAD
HEIGHT
LOAD
HEIGHT LOAD HEIGHT97-113
LOAD HEIGHT
LOAD
0.450
gaskets.
Compression
of16.000
a finger gasket
beyond97-300
d
0.840
0.220 97-951
97-360
0.195 0.610
20
0.170
36
0.150
440.118 0.125
62
0.100
92
GROUNDING
STRIPS
(4.750)
(1.194)
(16.002)
(406.400)
plugs
to(15.494)
the
chassis
of electronic
systems.
Manufactured
in beryllium
(11.430) (5.588) INCHES
INCHES
LB/FT
(2.997)
(4.953)LB/FT
(30) INCHES
(4.318) LB/FT(53) INCHES
(3.810)
(65)
(3.175) LB/FT
(92) INCHES
(2.540)
(137)
(21.336)
0.187 LB/FT
benefit
performance,
but
can
complicate
enclosure
Some
fingerstock
products
are
used
as
grounding
strips,
0.281 excellent
97-310
97-114
C
0.187
0.047
0.650
16.000
86
(4.750)
0.031
copper,(KG/M)
these (MM)
connector
provide
conductivity
and
(MM)
(KG/M)gaskets
(MM)
(KG/M)
(MM)
(KG/M)
(MM)
(KG/M)
0.450
0.027R
(7.137)
(0.787)
carrying
1.060
0.130
97-380 (0.686)
0.460
(4.750)
(1.194) RF current.
(16.510) Because
(406.400)these products are basica
(11.430)
shielding
97-951 0.195
20 characteristics.
0.170
36
0.150
62
0.100
92
GROUNDING
STRIPS
(26.924)
(3.302)
(11.684)
0.010 440.110 0.125
expressed
as afunction
of deflection
hei
Load
97-313
97-115
B
0.187
0.047
16.000
86 rather than
Free Position(30)
(0.254) (65)
(4.953)
(4.318)
(53)
(3.810)
(92)
(2.540)
(137)
(2.794)(3.175)
0.610
Some
fingerstock
products
(4.750) plugs
(1.194)
Attenuation (dB )
97-232
(0.152)
10K
Thick 70
0.200
60 R.
(5.080)
50
0.005
(0.127)
0
10K
0.150 TYP.
(3.810)
PART
NO.
97-116
0.060 R. (1.524)
S MAL L(KG/M)
ES T
(MM)
DEFL ECTION
(MM)
(12.776) 0.920
97-116
0.010
0.130 R. (22.606)
0.890
0.015 R.
Free Position
(23.368) 0.770
(3.302)
(22.606)
0.005 R.
(0.381)
97-723
(0.254)
(19.558)
(0.127)
0.590
100K
1M
10M
100M
0.660
0.630 1G
0.660
(14.986)
(16.764)
(16.002)
(16.764)
Frequency (Hz)
0.570
0.008 Thick
0.005
Shielding
Effectiveness
vs. Compression
0.005
(14.478)
0.005
0.128
0.005
(0.203)
(0.127)
(0.127)
0.495
(0.127)
(0.127)
(3.251)
(12.573)
Free Position
0.188
0.150
0.032
100K
1M
10M
(4.775) 97-112(3.810)
(0.813) 97-114100M
97-113
97-110
All dimensions shown97-111
are in inches (millimeters)
unless otherwise
0.295 specified.
Frequency (Hz)
97-116
0.032
1G
(MM)
(KG/M)
(MM)
(KG/M)
(MM)
0.010
11
0.020
22LOAD 0.035
DEFLECTION
LOAD DEFLECTION
DEFLECTION44 LOAD0.045
DE
(0.254)
(16)
(0.508)
(33)
(0.889)
(65)
(1.143
INCHES
LB/FT
INCHES
LB/FT
INCHES
LB/FT
I
39
(KG/M)
(MM)
(KG/M)
(MM)
(KG/M)
11
(16)
0.020
(0.508)
22
(33)
0.035
(0.889)
44
(65)
(4.572)
0.810
(20.574)
0.198
(5.029)
0.250
(6.350)
0.069
(1.753)
EMI ESSENTIALS
0.115
(2.921)
0.210
(5.334)
0.062
(1.575)
0.606 Dia.
(15.392)
0.500
(12.700)
1.101
(27.965)
1.277
(32.436)
0.150
(3.810)
FINGERSTOCK
USB CONNECTOR
*97-725 is available without the formed bends or with bends of varying sizes to accommodate your requirements for a
variety of connector sizes.
Laird offers the USB (Universal Serial Bus) Type B connector gasket.
The unique design easily snaps onto the connector prior to placement on the
printed circuit board and fits all Series B USB right angle connector brands.
Made from high performance beryllium copper, these gaskets provide superior
grounding characteristics and enhances the shielding of the connector due to
the short electrical path to the ground plane provided when the gasket makes
contact with the connector.
Gasket easily snaps onto the connector for a secure fit
Connector/gasket assembly can be placed onto the board via pick-and-place
High clip force attaches clip to connector body for good electrical contact
and secure transport prior to soldering
Once the shielded connector assembly is soldered to the PCB, the shield is
captivated between board and connector and provides reliable contact
between the connector and faceplate
97-728
Simple compact design fits within 0.625 in. X 0.625 in. (15.875 mm X
15.875 mm) windows
RIGHT SIDE
FRONT
0.625
(15.875)
0.394
(10.007)
0.448
(11.379)
0.305
(7.747)
Laird provides fiber optic shielding, which provides excellent EMI shielding
around the faceplate aperture which houses board mounted fiber optic
TOP
transceivers. This EMI shield easily fits over the industry standard 1 x 9 style
fiber optic transceiver with a duplex SC connector. The shielded transceiver
is then inserted into the faceplate.
0.008 Thick
(0.203)
0.511
(12.979)
0.240
(6.096)
0.160
(4.064)
0.030
(0.762)
0.040
withall
97-727
optic shield.
Fits
1 xfiber
9 style
fiber optic transceivers with duplex SC connectors
95-702
95-702
Laird offers the GBIC Shield for reducing emissions from GBIC
(GigaBit Interface Converter) fiber optic transceivers. Fiber optic transceivers
can be a troublesome source of EMI because they emit high-frequency signals
and are located adjacent to large apertures in the enclosure. The GBIC Fiber
Optic Shield assembly reduces the radiated emissions from the transceivers
by conducting interference current away from the transceiver and onto the
enclosure surface.
Laird
offers
the GBIC
Shield
for reducing
emissions
GBIC the two shield
Simple
assembly
of the
shield
is accomplished
by from
snapping
(GigaBit
Interface
Converter)guide
fiber rail
opticassembly.
transceivers.
Fiberis optic
halves onto
an uninstalled
The rail
then transceivers
mounted onto
can
a troublesome
source
of EMI
because
they emit high-frequency signals
the be
printed
circuit board
in the
normal
fashion.
and
arefinger
located
adjacent
to large
apertures
the shield
enclosure.
The grounding
GBIC Fiber for
Spring
design
on both
halves
of the in
GBIC
provide
Optic
Shieldofassembly
reduces
the radiated
emissions
from thehalf
transceivers
both sides
a transceiver
module.
In addition,
the bottom
fingers can
by
conducting
current away
the transceiver
and onto
the
provide
a low interference
impedance connection
to from
the circuit
board ground
plane.
enclosure surface.
Fits most
Tyco (AMP)
Methode
guide railsbycommon
to the
routers,
Simple
assembly
of the and
shield
is accomplished
snapping
two switches
shield
and other
network
hardware
halves
onto an
uninstalled
guide rail assembly. The rail is then mounted onto
the
printed no
circuit
in theholes
normal
Requires
extraboard
mounting
or fashion.
solder
Spring
fingerin design
onsteel
bothfor
halves
the GBIC
shield provide grounding for
Provided
stainless
highofgalvanic
compatibility
both sides of a transceiver module. In addition, the bottom half fingers can
Simple snap-on assembly
provide a low impedance connection to the circuit board ground plane.
HOW
TO ORDER:
Fits most
Tyco (AMP) and Methode guide rails common to routers, switches
40
www.lairdtech.com
HOW TO ORDER:
EMI ESSENTIALS
FINGERSTOCK
D CONNECTOR SHIELDING/SLOTTED D
D CONNECTOR SHIELDING
Laird offers the D Connector Shield Series for grounding and shielding of
D Subminiature Connectors. This series is designed to fit most commonly
used 9 pin through 68 pin connectors.
Available in stainless steel and beryllium copper, conductive elastomers,
oriented wire and other materials
Improved 20 degree angle flange design on metal connectors:
- provides continuous contact for increased shielding effectiveness
- fills gaps and adjusts for irregularities in the flatness of the
mounting surface
Beryllium copper parts available in UltraSoft low force version and
available in a wide variety of finishes, see page 17
Custom shapes and designs also available
Versatile front or rear mounting
The slotted D connector gaskets provide shielding for most 9 through 50 pin
connectors. The separate finger design provides maximum surface contact,
provides high shielding effectiveness and low compression forces.
Slotted D connector gaskets are available from stock in copper beryllium and
stainless steel. Copper beryllium parts can be plated to a variety of finishes
for galvanic compatibility, see page 17.
D CONNECTOR SERIES DIMENSIONS FOR BECU AND STAINLESS STEEL
SS
BeCu
# PINS
D CONNECTOR SERIES
G
97-768
97-778
1.410
(35.814)
0.980
(24.892)
0.780
(19.812)
0.220
(5.588)
0.440
(11.176)
0.690
(17.526)
0.130
(3.302)
97-769
97-779
15
1.740
(44.196)
1.310
(33.274)
1.110
(28.194)
0.220
(5.588)
0.440
(11.176)
0.690
(17..526)
0.130
(3.302)
97-770
97-780
25
2.280
(57.912)
1.850
(46.990)
1.650
(41.910)
0.220
(5.588)
0.440
(11.176)
0.690
(17.526)
0.130
(3.302)
97-771
97-781
37
2.930
(74.422)
2.500
(63.500)
2.290
(58.166)
0.220
(5.588)
0.440
(11.176)
0.690
(17.526)
0.130
(3.302)
97-772
97-782
50
2.840
(72.136)
2.410
(61.214)
2.110
(53.594)
0.280
(7.112)
0.550
(13.970)
0.800
(20.320)
0.240
(6.096)
97-773
97-783
68
1.800
(45.720)
1.480
(37.592)
1.260
(32.004)
0.080
(2.032)
0.160
(4.064)
0.400
(10.160)
0.090
(2.286)
0.004
(0.102)
DConnector
Shield
A
B
C
F
D
E
0.025
(0.635)
.20
(Ref.)
TOP VIEW
RIGHT VIEW
BeCu
# Pins
Pitch
95-822
97-822
1.412
(35.865)
0.984
(24.994)
0.784
(19.914)
0.220
(5.588)
0.440
0.690
(11.176) (17.526)
0.160
(4.064)
0.718
(4.521)
95-823
97-823
1.412
(35.865)
0.984
(24.994)
0.784
(19.914)
0.180
(4.572)
0.360
0.690
(9.144) (17.526)
0.160
(4.064)
0.178
(4.521)
95-825
97-825
15
1.740
(44.196)
1.312
(33.325)
1.112
(28.245)
0.180
(4.572)
0.360
0.690
(9.144) (17.526)
0.160
(4.064)
0.175
(4.445)
95-824
97-824
15
1.740
(44.196)
1.312
(33.325)
1.112
(28.245)
0.220
(5.588)
0.360
0.690
(9.144) (17.526)
0.160
(4.064)
0.175
(4.445)
95-827
97-827
25
2.280
(57.912)
1.852
(47.041)
1.652
(41.960)
0.180
(4.572)
0.360
0.360
(9.144) (17.526)
0.160
(4.064)
0.174
(4.420)
95-826
97-826
25
2.280
(57.912)
1.852
(47.041)
1.652
(41.960)
0.220
(5.588)
0.440
0.690
(11.176) (17.526)
0.160
(4.064)
0.174
(4.420)
95-828
97-828
37
2.298
(58.369)
2.500
(63.500)
2.290
(58.166)
0.220
(5.588)
0.440
0.690
(11.176) (17.526)
0.160
(4.064)
0.184
(4.674)
0.025
(0.635)
B
C
R 0.050
(1.270)
E
D
F
20.0
RIGHT VIEW
TOP VIEW
41
www.lairdtech.com
EMI ESSENTIALS
SMD CONTACTS
BDG Series
B5G Series
BCG Series
BXG Series
BCG Series
B6G Series
B3G Series
Part Numbering
1 material code
2 shape code
3 electroplate code
4 size code (width)
5 size code (length)
6 size code (high)
3 - 4 X 5 X 6
B:BeCu T:TiCu S:stainless P:Phosphor Bronze
C-type 5-type D-type 3-type
G:Au S:Sn N:Ni A:Ag
.mm ex. 25 2.5 mm
.mm ex.40 4.0 mm
.mm ex.100 10.0 mm
example: BCG-20x30x040
42
www.lairdtech.com
EMI ESSENTIALS
PART
NUMBER
MATERIAL
AVAILABLE
PLATINGS
TYPICAL
APPLICATIONS
PARTS PER
REEL
PART
NUMBER
MATERIAL
AVAILABLE
PLATINGS
TYPICAL
APPLICATIONS
PARTS
PER REEL
BMI-C-001
0,10 mm BeCu
Gold
Grounding, energy
carrying
3000
BMI-C-001
0,10 mm BeCu
Gold
Grounding, energy
carrying
3000
BMI-C-001-SN
0,10 mm BeCu
Tin
Grounding, energy
carrying
3000
BMI-C-001-SN
0,10 mm BeCu
Tin
Grounding, energy
carrying
3000
BMI-C-002
0,10 mm BeCu
Gold
Grounding, energy
carrying
3500
BMI-C-004
0,10 mm BeCu
Gold
Grounding, energy
carrying
1400
BMI-C-004-SN
0,10 mm BeCu
Tin
Grounding, energy
carrying
1400
BMI-C-006
0,10 mm BeCu
Tin
Grounding, energy
carrying
3500
2300
3500 (Var)
BMI-C-007-01
0,13 mm BeCu
Tin
Grounding, energy
carrying
BMI-C-010-*
0,20 mm Spring
Steel
Tin
Standoff, support
Material properties are for reference only. Product testing by purchaser is recommended to confirm.
Laird assumes no liability for product failure unless specifically stated in writing.
PART
NUMBER
MATERIAL
AVAILABLE
PLATINGS
TYPICAL
APPLICATIONS
PARTS
PER REEL
BMI-C-004
0,10 mm BeCu
Gold
Grounding, energy
carrying
1400
Tin
Grounding, energy
carrying
1400
MATERIAL
AVAILABLE
PLATINGS
TYPICAL
APPLICATIONS
PARTS
PER REEL
BMI-C-002
0,10 mm BeCu
Gold
Grounding, energy
carrying
3500
BMI-C-004-SN
0,10 mm BeCu
Side View
5,97
5,18
Top View
Front View
4,31
1,52
2,08
5,18
Right Side
30.000
3,81
Front View
Footprint
4,31 3,66
0,65
5,73
MATERIAL
AVAILABLE
PLATINGS
TYPICAL
APPLICATIONS
PARTS
PER REEL
PART
NUMBER
MATERIAL
BMI-C-006
0,10 mm BeCu
Tin
Grounding,
energy carrying
3500
BMI-C-007-01
0,13 mm BeCu
Front View
SideView
Tin
Side View
Front View
1.50
2,30
2,00
2,86
2300
1,40
2,00
3,20
Footprint
2,48
RO,55X2
INSIDE
2,30
1,50
3,30
1.00
2,00
1,00
1,50
Footprint
2,00
www.lairdtech.com
2,12
43
EMI ESSENTIALS
THICKNESS
in (mm)
HEAT TREATMENT
PLATING/COATING
COMMENTS
.0035 to .080
(0,089 to 2,03)
Heat Treatable
.004 to .090
(0,10 to 2,29)
N/A
Copper Alloys:
110, 102, 122, 1093
.006 to .125
(0,15 to 3,18)
N/A
Brass Alloys:
260, 210, 220, 226, 230,
240, 268, 350, 353
.004 to .090
(0,10 to 2,29)
N/A
.004 to 0.060
(0,10 to 1,52)
N/A
.004 to .090
(0,10 to 2,29)
N/A
Tin, gold
.004 to .090
(0,10 to 2,29)
Heat Treatable
Tin, gold
.0035 to .080
(0,089 to 2,03)
N/A
Additional material choices are available upon request. Material properties are for reference only. Product testing by purchaser is recommended to confirm. Laird assumes no liability for product failure unless specifically stated in writing.
44
www.lairdtech.com
EMI ESSENTIALS
Our CAD helps you fine-tune your initial designs. Our finite element analysis
(FEA) simulates the performance of that design under actual working conditions.
Our CNC equipment helps produce precisely fabricated samples. Our optical
gauging inspection system ensures that the latest measurement technology
is used to measure your parts. Computer-programmable high-speed Bruderer
Our CAD helps you fine-tune your initial designs. Our finite element analysis
punch presses enable our progressive dies to produce families of parts
(FEA) simulates the performance of that design under actual working conditions.
economically
by you
eliminating
theyour
needinitial
for costly
multiple
dies. element
The result:
CAD helps
fine-tune
designs.
Our finite
Our CNC
equipment
helps produce
precisely
fabricated
samples. Ouranalysis
optical
Laird
can
meet
your
custom
stamping
needs
with
the
shortest,
mostconditions.
reliable
(FEA) simulates
the performance
of that
undermeasurement
actual working
gauging
inspection
system ensures
thatdesign
the latest
technology
lead
timesequipment
in the industry.
Our
CNC
helps
produce
precisely fabricated samples.
OurBruderer
optical
is used
to measure your
parts.
Computer-programmable
high-speed
gauging
inspection
system
ensures thatdies
thetolatest
measurement
punch presses
enable
our progressive
produce
families oftechnology
parts
SHORT
A SPECIALTY
is
used toRUNS
measure
your parts.
high-speed
Bruderer
economically
by eliminating
theComputer-programmable
need for costly multiple dies.
The result:
With
Laird
you get
complete
prototype and
lowproduce
volume expertise.
Our
punch
presses
enable
our progressive
families of
parts
Laird can meet your custom
stamping dies
needstowith
the shortest,
most
reliable
capabilities range from photo-etching and secondary stamping to an
economically
the need for costly multiple dies. The result:
lead timesselection
in by
theeliminating
industry.
extensive
of universal tooling and short-run production systems.
Laird can meet your custom stamping needs with the shortest, most reliable
lead timesRUNS
in the A
industry.
SHORT
SPECIALTY
LAIRD DOES
IT ALL
With Laird you get complete prototype and low volume expertise. Our
We provide full in-house tool and die design and manufacturing capabilities including CAD, CAM and the high-precision tolerances of wire EDM.
capabilities
rangeAfrom
photo-etching and secondary stamping to an
SHORT
RUNS
SPECIALTY
We manufacture custom components for many products, including connectors,switches, and electronic and electromechanical assemblies. Platings
extensive
of universal
toolingand
andlow
short-run
systems.
With Lairdselection
you get complete
prototype
volumeproduction
expertise. Our
from
gold torange
zinc from
are also
a part of our
No wonder
capabilities
photo-etching
andcapabilities.
secondary stamping
to some
an of the worlds leading electronics, aerospace, automotive andinstrumentation
companies
turn
to
Laird
for
custom-engineered
stampings.
For
more
information on custom products, contact Laird's sales department.
extensiveDOES
selection
of universal tooling and short-run production systems.
LAIRD
IT ALL
We provide full in-house tool and die design and manufacturing capabilities including CAD, CAM and the high-precision tolerances of wire EDM.
LAIRD
DOES ITcustom
ALL components for many products, including connectors,switches, and electronic and electromechanical assemblies. Platings
We
manufacture
Many
of the
worlds
leading
ofand
highmanufacturing
technology
products
turn
to worlds
Laird forCAD,
theirCAM
custom
requirements.
Critical
and
We
toolamanufacturers
and
design
capabilities
andassembly
the high-precision
tolerances
oflead
wiretime
EDM.
fromprovide
gold
tofull
zincin-house
are
also
partdie
of our
capabilities.
No wonder
some of
theincluding
leading
electronics,
aerospace,
automotive
andinstrumentation
We
manufacture
custom
components
for
many
products,
including
connectors,switches,
and
electronic
and
electromechanical
assemblies.
Platings
companiescriteria
turn toare
Laird
for custom-engineered
stampings.
more
information
on custom
products, contact Laird's sales department.
inspection
ensured
by SPC quality control
duringFor
both
stamping
and assembly
operations.
from gold to zinc are also a part of our capabilities. No wonder some of the worlds leading electronics, aerospace, automotive andinstrumentation
CAPABILITIES:
companies turn to Laird for custom-engineered stampings. For more information on custom products, contact Laird's sales department.
Fully automated or semiautomated equipment
Many of the worlds leading manufacturers of high technology products turn to Laird for their custom assembly requirements. Critical lead time and
Heat staking
inspection criteria are ensured by SPC quality control during both stamping and assembly operations.
of the welding
worlds leading manufacturers of high technology products turn to Laird for their custom assembly requirements. Critical lead time and
Many
Ultrasonic
CUSTOM ASSEMBLIES
CAPABILITIES:
criteria
are ensured by SPC quality control during both stamping and assembly operations.
inspection
Resistance
welding
Fully automated or semiautomated equipment
CAPABILITIES:
Conventional and orbital riveting
Heat staking
Fullycertification
automated soldering
or semiautomated equipment
MIL
Ultrasonic welding
Heat
staking
Critical/intricate requirements performed
Resistance welding
Ultrasonic
weldingfor pick-and-place
Special
packaging
Conventional and orbital riveting
Resistance welding
MIL certification soldering
Conventional and orbital riveting
Critical/intricate requirements performed
MIL certification soldering
Special packaging for pick-and-place
Critical/intricate requirements performed
Special packaging for pick-and-place
MULTISLIDE CAPABILITIES
MultiSlide fabrication provides high volume production quantities with low-cost
tooling. A variety of part configurations can be designed for this economic
process. In-house tooling design and manufacturing help reduce lead times.
ADVANTAGES:
MultiSlide fabrication provides high volume production quantities with low-cost
Variationsfabrication
in materialsofare
from
wire to flat strips
Economic
RF available
board level
shields
Tooling can be easily reworked to accommodate moderate changes
Fully
production
For
moreautomated
information
on custom products, contact Laird Technologies
Form stations are independently adjustable for part consistency
sales
department.
Tooling
can be easily reworked to accommodate moderate changes
Interchangeability of tools
Form stations are independently adjustable for part consistency
Economic fabrication of RF board level shields
www.lairdtech.com
Interchangeability of tools
For more information on custom products, contact Laird Technologies
Economic fabrication of RF board level shields
sales department.
45
EMI ESSENTIALS
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
46
www.lairdtech.com
METALLURGICAL CATEGORY
Gold; Au-Pt alloys; wrought platinum;
graphite carbon
Rhodium plating
Silver; high-silver alloys
Nickel; nickel-copper alloys; titanium,
titanium alloys; Monel
Beryllium copper; low brasses or bronzes;
silver solder; copper; Ni-Cr alloys; austenitic
corrosion-resistant steels; most chrome-moly steels;
specialty high-temp stainless steels
Commercial yellow brasses and bronzes
High brasses and bronzes; naval brass; Muntz metal
18% Cr type corrosion resistant steels;
common 300 series stainless steels
Chromium or tin plating; 12% Cr type corrosion
resistant steels; most 400 series stainless steels,
i.e., 410 and some cast stainless steels
Terneplate; tin-lead solder
Lead; high-lead alloys
Wrought 2000 series aluminum alloys
Wrought gray or malleable iron; plain carbon and
low-alloy steels; armco iron; cold-rolled steel
Wrought aluminum alloys except 2000 series cast
Al-Si alloys; 6000 series aluminum
Cast aluminum alloys other than Al-Si;
cadmium plating
ANODIC
INDEX, V
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.65
0.70
0.75
0.80
0.85
0.90
0.95
1.00
1.05
1.10
1.15
1.20
1.25
1.30
1.35
1.40
1.45
1.50
1.55
1.60
1.65
1.70
1.75
1.80
1.85
EMI ESSENTIALS
RHODIUM
SILVER
NICKEL
BERYLLIUM
TIN
SMALL
SURFACE
CATHODIC
ANODIC
LARGE SURFACE
47
www.lairdtech.com
EMI ESSENTIALS
VENT PANELS
48
www.lairdtech.com
EMI ESSENTIALS
VENT
PANELS
PANELS
MAXAIR
MaxAirTM
COMBINING EMI INNOVATION
AND COST EFFICIENCY
Laird's patented MaxAir vent panel product line provides
an innovative cost effective approach for providing
increased airflow and EMI protection for
telecommunications hardware equipment such
as fans and server racks.
This metallized polycarbonate honeycomb material
provides a rigid medium eliminating the need for costly
frame designs. This frameless design allows greater airflow
through the entire honeycomb surface and ease of
installation through its press-to-fit assembly. The MaxAir
vent panel provides greater durability and flexibility than
traditional aluminum vent panels.
Varying densities of material are available to meet specific
levels of rigidity requirements. The honeycomb cell size can
be 0.125 in (3,18mm) or 0.250 in (6,35mm) in standard
thicknesses of 0.250 in (6,35mm) and 0.500 in (12,70mm).
Shielding
ShieldingEffectiveness
Effectiveness per MIL-STD-285
MIL-STD-285 (mod.)
(mod.)
Frameless
Vent
Panel w/Conductive
Foam
Band, gasket
Frameless
Vent Panel
w/compressible
conductive
perimeter
110
100
TM
MaxAir
Vent
Panel
MaxAir
Vent
Panel
Framed
Aluminum
Vent
Panel
Framed
Al Vent
Panel
90
80
70
60
50
40
30
20
10
0
00
00
1 0
0
90 0
0
80 0
0
70
00
60
00
50
00
40
00
30
00
20
00
10
0
90
0
80
0
70
0
60
0
50
0
40
0
30
0
20
Frequency (MHz)
50%
(0.5"
Thick, 0.125"
Cell )
(0.500Thick,
0.125Cell)
Air Volume
Flow Volume
Difference
Air Flow
Difference
TM
MaxAirvs.
vs.
Ventw/0.25"
Panel w/Wide
0.250Frame
Wide Frame
MaxAir
AlAluminum
Vent Panel
6" x 6" Vent Panel
40%
APPLICATIONS:
30%
Military applications
Shielded rooms
20%
10%
0%
0.05
0.10
0.15
0.20
0.25
0.30
0.35
For additional information on any of the other products available, please contact sales for assistance or visit us at www.lairdtech.com.
36
49
www.lairdtech.com
EMI ESSENTIALS
VENT PANELS
EMI/DUST FILTRATION PANEL
ELECTRO-AIR
TM
Electro-Air EMI/Dust
Filtration Panel
FRAME
MATERIAL
FILTER
MEDIA
EMI
GASKET
PLATING
FINISH
73
Aluminum Alloy
6063-T4
GRILLE: Aluminum
Alloy 6063-T4
MEDIA: Wire
Fabric Aluminum
RR-W-385
Type VII 18x14
GROUND:
Knit Monel Wire
Per QQ-N-281
Class A
ELASTOMER:
Neoprene Sponge
MIL-R-6130
Type II Medium
Chromate Coating
Per MIL-C-5541
Class 3
Aluminum Alloy
1100-0
Per QQ-A-250/1,
with Polyethylene
Interlayer
Chromate Coating
Per MIL-C-5541
Class 3
74
Aluminum Alloy
6063-T4
SHIELDING EFFECTIVENESS
For additional information on any of the other products available, please contact sales for assistance or visit us at www.lairdtech.com.
3737
50
www.lairdtech.com
EMI ESSENTIALS
VENT PANELS
ELECTROVENT
TM
ElectroVent
70
71
72
0.35
PLATING
EMI
GASKET
Aluminum Alloy
MIL-C-7438
Aluminum Alloy
6063-T4
Chromate Coating
MIL-C-5541
Class 3
Aluminum Alloy
MIL-C-7438
Aluminum Alloy
6063-T4
Tin Plating
MIL-T-10727
Type 1
Aluminum Alloy
6063-T4*
Chromate Coating
Honeycomb only
Tin Plate
MIL-T-10727
Type 1
0.30
0.25
0.20
0.15
0.10
0.05
CODE HONEYCOMB
FRAME
NO. MATERIALS MATERIALS
Vent panels range from 3 in. (76,2 mm) to 18 in. (457,2 mm)
square in standard sizes, and can be ordered with either
0.50 in. (12,7 mm) thick or space-saving 0.25 in. (6,4 mm) thick
honeycombs.
For additional information on any of the other products available, please contact sales for assistance or visit us at www.lairdtech.com.
51
www.lairdtech.com
EMI ESSENTIALS
FABRIC-OVER FOAM
PRODUCT SELECTION GUIDE
Material Type
Metal Plating
Product
Type
Ripstop
Mesh
Non-Woven
NiCu
Plain Weave
Good Shielding
Common Use
Ripstop Weave
Good Shielding
High Abrasion
Knitted
Breathability
Bonded Fiber
High Shielding
Sturdy/Firm
86726
86785
86203
86205
87580
86750
X
X
X
X
X
X
X
X
X
X
X
X
PNW
NNW
DN05A
DT17A
X
X
51H
51L
501
51G
51Y
T1G
R1G
221
X
X
X
X
X
X
X
X
HIK
HIL
Material
Designation
FABRIC TAPES
Single Sided
Double Sided
X
X
WRAPPED GASKETS
FOF, Conductive
fabric wrapped over
non-conductive foam
gasketing
X
X
X
X
X
X
X
X
X
X
51M
CONDUCTIVE FOAM
CF, Layered and fully
conductive foam
G1W
Product Type
www.lairdtech.com
Material Width
Size Option
Material Length
EMI ESSENTIALS
Material
Thickness
Foam
PSA
(mm)
Specifications
Temperature
UL Flame
Application Specific
Compression
Set
Application
Differentiation
Color
CABLE WRAPPING
GENERAL USE
CABLE WRAPPING
GENERAL USE
UL REQUIRED
THIN APPLICATIONS
HIGH SHIELDING/
THICK
HIGH SHIELDING/
THICK
DOUBLE SIDED
DOUBLE SIDED
NICKEL
NICKEL
BLACK
BLACK
GRAY OR BLACK
NICKEL
STANDARD
STANDARD
NON-UL
RIPSTOP FABRIC
MESH / BREATHABLE
LOWER COMPRESS
HIGHER TEMP
MOISTURE / FIRM
COMPLEX /
'C' SHAPES
COMPLEX /
'C' SHAPES
NON-EMI
NICKEL
BLACK
ni
ni
NICKEL
NICKEL
NICKEL
NICKEL
Attachment Method
Core
for Wrapped
Gaskets
Acrylic Based
Adhesive
Operating Limit
% of Original
Height at 70C
CONDUCTIVE
CONDUCTIVE
CONDUCTIVE
CONDUCTIVE
CONDUCTIVE
CONDUCTIVE
0.13
0.12
0.10
0.09
0.13
0.08
80C
80C
80C
80C
80C
80C
UL510
-
N/A
N/A
N/A
N/A
N/A
N/A
CONDUCTIVE
0.40
80C
N/A
CONDUCTIVE
0.60
80C
N/A
CONDUCTIVE
CONDUCTIVE
0.05
0.17
80C
80C
N/A
N/A
70C
70C
70C
70C
70C
70C
85C
70C
UL94V0
UL94V0
UL94V0
UL94V0
UL94V0
UL94V0
UL94HB
< 20
< 20
< 20
< 20
< 20
< 15
< 20
< 20
PU
70C
UL94V0
PU
70C
UL94V0
PU
70C
UL94V0
< 20
70C
UL94V0
< 20
PU
PU
PU
PU
PU
PU
PU
PU
PU
OPTIONAL WITH
STANDARD OR
CONDUCTIVE
STANDARD
CONDUCTIVE
SEE PROFILE
SELECTION
LIST
1.0, 1.5,
2.0, 2.5, 3.2
Z-AXIS
CONDUCTIVITY /
COMPLEX DIE CUTS
NICKEL
NICKEL
NICKEL
NICKEL
NICKEL
BLACK
WHITE
NICKEL
www.lairdtech.com
Fabric Cover
H=Ni/Cu Taffeta
Part Length
53
EMI ESSENTIALS
FABRIC-OVER FOAM
METALLIZED SHIELDING GASKETS
Laird is a fully integrated manufacturer of profile and Input/
Output (I/O) EMI shielding gaskets. The metallized FabricOver-Foam product line has been expanded greatly due to our
committed efforts in new product development and meeting or
surpassing regulatory requirements.
This catalog is designed to provide helpful information to
engineers on our expanded product line. In this section, you will
find benefits for Fabric-Over-Foam gaskets, material options and
an extensive list of profile and I/O sizes and configurations.
Laird specializes in quick turnaround of custom shapes and sizes
of EMI shielding gaskets. If you dont find exactly what you
need, our engineers will help you design the right solution to
your shielding problem.
A sampling for standard profiles are shown; custom
configurations and sizes can be designed to meet your specific
requirements. Profiles are shown in ascending order by height
(starting on page 58).
54
www.lairdtech.com
EMI ESSENTIALS
FABRIC-OVER FOAM
METALLIZED SHIELDING GASKETS
BENEFITS OF FABRIC-OVER-FOAM GASKETS
Shielding effectiveness of >100 dB across a wide spectrum of
frequencies (see figure 2).
FIGURE 2
Frequency (MHz)
55
www.lairdtech.com
EMI ESSENTIALS
ECOGREEN
ENVIRONMENTALLY FRIENDLY
FABRIC-OVER-FOAM SHIELDING GASKETS
TM
Laird is pleased to introduce the next generation in RoHS-compliant EMI shielding technology.
While Laird Fabric-Over-Foam EMI gaskets are RoHS compliant, we are proactively strengthening our compliancy by engineering
halogen-free EcoGreenTM shields.
Not only are the patented EcoGreenTM shields environmentally friendly, they offer high EMI shielding effectiveness, extremely low
compression forces, abrasion-resistant metallized fabrics, large service temperature ranges, and multiple profile/gasket options.
Laird shields are flame retardant and pass the stringent UL94-VO burn test and the whole gasket is Halogen-free.
APPLICATIONS
Computer servers
Desktop computers
Digital cameras
Internal/external hard drives
Liquid Crystal Displays (LCDs)
Medical equipment
Notebook computers
Plasma Display Panels (PDPs)
Printers
Set-top boxes
Telecommunications enclosure cabinets
AGENCY APPROVALS
UL designation V0 041
UL file #OCDT2.E170327
More information is available at ul.com
FIGURE 1
Force/Displacement/Resistance Graph of 4211 Profile
0.10
51G
51H
51N
4
0.06
3
0.04
0.02
0.08
0.00
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
0
100%
% Compression
Fabric
Fabric Type
Metal Coating
Conductivity
Application
Benefits
Ripstop
Ni/Cu
<0.07 ohms/square
Taffeta
Ni/Cu
<0.07 ohms/square
Knit Mesh
Ni/Cu
<0.10 ohms/square
Black Taffeta
Ni/Cu
<0.07 ohms/square
Ni/Cu
<0.05 ohms/square
Foam
Foam Type
Color
Application
Benefits
Urethane (Polyester)
5-10%
Charcoal
56
Thickness
Benefits
Acrylic Non-conductive
0.005"
Acrylic Conductive
0.004"
www.lairdtech.com
EMI ESSENTIALS
FABRIC-OVER-FOAM
I/O GASKET SELECTION GUIDE
Part Number Example:
Digits: 1 2 3 4
5 6
7 8 9
10 11 12 13 14
4 6 9 3 - PA - 5 1 H - 0 1 2 0 0
Profile
Shape
& Size
Attachment
& Part
Specific
Details
Core Materials
Flame Rating Fabric Cover
Part Length
5 = Soft Urethane
0 = Not Rated 8, K, B = Ni/Cu Ripstop
R = High Temp
1 = UL V0
Y, 6 = Ni/Cu Knit Mesh
T = Low Compression
H = Ni/Cu Taffeta
Set / Force
L = Black Ni/Cu Taffeta
0 = No Foam
H = Sculpted Foam /
'C' Shapes
* Certain combinations of materials may not be available for all Profiles or I/Os.
Please consult the Engineering Department at Laird when unsure.
See back cover for contact information.
DIGITS 1 THROUGH 4
Designate profile number. Select profile or I/O and sizes from pages 58-61 (Profile) or 62-64 (I/O).
DIGITS 5 THROUGH 6
Designate part-specific attributes of the product including cutouts, notches, tape and a variety
of other customized details. PA STD PSA / PB STD PSA W/ ERL / PC STD CPSA
DIGITS 7 THROUGH 9
Designate the core materials, flame rating and fabric cover combinations. Select these options
from the recommended list in the table below.
DIGITS 10 THROUGH 14
Designate the part length in inches to two decimal places. For the example shown above,
the 01200 denotes a 12.00 inch (304,8 mm) long gasket).
Fabric
Non-Rated
RoHS Compliant
UL94-VO Rated
RoHS Compliant
UL94-VO Rated
RoHS Compliant
Halogen-Free EcoGreen
Typical Apps
Shielding
TM
Ni/Cu Mesh
506
51N
Compros Only
Medium
Ni/Cu Taffeta
501
51H
Comp/Shear
High
Ni/Cu NRS
50B
51G
Comp/Shear
High
C-Fold Only
High
51S
Comp/Shear
Harsh Environment
High
Ni/Cu NRS
T1G
High
Ni/Cu NRS
R1G
85C Applications
High
51L
Visible Applications
High
Ni/Cu NRS
H1K
Sn/Cu NRS
All parts listed in this catalog are lead free and RoHS compliant.
57
www.lairdtech.com
EMI ESSENTIALS
FABRIC-OVER-FOAM
PROFILE SELECTION GUIDE
D-SHAPED
W
H
Profile Number
inches (mm)
H
inches (mm)
W
4584
0.040 (1,0)
0.150 (3,8)
4320
0.050 (1,3)
0.140 (3,6)
4541
0.050 (1,3)
0.250 (6,4)
4358
0.060 (1,5)
0.098 (2,5)
4184
0.060 (1,5)
0.150 (3,8)
4548
0.060 (1,5)
0.250 (6,4)
4356
0.070 (1,8)
0.180 (4,6)
4052
0.080 (2,0)
0.080 (2,0)
4283
0.080 (2,0)
0.157 (4,0)
4181
0.080 (2,0)
0.394 (10,0)
4053
0.090 (2,3)
0.090 (2,3)
4912
0.090 (2,3)
0.150 (3,8)
4375
0.094 (2,4)
0.200 (5,1)
4240
0.100 (2,5)
0.300 (7,6)
4742
0.120 (3,0)
0.150 (3,8)
4202
0.120 (3,0)
0.250 (6,4)
4078
0.120 (3,0)
0.360 (9,1)
4090
0.125 (3,2)
0.090 (2,3)
inches (mm)
H
0.015 (0,4)
0.015 (0,4)
0.015 (0,4)
0.017 (0,4)
0.020 (0,5)
0.020 (0,5)
0.020 (0,5)
0.020 (0,5)
0.030 (0,8)
0.040 (1,0)
0.040 (1,0)
0.040 (1,0)
0.040 (1,0)
0.040 (1,0)
0.040 (1,0)
0.040 (1,0)
0.040 (1,0)
0.040 (1,0)
0.040 (1,0)
0.040 (1,0)
0.040 (1,0)
0.040 (1,0)
0.040 (1,0)
0.040 (1,0)
0.040 (1,0)
0.040 (1,0)
0.040 (1,0)
0.050 (1,3)
0.050 (1,3)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
inches (mm)
W
0.200 (5,1)
0.276 (7,0)
0.394 (10,0)
0.826 (21,0)
0.157 (4,0)
0.196 (5,0)
1.217 (30,9)
1.970 (50,0)
0.900 (22,9)
0.120 (3,0)
0.157 (4,0)
0.200 (5,1)
0.236 (6,0)
0.275 (7,0)
0.395 (10,0)
0.510 (13,0)
0.600 (15,2)
0.709 (18,0)
0.750 (19,1)
0.900 (22,9)
1.000 (25,4)
1.126 (28,6)
1.431 (36,3)
1.640 (41,7)
1.770 (45,0)
1.840 (46,7)
3.300 (83,8)
0.090 (2,3)
0.220 (5,6)
0.850 (21,6)
0.125 (3,2)
0.200 (5,1)
0.280 (7,1)
0.394 (10,0)
0.500 (12,7)
0.551 (14,0)
0.591 (15,0)
0.608 (15,4)
0.620 (15,7)
0.650 (16,5)
0.750 (19,1)
Profile Number
4906
4692
4228
4123
4112
4120
4295
4609
4787
4134
4607
4242
4542
4789
4368
4105
4060
H inches (mm)
H
0.130 (3,3)
0.140 (3,6)
0.150 (3,8)
0.150 (3,8)
0.158 (4,0)
0.160 (4,1)
0.170 (4,3)
0.180 (4,6)
0.200 (5,1)
0.197 (5,0)
0.200 (5,1)
0.250 (6,4)
0.248 (6,3)
0.250 (6,4)
0.299 (7,6)
0.375 (9,5)
0.500 (12,7)
W inches (mm)
W
0.188 (4,8)
0.250 (6,4)
0.150 (3,8)
0.354 (9,0)
0.433 (11,0)
0.240 (6,1)
0.250 (6,4)
0.400 (10,2)
0.250 (6,4)
0.394 (10,0)
0.480 (12,2)
0.250 (6,4)
0.291 (7,4)
0.375 (9,5)
0.272 (6,9)
0.500 (12,7)
0.500 (12,7)
inches (mm)
H
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.060 (1,5)
0.062 (1,6)
0.062 (1,6)
0.062 (1,6)
0.070 (1,8)
0.070 (1,8)
0.070 (1,8)
0.070 (1,8)
0.079 (2,0)
0.079 (2,0)
0.080 (2,0)
0.080 (2,0)
0.080 (2,0)
0.080 (2,0)
0.080 (2,0)
0.080 (2,0)
0.080 (2,0)
0.080 (2,0)
0.080 (2,0)
0.080 (2,0)
0.080 (2,0)
0.080 (2,0)
inches (mm)
W
0.866 (22,0)
0.900 (22,9)
1.000 (25,4)
1.063 (27,0)
1.235 (31,4)
1.330 (33,8)
1.370 (34,8)
1.400 (35,6)
1.455 (37,0)
1.525 (38,7)
1.575 (40,0)
1.615 (41,0)
1.693 (43,0)
1.740 (44,2)
1.878 (47,7)
1.900 (48,3)
2.305 (58,5)
2.52 (64,0)
3.091 (78,5)
3.780 (96,0)
0.300 (7,6)
0.870 (22,1)
2.000 (50,8)
0.160 (4,1)
0.551 (14,0)
0.650 (16,5)
1.063 (27,0)
0.118 (3,0)
0.354 (9,0)
0.160 (4,1)
0.200 (5,1)
0.236 (6,0)
0.275 (7,0)
0.295 (7,5)
0.315 (8,0)
0.394 (10,0)
0.400 (10,2)
0.535 (13,6)
0.710 (18,0)
0.787 (20,0)
0.827 (21,0)
RECTANGLE SHAPED
W
Profile Number
58
*4570
*4577
*4572
*4300
*4058
*4569
*4500
*4501
*4850
4245
4223
4220
4404
4215
4208
4219
4259
4677
4532
4597
4297
4363
4179
4512
4270
4573
4394
4246
4088
4086
4273
4056
4157
4629
4051
4455
4430
4626
4606
4579
4164
www.lairdtech.com
Profile Number
4170
4225
4080
4599
4518
4079
4161
4163
4591
4091
4628
4231
4679
4408
4148
4169
4160
4235
4596
4907
4071
4171
4143
4268
4302
4199
4410
4688
4392
4094
4186
4602
4096
4650
4601
4357
4182
4675
4359
4571
4200
EMI ESSENTIALS
FABRIC-OVER-FOAM
PROFILE SELECTION GUIDE
Rectangle Shaped Continued
4361
inches (mm)
H
0.080 (2,0)
inches (mm)
W
0.900 (22,9)
4055
inches (mm)
H
0.157 (4,0)
4325
0.080 (2,0)
0.984 (25,0)
4516
0.157 (4,0)
0.354 (9,0)
4194
0.080 (2,0)
1.126 (28,6)
4791
0.157 (4,0)
0.394 (10,0)
4389
0.080 (2,0)
1.259 (32,0)
4098
0.157 (4,0)
0.591 (15,0)
4315
0.080 (2,0)
1.345 (34,2)
4704
0.158 (4,0)
0.236 (6,0)
4531
0.080 (2,0)
1.550 (39,4)
4241
0.160 (4,1)
0.200 (5,1)
4263
0.080 (2,0)
1.615 (41,0)
4253
0.160 (4,1)
0.280 (7,1)
4260
0.080 (2,0)
1.842 (46,8)
4114
0.158 (4,0)
0.433 (11,0)
4262
0.080 (2,0)
1.736 (44,1)
4115
0.160 (4,1)
0.590 (15,0)
4355
0.080 (2,0)
5.340 (135,6)
4249
0.160 (4,1)
0.790 (20,1)
4339
0.090 (2,3)
0.200 (5,1)
4257
0.160 (4,1)
0.880 (22,4)
4903
0.090 (2,3)
0.535 (13,6)
4252
0.160 (4,1)
0.985 (25,0)
4248
0.090 (2,3)
1.060 (26,9)
4250
0.160 (4,1)
1.375 (34,9)
4254
0.090 (2,3)
1.370 (34,8)
4251
0.160 (4,1)
1.700 (43,2)
4255
0.090 (2,3)
1.655 (42,0)
4142
0.177 (4,5)
0.354 (9,0)
4256
0.090 (2,3)
1.700 (43,2)
4370
0.180 (4,6)
2.000 (50,8)
4801
0.100 (2,5)
0.265 (6,7)
4902
0.196 (5,0)
0.315 (8,0)
4082
0.100 (2,5)
0.375 (9,5)
4258
0.190 (4,8)
1.625 (41,3)
4612
0.100 (2,5)
0.500 (12,7)
4698
0.195 (5,0)
0.130 (3,3)
4133
0.100 (2,5)
0.354 (9,0)
4211
0.195 (5,0)
0.395 (10,0)
4285
0.100 (2,5)
1.330 (33,8)
4674
0.197 (5,0)
0.512 (13,0)
4582
0.100 (2,5)
1.500 (38,1)
4360
0.197 (5,0)
0.591 (15,0)
4330
0.100 (2,5)
1.625 (41,3)
4281
0.200 (5,1)
3.900 (99,1)
4083
0.110 (2,8)
0.240 (6,1)
4365
0.216 (5,5)
0.394 (10,0)
4042
0.118 (3,0)
0.125 (3,2)
4100
0.216 (5,5)
0.500 (12,7)
4619
0.118 (3,0)
0.197 (5,0)
4786
0.217 (5,5)
0.394 (10,0)
4272
0.118 (3,0)
0.315 (8,0)
4528
0.217 (5,5)
0.709 (18,0)
4286
0.118 (3,0)
0.394 (10,0)
4087
0.225 (5,7)
0.218 (5,5)
4583
0.118 (3,0)
0.787 (20,0)
4701
0.250 (6,4)
0.375 (9,5)
4126
0.118 (3,0)
1.717 (43,6)
4795
0.250 (6,4)
0.500 (12,7)
4209
0.120 (3,0)
0.155 (3,9)
4798
0.250 (6,4)
0.600 (15,2)
4210
0.120 (3,0)
0.355 (9,0)
4226
0.250 (6,4)
0.750 (19,1)
4264
0.120 (3,0)
0.750 (19,1)
4224
0.250 (6,4)
1.000 (25,4)
4536
0.120 (3,0)
1.551 (39,4)
4705
0.256 (6,5)
0.236 (6,0)
4788
0.125 (3,2)
0.250 (6,4)
4740
0.256 (6,5)
0.394 (10,0)
4694
0.125 (3,2)
0.500 (12,7)
4649
0.275 (7,0)
0.394 (10,0)
4065
0.125 (3,2)
0.600 (15,2)
4568
0.275 (7,0)
0.511 (13,0)
4247
0.125 (3,2)
0.700 (17,8)
4113
0.276 (7,0)
0.433 (11,0)
4376
0.125 (3,2)
0.720 (18,3)
4227
0.283 (7,2)
1.180 (30,0)
4064
0.125 (3,2)
1.000 (25,4)
4222
0.295 (7,5)
0.591 (15,0)
4603
0.125 (3,2)
1.125 (28,6)
4237
0.295 (7,5)
1.500 (38,1)
4066
0.125 (3,2)
1.250 (31,8)
4057
0.315 (8,0)
0.157 (4,0)
4158
0.125 (3,2)
1.400 (35,6)
4687
0.315 (8,0)
0.236 (6,0)
4239
0.125 (3,2)
1.615 (41,0)
4216
0.315 (8,0)
0.395 (10,0)
4238
0.125 (3,2)
1.850 (47,0)
4610
0.335 (8,5)
0.394 (10,0)
4693
0.130 (3,3)
0.190 (4,8)
4702
0.375 (9,5)
0.250 (6,4)
4062
0.130 (3,3)
0.380 (9,7)
4081
0.375 (9,5)
0.500 (12,7)
4694
0.130 (3,3)
0.500 (12,7)
4070
0.375 (9,5)
0.750 (19,1)
4632
0.125 (3,2)
1.625 (41,3)
4192
0.375 (9,5)
1.000 (25,4)
4575
0.125 (3,2)
2.000 (50,8)
4176
0.394 (10,0)
0.787 (20,0)
4615
0.138 (3,5)
0.197 (5,0)
4513
0.413 (10,5)
0.394 (10,0)
4594
0.138 (3,5)
0.350 (8,9)
4173
0.413 (10,5)
0.512 (13,0)
4525
0.140 (3,6)
0.512 (13,0)
4524
0.452 (11,5)
0.472 (12,0)
4203
0.150 (3,8)
0.100 (2,5)
4391
0.500 (13,0)
0.984 (25,0)
4047
0.150 (3,8)
0.500 (12,7)
4172
0.591 (15,0)
0.394 (10,0)
4533
0.156 (4,0)
0.630 (16,0)
4233
0.600 (15,2)
1.000 (25,4)
4799
0.156 (4,0)
0.650 (16,5)
4136
0.670 (17,0)
0.591 (15,0)
4914
0.156 (4,0)
0.709 (18,0)
4900
0.700 (17,8)
0.500 (12,7)
4499
0.157 (4,0)
0.197 (5,0)
4686
0.709 (18,0)
0.394 (10,0)
4741
0.157 (4,0)
0.256 (6,5)
4744
0.787 (20,0)
0.580 (14,7)
Profile Number
www.lairdtech.com
Profile Number
inches (mm)
W
0.315 (8,0)
59
EMI ESSENTIALS
FABRIC-OVER-FOAM
PROFILE SELECTION GUIDE
SQUARE SHAPED
4520
inches (mm)
H
0.080 (2,0)
inches (mm)
W
0.080 (2,0)
4046
0.118 (3,0)
0.118 (3,0)
4522
0.157 (4,0)
0.157 (4,0)
4212
0.195 (5,0)
0.195 (5,0)
4048
0.236 (6,0)
0.236 (6,0)
4049
0.250 (6,4)
0.250 (6,4)
4695
0.375 (9,5)
0.375 (9,5)
4206
0.395 (10,0)
0.395 (10,0)
4084
0.500 (12,7)
0.500 (12,7)
4204
0.670 (17,0)
0.670 (17,0)
4517
0.750 (19,1)
0.750 (19,1)
4089
0.787 (20,0)
0.787 (20,0)
Profile Number
C-FOLD SHAPED
L1
H
L2
W
BELL SHAPED
Profile Number
inches (mm)
H
inches (mm)
W
inches (mm)
L1
inches (mm)
L2
4593
0.250 (6,4)
0.280 (7,1)
0.125 (3,2)
0.060 (1,5)
4168
0.315 (8,0)
0.315 (8,0)
0.080 (2,0)
0.080 (2,0)
4198
0.385 (9,8)
0.420 (10,7)
0.115 (2,9)
0.060 (1,5)
4243
0.400 (10,2)
0.430 (10,9)
0.125 (3,2)
0.060 (1,5)
4600
0.415 (10,5)
0.450 (11,4)
0.135 (3,4)
0.650 (1,7)
4529
0.465 (11,8)
0.420 (10,7)
0.115 (2,9)
0.060 (1,5)
4697
0.675 (17,1)
0.590 (15,0)
0.165 (4,2)
0.156 (4,0)
4703
0.947 (24,1)
0.550 (14,0)
0.157 (4,0)
0.170 (4,3)
4630
inches (mm)
H
0.070 (1,8)
inches (mm)
W
0.180 (4,6)
4379
0.070 (1,8)
0.564 (14,3)
4387
0.080 (2,0)
0.675 (17,1)
4633
0.100 (2,5)
0.300 (7,6)
4131
0.140 (3,6)
0.500 (12,7)
4797
inches (mm)
H
0.106 (2,7)
inches (mm)
W
0.445 (11,3)
4097
0.106 (2,7)
0.315 (8,0)
4796
0.110 (2,8)
0.450 (11,4)
4205
0.250 (6,4)
0.750 (19,1)
4106
0.312 (7,9)
0.707 (18,0)
4189
0.350 (8,9)
0.750 (19,1)
Profile Number
H
W
KNIFE SHAPED
Profile Number
W
H
P-SHAPED
4150
inches (mm)
H
0.118 (3,0)
inches (mm)
W
0.520 (13,2)
inches (mm)
L1
0.242 (6,1)
inches (mm)
L2
0.020 (0,50)
4699
0.145 (3,7)
0.520 (13,2)
0.150 (3,8)
0.020 (0,50)
4792
0.200 (5,1)
0.480 (12,2)
0.170 (4,3)
0.090 (2,3)
4537
0.374 (9,5)
0.887 (22,5)
0.500 (13,0)
0.051 (1,0)
Profile Number
inches (mm)
H
inches (mm)
W
inches (mm)
L1
inches (mm)
L2
4117
0.130 (3,3)
0.130 (3,3)
0.060 (1,5)
0.065 (1,7)
4054
0.209 (5,3)
0.130 (3,3)
0.063 (1,6)
0.071 (1,8)
4502
0.400 (10,2)
0.300 (7,6)
0.175 (4,4)
0.140 (3,6)
Profile Number
L1
H
L2
W
J-SHAPED
L1
H
L2
60
www.lairdtech.com
EMI ESSENTIALS
FABRIC-OVER-FOAM
PROFILE SELECTION GUIDE
DOUBLE D-SHAPED
W
Profile Number
inches (mm)
H
inches (mm)
W
4299
0.110 (2,8)
0.382 (9,7)
L-SHAPED
Profile Number
L1
inches (mm)
H
inches (mm)
W
inches (mm)
L1
inches (mm)
L2
4469
0.216 (5,5)
0.354 (9,0)
.138 (3,5)
.118 (3,0)
4534
0.591 (15,0)
0.551 (14,0)
.098 (2,5)
.126 (3,2)
H
L2
W
ROUND SHAPED
H
Profile Number
inches (mm)
H
inches (mm)
W
4201
0.100 (2,5)
0.100 (2,5)
4372
0.125 (3,2)
0.125 (3,2)
Profile Number
inches (mm)
H
inches (mm)
W
4349
0.157 (4,0)
0.244 (6,2)
4857
0.172 (4,4)
0.244 (6,2)
4A58
0.152 (3,9)
0.235 (6,0)
T-SHAPED
H
61
www.lairdtech.com
EMI ESSENTIALS
FABRIC-OVER-FOAM
I/O SELECTION GUIDE
DIVERSE ASSEMBLY OPTIONS
Multiple attachment options provide a variety of ways to install critical EMI products. Pressure Sensitive Adhesive
(PSA) has been complemented with the Easy Peel release liner and rigid clip configurations. These mechanical
attachment options enable you to take advantage of existing tooling on doors and enclosures as well as offer
alternate attachment methods to better meet design requirements.
D-SHAPED CLIP
W
L1
inches (mm)
H
inches (mm)
W
inches (mm)
L1
4110
4111
4039
4033
4121
4040
4038
4043
4085
4041
0.203(5,2)
0.243(6,2)
0.304(7,7)
0.35(8,9)
0.358(9,1)
0.41(10,4)
0.43(10,9)
0.43(10,9)
0.43(10,9)
0.568(14,4)
0.250 (6,4)
0.250 (6,4)
0.480 (12,2)
0.480 (12,2)
0.250 (6,4)
0.480 (12,2)
0.490 (12,4)
0.490 (12,4)
0.490 (12,4)
0.480 (12,2)
0.125 (3,2)
0.165 (4,2)
0.195 (5,0)
0.240 (6,1)
0.280 (7,1)
0.300 (7,6)
0.310 (7,9)
0.310 (7,9)
0.310 (7,9)
0.458 (11,6)
4913
inches (mm)
H
0.440 (11,2)
inches (mm)
W
0.375 (9,5)
inches (mm)
L1
0.360 (9,1)
4413
0.485 (12,3)
0.390 (9,9)
0.405 (10,3)
inches (mm)
H
0.335 (8,5)
inches (mm)
W
0.284 (7,3)
inches (mm)
L1
0.240 (6,1)
Profile Number
L1
Profile Number
Profile Number
4E42
L1
.020 (0,5)
1 to 6 (25,4 152,4)
.030 (0,8)
.050 (1,3)
.100 (2,5)
.187 (4,7)
.250 (6,4)
62
www.lairdtech.com
EMI ESSENTIALS
FABRIC-OVER-FOAM
I/O SELECTION GUIDE
The following pages show examples of standard I/O gaskets used in computer and telecommunication applications. If you have
different requirements, the Engineering Department will design gaskets to the specifications you supply. Laird will design your I/O
from a fully detailed print, drawing file, or the actual panel to which the gasket is to be applied.
Width tolerance
Length tolerance
Cutout tolerance
If different tolerances are required, please consult Engineering. See back cover for contact information.
ERL
PSA Tape
63
www.lairdtech.com
EMI ESSENTIALS
FABRIC-OVER-FOAM
I/O GASKET SELECTION GUIDE
SCSI + 50 PIN CONNECTOR, PART NUMBER 4164-FE
Usage: Peripheral, Hard Disk, CD-ROM
D-Sub Pins
D-Sub Design
PSA
4N64EA51N00138
Female
No
4N64EB51N00138
Male
No
4N64EC51N00171
15
Female
No
4N64ED51N00171
15
Male
No
4N64EE51N00225
25
Female
No
4N64EF51N00225
25
Male
No
4N64EG51N00290
37
Female
No
4N64EH51N00290
37
Male
No
4N64EJ51N00281
50
Female
No
4N64EK51N00281
50
Male
No
4N64EL51N00138
Female
Yes
4N64EM51N00138
Male
Yes
4N64EM51N00171
15
Female
Yes
4N64EP51N00171
15
Male
Yes
4N64ER51N00225
25
Female
Yes
4N64ES51N00225
25
Male
Yes
4N64ET51N00290
37
Female
Yes
4N64EU51N00290
37
Male
Yes
4N64EV51N00281
50
Female
Yes
4N64EW51N00281
50
Male
Yes
A
B
C
.060 (1,5)
64
www.lairdtech.com
.750 (19,1)
EMI ESSENTIALS
65
www.lairdtech.com
EMI ESSENTIALS
Hollow
Core Round
UltraFlex
D Shape
Hollow Core
Double Round
All Mesh
Single Round
with Fin Strip
All Mesh
Double Round
with Fin Strip
All Mesh
Rectangular
Strip
All Mesh
Round Strip
Rectangular with
Sponge Elastomer
Electronit supersoft
Round with
Silicone ElastomerTubing
ElectroGround
EMI Washers
66
www.lairdtech.com
ElectroMesh Tape
Double Fin
with Silicone
Elastomer Tubing
UltraSoft Knit
EMI ESSENTIALS
PART NO.
PRODUCT
8101-01XX-40,41,47,48,49
8102-02XX-40,41,47,48,49
8103-01XX-40,41,47,48,49
8104-01XX-40,41,47,48,49
8300-XXXX-40,42,43,44,46
ELECTROMESH TAPE
8401-01XX-XX
8402-01XX-XX
8403-01XX-50,52,54,55,60,61
8403-01XX-XX
8404-01XX-XX
8405-01XX-50,52,54,55,60,61
8406-01XX-50,52,54,55,60,61
8409-01XX-50,52,54,55,60,61
8410-01XX-50,52,54,55,60,61
8412-01XX-50,52,54,55,60,61
8413-01XX-56,64,65
8414-01XX-56,64,65
8415-01XX-56,64,65
843X-2XXX-X
ELECTRONIT SUPERSOFT
8417-3XXX-62
89XX-01XX-40,42,43,44,46
PAGE NO.
67
www.lairdtech.com
EMI ESSENTIALS
Size Range
Tolerance
Diameter
To 0.120 (3,1)
0.130 to 0.380 (3,3 to 9,7)
0.390 to 0.050 (9,9 to 12,7)
Groove Dimensions
+0.005 (0,1)
W -0.000 (0,0)
H +0.005 (0,1)
-0.000 (0,0)
Dia.
Laird Technologies
Part No.
8101-0101-40
8101-0102-40
Groove Dimensions
W
H
0.047 (1,2)
0.060 (1,5)
0.069 (1,8)
0.090 (2,3)
Diameter
0.062 (1,6)
0.093 (2,4)
8101-0103-40
8101-0104-40
8101-0105-40
0.093 (2,4)
0.117 (3,0)
0.140 (3,6)
0.120 (3,1)
0.150 (3,8)
0.180 (4,6)
0.125 (3,2)
0.156 (4,0)
0.187 (4,8)
8101-0106-40
8101-0107-40
0.187 (4,8)
0.234 (5,9)
0.240 (6,1)
0.292 (7,4)
0.250 (6,4)
0.312 (7,9)
8101-0108-40
8101-0109-40
0.281 (7,1)
0.375 (9,5)
0.360 (9,1)
0.485 (12,3)
0.375 (9,5)
0.500 (12,7)
8101-0135-40
0.563 (14,3)
0.730 (18,5)
0.750 (19,1)
SIZE VS. TOLERANCE: ULTRAFLEX HOLLOW CORE ROUND WITH SINGLE FIN
Tolerance
Size Range
To 0.180 (4,6)
Dim W
N/A
Dim H
+ 0.020/- 0.000 (+0,5/-0,0)
Dim W
Dim H
To 0.180 (4,6)
N/A
Laird Technologies
Part No.*
8103-0125-40
Width
0.300 (7,6)
Height
0.093 (2,4)
8103-0101-40
8103-0104-40
8103-0118-40
8103-0102-40
0.375 (9,5)
0.375 (9,5)
0.375 (9,5)
0.500 (12,7)
0.062 (1,6)
0.125 (3,2)
0.156 (4,0)
0.062 (1,6)
8103-0103-40
8103-0107-40
0.500 (12,7)
0.500 (12,7)
0.093 (2,4)
0.156 (4,0)
8103-0109-40
8103-0117-40
0.500 (12,7)
0.500 (12,7)
0.250 (6,4)
0.375 (9,5)
8103-0105-40
8103-0108-40
8103-0112-40
8103-0106-40
0.625 (15,9)
0.625 (15,9)
0.625 (15,9)
0.750 (19,1)
0.125 (3,2)
0.187 (4,8)
0.312 (7,9)
0.125 (3,2)
8103-0110-40
8103-0113-40
0.750 (19,1)
0.875 (22,2)
0.250 (6,4)
0.312 (7,9)
8103-0111-40
8103-0114-40
1.000 (25,4)
1.000 (25,4)
0.250 (6,4)
0.375 (9,5)
8103-0115-40
8103-0116-40
1.000 (25,4)
1.000 (25,4)
0.437 (11,1)
0.500 (12,7)
Width
0.500 (12,7)
Height
0.062 (1,6)
8104-0102-40
0.500 (12,7)
0.125 (3,2)
8104-0105-40
8104-0103-40
0.625 (15,9)
0.750 (19,1)
0.187 (4,8)
0.125 (3,2)
8104-0107-40
0.750 (19,1)
0.250 (6,4)
8104-0104-40
8104-0106-40
1.000 (25,4)
1.000 (25,4)
0.125 (3,2)
0.187 (4,8)
8104-0108-40
8104-0109-40
1.000 (25,4)
1.000 (25,4)
0.250 (6,4)
0.375 (9,5)
Size Range
Dim W
Dim H
Laird Technologies
Part No.
Width
Height
8102-0202-40
0.200 (5,1)
0.130 (3,3)
8102-0209-40
8102-0203-40
0.250 (6,4)
0.250 (6,4)
0.125 (3,2)
0.190 (4,8)
8102-0204-40
0.312 (7,9)
0.250 (6,4)
8102-0205-40
8102-0206-40
8102-0207-40
0.380 (9,7)
0.500 (12,7)
0.750 (19,1)
0.312 (7,9)
0.375 (9,5)
0.670 (17,0)
PSA
W
For other platings, replace the suffix 40 as follows: 41-Tin plate; 47-Nickel plate; 48-Cadmium
plate; 49-Zinc clear chromate. Other platings available upon request.
68
www.lairdtech.com
EMI ESSENTIALS
MATERIAL SPECIFICATIONS
Material Code
40
42
43
Wire Type
Beryllium Copper
Monel
Aluminum
Tin Plated Copper Clad Steel
44
46
Specification
ASTM B 197
QQ N 281 Class A
5056 Alloy
ASTM B 520
SS304
SIZE VS. TOLERANCE: ALL MESH SINGLE ROUND WITH FIN STRIP
Tolerance
Size Range
0.130 to 0.380 (3,3 to 9,7)
0.390 to 0.050 (9,9 to 12,7)
Dim W
+ 0.060/- 0.030 (+1,5/-0,8)
+ 0.060/- 0.060 (+1,5/-1,5)
Dim H
+ 0.030/- 0.030 (+0,8/-0,8)
+ 0.040/- 0.030 (+1,2/-0,8)
Base
Part No.*
8403-0101-XX
8403-0104-XX
Fin Portion
Width
0.375 (9,5)
0.375 (9,5)
Round Portion
Height
0.062 (1,8)
0.125 (3,2)
8403-0102-XX
8403-0103-XX
8403-0107-XX
0.500 (12,7)
0.500 (12,7)
0.500 (12,7)
0.062 (1,8)
0.093 (2,4)
0.156 (4,0)
8403-0109-XX
8403-0105-XX
0.500 (12,7)
0.625 (15,9)
0.250 (6,4)
0.125 (3,2)
8403-0108-XX
8403-0112-XX
0.625 (15,9)
0.625 (15,9)
0.187 (4,8)
0.312 (7,9)
8403-0106-XX
0.750 (19,1)
0.125 (3,2)
Base
Part No.*
Fin Portion
Width
Round Portion
Height
8403-0121-XX
8403-0110-XX
8403-0113-XX
0.750 (19,1)
0.750 (19,1)
0.875 (22,2)
0.187 (4,8)
0.250 (6,4)
0.312 (7,9)
8403-0111-XX
8403-0114-XX
8403-0115-XX
8403-0116-XX
1.000 (25,4)
1.000 (25,4)
1.000 (25,4)
1.000 (25,4)
0.250 (6,4)
0.375 (9,5)
0.437 (11,1)
0.500 (12,7)
8403-0131-XX
1.500 (38,1)
0.375 (9,5)
8403-0125-XX
1.500 (38,1)
0.500 (12,7)
SIZE VS. TOLERANCE: ALL MESH DOUBLE ROUND WITH FIN STRIP
Tolerance
Size Range
To 0.180 (4,6)
Dim W
N/A
Dim H
+ 0.020/- 0.000 (+0,5/-0,0)
Connecting
Width
0.500 (12,7)
Round
Height
0.062 (1,6)
8404-0102-XX
8404-0105-XX
8404-0103-XX
0.500 (12,7)
0.625 (15,9)
0.750 (19,1)
0.125 (3,2)
0.187 (4,8)
0.125 (3,2)
8404-0107-XX
8404-0104-XX
8404-0106-XX
0.750 (19,1)
1.000 (25,4)
1.000 (25,4)
0.250 (6,4)
0.125 (3,2)
0.187 (4,8)
8404-0108-XX
8404-0109-XX
1.000 (25,4)
1.000 (25,4)
0.250 (6,4)
0.375 (9,5)
8404-0115-XX
8404-0124-XX
8404-0120-XX
1.250 (31,8)
1.500 (38,1)
1.500 (38,1)
0.250 (6,4)
0.375 (9,5)
0.500 (12,7)
8404-0121-XX
8404-0118-XX
8404-0122-XX
2.000 (50,8)
2.000 (50,8)
2.500 (63,5)
0.375 (9,5)
0.500 (12,7)
0.500 (12,7)
Dim W
Dim H
To 0.180 (4,6)
Base
Part No.*
8401-0101-XX
Width
W
0.062 (1,8)
Height
H
0.062 (1,6)
Base
Part No.*
8401-0123-XX
Width
W
0.250 (6,4)
Height
H
0.250 (6,4)
8401-0134-XX
0.093 (2,4)
0.062 (1,8)
8401-0104-XX
0.312 (7,9)
0.062 (1,6)
8401-0107-XX
8401-0102-XX
0.093 (2,4)
0.125 (3,2)
0.093 (2,4)
0.062 (1,6)
8401-0115-XX
8401-0122-XX
0.312 (7,9)
0.312 (7,9)
0.125 (3,2)
0.187 (4,8)
8401-0108-XX
0.125 (3,2)
0.093 (2,4)
8401-0124-XX
0.312 (7,9)
0.250 (6,4)
8401-0112-XX
8401-0137-XX
0.125 (3,2)
0.156 (4,0)
0.125 (3,2)
0.062 (1,8)
8401-0105-XX
8401-0111-XX
0.375 (9,5)
0.375 (9,5)
0.062 (1,6)
0.093 (2,4)
8401-0129-XX
0.156 (4,0)
0.125 (3,2)
8401-0116-XX
0.375 (9,5)
0.125 (3,2)
8401-0142-XX
8401-0103-XX
0.156 (4,0)
0.187 (4,8)
0.156 (4,0)
0.062 (1,6)
8401-0125-XX
0.375 (9,5)
0.250 (6,4)
8401-0109-XX
0.187 (4,8)
0.093 (2,4)
8401-0127-XX
8401-0106-XX
0.375 (9,5)
0.500 (12,7)
0.375 (9,5)
0.062 (1,6)
8401-0113-XX
0.187 (4,8)
0.125 (3,2)
8401-0117-XX
0.500 (12,7)
0.125 (3,2)
8401-0120-XX
8401-0131-XX
0.187 (4,8)
0.218 (5,5)
0.187 (4,8)
0.156 (4,0)
8401-0133-XX
8401-0126-XX
0.500 (12,7)
0.500 (12,7)
0.187 (4,8)
0.250 (6,4)
8401-0155-XX
0.250 (6,4)
0.062 (1,8)
8401-0118-XX
0.750 (19,1)
0.125 (3,2)
8401-0110-XX
8401-0114-XX
8401-0121-XX
0.250 (6,4)
0.250 (6,4)
0.250 (6,4)
0.093 (2,4)
0.125 (3,2)
0.187 (4,8)
8401-144-XX
8401-0119-XX
0.750 (19,1)
1.000 (25,4)
0.187 (4,8)
0.125 (3,2)
Diameter
Diameter
8402-0101-XX
0.062 (1,6)
8402-0102-XX
8402-0103-XX
0.093 (2,4)
0.125 (3,2)
8402-0106-XX
8402-0107-XX
0.250 (6,4)
0.312 (7,9)
8402-0104-XX
8402-0105-XX
0.156 (4,0)
0.187 (4,8)
8402-0108-XX
8402-0109-XX
0.375 (9,5)
0.500 (12,7)
Dia.
www.lairdtech.com
69
EMI ESSENTIALS
Width
Specification
+ 0.030/- 0.020 (+0,8/-0,5)
Beryllium Copper
ASTM B 197
+ 0.030 (+-0,8)
Wire Type
Elastomer Type
Height
+ 0.030/- 0.020 (+0
+- 0.030 (+-0,8
+- 0.046 (+-1,2
+- 0.062 (+-1,6
+- 0.062 (1,6)
Height
+ 0.030/- 0.020 (+0,8/-0,5)
+- 0.030 (+-0,8)
+- 0.046 (+-1,2)
+- 0.062 (+-1,6)
Elastomer
Height
Total Height
Including
Knitted Wire
Elastomer
Width
Total Width
Total Height
Including
Knitted Wire
Tolerance
Width
+ 0.030/- 0.020 (+0,8/-0,5)
+- 0.030 (+-0,8)
+- 0.046 (1,2)
Laird Technologies
Part No.*
8409-0101-50
8409-0102-50
Elastomer
Width
0.125 (3,2)
0.188 (4,8)
Total
Height
0.160 (4,1)
0.160 (4,1)
8409-0104-50
8409-0130-50
0.188 (4,8)
0.250 (6,4)
0.188 (4,8)
0.062 (1,6)
0.225 (5,7)
0.270 (6,9)
0.225 (5,7)
0.082 (2,1)
8409-0103-50
8409-0105-50
8409-0125-50
0.250 (6,4)
0.250 (6,4)
0.375 (9,5)
0.125 (3,2)
0.250 (6,4)
0.125 (3,2)
0.285 (7,2)
0.285 (7,2)
0.410 (10,4)
0.160 (4,1)
0.285 (7,2)
0.160 (4,1)
8409-0166-50
8409-0126-50
8409-0158-50
0.375 (9,5)
SIZE
0.375 (9,5)
0.500 (12,7)
0.250 (6,4)
0.375 (9,5)
0.125 (3,2)
0.410 (10,4)
0.405 (10,3)
0.518 (13,2)
0.285 (7,2)
0.405 (10,3)
0.143 (3,6)
8409-0106-50
8409-0132-50
8409-0161-50
0.500 (12,7)
0.500 (12,7)
0.500 (12,7)
0.285 (7,2)
0.285 (7,2)
0.352 (8,9)
0.500 (12,7)
0.535 (13,6) + 0.040/-0.030 (+1,0/-0,8)
0.750 (19,1)
0.285 (7,2) + 0.062/-0.040 (+1,6/-1,0)
1.000 (25,4)
0.250 (6,4)
1.035 (26,3)
0.285 (7,2)
1.250 (31,8) Elastomer0.500 (12,7)
1.272 (32,3)
0.567
(14,4)
Elastomer
Diameter
Diameter
The suffix 50 is BeCu neoprene sponge. For other materials, replace the suffix 50 as follows: 54-Neoprene
sponge and Monel; 52-Silicone sponge and beryllium copper; 55-Silicone sponge and Monel; 60-Neoprene sponge
and tin plated copper clad steel; 61-Silicone sponge and tin plated copper clad steel.
8409-0117-50
8409-0176-50
8409-0168-50
8409-0173-50
Tota
Inclu
Knit
Total
Including
Tolerance
Size Range
To 0.120 (3,1)
O.D.
+- 0.020 (+-0,5)
+- 0.030 (+-0,8)
+ 0.040/-0.030 (+1,0/-0,8)
+ 0.062/-0.040 (+1,6/-1,0)
Elastomer
Diameter
Elastomer
Diameter
Total
Including
Knitted Wire
Total
Including
Knitted Wire
Round with Sponge Elastomer
Laird Technologies
Part No.
Elastomer
Diameter
8410-0101-50**
8410-0102-50
8410-0103-50
0.062 (1,6)
0.125 (3,2)
0.188 (4,8)
8410-0104-50
8410-0105-50
8410-0106-50
8410-0107-50
0.250 (6,4)
0.312 (7,9)
0.375 (9,5)
0.500 (12,7)
8413-0102-64
8413-0103-64
8413-0104-64
Tubing
Diameter (O.D.)
0.125 (3,2)
0.188 (4,8)
0.250 (6,4)
0.312 (7,9)
SIZE
VS. TOLERANCE:
SINGLE 0.375
FIN WITH
SPONGE
ELASTOMER
8413-0114-64
(9,5)
0.383 (9,7)
0.348 (8,8)
8413-0105-64
0.375 (9,5)
0.410 (10,4) Tolerance
0.410 (10,4)
0.500 (12,7)Width0.535 (13,6)
0.535 (13,6) Size Ran8413-0106-64
ge
Height
+- 0.030 (+-0,8)
0.130 to 0.380 (3,3 to 9,7)
+ 0.060/-0.030 (
The suffix 50 is BeCu neoprene sponge. For other
The suffix 64 is BeCu with silicone
elastomer tubing.
+- 0.060 (+(9,9 tomaterials,
12,7) replace the+suffix
0.040/0.030
(+1,0/-0,8)
materials, replace the suffix 50 as follows: 0.390 to 0.050
For other
64
as follows:
54-Neoprene sponge and Monel; 52-Silicone sponge
56-Silicone
elastomer tubing with
Monel;0.040
65-Silicone
0.510 to 1.000
(13,0 to 25,4)
+ 0.062/(+1,6/-1,0)
+ 0.090/-0.060 (+
and beryllium copper; 55-Silicone sponge and Monel;
elastomer tubing with tin plated copper clad steel.
60-Neoprene sponge and tin plated copper clad steel;
61-Silicone sponge and tin plated copper clad steel.
Total
Overall
**Not available in Neoprene sponge. Height
Width
Including
Including
Knitted
Knitted
Wire
Wire
Elastomer Dia.
Tolerance
Size Range
0.130 to 0.380 (3,3 to 9,7)
0.390 to 0.050 (9,9 to 12,7)
0.510 to 1.000 (13,0 to 25,4)
Width
+- 0.030 (+-0,8)
+ 0.040/- 0.030 (+1,0/-0,8)
+ 0.062/- 0.040 (+1,6/-1,0)
Height
+ 0.060/-0.030 (+1,5/-0,8)
+- 0.060 (+-1,5)
+ 0.090/-0.060 (+2,3/-1,5)
70
Total
Height
Including
Knitted
Wire
Overall
Width
Including
Knitted
Wire
www.lairdtech.com
Elastomer Dia.
Laird Technologies
Part No.*
8403-0101-50
8403-0102-50
8403-0103-50
8403-0104-50
8403-0105-50
8403-0106-50
8403-0107-50
Elastomer
Overall
Total
Diameter
Width
Height
0.125 (3,2)
0.500 (12,7)
0.160 (4,1)
0.125 (3,2)
0.750 (19,1)
0.160 (4,1)
0.188 (4,8)
0.625 (15,9)
0.225 (5,7)
0.188 (4,8)
0.750 (19,1)
0.225 (5,7)
0.250 (6,4)
0.750 (19,1)
0.285 (7,2)
All dimensions shown are in inches (millimeters) unless otherwise specified.
0.250 (6,4)
1.000 (25,4)
0.285 (7,2)
0.500 (12,7)
1.000 (25,4)
0.535 (13,6)
The suffix 50 is BeCu neoprene sponge. For other materials, replace the suffix 50 as follows: 54-Neoprene
sponge and Monel; 52-Silicone sponge and beryllium copper; 55-Silicone sponge and Monel; 60- Neoprene sponge
and tin plated copper clad steel; 61-Silicone sponge and tin plated copper clad steel.
Diameter
Diameter
EMI ESSENTIALS
8410-0107-50
Total
Including
Knitted Wire
Total
Including
Knitted Wire
0.500 (12,7)
SIZE
SIZE VS.
VS. TOLERANCE:
TOLERANCE: SINGLE
DOUBLEFIN
FINWITH
WITHSPONGE
SPONGEELASTOMER
ELASTOMER
WWididthth
+-+0.030
+ 0,8)
- 0.030( (-+0,8)
++0.040/0.040/-0.030
0.030(+1,0/-0,8)
(+1,0/-0,8)
0.510
0.510toto1.000
1.000(13,0
(13,0toto25,4)
25,4)
++0.062/0.062/-0.040
0.040(+1,6/-1,0)
(+1,6/-1,0)
Total
Height
H
Including
Knitted
Wire
Overall
Width
Including
Knitted
Wire
HHeeigighhtt
++ 0.060/-0.030
0.060/- 0.030(+1,5/-0,8)
(+1,5/-0,8)
+-+0.060
+-1,5)
- 0.060( (1,5)
++0.090/-0.060
0.090/- 0.060(+2,3/-1,5)
(+2,3/-1,5)
Height
+- 0.030 (+-0,8)
Tolerance + 0.060/- 0.030 (+1,5/-0,8)
+ Heig(1,5)
0.390 toS0.050
+ 0.040/- W
0.030
ize Ra(9,9
nge to 12,7)
idth(+1,0/-0,8)
ht
SIZE VS. TOLERANCE: DOUBLE FIN WITH SPONGE ELASTOMER- 0.060
+- 0.030
0.510
25,4)
+ 0.062/0.040(+-(+1,6/-1,0)
+ 0.090/0.130toto1.000
0.380(13,0
(3,3 to 9,7)
0,8)
0.060/- 0.060
0.030 (+2,3/-1,5)
(+1,5/-0,8)
SIZE VS.
TOLERANCE:
SINGLE
FIN
WITH
SILICONE
ELASTOMER
TUBING
+- 0.060 (1,5)
0.390 to 0.050 (9,9 to 12,7)
+ 0.040/- 0.030 (+1,0/-0,8) Tolerance
For
Size
vs.
Tolerance
charts,
dimensions
measured
under 4
ize Ra(13,0
nge to 25,4)
W
idth(+1,6/-1,0)
Height(+2,3/-1,5)
0.510 to S1.000
+ 0.062/-oz.
0.040
0.090/load (11,3 gms)Tolerance
with 0.750+dia.
(19,10.060
mm) anvil.
+- 0.030 (+-0,8)
0.130 to 0.380 (3,3 to 9,7)
+ 0.060/- 0.030 (+1,5/-0,8)
Size Range
Width
Height
For
Size(+1,0/-0,8)
vs.specified.
Tolerance charts, dimensions
measured
All dimensions
are to
in 12,7)
inches (millimeters)+ unless
otherwise
+- 0.060
toshown
0.050 (9,9
0.040/0.030
(1,5) under 4
H 0.390
+- 0.030
0.130 to 0.380 (3,3 to 9,7)
(+-0,8)
0.060/oz. load
(11,3 gms) with 0.750+dia.
(19,10.030
mm)(+1,5/-0,8)
anvil.
0.510 to 1.000 (13,0 to 25,4)
+ 0.062/- 0.040 (+1,6/-1,0)
+ 0.090/0.060 (+2,3/-1,5)
+- 0.060
(1,5)
0.390 to 0.050 (9,9 to 12,7)
+ 0.040/- 0.030 (+1,0/-0,8)
H 0.510 to 1.000 (13,0 to 25,4)
+ 0.062/-For
0.040
+ 0.090/- 0.060
(+2,3/-1,5)
Size(+1,6/-1,0)
vs. Tolerance charts, dimensions
measured
under 4
W
oz. load (11,3 gms) with 0.750 dia. (19,1 mm) anvil.
For Size vs. Tolerance charts, dimensions
Double Fin with Sponge Elastomer
measured under 4 oz. load (11,3 gms) with
H Total
Overall
W
0.750 dia. (19,1 mm) anvil.
Width
Height
Double
Fin with Sponge Elastomer Including
Including
Knitted
Knitted
Wire
Wire
W
0.130 to 0.380 (3,3 to 9,7)
Tolerance
Elastomer Dia.
Single Fin with Silicone Elastomer
Tubing
w
Tolerance
www.lairdtech.com
0.535 (13,6)
LairdTechnologies
Technologies
Laird
PartNo.
No.**
Part
8403-0101-50
8412-0101-50
8403-0102-50
8412-0102-50
Elastomer
Elastomer
Diameter
Diameter
Overall
Overall
Width
Width
0.125(3,2)
(3,2)
0.125
0.125(3,2)
(3,2)
0.125
0.500 (12,7)
(12,7)
0.500
0.750 (19,1)
(19,1)
0.750
Total
Total
Height
Height
0.160
0.160(4,1)
(4,1)
0.160
0.160(4,1)
(4,1)
8403-0103-50
8412-0103-50
8403-0104-50
8412-0104-50
8403-0105-50
8412-0105-50
0.188(4,8)
(4,8)
0.188
0.188(4,8)
(4,8)
0.188
0.250(6,4)
(6,4)
0.250
0.625 (15,9)
(15,9)
0.625
0.750 (19,1)
(19,1)
0.750
0.750 (25,4)
(19,1)
1.000
0.225
0.225(5,7)
(5,7)
0.225
0.225(5,7)
(5,7)
0.285
0.285(7,2)
(7,2)
8403-0106-50
0.250
(6,4)
1.000 (33,3)
(25,4)
0.285
8412-0107-50
0.500
(12,7)
1.312
0.535(7,2)
(13,6)
8403-0107-50
0.500 (12,7)
1.000 (25,4)
0.535 (13,6)
The suffix 50 is BeCu neoprene sponge. For other materials, replace the suffix 50 as follows: 54-Neoprene
The
suffixand
50
is BeCu
neoprenesponge
sponge.
other materials,
replace the sponge
suffix 50
follows:
sponge
Monel;
52-Silicone
andForberyllium
copper; 55-Silicone
and as
Monel;
60-54-Neoprene
Neoprene sponge
sponge
Monel;
52-Silicone
and beryllium
copper;
55-Silicone
and Monel; 60- Neoprene sponge
61-Silicone
sponge and
tin plated
copper sponge
clad steel.
and tin and
plated
copper
clad steel;sponge
and tin plated copper clad steel; 61-Silicone sponge and tin plated copper clad steel.
Tolerance
FIN WITH
SPONGE ELASTOMER
Width
0.500 (12,7)
SINGLE
DOUBLEFIN
FINWITH
WITHSPONGE
SPONGEELASTOMER
ELASTOMER
Tolerance
Tolerance
SSizizeeRRaannggee
0.130
0.130toto0.380
0.380(3,3
(3,3toto9,7)
9,7)
0.390
0.390toto0.050
0.050(9,9
(9,9toto12,7)
12,7)
8413-0106-64
0.535 (13,6)
Technologies
Elastomer
Overall
Total
*DOUBLE
ForLaird
part
number
ordering
information
on pressure-sensitive
adhesive tape see
page 1.4.
FIN
WITH
SPONGE
ELASTOMER
Part No.*
Diameter
Width
Height
8412-0101-50
0.125
(3,2)
0.500
(12,7)
0.160
(4,1)
Laird
Technologies
Elastomer
Overall
Total
8412-0102-50
0.125
(3,2)
0.750
(19,1)
0.160
(4,1)
Part No.*
Diameter
Width
Height
DOUBLE
FIN WITH SPONGE
ELASTOMER
8412-0103-50
0.188 (3,2)
(4,8)
0.625 (12,7)
(15,9)
0.225 (4,1)
(5,7)
8412-0101-50
0.125
0.500
0.160
SINGLE
FIN WITH SILICONE
ELASTOMER
TUBING
Laird
Technologies
Elastomer
Overall
Total
8412-0104-50
0.188
(4,8)
0.225
(5,7)
8412-0102-50
0.125
(3,2)
0.750
(19,1)
0.160
(4,1)
Part No.*
Diameter
Width
Height
8412-0105-50
0.250
(6,4)
1.000
(25,4)
0.285
(7,2)
8412-0103-50
0.188
(4,8)
0.625
(15,9)
0.225
(5,7)
Laird Technologies
Tubing
Overall
Total Height
8412-0101-50
0.125
(3,2)
0.500
0.160
(4,1)
8412-0107-50
0.500
1.312 (12,7)
(33,3)
0.535
8412-0104-50
0.188(12,7)
(4,8)
0.750
(19,1)
0.225(13,6)
(5,7)
Part No.*
Diameter (O.D.)
Width
Over Wire
8412-0102-50
0.125
0.750
0.160
8412-0105-50
0.250 (3,2)
(6,4)
1.000 (19,1)
(25,4)
0.285 (4,1)
(7,2)
8414-0101-64
0.125 (3,2)
0.500
0.160
(4,1)
The suffix
50 is BeCu neoprene sponge.
other materials, replace
the (12,7)
suffix 50 as follows:0.225
54-Neoprene
8412-0103-50
0.188For
(4,8)
0.625
(5,7)
8412-0107-50
0.500
(12,7)
1.312 (15,9)
(33,3)
0.535 (13,6)
414-Monel;
0102-652-Silicone
4
0.750 sponge
(19,1) and Monel; 60- Neoprene sponge
sponge8and
sponge and beryllium copper; 55-Silicone
8412-0104-50
0.188
(4,8)
0.750
(19,1)
0.225
(5,7)
and tin plated copper
clad steel.
and tin8414-0103-64
plated copper clad steel; 61-Silicone
0.188 sponge
(4,8)
0.625
(15,9)
0.225
(5,7)
The suffix
50 is BeCu neoprene sponge.
other materials, replace
the(25,4)
suffix 50 as follows:0.285
54-Neoprene
8412-0105-50
0.250For
(6,4)
1.000
(7,2)
414-Monel;
0104-652-Silicone
4
0.750 sponge
(19,1) and Monel; 60- Neoprene sponge
sponge8and
sponge and beryllium copper; 55-Silicone
8412-0107-50
0.500 (12,7)
1.312 (33,3)
0.535 (13,6)
clad steel.
and tin8414-0105-64
plated copper clad steel; 61-Silicone
0.250 sponge
(6,6) and tin plated copper
0.750 (19,1)
0.285 (7,2)
84150
4-010is6-BeCu
64 neoprene sponge. For other materials, replace
1.0the
00 (suffix
25,4)50 as follows: 54-Neoprene
The suffix
sponge8414-0107-64
and Monel; 52-Silicone sponge0.312
and beryllium
copper; 55-Silicone
Neoprene
(7,9)
0.625 sponge
(15,9) and Monel; 60-0.348
(8,8) sponge
61-Silicone sponge and tin plated copper clad steel.
and tin8plated
414-01copper
08-64 clad steel;
1.000 (25,4)
8414-0109-64
8414-0110-64
0.375 (9,5)
0.750 (19,1)
1.120 (28,5)
0.410 (10,4)
SINGLE
FIN WITH SILICONE
ELASTOMER
TUBING
8414-0111-64
0.500
(12,7)
1.000 (25,4)
0.535 (13,6)
841Technologies
4-0112-64
1.2Overall
50 (31,8)
Laird
Tubing
Total Height
SINGLE FIN
WITH SILICONE ELASTOMER
TUBINGWidth
Wire
The suffix Part
64No.
is *BeCu with siliconeDiameter
elastomer(O.D.)
tubing. For other materials,
replace the suffix 64Over
as follows:
8414-0101-64
0.125
(3,2) elastomer tubing
0.500
0.160
(4,1)
Laird
Technologies
Tubing
Overall
Total
Height
56-Silicone
elastomer tubing with Monel;
65-Silicone
with(12,7)
tin plated copper clad
steel.
841Part
4-0No.
102*-64
0.75Width
0 (19,1)
Diameter (O.D.)
Over Wire
8414-0103-64
0.188 (3,2)
(4,8)
0.625 (12,7)
(15,9)
0.225 (4,1)
(5,7)
8414-0101-64
0.125
0.500
0.160
Laird
Tubing
Total Height
841Technologies
4-01024-64
0.7Overall
50 (19,1)
DOUBLE
TUBING
PartFIN
No.*WITH SILICONE
Diameter
(O.D.)
Width
Over Wire
8414-0105-64
0.250ELASTOMER
(6,6)
0.750
(19,1)
0.285
(7,2)
8414-0103-64
0.188
(4,8)
0.625
(15,9)
0.225
(5,7)
8414-0101-64
0.125
(3,2)
0.500
0.160
(4,1)
841Technologies
4-01046-64
01.70Overall
500 (12,7)
(1295,14)
Laird
Tubing
Total Height
88414-0105-64
41Part
4-01No.
02-64
0.7Width
50 (19,1)
(19,1)
8414-0107-64
0.312 (6,6)
(7,9)
0.625
(15,9)
0.348
(8,8)
0.250
0.750
0.285
(7,2)
Diameter
(O.D.)
Over Wire
*
8414-0103-64
0.188 (3,2)
(4,8)
0.625
(15,9)
0.225
88415-0101-64
414-01068-64
1.000 (12,7)
(25,4)
0.125
0.500
0.160 (5,7)
(4,1)
88414-0107-64
0..775500 ((15,9)
(1199,,11))
8414-0109-64
0.375 (7,9)
(9,5)
0.750
(19,1)
0.410
0.312
0.348(10,4)
(8,8)
8441145--00110042--6644
00.625
8414-0105-64
0.250 (4,8)
(6,6)
0.750
(19,1)
0.285
88415-0103-64
414-010180-64
1.01020 (15,9)
(258,45)
0.188
0.625
0.225 (7,2)
(5,7)
88414-0109-64
1..705000 ((19,1)
(1295,,14))
8414-0111-64
0.500
1.000
(25,4)
0.535 (10,4)
(13,6)
0.375(12,7)
(9,5)
0.410
8441145--00110064--6644
00.750
8414-0107-64
0.312 (6,4)
(7,9)
0.625
(15,9)
0.348
0.250
0.750
0.285 (8,8)
(7,2)
88415-0105-64
414-01102-64
1.12250 (19,1)
(2381,58)
88414-0111-64
4145-01086-64
11.000
.000 ((25,4)
25.,4)
0.500 (12,7)
0.535 (13,6)
The suffix
64
is
BeCu
with
silicone
elastomer
tubing.
For
other
materials,
replace
the
suffix
64
as
follows:
8414-0109-64
0.375 (7,9)
(9,5)
0.750
(19,1)
0.410
0.312
1.000
0.348(10,4)
(8,8)
88415-0108-64
414-0112-64
1.250 (25,4)
(31,8)
56-Silicone
elastomer tubing with Monel; 65-Silicone elastomer tubing with tin plated copper clad steel.
1.120 (28,5)
(28,5)
88415-0110-64
414-0110-64
0.375 (9,5)
1.120
0.410 (10,4)
The suffix
64 is BeCu with silicone elastomer
tubing. For other materials,
replace the suffix 64
as follows:
8414-0111-64
1.000 (31,8)
(25,4)
0.535
(13,6)
8415-0112-64
0.500 (12,7)
1.250
0.535
(13,6)
56-Silicone elastomer tubing with Monel; 65-Silicone elastomer tubing with tin plated copper clad steel.
8414-0112-64
1.250 (31,8)
The suffix 64 is BeCu with silicone elastomer tubing. For other materials, replace the suffix 64 as follows:
DOUBLEelastomer
FIN WITH
SILICONE
ELASTOMER
TUBING
56-Silicone
tubing
Monel;
65-Silicone
withreplace
tin plated
clad steel.
The suffix 64 is BeCu
with with
silicone
elastomer
tubing.elastomer
For othertubing
materials,
thecopper
suffix 64
as follows:
56-Silicone
elastomer tubing with Monel;Tubing
65-Silicone elastomer tubing Overall
with tin plated copper cladTotal
steel.
Laird Technologies
Height
Over Wire
*
8415-0101-64
0.125
(3,2)
0.500
(12,7)
0.160Height
(4,1)
Laird
Technologies
Tubing
Overall
Total
841Part
5-0No.
102-64
0.75Width
0 (19,1)
Diameter (O.D.)
Over Wire
DOUBLE
FIN*WITH SILICONE
ELASTOMER TUBING
8415-0103-64
0.188 (3,2)
(4,8)
0.625 (12,7)
(15,9)
0.225 (4,1)
(5,7)
8415-0101-64
0.125
0.500
0.160
Laird
Tubing
Total Height
841Technologies
5-01024-64
0.7Overall
50 (19,1)
Part No.*
Diameter
(O.D.)
Width
Over Wire
8415-0105-64
0.250 (4,8)
(6,4)
0.750
(19,1)
0.285
(7,2)
8415-0103-64
0.188
0.625
(15,9)
0.225
(5,7)
8415-0101-64
0.125 (3,2)
0.500
0.160 (4,1)
8415-01046-64
(1295,.14)
01.70500 (12,7)
88415-0105-64
415-0102-64
0.750 (19,1)
(19,1)
8415-0108-64
0.312 (6,4)
(7,9)
1.000
(25,4)
0.348 (7,2)
(8,8)
0.250
0.750
0.285
8415-0103-64
0.188
0.625
0.225(10,4)
(5,7)
0.375 (4,8)
(9,5)
1.120
(28,5)
0.410
88415-0110-64
415-0106-64
1.000 (15,9)
(25.4)
88415-0108-64
415-0104-64
01.250
.750 (25,4)
(19,1)
8415-0112-64
0.500
(31,8)
0.535
0.312(12,7)
(7,9)
1.000
0.348(13,6)
(8,8)
8415-0105-64
0.250
0.750
0.285(10,4)
(7,2)
8415-0110-64
0.375 (6,4)
(9,5)
1.120 (19,1)
(28,5)
0.410
The suffix 64 is BeCu with silicone elastomer tubing. For other materials, replace the suffix 64 as follows:
88415-0112-64
415elastomer
-0106-64tubing with Monel;
11.250
.00with
0 (31,8)
(2tin
5.4plated
)
0.500
(12,7) elastomer tubing
0.535
56-Silicone
65-Silicone
copper clad
steel.(13,6)
8415-0108-64
0.312 (7,9)
1.000 (25,4)
0.348 (8,8)
The suffix 64 is BeCu with silicone elastomer tubing. For other materials, replace the suffix 64 as follows:
8415-0110-64
0.375 (9,5)
1.120 (28,5)
0.410 (10,4)
56-Silicone elastomer tubing with Monel; 65-Silicone elastomer tubing with tin plated copper clad steel.
8415-0112-64
0.500 (12,7)
1.250 (31,8)
0.535 (13,6)
DOUBLE
FIN WITH SILICONE
ELASTOMER TUBING
Part No.
Diameter (O.D.)
Width
The suffix 64 is BeCu with silicone elastomer tubing. For other materials, replace the suffix 64 as follows:
56-Silicone elastomer tubing with Monel; 65-Silicone elastomer tubing with tin plated copper clad steel.
71
EMI ESSENTIALS
I.D.
O.D.
+ 0.015 (0,4)
- 0.010 (0,3)
Laird Technologies
Part No.
8901-0116-XX
O.D.
0.375 (9,5)
I.D.
0.240 (6,1)
8904-0116-XX
8905-0116-XX
8906-0116-XX
0.375 (9,5)
0.375 (9,5)
0.375 (9,5)
0.240 (6,1)
0.240 (6,1)
I.D.
0.240 (6,1)
8907-0116-XX
8901-0117-XX
8905-0117-XX
0.375 (9,5)
0.375 (9,5)
0.375 (9,5)
0.240 (6,1)
0.187 (4,8)
0.187 (4,8)
0.250 (6,4)
0.032 (0,8)
0.062 (1,6)
8903-0117-XX
8902-0117-XX
8911-0117-XX
0.375 (9,5)
0.375 (9,5)
0.375 (9,5)
0.187 (4,8)
0.187 (4,8)
0.187 (4,8)
0.093 (2,4)
0.125 (3,2)
0.156 (4,0)
8912-0117-XX
8904-0117-XX
8909-0102-XX
0.375 (9,5)
0.375 (9,5)
0.459 (11,7)
0.187 (4,8)
0.187 (4,8)
0.335 (8,5)
0.187 (4,7)
0.250 (6,4)
0.032 (0,8)
8901-0102-XX
8910-0102-XX
8902-0102-XX
0.459 (11,7)
0.459 (11,7)
0.459 (11,7)
0.335 (8,5)
0.335 (8,5)
0.335 (8,5)
0.062 (1,6)
0.093 (2,4)
0.125 (3,3)
8911-0102-XX
8912-0102-XX
0.459 (11,7)
0.459 (11,7)
0.335 (8,5)
0.335 (8,5)
0.156 (4,0)
0.187 (4,7)
8905-0102-XX
8902-0110-XX
8903-0110-XX
0.459 (11,7)
0.500 (12,7)
0.500 (12,7)
0.335 (8,5)
0.250 (6,4)
0.172 (4,4)
0.062 (1,6)
8904-0110-XX
8901-0110-XX
0.500 (12,7)
0.500 (12,7)
Laird Technologies
0.500 (12,7) Part No.
0.172 (4,4)
0.172 (4,4)
0.093 (2,4)
0.125 (3,2)
8904-0178-XX
0.500 (12,7)
8905-0178-XX
0.500 (12,7)
8906-0178-XX
0.500 (12,7)
8907-0178-XX
0.500 (12,7)
I.D.
0.156 (4,0)
0.187 (4,7) 0.125 (3,2)
0.250 (6,4) 0.125 (3,2)
0.032 (0,8) 0.125 (3,2)
0.062 (1,6) 0.125 (3,2)
8908-0178-XX
0.500 (12,7)
8909-0178-XX
0.500 (12,7)
8910-0178-XX
0.500 (12,7)
8904-0107-XX
0.500 (12,7)
8902-0107-XX
0.500 (12,7)
8905-0107-XX
0.500 (12,7)
8901-0107-XX
0.500 (12,7)
8906-0107-XX
0.500 (12,7)
8907-0107-XX
0.500 (12,7)
0.15
0.18
0.25
0.03
0.06
0.09
0.12
0.15
0.18
8908-0107-XX
0.500 (12,7)
8902-0109-XX
0.500 (12,7)
8904-0109-XX
0.500 (12,7)
8905-0109-XX
0.500 (12,7)
8906-0109-XX
0.500 (12,7)
8907-0109-XX
0.500 (12,7)
8903-0109-XX
0.500 (12,7)
8908-0109-XX
0.500 (12,7)
8902-0118-XX
0.500 (12,7)
8906-0118-XX
0.500 (12,7)
8907-0118-XX
0.500 (12,7)
8904-0118-XX
0.500 (12,7)
8908-0118-XX
0.500 (12,7)
8901-0118-XX
0.500 (12,7)
8909-0118-XX
0.500 (12,7)
8902-0116-XX
0.500 (12,7)
8903-0116-XX
0.500 (12,7)
0.25
0.03
0.06
0.09
0.12
0.15
0.18
0.25
0.03
0.06
0.09
0.12
0.15
0.18
0.25
0.03
0.06
Laird Technologies
Part No.
O.D.
I.D.
Free Height
Maximum T
8904-0178-XX
8905-0178-XX
8906-0178-XX
0.200 (5,1)
0.200 (5,1)
0.200 (5,1)
0.125 (3,2)
0.125 (3,2)
0.125 (3,2)
0.032 (0,8)
0.062 (1,6)
0.093 (2,4)
8907-0178-XX
8908-0178-XX
8909-0178-XX
0.200 (5,1)
0.200 (5,1)
0.200 (5,1)
0.125 (3,2)
0.125 (3,2)
0.125 (3,2)
0.125 (3,2)
0.156 (4,0)
0.187 (4,7)
8910-0178-XX
8904-0107-XX
0.200 (5,1)
0.223 (5,7)
0.125 (3,2)
0.052 (1,3)
0.250 (6,4)
0.032 (0,8)
8906-0101-XX
8908-0101-XX
8909-0101-XX
8902-0107-XX
0.223 (5,7)
0.052 (1,3)
0.062 (1,6)
8902-0101-XX
8905-0107-XX
0.223 (5,7)
0.052 (1,3)
0.093 (2,4)
8901-0107-XX
8906-0107-XX
0.223 (5,7)
0.223 (5,7)
0.052 (1,3)
0.052 (1,3)
0.125 (3,2)
0.156 (4,0)
8908-0122-XX
8909-0122-XX
8907-0107-XX
0.223 (5,7)
0.052 (1,3)
0.187 (4,7)
8908-0107-XX
8902-0109-XX
0.223 (5,7)
0.225 (5,7)
0.052 (1,3)
0.120 (3,0)
0.250 (6,4)
0.032 (0,8)
8904-0109-XX
0.225 (5,7)
0.120 (3,0)
0.062 (1,6)
8905-0109-XX
8906-0109-XX
0.225 (5,7)
0.225 (5,7)
0.120 (3,0)
0.120 (3,0)
0.093 (2,4)
0.125 (3,2)
8907-0109-XX
0.225 (5,7)
0.120 (3,0)
0.156 (4,0)
8903-0109-XX
8908-0109-XX
0.225 (5,7)
0.225 (5,7)
0.120 (3,0)
0.120 (3,0)
0.187 (4,7)
0.250 (6,4)
8902-0118-XX
0.255 (6,5)
0.150 (3,8)
0.032 (0,8)
8906-0118-XX
8907-0118-XX
0.255 (6,5)
0.255 (6,5)
0.150 (3,8)
0.150 (3,8)
0.062 (1,6)
0.093 (2,4)
8904-0118-XX
0.255 (6,5)
0.150 (3,8)
0.125 (3,2)
8908-0118-XX
8901-0118-XX
0.255 (6,5)
0.255 (6,5)
0.150 (3,8)
0.150 (3,8)
0.156 (4,0)
0.187 (4,7)
8909-0118-XX
0.255 (6,5)
0.150 (3,8)
0.250 (6,4)
8902-0116-XX
8903-0116-XX
0.375 (9,5)
0.375 (9,5)
0.240 (6,1)
0.240 (6,1)
0.032 (0,8)
0.062 (1,6)
www.lairdtech.com
8905-0110-XX
8906-0110-XX
8907-0110-XX
8907-0101-XX
8904-0101-XX
8901-0101-XX
8910-0122-XX
8903-0122-XX
8911-0122-XX
8912-0122-XX
8902-0122-XX
8904-0105-XX
8918-0105-XX
8919-0105-XX
8909-0105-XX
8903-0105-XX
8920-0105-XX
8910-0105-XX
8902-0108-XX
8907-0108-XX
8908-0108-XX
8909-0108-XX
8910-0108-XX
8906-0108-XX
8911-0108-XX
Free Height
Maximum T
0.093 (2,4)
O.D.
0.125 (3,2)
0.156 (4,0)
0.187 (4,7)
+
-0
ELECTROGROUND
SIZES,
AND TOLER
0.172WASHER
(4,4)
0.032MATERIALS
(0,8)
TABLE 1. DIMENSIONS
Free
Maxim
0.03
0.06
0.09
0.12
EMI ESSENTIALS
Free Height
Maximum T
Laird Technologies
Part No.
O.D.
I.D.
Free Height
Maximum T
0.525 (13,3)
0.525 (13,3)
0.355 (9,0)
0.355 (9,0)
0.032 (0,8)
0.062 (1,6)
8904-0125-XX
8910-0125-XX
8911-0125-XX
0.525 (13,3)
0.525 (13,3)
0.525 (13,3)
0.355 (9,0)
0.355 (9,0)
0.355 (9,0)
0.093 (2,4)
0.125 (3,2)
0.156 (4,0)
8903-0145-XX
8909-0145-XX
8911-0145-XX
0.800 (20,3)
0.800 (20,3)
0.800 (20,3)
0.650 (16,5)
0.650 (16,5)
0.650 (16,5)
0.032 (0,8)
0.062 (1,6)
0.093 (2,4)
8912-0125-XX
8903-0125-XX
8902-0129-XX
0.525 (13,3)
0.525 (13,3)
0.625 (15,9)
0.355 (9,0)
0.355 (9,0)
0.250 (6,4)
0.187 (4,8)
0.250 (6,4)
0.032 (0,8)
8906-0145-XX
8911-0145-XX
8912-0145-XX
0.800 (20,3)
0.800 (20,3)
0.800 (20,3)
0.650 (16,5)
0.650 (16,5)
0.650 (16,5)
0.125 (3,2)
0.156 (4,0)
0.187 (4,7)
8903-0129-XX
8904-0129-XX
0.625 (15,9)
0.625 (15,9)
0.250 (6,4)
0.250 (6,4)
0.062 (1,6)
0.093 (2,4)
8904-0145-XX
8912-0150-XX
8913-0150-XX
0.800 (20,3)
1.000 (25,4)
1.000 (25,4)
0.650 (16,5)
0.750 (19,1)
0.750 (19,1)
0.250 (6,4)
0.032 (0,8)
0.062 (1,6)
8905-0129-XX
8906-0129-XX
8907-0129-XX
0.625 (15,9)
0.625 (15,9)
0.625 (15,9)
0.250 (6,4)
0.250 (6,4)
0.250 (6,4)
0.125 (3,2)
0.156 (4,0)
0.187 (4,7)
8914-0150-XX
8915-0150-XX
8916-0150-XX
1.000 (25,4)
1.000 (25,4)
1.000 (25,4)
0.750 (19,1)
0.750 (19,1)
0.750 (19,1)
0.093 (2,4)
0.125 (3,2)
0.156 (4,0)
8908-0129-XX
8911-0130-XX
8914-0130-XX
0.625 (15,9)
0.625 (15,9)
0.625 (15,9)
0.250 (6,4)
0.370 (9,4)
0.370 (9,4)
0.250 (6,4)
0.032 (0,8)
0.062 (1,6)
8903-0150-XX
8902-0150-XX
1.000 (25,4)
1.000 (25,4)
0.750 (19,1)
0.750 (19,1)
0.187 (4,7)
0.250 (6,4)
8904-0157-XX
1.140 (29,0)
0.826 (21,0)
0.032 (0,8)
8913-0130-XX
8915-0130-XX
8901-0130-XX
0.625 (15,9)
0.625 (15,9)
0.625 (15,9)
0.370 (9,4)
0.370 (9,4)
0.370 (9,4)
0.093 (2,4)
0.125 (3,2)
0.156 (4,0)
8903-0157-XX
8905-0157-XX
1.140 (29,0)
1.140 (29,0)
0.826 (21,0)
0.826 (21,0)
0.062 (1,6)
0.093 (2,4)
8917-0130-XX
8904-0130-XX
8903-0180-XX
0.625 (15,9)
0.625 (15,9)
0.625 (15,9)
0.370 (9,4)
0.370 (9,4)
0.460 (11,7)
0.187 (4,7)
0.250 (6,4)
0.032 (0,8)
8906-0157-XX
8907-0157-XX
8908-0157-XX
1.140 (29,0)
1.140 (29,0)
1.140 (29,0)
0.826 (21,0)
0.826 (21,0)
0.826 (21,0)
0.125 (3,2)
0.156 (4,0)
0.187 (4,7)
8904-0180-XX
8905-0180-XX
0.625 (15,9)
0.625 (15,9)
0.460 (11,7)
0.460 (11,7)
0.062 (1,6)
0.093 (2,4)
8909-0157-XX
8902-0156-XX
8903-0156-XX
1.140 (29,0)
1.250 (31,8)
1.250 (31,8)
0.826 (21,0)
1.000 (25,4)
1.000 (25,4)
0.250 (6,4)
0.032 (0,8)
0.062 (1,6)
8906-0180-XX
8907-0180-XX
8901-0180-XX
0.625 (15,9)
0.625 (15,9)
0.625 (15,9)
0.460 (11,7)
0.460 (11,7)
0.460 (11,7)
0.125 (3,2)
0.156 (4,0)
0.187 (4,7)
8904-0156-XX
8905-0156-XX
8906-0156-XX
1.250 (31,8)
1.250 (31,8)
1.250 (31,8)
1.000 (25,4)
1.000 (25,4)
1.000 (25,4)
0.093 (2,4)
0.125 (3,2)
0.156 (4,0)
8908-0180-XX
8903-0135-XX
8918-0135-XX
0.625 (15,9)
0.625 (15,9)
0.625 (15,9)
0.460 (11,7)
0.490 (12,4)
0.490 (12,4)
0.250 (6,4)
0.032 (0,8)
0.062 (1,6)
8907-0156-XX
8901-0156-XX
1.250 (31,8)
1.250 (31,8)
1.000 (25,4)
1.000 (25,4)
0.187 (4,7)
0.250 (6,4)
8919-0135-XX
8911-0135-XX
0.625 (15,9)
0.625 (15,9)
0.490 (12,4)
0.490 (12,4)
0.093 (2,4)
0.125 (3,2)
8902-0171-XX
8903-0171-XX
8904-0171-XX
1.254 (31,9)
1.254 (31,9)
1.254 (31,9)
1.114 (28,3)
1.114 (28,3)
1.114 (28,3)
0.032 (0,8)
0.062 (1,6)
0.093 (2,4)
8905-0171-XX
1.254 (31,9)
1.114 (28,3)
0.125 (3,2)
8916-0135-XX
8902-0135-XX
0.625 (15,9)
0.625 (15,9)
0.490 (12,4)
0.490 (12,4)
0.156 (4,0)
0.187 (4,7)
8906-0171-XX
8907-0171-XX
1.254 (31,9)
1.254 (31,9)
1.114 (28,3)
1.114 (28,3)
0.156 (4,0)
0.187 (4,7)
8906-0135-XX
0.625 (15,9)
0.490 (12,4)
0.250 (6,4)
8908-0171-XX
1.254 (31,9)
1.114 (28,3)
0.250 (6,4)
8902-0137-XX
8903-0137-XX
0.689 (17,5)
0.689 (17,5)
0.374 (9,5)
0.374 (9,5)
0.032 (0,8)
0.062 (1,6)
8905-0168-XX
8906-0168-XX
1.375 (34,9)
1.375 (34,9)
0.875 (22,2)
0.875 (22,2)
0.032 (0,8)
0.062 (1,6)
8904-0137-XX
0.689 (17,5)
0.374 (9,5)
0.093 (2,4)
8907-0168-XX
1.375 (34,9)
0.875 (22,2)
0.093 (2,4)
8905-0137-XX
8901-0137-XX
0.689 (17,5)
0.689 (17,5)
0.374 (9,5)
0.374 (9,5)
0.125 (3,2)
0.156 (4,0)
8904-0168-XX
8908-0168-XX
1.375 (34,9)
1.375 (34,9)
0.875 (22,2)
0.875 (22,2)
0.125 (3,2)
0.156 (4,0)
8906-0137-XX
0.689 (17,5)
0.374 (9,5)
0.187 (4,7)
8901-0168-XX
1.375 (34,9)
0.875 (22,2)
0.187 (4,7)
8907-0137-XX
0.689 (17,5)
0.374 (9,5)
0.250 (6,4)
8903-0177-XX
8901-0177-XX
0.750 (19,1)
0.750 (19,1
0.187 (4,7)
0.187 (4,7)
0.032 (0,8)
0.062 (1,6)
8909-0168-XX
8906-0170-XX
1.375 (34,9)
1.375 (34,9)
0.875 (22,2)
1.125 (28,6)
0.250 (6,4)
0.032 (0,8)
8907-0170-XX
1.375 (34,9)
1.125 (28,6)
0.062 (1,6)
8904-0177-XX
0.750 (19,1)
0.187 (4,7)
0.093 (2,4)
8905-0177-XX
8906-0177-XX
0.750 (19,1)
0.750 (19,1)
0.187 (4,7)
0.187 (4,7)
0.125 (3,2)
0.156 (4,0)
8908-0170-XX
8901-0170-XX
1.375 (34,9)
1.375 (34,9)
1.125 (28,6)
1.125 (28,6)
0.093 (2,4)
0.125 (3,2)
8909-0170-XX
1.375 (34,9)
1.125 (28,6)
0.156 (4,0)
8907-0177-XX
0.750 (19,1)
0.187 (4,7)
0.187 (4,7)
8908-0177-XX
8910-0140-XX
0.750 (19,1)
0.750 (19,1)
0.187 (4,7)
0.490 (12,4)
0.250 (6,4)
0.032 (0,8)
8904-0170-XX
8902-0170-XX
1.375 (34,9)
1.375 (34,9)
1.125 (28,6)
1.125 (28,6)
0.187 (4,7)
0.250 (6,4)
8906-0174-XX
1.540 (39,1)
1,340 (34,0)
0.032 (0,8)
8907-0140-XX
0.750 (19,1)
0.490 (12,4)
0.062 (1,6)
8911-0140-XX
8912-0140-XX
0.750 (19,1)
0.750 (19,1)
0.490 (12,4)
0.490 (12,4)
0.093 (2,4)
0.125 (3,2)
8907-0174-XX
8908-0174-XX
1.540 (39,1)
1.540 (39,1)
1,340 (34,0)
1,340 (34,0)
0.062 (1,6)
0.093 (2,4)
8902-0174-XX
1.540 (39,1)
1,340 (34,0)
0.125 (3,2)
8913-0140-XX
0.750 (19,1)
0.490 (12,4)
0.156 (4,0)
8901-0140-XX
8902-0140-XX
0.750 (19,1)
0.750 (19,1)
0.490 (12,4)
0.490 (12,4)
0.187 (4,7)
0.250 (6,4)
8909-0174-XX
8910-0174-XX
8905-0174-XX
1.540 (39,1)
1.540 (39,1)
1.540 (39,1)
1,340 (34,0)
1,340 (34,0)
1,340 (34,0)
0.156 (4,0)
0.187 (4,7)
0.250 (6,4)
Laird Technologies
Part No.
O.D.
8908-0125-XX
8909-0125-XX
www.lairdtech.com
73
EMI ESSENTIALS
O.D.
O.D.
1.625
1.625 (41,3)
(41,3)
1.625
1.625 (41,3)
(41,3)
I.D.
I.D.
1.125
1.125 (28,6)
(28,6)
1.125
1.125 (28,6)
(28,6)
FFrreeee HHeeigighhtt
Maximum
MaximumT
T
0.032
0.032 (0,8)
(0,8)
0.062
0.062 (1,6)
(1,6)
8905-0175-XX
8905-0175-XX
8906-0175-XX
8906-0175-XX
1.625
1.625 (41,3)
(41,3)
1.625
1.625 (41,3)
(41,3)
1.125
1.125 (28,6)
(28,6)
1.125
1.125 (28,6)
(28,6)
0.093
0.093 (2,4)
(2,4)
0.125
0.125 (3,2)
(3,2)
8907-0175-XX
8907-0175-XX
8918-0175-XX
8918-0175-XX
8909-0175-XX
8909-0175-XX
1.625
1.625 (41,3)
(41,3)
1.625
1.625 (41,3)
(41,3)
1.625
1.625 (41,3)
(41,3)
1.125
1.125 (28,6)
(28,6)
1.125
1.125 (28,6)
(28,6)
1.125
1.125 (28,6)
(28,6)
0.156
0.156 (4,0)
(4,0)
0.187
0.187 (4,7)
(4,7)
0.250
0.250 (6,4)
(6,4)
8902-0176-XX
8902-0176-XX
8901-0176-XX
8901-0176-XX
8903-0176-XX
8903-0176-XX
1.884
1.884 (47,9)
(47,9)
1.884
1.884 (47,9)
(47,9)
1.884
1.884 (47,9)
(47,9)
1.760
1.760 (44,7)
(44,7)
1.760
1.760 (44,7)
(44,7)
1.760
1.760 (44,7)
(44,7)
0.032
0.032 (0,8)
(0,8)
0.062
0.062 (1,6)
(1,6)
0.093
0.093 (2,4)
(2,4)
8904-0176-XX
8904-0176-XX
8905-0176-XX
8905-0176-XX
8916-0176-XX
8916-0176-XX
1.884
1.884 (47,9)
(47,9)
1.884
1.884 (47,9)
(47,9)
1.884
1.884 (47,9)
(47,9)
1.760
1.760 (44,7)
(44,7)
1.760
1.760 (44,7)
(44,7)
1.760
1.760 (44,7)
(44,7)
0.125
0.125 (3,2)
(3,2)
0.156
0.156 (4,0)
(4,0)
0.187
0.187 (4,7)
(4,7)
8907-0176-XX
8907-0176-XX
1.884
1.884 (47,9)
(47,9)
1.760
1.760 (44,7)
(44,7)
0.250
0.250 (6,4)
(6,4)
TABLE
TABLE 2.
2. MATERIALS
MATERIALS
M
Maatteerriaiall CCooddee
4400
4422
4433
4444
4466
TTyyppee
BBeerryylliluiumm CCooppppeerr
M
Moonneel
l
AAlulummininuumm
TTinin PPlalatteedd SStteeeell
SSttaaininlelessss SStteeeell
W
Wiriree SSppeeccifificicaattioionn
2255AAlloloyy QQQQCC--553300
QQN-281
QQN-281 Class
ClassAA
55005566AAlloloyy
AASSTTM
M BB552200
330044
Other
Other alloys
alloys available
available upon
upon request.
request.
TABLE
TABLE 3.
3. TOLERANCES
TOLERANCES
TT SSizizeess
0.030
0.030 (0,8)
(0,8) to
to 0.062
0.062 (1,6)
(1,6)
0.062
0.062 (1,6)
(1,6) to
to 1.0
1.0 (25,4)
(25,4)
1.0
1.0 (25,4)
(25,4) to
to 2.0
2.0 (50,8)
(50,8)
OO..DD..
++
0.010 ((++
0,3)
-- 0.010
--0,3)
++
0.015 ((++
0,4)
-- 0.015
--0,4)
++
0.020 ((++
0,5)
-- 0.020
--0,5)
II..DD..
++
0.010 ((++
0,3)
-- 0.010
--0,3)
++
0.015 ((++
0,4)
-- 0.015
--0,4)
++
0.020 ((++
0,5)
-- 0.020
--0,5)
How
How to
to Specify
Specify
1.
1. From
From Table
Table 11 on
on pages
pages 25
25 to
to 27,
27, determine
determine the
the O.D.,
O.D., the
the I.D.,
I.D., and
and the
the
thickness
thickness T
T of
of the
the ElectroGround
ElectroGround washer
washer that
that suits
suits the
the specific
specific
application.
application. Note:
Note: Please
Please consult
consult Laird
Laird Technologies
Technologies sales
sales department
department for
for
sizes
sizes not
not shown
shown in
in Table
Table 1.
1.
2.
2. From
From Table
Table 2,
2, insert
insert material
material code
code in
in place
place of
of XX
XX in
in base
base part
part number.
number.
3.
3. For
For tolerances
tolerances O.D.
O.D. and
and I.D.
I.D. refer
refer to
to Table
Table 3.
3.
Example:
Example:
1.
1. Dimensions
Dimensions required:
required: O.D.
O.D. == 0.200
0.200 I.D.
I.D. == 0.125,
0.125, and
and Thickness
Thickness == 0.032
0.032
(from
(from Table
Table 1).
1).
2.
2. Base
Base Part
Part Number:
Number: 8904-0178-XX
8904-0178-XX (from
(from Table
Table 1).
1).
3.
3. Material
Material required
required isis Beryllium
Beryllium Copper
Copper Code
Code 40
40 (from
(from Table
Table 2).
2).
4.
4. Full
Full part
part number
number isis 8904-0178-40.
8904-0178-40.
74
All
All dimensions
dimensions shown
shown are
are inin inches
inches (millimeters)
(millimeters) unless
unless otherwise
otherwise specified.
specified.
www.lairdtech.com
EMI ESSENTIALS
www.lairdtech.com
Width
8300-0025-44
8300-0038-44
8300-0050-44
8300-0075-44
8300-0100-44
8300-0150-44
8300-0175-44
8300-0225-44
75
EMI ESSENTIALS
CONDUCTIVE FABRIC
FLECTRON PRODUCTS DATA
Flectron metallized fabric combines
highly conductive metals with lightweight
fabric to meet a diverse range of EMI/RFI
Product No.
shielding requirements.
Manufactured with Laird patented
Ni/Cu Polyester Nonwoven
3027-217
technology, Flectron metallized fabric
Ni/Cu Polyester Nonwoven UL94 VTM-0
3027-235
is available in various woven and
Ni/Cu
Polyester
Taffeta
3035-535
non-woven substrate configurations.
SUMMARY
Surface
Nominal Thickness
Resistivity1
Inches (mm)
(Ohms / square)
(ASTM F390*)
Shielding2 at
100 MHz/1GHz
(dB)
Tensile Strength3
CD/MD4 (lb/in)
(ASTM D5035*)
Weight
(oz / yd2)
(LT 500)
Max. Short
Duration
Temperature (C)
0.016 (0.4)
< 0.07
105/90
7.5/18.5
2.8 4.5
210
0.016 (0.4)
< 0.07
100/100
7.5/18.5
3.6 - 5.7
210
0.0045 (0.114)
< 0.07
80/80
50/75
2.2 3.1
210
3035-216
0.008 (0.2)
< 0.07
80/70
50/75
100
3070-500
0.007 (0.178)
< 0.1
70/60
20/20
1.3 2.3
210
3050-525
0.005 (0.1)
< 0.07
85/75
25/50
2.1 2.7
200
3050-517
0.008 (0.2)
< 0.07
85/75
25/50
5.0 6.0
100
3078-500
0.024 (0.6)
< 0.07
60/65
280/805
7 10
185
Laird uses a patented technology for applying thin metal coatings of copper and nickel to woven and nonwoven fabrics. As a result, Flectron metallized materials have
the flexibility, conformability and breathability of a fabric with the electrical properties of a metal. This means low surface and through resistivity and excellent shielding
effectiveness.
For specific material properties, see data summary chart
NA = Not Applicable
1
Product Specifications
2
Measured per Typical values
3
Typical values for unplated fabric.
Product No.
Material
Description
Application
3027-217
Ni/Cu Polyester
Nonwoven
The base layer is the highly conductive copper, with an outer layer of nickel for
corrosion resistance. Combines the properties of these metals with the lightweight,
flexibility and breathability of a nonwoven material. Offers excellent surface
conductivity, shielding effectiveness, and corrosion resistance.
3027-235
Combines highly conductive copper and corrosion resistant nickel with the
Ni/Cu Polyester
lightweight, flexibility and breathability of a nonwoven material. Offers excellent
Nonwoven UL94 VTM-0 surface conductivity, shielding effectiveness and corrosion resistance. This product
achieves the UL94 VTM-0 flammability rating.
3035-535
Combines highly conductive copper and corrosion resistant nickel with the
lightweight, flexibility, conformability, strength and uniform appearance of a woven.
Nickel/Copper Polyester Taffeta offers excellent surface conductivity, shielding
effectiveness, and reflectivity.
3035-216
Combines highly conductive copper and corrosion resistant nickel with the
lightweight, flexibility, conformability, strength and uniform appearance of a woven
material. Provides excellent surface conductivity, shielding effectiveness and a UL94
V0 rating.
Combines highly conductive copper and corrosion resistant nickel with the
lightweight, flexibility, conformability, breathability and uniform appearance of a
knitted mesh. Mesh offers excellent surface conductivity, shielding effectiveness, and
reflectivity for a variety of applications.
3050-525
This technology combines highly conductive copper and corrosion resistant nickel
with the lightweight, drapability, strength, flexibility, conformability, and attractive
appearance of a Nylon Ripstop. Nickel/Copper Nylon Ripstop offers excellent surface
conductivity, shielding effectiveness, and reflectivity.
3050-517
This technology combines highly conductive copper and corrosive resistant nickel
with the drapability, strength, flexibility, and attractive appearance of a Nylon
Ripstop fabric. Provides excellent surface conductivity, shielding effectiveness, and
UL94 V0 rating.
3070-500
3078-500
Combines highly conductive copper and corrosion resistant nickel with the light
Ni/Cu Nylon Nonwoven weight, flexibility and breathability of a nonwoven material. Offers excellent surface
UL94 V0
conductivity, shielding effectiveness and corrosion resistance. This product achieves
the UL94 V0 flammability rating.
76
All dimensions shown are in inches (millimeters) unless otherwise specified.
www.lairdtech.com
EMI ESSENTIALS
3027-532C
Shielding Effectiveness per MIL-STD-285 (mod.)
140
130
120
110
100
90
80
70
60
50
40
30
20
10
0
00
00
00
10
Frequency (MHz)
10
00
10
10
10
PHYSICAL PROPERTIES
Substrate
Metal
Thickness
(ASTM D1777)
Total Weight
oz./yd2
Composite Polyester
Non-woven Fabric
and Foil
Fabric: Nickel/Copper
Foil: Aluminum
51
(130)
ELECTRICAL PROPERTIES
Shielding Effectiveness dB (typical)
Surface Resistivity ASTM F390
ohms/square
< 0.07
>115*
>122*
>115*
400 MHz
>107*
* Values exceed the dynamic range of the test equipment and were measured in actual MRI shielded enclosures.
MECHANICAL PROPERTIES
Tensile Strength CMD/MD
(ASTM D5035)
lb./in (N/100 mm)
Elongation, MD
(ASTM D5035)
20/60 (350/1050)
8%
77
www.lairdtech.com
EMI ESSENTIALS
CONDUCTIVE TAPE
CONDUCTIVE FABRIC SHIELDING TAPE
Laird conductive fabric shielding tapes offer exceptional conformability and conductivity for dynamic flex applications. Conductive tapes are
constructed of nickel/copper metallized fabric with a conductive pressure sensitive adhesive (PSA). This reliable tape design provides outstanding
shielding performance while offering superior abrasion and corrosion resistance under high dynamic flex conditions.
Significant advantages over other fabric and foil shielding tapes include:
Available UL510 flame rating.
Thinner design provides superior flexibility and durability.
High conductivity and shielding effectiveness.
Adhesive system provides high peel strength.
Easy die-cutting and processing.
Superb adhesion of nickel copper plating.
Eliminates the potential of injury due to the sharp edges
of metal foil tapes.
EMI shielding tape is available in standard roll widths from 0.394" (10 mm) to 3.937"(100 mm) in 0.197" (5 mm) increments and roll lengths
of 65.62' (20 M). Master rolls are available in sizes up to 1.0 meter widths and 20 meter lengths. For your unique design requirements, custom
die-cut parts are also available.
Some typical applications for EMI shielding tapes include:
Shielding cables on notebook computers, copiers or other electronic equipment.
Fix-it applications in test laboratories.
Shielding over a component in which high conformability is essential.
Shielding or grounding in weight sensitive applications.
Shielding or grounding for electronic equipment where vibration may be present during operation.
TAPE CONSTRUCTION *
Carrier
Adhesive
Liner
Kraft Paper
PERFORMANCE CHARACTERISTICS *
78
50 lb / in.
XY Sheet Resistivity
(ASTM F390)
Peel Strength
Abrasion Resistance
(ASTM D3886)
Temperature Range
120C
Shielding Effectiveness
100 MHz @ 70 dB
1 GHz @ 80 dB
3 GHz @ 90 dB
Z-Axis Resistivity
Shelf Life
* Properties for standard tapes. Other tape properties available upon request.
www.lairdtech.com
ORDERING INFORMATION:
86-726
86-785
86-203
86-205
87-580
DS005
D6-785FX
76-750
Standard Tape
Standard Tape
Black Tape
Black Tape
UL510 Rated
Double Sided Tape
Double Sided Tape
Thin Tape
EMI ESSENTIALS
INTRODUCTION TO ELECTRICALLY
CONDUCTIVE ELASTOMERS
OVERVIEW
1.
2.
3.
4.
5.
6.
When any two flat, but rigid surfaces are brought together,
slight surface irregularities on each surface prevent them from
meeting completely at all points. These irregularities may be
extremely minute, yet may provide a leakage path for gas or
liquid under pressure, and for high frequency electromagnetic
energy. This problem remains in flange sealing even when very
high closure force is applied.
However, when a gasket fabricated of resilient material is
installed between the mating surfaces, and even minimal
closure pressure is applied, the resilient gasket conforms to the
irregularities in both mating surfaces. As a result, all surface
imperfections and potential leak paths across the joint area
are sealed completely against pneumatic and fluid pressure or
penetration by environmental gases. If the gasket is conductive
as well as resilient, with conductive matrix distributed
throughout its total volume in mesh or particle form, the joint
can be additionally sealed against penetration by, or exit of,
electromagnetic energy.
79
www.lairdtech.com
EMI ESSENTIALS
Ag (Silver)
AgCu
AgNi
AgAl
AgGlass
Ni
NiAl
Silicone
ECE082/083
ECE080/094
ECE084
ECE081
ECE085
ECE100
ECE032
ECE072/093
ECE087
NCE220
Fluorosilicone
-NA-
ECE088
ECE090
ECE050/089
ECE011
-NA-
-NA-
ECE092
-NA-
-NA-
EPDM
biohazard
resistant
-NA-
-NA-
-NA-
ECE096
-NA-
-NA-
-NA-
ECE095
ECE013
-NA-
AgCu
AgNi
AgAl
NiGraphite
Non-Conductive
RXP - room
temperature cure
simple dispense
process
SNK55
SNN60
SNL60
SNC70
SIL25
SNK60
SNN65
SNL70
SNC70
SIL35
80
www.lairdtech.com
EMI ESSENTIALS
Selection Process
Conclusion
Silicone
"Hybrid (NCE+ECE),
ECE81(Ag/Al)
or ECE93(Ni/Graphite) "
Closure force
Decide dimension
Double D co-extrusion or
custom design
But a friction fit design can also be done for easy assembly and cost saving. Example
81
www.lairdtech.com
EMI ESSENTIALS
TABLE 4
Elastomer Type
Low Temperature
Upper Temperature
EPDM
-58F (-50C)
257F (125C)
Silicone
-49F (-45C)
392F (200C)
Fluorosilicone
-67F (-55C)
347F (175C)
TABLE 2
Material Thickness
*10%
15%
20%
0.045 (1,1)
40 (0,3)
100 (0,7)
155 (1,1)
280 (1,9)
0.062 (1,6)
85 (0,6)
165 (1,1)
240 (1,7)
345 (2,4)
0.125 (3,2)
115 (0,8)
180 (1,2)
245 (1,7)
290 (2,0)
TABLE 5
Fluid
Silicone
Fluorosilicone
EPDM
Deflection
Impermeability to
Gases
Poor
Fair
Good
Flat Strip
5-10 Percent
Solid O
20-25 Percent
Excellent
Excellent
Excellent
Solid D
15-20 Percent
ASTM 1 Oil
Fair
Good
Don't Use
Hollow O
20-50 Percent
Hydraulic Fluids
(Organic)
Fair
Good
Don't Use
Hollow D
25-50 Percent
Hydraulic Fluids
(Phosphate ester)
Fair
Fair
Excellent
Hollow P
25-50 Percent
Interference Fit
15-25 Percent
Hydrocarbon Fuels
Don't Use
Good
Don't Use
Dilute Acids
Fair
Good
Good
Concentrated Acids
Don't Use
Don't Use
Fair / Good
Dilute Bases
Fair
Good
Excellent
Concentrated Bases
Don't Use
Don't Use
Good
Esters / Ketones
Don't Use
Don't Use
Excellent
DS-2 (Decontaminating
Fluid)
Poor
Poor
Good
STB (Decontaminating
Fluid)
Good
Good
Good
Low Temperature
Excellent
Excellent
Excellent
High Temperature
Excellent
Good
Good
Compression Set
Good
Good
Good
Radiation Resistance
Good
Poor
Good
Substantial amount of
weight loss on metal coupon;
between 0.50% and 1.25%.
Not acceptable in corrosive
environments; for less corrosive applications consult with
Laird applications engineer.
TABLE 3
Metal
Substrate
80
Sil AG/CU
81
Sil AG/AL
84
Sil AG/NI
85
Sil AG/
Glass
89
FSil AG/AL
92
FSil NI/
Graphite
93
Sil NI/
Graphite
96
EPDM
AG/AL
Galvalume
Stainless Steel
Chromated AI
82
www.lairdtech.com
EMI ESSENTIALS
TABLE 6
PARAMETER
TEST METHOD
Ni/graphite
silver/
copper
silver/Al
silver
silver
silver/
nickel
silver/glass
carbon
Elastomer
silicone
silicone
silicone
silicone
silicone
silicone
silicone
silicone
EcE Name
EcE72
EcE80
EcE81
EcE82
EcE83
EcE84
EcE85
EcE87
Filler
Electrical Properties
Volume Resistivity,
cm, max
MIL-DTL-83528C
para 4.5.10
0.100
0.004
0.008
0.002
0.010
0.005
0.006
5.0
MIL-DTL-83528C
para 4.5.12
100
120
100
120
80
100
100
30
ASTM D792
2.30
3.40
2.00
3.50
1.80
4.00
1.90
1.30
ASTM D2240
75
65
65
65
45
75
65
75
ASTM D412
280
200
200
300
150
200
200
700
Physical Properties
Elongation
Tear Strength, ppi, min
Compression Set, max
ASTM D412
150%
55
30
50
50-250%
20
30
50
ASTM D395
30%
32%
32%
45%
35%
32%
30%
45%
MIL-DTL-83528C
para 4.5.15
160
125
160
160
160
125
160
160
ASTM D1329
-55
-55
-55
-55
-55
-55
-55
-55
UL 94
V-0
MIL-DTL-83528C
para 4.5.15
0.010
0.010
0.010
0.015
0.010
0.015
7.0
After Break,
cm, max
MIL-DTL-83528C
para 4.5.9
0.008
0.015
0.010
0.020
0.010
0.009
7.0
During Vibration,
cm, max
MIL-DTL-83528C
para 4.5.13
0.006
0.012
0.010
0.015
0.010
0.009
N/A
MIL-DTL-83528C
para 4.5.16
0.010
0.010
0.010
0.015
0.010
0.015
N/A
ASTM D575
3.5
3.5
2.5
8.0
3.5
3.5
3.5
MIL-DTL-83528C
para 4.5.17
NS
NS
NS
NS
NS
NS
NS
Flame Retardance
UL 94 HB
(File No.
E203 070
Electrical Stability
Compression / Deflection,
%, min
Fluid Immersion1
Manufacturing Processes
extruded profiles
Color
Mil-DTL-83528 Type
gray
tan
tan
beige
beige
tan
tan
black
www.lairdtech.com
3
4
5
83
EMI ESSENTIALS
Filler
Ni/
graphite
silver/
copper
nickel
N/A
carbon
Ni/
graphite
silver/Al
silver/
glass
Elastomer
silicone
silicone
silicone
silicone
EPDM
EPDM
EPDM
EcE Name
EcE93
EcE94
EcE100
NCE220
EcE13
EcE95
EcE96
EcE11
EcE50
EcE88
EcE89
EcE90
EcE92
0.100
0.005
0.200
Non
30
0.100
0.010
0.010
0.012
0.010
0.012
0.005
0.100
100
120
Conductive
30
70
90
90
95
110
100
100
100
1.90
3.60
4.00
1.20
1.20
2.20
2.20
2.00
2.10
4.10
2.20
4.10
2.20
Hardness, Shore
A (7)
55
85
75
70
80
80
80
75
75
75
70
75
75
Tensile Strength,
psi, min
150
400
450
405
2000
200
200
200
200
180
180
300
150
70-260%
60-200%
60-260%
100-300%
60-260%
100-300%
60-250%
silver/Al
silver/
copper
silver/Al
silver/
nickel
Ni/
graphite
Electrical Properties
Volume Resistivity,
cm, max
Shielding Eff, 10
GHz, dB, min
Physical Properties
Density, g/cm3
(0.25)
Elongation
100-300% 100-300%
30
40
50
100
60
60
30
35
30
30
50
40
Compression Set,
max
30%
35%
30%
40%
50%
30%
30%
35%
30%
25%
30%
160
125
160
150
125
125
160
160
160
125
160
160
160
-55
-45
-55
-50
-40
-40
-40
-50
-55
-55
-55
-50
-55
UL 94 HB
(File No.
E203 070
UL 94 HB
(File No.
E203 070
UL 94 HB
(File No.
E203 070
Electrical Stability
After Heat Aging,
cm, max
0.200
0.010
0.400
n/a
40
0.015
0.015
0.015
0.015
0.010
0.200
After Break,
cm, max
0.200
0.010
n/a
0.015
0.015
0.015
0.015
0.010
0.200
During Vibration,
cm, max
0.200
0.010
n/a
0.015
0.015
0.015
0.015
0.010
0.200
After Exposure to
EMP, cm, max
0.100
0.015
n/a
0.015
0.015
0.015
0.010
0.100
Compression /
Deflection, %, min
8.0
2.5
3.0
3.0
3.0
3.0
3.0
3.5
3.5
3.0
5.0
Fluid Immersion1
NS
NS
NS
NS
NS
NS
SUR
SUR
SUR
SUR
SUR
SUR
molded sheet /
diecut parts
molded shapes /
O-rings
Manufacturing Processes
extruded profiles
Color
Mil-DTL-83528 Type
black
tan
dk gray
blue
black
black
tan
tan
tan
tan
blue
tan
dk gray
84
www.lairdtech.com
EMI ESSENTIALS
Rectangular Strips
Page 87
Hollow D-Strips
Page 88
O-StripTubing
Page 89
D-Strips
Page 90
Channel Strips
Page 90
O-Strips
Page 91
P-Strip Tubing
Page 92
CO-EXTRUSION
ELECTROSEAL CONDUCTIVE
ELASTOMER FABRICATED
COMPONENTS
MIL CONNECTOR
GASKETS
D SUBMINIATURE
CONNECTOR SHIELDS
Page 93
Page 95
Page 101
Page 101
FORM-IN-PLACE EMI
DISPENSED GASKETS
METAL IMPREGNATED
MATERIALS
ELECTROCOAT
Page 103
Page 99
Page 102
85
www.lairdtech.com
EMI ESSENTIALS
ELECTROSEAL CONDUCTIVE
ELASTOMER MATERIAL
SHEET MATERIAL
The Table below lists thicknesses and sizes for our molded sheet
material, while Table 3, page 82, shows the compounds available
for all of our conductive silicone elastomers.
ELECTROSEAL CONDUCTIVE
ELASTOMER EMI SHIELDING
Laird electrically conductive elastomer products are ideal
for both military and commercial applications requiring
both environmental sealing and EMI shielding. Compounds
can be supplied in molded or extruded shapes, sheet stock,
custom extruded, or die-cut shapes to meet a wide variety of
applications.
10 X 10 SHEET
8860-0020-100-XX
10 X 15 SHEET
8860-0020-150-XX
15 X 20 SHEET
8860-0020-300-XX
18 X 18 SHEET
N/A
8860-0032-100-XX
8860-0032-150-XX
8860-0032-300-XX
8860-0032-324-XX
8860-0045-100-XX
8860-0045-150-XX
8860-0045-300-XX
8860-0045-324-XX
8860-0062-100-XX
8860-0062-150-XX
8860-0062-300-XX
8860-0062-324-XX
8860-0093-100-XX
8860-0093-150-XX
8860-0093-300-XX
8860-0093-324-XX
8860-0100-100-XX
8860-0100-150-XX
8860-0100-300-XX
8860-0100-324-XX
8860-0125-100-XX
8860-0125-150-XX
8860-0125-300-XX
8860-0125-324-XX
86
www.lairdtech.com
EMI ESSENTIALS
EXTRUSIONS GUIDE
Rectangular Strips
TOLERANCE
0.005 (0,15)
0.008 (0,2)
0.010 (0,3)
0.015 (0,4)
0.020 (0,5)
MIL-DTL-85328
PART NUMBER
M83528/009X001
M83528/009X002
M83528/009X003
M83528/009X004
M83528/009X005
M83528/002X006
M83528/009X007
M83528/009X008
M83528/009X009
M83528/009X010
M83528/009X011
M83528/009X012
M83528/009X013
PART
NUMBER
8861-0100
8861-0179
8861-0181
8861-0105
8861-0110
8861-0115
8861-0120
8861-0121
8861-0167
8861-0193
8861-0125
8861-0173
8861-0174
8861-0136
8861-0175
8861-0183
8861-0172
8861-0131
8861-0182
8861-0130
8861-0188
8861-0135
8861-0140
8861-0142
8861-0141
8861-0145
8861-0184
8861-0189
8861-0150
8861-0103
8861-0169
8861-0192
8861-0155
8861-0160
PART NUMBER
8862-0112
8862-0113
8862-0114
8862-0100
8862-0105
NOMINAL DIMENSIONS
A
0.125 (3,2)
0.200 (5,1)
0.250 (6,4)
0.330 (8,4)
0.375 (9,5)
0.125 (3,2)
0.130 (3,3)
0.250 (6,4)
0.305 (7,7)
0.375 (9,5)
0.078 (2,0)
0.090 (2,3)
0.156 (4,0)
0.125 (3,2)
0.188 (4,8)
NOMINAL DIMENSIONS
A
B
0.063 (1,6)
0.079 (2,0)
0.079 (2,0)
0.095 (2,4)
0.120 (3,0)
0.125 (3,2)
0.156 (4,0)
0.187 (4,8)
0.188 (4,8)
0.189 (4,8)
0.250 (6,4)
0.250 (6,4)
0.250 (6,4)
0.250 (6,4)
0.252 (6,4)
0.378 (9,6)
0.500 (12,7)
0.500 (12,7)
0.500 (12,7)
0.500 (12,7)
0.500 (12,7)
0.500 (12,7)
0.500 (12,7)
0.750 (19,1)
0.750 (19,1)
0.750 (19,1)
0.827 (21,0)
0.827 (21,0)
0.880 (22,4)
0.984 (25,0)
1.00 (25,4)
1.00 (25,4)
1.00 (25,4)
1.18 (30,0)
0.042 (1,1)
0.039 (1,0)
0.059 (1,5)
0.062 (1,6)
0.075 (1,9)
0.062 (1,6)
0.062 (1,6)
0.125 (3,2)
0.062 (1,6)
0.189 (4,8)
0.062 (1,6)
0.125 (3,2)
0.188 (4,8)
0.200 (5,1)
0.031 (0,8)
0.063 (1,6)
0.020 (0,5)
0.042 (1,1)
0.059 (1,5)
0.075 (1,9)
0.094 (2,4)
0.125 (3,2)
0.188 (4,8)
0.040 (1,0)
0.042 (1,1)
0.062 (1,6)
0.071 (1,8)
0.094 (2,4)
0.062 (1,6)
0.043 (1,1)
0.062 (1,6)
0.126 (3,2)
0.250 (6,4)
0.062 (1,6)
87
www.lairdtech.com
EMI ESSENTIALS
EXTRUSIONS GUIDE
Hollow D-Strips
TOLERANCE
0.005 (0,15)
0.008 (0,2)
0.010 (0,3)
0.015 (0,4)
0.020 (0,5)
MIL-DTL-83528
PART NUMBER
M83528/007X001
M83528/007X002
M83528/007X007
M83528/007X005
M83528/007X004
M83528/007X006
DIMENSIONS
PART NUMBER
8866-0135
8866-0160
8866-0130
8866-0162
8866-0100
8866-0111
8866-0103
8866-0136
8866-0105
8866-0131
8866-0050
8866-0110
8866-0120
8866-0116
8866-0127
8866-0168
8866-0166
8866-0134
8866-0137
8866-0169
8866-0126
8866-0125
8866-0148
8866-0139
8866-0129
8866-0155
RAD
VIEW
0.093 (2,4)
0.098 (2,5)
0.100 (2,5)
0.109 (2,8)
0.156 (4,0)
0.156 (4,0)
0.158 (4,0)
0.160 (4,1)
0.187 (4,8)
0.250 (6,4)
0.250 (6,4)
0.250 (6,4)
0.312 (7,9)
0.312 (7,9)
0.325 (8,3)
0.358 (9,1)
0.374 (9,5)
0.375 (9,5)
0.375 (9,5)
0.421 (10,7)
0.480 (12,2)
0.487 (12,4)
0.488 (12,4)
0.488 (12,4)
0.500 (12,7)
0.625 (15,9)
0.093 (2,4)
0.098 (2,5)
0.094 (2,4)
0.125 (3,2)
0.156 (4,0)
0.156 (4,0)
0.240 (6,1)
0.120 (3,0)
0.187 (4,8)
0.145 (3,7)
0.250 (6,4)
0.250 (6,4)
0.312 (7,9)
0.312 (7,9)
0.575 (14,6)
0.374 (9,5)
0.252 (6,4)
0.250 (6,4)
0.250 (6,4)
0.427 (10,8)
0.335 (8,5)
0.324 (8,2)
0.312 (7,9)
0.324 (8,2)
0.312 (7,9)
0.400 (10,2)
0.046 (1,2)
0.049 (1,2)
0.050 (1,3)
0.054 (1,4)
0.078 (2,0)
0.078 (2,0)
0.079 (2,0)
0.080 (2,0)
0.093 (2,4)
0.125 (3,2)
0.125 (3,2)
0.125 (3,2)
0.112 (2,8)
0.156 (4,0)
0.287 (7,3)
0.179 (4,5)
0.187 (4,8)
0.090 (2,3)
0.187 (4,8)
0.210 (5,3)
0.240 (6,1)
0.244 (6,2)
0.244 (6,2)
0.244 (6,2)
0.250 (6,4)
0.312 (7,9)
0.027 (0,7)
0.020 (0,5)
0.025 (0,6)
0.024 (0,6)
0.045 (1,1)
0.027 (0,7)
0.040 (1,0)
0.025 (0,6)
0.050 (1,3)
0.030 (0,8)
0.050 (1,3)
0.065 (1,7)
0.062 (1,6)
0.062 (1,6)
0.080 (2,0)
0.039 (1,0)
0.039 (1,0)
0.050 (1,3)
0.032 (0,8)
0.039 (1,0)
0.035 (0,9)
0.062 (1,6)
0.055 (1,4)
0.063 (1,6)
0.050 (1,3)
0.057 (1,4)
A
A
A
A
A
A
A
A
A
A
B
A
A
B
A
A
A
B
A
A
A
A
A
A
A
A
88
www.lairdtech.com
EMI ESSENTIALS
EXTRUSIONS GUIDE
O-Strip Tubing
TOLERANCE
0.005 (0,15)
0.008 (0,2)
0.010 (0,3)
0.015 (0,4)
0.020 (0,5)
MIL-DTL-85328
PART NUMBER
M83528/011X007
M83528/011X001
M83528/011X006
M83528/011X002
PART
NUMBER
8864-0136
8864-0060
8864-0173
8864-0156
8864-0161
8864-0090
8864-0095
8864-0142
8864-0172
8864-0153
8864-0100
8864-0101
8864-0102
8864-0104
8864-0171
8864-0105
8864-0163
8864-0139
8864-0162
NOMINAL DIMENSIONS
A
0.085 (2,2)
0.085 (2,2)
0.085 (2,2)
0.090 (2,3)
0.090 (2,3)
0.090 (2,3)
0.103 (2,6)
0.103 (2,6)
0.110 (2,8)
0.115 (2,9)
0.125 (3,2)
0.125 (3,2)
0.130 (3,3)
0.145 (3,7)
0.149 (3,8)
0.156 (4,0)
0.156 (4,0)
0.168 (4,3)
0.177 (4,5)
0.035 (0,9)
0.040 (1,0)
0.050 (1,3)
0.040 (1,0)
0.045 (1,1)
0.050 (1,3)
0.040 (1,0)
0.050 (1,3)
0.062 (1,6)
0.062 (1,6)
0.045 (1,1)
0.062 (1,6)
0.062 (1,6)
0.070 (1,8)
0.125 (3,2)
0.050 (1,3)
0.062 (1,6)
0.069 (1,8)
0.092 (2,3)
MIL-DTL-85328
PART NUMBER
M83528/011X008
M83528/011X003
M83528/011X004
M83528/011X005
PART
NUMBER
8864-0143
8864-0168
8864-0147
8864-0167
8864-0110
8864-0160
8864-0120
8864-0144
8864-0050
8864-0125
8864-0127
8864-0170
8864-0166
8864-0135
8864-0055
8864-0159
8864-0053
8864-010462
8864-3714
8864-0103
8864-0091
8864-3515
8864-2618
8864-3824
8864-0137
8864-0141
8864-0231
8864-0180
8864-3715
NOMINAL DIMENSIONS
A
0.177 (4,5)
0.188 (4,8)
0.216 (5,5)
0.228 (5,8)
0.250 (6,4)
0.312 (7,9)
0.312 (7,9)
0.330 (8,4)
0.375 (9,5)
0.375 (9,5)
0.400 (10,2)
0.422 (10,7)
0.490 (12,4)
0.513 (13,0)
0.550 (14,0)
0.623 (15,8)
0.630 (16,0)
0.079 (2,0)
0.120 (3,0)
0.125 (3,2)
0.169 (4,3)
0.125 (3,2)
0.188 (4,8)
0.192 (4,9)
0.250 (6,4)
0.235 (6,0)
0.250 (6,4)
0.200 (5,1)
0.319 (8,1)
0.414 (10,5)
0.438 (11,1)
0.447 (11,4)
0.366 (9,3)
0.375 (9,5)
0.146 (3.7)
0.146 (3.7)
0.138 (3.5)
0.094 (2.4)
0.138 (3.5)
0.102 (2.6)
0.150 (3.8)
0.094 (2.4)
0.126 (3.2)
0.071 (1.8)
0.063 (1.6)
0.146 (3.7)
0.091 (2.3)
0.055 (1.4)
0.071 (1.8)
0.059 (1.5)
0.059 (1.5)
0.071 (1.8)
0.094 (2.4)
0.035 (0.9)
0.087 (2.2)
0.039 (1)
0.039 (1)
0.059 (1.5)
89
www.lairdtech.com
EMI ESSENTIALS
EXTRUSIONS GUIDE
D-Strips
MIL-DTL-83528
PART NUMBER
MB83528/003X001
MB83528/003X005
MB83528/003X010
MB83528/003X004
MB83528/003X002
MB83528/003X008
MB83528/003X007
MB83528/003X006
MB83528/003X003
MB83528/003X011
MB83528/003X012
RECOMMENDED GROOVE
DIMENSIONS (0.002)
DIMENSIONS
PART NUMBER
8865-0100
8865-0105
8865-0120
8865-0140
8865-0116
8865-0110
8865-0135
8865-0130
8865-0125
8865-0115
8865-0144
8865-0145
RAD
WIDTH
DEPTH
0.055 (1,4)
0.062 (1,6)
0.062 (1,6)
0.075 (1,9)
0.093 (2,4)
0.094 (2,4)
0.118 (3,0)
0.122 (3,1)
0.150 (3,8)
0.178 (4,5)
0.188 (4,8)
0.250 (6,4)
0.064 (1,6)
0.068 (1,7)
0.100 (2,5)
0.178 (4,5)
0.093 (2,4)
0.078 (2,0)
0.156 (4,0)
0.135 (3,4)
0.110 (2,8)
0.089 (2,3)
0.188 (4,8)
0.250 (6,4)
0.031 (0,8)
0.031 (0,8)
0.031 (0,8)
0.089 (2,3)
0.047 (1,2)
0.047 (1,2)
0.059 (1,5)
0.061 (1,5)
0.075 (1,9)
0.039 (1,0)
0.094 (2,4)
0.125 (3,2)
0.067 (1,7)
0.074 (1,9)
0.076 (1,9)
0.093 (2,4)
0.109 (2,8)
0.109 (2,8)
0.140 (3,6)
0.141 (3,6)
0.165 (4,2)
0.182 (4,3)
0.220 (5,6)
0.286 (7,3)
0.053 (1,3)
0.057 (1,4)
0.084 (2,1)
0.150 (3,8)
0.077 (2,0)
0.065 (1,7)
0.131 (3,3)
0.113 (2,9)
0.092 (2,3)
0.074 (1,9)
0.160 (4,1)
0.212 (5,4)
Channel Strips
TOLERANCES ALL PROFILES
MIL-DTL-83528
PART NUMBER
M83528/010X001
M83528/010X002
M83528/010X003
M83528/010X004
M83528/010X005
M83528/010X006
TOLERANCE
0.005 (0,15)
0.008 (0,2)
0.010 (0,3)
0.015 (0,4)
0.020 (0,5)
DIMENSIONS
PART NUMBER
8868-0100
8868-0055
8868-0105
8868-0056
8868-0115
8868-0067
8868-0120
8868-0081
8868-0084
8868-0085
8868-0125
8868-0070
8868-0075
DIMENSIONS
0.100 (2,5)
0.114 (2,9)
0.126 (3,2)
0.156 (4,0)
0.156 (4,0)
0.175 (4,4)
0.175 (4,4)
0.189 (4,8)
0.250 (6,4)
0.252 (6,4)
0.327 (8,3)
0.395 (1,0)
0.530 (13,5)
0.100 (2,5)
0.082 (2,1)
0.110 (2,8)
0.114 (2,9)
0.156 (4,0)
0.500 (12,7)
0.156 (4,0)
0.189 (4,8)
0.250 (6,4)
0.252 (6,4)
0.235 (6,0)
0.120 (3,0)
0.130 (3,3)
0.034 (0,9)
0.030 (0,8)
0.025 (0,6)
0.030 (0,8)
0.062 (1,6)
0.047 (1,2)
0.047 (1,2)
0.063 (1,6)
0.062 (1,6)
0.126 (3,2)
0.062 (1,6)
0.275 (7,0)
0.390 (9,9)
0.033 (0,8)
0.026 (0,7)
0.050 (1,3)
0.062 (1,6)
0.047 (1,2)
0.075 (1,9)
0.075 (1,9)
0.063 (1,6)
0.062 (1,6)
0.063 (1,6)
0.115 (2,9)
0.060 (1,5)
0.060 (1,5)
90
www.lairdtech.com
EMI ESSENTIALS
EXTRUSIONS GUIDE
O-Strips
M83528/001X001
M83528/001X002
M83528/001X003
M83528/001X004
M83528/001X005
M83528/001X006
M83528/001X007
M83528/001X008
M83528/001X009
M83528/001X010
M83528/001X011
M83528/001X0012
M83528/001X013
PART NUMBER
8863-0184
8863-0100
8863-0105
8863-0110
8863-0115
8863-0120
8863-0125
8863-0196
8863-0130
8863-0135
8863-0140
8863-0145
8863-0150
8863-0160
8863-0165
8863-0170
8863-0197
8863-0183
8863-0198
8863-0199
8863-0175
8863-0180
8863-0200
8863-0201
8863-0202
WIDTH
HEIGHT
0.032 (0,8)
0.040 (1,0)
0.053 (1,3)
0.062 (1,6)
0.070 (1,8)
0.080 (2,0)
0.093 (2,4)
0.098 (2,5)
0.103 (2,6)
0.112 (2,8)
0.119 (3,0)
0.125 (3,2)
0.130 (3,3)
0.139 (3,5)
0.150 (3,8)
0.160 (4,1)
0.186 (4,7)
0.188 (4,8)
0.194 (4,9)
0.197 (5,0)
0.216 (5,5)
0.250 (6,4)
0.256 (6,5)
0.312 (7,9)
0.374 (9,5)
0.036 (0,9)
0.045 (1,1)
0.059 (1,5)
0.066 (1,7)
0.076 (1,9)
0.086 (2,2)
0.100 (2,5)
0.105 (2,7)
0.110 (2,8)
0.119 (3,0)
0.126 (3,2)
0.133 (3,4)
0.137 (3,5)
0.147 (3,7)
0.158 (4,0)
0.168 (4,3)
0.197 (5,0)
0.200 (5,1)
0.209 (5,3)
0.210 (5,3)
0.229 (5,8)
0.267 (6,8)
0.274 (7,0)
0.337 (8,6)
0.400 (10,2)
0.026 (0,7)
0.032 (0,8)
0.042 (1,1)
0.050 (1,3)
0.056 (1,4)
0.064 (1,6)
0.074 (1,9)
0.078 (2,0)
0.082 (2,1)
0.089 (2,3)
0.095 (2,4)
0.100 (2,5)
0.104 (2,6)
0.111 (2,8)
0.120 (3,0)
0.128 (3,3)
0.149 (3,8)
0.150 (3,8)
0.156 (4,0)
0.158 (4,0)
0.173 (4,4)
0.200 (5,1)
0.205 (5,2)
0.250 (6,4)
0.300 (7,6)
91
www.lairdtech.com
EMI ESSENTIALS
EXTRUSIONS GUIDE
P-Strips
TOLERANCE
0.005 (0,15)
0.008 (0,2)
0.010 (0,3)
0.015 (0,4)
0.020 (0,5)
MIL-DTL-83528
PART NUMBER
M83528/008X007
M83528/008X002
M83528/008X004
M83528/008X006
M83528/008X001
M83528/008X005
PART NUMBER
8867-0136
8867-0147
8867-0144
8867-0128
8867-0141
8867-0101
8867-0127
8867-0105
8867-0126
8867-0102
8867-0158
8867-0165
8867-0130
8867-0100
8867-0166
8867-0125
DIMENSIONS
A
0.275 (7,0)
0.290 (7,4)
0.390 (9,9)
0.415 (10,5)
0.425 (10,8)
0.475 (12,1)
0.500 (12,7)
0.500 (12,7)
0.600 (15,2)
0.640 (16,3)
0.752 (19,1)
0.752 (19,1)
0.780 (19,8)
0.850 (21,6)
0.874 (22,2)
0.875 (22,2)
0.140 (3,6)
0.095 (2,4)
0.200 (5,1)
0.200 (5,1)
0.250 (6,4)
0.200 (5,1)
0.200 (5,1)
0.250 (6,4)
0.250 (6,4)
0.208 (5,3)
0.252 (6,4)
0.437 (11,1)
0.360 (9,1)
0.200 (5,1)
0.500 (12,7)
0.312 (7,9)
0.085 (2,2)
0.062 (1,6)
0.103 (2,6)
0.060 (1,5)
0.151 (3,8)
0.080 (2,0)
0.076 (1,9)
0.125 (3,2)
0.125 (3,2)
0.080 (2,0)
0.189 (4,8)
0.347 (8,8)
0.255 (6,5)
0.080 (2,0)
0.400 (10,2)
0.187 (4,8)
0.030 (0,8)
0.025 (0,6)
0.062 (1,6)
0.062 (1,6)
0.050 (1,3)
0.062 (1,6)
0.062 (1,6)
0.062 (1,6)
0.062 (1,6)
0.072 (1,8)
0.063 (1,6)
0.060 (1,5)
0.070 (1,8)
0.062 (1,6)
0.065 (1,7)
0.062 (1,6)
92
www.lairdtech.com
EMI ESSENTIALS
GEMINI COEXTRUSIONS
MULTI-EXTRUSION, BI-FUNCTIONAL
ELASTOMER GASKET
FEATURES
MARKETS
Wireless infrastructure
Remote radio units
Telecom cabinets
Radar
IT cabinets
All electronic cabinets or electronic chassis that require
both an environmental seal and EMI shielding
NAME OF MATERIAL
NONCONDUCTIVE ELASTOMER
TEST METHOD
CONDUCTIVE ELASTOMER
NCE220
NCE221
ECE93
ECE81A
Silicone rubber
Silicone rubber
NA
Alumina/Ni/C
Ag/Al
Compound
ASTM D792
HB
Blue
70 Shore A
1.2
V1(Pending)
Orange
60 Shore A
1.5
Silicone rubber
Ag/Al
Compound
Not tested
Tan
65 Shore A
1.9
Silicone rubber
Alumina
Silicone rubber
Nickel/graphite
(Ni/C)
HB
Black
55 Shore A
1.9
NCE221/
ECE81A, CO-ECE
Silicone rubber
Tensile strength
ASTM D412
(modified)
2.8 MPa
3.4 MPa
1.0 MPa
1.7 MPa
NA
NA
Tear strength
GB/T529-91
(modified)
60 ppi, min
30 ppi, min
30 ppi, min
NA
NA
Elongation to break
Working
temperature range
ASTM D412
100 to 400%
300% ,min
100 to 300%
100 to 300%
100 to 300%
300% ,min
ASTMJ D1329
-50 to 150C
-50 to 150C
-50 to 150C
-50 to 150C
-50 to 150C
-50 to 150C
EU directive
94/62/EC, Dec
20, 1994
RoHS Compliant
RoHS Compliant
RoHS Compliant
RoHS Compliant
RoHS Compliant
RoHS Compliant
Volume resistivity
(max value)
MIL-DTL-83528C
(PARA 4.5.10)
Insulator
Insulator
0.100 ohm-cm
0.006 ohm-cm
NA
NA
Insulator
Insulator
<0.2 ohm-cm
<0.015 ohm-cm
NA
NA
Not Tested
Not Tested
NA
Not Tested
NA
NA
NA
NA
NA
NA
NA
NA
100 dB
100 dB
100 dB
100 dB
100 dB
100 dB
100 dB
100 dB
90 dB
90 dB
80 dB
80 dB
100 dB
100 dB
95 dB
90 dB
Polymer matrix
Filler
Flammability UL94
Color
Hardness
Specific gravity
Environmental
file E203070
visual
ASTM D2240
ASTM G21
Mold growth
Shielding effectiveness (dB)*
100 MHz (E-field)
MIL-DTL-83528C
500 MHz (E-field)
(PARA 4.5.12)
2 GHz (Plane Wave)
MIL-STD 285
10 GHz (Plane Wave)
NCE220/ECE93,
CO-ECE
HB
Black & Blue
NA
NA
V1(Pending)
Tan & Orange
NA
NA
93
www.lairdtech.com
EMI ESSENTIALS
GEMINI COEXTRUSIONS
M
8890-MGS103072-93
8890 0001 XX A
8890 0002 XX A
8894 0001 XX A
DD
8898 0001 XX A
8898 0002 XX A
94
www.lairdtech.com
8899 0001 XX A
8898 0003 XX A
EMI ESSENTIALS
TOLERANCES
TOLERANCES
0.010 (0,3)
0.015 (0,4)
0.020 (0,5)
0.025 (0,6)
0.35% nom. dim.
0.003 (0,1)
0.005 (0.1)
0.006 (0,2)
M83528/002X007
M83528/005X006
M83528/002X011
M83528/002X012
M83528/002X013
M83528/005X008
M83528/002X014
M83528/002X015
M83528/005X016
M83528/002X114
M83528/002X017
M83528/002X018
LAIRD PART NO
8563-0322-XX
8563-0068-XX
8563-0143-XX
8563-0334-XX
8563-0326-XX
8563-0343-XX
8563-0106-XX
8563-0069-XX
8563-0070-XX
8563-0243-XX
8563-0071-XX
8563-0108-XX
8563-0072-XX
8563-0196-XX
8563-0327-XX
8563-0073-XX
8563-0116-XX
8563-0091-XX
8563-0285-XX
8563-0074-XX
8563-0211-XX
8563-0075-XX
DIMENSIONS
C
0.050 (1,3)
0.145 (3,7)
0.150 (3,8)
0.176 (4,5)
0.260 (6,6)
0.270 (6,9)
0.295 (7,5)
0.301 (7,6)
0.364 (9,2)
0.415 (10,5)
0.426 (10,8)
0.446 (11,3)
0.489 (12,4)
0.492 (12,5)
0.500 (12,7)
0.551 (14,0)
0.610 (15,5)
0.612 (15,5)
0.632 (16,1)
0.676 (17,2)
0.676 (17,2)
0.739 (18,8)
0.063 (1,6)
0.070 (1,8)
0.062 (1,6)
0.070 (1,8)
0.030 (0,8)
0.070 (1,8)
0.048 (1,2)
0.070 (1,8)
0.070 (1,8)
0.057 (1,4)
0.070 (1,8)
0.051 (1,3)
0.070 (1,8)
0.070 (1,8)
0.100 (2,5)
0.070 (1,8)
0.070 (1,8)
0.103 (2,6)
0.062 (1,6)
0.070 (1,8)
0.070 (1,8)
0.070 (1,8)
MIL-DTL-83528
PART NO.
M83528/002X019
M83528/002X020
M83528/002X021
M83528/002X022
M83528/002X024
M83528/005X013
M83528/002X026
M83528/002X126
M83528/002X028
M83528/002X128
M83528/005X022
M83528/002X132
LAIRD PART NO
8563-0218-XX
8563-0076-XX
8563-0077-XX
8563-0344-XX
8563-0078-XX
8563-0079-XX
8563-0213-XX
8563-0279-XX
8563-0062-XX
8563-0080-XX
8563-0113-XX
8563-0089-XX
8563-0161-XX
8563-0094-XX
8563-0090-XX
8563-0165-XX
8563-0324-XX
8563-0095-XX
8563-0164-XX
8563-0166-XX
8563-0122-XX
8563-0096-XX
DIMENSIONS
C
0.755 (19,2)
0.801 (20,3)
0.864 (21,9)
0.921 (23,4)
0.926 (23,5)
0.989 (25,1)
0.989 (25,1)
1.000 (25,4)
1.100 (27,9)
1.114 (28,3)
1.182 (30,0)
1.239 (31,5)
1.239 (31,5)
1.362 (34,6)
1.364 (34,6)
1.366 (34,7)
1.463 (37,2)
1.487 (37,8)
1.487 (37,8)
1.489 (37,8)
1.612 (40,9)
1.737 (44,1)
0.097 (2,5)
0.070 (1,8)
0.070 (1,8)
0.139 (3,5)
0.070 (1,8)
0.070 (1,8)
0.070 (1,8)
0.250 (6,4)
0.070 (1,8)
0.070 (1,8)
0.068 (1,7)
0.070 (1,8)
0.070 (1,8)
0.103 (2,6)
0.070 (1,8)
0.070 (1,8)
0.080 (2,0)
0.103 (2,6)
0.103 (2,6)
0.070 (1,8)
0.103 (2,6)
0.103 (2,6)
95
www.lairdtech.com
EMI ESSENTIALS
TOLERANCE
0.005 (0,1)
0.010 (0,3)
0.015 (0,4)
0.020 (0,5)
M83528/012X001
M83528/012X002
M83528/012X004
M83528/012X003
M83528/012X005
M83528/012X007
M83528/012X006
M83528/012X008
8560-0231-XX
8560-0234-XX
8560-0233-XX
8560-0097-XX
8560-0158-XX
8560-0435-XX
8560-0299-XX
8560-0143-XX
8560-0098-XX
8560-0331-XX
8560-0444-XX
8560-0200-XX
8560-0099-XX
8560-0100-XX
8560-0144-XX
8560-0145-XX
8560-0330-XX
8560-0311-XX
8560-0505-XX
8560-0453-XX
96
www.lairdtech.com
DIMENSIONS
A
0.120 (3,0)
0.171 (4,3)
0.218 (5,5)
0.250 (6,4)
0.250 (6,4)
0.250 (6,4)
0.319 (8,1)
0.375 (9,5)
0.375 (9,5)
0.375 (9,5)
0.380 (9,7)
0.433 (11,0)
0.500 (12,7)
0.500 (12,7)
0.500 (12,7)
0.500 (12,7)
0.500 (12,7)
0.641 (16,3)
0.800 (20,3)
0.890 (22,6)
0.260 (6,6)
0.390 (9,9)
0.468 (11,9)
0.625 (15,9)
0.562 (14,3)
0.750 (19,1)
0.422 (10,7)
0.750 (19,1)
0.750 (19,1)
0.750 (19,1)
0.960 (24,4)
0.508 (12,9)
0.656 (16,7)
0.875 (22,2)
0.656 (16,7)
0.875 (22,2)
0.656 (16,7)
0.703 (17,9)
1.000 (25,4)
1.250 (31,8)
0.030 (0,8)
0.060 (1,5)
0.030 (0,8)
0.032 (0,8)
0.060 (1,5)
0.032 (0,8)
0.075 (1,9)
0.062 (1,6)
0.031 (0,8)
0.032 (0,8)
0.065 (1,7)
0.045 (1,1)
0.031 (0,8)
0.031 (0,8)
0.062 (1,6)
0.062 (1,6)
0.032 (0,8)
0.032 (0,8)
0.156 (4,0)
0.062 (1,6)
EMI ESSENTIALS
TOLERANCE
0.005 (0,1)
0.008 (0,2)
0.010 (0,3)
0.015 (0,4)
0.020 (0,5)
M83528/013X002
M83528/013X004
M83528/013X006
M83528/013X008
M83528/013X011
M83528/013X012
M83528/013X017
NOMINAL DIMENSIONS
8563-0126-XX
8563-0127-XX
8563-0128-XX
8563-0129-XX
8563-0131-XX
8563-0130-XX
8563-0133-XX
0.056 (1,4)
0.048 (1,2)
0.125 (3,2)
0.065 (1,7)
0.088 (2,2)
0.077 (2,0)
0.078 (2,0)
0.041 (1,0)
Full Radius
Full Radius
0.049 (1,2)
Full Radius
Full Radius
Full Radius
0.410 (10,4)
0.587 (14,9)
0.885 (22,5)
1.122 (28,5)
1.340 (34,0)
1.310 (33,3)
1.550 (39,4)
0.082 (2,1)
0.078 (2,0)
0.155 (3,9)
0.099 (2,5)
0.095 (2,4)
0.115 (2,9)
0.105 (2,7)
M83528/006X001
M83528/006X002
M83528/006X003
M83528/006X005
WIDTH DIMENSIONS
LAIRD PART NO
8563-0253-XX
8563-0254-XX
8563-0255-XX
8563-0257-XX
LENGTH DIMENSIONS
MIN
MAX
MIN
MAX
0.285 (7,2)
0.485 (12,3)
0.619 (15,7)
1.325 (33,7)
0.295 (7,5)
0.495 (12,6)
0.629 (16,0)
1.355 (34,4)
0.983 (25,0)
0.983 (25,0)
1.243 (31,6)
5.265 (133,7)
0.993 (25,2)
0.993 (25,2)
1.243 (31,6)
5.295 (134,5)
M83528/013X013
8563-0248-XX
M83528/013X018
8563-0249-XX
M83528/013X023
8563-0250-XX
M83528/013X030
8563-0251-XX
M83528/013X037
DIMENSIONS
A
1.368 (34,7)
0.012 (0,3)
1.616 (41,0)
0.015 (0,4)
11.866 (301,4)
0.015 (0,4)
2.449 (62,2)
0.020 (0,5)
3.451 (87,7)
0.024 (0,6)
0.868 (22,0)
0.010 (0,3)
0.991 (25,2)
0.010 (0,3)
1.116 (28,3)
0.012 (0,3)
1.449 (36,8)
0.013 (0,3)
1.951 (49,6)
0.004 (0,1)
0.103 (2.6)
0.003 (0,1)
0.103 (2,6)
0.003 (0,1)
0.103 (2,6)
0.003 (0,1)
0.139 (3,5)
0.004 (0,1)
0.139 (3,5)
0.004 (0,1)
97
www.lairdtech.com
EMI ESSENTIALS
TABLE 7.
MIL-DTL-83528
PART NO.
M83528/013X001
M83528/013X003
M83528/013X005
M83528/013X007
M83528/013X009
M83528/013X015
M83528/013X016
M83528/013X020
M83528/013X027
DIMENSIONS
8560-0104-XX
Fig. 1
8560-0105-XX
Fig. 1
8560-0106-XX
Fig. 1
8560-0103-XX
Fig. 1
8560-0107-XX
Fig. 1
8560-0108-XX
Fig. 1
8560-0113-XX
Fig. 2
8560-0114-XX
Fig. 2
8560-0116-XX
Fig. 2
M83528/013X028
Fig. 2
M83528/013X031
Fig. 2
M83528/013X040
8560-0110-XX
Fig. 2
F RADIUS
0.750
(19,1)
0.875
(22,2)
1.313
(33,4)
1.496
(38,0)
1.625
(41,3)
1.875
(47,6)
1.750
(44,5)
1.937
(49,2)
3.500
(88,9)
1.764
(44,8)
2.750
(69,9)
4.188
(106,4)
0.750
(19,1)
0.875
(22,2)
1.313
(33,4)
1.496
(38,0)
1.625
(41,3)
1.875
(47,6)
2.500
(63,5)
2.687
(68,3)
2.500
(63,5)
2.781
(70,6)
3.875
(98,4)
6.344
(161,1)
0.145
(3,7)
0.175
(4,4)
0.630
(16,0)
0.760
(19,3)
0.905
(23,0)
1.130
(28,7)
0.505
(12,8)
0.633
(16,1)
1.880
(47,8)
0.882
(22,4)
1.155
(29,3)
2.160
(54,9)
0.285
(7,2)
0.425
(10,8)
0.320
(8,1)
0.385
(9,8)
0.405
(10,3)
0.505
(12,8)
1.130
(28,7)
1.380
(35,1)
0.880
(22,4)
1.882
(47,8)
2.300
(58,4)
4.310
(109,5)
0.116
(2,9)
0.116
(2,9)
0.140
(3,6)
0.155
(3,9)
0.169
(4,3)
0.180
(4,6)
0.171
(4,3)
0.206
(5,2)
0.226
(5,7)
0.156 (4,0)
0.141
0.270
(6,9)
0.266 (6,8)
0.281 (7,1)
0.027
(0,7)
0.027
(0,7)
0.027
(0,7)
0.027
(0,7)
0.027
(0,7)
0.027
(0,7)
0.027
(0,7)
0.027
(0,7)
0.027
(0,7)
0.027
(0,7)
0.027
(0,7)
0.027
(0,7)
0.469
(11,9)
0.563
(14,3)
0.875
(22,2)
0.450
(11,4)
0.469
(11,9)
1.150
(29,2)
0.250
(6,4)
0.250
(6,4)
0.313
(8,0)
0.125
(3,2)
0.312
(7,9)
0.250
(6,4)
Note: Compound 98 is silicone material filled with Ag/Cu and expanded metal. See Material Compounds chart on
98
www.lairdtech.com
EMI ESSENTIALS
TABLE 1.
MATERIAL
CODE
ELASTOMER
WIRE SPECIFICATION
55
Silicone Sponge
Per AMS 3195
56
58
Silicone Sponge
Per AMS 3195
59
Note: Wire density per sq. in.: 700900; per sq. cm 108139
55 not available in thickness below .062
PART NO.
8408-0200-XX
8408-0203-XX
8408-0206-XX
8408-0209-XX
8408-0212-XX
8408-0213-XX
8408-0215-XX
8408-0218-XX
8408-0221-XX
8408-0227-XX
8408-0230-XX
8408-0242-XX
8408-0245-XX
8408-0248-XX
8408-0251-XX
8408-0254-XX
8408-0257-XX
DIMENSIONS
A. WIDTH
B. THICKNESS
3.000 (76,2)
3.000 (76,2)
3.000 (76,2)
3.000 (76,2)
3.000 (76,2)
3.000 (76,2)
4.500 (114,3)
4.500 (114,3)
4.500 (114,3)
4.500 (114,3)
6.000 (152,4)
6.000 (152,4)
9.000 (228,6)
9.000 (228,6)
9.000 (228,6)
9.000 (228,6)
9.000 (228,6)
0.032 (0,8)
0.045 (1,1)
0.062 (1,6)
0.093 (2,4)
0.125 (3,2)
0.187 (4,8)
0.032 (0,8)
0.045 (1,1)
0.062 (1,6)
0.125 (3,2)
0.032 (0,8)
0.125 (3,2)
0.032 (0,8)
0.045 (1,1)
0.062 (1,6)
0.093 (2,4)
0.125 (3,2)
HOW TO SPECIFY
1. For PSA, change the fifth digit to 9 for items with tape.
Example: 8408-0200-59 becomes 8408-9200-59.
2. Replace XX with material code from Table 1.
Example: To request a 3.0 in. (76,2 mm) wide x 0.032 in.
(0,8 mm) thick strip with aluminum wire in solid silicone
sponge, use 8408-0200-59.
For further information or for product samples, please contact
Laird sales department.
99
www.lairdtech.com
EMI ESSENTIALS
ELECTROMET IMPREGNATED
WOVEN WIRE AND EXPANDED METAL
ElectroMet impregnated wire mesh and expanded metal gaskets
are available in thin sheet form. EMI shielding is provided by
woven aluminum mesh or expanded metals. Pressure sealing is
provided by neoprene or silicone elastomer impregnated in the
mesh. Fluorosilicone is also available for specific applications that
require resistance to oils, hydraulic fluids and hydrocarbon fuels.
WIDTH
MATERIAL
DESCRIPTION
8416-0120-57
0.020 0.004
(0,5 0,1)
8.0 (203,2)
8416-0120-23
0.020 0.004
(0,5 0,1)
8416-0320-21
0.020 0.004
(0,5 0,1)
8416-0330-21
0.030 0.004
(0,8 0,1)
8416-0320-22
0.020 0.004
(0,5 0,1)
PART NO.
8416-0330-22
0.030 0.004
(0,8 0,1)
MATERIAL SPECIFICATIONS
METAL FILLER
ELASTOMER FILLER
COLOR
Woven Wire
Neoprene
Impregnated
Aluminum 5056
Alloy Per AMS 3222
Neoprene
Per AMS 4182
Black
8.0 (203,2)
Aluminum 5056
Alloy Per AMS 4182
Gray
8.0 (203,2)
Expanded Metal
with Elastomer
Aluminum 5056
Alloy Per AMS 4182
Gray
8.0 (203,2)
Expanded Metal
with Elastomer
Monel per
QQ-N-281B
Gray
100
www.lairdtech.com
EMI ESSENTIALS
MATERIAL SPECIFICATIONS
SEAL
FLUIDS
DRIP
JP4
SALT FOG
PROOF HYDRAUL
OUTER
SPACE
TEMP
-40F
+250F
TEMP
-65F
+500F
SURFACE
FLATNESS
<0.010
SURFACE
FLATNESS
>0.010
MATERIAL
CODE
MATERIAL
DESCRIPTION
METAL FILLER
ELASTOMER
FILLER
COLOR
THICKNESS
SHIELDING
EFFECTIVENESS
57
Woven Wire
Neoprene
Impregnated
Aluminum
Alloy 5056
Per AMS
4182
Neoprene
Per AMS
3222
Black
0.020
0.004
(0,5 0,1)
23
Woven Wire
Silicone
Impregnated
Aluminum
Alloy 5056
Per AMS
4182
Gray
0.020
0.004
(0,5 0,1)
56
Oriented
Wire in Solid
Silicone
Monel
Alloy Per
QQN 281
Gray
0.062
0.005
(0,8 0,1)
Silicone
Per ZZR
765, Glass
2B, Grade
50
Silicone
Per ZZR
765,
Class 2B,
Grade 50
HOW TO SPECIFY
1. From Table below, match base part number to shell size used.
2. From Table 1, determine material code based on characteristics which best meet design requirements.
3. Insert material code in place of the XX from base part number.
Example: Base part number for shell size F in Table below is 8516-0210-XX; material code chosen from Table 1 is -57: part number is 8516-0210-57.
THICKNESS
# PINS
TOLERANCE:
8516-0208-XX
8516-0201-XX
8516-0209-XX
8516-0203-XX
8516-0210-XX
8516-0211-XX
8516-0204-XX
8516-0212-XX
8516-0205-XX
0.030 (0,8)
0.060 (1,5)
0.030 (0,8)
0.060 (1,5)
0.030 (0,8)
0.030 (0,8)
0.060 (1,5)
0.030 (0,8)
0.060 (1,5)
9
15
25
37
50
0.015 (0,4)
0.010 (0,2)
0.015 (0,4)
REF
0.010 (0,3)
0.015 (0,4)
0.010 (0,3)
1.410
(35,8)
1.740
(44,2)
2.280
2,930
(74,4)
2.840
(72,1)
0.980
(24,9)
1.310
(33,3)
1.850
2.500
(63,5)
2.410
(61,2)
0.780
(19,8)
1.110
(28,2)
1.650
2.290
(58,2)
2.110
(53,6)
0.220
(5,6)
0.220
(5,6)
0.220
0.220
(5,6)
0.280
(7,1)
0.440
(11,2)
0.440
(11,2)
0.440
0.440
(11,2)
0.550
(14,0)
0.690
(17,5)
0.690
(17,5)
0.690
0.690
(17,5)
0.800
(20,3)
0.130
(3,3)
0.130
(3,3)
0.130
0.130
(3,3)
0.240
(6,1)
To order replace XX with material code from the Material Compounds chart on page 101.
www.lairdtech.com
101
EMI ESSENTIALS
SPECIALTY PRODUCTS
ELECTROCOAT
ElectroCoat is a thin, flexible surface coating consisting of a
silver-filled silicone elastomer. The versatile coating can be easily
applied to die-cut or molded foams for both gasket and nongasket applications. It can also be applied to molded or extruded
elastomers, other polymers, and a wide range of other materials.
Excellent shielding effectiveness greater than 90 dB
measured by transfer impedance
Solid, continuous, conductive coating over the entire gasket
surface, including the inner die-cut surfaces of foam gaskets
Coated foam gaskets have very low compression force
Exceptionally wide compression range from 10% to 70%
deflection to accommodate uneven gaps in enclosure
housings
Flexible coating withstands gasket compression with no
decrease in shielding effectiveness after 1000 cycles of 40%
compression
Extruded profiles shown on pages 87-92 are available with
neoprene core.
ORDERING INFORMATION
1. Determine if PSA is needed. If so, replace the 5th digit in the
part number with 9.
2. Select desired core material from Table 1 and insert in place
of YY.
3. Select two digit ElectroCoat from Table 2 and insert in place
of ZZ.
4. A unique custom identification number will be assigned by
sales.
8550
-X
XXX
-YY
-ZZ
Standard
Series
Number
9
w/PSA
Unique identification
number assigned
by Laird
Core
Material*
ElectroCoat
(Coating
Material)
TABLE 1
YY #
CORE MATERIAL*
50
Silicone Foam
51
Solid Silicone
52
Neoprene Foam
ZZ COATING #
MATERIAL
10
Silver/Silicone
TABLE 2
102
www.lairdtech.com
EMI ESSENTIALS
AUTOMATED FORM-IN-PLACE
EMI GASKET TECHNOLOGIES
INTRODUCTION
Laird form-in-place is an automated system for dispensing
conductive elastomer EMI shielding and grounding gaskets onto
metal or plastic substrates. Form-in-place is particularly well
suited for cellular phones, PDAs, PC cards, telecom base stations,
radios, and many other compartmentalized cast or plastic
enclosures and packaged electronic assemblies.
Utilizing programmable 3-axis CNC dispensing equipment,
the compound is dispensed accurately onto the substrate and
creates a secure bond during the curing process. The repeatable
computer-controlled dispensing pattern insures consistency
between parts and rapid part program changes. In addition, it
supports all levels of volume from prototyping to high-volume
electronic component production via the use of one or multiple
dispensing heads. The system is programmed to apply custom
gasket configurations onto parts, to form multiple levels on the
part, and on slopes up to approximately 70.
Laird RXP compounds are Room Temperature Vulcanizing
(RTV) elastomers and HXP compounds are High Temperature
Vulcanizing (HTV) elastomers, both filled with proprietary
conductive particles. Dispensed gasket beads of RXP compounds
may be handled in 3 hours, and are cured in 24 hours, under
conditions of standard temperature and 50% Relative Humidity.
Dispensed gasket beads of HXP compounds can be handled
after the materials are cured in an oven. The compounds have
a working compression range from 10% to 50% of the gasket
height, with a recommended design compression of 30% against
a mechanical compression stop. Our product is designed to
support low closure forces and is compatible with plastic, metal,
and plated or chromate finished substrates.
The required force to compress a given bead is a function of the
compound and the gasket size; i.e. smaller gaskets require less
force than larger gaskets. Please refer to our technical data for
details. Gaskets are dispensed on substrates within a placement
tolerance of 0.001 inches and gasket cross-sectional tolerances
from 0.003 to 0.007 inches. Refer to Table 1 on page 104 for
typical gasket dimensions and tolerances. As a normal course of
equipment operations, starting points and termination ends of the
gaskets will have profiles that are approximately 25% larger than
the running gaskets.
FORM-IN-PLACE GASKETING
FEATURES AND BENEFITS
Form-in-place gasketing offers a total cost savings in the
form of reduced raw materials, labor or assembly time
Room temperature cure gasketing materials eliminate the
need for costly heat curing systems, allowing the use of
inexpensive plastic or metal substrates
Single-component compounds eliminate the need for mixing
ingredients, thereby shortening production cycles and
eliminating related waste
Easy to program operating system allows for quick part-topart change-over, minimal tooling investment for new designs,
and prototype development in 24 to 48 hours
High shielding effectiveness: 85100 dB up to 10 GHz
The dispensing system supports prototyping and high volume
production schedules in a space saving 4 x 3 [12 sq. ft.] (1,2
m x 0,9 m [1,1 sq. m]) footprint
Form-in-place gaskets provide more critical packaging space
for board level components and smaller package dimensions
Excellent adhesion on a wide variety of metal and plastic
substrates including:
- aluminum and other casting alloys
- stainless steel
- nickel copper plating (on plastics)
- copper, silver, and nickel filled paint (on plastics)
Low compression force makes SN compounds an
excellent selection where the mating surfaces lack
mechanical stiffness
ON A SIDE
ON A RIDGE
IN A GROOVE
www.lairdtech.com
ON A FLAT
SURFACE
103
EMI ESSENTIALS
AUTOMATED FORM-IN-PLACE
EMI GASKET TECHNOLOGIES
TABLE 1.
TYPICAL BEAD DIMENSIONS
TABLE 2.
ACCELERATED CURE AT HIGHER TEMPERATURES
HEIGHT
WIDTH
MINIMUM
LANDING AREA
0.020 (0,5)
Temperature F (C)
0.025 (0,6)
0.029 (0,7)
0.036 (0,9)
0.040 (1,0)
0.055 (1,4)
0.067 (1,7)
0.084 (2,1)
50%RELATIVE HUMIDITY,
0.024 IN. (0,6 MM) BEAD
CONDITIONS
73 (23)
140 (60)
185 (85)
12
SNK55-RXP
SNL60-RXP
SNN60-RXP
SIL25-RXP
SNC70-HXP
SNK60-HXP
SNL70-HXP
SNN65-HXP
SIL35-HXP
Elastomer
Silicone
Silicone
Silicone
Silicone
Silicone
Silicone
Silicone
Silicone
Silicone
Silicone
Filler
Nickel/
Graphite
Silver/
Nickel
Nonconductive
Nickel/
Graphite
Silver/
Copper
Silver/
Aluminium
Silver/
Nickel
NonConductive
Color
Gray
Tan
Tan
Tan
White
Gray
Tan
Tan
Tan
Transparent
ohmcm
0.03
0.002
0.003
0.005
NA
0.03
0.004
0.005
0.005
NA
TEST METHOD
UNIT
Silver/
Silver/Copper
Aluminium
Electric Properties
Volume Resistivity
Shielding effectiveness
MIL-DTL83528C
Para. 4.5.12
dB
>100
>90
>100
>100
NA
>90
>90
>90
>100
NA
Hardness
ASTM D2240
Shore
A
70
55
60
60
25
70
60
70
65
35
Density (cured)
ASTM D792
g/cm3
2.5
2.1
3.9
1.2
2.5
3.1
3.84
1.1
Mechanical Properties
Compression set
ASTM D395
15
10
10
15
<20(a)
15
10
10
10(b)
<20(b)
LT-FIP-CLE-03
N/cm2
150
200
140
180
220
>180
200
200
200
285
Compression deflection
LT-FIP-CLE-07
at 20% compression
lb/in
1.5
1.2
1.9
1.7
at 40% compression
lb/in
6.9
5.2
8.3
6.4
-50 to 125
-50 to 100
-50 to 125
-50 to 125
V0
V0
V0
V0
15C to
40C, 50%
relative
humidity
15C to
40C, 50%
relative
humidity
15C to
40C, 50%
relative
humidity
1 hour
1 hour
24 hours
24 hours
Temperature Range
UL rating
UL-94
3.2
1.5
2.3
11.5
7.3
10.5
-50 to 125
-50 to 125
-50 to 125
-50 to 125
TBD
V0
V0
V0
V0
TBD
15C to
40C, 50%
relative
humidity
23C, 50%
RH
120C
120C
120C
120C
120C
1 hour
1 hour
10-25
minutes
24 hours
24 hours
12 hrs/mm
thick
1 hour
1.5 hours
1 hours
1.5 hours
1 hour
Curing requirements
Curing conditions
Handling time
Cure time
104
www.lairdtech.com
EMI ESSENTIALS
MICROWAVE ABSORBERS
PRODUCT SELECTION GUIDE
Frequency Range
Description
Thickness
Application
>10 GHz
Q Zorb - 2000
>8 GHz
Q Zorb - 2000
>4 GHz
Q Zorb - 2000
<4 GHz
Q Zorb - 2000
<2 GHz
Q Zorb - 3000
<2 GHz
Q Zorb - 3000
RF Foam - 4000
RF Foam - 5000
RF Foam - 5000
105
www.lairdtech.com
EMI ESSENTIALS
MAGNETIC ABSORBERS
ABSORBER APPLICATIONS
Electronic operating at high frequencies can have problems with
emission of high frequency noise. Once put inside an enclosure,
the energy will add in phase at certain frequencies to cause
resonances which will hinder the performance of the device.
A good example of this phenomenon is seen in Figure 1.
The amplifier was measured in the condition shown and
subsequently remeasured inside of its enclosure. When put inside
the enclosure the performance was severely degraded due to
cavity resonances inside of the enclosure. The measured data is
shown below in Figure 2.
FOAM ABSORBERS
These absorbers are based upon open celled foam impregnated
with a carbon coating. The carbon coating makes the resultant
product lossy at microwave frequencies, indeed acting like a
free space resistor to incoming electromagnetic energy. These
foam products range from 3.2 mm to 6.4 mm for internal cavity
applications and can be several centimeters thick for outdoor
applications. Two main product types are offered by Laird
RFLS- Lossy sheets are uniformly loaded with the carbon
coating and used at 3.2 mm and 6.4 mm thick. They are
supplied as sheet materials and may have PSA applied and
fire retardant coatings.
RFRET- is a reticulated foam based absorber. The materials are
thicker ranging from 3/8 to 2 in thickness. They can be used
for air filtration and EMI, or on the inside of cabinet doors for
broadband EMI attenuation.
106
www.lairdtech.com
Amplifier Performance
24
23
22
21
20
19
18
17
16
0
Frequency (GHz)
Figure 2. P erformance of Amplifier in Open Condition
and Inside Enclosure
10
12
EMI ESSENTIALS
The amplifier was then measured inside the enclosure with the
Q-Zorb in place. The performance of the amplifier now mirrored
the open condition by absorbing the internal reflections and
surface currents. Figure 4 shows this measurement.
Variable Gain Amplifier Performance
24
23
22
21
20
19
18
17
13.0
16
2
10
Frequency (GHz)
Figure 4. Performance of amplifier inside enclosure showing performance
of Absorber Material (PN 2238)
12.5
12.0
11.5
11.0
10.5
10.0
0
10
15
Frequency (GHz)
Figure 6. Performance in Enclosure and Using Foam Absorber
107
www.lairdtech.com
EMI ESSENTIALS
EMI MODELING
SAMPLE KIT
108
www.lairdtech.com
The samples are 6x 4 in size and can be easily cut into specific
shaped pads. There are various thicknesses to evaluate. Generally
speaking the thicker the sample the better it will work at low
frequency. However if you are constrained by thickness, evaluate
the one that will meet the thickness requirements and then test
the electrical properties of the sample. To make even thicker test
samples the samples can be bonded together. This will allow the
designer to evaluate thickness vs performance.
PART
NUMBER
DESCRIPTION
THICKNESS
FREQUENCY
RANGE
2388
Q Zorb - RFSW
>10 GHz
2238
Q Zorb - RFSW
> 8 GHz
2240
Q Zorb - RFSW
> 4 GHz
2242
Q Zorb - RFSW
< 4 GHz
3535
CA-19
< 2 GHz
3536
CA-19
5206
RF Foam - RFLS
5092
RF Foam - RFLS
4106
RF Foam - RFRET
< 2 GHz
Insertion Loss
Broadband
Insertion Loss
Broadband
Insertion Loss
Broadband
EMI ESSENTIALS
APPLICATIONS
FIGURE 1.
FIGURE 3.
-1
10
12
14
16
18
16
18
-5
Reflection
Loss (dB)
Loss (dB)
-3
-5
-7
-9
-11
-10
-15
-20
-25
-30
-13
-15
2
10
12
14
16
-35
18
Frequency (GHz)
FIGURE 2.
Frequency (GHz)
Frequency
(GHz)
FIGURE 4.
10
12
14
16
18
-5
-5
Reflection Loss (dB)
Reflection
Loss (dB)
Loss (dB)
Q-Zorb Surface
Wave
(1.0
mm) Thick
Q-Zorb 0.040
in 0.040"
(1.0 mm)
Thick
P/N 2238
P/N
2238
-10
-15
-20
-25
-10
-15
-20
-25
-30
-30
-35
-35
Frequency (GHz)
Frequency
(GHz)
8
10
12
Frequency (GHz)
SIZE
THICKNESS
WEIGHT
TEMPERATURE
MAXIMUM
ELECTRICAL
PERFORMANCE
COLOR
2388
2388 -.25
24 x 24
12 x 12
.50 lb/sq ft
300 F
12-18 GHz
Gray
2388 - S
4 x 6
0.20
nominal
(.5 mm)
2238
2238 -.25
2238 - S
2240
2240 -.25
2240 - S
2242
2242 -.25
2242 - S
24 x 24
12 x 12
4 x 6
24 x 24
12 x 12
4 x 6
24 x 24
12 x 12
4 x 6
.040
nominal
(1 mm)
.94 lb/sq ft
300 F
8-18 GHz
Gray
0.60
nominal
(1.5 mm)
1.2 lb/sq ft
300 F
4-18 GHz
Excellent for surface
current attenuation
.125
nominal
(3.2 mm)
2.75 lb/
sq ft
300 F
1-18 GHz
Excellent for surface
current attenuation
PART NO.
www.lairdtech.com
14
BONDING
FIRE RETARDANT
RATING
RoHS Compliant
Sulfur-free
Supplied with
3M 9485 PSA
UL V0
Good general
weather and chemical
resistance Sulfur-free
Supplied with
3M 9485 PSA
UL V0
Gray
UL V0
Gray
UL V0
109
EMI ESSENTIALS
APPLICATIONS
Reflective Loss
0
-0.5
R Loss (dB)
3535
0.15 mm
-1.0
Size
-1.5
0.50 mm
-2.0
3536
3536-S
-2.5
-3.0
Permeability (1 MHz)
-3.5
Electrical resistivity ( /)
-4.0
-4.5
-5.0
0.05
3535-S
0.35
0.64
0.94
1.23
1.53
1.82
2.12
Frequency (GHz)
2.41
2.71
3.00
.020 x 4x 6
37
6 x 1010
3.1
1.9
Hardness (Durometer A)
Flammability
www.lairdtech.com
.006 x 4 x 6
.020 x 12 x 13
Specific gravity
Thermal conductivity
(W / mk)
110
.006 x 12 x 13
70 10%
1.0
UL94 V-0
EMI ESSENTIALS
APPLICATIONS
RFRET broadband foam is commonly used around
antennas to provide isolation or side lobe reduction.
It can be die-cut into components for EMI reduction
inside microwave cavities and is used to manufacture
antenna hats and test boxes. It can be encapsulated
into a textile cover for use outdoors and fabricated into
blankets, covers and other components. Recently, it has
been used for a combination air/EMI filter in networking
equipment. The product can be made UL 94 HF1 for such
applications.
-5
Size
-10
-15
Thickness
-20
Weight
-2
4106
24 x 24
4106 -.25
12 x 12
4106 - S
4 x 6
Temperature Maximum
-30
Color
-35
2
10
12
Frequency (GHz)
14
16
18
Environmental
0.50 nominal
.092 lb/sq ft
250 F
Gray
Withstands intermittent
exposure to water
without degradation
111
www.lairdtech.com
EMI ESSENTIALS
PART NO.
5092
.125 Thickness
SIZE
-10
5092 -.25
12 x 12
-20
5092 - S
4 x 6
.250 Thickness
THICKNESS
TEMPERATURE RANGE
COLOR
ENVIRONMENTAL
BONDING
24 x 24
-30
5206
24 x 24
-40
5206 -.25
12 x 12
-50
5206 - S
4 x 6
0.25
nominal
-85 250 F
Black
RoHS Compliant
Supplied
with
3M 9485
PSA
0.125
nominal
-85 250 F
Black
RoHS Compliant
Supplied
with 3M
9485 PSA
-60
-70
2
10
12
14
16
18
Frequency (GHz)
NOTES
112
The physical properties and electrical performance property above are typical for the material, but not intended for use in
specifications or for the acceptance inspection criteria because of variations in testing methods, conditions and configurations.
www.lairdtech.com
EMI ESSENTIALS
FIGURE 1.
113
www.lairdtech.com
ANTENNAS & RECEPTION | EMBEDDED WIRELESS | EMI | TELEMATICS | THERMAL | WIRELESS AUTOMATION & CONTROL
Americas: +1.800.634.2673
Europe: +49.8031.24600
ASEAN: +65.6243.8022
China: +86.757.2563.8860
India: +91.80.40740.400 x448
Japan: +81.45.473.6808
Korea: +82.10.8706.7469
Taiwan: +886.2.22901234 x163
www.lairdtech.com
EMI-CAT-ESSENTIALS 1213
Any information furnished by Laird and its agents is believed to be accurate and reliable. All specifications are subject to change without
notice. Responsibility for the use and application of Laird materials rests with the end user, since Laird and its agents cannot be aware
of all potential uses. Laird makes no warranties as to the fitness, merchantability or suitability of any Laird materials or products for any
specific or general uses. Laird, Laird Technologies, Inc or any of its affiliates or agents shall not be liable for incidental or consequential
damages of any kind. All Laird products are sold pursuant to the Laird Technologies Terms and Conditions of sale in effect from time
to time, a copy of which will be furnished upon request. Copyright 2013 Laird Technologies, Inc. All Rights Reserved. Laird, Laird
Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an
affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under
any Laird or any third party intellectual property rights.