engineeringcivil.com
http://www.engineeringcivil.com/m-25-mix-designs-as-per-is-10262-2009.html
Dear All
Again I am back with M-25 Mix Designs as per IS-10262-2009.
Regards
Raj Mohammad Khan
M-25 CONCRETE MIX DESIGN
As per IS 10262-2009 & MORT&H
A-1
Grade Designation
M25
Type of Cement
20 mm
310 kg/m3
0.45
50-75 mm (Slump)
Exposure Condition
Normal
Degree of Supervision
Good
Type of Aggregate
10
540 kg/m3
11
A-2
Cement Used
3.15
1.00
Chemical Admixture
2.884
2.878
2.605
0.97%
www.engineeringcivil.com/m-25-mix-designs-as-per-is-10262-2009.html
1/3
7/13/13
0.83%
10
1.23%
11
nil
12
nil
13
nil
14
15
15
2.882
16
A-3
36N/mm2
25N/mm2
A-4
0.45
0.43
A-5
186 Lit.
138 Lit.
Superplasticiser used
A-6
0.43
320 kg/m3
Which is greater then 310 kg/m3
A-7
62.00%
62.00%
38.00%
A-8
Mix Calculations
Volume of Concrete in m3
1.00
Volume of Cement in m3
0.10
2/3
7/13/13
Volume of Water in m3
0.138
0.00134
0.759
0.471
0.288
320
138
751
1356
Mass of 20 mm in kg/m3
977
Mass of 10 mm in kg/m3
380
1.60
0.43
We are thankful to Er. Raj M. Khan for sharing this information with us on engineeringcivil.com. We hope
this would be of great significance to civil engineers.
www.engineeringcivil.com/m-25-mix-designs-as-per-is-10262-2009.html
3/3