Pour No. :
Date:
01
02
LOCATION
03
REFERENCE DRAWING NO
04
MIX PROPORTION
05
QTY OF CONCRETE
06
07
08
REINFORCEMENT
09
10
FOR CONTRACTOR
FOR POWERGRID
CONCRETING
11
12
QTY OF CEMENT
a)
THEORETICAL
b)
ACTUAL
13
14
IDENTIFICATION OF CUBES
FOR CONTRACTOR
FOR POWERGRID
Location No.:
Date:
TOWER FOUNDATION
1. PIT MARKING
POWERGRID CORPORATION OF INDIA LTD.
Location No:-
Type of Tower:-
i)
----------------------------------------
ii)
Reference level
---------------------------------------
iii)
O.K./Not O.K.
iv)
O.K./Not O.K.
v)
Yes/No
vi)
As per profile/Actual
(Mtrs)
(Mtrs)
As per profile/Actual
O.K./Not O.K.
viii)
O.K./Not O.K.
ix)
Yes/No
x)
xi)
Yes/No
Yes/No
b) Possibly vol.
----------cum.
Signature...
Signature..
Name.
Name
Designation
(Site Supr./E1/E2/E3)
Date.
Date.
2. FOUNDATION CLASSIFICATION
POWERGRID CORPORATION OF INDIA LTD.
Location No.:
Name of Line:- 765 KV S/C SATNA- CHARKHERI OF SATNA-GWALIOR T/L,CKT-1,PACKAGE-P219-TW-07
Name of Contractor: M/S KEC
i)
Type of Tower:-
STRATA DEPTH
RECEIVING END
PIT C
STRATA DEPTH
PIT B
STRATA DEPTH
STRATA DEPTH
Trial pit details/
Bore log details
PIT D
SENDING END
PIT A
NOTE: CLASSIFICATION MAY ALSO BE GIVEN ON TRAIL PIT OR ONE PIT EXECAVATION BASIS.
a) Predominant soil
ii)
Sub soil water table details as on date.
PIT A
iii)
iv)
v)
vi)
PIT C
PIT D
vii)
PIT B
--------mtrs
Loc. No.
viii)
ix)
a)
b)
c)
d)
Loc. No.
xi)
xii)
--------------mtrs.
-------------Kg/m2
-------------degrees
As per Soil
Invest.
Actual
FOR CONTRACTOR
FOR POWERGRID
Signature.
Signature
Name..
Name.
Designation.
(Site Supr./E1/E2/E3)
Date
Date..
Approval
Site visited on..and details verified.
The classification of foundation is approved as
FOR POWERGRID
Signature.
Name:
Designation:
Date..
4.
STUB SETTING
POWERGRID CORPORATION OF INDIA LTD.
Location No.:-
Type of Tower:-
i)
..
ii)
Pit Dimensions
..
a) Depth of pits
iii)
From Ref.Level
Ground Level
Pit A
Pit B
Pit C
Pit D
b) Pit dimensions are as per approved foundation classification
Yes/No
Yes/No
Yes/No
Alignment of template.
a) Tangent Tower
a.a) In the direction of line
b) Angle Tower
b.a) Angle of deviation
b.b) Alignment of template on bisection
iv)
Yes/No
...degrees
Yes/No
Diagonals of template.
AC.m
BD.m
0 = Angle of Deviation.
PQ = Line of Bisection.
(Line AD and BC are
Perpendicular to PQ)
Yes/No
vi)
OK/Not OK
vii)
Clearance between lowest part of stub and base of pit (Not less
than 15 cm or as specified in the drg.)
Leg A...cm
Leg B...cm
Leg C...cm
Leg D..cm
viii)
of pit
OK/Not OK
ix)
All members of template are fixed as per drg. and fully tightened
Yes/No
x)
Checking of stubs
a) Stub dimensions are as per type of tower
b) All plates/cleats fixed with reqd. no. of Nuts/Bolts and are fully
tightened
Yes/No
Yes/No
FOR POWERGRID
Signature.
Signature
Name
Name..
Designation..
(E1/E2/E3)
Date
Date
5.
CONSTRUCTION MATERIALS
Location No.:-
Type of Tower:-
ii)
Quantity Avail
Approved Source
Quantity Required
Quantity Avail
Approved Source
20 mm
40 mm
OK/Not OK
Quantity of Coarse
Aggregate
Quantity of Fine
aggregate
Quantity of Cement
M - 10
6 Boxes
3 Boxes
1 Bag
M - 20
3 Boxes
1.5 Boxes
1 Bag
Quantity of water
1Box less 1
litere(34.1 lit)
1box less 1 lit(30)
Dia. (MT)
Qty. Avail
Apprd. Source
6 mm
10 mm
12 mm
16 mm
20 mm
25 mm
. mm
. mm
vii)
viii)
Form Boxes.
a) Dimensions are per apprd. Drgs.
b) Oiling of inner wall of form boxes
T & P and man power as per Annexure IA & IB are at
available at site.
OK/Not OK
OK/Not OK
Yes/No
x)
Yes/No
Yes/No
Yes/No
Yes/No
OK/Not OK
Yes/No/Not Required
As per Design
Yes/No
Actual
.Cu.m.
CERTIFICATE:- Pits are cleared for installation of reinforcement and form boxes.
FOR CONTRACTOR
FOR POWERGRID
Signature..
Signature...
Name...
Name..
Designation.
Date...
(E1/E2/E3)
Date..
6.
Location No:-
Type of Tower:..
..
ii)
Reinforcement steel
a) Quality/Qty. as per specification
b) Bending/Placing as per apprd. Drg.
c) Required no. of chairs approved
d) Binding done as per specifications.
e) Any undue stress or bending of steel bars
f) Steel is clean and free from loose rust or any other foreign matls.
g) Position of bars W.r.t. stub as per drg.
iii)
Yes/No
Yes/No
Yes/No
Yes/No
Yes/No
Yes/No
OK/Not OK
OK/Not OK
Yes/No
Yes/No
iv)
Yes/No
v)
Yes/No
FOR POWERGRID
Signature..........
Signature...
Name.
Name....
Designation
(E1/E2/E3)
Date..
Date
7.
Location No.:-
Type of Tower:-
i)
ii)
Mix Ratio
..
iii)
Yes/No
Yes/No
Yes/No
Mixing done by
a) Mixer (Running time-2 min.)
b) Hand mixing (with 10% extra cement or as specified in LOA)
Yes/No
Yes/No
iv)
Yes/No
v)
Yes/No
vi)
OK/Not OK
vii)
Yes/No
viii)
ix)
Yes/No
x)
Yes/No
Twr. Leg
Pyramid (Date)
As per drg.
Chimney (Date)
Actual
No. of Cubes
A
B
C
D
xi)
xii)
xiii)
xiv)
Yes/No
Yes/No
Yes/No
Yes/No
xv)
Yes/No
Yes/No
Yes/No
Yes/No
Yes/No
Yes/No
Yes/No
Yes/No
Certificate:- Foundation is cleared for tower erection subject to fulfillment of part (I) before tower erection
and part (II) in due course as per planning.
Part (I)
Part (II)
FOR CONTRACTOR
FOR POWERGRID
Signature.
Signature...
Name..
Name
Designation.
(E1/E2/E3)
Date
Date..
28 days
Yes/No
Yes/No
Date.
Date..
Location of site
(2)
Source of supply
Size of Aggregate
: Source
40 MM
20 MM
Fine Aggregate
(3)
(4)
The samples have been sealed and identification mark slip duly signed has been placed inside the bag & another
slip duly signed has been pasted on the bags.
Date..
Date.
Location of store/site
(2)
Source of Supply
(3)
Diameters of rods.
(4)
Length of rods.
(5)
Lot No.(s)
(6)
(7)
The samples have been wrapped together & placed inside the bag. One identification mark slip duly signed has
been placed inside the bag & another slip duly signed has been pasted on the bag.
Date..
Date.
SL. NO.
..
LOCATION NO.
..
TYPE OF TOWER
COMPLETION DATE
WEIGHT OF TOWER
FOR CONTRACTOR
FOR POWERGRID
Signature:
Signature:
Name:..
Name:..
Designation:.
Designation:.
Date:
Date:.