WORK NO.
Tender Documents
For
Construction of Rising Main, Grit Chamber, Screen Chamber, Primary Settling
Tank, Pumping Station, Pumping Machinery, Compound Wall, and M & R of 2
years for Nanachiloda Under Ground Drainage project.Nanachiloda of West AUDA
Area
Rs.6,87,61,861.00/-
Name of Work:
Construction of Rising Main Grit Chamber, Screen Chamber, Primary Settling Tank, Pumping Station, Pumping
Machinery, Compound Wall, and M & R of 2 years for Nanachiloda under Ground Drainage project.
Nanachiloda of West AUDA Area
(Percentage Rate Tender)
Signature of Contractor
Name:
Companys seal:
Date:
Date:
1
Description
Providing, Supplying, Lowering, Laying &
Jointing ISI Standard R.C.C. pipes of
(Sulphate Resisting Cement) in standard
lengths of following class and diameter
suitable for rubber ring joints including all
taxes, insurance, transportation, freight
charges, octroi, inspection charges, loading,
unloading, conveyance to departmental
stores, stacking etc. complete. (IS - 458/
1989) for following dia. One rubber ring
should be supplied with each full length
socketed pipe, cost included in rates below.
Class NP3 Test Pressure, 0.7 Kg / Sq.cm.
600 mm dia.
Providing, Supplying, Lowering, Laying
and Jointing D.I. K-9 grade pipes for
following nominal bore diameter with
internal cement mortar lining including all
taxes, insurance, transportation, freight
charges, octroi, inspection charges, loading,
unloading, conveyance to departmental
stores, stacking etc. complete. (IS 83292000).
400 mm dia pipe
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
10.00
3218.31
Rmt
32183.15
6446.00
4550.20
Rmt
29330598.87
Item
No.
Description
200 mm Delivery Pipe
300 mm Delivery Pipe
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
15.00
2041.92
Rmt
30628.80
15.00
3437.84
Rupees
Three
Thousand
Four
Hundred Thirty Seven and Eighty Four
Paise Only
Rmt
51567.60
13.00
6609.59
No.
85924.69
1.00
21161.07
No.
21161.07
Item
No.
Description
5A
5B
Quantities
Rate in Rs.
7714.00
102.21
850.00
360.07
2290.00
146.35
1897.00
Rate in Word
Unit
Amount in Rs.
Cum
788463.37
Cum
306055.25
Cum
335139.21
160.29
Cum
304064.44
1552.00
243.92
Cum
378556.08
1235.00
262.50
Cum
324186.27
Sixty
and
Item
No.
Description
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
971.00
283.41
Cum
275187.23
686.00
307.80
Cum
211149.09
438.00
333.35
Cum
146007.52
322.56
362.39
Cum
116891.87
8.00
2675.49
Cum
21403.92
3942.03
Rupees
Three
Thousand
Nine
Hundred Forty Two and Three Paise
Only
Cum
47304.36
12.00
Item
No.
Description
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
179.00
5224.43
Cum
935172.43
91.10
9037.63
Cum
823306.54
Vertical walls
255.98
8878.51
Cum
2272712.86
9.00
9374.47
Rupees
Nine
Thousand
Three
Hundred Seventy Four and Forty Six
Paise Only
Cum
84370.20
Beam
Item
No.
10
Description
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
Column
1.49
10398.91
Cum
15541.59
Slab
1.67
9037.63
Cum
15131.25
Slab
28.52
8892.44
Cum
253623.53
Column
5.89
10269.98
Cum
60486.09
Beam
11.38
9225.79
Cum
104955.41
0.42
8892.44
Cum
3725.49
wheathershad
0.47
8892.44
Cum
4216.73
Providing and cast in situ C.C. in grade M25 proportions of ingredients as per mix
design by weigh batching using granite,
quartzite trap metal of size 12 mm to 20 mm
and or 6 mm to 12mm including scaffolding
centering formwork, needle vibrated
consolidation, curing and hydraulic testing
etc.
complete
(excluding
cost
of
reinforcement) up to 6 meter height /depth
Av. G.L.for all water retaining structures.
Item
No.
11
12
Description
Supplying cutting, bending, binding and
placing in position steel as per plan and
design and as per ISS 2502 including cost of
steel and binding wire for reservoirs/
structures only including lift up to 6 meter
height or depth as per design. For all
diameters.
Do-Thermo mechanically treated (TMT)
bars Fe-415 grade for all diameters. (ISS
1786)
Construction of valves chambers in brick or
bela stone masonry, locally available in C.
M. 1:6.Foundation concrete 150 mm thick
in C. C. 1:4:8of trap metal size 25 mm to 40
mm thick, inside cement plaster in C. M.
1:3 and cement pointing outside in C. M.
1:3 and top cover of precast RCC slab 100
mm thick (with key hole in two parts, each
with handles or MS Bar etc. complete as
given size) Upto 1 Mt. depth from G. L. to
pipe invert level incl. complete civil works
but excl. cost of excavation and refilling.
With 23 mm thick brick masonary wall in
C.M.1:6 etc completed.
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
47.09
60679.79
Mt
2857411.31
No.
12731.20
No.
112823.46
1.00
12731.20
13.00
8678.73
Item
No.
13
14
15
16
17
Description
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
Rmt
3411.91
0.50
6823.81
6.50
5023.49
Rmt
32652.67
60.00
858.50
Sqm
51510.00
241.00
3755.18
Cum
904998.38
518.00
81.31
Sqm
42115.99
13938.00
26.71
Cum
372346.70
3946.00
82.47
Cum
325412.81
Item
No.
Description
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
18
1.00
1928857.60
Nos.
1928857.60
19
212.00
65.65
kg
13917.80
40.00
68.68
Nos.
2747.20
1.00
1748027.20
Nos.
1748027.20
1.00
1515000.00
Set
1515000.00
11.00
48.48
Cum
533.28
20
21
22
23
Item
No.
24
25
Description
A Drilling of 900mm dia Horizontal
borehole for Sewermain pipeline crossing
under the road incl in all strata with requried
length incl fixing of 800 mm dia M.S/RCC
casing pipe with pushing etc complete
various size of pipe for 406.4 to 508 mm dia
Watermain.(45
Mt.
Length)
400 mm Dia (Highway crossing)
Drilling of 900mm dia Horizontal borehole
for Sewermain pipeline under the railway
tracks incl strta with required lengthincl
fixing of 800mm dia M.S.casing pipe with
welding pushing etc complete various size
of pipe for 406.4 mm to 508 mm dia
Sewermain incl providing& fixing of
required size of G.I/M.S pipe for railway
permises as per instruction of Railway
authority & under supervision of Railway
authority incl Provinding &supplying fixing
of ISI make sluice valve of required size at
both side of railway boundry with
construction of brick age pavement incl
C;C; 1:3:6 encasing of pipe at both side
Provinding & fixing of M.S/Iron Manhole
frame with cover for valve chamber with
loacking arregment etccomplet with all
material labour fabrication,hydralic testing
of pipe & valve etc complete (45 mt
Length)
400 mm Dia(Railway crossing)
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
1.00
1126993.00
Job
1126993.00
1.00
1272253.67
Job
1272253.67
10
Item
No.
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
301.00
232.30
Sqm
69922.30
258.00
101.61
Sqm
26214.35
28
138.00
126.25
Sqm
17422.50
29
1108.00
228.82
Sqm
253528.24
30
498.00
214.42
Sqm
106782.93
26
27
Description
Providing & laying cement concrete
flooring 1:2:4 (1 cement: 2 coarse sand: 4
graded stone aggregate 20 mm nominal
size) laid in one layer finished with a
floating
coat
of
neat
cement.
(a) 40 mm Thick
Providing 10 mm. thick cement plaster in
single coat on brick/concrete wall for
interior plastering up to floor two level
finished even and smooth in [I] Cement
mortar 1:3 (1 cement : 3 fine sand)
11
Item
No.
Description
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
31
1295.00
5.66
Sqm
7324.52
32
498.00
41.92
Sqm
20873.67
33
104.00
118.17
Sqm
12289.68
34
50.00
988.44
Kg
49421.83
12
Item
No.
35
36
Description
Providing and fixing rolling shutters of
approved make made of 80mm wide MS
Laths inter locked together through their
entire length and jointed together at the ends
by end lokes mounted on specially designed
pipe shaft with bracket plates, guide
channels and arrangements for inside and
outside locking with push pull operation
complete including the cost of hood cover
and
spring
etc.
complete
A) shutters having width below3.5 mt
Providing and fixing extruded aluminum
window having extruded aluminum Colour
anodized section frame main outer size
127mm x 38.10mm x 1.35mm (of Jindal
Section no: 2443, @ Wt. 1.384 Kg/mt),
horizontal Four track member size 122.20 x
31.75m x 1.10mm (of Jindal Section
no:8787, @ Wt. 1.205Kg/mt), vertical
member of size 122.20x 31.75mm x
1.50mm (of Jindal Section no:8935, @ Wt.
1.398 Kg/mt) with sliding shutters of
horizontal member size 40mm x 18mm x
1.29mm (of Jindals Section no: 8949 @ wt
of 0.456 Kg/mt), vertical member of size
40mm x 18mm1.29mm (of Jindal Section
no:8947 @ wt. of 0.456 Kg/mt, Section
8948, @ Wt. 0.457 Kg/mt) with 5 mm thick
transparent bronze colour tinted float glass
with powder coated aluminum fittings and
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
9.00
3289.57
Sqm
29606.13
4.32
2920.92
Sqm
12618.37
13
Item
No.
Description
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
37
24.70
3255.68
Rmt
80415.41
38
50.60
1207.96
Rmt
61122.78
39
1.00
6090.91
No.
6090.91
14
Item
No.
Description
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
40
1.00
677205.00
No
677205.00
41
13.00
1171.60
Rmt
15230.80
42
2.00
586.81
No
1173.62
43
Exhaust
fan
Supplying & erecting single phase approved
make industrial exhaust fan suitable for
medium duty ring mounted low noise
operation suitable for medium duty having
following dia size and maximum speed in
RPM
[C]
305
mm
dia
900
RPM
Cat-II
2.00
2448.24
Nos
4896.48
44
10128.28
No
10128.28
1.00
15
Item
No.
Description
45
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
47.53
1630.34
Cum
77495.57
46
16.00
6103.43
Qtl
97654.88
47
Sluice
Gate
Providing, Supplying & Fixing, manually
opereted, C.I., spigot, single phase, Sluice
Gate of following Size with Cast Iron
Frame and shutter, Brass Seats, M.S. Rising
Spindle and headstock, guide bracket as per
IS.
3042
etc
complete.
700 x 700
216525.82
No
649577.46
3.00
16
Item
No.
Description
48
Quantities
Rate in Rs.
Rate in Word
2.00
1112440.26
17
Unit
Amount in Rs.
2224880.52
Item
No.
49
50
Description
Quantities
Rate in Rs.
2.00
1565737.05
For PST
1.00
218894.27
3056.00
127.26
4365.00
135.34
CHECK VALVE/NRV
Providing
,
supplying,
testing
&
commissioning of C.I.D.F. NON RETURN
VALVE of PN 1.0 rating with CI FG-260
body & Door, Hinge & Hinge pin of SS 410
and as per latest revision of IS 5312 for
following sizes. For additional parameters
refer specifications.
200 mm Delivery Pipe
2.00
15019.71
2.00
33042.15
18
Rate in Word
Unit
Amount in Rs.
3131474.09
218894.27
kg
388906.56
Kg
590759.10
No
30039.42
No
66084.30
Item
No.
Description
51
52
53
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
2.00
918.75
No
1837.49
2.00
1413.55
No
2827.09
Expasion Bellows
Providing testing of corrogate design
stainless steel expansion bellows with
flanges,15mm axial movement,300mm
overall length with tie roads,nuts etc.
400 mm Header Pipe
1.00
22466.44
No
22466.44
No
19375.84
No
28318.38
2.00
9687.92
2.00
14159.19
1.00
107375.63
No
107375.63
2.00
64766.25
No
129532.50
19
Item
No.
Description
200 mm Delivery Pipe
54
55
Pressure Gauge
Providing, erecting Bourdon type glycerine
filled pressure gauge complete with syphon
tube with isolating cock having range of 0
to 20 kg/cm2 as per IS 8793.
150 mm Dia.
Supply of Full Bore Electromagnetic flow
meter with 0.5% calibrated, Ip-68, Battery
backup, flanged connection, Flow sensor,
indicator, trancmitter and totalizer with all
accessories viz. power and Control cabels
up to starter panel, cabinates, hard wares,
eyc.
complete
as
per
following
specification:
(I) Flow Sensor:
Neoprene/ Polyurethane lining, DC pulsed,
SS 316 electrodeds, CS/ SS 316 flanges,
Fully welded/ SS 304 sensor contrucxtion &
housing
(II) Flow transmitter/ coverter:
Microprocessor based/ Modular design/
HART type, 2line back lit LCD for
indication of actual flow rate, forward,
reverse, sum totalizer display, One current
(4-20 mA)/ one scalable pulse/ one status
output, IP 67, Die cast alluminium with PU
finish with glass window enclosure, 10
meters length sensor cable
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
2.00
29542.50
No
59085.00
2229.58
No.
8918.30
No
589845.96
4.00
1.00
589845.96
20
Item
No.
Description
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
11 KV DP Structure
Supply,
installation,
testing
&
commissioning of 11 KV two pole structure
made of 6" X 3" 'I' section girder having
min. 8mtr length, 4" X 2" channels, clamps,
hardware etc. suitable for erection of
following accessories duly connected with
ACSR conductors as per approved drawings
& in compliance with requirements of IEC
(without
earthling&
copper
plate).
(a) 11 KV 200 amps drop out fuses with
S.R.B.P.
tubes
carries
(03
nos.)
(b) 11 KV G.O.D. switch complete with
insulators, operating handle with galvanized
pipe, square bar etc. 400 amperes (01 set).
(c) 11 KV lightning arrestors with clamps
(03
nos.).
(d) 11 KV shackle insulators (06 nos.).
(e) 25 mm X 3 mm thick copper earth strips
in two parallel runs in required quantity i. e.
from LA to earthling chamber.
1.00
138763.90
No
138763.90
400 mm NB
56
21
Item
No.
57
Description
SITC of funnel type Earthling having earth
plate of following size buried in specially
prepared earth pit of reqd. mtr below ground
with 40.0 kg charcoal and salt with alternate
layers of charcoal and salt 20 mm dia GI
pipe with funnel with wire mesh for
watering and brick massonary block and
C.I. cover complete as per para 7.3 of IS
3043 with necessary length of double G.I. /
copper earth wire no-6 swg bolted with lug
to the paltened covered in 12 mm dia G.I.
pipe 2.5 mtr long complete connected to the
reqd point of DP with end socket as per
direction and duly tested by earth tester
confirming to ISS.as per drawing &
specifications. Comp.With 30 x 30 x 0.35
cm CI earth plate Comp.
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
2.00
3833.96
Rupees
Three
Thousand
Eight
Hundred Thirty Three and Ninety Six
Paise Only
No
7667.92
22
Item
No.
Description
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
58
11
KV
H.T
Panel
Provinding,erecting,testing
and
commissioning extensible H.T Panel
comprising of 400 A H.T VCB incoming
and two outgoing 400A draw out type
vacuum circuit breaker conforming to
IS:2516(Part I & II sec.I) for use on 11 KV,
3 Ph, 50 cyle, unearthed A.C supply system
having braking rupturing capacity of 350
MVA complete with spring operated
mechanism,mechnically
ON-OFF and
spring mechanism charged, discharged
indicators, ON-OFF mechanical push
button, operation counters necessary
auxiliary switches, closing shunt trip , air
insulated busbar chamber having heat
shrinkable PVC sleeves, mechanical
interloacks safety shutters, isolating plugs
and a VCB trolley with three vaccum
interrupters with epoxy support insulators
and self alighning finger type isolating
contacts. The Braker shall be Manual Cum
motorized mechanism with following
accessories.
1) 144 mm square flush mounting type Ameter and Volt meter with selector
switches.-Three
sets.
2) Power factor meter. One No.
1.00
1124130.00
Each
1124130.00
23
Item
No.
Description
59
H.T
Cable
Supply and erecting XLPE as per IS
Marked
armourd
cable
alluminium
conductor for 11 KV.(UE)
3 core, 240 Sq.mm Alu. Armourd Cable
60
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
100.00
3737.40
No
373740.40
2.00
2846.18
No
5692.36
2.00
14998.50
No
29997.00
Cable
Jointing
KIT
Disconnecting the cable connecting and
providing straight/ T joint with PVC mould
using epoxy compound insulating material
and making the joint complete using
necessary in line connectiors, hardner, earth
continuity connection, spacers etc, and
reconnecting the same and ensure the joint
resistance within the limits as per IS.
Straight
120 to 300 sq.mm cable
61
Quantities
joint
H.T
cable
termination
out door termination kit 6.6 KV (UE)/11
KV (E) XLPE screened 3 core cable
24
Item
No.
Description
62
Transformer
1) Supply of distribution transformer with
no load voltage ratio 11/0.433 kV,
continuously rated for 3-, 50 Hz, outdoor /
indoor type, ONAN cooled, copper double
wound, core type, vector group Dyn 11, HT
delta connected and LT star connected, oil
immersed winding with temperature rise in
oil / winding 50/ 55 deg. C above ambient
temperature with neutral brought out
connected to provide separate earthing
including terminal arrangement bushing /
cable box on HT side and cable box on LT
side suitable for cable box or bus duct with
following acceptable values of no load /
load losses @ 75 deg. C & impedance (with
tolerances as per IS) complete with first
fill of oil along with following accessories
including routine test @ factory as per IS
2026 & its latest amendments as per data
sheet & detailed specifications.
Quantities
Rate in Rs.
25
Rate in Word
Unit
Amount in Rs.
Item
No.
Description
Quantities
Rate in Rs.
26
Rate in Word
Unit
Amount in Rs.
Item
No.
63
Description
150 mm dia magnetic type oil gauge (For
rating 1600 kVA)
Inspection cover & jacking lugs (For rating
1600 kVA)
With off circuit tap changer - 10 % to + 5%
in steps of 2.5%
315
KVA,4%,Impedance,11KV/0.433KV,DYN
11
Moulded Cast Circuit Breaker
Approved Make Four pole moulded cast
circuit breaker having breaking capacity
ICU of 50 KA at 415 V having normal
current rating up to 630 A with veriable
thermal and magnetic release suitable to
work on AC supply 50 cys with all internal
connections and complete erected in 16
GMS hosing on angle frame.
Cat.III, ICS=100% of ICU
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
2.00
433257.68
Set
866515.36
3.00
22271.51
No
66814.53
Item
No.
Description
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
3.00
6363.00
No
19089.00
3.00
12832.05
No
38496.15
6 to 32 Amp, Cat.III
6.00
721.14
No
4326.84
40 Amp, Cat.III
3.00
901.93
No
2705.79
64
65
Miniature
Circuit
Breaker(TPN)
Providing and erecting 415 V MCB four
pole switch for motor and inductive load
(C-curve) having 10 KA breaking capacity
and conforms to IS 8828 in existing box
having following capacity.
Item
No.
Description
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
3.00
361.58
No
1084.74
Cat.III,
12.00
138.37
No
1660.44
1.00
1555.40
No
1555.40
6 to 32 Amp, Cat.III
66
67
29
Item
No.
Description
68
Quantities
Rate in Rs.
30
Rate in Word
Unit
Amount in Rs.
Item
No.
Description
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
15.00
10918.10
Sqm
163771.50
15.00
272.70
No
4090.50
69
70
Microprocessor
based
soft
starter
Supplying fully automatic microprocessor
based soft starter with built in bypass
terminal for pump control application as per
general specification as under.
Control method- torque control
Input Voltage- 3 phase 415 V
in Put frequency - 50/60 Hz (+- 5%)
Confirmative to standard - IEC 947-4-2UL,
CSA, CE
Motor Protection - inbuilt thermal
protection
Starter protection- S/C, U/V, Phase
unbalance, phase failure
EMC - Standards- IEC61000-4 2 level-3 &
IEC61000-4 level-3
31
Item
No.
Description
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
55 KW
2.00
94687.50
No
189375.00
110 KW
2.00
136350.00
No
272700.00
1.00
9743.47
Rupees
Nine
Thousand
Seven
Hundred Forty Three and Forty Seven
Paise Only
No
9743.47
1.00
275730.00
No
275730.00
71
32
Item
No.
Description
72
73
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
15.00
5842.85
RMt
87642.75
LT
cable
Supply and erecting XLPE (IS 7098) (I)-88
ISI
marked
armored
cable
multistringaluminum conductor for 1100 V
to be laid on wall with necessary clamps or
in existing cable trench/pipe at road
crossing or floor of following size of cable.
3.5 core, 240 Sq.mm
100.00
1022.12
Mtr
102212.00
300.00
325.22
Mtr
97566.00
250.00
191.90
Mtr
47975.00
33
Item
No.
74
75
Description
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
4 core 4 sq.mm
400.00
81.81
Mtr
32724.00
4 core,10 sq.mm
75.00
111.10
Mtr
8332.50
Cable
gland
Supply and fixing heavy duty flange type
brass cable glands with rubber ring for
suitable size PVC armored cable complete
without going tails, insulating taps etc. For
following size of cables.
3 to 4 core 4.5 sq.mm
30.00
29.29
No
878.70
4 core 10 sq.mm
25.00
35.35
No
883.75
10.00
64.64
No
646.40
20.00
98.98
No
1979.60
20.00
244.42
No
4888.40
Cable
lugs
Supplying and erecting crimping type
aluminum/copper lugs conforming to IS
suitable for cable as below evenly crimped
with high pressure tool and connected to
switchgear terminal with brass/cadmium
plated nut bolts in an approved manner.
2.5/4/6 sq.mm Aluminum
75.00
4.04
No
303.00
10 sq.mm Aluminum
50.00
8.08
No
404.00
34
Item
No.
76
77
Description
Quantities
Rate in Rs.
25 Sq.mm,Aluminium
50.00
10.10
70 Sq.mm Aluminium
30.00
Unit
Amount in Rs.
No
505.00
18.18
No
545.40
25.00
63.63
No
1590.75
50.00
429.25
Mtr
21462.50
300 mm wide X 35 mm X 2 mm
25.00
797.90
Mtr
19947.50
15.00
250.48
Pt.
3757.20
Internal Lighting
Point wiring for light/bell with 2.1.0 sq.mm
and earth wire of 1.0 sq.mm(green) both are
of ISI marked FR PVC insulated
multistrand copper wires, in existing pipe
duly erected complete with 6A modular
type switch / bell push and accessories and
earth continuity of following type erected
on PVC/ metallic box covered with
appropriate
erected
concealed
in
wall/ceiling.
Single mounting base frame and
Textured/metallic
front
plates.
Cat.II
35
Rate in Word
Item
No.
78
79
80
Description
Point wiring for fan with 2.1.0 sq.mm and
earth wire of 1.0 sq.mm (Green) both fare of
ISI marked FR PVC insulated multistring
copper wires, in existing pipe duly erected
complete with 6A modular type switch and
hum free EME 5/6 step type electronic fan
regulator with separately mounted and
accessories with earth continuity of
following type erected on PVC metallic box
covered concealed in wall/ceiling.
Single
mounting
base
frame
Textured/metallic
frount
plates.
Cat.II
Point wiring for Individual plug with 2.1.0
sq.mm & earth wire of 1.0 sq.mm (Green)
both are of ISI marked FR PVC insulated
multistrand copper wires, in existing pipe
duly in erected complete with 6A 5 pin plug
erected on PVC/metallic box covered with
approprite front plate modules erected
concealed in wall/ceilling with following
type of accessories.
Single
mounting
base
frame
Textured/metallic
frount
plates.
Cat.II
Point wiring for looped plug with 6 A
Modular type switch and 6A 5Pin socket
erected on PVC/metallic box covered with
approprite front plate modules erected
concealed in wall/ceilling with following
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
3.00
592.87
Pt.
1778.61
5.00
360.57
Pt.
1802.85
36
Item
No.
Description
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
5.00
232.30
Pt.
1161.50
100.00
28.28
Rmt
2828.00
25 mm
50.00
17.17
Mtr
858.50
10.00
833.25
No
8332.50
type of accessories.
81
82
83
Single
mounting
base
frame
Textured/metallic
frount
plates.
Cat.II
Conduits
&
Pipes
Providing and erecting 1.5 mm thick FIA
approved and ISI mark (embossed) RIGID
PVC pipes of following size complete
erected with necessary PVC fitting and
junction boxes fixed with adhesive solution
and clamps with following type of erection.
1) For Open execution with clamps erecting
on wall/ceiling of following size of
Diameter.
25 mm
Providing & erecting PVC corrugated
Flexible Conduit with required nos of
coupling, PVCbuses, check-nuts etc,
complete of following sizes.
37
Item
No.
84
85
86
Description
Supplying Steel tubular pole conforming to
IS-2713 (Part-II) 1980. Manufacturing
Process of steel tubular pole should be as
per IS Specification. Basic steel tube should
be ISI Marked. Pole should be painted by
one coat of Zinc comet Primer and two coat
Aluminium/approved paint to be erected
on/in existing foundation. The length of
poles are below.
8.5 Mtr Long swaged steel tubler pole
i) Pole as per IS code 410-SP-4 with 300 X
300 X 4 mm base plate.(Approximate pole
weight 67 Kg) for burial erection.
ii) Add Extra for M.S base plate 300 X 300
X16 mm for ploe, suitable for mounting on
surface of foundation with foundation bolts,
with required stiffeners welded with pole..
iii) Add extra for PU base primer and PU
Paint on pole.0
Approved make high pressure sodium
vapour
lamp,
Tubular/Elliptical
type
150
watts
230/240/250 V. erected if require.
Earthling
Providing and erecting required size HOT
deep galvanized strip for earthing of HT
OCB/ACB/Transformer LT Panel board
motors etc, using coppe clamp.
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
5.00
8413.30
No
42066.50
5.00
1020.10
No
5100.50
5.00
464.60
No
2323.00
5.00
606.00
No
3030.00
250.00
52.52
Kg
13130.00
38
Item
No.
87
88
89
90
Description
Providing and erecting required size copper
strip
for
earthling
of
HT
OCB/ACB/Transformer LT Panel board
motors etc.using coppe clamp.
Provdingand erecting HOT deep Galvanized
strip iron wire 8 to 16 SWG
Supplying and erecting earth pit of
minimum bore dia 150 mm size approved
make safe earthing electrode consisting
pipe-in-pipe technology as per IS 30431987 made of corrosion free GI pipe having
outer pipe dia of 50mm having 80-200
Micron galvanizing, Inner pipe dia of 25mm
having 200-250 Micron galvanizing
connection terminal dia of 12mm with
constant ohmic value surrounded by highly
conductive compound with high charge
dissipation suitable for following type of
applications.
For
Electrical
installation
covering
transformer neutrals, lighting arrester
earthing, AC plant and sensitive computer
system (like Automation, scada) i.e.
independent earthing in normal soil length
of Pipe 3.00 mtr. Back filling compound 2
no bag of 25 Kg.
Providing one bag of 25 kg additional back
filling compound (BFC) suitable for safe
earthing device.
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
75.00
413.09
Kg
30981.75
100.00
58.58
Kg
5858.00
4.00
10453.50
No
41814.00
4.00
859.51
No
3438.04
39
Item
No.
91
92
93
94
95
96
Description
Providing printed instruction chart both in
English and Gujarati and duly framed with
front glasses, for treatment of person
suffering from electric shock.
Providing pair of rubber hand gloves
suitable for working on 11 KV/22 KV
supply.
Supplying rubber matting of 6 mm
thickness as per IS 5424 and of require
length and breadth with good insulation
properly for 22 KV.
Supplying stand first AID box with
antiseptic, medicine for use on wound due
burn, creap bandage, medicated ready to use
bandage (Band-aid) adhesive tape for
medicinal user, Scissors, anti-septic
solution( Savlon or similar) etc.(All above
contents shall be of standard makes)
Supplying FIRE bucket round bottom of 9
liters capacity made out 24 gauge G.I sheet
with extra handle at bottom duly painted
white inside and Red out side with FIRE
mark,filled with dry-sand and kept on
existing stand provided or huge on wall
hook.
Operation and maintenance and repairing of
Nanachiloda u/g Drainage Scheme in all
respect. I.e. all the components executed under
this tender mainly pumping machinery,
pumping station. Rising Main, Screen chamber
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
2.00
151.50
No
303.00
2.00
252.50
No
505.00
25.00
999.90
Sqm
24997.50
2.00
353.50
No
707.00
4.00
252.50
No
1010.00
205285.83
Month
2463430.00
12.00
40
Item
No.
Description
Quantities
Rate in Rs.
Rate in Word
Unit
Amount in Rs.
205285.83
Month
2463430.00
Total Rs.
68761861.00
12.00
41
I / We am / are willing to carry out work at _____________________ % above / below* percent (should be written in figures and words) of the
estimated cost, as mentioned above. Amount of my / our tender works out for Rs.__________________ (in figures) Rupees
__________________________________________ (in words)
Note: * Please strike out above or below, whichever is not applicable.
Signature of Contractor
Name:
Companys seal:
Date:
Date:
42